Cis- and trans-titanium complexes with doubly silyl-bridged dicyclopentadienyl ligands: molecular structure of [(TiCl)2(μ-O){(SiMe2)2(η-C5H3)2}]2(μ-O)2

The reaction of TiCl₄ with Li₂[(SiMe₂)₂(η⁵-C₅H₃)₂] in toluene at room temperature afforded a mixture of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] in a molar ratio of 1/2 after recrystallization. The complex trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] was hydrolyzed immediately by the addition of water to THF solutions to give trans-[(TiCl₂)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] as a solid insoluble in all organic solvents, whereas hydrolysis of cis-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] under different conditions led to the dinuclear μ-oxo complex cis-[(TiCl₂)₂)(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] and two oxo complexes of the same stoichiometry [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ as crystalline solids. Alkylation of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] with MgCIMe led respectively to the partially alkylated cis-[(TiMe₂Cl)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] and the totally alkylated trans-[(TiMe₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] compounds. The crystal and molecular structure of the tetranuclear oxo complex [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ was determined by X-ray diffraction.     

Dinuclear sulfide–thiolate complexes [Pt2(μ-S)(μ-SR)(PPh3)4] as cationic metalloligands

The cationic monoalkylated derivatives of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄], viz. [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (R = n-Bu, CH₂Ph) are themselves able to act as metalloligands towards the Ph₃PAu⁺ and R′Hg⁺ (R′ = Ph or ferrocenyl) fragments, by reaction with Ph₃PAuCl or R′HgCl, respectively. The resulting dicationic products [Pt₂(μ-SR)(μ-SAuPPh₃)(PPh₃)₄]²⁺ and [Pt₂(μ-SR)(μ-SHgR′)(PPh₃)₄]²⁺ are readily isolated as their hexafluorophosphate salts, and have been fully characterised by spectroscopic techniques and an X-ray structure determination on [Pt₂(μ-SR)(μ-SHgFc)(PPh₃)₄](PF₆)₂.     

Comparison in halide binding ability between the unsaturated clusters [Pd3(μ-dppm)3(CO)] and [PdPtCo(μ-dppm)2(CO)3(CNBu)] (dppm = Ph2PCH2PPh2)

The trinuclear clusters [Pd₃(μ-dppm)₃(CO)]²⁺ and [PtPdCo(μ-dppm)₂(CO)₃(CN^tBu)]⁺ exhibit a large and a small cavity, respectively, formed by the phenyl rings of the bridging diphosphine ligands. Their binding constants (K₁₁) with halide ions (X⁻) were obtained by UV-Vis spectroscopy. The binding ability varies as I⁻ > Br⁻ > Cl⁻, and [Pd₃(μ-dppm)₃(CO)]²⁺ > [ptPdCo(μ-dppm)₂-(CO)₃(CN^tBu)]⁺. The MO diagram for the related cluster [Pd₂Co(μ-dppm)₂(CO)₄]⁺ has been addressed theoretically in order to predict the nature of the lowest energy electronic bands. For this class of compounds, the lowest energy bands are assigned to charge transfers from the Co center to the Pd₂ centers.     

The structure of the dichromium compound Cr2(μ-OH)2(μ-3,5Cl2-form)2(η-3,5Cl2-form)2

With exposure to trace amounts of air and moisture, the Cr₂(II, II) complex Cr₂(μ-3,5Cl₂-form)₄, where 3,5Cl₂-form is [(3,5-Cl₂C₆H₃)NC(H)N(3,5-Cl₂C₆H₃)⁻], undergoes an oxidative addition reaction. Structural information from the X-ray crystal structure of the edge-sharing bioctahedral (ESBO) Cr₂(III, III) product Cr₂(μ-OH)₂(μ-3,5Cl₂-form)₂(η²-3,5Cl₂-form)₂ (1) indicates 1 has a significantly longer Cr–Cr distance [2.732(2) Å] than Cr₂(μ-3,5Cl₂-form)₄ [1.9162(10) Å], but the shortest Cr–Cr distance in an ESBO Cr₂(III, III) complex recorded to date.     

Mixed-metal butterfly acetamidediato clusters derived from a highly reactive ruthenium oxo cluster: synthesis and characterization of [(PPh3)2N][MRu3(CO)12(η-μ3-NC(μ-O)CH3)], (M = Mn or Re)

Analogy with the isolable oxo cluster [Fe₃(CO)₉(μ₃-O)]²⁻, which is structurally interesting and synthetically useful, prompted the present attempt to synthesize its ruthenium analog. Although the high reactivity of [Ru₃(CO)₉(μ₃-O)]²⁻ (I) prevented its isolation, the reaction of this species with [M(CO)₃(NCCH₃)]⁺, where M = Mn or Re, yields [PPN][MRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃]⁻. The high nucleophilicity of the oxo ligand in [Ru₃(CO)₉(μ₃-O)]²⁻ (I) appears to be responsible for the conversion of acetonitrile to an acetamidediato ligand and for the instability of I. The crystal structure of [PPN][MnRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃)]] reveals a hinged butterfly array of metal atoms in which the acetamidediato ligand bridges the two wings with μ₃-N bonding to an Mn and two Ru atoms, and μ-O bonding to an Ru atom.     

The new enneanuclear nickel carbonyl anion [Ni9(CO)16] and its relationships with the [Ni12(CO)21] and [Ni6Rh3(CO)17] clusters

The reaction of [N(PPh₃)₂]₂[Ni₆(CO)₁₂] with Cu(PPh₃)_xCl (x=1, 2), as well as the degradation of [N(PPh₃)₂]₂[H₂Ni₁₂(CO)₂₁] with PPh₃, affords the new and unstable dark orange–brown [N(PPh₃)₂]₂[Ni₉(CO)₁₆].THF salt in low yields. This salt has been characterized by a CCD X-ray diffraction determination, along with IR spectroscopy and elemental analysis. The close-packed two-layer metal core geometry of the [Ni₉(CO)₁₆]²⁻ dianion is directly related to that of the bimetallic [Ni₆Rh₃(CO)₁₇]³⁻ trianion and may be envisioned to be formally derived from the hcp three-layer geometry of [Ni₁₂(CO)₂₁]⁴⁻ by the substitution of one of the two outer [Ni₃(CO)₃(μ−CO)₃]²⁻ layers with a face-bridging carbonyl group.     

Reactions of the haloalcohols HO(CH2)nCl (n = 2, 3) with platinum(II) - alkynyl and -alkyne complexes. X-ray crystal structure of trans-[Pt(Me) {C(OCH2CH2Cl) (CH2Ph)} (PPh3)2] [BF4]

The chloro complexes trans-[Pt(Me)(Cl)(PPh₃)₂], after treatment with AgBF₄, react with 1-alkynes HC---C---R in the presence of NEt₃ to afford the corresponding acetylide derivatives trans-[Pt(Me) (C---C---R) (PPh₃)₂] (R = p-tolyl (1), Ph (2), C(CH₃)₃ (3)). These complexes, with the exception of the t-butylacetylide complex, react with the chloroalcohols HO(CH₂)_nCl (n = 2, 3) in the presence of 1 equiv. of HBF₄ to afford the alkyl(chloroalkoxy)carbene complexes trans-[Pt(Me) {C[O(CH₂)_nCl](CH₂R) } (PPh₃)₂][BF₄] (R = p-tolyl, N = 2 (4), N = 3 (5); R=Ph, N = 2 (6)). A similar reaction of the bis(acetylide) complex trans-[Pt(C---C---Ph)₂(PMe₂Ph)₂] with 2 equiv. HBF₄ and 3-chloro-1-propanol affords trans-[Pt(C---CPh) {C(OCH₂CH₂CH₂Cl)(CH₂Ph) } (PMe₂Ph)₂][BF₄] (7). T alkyl(chloroalkoxy)-carbene complex trans-[Pt(Me) {C(OCH₂CH₂Cl)(CH₂Ph) } (PPh₃)₂][BF₄] (8) is formed by reaction of trans-[Pt(Me)(Cl)(PPh₃)₂], after treatment with AgBF₄ in HOCH₂CH₂Cl, with phenylacetylene in the presence of 1 equiv. of n-BuLi. The reaction of the dimer [Pt(Cl)(μ-Cl)(PMe₂Ph)]₂ with p-tolylacetylene and 3-chloro-1-propanol yields cis-[PtCl₂{C(OCH₂CH₂CH₂Cl)(CH₂C₆H₄-p-Me}(PMe₂Ph)] (9). The X-ray molecular structure of (8) has been determined. It crystallizes in the orthorhombic system, space group Pna2₁, with a = 11.785(2), B = 29.418(4), C = 15.409(3) Å, V = 4889(1) ų and Z = 4. The carbene ligand is perpendicular to the Pt(II) coordination plane; the PtC(carbene) bond distance is 2.01(1) Å and the short C(carbene)-O bond distance of 1.30(1) Å suggests extensive electronic delocalization within the Pt---C(carbene)---O moietry.     

Ligand induced P---H bond formation and a comparison of the reactivity of two isomers of the carbonyl hydride [Pt2(μ-PBu2)2(H)(CO)(PBu2H)]CF3SO3

The Pt₂ ^(II) isomeric terminal hydrides [(CO)(H)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)]CF₃SO₃ (1a), and [(CO)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)(H)]CF₃SO₃ (1b), react rapidly with 1 atm of carbon monoxide to give the same mixture of two isomers of the Pt₂ ^(I) dicarbonyl [Pt₂(μ-PBu^t ₂)(CO)₂(PBu^t ₂H)₂]CF₃SO₃ (3-Pt); the solid state structure of the isomer bearing the carbonyl ligands pseudo-trans to the bridging phosphide was solved by X-ray diffraction. A remarkable difference was instead found between the reactivity of 1a and 1b towards carbon disulfide or isoprene. In both cases 1b reacts slowly to afford [Pt₂(μ-PBu^t ₂)(μ,η²,η²-CS₂)(PBu^t ₂H)₂]CF₃SO₃ (4-Pt), and [Pt₂(μ-PBu^t ₂)(μ,η²,η²-isoprene) (PBu^t ₂H)₂]CF₃SO₃ (6-Pt), respectively. In the same experimental conditions, 1a is totally inert. A common mechanism, proceeding through the preassociation of the incoming ligand followed by the P---H bond formation between one of the bridging P atoms and the hydride ligand, has been suggested for these reactions.     

Catalytic and electrochemical properties of new manganese(III) compounds of 2-(2′-hydroxyphenyl)-oxazoline (Hphox or HClphox). Molecular structures of [Mn(Clphox)2(MeOH)2](ClO4) and [Mn(phox)2(MeOH)2][Mn(phox)2(ClO4)2](H2O)2

New manganese(III) complexes of Hphox (2-(2′-hydroxyphenyl)-oxazoline) and HClphox (2-(5′-chloro-2′-hydroxyphenyl)-oxazoline) have been synthesised. The X-ray structures of [Mn(phox)₂(MeOH)₂][Mn(phox)₂(ClO₄)₂](H₂O)₂ and [Mn(Clphox)₂(MeOH)₂](ClO₄) show the manganese(III) ions to be octahedrally coordinated with methanol or perchlorate at the axial coordination sites. The cyclic voltammograms of the complexes, with the exception of [Mn(phox)₂(acac)] (Hacac=2,4-pentanedione), show an irreversible reduction wave of manganese(III) to manganese(II). After addition of an excess of 1-methylimidazole (1-Meim), the reduction process shifts towards lower potentials and becomes (quasi-) reversible, indicating that the presence of 1-Meim affects the catalytic efficiency of the complexes. The complexes catalyse the epoxidation of styrene by dihydrogen peroxide. The cumulative turnover numbers towards styrene oxide obtained after 15 min. vary from 16 for [Mn(Clphox)₂(MeOH)₂](ClO₄) to 26 for [Mn(phox)₂(acac)]. Ligand degradation appears to be the limiting factor for obtaining higher turnover numbers.     

Ferrocenyl-derived face-capping ligands: syntheses and molecular structures of [(FcTt)Cu]4 and [FcTt]2M (M = Fe, Co, Ni; FcTt = ferrocenyltris((methylthio)methyl)borate)

The synthesis and characterization of a ferrocenyl-derived tridentate ligand, ferrocenyltris((methylthio)methyl)borate (FcTtP⁻), and its representative metal complexes, [(FcTt)Cu]₄ and [FcTt]₂M (M = Fe, Co and Ni), are reported. The M = Fe complex exhibits spin-crossover behavior with a μ_eff = 1.19 μ_B at 25°C. The low-spin Co(II) derivative (1.88 μ_B) exhibits a characteristic axial electron paramagnetic resonance (EPR) spectrum, g_av = 2.13, A = 53 G and A_¦ = 43 G. The [FcTt]₂M complexes display reversible two-electron redox processes assigned to ligand-centered events about 200 mV negative of the ferrocene-ferrocenium couple. [(FcTt)Cu]₄ and [FcTt]₂Ni have been characterized by X-ray diffraction. X-ray data for [(FcTt)Cu]₄: monoclinic space group C2/c, with a = 24.3747(3) Å, b = 20.0857(2) Å, c = 17.2747(4) Å, β = 95.843(1)°, V = 8413.5(3) ų, and Z = 4; [FcTt]₂Ni: monoclinic space group C2/c, with a = 12.6220(3) Å, b = 11.6002(3) Å, c = 25.0125(7) Å, β = 94.067(1)°, V = 3653.1(2) ų, and Z = 4.     

Synthesis and properties of the dichloro [tetramethyl (trifluoromethyl)cyclopentadienyl]ruthenium dimer: X-ray structure of [M2(η-C5Me4CF3)2Cl2(μ-Cl)2] (M=Ru, Rh)

The reaction of RuCl₃(H₂O), with C₅Me₄CF₃J in refluxing EtOH gives [Ru₂(η⁵-C₅Me₁CF₂)₂ (μ-Cl₂] (20 in 44% yield. Dimer 2 antiferromagnetic (−2J=200 cm¹). The crystal structures of 2 (rhombohedral system, R3 space group, Z=9, R=0.0589) and [Rh₂(η⁵-C₅Me₄CF₃(₂Cl₂(μ-Cl)₂] (3) (rhombohedral system. space group, Z = 9, R = 0.0641) were solved; both complexes have dimeric structures with a trans arrangement of the η⁵-C₅Me₄CF₄ rings. Comparison of the geometry of 2 and 3 with those of the corresponding η⁵-C₅Me₅ complexes shows that lowering the ring symmetry causes significant distortion of the M₂(μ-Cl)₂ moiety. The analysis of the MCl₃ fragment conformations in 2 and 3 and in the η⁵-C₅ME₅ analogues shows that they are correlated with the M---M distances. The Cl atoms are displaced by Br on reaction of 2 with KBr in MeOH to give the diamagnetic dimer [Ru₂(η⁵-C₅Me₄CF₃)₂Br₂ (μ-Br₂] (4). Complex 2 reacts with O₂ in CH₂Cl₂ solution at ambient temperature to form a mixture of isomeric η⁶-fulvene dimers [Ru₂(η⁶-C₅Me₃CF₃ = CH₂)₂Cl₂(μ-Cl)₂] (5). Reactions of 5 with CO and allyl chloride give Ru(η⁵-C₅Me₃CF₃CH₂Cl)(CO)₂Cl (6) and Ru(η⁵-C₅Me₃CF₃CF₃CH₂Cl)(η³-C₃H₅)Cl₂ (7) respectively.     

Olefin versus sulfur coordination of benzo[b]thiophene (BT) in Cp(CO)2Re(η:η-μ2-BT)Cr(CO)3

Reactions of Cr(CO)₃(η⁶-BT), in which the Cr is π-coordinated to the benzene ring of benzo[b]thiophene (BT), with Cp′(CO)₂Re(THF), where Cp′ = η⁵-C₅H₅ or η⁵-C₅Me₅, give the products Cp′(CO)₂Re(η²:η⁶-μ₂-BT)Cr(CO)₃ in which the Cr remains coordinated to the benzene ring and Re is bound to the C(2)=C(3) double bond. An X-ray diffraction study of Cp(CO)₂Re(η²:η⁶-μ₂-BT)Cr(CO)₃ (3) provides details of the geometry. This structure contrasts with that of the Cp′(CO)₂Re(BT) complexes that exist as mixtures of isomers in which the BT is coordinated to the Re through either the double bond (2,3-η²) or the sulfur (η¹(S)). Thus, the electron-withdrawing Cr(CO)₃ group in 3 stabilizes the 2,3-η² mode of BT coordination to the Cp′(CO)₂Re fragment. Implications of these results for catalytic hydrodesulfurization of BT are discussed. Crystal data for 3: triclinic, space group

Full-size image

.     

Interactions between thiamine and large anions. Crystal structures of (H-thiamine)[Pt(SCN)4] · 3H2O and (H-thiamine)[Pt(SCN)6] · H2O

The reaction of thiamine with K₂Pt^IICl₄ and with Pt^IVCl₄ in the presence of excess NaSCN in aqueous solution gave thiamine salts, (H-thiamine)[Pt(SCN)₄] · 3H₂O (1) and (H-thiamine)[Pt(SCN)₆] · H₂O (2), respectively, structures of which have been determined by X-ray diffraction. The thiamine molecule adopts the usual F conformation in each salt. In 1, [Pt(SCN)₄]²⁻ ions act as large planar spacers in the crystal lattice and interact scarcely with thiamine, except for a hydrogen bonding with the terminal hydroxy O(5γ). Instead, water molecules form two types of host–guest-like interactions with the pyrimidine and the thiazolium moieties of a thiamine molecule, one being a C(2)–Hwaterpyrimidine bridge and the other being an N(4′)–Hwaterthiazolium bridge. In 2, despite the much larger ion size, octahedral [Pt(SCN)₆]²⁻ ions form a C(2)–Hanionpyrimidine bridge and an N(4′)–Hanionthiazolium bridge. An additional hydrogen bonding between the anion and the terminal O(5γ) of thiamine creates a hydrogen-bonded macrocyclic ring {thiaminium–[Pt(SCN)₆]²⁻}₂, a supramolecule.     

Heterobimetallic chloro bridgedcomplexes of (η:η−C10H16)-ruthenium(IV) with palladium(II), platinum(II), rhodium(III), iridium(III), copper(I) and rhodium(I)

Metathesis of [(η³:η³−C₁₀H₁₆)Ru(Cl) (μ−Cl)]₂ (1) with [R₃P) (Cl)M(μ-Cl)]₂ (M = Pd, Pt), [Me₂NCH₂C₆H₄Pd(μ-Cl)]₂ and [(OC)₂Rh(μ-Cl)]₂ affords the heterobimetallic chloro bridged complexes (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂M(PR₃)(Cl) (M = Pd, Pt), (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂PdC₆H₄CH₂NMe₂ and (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂Rh(CO)₂, respectively. Complex 1 reacts with [Cp^*M(Cl) (μ-Cl)]₂ (M = Rh, Ir), [p-cymene Ru(Cl) (μ-Cl]₂ and [(Cy₃P)Cu(μ-Cl)]₂ to give an equilibrium of the heterobimetallic complexes and of educts. The structures of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂Pd(PR₃) (Cl) (R = Et, Bu) and of one diastereoisomer of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂IrCp^*(Cl) were determined by X-ray diffraction.     

The coordination chemistry of cationic main group clusters: syntheses and structures of [Fe3(Se2)2(CO)10] and [Fe4(Se2)3(CO)12]

The reactions of the polysulfur and selenium cationic clusters S₈²⁺ and Se₈²⁺ with various iron carbonyls were investigated. Several new chalcogen containing iron carbonyl cluster cations were isolated, depending on the nature of the counteranion. In the presence of SbF₆⁻ as a counterion, the cluster [Fe₃(E₂)₂(CO)₁₀] [SbF₆]₂·SO₂ (E = S, Se) could be isolated from the reaction of E₈²⁺ and excess iron carbonyl. The cluster is a picnic-basket shaped molecule of two iron centers linked by two Se₂ groups, with the whole fragment capped by an Fe(CO)₄ group. Crystallographic data for C₁₀O₁₂Fe₃Se₄Sb₂F₁₂S (I): space group monoclinic P2₁/c, A = 11.810(9), b = 24.023(6), c = 10.853(7) Å, β = 107.15(5)°, V = 2942(3) ų, Z = 4, R = 0.0426, R_w = 0.0503. When Sb₂F₁₁⁻ is present as the counterion, or Se₄[Sb₂F₁₁]₂ is used as the cluster cation source, a different cluster can be isolated, which has the formula [Fe₄(Se₂)₃(CO)₁₂] [SbF₆]₂·3SO₂. The dication contains two Fe₂Se₂ fragments bridged by an Se₂ group. Crystallographic data for C₁₂O₁₈Fe₄Se₆Sb₂F₁₂S₃ (III): space group triclinic , b = 18.400(9), C = 10.253(4) Å, = 93.10(4), β = 103.74(3), γ = 93.98(3)°, V = 1995(1) ų, Z = 2, R = 0.0328, R_w = 0.0325. The CO stretches in the IR spectrum all show a large shift to higher wavenumbers, suggesting almost no τ backbonding from the metals. This also correlates with the observed bond distances. All the compounds are extremely sensitive to air and water, and readily lose SO₂ when removed from the solvent. Thus all the crystals were handled at −100°C. The clusters seem to be either insoluble or unstable in all solvents investigated.     

Reaction of [Pt{Fe(CO)3(NO)}2(PhCN)2] with diphenyl(2-pyridyl)phosphine selenide. Crystal structure of [(CO)3Fe(μ3-Se){Pt(CO)P(2-C5H4N)Ph2}2] and its theoretical study

The reaction between the linear trinuclear complex [Pt{Fe(CO)₃(NO)}₂(PhCN)₂] and Ph₂(2-C₅H₄N)PSe led to the isolation and characterization of the 46-electron cluster [(CO)₃Fe(μ₃-Se){Pt(CO)P(2-C₅H₄N)Ph₂}₂] (1), whose structure has been determined by X-ray diffraction methods. The cluster typology, which consists of an open triangle Pt---Fe---Pt capped by a μ₃-Se atom, is rather rare. The chemical bonding in 1 and in similar systems has been analyzed through density functional theory (DFT) and qualitative MO approaches. A strict analogy with the well understood L₂M(μ-acetylene)ML₂ systems is invoked by considering 1 as formed by the (CO)₃FeSe tetrahedral unit stabilized by sidewise interactions of the triple bond with two d¹⁰-L₂M fragments. Otherwise, the 18-electron (CO)₃FeSe monomer is unstable as an isolate molecule. This is confirmed by our DFT calculations that indicate how the well characterized dimer (CO)₃Fe(μ-Se₂)Fe(CO)₃ lies as much as, approximately, 58 kcal mol⁻¹ deeper in energy. Finally, by considering an analogy with [L₂M(μ-dichalcogen)ML₂]^{0, +2} redox systems (M=Pd, Pt), reduction of 1 to a dianion has been hypothesized and the structure of the latter has been tentatively explored by DFT calculations.     

Reactivity, variable temperature solution H NMR studies and MO calculations of dimolybdenum allenylidene complexes of the type [(η-C5H5)2Mo2(CO)4(μ,η(4e)-C=C=CR1R2)]

The reactivity, towards nucleophiles and electrophiles, of dimolybdenum allenylidene complexes of the type [Cp₂Mo₂(CO)₄(μ,η²(4e)-C=C=CR1R2)] (Cp=η⁵-C₅H₅) has been investigated. The nucleophilic attacks occur at the C_γ carbon atom, while electrophiles affec the C atom. Variable temperature solution ¹H NMR studies show a dynamic behavior of these complexes consisting of an equilibrium between two enantiomers with a symmetrical [Cp₂Mo₂(CO)₄(μ-σ,σ(2e)-C=C=CR1R2)] transition state. Extended Hückel MO calculations have been carried out on the model [Cp₂Mo₂(CO)₄(μ,η²-C=C=CH₂]. The calculated charges of the allenylidene carbon atoms suggest that the electrophilic attacks are under charge control, while the nucleophilic attacks are rather under orbital control.     

Organometallic chemistry of diphosphazanes. Rhodium(I) complexes of RN(PX2)2 (R = C6H5; X = OC6H5, OC6H4Br−p, R = CH3; X = OC6H5)

Reactions of [Rh(COD)Cl]₂ with the ligand RN(PX₂)₂ (1: R = C₆H₅; X = OC₆H₅) give mono- or disubstituted complexes of the type [Rh₂(COD)Cl₂{ν²−C₆H₅N(P(OC₆H₅)₂)₂}] or [RhCl{ν²−C₆H₅ N(P(OC₆H₅)₂)₂ }]₂ depending on the reaction conditions. Reaction of 1 with [Rh(CO)₂Cl]₂ gives the symmetric binuclear complex, [Rh(CO)Cl{μ−C₆H₅N(P(OC₆H₅)₂)₂} ₂, whereas the same reaction with 2 (R = CH₃; X = OC₆H₅) leads to the formation of an asymmetric complex of the type [Rh(CO)(μ−CO)Cl{μ−CH₃N(P(OC₆H₅)₂)₂}₂ containing both terminal and bridging CO groups. Interestingly the reaction of 3 (R = C₆H₅, X = OC₆H₄Br−p with either [Rh(COD)Cl]₂ or [Rh(CO)₂Cl]₂ leads only to the formation of the chlorine bridged binuclear complex, [RhCl{ν²−C₆H₅N(P(OC₆H₄Br−p)₂)₂}]₂. The structural elucidation of the complexes was carried out by elemental analyses, IR and ³¹P NMR spectroscopic data.     

Synthesis and crystal structure of tetranuclear copper(I) and silver(I) complexes bridged by 2-amino-1,3,4-thiadiazole (atdz): [Cu4(atdz)6](ClO4)4·2CH3OH and [Ag4(atdz)6](ClO4)4

Two novel tetracopper(I) and tetrasilver(I) complexes [Cu₄(atdz)₆](ClO₄)₄·2CH₃OH (1) and [Ag₄(atdz)₆](ClO₄)₄ (2), have been prepared using 2-amino-1,3,4-thiadiazole (atdz), and their crystal structures and properties have been determined. On each tetranuclear complex, two Cu or Ag atoms (M) are bridged by two atdz ligands to form a six-membered N₂M₂N₂ framework. The two N₂M₂N₂ frameworks are in parallel linked by another atdz ligand to provide the tetranuclear structure with a rectangular M₄ core. The four Cu or Ag atoms possess a trigonal-square geometry. The two adjacent MM separations are (3.096(1) and 3.412(1) Å) and (3.316(2) and 3.658(2) Å) for 1 and 2, respectively. On both tetranuclear complexes there are two species of hydrogen bonds between the ClO₄ ⁻ anions and the NH₂ group of atdz ligands. It is proposed that the hydrogen bonds are related to the stabilization of the tetranuclear structure during the crystallization process.     

Hetero-polynuclear complexes containing bridging diphenylphosphino-alkenes and -alkynes. The crystal structure of an Rh2{μ−ν:ν−P(Ph2) (CH2)3C≡CR}Co2 complex

The phosphinoalkenes Ph₂P(CH₂)_nCH=CH₂ (n= 1, 2, 3) and phosphinoalkynes Ph₂P(CH₂)_n C≡CR (R = H, N = 2, 3; R = CH₃, N = 1) have been prepared and reacted with the dirhodium complex (η−C₅H₅)₂Rh₂(μ−CO) (μ−η²−CF₃C₂CF₃). Six new complexes of the type (ν−C₅H₅)₂(Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃)L, where L is a P-coordinated phosphinoalkene, or phosphinoalkyne have been isolated and fully characterized; the carbonyl and phosphine ligands are predominantly trans on the Rh---Rh bond, but there is spectroscopic evidence that a small amount of the cis-isomer is formed also. Treatment of the dirhodium-phosphinoalkene complexes with (η−CH₃C₅H₄)Mn(CO)₂thf resulted in coordination of the manganese to the alkene function. The Rh₂---Mn complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂P(CH₂)₃CH=CH₂} (η−CH₃C₅H₄)Mn(CO)₂] was fully characterized. Simi treatment of the dirhodium-phosphinoalkyne complexes with Co₂(CO)₈ resulted in the coordination of Co₂(CO)₆ to the alkyne function. The Rh₂---Co₂ complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂PCH₂C≡CCH₃}Co₂(CO)₂], C₃₇H₂₅Co₂F₆O₇PRh₂, was fully characteriz spectroscopically, and the molecular structure of this complex was determined by a single crystal X-ray diffraction study. It is triclinic, space group (C_i¹, No. 2) with a = 18.454(6), B = 11.418(3), C = 10.124(3) Å, = 112.16(2), β = 102.34(3), γ = 91.62(3)°, Z = 2. Conventional R on |F| was 0.052 fo observed (I > 3σ(I)) reflections. The Rh₂ and Co₂ parts of the molecule are distinct, the carbonyl and phosphine are mutually trans on the Rh---Rh bond, and the orientations of the alkynes are parallel for Rh₂ and perpendicular for Co₂. Attempts to induce Rh₂Co₂ cluster formation were unsuccessful.