Synthesis and characterization of triphenylphosphine stabilized silver α,β-unsaturated carboxylate: Crystal structure of [Ag(O2CCHC(CH3)2)(PPh3)2]

A series of triphenylphosphine coordinated silver α,β-unsaturated carboxylates of type [Ag(O₂CR)(PPh₃)_n: n = 1, R = CH₃CHCH (2a), (CH₃)₂CCH (2b), CH₃CH₂CHCH (2c), CH₃CH₂CH₂CHCH (2d), PhCHCH (2e), CH₂CH (2f); n = 2, CH₃CHCH (3a), (CH₃)₂CCH (3b), CH₃CH₂CHCH (3c), CH₃CH₂CH₂CHCH (3d)] were prepared by reaction of relative silver carboxylates (1a-1f) with triphenylphosphine in chloroform. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C NMR, ³¹P NMR and IR spectroscopy. Thermal stability of the complexes has been determined by TG analysis. The molecular structure of [Ag((O₂CCHC(CH₃)₂))(PPh₃)₂] (3b) shows that the senecioato ligand is chelated with silver atom and generate, a distorted tetrahedron.     

Gas-phase molecular structures of substituted 1,3-bisketenes: A challenge for theory and experiment

Molecular structures of dimethylbis(trimethylsilylketyl)silane (Me₂Si[C(SiMe₃)CO]₂), dimethylbis(trimethylgermylketyl)silane (Me₂Si[C(GeMe₃)CO]₂), and dimethylbis(trimethylstannylketyl)germane (Me₂Ge[C(SnMe₃)CO]₂) have been studied in the gas phase by electron diffraction accompanied by high level ab initio and DFT calculations. Extensive theoretical conformational analyses of the molecules in the vapour predicted a possibility of existence of two types of conformers with small energy differences. The first type had gauche-gauche arrangements of the ketenyl groups in the central C(CO)XC(CO) fragments directed away from each other. The second type had nearly syn-gauche arrangements of the ketenyl groups. In addition, the energy differences were found to depend on the level of computations used. The experimental analysis, in turn, was unable to distinguish between different conformers due to the large number of similar overlapping distances. The experimental data were fitted by an averaged single-conformer model, which nevertheless allowed reliable determination of bonds and bonded angles in the molecules. Main experimental (r_h1) structural parameters for Me₂Si[C(SiMe₃)CO]₂, Me₂Si[C(GeMe₃)CO]₂, and Me₂Ge[C(SnMe₃)CO]₂, i.e. Me₂X[C(YMe₃)CO]₂ (X,Y = Si, Ge, Sn), are (X-C)_mean 187.7(1) pm, 194.6(2) pm, 216.1(3) pm; (Y-C)_mean, 187.7(1) pm, 188.8(8) pm, 194.6(4) pm; (CC)_mean, 135.3(5) pm, 131.6(5) pm, 131.5(13) pm; (CO)_mean, 117.0(7) pm, 117.4(7) pm, 119.0(11) pm; (C-H)_mean, 110.6(7) pm, 110.0(4) pm, 109.1(13) pm; (X(Y)-CC)_mean, 114.4(2)°, 115.6(1)°, 115.6(2)°; (C-X(Y)-C_Me)_mean, 108.3(3)°, 108.4(3)°, 108.9(13)°; C(2)-C(1)-Y(4)-C(10), −19(6)°, 5(4)°, −9(10)°; C(7)-C(6)-Y(9)-C(38),−22(7)°, −32(3)°, −9(10)°; C(2)-C(1)-X(5)-C(6), 128(4)°, 142(1)°, 108(9)°; C(7)-C(6)-X(5)-C(1), 92(6)°, 115(2)°, 108(9)°, respectively.     

Organometallic π-tweezers incorporating pyrazine- and pyridine-based bridging units

Pyrazine- and pyridine-based π-conjugated σ-donor molecules, such as 4,4′-bipyridine, 1,2-di(4-pyridyl)ethylene, 3,5-dipyridyl-1,2,4-triazole, N,N′-bis(4-pyridylmethylidene)benzene-1,4-diamine, 2,5-di(pyridylmethylidene)cyclopentanone, 2,6-di(4-pyridylmethylidene)cyclohexanone (LL, 2a-2g) can successfully be used to span heterobimetallic π-tweezer units of the type [{[Ti](μ-σ,π-CCSiMe₃)₂}M]⁺ ([Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; M = Cu, Ag). The thus accessible di-cationic species [{[Ti](μ-σ,π-CCSiMe₃)₂}MLLM{(Me₃SiCC-μ-σ,π)₂[Ti]}]²⁺ (4), which are formed via the formation of [{[Ti](μ-σ,π-CCSiMe₃)₂}MLL]⁺ (3) complexes, can be isolated in yields between 66% and 99%.However, when C₅H₄NCHCHC₆H₄CHCHNC₅H₄ (5a) and C₅H₄NCHNC₆H₄CHCHNC₅H₄ (5b), respectively, are reacted with {[Ti](μ-σ,π-CCSiMe₃)₂}AgBF₄(1c) in a 1:1 molar ratio, then the silver(I) ion is released from the organometallic π-tweezer 1c and coordination polymers [AgBF₄ · 5a]_n (6a) and [AgBF₄ · 5b]_n (6b) along with [Ti](CCSiMe₃)₂ (7) are formed in quantitative yield.     

A new cumulene diiron complex related to the active site of Fe-only hydrogenases and its phosphine substituted derivatives: synthesis, electrochemistry and structural characterization

A new cumulene diiron complex related to the Fe-only hydrogenase active site [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₆] (1) was obtained by treatment of (μ-LiS)₂Fe₂(CO)₆ with excess 1,4-dichloro-2-butyne. By controllable CO displacement of 1 with PPh₃ and bis(diphenylphosphino)methane (dppm), mono- and di-substituted complexes, namely [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅L] (2: L = PPh₃; 3: L = dppm) and [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄L₂] (4: L = PPh₃; 5: L = dppm) could be prepared in moderate yields. Treatment of 1 with bis(diphenylphosphino)ethane (dppe) afforded a double butterfly complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅]₂(μ-dppe) (7). With dppm in refluxing toluene, a dppm-bridged complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄(μ-dppm)] (6) was obtained. These model complexes were characterized by IR, ¹H, ³¹P NMR spectra and the molecular structures of 1, 2 and 5-7 were determined by single crystal X-ray analyses. The electrochemistry of 1-3 was studied and the electrocatalytic property of 1 was investigated for proton reduction in the presence of HOAc.     

Reactivity of alkynyl Pd(II) azido complexes toward organic isocyanides, isothiocyanates, and nitriles

Alkynyl Pd(II) azido complexes of the type [Pd(N₃)(CCR)L₂] (1-3) were obtained by reactions of aqueous NaN₃ with [Pd(Cl)(CCR)L₂] (R = Ph or C(O)OMe). Treating compounds 1-3 with organic isocyanides (R-NC) afforded novel complexes, trans-[Pd(CCPh)(NCNR)(PMe₃)₂] (R = 2,6-Me₂C₆H₃ (4) or 2,6-Et₂C₆H₃ (5)) and trans-[Pd(CCR)(CN₄-t-Bu)L₂] (6: L = PMe₃, R = Ph; 7: L = PEt₃, R = C(O)OMe; 8: L = PMe₃, R = C(O)OMe), which contain either a carbodiimido or a C-coordinated tetrazolato group. Reactions of compounds 1 and 2 with R-NCS (R = 2,6-Me₂C₆H₃ or CH₂CH₃) and 1,4-phenylene diisothiocyanate (C₆H₄(NCS)₂) smoothly proceeded to give tetrazole-thiolato complexes, trans-[Pd(CCPh)(SCN₄-R)L₂] (L = PMe₃, R = Et (9) or 2,6-Me₂C₆H₃ (10); L = PEt₃, R = 2,6-Me₂C₆H₃ (11)), and a phenylene-bridged dinuclear Pd(II) tetrazole-thiolato complex, [(PEt₃)₂(CCPh)Pd(SCN₄-(μ-C₆H₄)-SCN₄)Pd(CCPh)(PEt₃)₂] (12), respectively. Complexes 9-12 contain the Pd-S bond that is formed by the dipolar cycloaddition of the organic isothiocyanate to the Pd-azido bond. In contrast, the corresponding reactions of compounds 1and 2 with C₆F₅CN and Me₃SiCN (organic nitriles, R-CN) gave an N-coordinated Pd(II)-tetrazolato compound {trans-[Pd(CCPh)(N₄C-C₆F₅)(PMe₃)₂] (13)} and a mixture of Pd(II)-cyano complexes {trans-[Pd(CCPh)(CN)(PEt₃)₂] (14) and [Pd(CN)₂(PEt₃)₂] (15)}, respectively. Bis(phosphine) bis(cyano) complexes of Pd and Ni, [M(CN)₂L₂] (L = PEt₃, PMe₃; L₂ = DEPE), could be obtained independently by the reactions of [M(N₃)₂L₂] with excess Me₃SiCN in organic solvents.     

H2O2 and (.)NO scavenging by Mycobacterium leprae truncated hemoglobin O

Kinetics of ferric Mycobacterium leprae truncated hemoglobin O (trHbOFe(III)) oxidation by H₂O₂ and of trHbOFe(IV)O reduction by NO and NO₂⁻ are reported. The value of the second-order rate constant for H₂O₂-mediated oxidation of trHbOFe(III) is 2.4 × 10³ M⁻¹ s⁻¹. The value of the second-order rate constant for NO-mediated reduction of trHbOFe(IV)O is 7.8 × 10⁶ M⁻¹ s⁻¹. The value of the first-order rate constant for trHbOFe(III)ONO decay to the resting form trHbOFe(III) is 2.1 × 10¹ s⁻¹. The value of the second-order rate constant for NO₂⁻-mediated reduction of trHbOFe(IV)O is 3.1 × 10³ M⁻¹ s⁻¹. As a whole, trHbOFe(IV)O, generated upon reaction with H₂O₂, catalyzes NO reduction to NO₂⁻. In turn, NO and NO₂⁻ act as antioxidants of trHbOFe(IV)O, which could be responsible for the oxidative damage of the mycobacterium. Therefore, Mycobacterium leprae trHbO could be involved in both H₂O₂ and NO scavenging, protecting from nitrosative and oxidative stress, and sustaining mycobacterial respiration.     

Ferrocenyl-substituted allenylidene complexes of chromium, molybdenum and tungsten: Synthesis, structure and reactivity

Bis(ferrocenyl)-substituted allenylidene complexes, [(CO)₅MCCCFc₂] (1a-c, Fc = (C₅H₄)Fe(C₅H₅), M = Cr (a), Mo (b), W (c)) were obtained by sequential reaction of Fc₂CO with Me₃Si-CCH, KF/MeOH, n-BuLi, and [(CO)₅M(THF)]. For the synthesis of related mono(ferrocenyl)allenylidene chromium complexes, [(CO)₅CrCCC(Fc)R] (R = Ph, NMe₂), three different routes were developed: (a) reaction of the deprotonated propargylic alcohol HCCC(Fc)(Ph)OH with [(CO)₅Cr(THF)] followed by desoxygenation with Cl₂CO, (b) Lewis acid induced alcohol elimination from alkenyl(alkoxy)carbene complexes, [(CO)₅CrC(OR)CHC(NMe₂)Fc], and (c) replacement of OMe in [(CO)₅CrCCC(OMe)NMe₂] by Fc. Complex 1a was also formed when the mono(ferrocenyl)allenylidene complex [(CO)₅CrCCC(Fc)NMe₂] was treated first with Li[Fc] and the resulting adduct then with SiO₂. The replacement route (c) was also applied to the synthesis of an allenylidene complex (7a) with a CC spacer in between the ferrocenyl unit and C_γ of the allenylidene ligand, [(CO)₅CrCCC(NMe₂)-CCFc]. The related complex containing a CHCH spacer (9a) was prepared by condensation of [(CO)₅CrCCC(Me)NMe₂] with formylferrocene in the presence of NEt₃. The bis(ferrocenyl)-substituted allenylidene complexes 1a-c added HNMe₂ across the C_α-C_β bond to give alkenyl(dimethylamino)carbene complexes and reacted with diethylaminopropyne by regioselective insertion of the CC bond into the C_β-C_γ bond to afford alkenyl(diethylamino)allenylidene complexes, [(CO)₅MCCC(NEt₂)CMeCFc₂]. The structures of 5a, 7a, and 9a were established by X-ray diffraction studies.     

Oxidovanadium(IV) complexes containing ligands derived from dithiocarbazates - Models for the interaction of VO with thiofunctional ligands

The tetragonal-pyramidal VO²⁺ complexes [VO{(RSC-S)N-NX}₂] (1-6) were synthesised by the reactions of VO(OCHMe₂)₃ with the dithiocarbazate ligands RSC(S)-NH-NX, where X = cyclo-pentyl, cyclo-hexyl or 4-Me₂N-C₆H₄-CH, and R = CH₃ or CH₂C₆H₅. The compounds were characterised by elemental analysis, IR- and mass spectrometries, and in cases of compounds 1, 3, 4 and 5, by X-ray diffraction. The chiral compound 4 (X = cyclo-hexyl, R = CH₂C₆H₅) crystallises in the C configuration. In compound 5, the VO moiety is disordered (83.3:16.7%) with respect to the plane spanned by the four equatorial ligand functions.     

Alkoxy-substituted group 6 allenylidene complexes - Synthesis and properties

Bis(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR′)OR], as well as mono(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR′)Ph], of chromium and tungsten are accessible from propynones [HCCC(O)Ph] or propynoic acid esters [HCCC(O)OR; R = Et, (−)-menthyl, endo-bornyl] by the following reaction sequence: (a) deprotonation of the alkynes, (b) reaction with [(CO)₅M-THF] (M = Cr, W), and (c) alkylation of the resulting alkynyl metallate, [(CO)₅MCCC(O)R], with Meerwein salts. Vinylidene complexes, [(CO)₅MCC(R′)C(O)OR], are formed as a by-product by C_β-alkylation of the alkynyl metallate. Dimethylamine displaces one alkoxy substituent of the bis(alkoxy)allenylidene complexes to give dimethylamino(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR)NMe₂]. The analogous reaction of dimethylamine with a mono(alkoxy)-substituted allenylidene complex affords the aminoallenylidene complex [(CO)₅CrCCC(NMe₂)Ph]. When the amine is used in large excess, the α,β-unsaturated aminocarbene complex [(CO)₅CrC(NMe₂)C(H)C(NMe₂)Ph] is additionally formed by addition of the amine across the C_αC_β-bond of the allenylidene ligand. The reaction of [(CO)₅MCCC(OEt)₂] with dimethyl ethylenediamine offers access to bis(amino)allenylidene complexes, in which C_γ is part of a five-membered heterocycle. Photolysis of bis(alkoxy)allenylidene complexes in the presence of triphenylphosphine yields tetracarbonyl- and tricarbonyl{bis(phosphine)}allenylidene complexes. Diethylaminopropyne inserts into the C_βC_γ bond of [(CO)₅MCCC(OEt)OMethyl] to give alkenylallenylidene complexes. Subsequent acid-catalyzed intramolecular cyclization affords a pyranylidene complex.     

Preparation of carbon black from rice husk by hydrolysis, carbonization and pyrolysis

Carbon black is a form of amorphous carbon that is produced by incomplete combustion of petroleum- or some plant-derived materials and has a number of industrial uses. A process consisting of hydrolysis, carbonization and pyrolysis of rice husk was developed. Under optimal hydrolysis conditions (72 wt.% sulfuric acid, 50 °C, 10 min), a hydrolysis ratio of 52.72% was achieved. After carbonization of the hydrolysis solution by water bath, the solid carbon was further pyrolyzed. As the pyrolysis temperature was increased from 400 to 800 °C, the carbon content increased from 83.41% to 94.66%, the number of O-H, C-H, CO, and CC surface functional groups decreased, and based on Brunauer-Emmett-Teller (BET) results, the specific surface area and pore volume of carbon black increased from 389 to 1034 m²/g and from 0.258 to 0.487 cm³/g, respectively. X-ray diffraction pattern (XRD) and Raman spectroscopy analyses of samples pyrolyzed at 400-800 °C showed a localized graphitic structure. It is possible that the hydrolysis/carbonization/pyrolysis process developed in this study could also be applicable to the preparation of carbon black from other types of biomass.     

Modification of aminoallenylidene complexes of chromium via exchange of the C3-bound amino group

The aminoallenylidene(pentacarbonyl)chromium complexes [(CO)₅CrCCC(NR¹R²)Ph] (1a-c) react with dimethylamine by addition of the amine to the C1C2 bond of the allenylidene ligand to give alkenyl(amino)carbene complexes [(CO)₅CrC(NMe₂)CHC(NR¹R²)Ph] (2a-c) (R¹ = Me: R² = Me (a), Ph (b); R¹ = Et: R² = Ph (c)). In contrast, addition of a large excess (usually 20 equivalents) of ammonia or primary amines, H₂NR, to solutions of [(CO)₅CrCCC(NMe₂)Ph] (1a) affords the aminoallenylidene complexes [(CO)₅CrCCC(NHR)Ph] (1d-w) in which the dimethylamino group is replaced by NH₂ or NHR, respectively. In addition to simple amines such as methylamine, butylamine, and aniline, amines carrying a functional group (allylamine, propargylamine) and amino acid esters as well as amino terpenes and amino sugars can be used to displace the NMe₂ substituent. Usually the Z isomer (with respect to the partial C3-N double bond) is formed exclusively. Products derived from addition of H₂NR to the C1C2 bond of 1a are not observed. The amino group in 1d-w is rapidly deprotonated by excess of amine to form iminium alkynyl chromates [1d-w]⁻, thus protecting 1d-w from addition of free amine to either C3 or across the C1C2 bond. The iminium alkynyl chromates are readily reprotonated by acids or by chromatography on wet SiO₂ to reform 1d-w.     

Nickel(II) α-diimine catalysts for the atom transfer radical polymerization of styrene

The synthesis and evaluation of ^Cy[N,N]NiX₂ complexes (where ^Cy[N,N] = C₆H₁₁NCHCHNC₆H₁₁; X = Cl, Br) as catalysts for atom transfer radical polymerization are reported. ^Cy[N,N]NiCl₂ offers poor control over the polymerization of MMA and styrene due to catalyst insolubility. The more soluble bromo catalyst ^Cy[N,N]NiBr₂, promotes rapid styrene polymerization, but with inefficient initiation, affording higher than expected molecular weights based on [M]_o/[I]_o ratios. Utilizing 1-PEBr results in efficient initiation to give low polydispersities (M_w/M_n ∼ 1.2) and polystyrene molecular weights that correlate with monomer:initiator ratios.     

Synthesis and reactivity of iron carbonyl clusters containing alkynethiolate ligands

The new cluster Li[Fe₃(μ₃,η¹-SCCFc)(CO)₉] reacts with ClAuPPh₃ to afford compound [Fe₃Au(μ₄,η²-CCFc)(CO)₉(PPh₃)], which exhibits an isomeric equilibrium in solution with the cluster [Fe₃Au(μ₃,η²-CCFc)(CO)₉(PPh₃)].The rupture of C-S bonds in the thioethers Me₃SiCCSCCR (R = Fc, SiⁱPr₃) in the presence of Fe₃(CO)₁₂, yields to the clusters [Fe₃(μ-SCCSiⁱPr₃)(μ-CCSiMe₃)(CO)₉] and [Fe₃(μ,η²-(SiⁱPr₃)CCCCSiMe₃)(μ₃-S)(CO)₉] together with the unexpected compounds [Fe₂(μ-SCC(H)R)(CO)₆] (R = SiMe₃, SiⁱPr₃).Additionally, the dinuclear derivatives [Fe₂(μ-SCCR)(μ-CCR′)(CO)₆] (R = Fc, R′ = SiMe₃; R = SiMe₃, R′ = Fc; R = SiMe₃; R′ = SiⁱPr₃) have also been obtained. These compounds have been spectroscopically characterized and the crystal structure of some of them has been solved.     

Peroxynitrite detoxification by ferryl Mycobacterium leprae truncated hemoglobin O

During infection, Mycobacterium leprae is faced with the host macrophagic environment limiting the growth of the bacilli. However, (pseudo-)enzymatic detoxification systems, including truncated hemoglobin O (Ml-trHbO), could allow this mycobacterium to persist in vivo. Here, kinetics of peroxynitrite (ONOOH/ONOO⁻) detoxification by ferryl Ml-trHbO (Ml-trHbOFe(IV)O), obtained by treatment with H₂O₂, is reported. Values of the second-order rate constant for peroxynitrite detoxification by Ml-trHbOFe(IV)O (i.e., of Ml-trHbOFe(III) formation; k_on), at pH 7.2 and 22.0 °C, are 1.5 × 10⁴ M⁻¹ s⁻¹, and 2.2 × 10⁴ M⁻¹ s⁻¹, in the absence of and presence of physiological levels of CO₂ (∼1.2 × 10⁻³ M), respectively. Values of k_on increase on decreasing pH with a pK_a value of 6.7, this suggests that ONOOH reacts preferentially with Ml-trHbOFe(IV)O. In turn, peroxynitrite acts as an antioxidant of Ml-trHbOFe(IV)O, which could be responsible for the oxidative damage of the mycobacterium. As a whole, Ml-trHbO can undertake within the same cycle H₂O₂ and peroxynitrite detoxification.     

Layered (2-D) structure of [Ru2(O2CMe)4]2[Ni(CN)4] determined via Rietveld refinement of synchrotron powder diffraction data

Reaction of [Ru₂(O₂CMe)₄]Cl and K₂[Ni(CN)₄] forms [Ru₂(O₂CMe)₄]₂[Ni(CN)₄] with the targeted layered structure possessing Ru-NCNi linkages, albeit strained, with Ru-NC and Ni-CN angles in the range of 147-167°. The magnetic properties of [Ru₂(O₂CMe)₄]₂[Ni(CN)₄] can be fit to a zero-field splitting model with D/k_B = 95 K (66 cm⁻¹).     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of molybdenum Me2Si[CHMo(NAr)(ORF3)2]2 and PhVinSi[CHMo(NAr)(ORF3)2]2

Bimetallic alkylidene complexes of molybdenum (R_F3O)₂(ArN)MoCH-SiMe₂-CHMo(NAr)(OR_F3)₂ (1) and (R_F3O)₂(ArN)MoCH-SiPhVin-CHMo(NAr)(OR_F3)₂ (2) (Ar = 2,6-C₆H₃; R_F3 = CMe₂CF₃) have been prepared by the reactions of vinyl silicon reagents Me₂Si(CHCH₂)₂ and PhSi(CHCH₂)₃ with known alkylidene compound PhMe₂C-CHMo(NAr)(OR_F3)₂. Complexes 1 and 2 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1 and 2 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and predominant cis-units content in the case of 2.     

Palladium(II) amido complexes with an unsymmetrical PNP′ pincer-type coordination and a new (E,E)-tetradentate diphosphinoazine coordination mode

Cationic palladium(II) complexes [PdCl{PR₂CH₂C(Bu^t)NNC(Bu^t)CH₂PR₂}]Cl, where R = isopropyl, cyclohexyl or tert-butyl, were synthesized by the reactions of the corresponding diphosphinoazines with bis(acetonitrile)palladium(II) dichloride. When bis(benzonitrile)palladium(II) dichloride was used instead, in the molar ratio of 2:1 to the diphosphinoazine, a new complex was isolated with the isopropyl ligand showing a previously unknown (E,E) tetradentate coordination mode. Crystal and molecular structure was determined by X-ray diffraction. The solid complex was a racemate of two axially chiral enantiomers and the chirality was preserved in solution. Reactions of the cationic complexes with triethylamine gave complexes [PdCl{PR₂CHC(Bu^t)NNC(Bu^t)CH₂PR₂}], containing deprotonated diphosphinoazines in ene-hydrazone unsymmetrical pincer-like configuration. The complexes represent several of the still rare examples of Pd(II) amido bis(phosphine) complexes with a chlorine atom covalently bonded trans to the amide nitrogen.