Biodegradable foam plastics based on castor oil

In this work, a simple but effective approach was proposed for preparing biodegradable plastic foams with a high content of castor oil. First of all, castor oil reacted with maleic anhydride to produce maleated castor oil (MACO) without the aid of any catalyst. Then plastic foams were synthesized through free radical initiated copolymerization between MACO and diluent monomer styrene. With changes in MACO/St ratio and species of curing initiator, mechanical properties of MACO foams can be easily adjusted. In this way, biofoams with comparable compressive stress at 25% strain as commercial polyurethane (PU) foams were prepared, while the content of castor oil can be as high as 61 wt %. The soil burial tests further proved that the castor oil based foams kept the biodegradability of renewable resources despite the fact that some petrol-based components were introduced.     

Design and development of low cost polyurethane biopolymer based on castor oil and glycerol for biomedical applications

In the current study, we present the synthesis of novel low cost bio‐polyurethane compositions with variable mechanical properties based on castor oil and glycerol for biomedical applications. A detailed investigation of the physicochemical properties of the polymer was carried out by using mechanical testing, ATR‐FTIR, and X‐ray photoelectron spectroscopy (XPS). Polymers were also tested in short term in‐vitro cell culture with human mesenchymal stem cells to evaluate their biocompatibility for potential applications as biomaterial. FTIR analysis confirmed the synthesis of castor oil and glycerol based PU polymers. FTIR also showed that the addition of glycerol as co‐polyol increases crosslinking within the polymer backbone hence enhancing the bulk mechanical properties of the polymer. XPS data showed that glycerol incorporation leads to an enrichment of oxidized organic species on the surface of the polymers. Preliminary investigation into in vitro biocompatibility showed that serum protein adsorption can be controlled by varying the glycerol content with polymer backbone. An alamar blue assay looking at the metabolic activity of the cells indicated that castor oil based PU and its variants containing glycerol are non‐toxic to the cells. This study opens an avenue for using low cost bio‐polyurethane based on castor oil and glycerol for biomedical applications.     

Synthesis of aspartame precursor: alpha-L-aspartyl-L-phenylalanine methyl ester in ethyl acetate using thermolysin entrapped in polyurethane

Cross-linked polyurethane (PU) was prepared for entrapping thermolysin. Using the immobilized thermolysin (IT), Z-L-aspartic acid (ZA) was reacted with -Lphenylalanine methyl ester (L-PM) in water-saturated ethyl acetate to give only alpha-Z-L-aspartylL-phenylalanine methyl ester (alpha-ZAPM). Ninety-four percent conversion of alpha-ZAPM was obtained for 30 h of reaction at 40 degrees C when 46 mg of enzyme was entrapped. PU support prepared from polypropylene glycol (#2000) showed better properties than from polypropylene (#1000) and polyethylene (#1000). Addition of polyol could increase the gel fraction of PU. The IT PU-ll-G-3, prepared from 1/2 mole ratio of PPG (#2000)/glycerin, gave the highest gel fraction and best swelling, and 89.0% of residual activity was obtained after four times of reuse (72 h). The stability of immobilized thermolysin was good; the activity loss resulting from degradatin and leak of enzyme in each time of reuse were found only about 2%. The kinetics of immobilized thermolysin-catalyzed condensation reaction of ZA with L-PM in water-saturated ethyl acetate was found to be first order in L-PM and the Lineweaver-Burk plot of 1/V against 1/[ZA] yields a straight line, showing that the reaction involves consecutive reactions of ZA and L-PM with the immobilized enzyme and with the ZA-immobilized enzyme complex, with the second reaction being the rate determining step.     

Potential of silver nanoparticle-coated polyurethane foam as an antibacterial water filter

Silver nanoparticles can be coated on common polyurethane (PU) foams by overnight exposure of the foams to nanoparticle solutions. Repeated washing and air-drying yields uniformly coated PU foam, which can be used as a drinking water filter where bacterial contamination of the surface water is a health risk. Nanoparticles are stable on the foam and are not washed away by water. Morphology of the foam was retained after coating. The nanoparticle binding is due to its interaction with the nitrogen atom of the PU. Online tests were conducted with a prototypical water filter. At a flow rate of 0.5 L/min, in which contact time was of the order of a second, the output count of Escherichia coli was nil when the input water had a bacterial load of 10(5) colony-forming units (CFU) per mL. Combined with the low cost and effectiveness in its applications, the technology may have large implications to developing countries.     

New hybrid latexes from a soybean oil-based waterborne polyurethane and acrylics via emulsion polymerization

A series of new waterborne polyurethane (PU)/acrylic hybrid latexes have been successfully synthesized by the emulsion polymerization of acrylic monomers (butyl acrylate and methyl methacrylate) in the presence of a soybean oil-based waterborne PU dispersion using potassium persulfate as an initiator. The waterborne PU dispersion has been synthesized by a polyaddition reaction of toluene 2,4-diisocyanate and a soybean oil-based polyol (SOL). The resulting hybrid latexes, containing 15-60 wt % SOL as a renewable resource, are very stable and exhibit uniform particle sizes of 125 +/- 20 nm as determined by transmittance electronic microscopy. The structure, thermal, and mechanical properties of the resulting hybrid latex films have been investigated by Fourier transform infrared spectroscopy, solid state 13C NMR spectroscopy, dynamic mechanical analysis, extraction, and mechanical testing. Grafting copolymerization of the acrylic monomers onto the PU network occurs during the emulsion polymerization, leading to a significant increase in the thermal and mechanical properties of the resulting hybrid latexes. This work provides a new way of utilizing renewable resources to prepare environmentally friendly hybrid latexes with high performance for coating applications.     

Removal of nitrate from water by foam-immobilizedPhormidium laminosum in batch and continuous-flow bioreactors

Cells of the non-N₂-fixing cyanobacteriumPhormidium laminosum were immobilized in polyurethane (PU) foams either by absorption or by entrapment in the PU prepolymer followed by polymerisation and by adsorption onto polyvinyl (PV) foams. Although entrapment caused toxicity problems which lead to rapid death of the immobilized cells, they were immobilized successfully by adsorption onto PU or PV foams and maintained their photosynthetic electron transport activities (PS I, II, I + II) for at least 7 weeks. Changes in the morphology resulting from immobilization, as revealed by scanning electron microscopy (SEM) and low temperature-SEM, were investigated. Batch cultures and a continuous-flow packed bed photobioreactor were used to study nitrate removal from water. The effects of light intensity and CO₂ concentration on bioreactor performance were studied with respect to the nitrate uptake efficiency of the system. It was concluded thatP. laminosum immobilized on polymer foams is of potential value for biological nitrate removal in a continuous-flow system. author for correspondence     

Production and characterization of biopolyols and polyurethane foams from crude glycerol based liquefaction of soybean straw

The feasibility of using crude glycerol to liquefy soybean straw for the production of biopolyols and polyurethane (PU) foams was investigated in this study. Liquefaction conditions of 240 °C, >180 min, 3% sulfuric acid loading, and 10-15% biomass loading were preferred for the production of biopolyols with promising material properties. Biopolyols produced under preferential conditions showed hydroxyl numbers from 440 to 540 mg KOH/g, acid numbers below 5 mg KOH/g, and viscosities from 16 to 45 Pa.s. PU foams produced under preferential conditions showed densities from 0.033 to 0.037 g/cm³ and compressive strength from 148 to 227 kPa. These results suggest that crude glycerol can be used as an alternative solvent for the liquefaction of lignocellulosic biomass such as soybean straw for the production of biopolyols and PU foams. The produced biopolyols and PU foams showed material properties comparable to their analogs from petroleum solvent based liquefaction processes.     

Sequential interpenetrating polymer networks produced from vegetable oil based polyurethane and poly(methyl methacrylate)

Sequential interpenetrating polymer networks (IPNs) were prepared using polyurethane produced from a canola oil based polyol with primary terminal functional groups and poly(methyl methacrylate) (PMMA). The properties of the material were studied and compared to the IPNs made from commercial castor oil using dynamic mechanical analysis, differential scanning calorimetry, as well as tensile measurements. The morphology of the IPNs was investigated using scanning electron microscopy and transmission electron microscopy. The chemical diversity of the starting materials allowed the evaluation of the effects of dangling chains and graftings on the properties of the IPNs. The polymerization process of canola oil based IPNs was accelerated because of the utilization of polyol with primary functional groups, which efficiently lessened the effect of dangling chains and yielded a higher degree of phase mixing. The mechanical properties of canola oil based IPNs containing more than 75 wt % PMMA were comparable to the corresponding castor oil based IPNs; both were superior to those of the constituent polymers due to the finely divided rubber and plastic combination structures in these IPNs. However, when PMMA content was less than 65 wt %, canola oil based IPNs exhibited a typical mechanical behavior of rigid plastics, whereas castor oil based IPNs showed a typical mechanical behavior of soft rubber. It is proposed that these new IPN materials with high performance prepared from alternative renewable resources can prove to be valuable substitutes for existing materials in various applications.     

Characterization of the polyurethanolytic activity of two Alicycliphilus sp. strains able to degrade polyurethane and N-methylpyrrolidone

Two bacterial strains (BQ1 and BQ8) were isolated from decomposed soft foam. These were selected for their capacity to grow in a minimal medium (MM) supplemented with a commercial surface-coating polyurethane (PU) (Hydroform) as the carbon source (MM-PUh). Both bacterial strains were identified as Alicycliphilus sp. by comparative 16S rRNA gene sequence analysis. Growth in MM-PUh showed hyperbolic behavior, with BQ1 producing higher maximum growth (17.8 +/- 0.6 mg.ml(-1)) than BQ8 (14.0 +/- 0.6 mg.ml(-1)) after 100 h of culture. Nuclear magnetic resonance, Fourier transform infrared (IR) spectroscopy, and gas chromatography-mass spectrometry analyses of Hydroform showed that it was a polyester PU type which also contained N-methylpyrrolidone (NMP) as an additive. Alicycliphilus sp. utilizes NMP during the first stage of growth and was able to use it as the sole carbon and nitrogen source, with calculated K(s) values of about 8 mg.ml(-1). Enzymatic activities related to PU degradation (esterase, protease, and urease activities) were tested by using differential media and activity assays in cell-free supernatants of bacterial cultures in MM-PUh. Induction of esterase activity in inoculated MM-PUh, but not that of protease or urease activities, was observed at 12 h of culture. Esterase activity reached its maximum at 18 h and was maintained at 50% of its maximal activity until the end of the analysis (120 h). The capacity of Alicycliphilus sp. to degrade PU was demonstrated by changes in the PU IR spectrum and by the numerous holes produced in solid PU observed by scanning electron microscopy after bacterial culture. Changes in the PU IR spectra indicate that an esterase activity is involved in PU degradation.     

Physical properties of canola oil based polyurethane networks

A new generation polyol (generation-II) with significantly higher triol content and higher hydroxyl value was synthesized from canola oil by introducing a mild solvent (ethyl acetate) and a more efficient reductive reagent (zinc) to the previous synthetic procedure (Narine, S. S.; Yue, J.; Kong, X. J. Am. Oil Chem. Soc. 2007, 84, 173-179). Polyurethane (PUR) elastomers were prepared by reacting this type of polyol with aliphatic diisocyanates. The physical and thermal properties of the PUR elastomers were studied using dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) and compared to the elastomers made from the old generation polyol (generation-I). The concentration of elastically active network chains (nue) of the polymer networks was calculated based on rubber elasticity theory. Larger nue and narrower distribution of nue was observed in the case of the PURs prepared from the generation-II polyol. The relatively faster relaxation at higher temperature for this type of PUR elastomer, suggests a tighter cross-linked network structure by reducing the dangling chains effect. With the same OH/NCO molar ratio, the PURs prepared from the generation-II polyol showed higher glass transition temperatures (Tg), higher Young's modulus and tensile strength, and longer elongation at break.     

Use of microorganism-immobilized polyurethane foams to absorb and degrade oil on water surface

Highly oil-absorbent polyurethane foam (PUF) materials were obtained by polymerizing polyether polyol mixture and carbodiimide-modified d-methyl diisocyanate in a weight ratio of 10:2. The foam materials were prepared to contain inorganic nutrients (slow-release fertilizer; SRF) and oil-degrading yeast cells, Yarrowia lipolytica 180, to be applied for removal of oil films on surface waters through absorption and biodegradation after oil spills. PUFs absorbed 7–9 times their own weight of Arabian light crude oil and the oil absorbency appeared to improve as the ratio of surface area to foam weight increased. PUFs showed excellent floatability which was maintained for more than 6 months in sea water, and less than 5% of the absorbed oil was released when the foams were left on water for more than 10 days. For immobilization of yeast cells into PUFs, various immobilization techniques were tested to compare their oil degrading ability and the maintenance thereof. All immobilized cells showed oil degrading abilities as good as those of free cells immediately after the preparation of PUFs, however, the activity of chitin-immobilized cells remained at a high level for the longest period of preservation. The high efficiency of oil absorption and oil degradation by PUF-immobilized yeast cells suggested that PUF-immobilized cells have a high potential as a bioremediation technique for the treatment of oil films on surface waters. Received: 27 September 1999 / Received revision: 6 March 2000 / Accepted: 17 March 2000     

Using growth factor conditioning to modify the properties of human cell derived extracellular matrix

We have recently reported on a bench‐top approach for isolating extracellular matrix (ECM) from pure populations of cells grown in culture using sacrificial, open‐celled foams to concentrate and capture the ECM. To increase both the accumulation and the strength of the ECM harvested, cell‐seeded polyurethane (PU) foams were cultured in media supplemented with either transforming growth factor β‐1 (TGFβ1) or hepatocyte growth factor (HGF). At the end of a 3‐week culture period, ECM yield was significantly increased for samples conditioned in supplemented media. Control foams yielded 48 ± 12 mg of material for every gram of PU foam seeded. Yield values increased to 102 ± 21 and 243 ± 25 mg for HGF and TGFβ1‐treated samples, respectively. HGF supplementation increased the modulus by 59%, while TGFβ1 treatment increased the elastic modulus by 204%. TGFβ1‐stimulated material was organized into a network that was markedly denser than control material, with HGF‐stimulated network density intermediate to TGFβ1 and controls. Our study showed that TGFβ1‐treated samples were collagen enriched while HGF samples had an increased gylcosaminoglycan concentration. The results demonstrate that growth factor supplementation, particularly with TGFβ1, can significantly alter the biomechanical properties of cell‐derived ECM that may be used for therapeutic applications. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Preparation, characterization and cytocompatibility of polyurethane/cellulose based liquid crystal composite membranes

Two types of polyurethane/liquid crystal (PU/LC) composite membranes with different LC contents, namely polyurethane/octyl hydroxypropyl cellulose ester (PU/OPC) and polyurethane/propyl hydroxypropyl cellulose ester (PU/PPC), were prepared and studied. The effects of surface properties on cell compatibility of the membranes were elucidated. PPC tended to assemble to independent phases in the composite membranes, while OPC formed uniformly distributed LC domains. As the introduction of LC, phase separation occurred, and the crystallization of PU was disrupted. The surface of PU/LC composite membranes showed fingerprint texture and two-phase morphology. Hydrophilicity of the two types of composite membranes exhibited a reversal tendency with the increase of LC contents. Cells seeded on the composite membranes presented favorable growth when the content of LC was over 30%, especially on PU/OPC complex. The surface morphology, phase separation between LC and PU as well as the type of LC showed significant effects on the cell behaviors.     

Used cot mattresses as potential reservoirs of bacterial infection: nutrient availability within polyurethane foam

Aim: To evaluate possible source of nutrients for bacterial growth within polyurethane (PU) foam of used cot mattresses as determinants of bacterial population density. Methods and Results: Used infant mattresses (n = 30) were analysed for bacteria capable of degrading colloidal PU and for aqueous soluble chemical components (aromatic amines, ammonium ions, phosphates and protein). Mattress type (waterproof cover vs exposed PU foam at the infant‐head region), mattress age and previous use by another child were evaluated as factors that could influence the measured parameters. The levels of protein extracted from PU foam were (i) significantly (P = 0·0019) higher for mattresses lacking a waterproof cover at the infant‐head region and (ii) positively correlated with both culturable bacterial population densities of the PU foams and extent of growth of Staphylococcus aureus on aqueous leachates. No statistically significant (P > 0·05) associations between other measured parameters and mattress type/use factors were identified. Conclusions: Infant use of cot mattresses with exposed PU foam leads to accumulation of proteins within the PU, which can promote bacterial growth. Significance and Impact of the Study: The study provides a mechanistic explanation for increased levels of bacteria associated with exposed PU of cot mattresses. In the context of the common bacterial toxins hypothesis for the sudden infant death syndrome (SIDS), this could explain the lowered risk of SIDS associated with use of a waterproof cover above the mattress.     

Ferrous iron oxidation by foam immobilized Acidithiobacillus ferrooxidans: Experiments and modeling

Ferrous iron bio‐oxidation by Acidithiobacillus ferrooxidans immobilized on polyurethane foam was investigated. Cells were immobilized on foams by placing them in a growth environment and fully bacterially activated polyurethane foams (BAPUFs) were prepared by serial subculturing in batches with partially bacterially activated foam (pBAPUFs). The dependence of foam density on cell immobilization process, the effect of pH and BAPUF loading on ferrous oxidation were studied to choose operating parameters for continuous operations. With an objective to have high cell densities both in foam and the liquid phase, pretreated foams of density 50 kg/m³ as cell support and ferrous oxidation at pH 1.5 to moderate the ferric precipitation were preferred. A novel basket‐type bioreactor for continuous ferrous iron oxidation, which features a multiple effect of stirred tank in combination with recirculation, was designed and operated. The results were compared with that of a free cell and a sheet‐type foam immobilized reactors. A fivefold increase in ferric iron productivity at 33.02 g/h/L of free volume in foam was achieved using basket‐type bioreactor when compared to a free cell continuous system. A mathematical model for ferrous iron oxidation by Acidithiobacillus ferrooxidans cells immobilized on polyurethane foam was developed with cell growth in foam accounted by an effectiveness factor. The basic parameters of simulation were estimated using the experimental data on free cell growth as well as from cell attachment to foam under nongrowing conditions. The model predicted the phase of both oxidation of ferrous in shake flasks by pBAPUFs as well as by fully activated BAPUFs for different cell loadings in foam. Model for stirred tank basket bioreactor predicted within 5% both transient and steady state of the experiments closely for the simulated dilution rates. Bio‐oxidation at high Fe²⁺ concentrations were simulated with experiments when substrate and product inhibition coefficients were factored into cell growth kinetics. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Establishment of a Highly Efficient Ammonia Secreting Mutant of Synechococcus sp. PCC 7942 and the Glutamine Synthetase Activity,Photosynthesis and Growth in Its Immobilized Cells

A recombinate plasmid pDC-ATGS was constructed, which contained the antisense fragment of glnA gene from Anabaena sp. PCC 7120 and transformed the unicellular cyanobactefium Synechococcus sp. PCC 7942. The foreign DNA was inserted into the site of glnA locus of the chromosome through the homologous recombination. By using neomyisin, a highly efficient ammonia secretion mutant was selected. After immobilized, the cells of the mutant within polyurethane (PU) foams, glutamine synthetase (GS) and NIt4+ secretory activity of GS, and its growth and photosynthesis were measured. It was shown that NH4+ secretion of the immobilized mutant was enhanced 156 folds which was much higher than that of free-living cells of the wild type. The activity of GS was decreased by 73.6%. Growth of the mutant was the same as that of the wild type. The activity of photosystem Ⅱ in the immobilized mutant cells increased by 44% with 77 K fluorescence spectrum measurement.     

Structure and properties of polyurethanes prepared from triglyceride polyols by ozonolysis

Ozonolysis was used to obtain polyols with terminal primary hydroxyl groups and different functionalities from trilinolein (or triolein), low-saturation canola oil, and soybean oil. The functionality of the model polyol from triolein (trilinolein) was 3.0 and that of soy polyol was 2.5, due to the presence of unreactive saturated fatty acids, while canola gave a polyol with a functionality of 2.8. All polyols exhibited a high tendency to crystallize at room temperature. The resulting waxes had melting points comparable to that of paraffin and very low viscosities in the liquid state. The polyols were cross-linked using 4,4'-methylenebis(phenyl isocyanate) to give polyurethanes. Glass transitions (T(g)) for the model-, canola-, and soy-based polyurethanes were 53, 36, and 22 degrees C, respectively. The about 30 degrees C lower T(g) of the soy-based polyurethane than that of the model polyurethane was the result not only of lower functionality but also of the presence of saturated fatty acids in the former. Polyurethane from the canola polyol had intermediate cross-linking density and properties. These polyurethanes displayed excellent mechanical properties and higher glass transition temperatures compared to polyurethanes from epoxidized and hydroformylated polyols of the same functionality, presumably due to the absence or lower content of dangling chains in the former.     

Bioanode of polyurethane/graphite/polypyrrole composite in microbial fuel cells

Polyurethane (PU) foams were coated with graphite, and pyrrole monomer was subsequently polymerized onto its surface by chemical oxidization to obtain nanostructured polyurethane/graphite/polypyrrole (PU/Graph/PPy) composites, which were used for anaerobic microorganisms grown and tested as anodes in microbial fuel cells (MFC) using municipal wastewater as fuel. The effects of oxidizing agent type (ammonium persulfate and FeCl3) used in pyrrole polymerization on the performance of electrodes in MFC were studied. Composites were characterized by Fourier Transform Infrared (FTIR) spectroscopy, Scanning Electron Microscopy (SEM), and by the four-point probes to determine conductivity. It was observed from SEM analysis that globular nanostructures of PPy were formed onto PU surface with average diameters between 120 and 450 nm, which are typical of aqueous polymerization of pyrrole monomer. The highest output power density observed in MFCs was 305.5 mW/m³ for the composite synthesized using FeCl₃ as the oxidant, and 128.6 mW/m³ using the composite obtained with ammonium persulfate as oxidizing; the corresponding chemical oxygen demand (COD) removal were 48.2 and 45.5%, respectively. The calculated coulombic efficiency for PU/Graph/PPy composite obtained with FeCl₃ as oxidant was of 9.4%. Internal resistance of MFC using the composite obtained with FeCl₃ as oxidant was determined by linear sweep voltammetry (LSV) and the variable resistance (VR) methods, giving 4.8 and 2.9 kO, respectively, with average maximum power density of 237.5 mW/m³.     

Assessment of the in vivo biofunctionality of a biomimetic hybrid scaffold for osteochondral tissue regeneration

Chondral and osteochondral lesions represent one of the most challenging problems in the orthopedic field, as these types of injuries lead to disability and worsened quality of life for patients and have an economic impact on the healthcare system. The aim of this in vivo study was to develop a new tissue engineering approach through a hybrid scaffold for osteochondral tissue regeneration made of porous polyurethane foam (PU) coated under vacuum with calcium phosphates (PU/VAC). Scaffold characterization showed a highly porous and interconnected structure. Human amniotic mesenchymal stromal cells (hAMSCs) were loaded into scaffolds using pectin (PECT) as a carrier. Osteochondral defects in medial femoral condyles of rabbits were created and randomly allocated in one of the following groups: plain scaffold (PU/VAC), scaffold with hAMSCs injected in the implant site (PU/VAC/hAMSC), scaffold with hAMSCs loaded in pectin (PU/VAC/PECT/hAMSC), and no treated defects (untreated). The therapeutic efficacy was assessed by macroscopic, histological, histomorphometric, microtomographic, and ultrastructural analyses at 3, 6, 12, and 24 weeks. Histological results showed that the scaffold was permissive to tissue growth and penetration, an immature osteocartilaginous tissue was observed at early experimental times, with a more accentuated bone regeneration in comparison with the cartilage layer in the absence of any inflammatory reaction.     

Biosynthesis and Characterization of Poly(3-hydroxybutyrate-co-3- hydroxyhexanoate) from Palm Oil Products in a Wautersia eutropha Mutant

Palm kernel oil, palm olein, crude palm oil and palm acid oil were used for the synthesis of poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] by a mutant strain of Wautersia eutropha (formerly Ralstonia eutropha) harboring the Aeromonas caviae polyhydroxyalkanoate (PHA) synthase gene. Palm kernel oil was an excellent carbon source for the production of cell biomass and P(3HB-co-3HHx). About 87% (w/w) of the cell dry weight as P(3HB-co-3HHx) was obtained using 5 g palm kernel oil/l. Gravimetric and microscopic analyses further confirmed the high PHA content in the recombinant cells. The molar fraction of 3HHx remained constant at 5 mol % regardless of the type and concentration of palm oil products used. The small amount of 3HHx units was confirmed by ¹³C NMR analysis. The number average molecular weight (M_n) of the PHA copolymer produced from the various palm oil products ranged from 27 0000 to 46 0000 Da. The polydispersity was in the range of 2.6–3.9.