Resolution of 4-(1-hydroxy-2,2,2-trifluoroethyl)phenol and its derivatives by lipase-catalyzed enantioselective alcoholysis

Lipase LIP from Pseudomonas aeruginosa,one of nine commercially available hydrolytic enzymes, catalyzed the enantioselective alcoholysis of racemic 4-(1-acetoxy-2,2,2-trifluoroethyl)phenyl acetate with n-butanol, affording (S)-4-(1-hydroxy-2,2,2-trifluoroethyl)phenol at >99% e.e. (E = >100). Moreover, it also showed high enantioselectivity (E = >100) for the alcoholysis of the racemic o-substituted isomer, 2-(1-acetoxy-2,2,2-trifluoroethyl)phenyl acetate.     

Halo lipids, 8. Synthesis of O-alkyl-O-alkyl-O-(2,2,2-trifluoroethyl)glycerols and O-alkyl-O-(2,2,2-trifluoroethyl)glycero-phosphocholines

The syntheses and structure determination of 3 positional isomers of O-alkyl-O-(2,2,2,-trifluoroethyl)glycerols and their conversion into the corresponding O-alkyl-O-(2,2,2-trifluoroethyl)glycerophosphocholines via the [O-alkyl-O-(2,2,2-trifluoroethyl)glycero]-2-bromoethyl hydrogen phosphates are described.     

A New Cold-Adapted,Organic Solvent Stable Lipase from Mesophilic Staphylococcus epidermidis AT2

The gene encoding a cold-adapted, organic solvent stable lipase from a local soil-isolate, mesophilic Staphylococcus epidermidis AT2 was expressed in a prokaryotic system. A two-step purification of AT2 lipase was achieved using butyl sepharose and DEAE sepharose column chromatography. The final recovery and purification fold were 47.09 % and 3.45, respectively. The molecular mass of the purified lipase was estimated to be 43 kDa. AT2 lipase was found to be optimally active at pH 8 and stable at pH 6–9. Interestingly, this enzyme demonstrated remarkable stability at cold temperature (<30 °C) and exhibited optimal activity at a temperature of 25 °C. A significant enhancement of the lipolytic activity was observed in the presence of Ca²⁺, Tween 60 and Tween 80. Phenylmethylsulfonylfluoride, a well known serine inhibitor did not cause complete inhibition of the enzymatic activity. AT2 lipase exhibited excellent preferences towards long chain triglycerides and natural oils. The lipolytic activity was stimulated by dimethylsulfoxide and diethyl ether, while more than 50 % of its activity was retained in methanol, ethanol, acetone, toluene, and n-hexane. Taken together, AT2 lipase revealed highly attractive biochemical properties especially because of its stability at low temperature and in organic solvents.     

Kinetic and thermodynamic analysis of Candida antarctica lipase B-catalyzed alcoholytic resolution of (R,S)-β-butyrolactone in organic solvents

Optically pure (R)-β-butyrolactone as an important chiral building block in the syntheses of various biologically active compounds and biodegradable polymers was prepared from (R,S)-β-butyrolactone through kinetic resolution. Candida antarctica lipase B (CALB) with a high enantiomeric ratio of 198 enantioselectively catalyzed the ring opening of the racemate with methanol in methyl tert-butyl ether at 45 °C and yielded the remaining (R)-β-butyrolactone. A detailed kinetic analysis indicated that methanol and (R)- and (S)-methyl ester all acted as competitive inhibitors for the enzyme. Comparisons of the theoretical and experimental conversions for both enantiomers were further made and elucidated. The thermodynamic analysis implied the enantiomer discrimination for the transition states of both enantiomers to be entropy-driven in the temperature range investigated. Moreover, preliminary results from the lipase reusability, feed-batch operation, and remaining substrate recovery were addressed.     

A novel control of enzymatic enantioselectivity through the racemic temperature influenced by reaction media

The influence of reaction media on the racemic temperature (T_r) in the lipase-catalyzed resolution of ketoprofen vinyl ester was investigated. An effective approach to the control of the enzymatic enantioselectivity and the prediction of the increasing tendency was developed based on the T_r influenced by reaction media. The T_r for the resolution catalyzed by Candida rugosa lipase (CRL) was found at 29 °C in aqueous and S-ketoprofen was obtained predominantly at 40 °C. However, CRL showed R-selectivity at 40 °C in diisopropyl ether because the T_r was changed to 56 °C. CRL, lipase from AYS Amano^® and Mucor javanicus lipase were further applied for the investigation of the enzymatic enantioselectivity in dioxane, DIPE, isooctane and their mixed media with water. The effects of the reaction medium on T_r could be related to the solvent hydrophobicity, the lipase conformational flexibility and the interaction between the enantiomers and the lipase.     

Cloning, expression, and biochemical characterization of a thermostable lipase from Geobacillus stearothermophilus JC

A thermophilic lipase gene of Geobacillus stearothermophilus JC was cloned and expressed in a pET 28-a (+) expression vector. The biochemical properties of the recombinant enzyme and its enantioselective hydrolysis of (RS)-1-phenylethyl acetate were studied. Removal of the signal peptide greatly increased the enzyme’s expression level by 4.3 times. The purified JC lipase had an optimum temperature of 55°C and optimum pH of 9. Furthermore, comparisons with other enzymes suggest that a few amino acid alterations may significantly change the thermostability of this enzyme. The hydrolysis of (RS)-1-phenylethyl acetate with the crude recombinant JC lipase at 25°C produce (R)-1-phenylethanol in 97.7% e.e. and 46.1% yield after 24 h, corresponding to an E value of 237.     

Enantioselective hydrolysis of (R,S)-naproxen 2,2,2-trifluoroethyl ester in water-saturated solvents via lipases from Carica pentagona Heilborn and Carica papaya

A crude lipase prepared from Carica pentagona Heilborn latex was explored as an effective enantioselective biocatalyst for the hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl ester in water-saturated organic solvents. Comparisons of the enzyme performance with that from Carica papaya lipase indicated that both lipases showed low tolerance to the hydrophilic solvent and were inhibited by (S)-naproxen and 2,2,2-trifluoroethanol. Improvements on the enzyme activity and enantioselectivty were demonstrated when both lipases in partially purified forms were employed. By using the thermodynamic analysis, the enantiomeric discrimination was mainly driven by the difference of activation enthalpy for all reaction systems except for employing Carica papaya lipase as the biocatalyst for (R,S)-fenoprofen 2,2,2-trifluoroethyl thioester.     

Ectoine improves yield of biodiesel catalyzed by immobilized lipase

To improve the production of biodiesel by enzymatic conversion of triglycerides in cottonseed oil, compatible solutes were added to the solvent-free methanolysis system to prevent competitive methanol inhibition on the immobilized lipase (Novozym^® 435). The results indicated that the addition of ectoine increased biodiesel synthesis using a three-step methanol addition process. The concentration of methyl ester (ME) reached a maximum of 95.0% in the presence of 1.1 mmol/l ectoine, an increase of 20.9% compared to that in the absence of ectoine. On the other hand, excess ectoine decreased the ME concentration. Ectoine was also shown to enhance reuse of the immobilized lipase, significantly improving ME concentrations in each recycling test. Total concentrations of ME with added ectoine were about 1.5 times that without ectoine during five recycling tests (molar ratio of cottonseed oil to methanol, 1:4). Enzymatic reaction kinetics showed, in the concentration ranges of 0.8–1.14 mol/l and 0.03–8 mol/l for triglyceride and methanol, respectively, that ectoine had no effect on the initial reaction rates when methanol concentrations were below 0.5 mol/l. When methanol concentration exceeded 0.5 mol/l, the addition of 0.8 mmol/l ectoine increased the initial reaction rates, and the lipase exhibited a lower affinity for methanol and higher affinity for triglyceride (kinetic parameters of K_mA increase, K_mTG decrease). However, the initial reaction rates decreased significantly when 8 mmol/l ectoine was added, with the lipase having higher affinity for methanol and lower affinity for triglyceride (K_mA decrease, K_mTG increase). The supplementation of ectoine provided a new method for the purpose of improving yield of biodiesel catalyzed by enzyme.     

Lipase catalyzed polytransesterification in an organic solvent

Summary Lipase-catalyzed polytransesterification ofbis(2,2,2-trifluoroethyl) dodecanedioate with aliphatic diols (from 1,2-ethanediol to 1,6-hexanediol) was studied with 4 enzymes and a number of solvents. The effects of experimental parameters were investigated with the purpose of obtaining a polyester of as high as possible average molar mass. The highest mass average molar mass (M _w) of 34,750 g mol^-1 (DP = 122) was obtained under vacuum with 1,4-butanediol,Mucor miehei lipase, and diphenyl ether as solvent.     

Conversion of the reactive sulfhydryl groups of proteins to the S-trifluoroethyl derivatives: Application to human hemoglobin

The S-2,2,2-trifluoroethyl residue (-SCH₂CF₃) has been incorporated into human hemoglobin, Hb₄(SH)₂, as an extrinsic probe at Cys-β93 through formation of a disulfide bond. The thiol group was activated by reaction with 5,5′-dithiobis(2-nitrobenzoic acid), Hb₄(SSCH₂CF₃)₂ then being obtained by reaction with 2,2,2-trifluoroethanethiol. Both disulfide interchange reactions proceed to completion with a modest excess of reagents using dilute solutions of hemoglobin (0.005 m heme). The stoichiometry of each disulfide interchange reaction is readily determined by measurement of 5-thio-2-nitrobenzoic acid, a product of each reaction. The functional properties of Hb₄ (SSCH₂CF₃)₂ were found to be similar to those of Hb₄(SH)₂. At pH 7.0 and 20°C the partial pressure of oxygen required for half saturation was 0.45 mm Hg in 0.050 m 2,2-bis(hydroxymethyl)-2,2′,2″-nitrilo-triethanol, 4.1 mm Hg in 0.050 m potassium phosphate, and 16.5 mm Hg in 0.010 m inositol hexaphosphate. The n values of the Hill plots were 1.45, 1.80, and 2.3, respectively. The equilibrium constant for the tetramer-dimer dissociation reaction, K_4,2, of the carbon monoxide derivative was 2.1 × 10^?7m. The time course for combination with carbon monoxide was homogeneous at 432 nm. In the presence of inositol hexaphosphate the time course of combination with carbon monoxide was wavelength dependent.     

Mucor circinelloides whole-cells as a biocatalyst for the production of ethyl esters based on babassu oil

The intracellular lipase production by Mucor circinelloides URM 4182 was investigated through a step-by-step strategy to attain immobilized whole-cells with high lipase activity. Physicochemical parameters, such as carbon and nitrogen sources, inoculum size and aeration, were studied to determine the optimum conditions for both lipase production and immobilization in polyurethane support. Olive oil and soybean peptone were found to be the best carbon and nitrogen sources, respectively, to enhance the intracellular lipase activity. Low inoculum level and poor aeration rate also provided suitable conditions to attain high lipase activity (64.8 ± 0.8 U g^?1). The transesterification activity of the immobilized whole- cells was assayed and optimal reaction conditions for the ethanolysis of babassu oil were determined by experimental design. Statistical analysis showed that M. circinelloides whole-cells were able to produce ethyl esters at all tested conditions, with the highest yield attained (98.1 %) at 35 °C using an 1:6 oil-to-ethanol molar ratio. The biocatalyst operational stability was also assayed in a continuous packed bed reactor (PBR) charged with glutaraldehyde (GA) and Aliquat-treated cells revealing half-life of 43.0 ± 0.5 and 20.0 ± 0.8 days, respectively. These results indicate the potential of immobilized M. circinelloides URM 4182 whole-cells as a low-cost alternative to conventional biocatalysts in the production of ethyl esters from babassu oil.     

Controllable selective enzymatic synthesis of N-acyl and O-acylpropranolol vinyl esters and preparation of polymeric prodrug of propranolol

Controllable selective synthesis strategy of polymerizable N-acyl and O-acylpropranolol vinyl derivatives was developed by enzyme-catalyzed acylation of propranolol using divinyl dicarboxylates with different carbon chain length as acyl donor. The influence of parameters including enzyme, solvents and chain length of acyl donor on the reaction was investigated in detail. Lipase AY30 in diisopropyl ether demonstrated high selectivity towards the amino group of propranolol, while lipase M from Mucor javanicus in dioxane acylated selectively the hydroxyl group of propranolol. N-Acylpropranolol (3a–3c) and O-acylpropranolol vinyl (4a–4c) derivatives were obtained successfully, and can be used for preparing functional macromolecular prodrugs of beta-blockers drugs. N-(Vinyladipoyl)propranolol (NVAP) was copolymerized with methyl methacrylate (MMA) using AIBN as initiator. The obtained polymeric prodrug was characterized with IR, NMR and GPC. The poly(NVAP-co-MMA) has M_n of 3.23 × 10⁴, and M_w/M_n of 1.66.     

Synthesis of poly(ε-caprolactone) by an immobilized lipase coated with ionic liquids in a solvent-free condition

Polycaprolactone (PCL) was synthesized by ring-opening polymerization of ε-caprolactone through two different enzymatic processes. The lipase from Candida antarctica B, immobilized on macroporous acrylic acid beads, was employed either untreated or coated with small amounts of ionic liquids (ILs). Monocationic ionic liquids, [C _n MIm][NTf₂] (n = 2, 6, 12), as well as a dicationic ionic liquid, ([C₄(C₆Im)₂][NTf₂]₂), were used to coat the immobilized lipase and also as the reaction medium. In both methods, the polarity, anion of the ILs concentration and viscosity strongly influenced the reaction. Coating the immobilized enzyme with ILs improved catalytic activity and less ILs was required to produce PCL with a higher molecular weight and reaction yield. At 60 °C and ILs/Novozyme-435 coating ratio of 3:1 (w/w) for 48 h, the highest M _w and reaction yield of PCL were 35,600 g/mol and 62 % in the case of [C₁₂MIm][NTf₂], while the M _w and reaction yield of PCL was 20,300 g/mol and 54 % with [C₁₂MIm][NTf₂] and catalyzed by untreated lipase.     

Enzymatic resolution of 2-phenoxy-1-propanols through the enantioselective acylation mediated by Achromobacter sp. lipase

2-(Substituted phenoxy)-1-propanols, e.g. 2-(4-chlorophenoxy)-1-propanol, belonging to primary alcohols with an oxygen atom at the stereocenter, were resolved with moderate to good enantioselectivity, as judged by the value of enantiomeric ratio E (up to 27), through the enantioselective acylation with vinyl butanoate mediated by the little-known lipase from Achromobacter sp. in diisopropyl ether, after the examination of potential factors affecting the reaction such as organic solvents and acyl donors.     

Drosera peltata Smith var. lunata (Buch.-Ham.) C. B. Clarke as a feasible source of plumbagin: phytochemical analysis and antifungal activity assay

Drosera peltata Smith var. lunata (Buch.-Ham.) C. B. Clarke (DPVL) fractions and plumbagin were tested via broth microdilution techniques on Rhizopus oryzae, Aspergillus flavus, Aspergillus niger, Aspergillus oryzae, Penicillium citrinum. All of the test substances [petroleum ether, chloroform, ethyl acetate, n-butanol fraction and aqueous residue (AR)] except for the AR were active against all the tested strains. The petroleum ether fraction (PEF) was the most active (MIC = 5.86–46.88 μg/ml, MFC = 23.44–93.75 μg/ml) of the five tested substances and therefore, was selected for further analysis. Based on antifungal activity, bioactivity-guided fractionation of the PEF led to the isolation of plumbagin. The structure of plumbagin was elucidated by ¹H and ¹³C NMR. Using HPLC, DPVL was found to be a new source of plumbagin. Reversed-phase HPLC was performed using a mobile phase of water and methanol, and peaks were detected at 254 nm. Plumbagin showed a good linear relationship at concentrations ranging from 0.625 to 10 μg/ml. Both the intraday and the interday precision showed that the method was precise, with RSDs of at least 3 % at different concentrations. Recovery rates ranging from 97.86 to 99.94 % were observed, which indicate that the method is accurate. The specificity of the method was established by checking the peak purity of plumbagin. For six independent measurements, the average plumbagin content in DPVL was 11.05 ± 0.31 mg/g of dried material. The validated HPLC method provides a new basis for assessing DPVL quality.     

Improvement of cell-bound lipase from Rhodotorula mucilaginosa P11I89 for use as a methanol-tolerant, whole-cell biocatalyst for production of palm-oil biodiesel

Rhodotorula mucilaginosa P11I89, isolated from oil-contaminated soil, was effectively used as the methanol-tolerant, whole-cell lipase for the synthesis of fatty acid methyl ester (FAME) via transesterification reaction in the presence of palm oil and methanol substrates at a 1:6 mole ratio. A combination of Taguchi experimental design and response surface methodology (RSM) were applied to systemically enhance transesterification activity of the whole-cell lipase or cell-bound lipase (CBL) from R. mucilaginosa P11I89 in a solvent-free system. The significant impacts of four factors including carbon sources, nitrogen sources, surfactants and pH on hydrolysis activity of extracellular and cell-bound lipases, and on the transesterification activity of CBL were evaluated using Taguchi design. Gum Arabic was the most significant component for high transesterification activity, whereas soybean oil was the most influential factor for the hydrolysis activity. Maximal CBL production of 272.72 U/L was obtained in the cultivation medium containing 2.1 % palm oil, 0.2 % NH₄NO₃ , and 0.45 % Gum Arabic, with initial pH 5.0 under shaking speed of 200 rpm at a temperature of 30?±?2 °C after 60 h incubation using Central Composite Design (CCD). Yeast cells grown under such conditions increased FAME yield from 84.0 to 92.98 % when the transesterification reaction was carried out, in comparison to those cultivated in the initial medium.     

Enzymatic synthesis of poly(ε-caprolactone) in monocationic and dicationic ionic liquids

Enzymatic polymerization can offer metal-free routes to polymer materials that could be used in biomedical applications. To take advantage of the unique properties of ionic liquids (ILs) for enzyme stability, monocationic ionic liquid (MIL) and dicationic ionic liquid (DIL) were used to promote the ring-opening polymerization of ε-caprolactone (ε-CL) using Candida antarctica lipase B as catalyst. Considering the molecular weight (M _n ) and reaction yield of the resulting polymer (PCL), high density and viscosity of ILs would be good, especially in the case of DIL. With the same total alkyl chain length, the density and viscosity of [C₄(C₆Im)₂][PF₆]₂ were higher than that of [C₁₂MIm][PF₆]. Using a lipase/CL/ILs ratio of 1:20:20 (by wt) for 48 h at 90 °C, the highest M _n and reaction yield of PCL were 26,200 g/mol and 62 % with [C₄(C₆Im)₂][PF₆]₂, while the M _n and reaction yield of PCL obtained in [C₁₂MIm][PF₆] were 11,700 g/mol and 37 %.     

Biodiesel production in a magnetically-stabilized, fluidized bed reactor with an immobilized lipase in magnetic chitosan microspheres

Biodiesel production by immobilized Rhizopus oryzae lipase in magnetic chitosan microspheres (MCMs) was carried out using soybean oil and methanol in a magnetically-stabilized, fluidized bed reactor (MSFBR). The maximum content of methyl ester in the reaction mixture reached 91.3 (w/v) at a fluid flow rate of 25 ml/min and a magnetic field intensity of 150 Oe. In addition, the MCMs-immobilized lipase in the reactor showed excellent reusability, retaining 82 % productivity even after six batches, which was much better than that in a conventional fluidized bed reactor. These results suggested that a MSFRB using MCMs-immobilized lipase is a promising method for biodiesel production.     

Biocatalytic potential of lipase from Staphylococcus sp. MS1 for transesterification of jatropha oil into fatty acid methyl esters

An extracellular lipase producing isolate Staphylococcus sp. MS1 was optimized for lipase production and its biocatalytic potential was assessed. Medium with tributyrin (0.25 %) and without any exogenous inorganic nitrogen source was found to be optimum for lipase production from Staphylococcus sp. MS1. The optimum pH and temperature for lipase production were found to be pH 7 and 37 °C respectively, showing lipase activity of 37.91 U. It showed good lipase production at pH 6–8. The lipase was found to be stable in organic solvents like hexane and petroleum ether, showing 98 and 88 % residual activity respectively. The biotransformation using the concentrated enzyme in petroleum ether resulted in the synthesis of fatty acid methyl esters like methyl oleate, methyl palmitate and methyl stearate. Thus, the lipase under study has got the potential to bring about transesterification of oils into methyl esters which can be exploited for various biotechnological applications.     

Butyldimethylsilyl ethers of iodine-catalysed solvolysis products of long-chain epoxides

Epoxides of methyl esters of elaidic and oleic acids were allowed to react with methanol, ethanol, n-propanol, iso-propanol and n-butanol, in the presence of iodine, to give the corresponding alkoxyhydroxy methyl esters. Ethyl elaidate epoxide gave a hydroxymethoxy methyl ester when treated with boron trifluoride in methanol but the ethyl ester group was not attacked with iodine as catalyst. Mass spectra of the alkoxyhydroxy esters contained strong peaks which demonstrated the location in the chain of the original epoxide ring. Iodine also catalysed the addition of water to methyl elaidate or oleate, giving erythro- and threo-9,10-dihydroxyoctadecanoates, respectively. The alkoxyhydroxy esters were quantitatively converted to t-butyldimethylsilyl ethers by reaction with t-butyldimethylchlorosilane/imidazole/dimethylformamide reagent at 100°C but the dihydroxyoctadecanoates were not completely derivatised. Mass spectra of all the t-butyldimethylsilyl ether derivatives contained intense fragments allowing the molecular weights and the positions of the ether functions to be easily determined.