Structural studies of FIV and HIV-1 proteases complexed with an efficient inhibitor of FIV protease

Three forms of feline immunodeficiency virus protease (FIV PR), the wild type (wt) and two single point mutants, V59I and Q99V, as well as human immunodeficiency virus type 1 protease (HIV-1 PR), were cocrystallized with the C2-symmetric inhibitor, TL-3. The mutants of FIV PR were designed to replace residues involved in enzyme-ligand interactions by the corresponding HIV-1 PR residues at the structurally equivalent position. TL-3 shows decreased (improved) inhibition constants with these FIV PR mutants relative to wt FIV PR. Despite similar modes of binding of the inhibitor to all PRs (from P3 to P3'), small differences are evident in the conformation of the Phe side chains of TL-3 at the P1 and P1' positions in the complexes with the mutated FIV PRs. The differences mimick the observed binding of TL-3 in HIV-1 PR and correlate with a significant improvement in the inhibition constants of TL-3 with the two mutant FIV PRs. Large differences between the HIV-1 and FIV PR complexes are evident in the binding modes of the carboxybenzyl groups of TL-3 at P4 and P4'. In HIV-1 PR:TL-3, these groups bind over the flap region, whereas in the FIV PR complexes, the rings are located along the major axis of the active site. A significant difference in the location of the flaps in this region of the HIV-1 and FIV PRs correlates with the observed conformational changes in the binding mode of the peptidomimetic inhibitor at the P4 and P4' positions. These findings provide a structural explanation of the observed Ki values for TL-3 with the different PRs and will further assist in the development of improved inhibitors.     

F99 is Critical for Dimerization and Activation of South African HIV-1 Subtype C Protease

HIV-1 protease (PR) is an obligate homodimer which plays a pivotal role in the maturation and hence propagation of HIV. Although successful developments on PR active site inhibitors have been achieved, the major limiting factor has been the emergence of HIV drug-resistant strains. Disruption of the dimer interface serves as an alternative mechanism to inactivate the enzyme. The terminal residue, F99, was mutated to an alanine to investigate its contribution to dimer stability in the South African HIV-1 subtype C (C-SA) PR. The F99A PR and wild-type C-SA PR were overexpressed and purified. The activities of the PRs and their ability to bind an active site inhibitor, acetyl-pepstatin, were determined in vitro. The F99A PR showed no activity and the inability to bind to the inhibitor. Secondary and quaternary structure analysis were performed and revealed that the F99A PR is monomeric with reduced β-sheet content. The mutation of F99 to alanine disrupted the presumed ‘lock-and-key’ motif at the terminal dimer interface, in turn creating a cavity at the N- and C-terminal antiparallel β-sheet. These findings support the design of inhibitors targeting the C-terminus of the C-SA PR, centered on interactions with the bulky F99.     

Mapping the interaction between the cytoplasmic domains of HIV-1 viral protein U and human CD4 with NMR spectroscopy

Viral protein?U (VpU) of HIV-1 plays an important role in downregulation of the main HIV-1 receptor CD4 from the surface of infected cells. Physical binding of VpU to newly synthesized CD4 in the endoplasmic reticulum is an early step in a pathway leading to proteasomal degradation of CD4. In this study, regions in the cytoplasmic domain of VpU involved in CD4 binding were identified by NMR spectroscopy. Amino acids in both helices found in the cytoplasmic region of VpU in membrane-mimicking detergent micelles experience chemical shift perturbations upon binding to CD4, whereas amino acids between the two helices and at the C-terminus of VpU show no or only small changes, respectively. The topology of the complex was further studied with paramagnetic relaxation enhancement. Paramagnetic spin labels were attached at three sequence positions of a CD4 peptide comprising the transmembrane and cytosolic domains of the receptor. VpU binds to a membrane-proximal region in the cytoplasmic domain of CD4. STRUCTURED DIGITAL ABSTRACT: VpU?and?CD4?bind?by?nuclear magnetic resonance?(View interaction).     

Comparative analysis of the sequences and structures of HIV-1 and HIV-2 proteases

The different isolates available for HIV-1 and HIV-2 were compared for the region of the protease (PR) sequence, and the variations in amino acids were analyzed with respect to the crystal structure of HIV-1 PR with inhibitor. Based on the extensive homology (39 identical out of 99 residues), models were built of the HIV-2 PR complexed with two different aspartic protease inhibitors, acetylpepstatin and a renin inhibitor, H-261. Comparison of the HIV-1 PR crystal structure and the HIV-2 PR model structure and the analysis of the changes found in different isolates showed that correlated substitutions occur in the hydrophobic interior of the molecule and at surface residues involved in ionic or hydrogen bond interactions. The substrate binding residues of HIV-1 and HIV-2 PRs show conservative substitutions of four residues. The difference in affinity of HIV-1 and HIV-2 PRs for the two inhibitors appears to be due in part to the change of Val 32 in HIV-1 PR to Ile in HIV-2 PR.     

Structural insights of the MLF1/14-3-3 interaction

Myeloid leukaemia factor 1 (MLF1) binds to 14-3-3 adapter proteins by a sequence surrounding Ser34 with the functional consequences of this interaction largely unknown. We present here the high-resolution crystal structure of this binding motif [MLF1(29-42)pSer34] in complex with 14-3-3ε and analyse the interaction with isothermal titration calorimetry. Fragment-based ligand discovery employing crystals of the binary 14-3-3ε/MLF1(29-42)pSer34 complex was used to identify a molecule that binds to the interface rim of the two proteins, potentially representing the starting point for the development of a small molecule that stabilizes the MLF1/14-3-3 protein-protein interaction. Such a compound might be used as a chemical biology tool to further analyse the 14-3-3/MLF1 interaction without the use of genetic methods. Database Structural data are available in the Protein Data Bank under the accession number(s) 3UAL [14-3-3ε/MLF1(29-42)pSer34 complex] and 3UBW [14-3-3ε/MLF1(29-42)pSer34/3-pyrrolidinol complex] Structured digital abstract ? 14-3-3 epsilon?and?MLF1?bind?by?x-ray crystallography?(View interaction) ? 14-3-3 epsilon?and?MLF1?bind?by?isothermal titration calorimetry?(View Interaction:?1,?2).     

Interactions of different inhibitors with active-site aspartyl residues of HIV-1 protease and possible relevance to pepsin

The importance of the active site region aspartyl residues 25 and 29 of the mature HIV-1 protease (PR) for the binding of five clinical and three experimental protease inhibitors [symmetric cyclic urea inhibitor DMP323, nonhydrolyzable substrate analog (RPB) and the generic aspartic protease inhibitor acetyl-pepstatin (Ac-PEP)] was assessed by differential scanning calorimetry. DeltaT(m) values, defined as the difference in T(m) for a given protein in the presence and absence of inhibitor, for PR with DRV, ATV, SQV, RTV, APV, DMP323, RPB, and Ac-PEP are 22.4, 20.8, 19.3, 15.6, 14.3, 14.7, 8.7, and 6.5 degrees C, respectively. Binding of APV and Ac-PEP is most sensitive to the D25N mutation, as shown by DeltaT(m) ratios [DeltaT(m)(PR)/DeltaT(m)(PR(D25N))] of 35.8 and 16.3, respectively, whereas binding of DMP323 and RPB (DeltaT(m) ratios of 1-2) is least affected. Binding of the substrate-like inhibitors RPB and Ac-PEP is nearly abolished (DeltaT(m)(PR)/DeltaT(m)(PR(D29N)) > or = 44) by the D29N mutation, whereas this mutation only moderately affects binding of the smaller inhibitors (DeltaT(m) ratios of 1.4-2.2). Of the nine FDA-approved clinical HIV-1 protease inhibitors screened, APV, RTV, and DRV competitively inhibit porcine pepsin with K(i) values of 0.3, 0.6, and 2.14 microM, respectively. DSC results were consistent with this relatively weak binding of APV (DeltaT(m) 2.7 degrees C) compared with the tight binding of Ac-PEP (DeltaT(m) > or = 17 degrees C). Comparison of superimposed structures of the PR/APV complex with those of PR/Ac-PEP and pepsin/pepstatin A complexes suggests a role for Asp215, Asp32, and Ser219 in pepsin, equivalent to Asp25, Asp25', and Asp29 in PR in the binding and stabilization of the pepsin/APV complex.     

Kinetic and mechanistic analysis of the association and dissociation of inhibitors interacting with secreted aspartic acid proteases 1 and 2 from Candida albicans

In order to elucidate the characteristics of different aspartic proteases (Sap) secreted by Candida albicans, the kinetics of the interaction (k(on), k(off)) between Sap1 and Sap2 with acetyl-pepstatin and pepstatin A was determined at different pH by biosensor technology. The enzymes were biotinylated and coupled to a streptavidin-coated sensor chip, whereupon acetyl-pepstatin or pepstatin A was injected and the interaction was measured in real time. Sap2 showed a faster k(on) and a higher affinity for acetyl-pepstatin than Sap1, regardless of pH. The values for both k(on) and k(off) decreased with increased pH from 3.8 to 5.0, except for the k(off) for Sap1, which was only influenced by the pH change from 3.8 to 4.4. Binding of acetyl-pepstatin to Sap1 or Sap2 obviously proceeds by a different mechanism than dissociation of the inhibitor. Association appears to be coupled to protonation of a catalytic aspartic acid residue, consistent with reduced k(on) values at higher pH. In contrast, the stability of the complex is reduced at lower pH due to reduced hydrogen bonding capacity of aspartic acid residues acting as hydrogen bond acceptors. Differences in the number and distribution of charged nonactive site residues in Sap1 and Sap2 evidently result in different electrostatic properties of the binding sites, primarily influencing the association step.     

Design and synthesis of pyrazolopyridine derivatives as sphingosine 1-phosphate receptor 2 ligands

Eleven new sphingosine 1-phosphate receptor 2 (S1PR2) ligands were synthesized by modifying lead compound N-(2,6-dichloropyridin-4-yl)-2-(4-isopropyl-1,3-dimethyl-1H-pyrazolo[3,4-b]pyridin-6-yl)hydrazine-1-carboxamide (JTE-013) and their binding affinities toward S1PRs were determined in vitro using [³²P]S1P and cell membranes expressing recombinant human S1PRs. Among these ligands, 35a (IC₅₀?=?29.1?±?2.6?nM) and 35b (IC₅₀?=?56.5?±?4.0?nM) exhibit binding potency toward S1PR2 comparable to JTE-013 (IC₅₀?=?58.4?±?7.4?nM) with good selectivity for S1PR2 over the other S1PRs (IC₅₀?>?1000?nM). Further optimization of these analogues may identify additional and more potent and selective compounds targeting S1PR2.     

Molecular basis for the relative substrate specificity of human immunodeficiency virus type 1 and feline immunodeficiency virus proteases

We have used a random hexamer phage library to delineate similarities and differences between the substrate specificities of human immunodeficiency virus type 1 (HIV-1) and feline immunodeficiency virus (FIV) proteases (PRs). Peptide sequences were identified that were specifically cleaved by each protease, as well as sequences cleaved equally well by both enzymes. Based on amino acid distinctions within the P3-P3' region of substrates that appeared to correlate with these cleavage specificities, we prepared a series of synthetic peptides within the framework of a peptide sequence cleaved with essentially the same efficiency by both HIV-1 and FIV PRs, Ac-KSGVF/VVNGLVK-NH(2) (arrow denotes cleavage site). We used the resultant peptide set to assess the influence of specific amino acid substitutions on the cleavage characteristics of the two proteases. The findings show that when Asn is substituted for Val at the P2 position, HIV-1 PR cleaves the substrate at a much greater rate than does FIV PR. Likewise, Glu or Gln substituted for Val at the P2' position also yields peptides specifically susceptible to HIV-1 PR. In contrast, when Ser is substituted for Val at P1', FIV PR cleaves the substrate at a much higher rate than does HIV-1 PR. In addition, Asn or Gln at the P1 position, in combination with an appropriate P3 amino acid, Arg, also strongly favors cleavage by FIV PR over HIV PR. Structural analysis identified several protease residues likely to dictate the observed specificity differences. Interestingly, HIV PR Asp30 (Ile-35 in FIV PR), which influences specificity at the S2 and S2' subsites, and HIV-1 PR Pro-81 and Val-82 (Ile-98 and Gln-99 in FIV PR), which influence specificity at the S1 and S1' subsites, are residues which are often involved in development of drug resistance in HIV-1 protease. The peptide substrate KSGVF/VVNGK, cleaved by both PRs, was used as a template for the design of a reduced amide inhibitor, Ac-GSGVF Psi(CH(2)NH)VVNGL-NH(2.) This compound inhibited both FIV and HIV-1 PRs with approximately equal efficiency. These findings establish a molecular basis for distinctions in substrate specificity between human and feline lentivirus PRs and offer a framework for development of efficient broad-based inhibitors.     

Mutations that alter the activity of the Rous sarcoma virus protease.

Mutations designed by analysis of the Rous sarcoma virus (RSV) and human immunodeficiency virus (HIV)-1 protease (PR) crystal structures were introduced into 1) the substrate binding pocket, 2) the substrate enclosing "flaps," and 3) surface loops of RSV PR. Each mutant PR was expressed in Escherichia coli. Changes in activity were detected by following cleavage of a truncated (NC-PR) precursor polypeptide in E. coli and cleavage of synthetic peptide substrates representing RSV and HIV-1 PR cleavage sites in vitro. Mutations in the substrate binding pocket exchanged amino acid residues located close to the substrate in the HIV-1 PR for structurally equivalent residues in the RSV PR. Changing histidine 65 to glycine (H65G) gave an inactive enzyme, while a double mutant R105P,G106V, as well as the triple mutant, H65G,R105P,G106V, produced enzymes which showed significant activity toward a substrate that represented a HIV-1 cleavage site. Mutating the catalytic aspartate (D37S) or an adjacent conserved alanine to threonine (A40T), produced inactive enzymes. In contrast, the substitution A40S was active, but showed a reduced rate of catalysis. Mutations in the flaps of conserved glycines (G69L, G70L) produced inactive PRs. Two extended RSV PR surface loops were shortened to the size found in HIV-1 PR and resulted in drastically reduced activity. These results have confirmed some of the basic predictions made from structural models but have also revealed unexpected roles and interactions in the protein.     

Peptides derived from HIV-1 gp120 co-receptor binding domain form amyloid fibrils and enhance HIV-1 infection

Amyloid fibrils play important roles in HIV-1 infection. We found peptides derived from the HIV-1 gp120 co-receptor binding region, which are defined as enhancing peptides (EPs), could form amyloid fibrils and remarkably enhance HIV-1 infection. EPs bound to the virus and promoted the interaction between HIV-1 and target cells. The antiviral efficacy of antiretroviral drugs (ARVs) was substantially impaired in the presence of EPs. Epigallocatechin gallate (EGCG) could both inhibit the formation of fibrils composed of EPs and counteract the EP-mediated enhancement of HIV-1 infection. Our findings identify viral derived amyloid fibrils that hold potential for biochemical applications.Structured summary of protein interactionsEP1 and EP1 bind by fluorescence technology (View interaction)EP2 and EP2 bind by fluorescence technology (View interaction)EP3 and EP3 bind by fluorescence technology (View interaction)SEVI and SEVI bind by fluorescence technology (View interaction)EP1 and EP1 bind by transmission electron microscopy (View interaction)EP2 and EP2 bind by transmission electron microscopy (View interaction)EP3 and EP3 bind by transmission electron microscopy (View interaction)SEVI and SEVI bind by transmission electron microscopy (View interaction)     

Purification of HIV-1 wild-type protease and characterization of proteolytically inactive HIV-1 protease mutants by pepstatin A affinity chromatography

Recombinant wild-type protease of human immunodeficiency virus, type [(HIV-1) expressed in E. coli was purified by pepstatin A affinity chromatography. An 88-fold purification was achieved giving a protease preparation with a specific enzymatic activity of approximately 3700 pmol/min/μg. Two proteolytically inactive HIV-1 mutant proteases (Arg-87 → Lys; Asn-88 → Glu) were found to bind to pepstatin A agarose, and they were purified as the wild-type protease. A third mutant protease (Arg-87 → Glu) was apparently unable to bind to pepstatin A under similar conditions. Binding to pepstatin A indicates the binding ability of the substrate binding site and the ability to form dimers. These features may be used to purify and to characterize other mutated HIV-1 proteases.     

Toward a universal inhibitor of retroviral proteases: comparative analysis of the interactions of LP-130 complexed with proteases from HIV-1, FIV, and EIAV.

One of the major problems encountered in antiviral therapy against AIDS is the emergence of viral variants that exhibit drug resistance. The sequences of proteases (PRs) from related retroviruses sometimes include, at structurally equivalent positions, amino acids identical to those found in drug-resistant forms of HIV-1 PR. The statine-based inhibitor LP-130 was found to be a universal, nanomolar-range inhibitor against all tested retroviral PRs. We solved the crystal structures of LP-130 in complex with retroviral PRs from HIV-1, feline immunodeficiency virus, and equine infectious anemia virus and compared the structures to determine the differences in the interactions between the inhibitor and the active-site residues of the enzymes. This comparison shows an extraordinary similarity in the binding modes of the inhibitor molecules. The only exceptions are the different conformations of naphthylalanine side chains at the P3/P3' positions, which might be responsible for the variation in the Ki values. These findings indicate that successful inhibition of different retroviral PRs by LP-130 is achieved because this compound can be accommodated without serious conformational differences, despite the variations in the type of residues forming the active-site region. Although strong, specific interactions between the ligand and the enzyme might improve the potency of the inhibitor, the absence of such interactions seems to favor the universality of the compound. Hence, the ability of potential anti-AIDS drugs to inhibit multiple retroviral PRs might indicate their likelihood of not eliciting drug resistance. These studies may also contribute to the development of a small-animal model for preclinical testing of antiviral compounds.     

Systematic mutational analysis of the active-site threonine of HIV-1 proteinase: rethinking the "fireman's grip" hypothesis

Aspartic proteinases share a conserved network of hydrogen bonds (termed "fireman's grip"), which involves the hydroxyl groups of two threonine residues in the active site Asp-Thr-Gly triplets (Thr26 in the case of human immunodeficiency virus type 1 (HIV-1) PR). In the case of retroviral proteinases (PRs), which are active as symmetrical homodimers, these interactions occur at the dimer interface. For a systematic analysis of the "fireman's grip," Thr26 of HIV-1 PR was changed to either Ser, Cys, or Ala. The variant enzymes were tested for cleavage of HIV-1 derived peptide and polyprotein substrates. PR(T26S) and PR(T26C) showed similar or slightly reduced activity compared to wild-type HIV-1 PR, indicating that the sulfhydryl group of cysteine can substitute for the hydroxyl of the conserved threonine in this position. PR(T26A), which lacks the "fireman's grip" interaction, was virtually inactive and was monomeric in solution at conditions where wild-type PR exhibited a monomer-dimer equilibrium. All three mutations had little effect when introduced into only one chain of a linked dimer of HIV-1 PR. In this case, even changing both Thr residues to Ala yielded residual activity suggesting that the "fireman's grip" is not essential for activity but contributes significantly to dimer formation. Taken together, these results indicate that the "fireman's grip" is crucial for stabilization of the retroviral PR dimer and for overall stability of the enzyme.     

Crystal structure and chitin oligosaccharide-binding mode of a 'loopful' family GH19 chitinase from rye, Secale cereale, seeds

The substrate-binding mode of a 26-kDa GH19 chitinase from rye, Secale?cereale, seeds (RSC-c) was investigated by crystallography, site-directed mutagenesis and?NMR spectroscopy. The crystal structure of RSC-c in a complex with an N-acetylglucosamine tetramer, (GlcNAc)(4) , was successfully solved, and revealed the binding mode of the tetramer to be an aglycon-binding site, subsites +1, +2, +3, and +4. These are the first crystallographic data showing the oligosaccharide-binding mode of a family GH19 chitinase. From HPLC analysis of the enzymatic reaction products, mutation of Trp72 to alanine was found to affect the product distribution obtained from the substrate, p-nitrophenyl penta-N-acetyl-β-chitopentaoside. Mutational experiments confirmed the crystallographic finding that the Trp72 side chain interacts with the +4 moiety of the bound substrate. To further confirm the crystallographic data, binding experiments were also conducted in solution using NMR spectroscopy. Several signals in the (1) H-(15) N HSQC spectrum of the stable isotope-labeled RSC-c were affected upon addition of (GlcNAc)(4) . Signal assignments revealed that most signals responsive to the addition of (GlcNAc)(4) are derived from amino acids located at the surface of the aglycon-binding site. The binding mode deduced from NMR binding experiments in solution was consistent with that from the crystal structure. Database The atomic coordinates and structural factors have been deposited in the Protein Data Bank, under the accession codes 4DWX (unliganded form) and 4DYG ((GlcNAc)(4) complex). Chitinase, EC 3.2.1.14. Backbone assignment data were deposited in the Biological Magnetic Resonance Data Bank ( http://www.bmrb.wisc.edu/bmrb/) with the code number 11467 Structured digital abstract ? RSC-c?and?RSC-c?bind?by?x-ray crystallography?(View interaction).     

Structural evidence for effectiveness of darunavir and two related antiviral inhibitors against HIV-2 protease

No drug has been targeted specifically for HIV-2 (human immunodeficiency virus type 2) infection despite its increasing prevalence worldwide. The antiviral HIV-1 (human immunodeficiency virus type 1) protease (PR) inhibitor darunavir and the chemically related GRL98065 and GRL06579A were designed with the same chemical scaffold and different substituents at P2 and P2′ to optimize polar interactions for HIV-1 PR (PR1). These inhibitors are also effective antiviral agents for HIV-2-infected cells. Therefore, crystal structures of HIV-2 PR (PR2) complexes with the three inhibitors have been solved at 1.2-Å resolution to analyze the molecular basis for their antiviral potency. Unusually, the crystals were grown in imidazole and zinc acetate buffer, which formed interactions with the PR2 and the inhibitors. Overall, the structures were very similar to the corresponding inhibitor complexes of PR1 with an RMSD of 1.1 Å on main-chain atoms. Most hydrogen-bond and weaker C-H…O interactions with inhibitors were conserved in the PR2 and PR1 complexes, except for small changes in interactions with water or disordered side chains. Small differences were observed in the hydrophobic contacts for the darunavir complexes, in agreement with relative inhibition of the two PRs. These near-atomic-resolution crystal structures verify the inhibitor potency for PR1 and PR2 and will provide the basis for the development of antiviral inhibitors targeting PR2.     

Inhibitors of human immunodeficiency virus-1 protease.

We have shown that the interaction of pepstatin A with human immunodeficiency virus-1 protease (HIV-1 protease) can be characterized by a high-affinity mode (Ki = 478 +/- 27 nM), resulting in pure competitive inhibition of the hydrolytic activity of HIV-1 protease toward the fluorogenic substrate. Binding of pepstatin in this mode induces a blue shift in the endogenous fluorescence arising from the tryptophan residues in HIV-1 protease. This shift is maximal in the presence of 10 microM pepstatin. Haloperidol, in contrast, interacts with HIV-1 protease with weaker affinity (Ki = 19 +/- 1 microM) in a mode which results in pure noncompetitive inhibition of the hydrolytic activity of HIV-1 protease. Binding of haloperidol in this mode induces a red shift in the endogenous fluorescence arising from the tryptophan residues in HIV-1 protease. This shift is maximal in the presence of 200 microM haloperidol. Addition of both pepstatin and haloperidol at concentrations in the range of their Ki values results in additive inhibition of the hydrolytic activity of HIV-1 protease, as well as an additive effect on the tryptophan fluorescence of protease. However, at saturating concentrations of pepstatin and haloperidol, the effect of haloperidol was predominant, as measured by the changes in the intrinsic fluorescence of HIV-1 protease.     

Dynamics of Preferential Substrate Recognition in HIV-1 Protease: Redefining the Substrate Envelope

Human immunodeficiency virus type 1 (HIV-1) protease (PR) permits viral maturation by processing the gag and gag-pro-pol polyproteins. HIV-1 PR inhibitors (PIs) are used in combination antiviral therapy but the emergence of drug resistance has limited their efficacy. The rapid evolution of HIV-1 necessitates consideration of drug resistance in novel drug design. Drug-resistant HIV-1 PR variants no longer inhibited efficiently, continue to hydrolyze the natural viral substrates. Though highly diverse in sequence, the HIV-1 PR substrates bind in a conserved three-dimensional shape we termed the substrate envelope. Earlier, we showed that resistance mutations arise where PIs protrude beyond the substrate envelope, because these regions are crucial for drug binding but not for substrate recognition. We extend this model by considering the role of protein dynamics in the interaction of HIV-1 PR with its substrates. We simulated the molecular dynamics of seven PR-substrate complexes to estimate the conformational flexibility of the bound substrates. Interdependence of substrate-protease interactions might compensate for variations in cleavage-site sequences and explain how a diverse set of sequences are recognized as substrates by the same enzyme. This diversity might be essential for regulating sequential processing of substrates. We define a dynamic substrate envelope as a more accurate representation of PR-substrate interactions. This dynamic substrate envelope, described by a probability distribution function, is a powerful tool for drug design efforts targeting ensembles of resistant HIV-1 PR variants with the aim of developing drugs that are less susceptible to resistance.     

Comparison of the substrate specificity of the human T-cell leukemia virus and human immunodeficiency virus proteinases.

Human T-cell leukemia virus type-1 (HTLV-1) is associated with a number of human diseases. Based on the therapeutic success of human immunodeficiency virus type 1 (HIV-1) PR inhibitors, the proteinase (PR) of HTLV-1 is a potential target for chemotherapy. To facilitate the design of potent inhibitors, the subsite specificity of HTLV-1 PR was characterized and compared to that of HIV-1 PR. Two sets of substrates were used that contained single amino-acid substitutions in peptides representing naturally occurring cleavage sites in HIV-1 and HTLV-1. The original HIV-1 matrix/capsid cleavage site substrate and most of its substituted peptides were not hydrolyzed by the HTLV-1 enzyme, except for those with hydrophobic residues at the P4 and P2 positions. On the other hand, most of the peptides representing the HTLV-1 capsid/nucleocapsid cleavage site were substrates of both enzymes. A large difference in the specificity of HTLV-1 and HIV-1 proteinases was demonstrated by kinetic measurements, particularly with regard to the S4 and S2 subsites, whereas the S1 subsite appeared to be more conserved. A molecular model of the HTLV-1 PR in complex with this substrate was built, based on the crystal structure of the S9 mutant of Rous sarcoma virus PR, in order to understand the molecular basis of the enzyme specificity. Based on the kinetics of shortened analogs of the HTLV-1 substrate and on analysis of the modeled complex of HTLV-1 PR with substrate, the substrate binding site of the HTLV-1 PR appeared to be more extended than that of HIV-1 PR. Kinetic results also suggested that the cleavage site between the capsid and nucleocapsid protein of HTLV-1 is evolutionarily optimized for rapid hydrolysis.