Zinc ion effects on individual Ssp DnaE intein splicing steps: regulating pathway progression

Use of the naturally split, self-splicing Synechocystis sp. PCC6803 DnaE intein permits separate purification of the N- and C-terminal intein domains. Otherwise spontaneous intein-mediated reactions can therefore be controlled in vitro, allowing detailed study of intein kinetics. Incubation of the Ssp DnaE intein with ZnCl(2) inhibited trans splicing, hydrolysis-mediated N-terminal trans cleavage, and C-terminal trans cleavage reactions. Maximum inhibition of the splicing reaction was achieved at equal molar concentrations of ZnCl(2) and intein domains, suggesting a 1:1 metal ion:intein binding stoichiometry. Mutation of the (+)1 cysteine residue to valine (C(+)1V) alleviated the inhibitory effects of ZnCl(2). Valine substitution in the absence of ZnCl(2) blocked trans splicing and decreased C-terminal cleavage kinetics in a manner similar to that of the native (+)1 cysteine in the presence of ZnCl(2). These data are consistent with Zn(2+)-mediated inhibition of the Ssp DnaE intein via chelation of the (+)1 cysteine residue. N-Terminal trans cleavage can occur via both spontaneous hydrolysis and nucleophilic (e.g., DTT) attack. Comparative examination of N-terminal cleavage rates using amino acid substitution (C(+)1V) and Zn(2+)-mediated inhibition permitted the maximum contribution of hydrolysis to overall N-terminal cleavage kinetics to be determined. Stable intermediates consisting of the associated intein domains were detected by PAGE and provided evidence of a rapid C-terminal cleavage step. Acute control of the C-terminal reaction was achieved by the rapid reversal of Zn(2+)-mediated inhibition by EDTA. By inhibiting both the splicing pathway and spontaneous hydrolysis with Zn(2+), reactants can be diverted from the trans splicing to the trans cleavage pathway where DTT and EDTA can regulate N- and C-terminal cleavage, respectively.     

Alternative nucleophilic residues in intein catalysis of protein splicing

Protein-splicing inteins are widespread in nature and have found many applications in protein research and engineering. The mechanism of protein splicing typically requires a nucleophilic amino acid residue at both position 1 (first residue of intein) and position +1 (first residue after intein), however it was not clear whether or how the three different nucleophilic residues (Cys, Ser, and Thr) would work differently at these two positions. To use intein in a target protein of interest, one needs to choose an intein insertion site to have a nucleophilic residue at position +1, therefore it is desirable to know what nucleophilic residue(s) are preferred by different inteins. In this study we began with a statistical analysis of known inteins, which showed an unequal distribution of the three nucleophilic residues at positions 1 and +1, and then subjected six different mini-inteins to site-directed mutagenesis to systematically test the functionality of the three nucleophilic residues at the two positions. At position 1, most natural inteins had Cys and none had Thr. When the Cys at position 1 of the six inteins was mutated to Ser and Thr, the splicing activity was abolished in all except one case. At position +1, Cys and Ser were nearly equally abundant in natural inteins, and they were found to be functionally interchangeable in the six inteins of this study. When the two positions were studied as 1/+1 combination, the Cys/Ser combination was abundant in natural inteins, whereas the Ser/Cys combination was conspicuously absent. Similarly, all of the six inteins of this study spliced with the Cys/Ser combination, whereas none spliced with the Ser/Cys combination. These findings have interesting implications on the mechanism of splicing and the selection of intein insertion sites, and they also produced two rare mini-inteins that could splice with Thr at position +1.     

Protein splicing mechanisms and applications

Inteins are protein splicing elements that employ standard enzyme strategies to excise themselves from precursor proteins and ligate the surrounding sequences (exteins). The protein splicing pathway consists of four nucleophilic displacements directed by the intein plus the first C-extein residue. The intein active site(s) are formed by folding of the intein within the precursor, which brings together the splice junctions and internal intein residues that assist catalysis. Inteins with non-canonical catalytic residues splice by modified pathways. Understanding intein proteolytic cleavage and ligation activities has led to the development of many novel applications in the fields of protein engineering, enzymology, microarray production, target detection and activation of transgenes in plants. Recent advances include intein-mediated attachment of proteins to solid supports for microarray or western blot analysis, linking nucleic acids to proteins and controllable splicing, which converts inteins into molecular switches.     

Protein splicing and auto-cleavage of bacterial intein-like domains lacking a C'-flanking nucleophilic residue

Bacterial intein-like (BIL) domains are newly identified homologs of intein protein-splicing domains. The two known types of BIL domains together with inteins and hedgehog (Hog) auto-processing domains form the Hog/intein (HINT) superfamily. BIL domains are distinct from inteins and Hogs in sequence, phylogenetic distribution, and host protein type, but little is known about their biochemical activity. Here we experimentally study the auto-processing activity of four BIL domains. An A-type BIL domain from Clostridium thermocellum showed both protein-splicing and auto-cleavage activities. The splicing is notable, because this domain has a native Ala C'-flanking residue rather than a nucleophilic residue, which is absolutely necessary for intein protein splicing. B-type BIL domains from Rhodobacter sphaeroides and Rhodobacter capsulatus cleaved their N' or C' ends. We propose an alternative protein-splicing mechanism for the A-type BIL domains. After an initial N-S acyl shift, creating a thioester bond at the N' end of the domain, the C' end of the domain is cleaved by Asn cyclization. The resulting amino end of the C'-flank attacks the thioester bond next at the N' end of the domain. This aminolysis step splices the two flanks of the domain. The B-type BIL domain cleavage activity is explained in the context of the canonical intein protein-splicing mechanism. Our results suggest that the different HINT domains have related biochemical activities of proteolytic cleavages, ligation and splicing. Yet the predominant reactions diverged in each HINT type according to their specific biological roles. We suggest that the BIL domain cleavage and splicing reactions are mechanisms for post-translationally generating protein variability, particularly in extracellular bacterial proteins.     

Reactivity of the cysteine residues in the protein splicing active center of the Mycobacterium tuberculosis RecA intein

Protein splicing involves the self-catalyzed excision of an intervening polypeptide segment, an intein, from a precursor protein. The first two steps in the protein splicing process lead to the formation of ester intermediates through nucleophilic attacks by the side chains of cysteine, serine, or threonine residues adjacent to the splice junctions. Since both nucleophilic residues in the Mycobacterium tuberculosis RecA intein are cysteine, their reactivities could be compared by sulfhydryl group titration. This was accomplished by using fusion proteins containing a truncated RecA intein modified by mutation to prevent protein splicing, in which the cysteines at the splice junctions were the only sulfhydryl groups. The ability to undergo hydroxylamine-induced cleavage at the upstream splice junction showed that the modified intein was not impaired in the ability to form ester intermediates. Sulfhydryl titration with iodoacetamide, monitored by quantitating the residual thiols after reaction with a maleimide derivative of biotin, revealed a striking difference in the apparent pK(a) values of the cysteines at the two splice junctions. The apparent pK(a) of the cysteine at the upstream splice junction, which initiates the N-S acyl rearrangement leading to the linear ester intermediate, was approximately 8.2, whereas that of the cysteine residue at the downstream splice junction, which initiates the transesterification reaction converting the linear ester to the branched ester intermediate, was about 5.8. This suggests that the transesterification step is facilitated by an unusually low pK(a) of the attacking thiol group. Comparison of the rates of cleavage of the linear ester intermediates derived from the M. tuberculosis RecA and the Saccharomyces cerevisiae VMA inteins by dithiothreitol and hydroxylamine revealed that the former reacted relatively more slowly with dithiothreitol, suggesting that the RecA intein has diverged in the course of evolution to react preferentially with thiolate anions and thus lacks the basic groups that may facilitate nucleophilic attack by thiols in other inteins.     

Protein splicing of the three Pyrococcus abyssi ribonucleotide reductase inteins

An intein is a polypeptide that interrupts the functional domains of a protein, called the exteins. The intein can facilitate its own excision from the exteins, concomitant with the ligation of the exteins, in a process called protein splicing. The alpha subunit of the ribonucleotide reductase of the extreme thermophile Pyrococcus abyssi is interrupted by three inteins in separate insertion sites. Each intein can facilitate protein splicing when over-expressed in Escherichia coli, with affinity domains serving as the exteins. The influence of the N-terminal flanking residue on the efficiency of splicing is specific to each intein. Each intein has a different downstream nucleophilic residue, and cannot tolerate substitution to a residue of lesser or equal nucleophilicity. The influence of the conserved penultimate His also differs between the inteins.     

Characteristics of protein splicing in trans mediated by a semisynthetic split intein

Protein splicing in trans results in the ligation of two protein or peptide segments linked to appropriate intein fragments. We have characterized the trans-splicing reaction mediated by a naturally expressed, approximately 100-residue N-terminal fragment of the Mycobacterium tuberculosis intein and a synthetic peptide containing the 38 C-terminal intein residues, and found that the splicing reaction was very versatile and robust. The efficiency of splicing was nearly independent of temperature between 4 and 37 degrees C and pH between 6.0 and 7.5, with only a slight decline at pH values as high as 8.5. In addition, there was considerable flexibility in the choice of the C-terminal intein fragment, no significant difference in protein ligation efficiency being observed between reactions utilizing the N-terminal fragment and either the naturally expressed 107-residue C-terminal portion of the intein, much smaller synthetic peptides, or the 107-residue C-terminal intein fragment modified by fusion of a maltose binding protein domain to its N-terminus. The ability to use different types of the C-terminal intein fragments and a broad range of reaction conditions make protein splicing in trans a versatile tool for protein ligation.     

Mechanism of protein splicing of the Pyrococcus abyssi lon protease intein

Protein splicing is a post-translational process by which an intervening polypeptide, the intein, excises itself from the flanking polypeptides, the exteins, coupled to ligation of the exteins. The lon protease of Pyrococcus abyssi (Pab) is interrupted by an intein. When over-expressed as a fusion protein in Escherichia coli, the Pab lon protease intein can promote efficient protein splicing. Mutations that block individual steps of splicing generally do not lead to unproductive side reactions, suggesting that the intein tightly coordinates the splicing process. The intein can splice, although it has Lys in place of the highly conserved penultimate His, and mutants of the intein in the C-terminal region lead to the accumulation of stable branched-ester intermediate.     

Crystal structure of a mini-intein reveals a conserved catalytic module involved in side chain cyclization of asparagine during protein splicing

We have determined the crystal structure of a 154-residue intein derived from the dnaB gene of Synechocystis sp. strain PCC6803 and refined it to a 2.0-A resolution. The x-ray structure suggests that this intein possesses two catalytic sites that appear to be separately responsible for splicing and cleavage of the N- and C-terminal scissile bonds. The conserved intein block F residues are the important components of a catalytic site for side chain cyclization of the last intein residue, Asn-154. The data suggest that the imidazole ring of His-143 is involved in the activation of the side chain Ndelta atom of Asn-154, leading to a nucleophilic attack on the carbonyl carbon of Asn-154. Substitution of His-143 with Ala or Gln resulted in the inhibition of C-terminal cleavage. His-153, Asp-136, and a water molecule appear to constitute an oxyanion binding site by contacting the carbonyl oxygen of Asn-154 to stabilize the transition state. The structure and mutagenesis data also support that the close contact between the hydroxyl groups of Thr-138 and Ser-155, whose side chain participates in an S --> O acyl shift, plays an important role in the nucleophile orientation. Our structural modeling suggests that this catalytic module is conserved in the C-terminal subdomains of inteins from diverse organisms.     

Study of protein splicing and intein-mediated peptide bond cleavage under high-cell-density conditions

Protein splicing elements (inteins), capable of catalyzing controllable peptide bond cleavage reactions, have been used to separate recombinant proteins from affinity tags during affinity purification. Since the inteins eliminate the use of a protease in the recovery process, the intein-mediated purification system has the potential to significantly reduce recovery costs for the industrial production of recombinant proteins. Thus far, the intein system has only been examined and utilized for expression and purification of recombinant proteins at the laboratory scale for cells cultivated at low cell densities. In this study, protein splicing and in vitro cleavage of intein fusion proteins expressed in high-cell-density fed-batch fermentations of recombinant Escherichia coli were examined. Three model intein fusion constructs were used to examine the stability and splicing/cleavage activities of the fusion proteins produced under high-cell-density conditions. The data indicated that the intein fusion protein containing the wild-type intein catalyzed efficient in vivo protein splicing during high-cell-density cultivation. Also, the intein fusion proteins containing modified inteins catalyzed efficient thiol-induced in vitro cleavage reactions. The results of this study demonstrated the potential feasibility of using the intein-mediated protein purification system for industrial-scale production of recombinant proteins.     

Crystal structures of an intein from the split dnaE gene of Synechocystis sp. PCC6803 reveal the catalytic model without the penultimate histidine and the mechanism of zinc ion inhibition of protein splicing

The first naturally occurring split intein was found in the dnaE gene of Synechocystis sp. PCC6803 and belongs to a subclass of inteins without a penultimate histidine residue. We describe two high-resolution crystal structures, one derived from an excised Ssp DnaE intein and the second from a splicing-deficient precursor protein. The X-ray structures indicate that His147 in the conserved block F activates the side-chain N(delta) atom of the intein C-terminal Asn159, leading to a nucleophilic attack on the peptide bond carbonyl carbon atom at the C-terminal splice site. In this process, Arg73 appears to stabilize the transition state by interacting with the carbonyl oxygen atom of the scissile bond. Arg73 also seems to substitute for the conserved penultimate histidine residue in the formation of an oxyanion hole, as previously identified in other inteins. The finding that the precursor structure contains a zinc ion chelating the highly conserved Cys160 and Asp140 reveals the structural basis of Zn2+-mediated inhibition of protein splicing. Furthermore, it is of interest to observe that the carbonyl carbon atom of Asn159 and N(eta) of Arg73 are 2.6 angstroms apart in the free intein structure and 10.6 angstroms apart in the precursor structure. The orientation change of the aromatic ring of Tyr-1 following the initial acyl shift may be a key switching event contributing to the alignment of Arg73 and the C-terminal scissile bond, and may explain the sequential reaction property of the Ssp DnaE intein.     

Split dnaE genes encoding multiple novel inteins in Trichodesmium erythraeum

Three inteins were found when analyzing a pair of split dnaE genes encoding the catalytic subunit of DNA polymerase III in the oceanic N2-fixing cyanobacterium Trichodesmium erythraeum. The three inteins (DnaE-1, DnaE-2, and DnaE-3) were clustered in a 70-amino acid (aa) region of the predicted DnaE protein. The DnaE-1 intein is 1258 aa long and three times as large as a typical intein, due to the presence of large tandem repeats in which a 57-aa sequence is repeated 17 times. The DnaE-2 intein has a more typical size of 428 aa with putative protein splicing and endonuclease domains. The DnaE-3 intein is a split intein consisting of a 102-aa N-terminal part and a 36-aa C-terminal part encoded on the first and second split dnaE genes, respectively. Synthesis of a mature DnaE protein is predicted to involve expression of two split dnaE genes followed by two protein cis-splicing reactions and one protein trans-splicing reaction. Tandem repeats in the DnaE-1 intein inhibited the protein splicing activity of this intein when tested in Escherichia coli cells and may potentially regulate DnaE synthesis in vivo.     

Expression of antibodies using single‐open reading frame vector design and polyprotein processing from mammalian cells

We describe a novel polyprotein precursor‐based approach to express antibodies from mammalian cells. Rather than expressing heavy and light chain proteins from separate expression units, the antibody heavy and light chains are contained in one single‐open reading frame (sORF) separated by an intein gene fused in frame. Inside mammalian cells this ORF is transcribed into a single mRNA, and translated into one polypeptide. The antibody heavy and light chains are separated posttranslationally, assembled into the functional antibody molecule, and secreted into culture medium. It is demonstrated that Pol I intein from P. horikoshii mediates protein splicing and cleavage reactions in mammalian cells, in the context of antibody heavy and light chain amino acid sequences. To allow the separation of antibody heavy chain, light chain, and the intein, we investigated a number of intein mutations designed to inhibit intein‐mediated splicing but preserve cleavage reactions. We have also designed constructs in which the signal peptide downstream from intein has altered hydrophobicity. The use of some of these mutant constructs resulted in more efficient antibody secretion, highlighting areas that can be further explored in improving such an expression system. An antibody secreted using one of the sORF constructs was characterized. This antibody has correct N‐terminal sequences for both of its heavy and light chains, correct heavy and light chain MW as well as intact MW as measured by mass spectrometry. Its affinity to antigen, as measured by surface plasmon resonance (SPR), is indistinguishable from that of the same antibody produced using conventional method. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Unprecedented rates and efficiencies revealed for new natural split inteins from metagenomic sources

Inteins excise themselves out of precursor proteins by the protein splicing reaction and have emerged as valuable protein engineering tools in numerous and diverse biotechnological applications. Split inteins have recently attracted particular interest because of the opportunities associated with generating a protein from two separate polypeptides and with trans-cleavage applications made possible by split intein mutants. However, natural split inteins are rare and differ greatly in their usefulness with regard to the achievable rates and yields. Here we report the first functional characterization of new split inteins previously identified by bioinformatics from metagenomic sources. The N- and C-terminal fragments of the four inteins gp41-1, gp41-8, NrdJ-1, and IMPDH-1 were prepared as fusion constructs with model proteins. Upon incubation of complementary pairs, we observed trans-splicing reactions with unprecedented rates and yields for all four inteins. Furthermore, no side reactions were detectable, and the precursor constructs were consumed virtually quantitatively. The rate for the gp41-1 intein, the most active intein on all accounts, was k = 1.8 ± 0.5 × 10(-1) s(-1), which is ～10-fold faster than the rate reported for the Npu DnaE intein and gives rise to completed reactions within 20-30 s. No cross-reactivity in exogenous combinations was observed. Using C1A mutants, all inteins were efficient in the C-terminal cleavage reaction, albeit at lower rates. C-terminal cleavage could be performed under a wide range of reaction conditions and also in the absence of native extein residues flanking the intein. Thus, these inteins hold great potential for splicing and cleavage applications.     

Characterization of a naturally occurring trans-splicing intein from Synechocystis sp. PCC6803

A naturally occurring trans-splicing intein from the dnaE gene of Synechocystis sp. PCC6803 (Ssp DnaE intein) was used to characterize the intein-catalyzed splicing reaction. Trans-splicing/cleavage reactions were initiated by combining the N-terminal splicing domain of the Ssp DnaE intein containing five native N-extein residues and maltose binding protein as the N-extein with the C-terminal Ssp DnaE intein splicing domain (E(C)) with or without thioredoxin fused in-frame to its carboxy terminus. Observed rate constants (k(obs)) for dithiothreitol-induced N-terminal cleavage, C-terminal cleavage, and trans-splicing were (1.0 +/- 0.5) x 10(-3), (1.9 +/- 0.9) x 10(-4), and (6.6 +/- 1.3) x 10(-5) s(-1), respectively. Preincubation of the intein fragments showed no change in k(obs), indicating association of the two splicing domains is rapid relative to the subsequent steps. Interestingly, when E(C) concentrations were substoichiometric with respect to the N-terminal splicing domain, the levels of N-terminal cleavage were equivalent to the amount of E(C), even over a 24 h period. Activation energies for N-terminal cleavage and trans-splicing were determined by Arrhenius plots to be 12.5 and 8.9 kcal/mol, respectively. Trans-splicing occurred maximally at pH 7.0, while a slight increase in the extent of N-terminal cleavage was observed at higher pH values. This work describes an in-depth kinetic analysis of the splicing and cleavage activity of an intein, and provides insight for the use of the split intein as an affinity domain.     

蛋白质剪切及其应用

蛋白质剪切是一种翻译后修饰事件 ,它将插入前体蛋白的中间的蛋白质肽段 (Intein ,internalproteinfrag ment)剪切出来 ,并用正常肽键将两侧蛋白质多肽链 (Extein ,flankingproteinfragments)连接起来。在此过程中不需要辅酶或辅助因子的作用 ,仅需四步分子内反应。Intein及其侧翼序列可以通过突变产生高度特异性的自我切割用于蛋白质纯化、蛋白质连接和蛋白质环化反应 ,在蛋白质工程方面有广泛的应用前景。     

Protein-splicing reaction via a thiazolidine intermediate: crystal structure of the VMA1-derived endonuclease bearing the N and C-terminal propeptides

Protein splicing excises an internal intein segment from a protein precursor precisely, and concomitantly ligates flanking N and C-extein polypeptides at the respective sides of the precursor. Here, a series of precursor recombinants bearing 11 N-extein and ten C-extein residues is prepared for the intein of the Saccharomyces cerevisiae VMA1-derived homing endonuclease referred to as VDE and as PI-SceI. The recombinant with replacements of C284S, H362N, N737S, and C738S is chosen as a spliceable precursor model and is then subjected to a 2.1A resolution crystallographic analysis. The crystal structure shows that the introduced extein polypeptides are located in the vicinity of the splicing site, and that each of their peptide bonds is in the trans conformation. The S284 O(gamma) atom located at a distance of 3.1A from the G283 C atom in the N-terminal junction suggests that a nucleophilic attack of the C284 S(gamma) atom on the G283 C atom forms a tetrahedral intermediate containing a five-membered thiazolidine ring. The tetrahedral intermediate is supposedly resolved into a thioester acyl group upon the cleavage of the linkage between the G283 C and C284 N atoms, and this thioester acyl formation completes the initial steps of Nright arrowS acyl shift at the junction between the N-extein and intein. The S738 O(gamma) atom in the C-terminal junction is placed in close proximity to the S284 O(gamma) atom at a distance of 3.6A, and is well suited for another nucleophilic attack on the resultant thioester acyl group that is then subjected to the transesterification in the next step. The reaction steps proposed for the acyl shift are driven entirely by protonation and deprotonation, in which proton ingress and egress is balanced within the splicing site.     

Branched intermediate formation is the slowest step in the protein splicing reaction of the Ala1 KlbA intein from Methanococcus jannaschii

We report the first detailed investigation of the kinetics of protein splicing by the Methanococcus jannaschii KlbA (Mja KlbA) intein. This intein has an N-terminal Ala in place of the nucleophilic Cys or Ser residue that normally initiates splicing but nevertheless splices efficiently in vivo [Southworth, M. W., Benner, J., and Perler, F. B. (2000) EMBO J.19, 5019-5026]. To date, the spontaneous nature of the cis splicing reaction has hindered its examination in vitro. For this reason, we constructed an Mja KlbA intein-mini-extein precursor using intein-mediated protein ligation and engineered a disulfide redox switch that permits initiation of the splicing reaction by the addition of a reducing agent such as dithiothreitol (DTT). A fluorescent tag at the C-terminus of the C-extein permits monitoring of the progress of the reaction. Kinetic analysis of the splicing reaction of the wild-type precursor (with no substitutions in known nucleophiles or assisting groups) at various DTT concentrations shows that formation of the branched intermediate from the precursor is reversible (forward rate constant of 1.5 × 10(-3) s(-1) and reverse rate constant of 1.7 × 10(-5) s(-1) at 42 °C), whereas the productive decay of this intermediate to form the ligated exteins is faster and occurs with a rate constant of 2.2 × 10(-3) s(-1). This finding conflicts with reports about standard inteins, for which Asn cyclization has been assigned as the rate-determining step of the splicing reaction. Despite being the slowest step of the reaction, branched intermediate formation in the Mja KlbA intein is efficient in comparison with those of other intein systems. Interestingly, it also appears that this intermediate is protected against thiolysis by DTT, in contrast to other inteins. Evidence is presented in support of a tight coupling between the N-terminal and C-terminal cleavage steps, despite the fact that the C-terminal single-cleavage reaction occurs in variant Mja KlbA inteins in the absence of N-terminal cleavage. We posit that the splicing events in the Mja KlbA system are tightly coordinated by a network of intra- and interdomain noncovalent interactions, rendering its function particularly sensitive to minor disruptions in the intein or extein environments.     

The Thermococcus kodakaraensis Tko CDC21-1 intein activates its N-terminal splice junction in the absence of a conserved histidine by a compensatory mechanism

Inteins and other self-catalytic enzymes, such as glycosylasparaginases and hedgehog precursors, initiate autocleavage by converting a peptide bond to a (thio)ester bond when Ser, Thr, or Cys undergoes an N-[S/O] acyl migration assisted by residues within the precursor. Previous studies have shown that a His at position 10 in intein Block B is essential for this initial acyl migration and N-terminal splice junction cleavage. This His is present in all inteins identified to date except the Thermococcus kodakaraensis Tko CDC21-1 intein orthologs and the inactive Arthrobacter species FB24 Arth_1007 intein. This study demonstrates that the Tko CDC21-1 intein is fully active and has replaced the lost catalytic function normally provided by the Block B His using a compensatory mechanism involving a conserved ortholog-specific basic residue (Lys(58)) present outside the standard intein conserved motifs. We propose that Lys(58) catalyzes the initial N-S acyl migration by stabilizing the thiazolidine-tetrahedral intermediate, allowing it to be resolved by water-mediated hydrolysis rather than by protonating the leaving group as His is theorized to do in many other inteins. Autoprocessing enzymes may have more flexibility in evolving catalytic variations because high reaction rates are not required when performing single-turnover reactions on "substrates" that are covalently attached to the enzyme. Consequently, inteins have more flexibility to sample catalytic mechanisms, providing insight into various strategies that enzymes use to accomplish catalysis.     

Inteins, valuable genetic elements in molecular biology and biotechnology

Inteins are internal protein elements that self-excise from their host protein and catalyze ligation of the flanking sequences (exteins) with a peptide bond. They are found in organisms in all three domains of life, and in viral proteins. Intein excision is a posttranslational process that does not require auxiliary enzymes or cofactors. This self-excision process is called protein splicing, by analogy to the splicing of RNA introns from pre-mRNA. Protein splicing involves only four intramolecular reactions, and a small number of key catalytic residues in the intein and exteins. Protein-splicing can also occur in trans. In this case, the intein is separated into N- and C-terminal domains, which are synthesized as separate components, each joined to an extein. The intein domains reassemble and link the joined exteins into a single functional protein. Understanding the cis- and trans-protein splicing mechanisms led to the development of intein-mediated protein-engineering applications, such as protein purification, ligation, cyclization, and selenoprotein production. This review summarizes the catalytic activities and structures of inteins, and focuses on the advantages of some recent intein applications in molecular biology and biotechnology.