共查询到20条相似文献,搜索用时 15 毫秒
1.
The main factors that affect the large specific surface area (SSA) of the activated carbon from agricultural waste corn cobs were studied by chemically activated method with solution of KOH and soap which acted as surfactant. The experiment showed that not only the activation temperature, activation time and the mass ratio of KOH to the carbonized material, but also the activated methods using activator obviously influenced the SSA of activated carbon. The experimental operating conditions were as follows: the carbonized temperature being 450 degrees C and keeping time being 4 h using N2 as protective gas; the activation temperature being 850 degrees C and holding time being 1.2 h; the mass ratio of KOH to carbonized material being 4.0; the time of soaking carbonized material in the solution of KOH and soap being 30 min. Under the optimal conditions, the SSA of activated carbon from corn cobs reached 2700 m2/g. And the addition of the soap as surfactant may shorten the soaking time. The structure of the activated carbon prepared had narrow distribution of pore size and the micro-pores accounted for 78%. The advantages of the method described were easy and feasible. 相似文献
2.
Generalized Mechanochemical Synthesis of Biomass‐Derived Sustainable Carbons for High Performance CO2 Storage
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Novel mechanochemical activation generates biomass‐derived carbons with unprecedented CO2 storage capacity due to higher porosity than analogous conventionally activated carbons but similar pore size. The mechanochemical activation, or so‐called compactivation, process involves compression, at 740 MPa, of mixtures of activating agent (KOH) and biomass hydrochar into pellets/disks prior to thermal activation. Despite the increase in surface area and pore volume of between 25% and 75% compared to conventionally activated carbons, virtually all of the porosity of the biomass (sawdust and lignin) derived mechanochemically activated carbons is from small micropores (5.8–6.5 Å), which results in a dramatic increase in CO2 storage capacity at 25 °C and low pressure (≤1 bar). The ambient temperature CO2 uptake for a carbon derived from sawdust at 600 °C and a KOH/carbon ratio of 2, rises from 1.3 to 2.0 mmol g?1 at 0.15 bar, and from 4.3 to 5.8 mmol g?1 at 1 bar, which is the highest ever reported for carbonaceous materials. The mechanochemically activated carbons have a superior CO2 working capacity for pressure swing adsorption and vacuum swing adsorption processes and, due to a high packing density, they exhibit excellent volumetric CO2 uptake that is higher than for any material reported to date. 相似文献
3.
N. M. Mikova N. V. Chesnokov E. V. Mazurova N. I. Pavlenko N. M. Ivanchenko 《Russian Journal of Bioorganic Chemistry》2016,42(7):741-747
Carbonization of betulin (betulinol) as an individual carbon precursor was studied in the temperature range of 400–800°C in the presence of KOH. Differential thermal analysis and IR spectroscopy were used to determine the influence of KOH on major structural changes and the chemical composition of betulin, which occur at 400–500°C. It was shown by scanning electron microscopy and BET analysis that KOH promoted the formation of a developed specific surface (SBET 1350–2100 m2/g) at temperatures of 600–800°C and had the greatest influence on the textural and adsorption properties of the resulting porous carbon adsorbents. It has been found that the formation of microporous carbon materials with a pore size of 1.92 nm and a specific micropore surface area of 1275 m2/g is possible upon the activation of betulin with KOH at 800°C. Betulin may be proposed to control the porosity of the carbon carriers derived from birch wood. 相似文献
4.
Utilization of rice husks as a feedstock for preparation of activated carbon by microwave induced KOH and K2CO3 activation 总被引:1,自引:0,他引:1
Rice husk (RH), an abundant by-product of rice milling, was used for the preparation of activated carbon (RHAC) via KOH and K(2)CO(3) chemical activation. The activation process was performed at the microwave input power of 600 W for 7 min. RHACs were characterized by low temperature nitrogen adsorption/desorption, scanning electron microscopy and Fourier transform infrared spectroscopy. The adsorption behavior was examined using methylene blue as adsorbate. The K(2)CO(3)-activated sample showed higher yield and better pore structures and adsorption capacity development than the KOH-activated sample, with a BET surface area, total pore volume and monolayer adsorption capacity of 1165 m(2)/g, 0.78 cm(3)/g and 441.52 mg/g, respectively. The results revealed the feasibility of microwave heating for preparation of high surface area activated carbons from rice husks via K(2)CO(3) activation. 相似文献
5.
Activated carbon was prepared from an inexpensive and renewable carbon source, Typha orientalis, by H(3)PO(4) activation and then impregnated with different Mn salts and tested for its Neutral Red (NR) adsorption capacities. The amount of Mn impregnated in the activated carbon was influenced by the anion species. Impregnation with Mn decreased the surface area, changed the pore size and crystal structure, and introduced more acidic functional groups such as carboxyl, lactone and phenol groups. The optimum adsorption performance for all the activated carbons was obtained at pH 3.7, Mn-Carbon dose of 0.100g/100ml solution and contact time 4.5h. The adsorption isotherms fit the Langmuir isotherm equation. The kinetic data followed the pseudo-second-order model. The thermodynamic parameters indicated that the processes were spontaneous and endothermic. According to these results, the prepared Mn modified activated carbons are promising adsorbents for the removal of Neutral Red from wastewater. 相似文献
6.
Xiao LiWei Xing Shuping Zhuo Jin ZhouFeng Li Shi-Zhang QiaoGao-Qing Lu 《Bioresource technology》2011,102(2):1118-1123
Series of nanoporous carbons are prepared from sunflower seed shell (SSS) by two different strategies and used as electrode material for electrochemical double-layer capacitor (EDLC). The surface area and pore-structure of the nanoporous carbons are characterized intensively using N2 adsorption technique. The results show that the pore-structure of the carbons is closely related to activation temperature and dosage of KOH. Electrochemical measurements show that the carbons made by impregnation-activation process have better capacitive behavior and higher capacitance retention ratio at high drain current than the carbons made by carbonization-activation process, which is due to that there are abundant macroscopic pores and less interior micropore surface in the texture of the former. More importantly, the capacitive performances of these carbons are much better than ordered mesoporous carbons and commercial wood-based active carbon, thus highlighting the success of preparing high performance electrode material for EDLC from SSS. 相似文献
7.
Sulfur‐Impregnated,Sandwich‐Type,Hybrid Carbon Nanosheets with Hierarchical Porous Structure for High‐Performance Lithium‐Sulfur Batteries
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Xi'an Chen Zhubing Xiao Xutao Ning Zheng Liu Zhi Yang Chao Zou Shun Wang Xiaohua Chen Ying Chen Shaoming Huang 《Liver Transplantation》2014,4(13)
Sandwich‐type hybrid carbon nanosheets (SCNMM) consisting of graphene and micro/mesoporous carbon layer are fabricated via a double template method using graphene oxide as the shape‐directing agent and SiO2 nanoparticles as the mesoporous guide. The polypyrrole synthesized in situ on the graphene oxide sheets is used as a carbon precursor. The micro/mesoporous strcutures of the SCNMM are created by a carbonization process followed by HF solution etching and KOH treatment. Sulfur is impregnated into the hybrid carbon nanosheets to generate S@SCNMM composites for the cathode materials in Li‐S secondary batteries. The microstructures and electrochemical performance of the as‐prepared samples are investigated in detail. The hybrid carbon nanosheets, which have a thickness of about 10–25 nm, high surface area of 1588 m2 g?1, and broad pore size distribution of 0.8–6.0 nm, are highly interconnected to form a 3D hierarchical structure. The S@SCNMM sample with the sulfur content of 74 wt% exhibits excellent electrochemical performance, including large reversible capacity, good cycling stability and coulombic efficiency, and good rate capability, which is believed to be due to the structure of hybrid carbon materials with hierarchical porous structure, which have large specific surface area and pore volume. 相似文献
8.
9.
Olive husk was used for the preparation of activated carbon by chemical activation with KOH. The effects of carbonization and activation time on carbon properties were evaluated. The surface area of the produced carbons was measured by means of N(2) adsorption at 77K. The carbons with the highest surface area were further characterized by means of elemental analysis, particle size measurement, Boehm titration, zeta potential measurement, and temperature programmed desorption (TPD). Subsequently they were used for adsorption of a mixture of polyphenols consisting of caffeic acid, vanillin, vanillic acid, pi-hydroxybenzoic acid and gallic acid at two temperatures, and their adsorptive capacity was compared to a commercial carbon Acticarbon CX and found to be higher enough. The role of the porosity and surface groups are discussed in relation to the adsorption forces and the properties of the adsorbed substances. A thermodynamic interpretation of the results is also attempted. 相似文献
10.
Because of its remarkably high theoretical capacity and favorable redox voltage (?2.71 V vs the standard hydrogen electrode), Na is a promising anode material for Na ion batteries. In this study, macroporous catalytic carbon nanotemplates (MC‐CNTs) based on nanoweb‐structured carbon nanofibers with various carbon microstructures are prepared from microbe‐derived cellulose via simple heating at 800 or 2400 °C. MC‐CNTs prepared at 800 °C have amorphous carbon structures with numerous topological defects, and exhibit a lower voltage overpotential of ≈8 mV in galvanostatic charge/discharge testing. In addition, MC‐CNT‐800s exhibit high Coulombic efficiencies of 99.4–99.9% during consecutive cycling at current densities ranging from 0.2 to 4 mA cm?2. However, the carbon structures of MC‐CNTs prepared at 800 °C are gradually damaged by cycling. This results in significant capacity losses after about 200 cycles. In contrast, MC‐CNTs prepared at 2400 °C exhibit well‐developed graphitic structures, and maintain predominantly stable cycling behaviors over 1000 cycles with Coulombic efficiencies of ≈99.9%. This study demonstrates the superiority of catalytic carbon nanotemplates with well‐defined pore structures and graphitic microstructures for use in Na metal anodes. 相似文献
11.
Physicochemical properties of carbons prepared from pecan shell by phosphoric acid activation 总被引:5,自引:0,他引:5
Activated carbons were prepared from pecan shell by phosphoric acid activation. The pore structure and acidic surface groups of these carbons were characterized by nitrogen adsorption, Boehm titration and transmittance Fourier infrared spectroscopy (FTIR) techniques. The characterization results demonstrated that the development of pore structure was apparent at temperatures 250 degrees C, and reached 1130m(2)/g and 0.34cm(3)/g, respectively, at 500 degrees C. Impregnation ratio and soaking time at activation temperature also affected the pore development and pore size distribution of final carbon products. At an impregnation ratio of 1.5, activated carbon with BET surface area and micropore volume as high as 861m(2)/g and 0.289cm(3)/g was obtained at 400 degrees C. Microporous activated carbons were obtained in this study. Low impregnation ratio (less than 1.5) and activation temperature (less than 300 degrees C) are favorable to the formation of acidic surface functional groups, which consist of temperature-sensitive (unstable at high temperature) and temperature-insensitive (stable at high temperature) two parts. The disappearance of temperature-sensitive groups was significant at temperature 300 degrees C; while the temperature-insensitive groups are stable even at 500 degrees C. FTIR results showed that the temperature-insensitive part was mostly phosphorus-containing groups as well as some carbonyl-containing groups, while carbonyl-containing groups were the main contributor of temperature-sensitive part. 相似文献
12.
In this study, sandwich-structured graphene/mesoporous silica composites (C8-modified graphene@mSiO(2) ) were synthesized by coating mesoporous silica onto hydrophilic graphene nanosheets through a surfactant-mediated cocondensation sol-gel process. The newly prepared C8-modified graphene@mSiO(2) nanocomposites possess unique properties of extended plate-like morphology, good water dispersibility, highly open pore structure, uniform pore size (2.8 nm), high surface area (632 m(2) /g), and C8-modified-interior pore walls. The unique structure of the C8-modified graphene@mSiO(2) composite nanosheets not only provide extended planes with hydrophilic surface that prevents aggregation in solution, but also offer a huge number of C8-modified mesopores with high surface area that can ensure an efficient adsorption of peptides through hydrophobic-hydrophobic interaction between C8-moified pore walls and target molecules. The obtained C8-modified graphene@mSiO(2) materials were utilized for size selectively and specifically enriching peptides in standard peptide mixtures and endogenous peptides in real biological samples (mouse brain tissue). 相似文献
13.
A macroporous poly(glycidyl methacrylate-triallyl isocyanurate-divinylbenzene) resin was synthesized and modified with diethylamine to yield an anion-exchange resin suitable for protein adsorption. Efforts were made to enhance protein ion exchange capacity of the resin by investigating the copolymer composition. Different synthesis recipes were attempted, and the resultant resins were characterized by measuring the specific surface area and the adsorption ability using bovine serum albumin (BSA) as a model protein. The intraparticle pore size distribution measured by mercury porosimetry showed that the pores in the range of 40-120 nm took 75% of the total pore volume, indicating that the ion exchanger was favorable for protein adsorption. BSA capacity obtained with an appropriate recipe was as high as 78.6 mg/g wet resin or 50 mg/mL packed volume, which was higher than the capacities of some commercially available ion exchangers. Moreover, by using a pore diffusion model, the effective pore diffusivity of BSA was found to be 5.5 x 10(-12) m(2)/s, similar to those in the commercial ion exchangers. 相似文献
14.
采用试剂y-氯丙基三乙氧基硅烷(cvrEs)对介孔硅材料SBA-15进行表面改性,并通过红外图谱(FT-IR)和N2吸附脱附等温图(BET)对其进行表征。结果表明:改性前原材料的比表面积为460.9m2/g,改性后材料比表面积提高到512.0m2/g。利用改性前和改性后的SBA-15对猪胰脂肪酶进行固载实验,并对实验结果进行比较,发现改性后的SBA-15在脂肪酶活性、pH环境适应性、热耐受性和可操作性都优于改性前的SBA-15,在最优条件下的酶活力提高超过60%。 相似文献
15.
Preparation and characterization of activated carbon produced from rice straw by (NH4)2HPO4 activation 总被引:2,自引:0,他引:2
Effects of different pretreatment protocols in (NH(4))(2)HPO(4) activation of rice straw on porous activated carbon evolution were evaluated. The pore structure, morphology and surface chemistry of obtained activated carbons were investigated by nitrogen adsorption, scanning electron microscopy and Fourier transform infrared spectroscopy. It was found that pretreatment combining impregnation with (NH(4))(2)HPO(4) and preoxidation could significantly affect the physicochemical properties of prepared activated carbons. The apparent surface area and total pore volume as high as 1154 m(2)/g and 0.670 cm(3)/g were obtained respectively, when combined process of impregnation followed by preoxidation at 200°C and activation at 700°C was carried out. Meanwhile, the activated carbon yield and maximum methylene blue adsorption capacity up to 41.14% and 129.5 mg/g were achieved, respectively. The results exhibited that (NH(4))(2)HPO(4) could be an effective activating agent for producing activated carbons from rice straw. 相似文献
16.
Mesoporous silica particles for immobilization of lipase from Candida rugosa were prepared by precipitation and aggregation of primary particles from highly basic sodium silicate solution but without addition of templates. The average pore size of the material was 15.8 nm, which allowed enzyme adsorption inside the pores and high enzyme loading. Specific surface area of the material was found to be 359 m2g?1. A loading of 100 mglipasegdrysilica?1 was obtained at initial enzyme concentration of 1.8 mgmL?1 by physical adsorption. The FTIR spectrum showed the structural conformation of lipase to be retained after adsorption into the mesoporous silica support. Although the efficiency of the mesoporous biocatalyst was shown to be lower than that of the free enzyme, the immobilized enzyme showed enhanced thermal stability and could be desorbed with Triton X-100, indicating the hydrophobic nature of the adsorption. 相似文献
17.
Preparation of activated carbon has been attempted using KOH as activating agent by microwave heating from biodiesel industry solid residue, oil palm empty fruit bunch (EFBAC). The significance of chemical impregnation ratio (IR), microwave power and activation time on the properties of activated carbon were investigated. The optimum condition has been identified at the IR of 1.0, microwave power of 600 W and activation time of 7 min. EFBAC was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and nitrogen adsorption isotherm. The surface chemistry was examined by zeta potential measurement, determination of surface acidity/basicity, while the adsorptive property was quantified using methylene blue as dye model compound. The optimum conditions resulted in activated carbon with a monolayer adsorption capacity of 395.30 mg/g and carbon yield of 73.78%, while the BET surface area and total pore volume were corresponding to 1372 m2/g and 0.76 cm3/g, respectively. 相似文献
18.
Activated carbons have been prepared from olive kernels and their adsorptive characteristics were investigated. A two stage process of pyrolysis-activation has been tested in two scales: (a) laboratory scale pyrolysis and chemical activation with KOH and (b) pilot/bench scale pyrolysis and physical activation with H(2)O-CO(2). In the second case, olive kernels were first pyrolysed at 800 degrees C, during 45 min under an inert atmosphere in an industrial pyrolyser with a throughput of 1t/h (Compact Power Ltd., Bristol, UK). The resulting chars were subsequently activated with steam and carbon dioxide mixtures at 970 degrees C in a batch pilot monohearth reactor at NESA facility (Louvain-la Neuve, Belgium). The active carbons obtained from both scales were characterized by N(2) adsorption at 77 K, methyl-blue adsorption (MB adsorption) at room temperature and SEM analysis. Surface area and MB adsorption were found to increase with the degree of burn-off. The maximum BET surface area was found to be around 1000-1200 m(2)/g for active carbons produced at industrial scale with physical activation, and 3049 m(2)/g for active carbons produced at laboratory with KOH activation. The pores of the produced carbons were composed of micropores at the early stages of activation and both micropores and mesopores at the late stages. Methylene blue removal capacity appeared to be comparable to that of commercial carbons and even higher at high degrees of activation. 相似文献
19.
Despite the sizeable and growing body of research on polymers of intrinsic microporosity (PIMs), a greater understanding of the relationship between the monomer, polymer–polymer and polymer–gas interaction is of significant interest. Methane (CH4), carbon dioxide (CO2), oxygen (O2) and nitrogen (N2) adsorption isotherms at 20°C and up to 20 bar obtained from grand canonical Monte Carlo simulations are presented for PIM-1, PIM-1c, PIM-1n and PIM-1f. The new proposed structure, PIM-1f, is presented and characterised by geometric accessible surface area, pore size distribution, radial distribution function, X-ray scattering and gas adsorption isotherms. PIM-1f increased the geometric surface area when compared with PIM-1; however, the higher system density in combination with the lack of strong adsorption sites yielded the least effective adsorbent for the gases analysed in this study. The gas solubility and ideal solubility selectivity values are also presented and compared with available experimental data for all gases and several gas mixtures illustrating that PIM-1c is the most effective functionality studied for adsorbing these four gases. The conclusions made here are projected to facilitate the design of a material that combines the higher surface area of PIM-1f with the high adsorption capacity of PIM-1c, which will improve the performance of future PIMs. 相似文献