Antibody linking to atomic force microscope tips via disulfide bond formation

Covalent binding of bioligands to atomic force microscope (AFM) tips converts them into monomolecular biosensors by which cognate receptors can be localized on the sample surface and fine details of ligand-receptor interaction can be studied. Tethering of the bioligand to the AFM tip via a approximately 6 nm long, flexible poly(ethylene glycol) linker (PEG) allows the bioligand to freely reorient and to rapidly "scan" a large surface area while the tip is at or near the sample surface. In the standard coupling scheme, amino groups are first generated on the AFM tip. In the second step, these amino groups react with the amino-reactive ends of heterobifunctional PEG linkers. In the third step, the 2-pyridyl-S-S groups on the free ends of the PEG chains react with protein thiol groups to give stable disulfide bonds. In the present study, this standard coupling scheme has been critically examined, using biotinylated IgG with free thiols as the bioligand. AFM tips with PEG-tethered biotin-IgG were specifically recognized by avidin molecules that had been adsorbed to mica surfaces. The unbinding force distribution showed three maxima that reflected simultaneous unbinding of 1, 2, or 3 IgG-linked biotin residues from the avidin monolayer. The coupling scheme was well-reproduced on amino-functionalized silicon nitride chips, and the number of covalently bound biotin-IgG per microm2 was estimated by the amount of specifically bound ExtrAvidin-peroxidase conjugate. Coupling was evidently via disulfide bonds, since only biotin-IgG with free thiol groups was bound to the chips. The mechanism of protein thiol coupling to 2-pyridyl-S-S-PEG linkers on AFM tips was further examined by staging the coupling step in bulk solution and monitoring turnover by release of 2-pyridyl-SH which tautomerizes to 2-thiopyridone and absorbs light at 343 nm. These experiments predicted 10(3)-fold slower rates for the disulfide coupling step than actually observed on AFM tips and silicon nitride chips. The discrepancy was reconciled by assuming 10(3)-fold enrichment of protein on AFM tips via preadsorption, as is known to occur on comparable inorganic surfaces.     

Linking of sensor molecules with amino groups to amino-functionalized AFM tips

The measuring tip of an atomic force microscope (AFM) can be upgraded to a specific biosensor by attaching one or a few biomolecules to the apex of the tip. The biofunctionalized tip is then used to map cognate target molecules on a sample surface or to study biophysical parameters of interaction with the target molecules. The functionality of tip-bound sensor molecules is greatly enhanced if they are linked via a thin, flexible polymer chain. In a typical scheme of tip functionalization, reactive groups are first generated on the tip surface, a bifunctional cross-linker is then attached with one of its two reactive ends, and finally the probe molecule of interest is coupled to the free end of the cross-linker. Unfortunately, the most popular functional group generated on the tip surface is the amino group, while at the same time, the only useful coupling functions of many biomolecules (such as antibodies) are also NH(2) groups. In the past, various tricks or detours were applied to minimize the undesired bivalent reaction of bifunctional linkers with adjacent NH(2) groups on the tip surface. In the present study, an uncompromising solution to this problem was found with the help of a new cross-linker ("acetal-PEG-NHS") which possesses one activated carboxyl group and one acetal-protected benzaldehyde function. The activated carboxyl ensures rapid unilateral attachment to the amino-functionalized tip, and only then is the terminal acetal group converted into the amino-reactive benzaldehyde function by mild treatment (1% citric acid, 1-10 min) which does not harm the AFM tip. As an exception, AFM tips with magnetic coating become demagnetized in 1% citric acid. This problem was solved by deprotecting the acetal group before coupling the PEG linker to the AFM tip. Bivalent binding of the corresponding linker ("aldehyde-PEG-NHS") to adjacent NH(2) groups on the tip was largely suppressed by high linker concentrations. In this way, magnetic AFM tips could be functionalized with an ethylene diamine derivative of ATP which showed specific interaction with mitochondrial uncoupling protein 1 (UCP1) that had been purified and reconstituted in a mica-supported planar lipid bilayer.     

Immobilization of oligonucleotides on poly(ethylene glycol) brush-coated Si surfaces

High-density poly(ethylene glycol) (PEG) molecules are grafted onto Si surfaces in a brush-like configuration. We demonstrate that this surface is an excellent substrate for oligonucleotide immobilization. p-Maleimidophenyl isocyanate is used as a heterobifunctional cross-linker to tether thiol-modified oligonucleotides to terminal OH groups on the PEG brush. This approach gives excellent immobilization specificity and low background. The immobilized oligonucleotides show high sensitivity for the detection of complementary targets.     

Discrimination of DNA hybridization using chemical force microscopy.

Atomic force microscopy (AFM) can be used to probe the mechanics of molecular recognition between surfaces. In the application known as "chemical force" microscopy (CFM), a chemically modified AFM tip probes a surface through chemical recognition. When modified with a biological ligand or receptor, the AFM tip can discriminate between its biological binding partner and other molecules on a heterogeneous substrate. The strength of the interaction between the modified tip and the substrate is governed by the molecular affinity. We have used CFM to probe the interactions between short segments of single-strand DNA (oligonucleotides). First, a latex microparticle was modified with the sequence 3'-CAGTTCTACGATGGCAAGTC and epoxied to a standard AFM cantilever. This DNA-modified probe was then used to scan substrates containing the complementary sequence 5'-GTCAAGATGCTACCGTTCAG. These substrates consisted of micron-scale, patterned arrays of one or more distinct oligonucleotides. A strong friction interaction was measured between the modified tip and both elements of surface-bound DNA. Complementary oligonucleotides exhibited a stronger friction than the noncomplementary sequences within the patterned array. The friction force correlated with the measured strength of adhesion (rupture force) for the tip- and array-bound oligonucleotides. This result is consistent with the formation of a greater number of hydrogen bonds for the complementary sequence, suggesting that the friction arises from a sequence-specific interaction (hybridization) of the tip and surface DNA.     

Sensing specific molecular interactions with the atomic force microscope

One of the unique features of the atomic force microscope (AFM) is its capacity to measure interactions between tip and sample with high sensitivity and unparalleled spatial resolution. Since the development of methods for the functionalization of the tips, the versatility of the AFM has been expanded to experiments where specific molecular interactions are measured. For illustration, we present measurements of the interaction between complementary strands of DNA. A necessary prerequisite for the quantitative analysis of the interaction force is knowledge of the spring constant of the cantilevers. Here, we compare different techniques that allow for the in situ measurement of the absolute value of the spring constant of cantilevers.     

Structural and functional imaging with carbon nanotube AFM probes

Atomic force microscopy (AFM) has great potential as a tool for structural biology, a field in which there is increasing demand to characterize larger and more complex biomolecular systems. However, the poorly characterized silicon and silicon nitride probe tips currently employed in AFM limit its biological applications. Carbon nanotubes represent ideal AFM tip materials due to their small diameter, high aspect ratio, large Young's modulus, mechanical robustness, well-defined structure, and unique chemical properties. Nanotube probes were first fabricated by manual assembly, but more recent methods based on chemical vapor deposition provide higher resolution probes and are geared towards mass production, including recent developments that enable quantitative preparation of individual single-walled carbon nanotube tips [J. Phys. Chem. B 105 (2001) 743]. The high-resolution imaging capabilities of these nanotube AFM probes have been demonstrated on gold nanoparticles and well-characterized biomolecules such as IgG and GroES. Using the nanotube probes, new biological structures have been investigated in the areas of amyloid-beta protein aggregation and chromatin remodeling, and new biotechnologies have been developed such as AFM-based haplotyping. In addition to measuring topography, chemically functionalized AFM probes can measure the spatial arrangement of chemical functional groups in a sample. However, standard silicon and silicon nitride tips, once functionalized, do not yield sufficient resolution to allow combined structural and functional imaging of biomolecules. The unique end-group chemistry of carbon nanotubes, which can be arbitrarily modified by established chemical methods, has been exploited for chemical force microscopy, allowing single-molecule measurements with well-defined functionalized tips.     

Detection of metal binding sites on functional S-layer nanoarrays using single molecule force spectroscopy

Crystalline bacterial cell surface layers (S-layers) show the ability to recrystallize into highly regular pattern on solid supports. In this study, the genetically modified S-layer protein SbpA of Lysinibacillus sphaericus CCM 2177, carrying a hexa-histidine tag (His₆-tag) at the C-terminus, was used to generate functionalized two-dimensional nanoarrays on a silicon surface. Atomic force microscopy (AFM) was applied to explore the topography and the functionality of the fused His₆-tags. The accessibility of the His₆-tags was demonstrated by in-situ anti-His-tag antibody binding to the functional S-layer array. The metal binding properties of the His₆-tag was investigated by single molecule force microscopy. For this purpose, newly developed tris–NTA was tethered to the AFM tips via a flexible polyethylene glycol (PEG) linker. The functionalized tips showed specific interactions with S-layer containing His₆-tags in the presence of nickel ions. Thus the His₆-tag is located at the outer surface of the S-layer and can be used for stable but reversible attachment of functional tris–NTA derivatives.     

Atomic Force Microscopy of Biological Membranes

Atomic force microscopy (AFM) is an ideal method to study the surface topography of biological membranes. It allows membranes that are adsorbed to flat solid supports to be raster-scanned in physiological solutions with an atomically sharp tip. Therefore, AFM is capable of observing biological molecular machines at work. In addition, the tip can be tethered to the end of a single membrane protein, and forces acting on the tip upon its retraction indicate barriers that occur during the process of protein unfolding. Here we discuss the fundamental limitations of AFM determined by the properties of cantilevers, present aspects of sample preparation, and review results achieved on reconstituted and native biological membranes.     

Antibody recognition imaging by force microscopy.

We have developed a method that combines dynamic force microscopy with the simultaneous molecular recognition of an antigen by an antibody, during imaging. A magnetically oscillated atomic force microscopy tip carrying a tethered antibody was scanned over a surface to which lysozyme was bound. By oscillating the probe at an amplitude of only a few nanometers, the antibody was kept in close proximity to the surface, allowing fast and efficient antigen recognition and gentle interaction between tip and sample. Antigenic sites were evident from reduction of the oscillation amplitude, as a result of antibody-antigen recognition during the lateral scan. Lysozyme molecules bound to the surface were recognized by the antibody on the scanning tip with a few nanometers lateral resolution. In principle, any ligand can be tethered to the tip; thus, this technique could potentially be used for nanometer-scale epitope mapping of biomolecules and localizing receptor sites during biological processes.     

Impact of linker and conjugation chemistry on antigen binding,Fc receptor binding and thermal stability of model antibody-drug conjugates

Antibody-drug conjugates (ADCs) with biotin as a model cargo tethered to IgG1 mAbs via different linkers and conjugation methods were prepared and tested for thermostability and ability to bind target antigen and Fc receptor. Most conjugates demonstrated decreased thermostability relative to unconjugated antibody, based on DSC, with carbohydrate and amine coupled ADCs showing the least effect compared with thiol coupled conjugates. A strong correlation between biotin-load and loss of stability is observed with thiol conjugation to one IgG scaffold, but the stability of a second IgG scaffold is relatively insensitive to biotin load. The same correlation for amine coupling was less significant. Binding of antibody to antigen and Fc receptor was investigated using surface plasmon resonance. None of the conjugates exhibited altered antigen affinity. Fc receptor FcγIIb (CD32b) interactions were investigated using captured antibody conjugate. Protein G and Protein A, known inhibitors of Fc receptor (FcR) binding to IgG, were also used to extend the analysis of the impact of conjugation on Fc receptor binding. H10_NPEG4 was the only conjugate to show significant negative impact to FcR binding, which is likely due to higher biotin-load compared with the other ADCs. The ADC aHIS_NLC and aHIS_TPEG8 demonstrated some loss in affinity for FcR, but to much lower extent. The general insensitivity of target binding and effector function of the IgG1 platform to conjugation highlight their utility. The observed changes in thermostability require consideration for the choice of conjugation chemistry, depending on the system being pursued and particular application of the conjugate.     

Mapping HA‐tagged protein at the surface of living cells by atomic force microscopy

Single‐molecule force spectroscopy using atomic force microscopy (AFM) is more and more used to detect and map receptors, enzymes, adhesins, or any other molecules at the surface of living cells. To be specific, this technique requires antibodies or ligands covalently attached to the AFM tip that can specifically interact with the protein of interest. Unfortunately, specific antibodies are usually lacking (low affinity and specificity) or are expensive to produce (monoclonal antibodies). An alternative strategy is to tag the protein of interest with a peptide that can be recognized with high specificity and affinity with commercially available antibodies. In this context, we chose to work with the human influenza hemagglutinin (HA) tag (YPYDVPDYA) and labeled two proteins: covalently linked cell wall protein 12 (Ccw12) involved in cell wall remodeling in the yeast Saccharomyces cerevisiae and the β2‐adrenergic receptor (β2‐AR), a G protein‐coupled receptor (GPCR) in higher eukaryotes. We first described the interaction between HA antibodies, immobilized on AFM tips, and HA epitopes, immobilized on epoxy glass slides. Using our system, we then investigated the distribution of Ccw12 proteins over the cell surface of the yeast S. cerevisiae. We were able to find the tagged protein on the surface of mating yeasts, at the tip of the mating projections. Finally, we could unfold multimers of β2‐AR from the membrane of living transfected chinese hamster ovary cells. This result is in agreement with GPCR oligomerization in living cell membranes and opens the door to the study of the influence of GPCR ligands on the oligomerization process. Copyright © 2014 John Wiley & Sons, Ltd.     

Polyethylene glycol as a spacer for solid-phase enzyme immobilization

With the aim to improve the performance of enzyme bound to hydrophilic solid phases, their immobilization with polyethylene glycol (PEG) tether have been studied. Sweet potato β-amylase, which hydrolyses the high molecular weight substrate starch and β-galactosidase, which acts on low molecular weight substrates, were used as model enzymes and beaded thiol–agarose as solid phase. Several two step methods for the introduction of the tether using a bis-oxirane homobifunctional PEG as well as a heterobifunctional derivative with a hydroxysuccinimide ester and a maleimide group have been evaluated. Amino groups, native and de novo thiol groups in the enzymes were utilized for immobilization.

The best approach was found to be to first introduce the PEG derivative via one of its reactive groups to the enzyme. Subsequently the formed conjugate was bound to the solid phase by the remaining reactive group.

Attempts to first introduce the PEG tether into the solid phase were not successful.

A high degree of substitution with PEG chains on the enzyme leads to high immobilization yields for both β-amylase and β-galactosidase, but relatively lower gel-bound activity for the former enzyme which is acting on a high molecular weight substrate and thus more sensitive for steric shielding effects. With optimal degree of PEG substitution (which occurred at five times molar excess of the heterobifunctional reagent) the gel-bound activity of β-amylase was increased from 12% (for the derivative without tether) to 31%.     

Synthesis and characterization of a photocleavable cross-linker and its application on tunable surface modification and protein photodelivery

A heterobifunctional photocleavable cross-linker based on an o-nitrobenzyl ester moiety was synthesized. The cross-linker has N-hydroxysuccinimidyl and disulfide groups attached at each end and thus can anchor a protein to a gold-coated substrate surface. Steady-state spectroscopic studies suggest that the cross-linker undergoes a clean C-O fragmentation upon irradiation with a quantum yield of 0.1. Consequently, immobilized proteins (such as avidin or antibodies) on a substrate surface can be released efficiently (>95%) under UV irradiation (lambda > 300 nm) without degrading the protein functionality. We also demonstrated protein delivery via bioconjugation of protein molecules to a gold-coated atomic-force microscope (AFM) tip. When the proteins are photoreleased from the AFM tip, they are delivered to the substrate surface as protein clusters of uniform size. This has been confirmed using both AFM and fluorescence microscopy. The application of bioconjugation in this study opens a new avenue for tunable surface modification and controllable protein delivery in studies of biological systems on the nanometer scale.     

Development of a general ligand for immunoaffinity partitioning in two phase aqueous polymer systems

The effect on the partition of erythrocytes in a two phase aqueous polymer system based on dextran T500 and polyethylene glycol (PEG) 8000 of a combination of immunoaffinity ligands, namely, rabbit immunoglobulin G (IgG) and PEG 1900-modified monoclonal IgG, was examined as a potential cell separation technique. Several hybridoma lines secreting mouse monoclonal IgG specific for the Fc receptor of rabbit IgG were raised. The monoclonal IgG was modified by cyanuric chloride attachment of PEG 1900, causing the modified antibody to partition predominantly into the PEG-rich upper phase of the systems. The PEG-modified monoclonal IgG was used as an affinity ligand in the two phase polymer system to specifically increase the partition of rabbit anti-NN glycophorin IgG. The rabbit IgG was applied together with the PEG-modified monoclonal IgG to increase the partition of human erythrocytes. The same system had no effect on the partition of rabbit erythrocytes. These experiments demonstrate that a monoclonal antibody can be modified and used as a general reagent with which to alter cell partition in two phase aqueous polymer systems in an immunologically specific manner.     

The role of GDNF/Ret signaling in ureteric bud cell fate and branching morphogenesis

While GDNF signaling through the Ret receptor is critical for kidney development, its specific role in branching morphogenesis of the epithelial ureteric bud (UB) is unclear. Ret expression defines a population of UB "tip cells" distinct from cells of the tubular "trunks," but how these cells contribute to UB growth is unknown. We have used time-lapse mosaic analysis to investigate normal cell fates within the growing UB and the developmental potential of cells lacking Ret. We found that normal tip cells are bipotential, contributing to both tips and trunks. Cells lacking Ret are specifically excluded from the tips, although they contribute to the trunks, revealing that the tips form and expand by GDNF-driven cell proliferation. Surprisingly, the mutant cells assumed an asymmetric distribution in the UB trunks, suggesting a model of branching in which the epithelium of the tip and the adjacent trunk is remodeled to form new branches.     

Attaching single biomolecules selectively to the apex of AFM tips for measuring specific interactions

We present a general approach for preparing well-defined AFM tips for probing single target molecules. We demonstrated that carboxylic acid groups could be generated by electrochemical oxidation selectively at the apex of an AFM tip that is coated with a monolayer of oligo(ethylene glycol) derivatives for resisting nonspecific interactions. These carboxylic acid groups were used as handles to tether only one ligand molecule, such as biotin, to the tip apex for measurement of specific interactions with biomolecules.     

Impact of linker and conjugation chemistry on antigen binding,Fc receptor binding and thermal stability of model antibody-drug conjugates

Antibody-drug conjugates (ADCs) with biotin as a model cargo tethered to IgG1 mAbs via different linkers and conjugation methods were prepared and tested for thermostability and ability to bind target antigen and Fc receptor. Most conjugates demonstrated decreased thermostability relative to unconjugated antibody, based on DSC, with carbohydrate and amine coupled ADCs showing the least effect compared with thiol coupled conjugates. A strong correlation between biotin-load and loss of stability is observed with thiol conjugation to one IgG scaffold, but the stability of a second IgG scaffold is relatively insensitive to biotin load. The same correlation for amine coupling was less significant. Binding of antibody to antigen and Fc receptor was investigated using surface plasmon resonance. None of the conjugates exhibited altered antigen affinity. Fc receptor FcγIIb (CD32b) interactions were investigated using captured antibody conjugate. Protein G and Protein A, known inhibitors of Fc receptor (FcR) binding to IgG, were also used to extend the analysis of the impact of conjugation on Fc receptor binding. H10_NPEG4 was the only conjugate to show significant negative impact to FcR binding, which is likely due to higher biotin-load compared with the other ADCs. The ADC aHIS_NLC and aHIS_TPEG8 demonstrated some loss in affinity for FcR, but to much lower extent. The general insensitivity of target binding and effector function of the IgG1 platform to conjugation highlight their utility. The observed changes in thermostability require consideration for the choice of conjugation chemistry, depending on the system being pursued and particular application of the conjugate.     

Force measurement for antigen-antibody interaction by atomic force microscopy using a photograft-polymer spacer

To determine the intermolecular force on protein-protein interaction (PPI) by atomic force microscopy (AFM), a photograft-polymer spacer for protein molecules on both surfaces of the substrate and AFM probe tip was developed, and its effectiveness was assessed in a PPI model of a pair of human serum albumin (HSA) and its monoclonal antibody (anti-HSA). A carboxylated photoiniferter, N-(dithiocarboxy)sarcosine, was derivatized on both surfaces of the glass substrate and AFM probe tip, and subsequently water-soluble nonionic vinyl monomers, N,N-dimethylacrylamide (DMAAm), were graft-polymerized on them upon ultraviolet light irradiation. DMAAm-photograft-polymerized spacers with carboxyl groups at the growing chain end but with different chain lengths on both surfaces were prepared. The proteins were covalently bound to the carboxyl terminus of the photograft-polymer chain using a water-soluble condensation agent. The effects of the graft-spacer length on the profile of the force-distance curves and on the unbinding characteristics (unbinding force and unbinding distance) were examined in comparison with those in the case of the commercially available poly(ethylene glycol) (PEG) spacer. The frequency of the nonspecific adhesion force profile was markedly decreased with the use of the photograft spacers. Among the force curves detected, a high frequency of single-peak curves indicating the unbinding process of a single pair of proteins and a very low frequency of multiple-peak profiles were observed for the photograft spacers, regardless of the graft chain length, whereas a high frequency of no-force peaks was noted. These observations were in marked contrast with those for the PEG spacer. The force peak values determined ranged from 88 to 94 pN, irrespective of the type of spacer, while the standard deviation of force distribution observed for the photograft spacer was lower than that for the PEG spacer, indicating that the photograft spacers provide a higher accuracy of force determination.     

Antipeptide antibodies that recognize a lymphocyte substance P receptor

In an effort to investigate the presence of substance P (SP) receptors on lymphocytes, polyclonal antibodies against SP receptors were developed. The immunogen used to generate these antibodies was a peptide encoded by an RNA complementary to the mRNA for SP. The rationale for using this SP complementary peptide (termed SP CP) as an immunogen resulted from the observation that 3H-SP bound to microtiter wells coated with SP CP in a dose dependent and saturable fashion. Furthermore, binding was blocked with excess unlabeled SP or SP antagonist, D-Pro2-D-Phe7-D-Trp9-SP. Inasmuch as the peptide, SP CP, specifically bound 3H-SP, we hypothesized that antibodies against this peptide might recognize a SP receptor binding site. Using the SP receptor positive lymphoblast cell line, IM-9, affinity-purified antibodies against SP CP but not antibodies against keyhole limpet hemocyanin recognized a molecule on the surface of IM-9 cells. Anti-SP CP binding to IM-9 cells was blocked with excess SP antagonist, suggesting that the antibody and the SP antagonist were competing for the same binding site. In support of this possibility, anti-SP CP antibodies blocked 3H-SP binding to IM-9 cells. An immunoaffinity column coupled with antibodies against SP CP bound protein from solubilized IM-9 cells. This isolated protein bound 125I-Tyr8-SP and binding was specifically blocked with SP as well as by SP antagonist, neurokinin A, and eledoisin. Passthrough material did not bind SP suggesting that a SP receptor had been purified. Western blot analysis of solubilized IM-9 cell proteins using anti-SP CP antibodies but not preimmune IgG recognized a single protein of 58,000 D. Taken together, these results demonstrate that antibodies against SP CP recognize a SP receptor present on the lymphocyte cell line, IM-9.     

Identification of the immunoglobulin G receptor of human platelets

The binding site of IgG on human platelets was studied by the use of the cleavable heterobifunctional cross-linking agent N-succinimidyl (4-azidophenyldithio)propionate. Binding characteristics of the derivatized IgG were similar to normal IgG. Periodate-borohydride treatment of platelets also did not significantly alter their ability to bind IgG. N-Succinimidyl (4-azidophenyldithio)propionate was bound to IgG via a succinimidyl ester and then photolyzed in the presence of intact platelets. Their membrane glycoproteins were first tritiated by the periodate-borohydride method. The cross-linked product was analyzed by two dimensional sodium dodecyl sulfate-polyacrylamide gradient gel electrophoresis. The non-reduced first-dimension gels were subjected to 5% 2-mercaptoethanol prior to separation in the second dimension. Such gels were then evaluated by fluorography, silver staining, and counting the radioactivity of sequential gel strips in the area of cross-linking. The protein complexes at the interface between stacking and running gel were further resolved in isoelectric focusing gels. One IgG-containing band could be identified. After reduction, the constituent proteins of the cross-linked complex were analyzed by sodium dodecyl sulfate-polyacrylamide gradient gel electrophoresis and subsequent immunoblotting with an antiserum against platelet membrane glycoproteins. All of these studies gave evidence of glycoprotein IIIa as the receptor of IgG. Based on the results of the different experimental approaches, we conclude that glycoprotein IIIa is the IgG receptor in human platelets.