High-throughput SNP discovery and genotyping in durum wheat (<Emphasis Type="Italic">Triticum durum</Emphasis> Desf.)

We describe the application of complexity reduction of polymorphic sequences (CRoPS^®) technology for the discovery of SNP markers in tetraploid durum wheat (Triticum durum Desf.). A next-generation sequencing experiment was carried out on reduced representation libraries obtained from four durum cultivars. SNP validation and minor allele frequency (MAF) estimate were carried out on a panel of 12 cultivars, and the feasibility of genotyping these SNPs in segregating populations was tested using the Illumina Golden Gate (GG) technology. A total of 2,659 SNPs were identified on 1,206 consensus sequences. Among the 768 SNPs that were chosen irrespective of their genomic repetitiveness level and assayed on the Illumina BeadExpress genotyping system, 275 (35.8%) SNPs matched the expected genotypes observed in the SNP discovery phase. MAF data indicated that the overall SNP informativeness was high: a total of 196 (71.3%) SNPs had MAF >0.2, of which 76 (27.6%) showed MAF >0.4. Of these SNPs, 157 were mapped in one of two mapping populations (Meridiano × Claudio and Colosseo × Lloyd) and integrated into a common genetic map. Despite the relatively low genotyping efficiency of the GG assay, the validated CRoPS-derived SNPs showed valuable features for genomics and breeding applications such as a uniform distribution across the wheat genome, a prevailing single-locus codominant nature and a high polymorphism. Here, we report a new set of 275 highly robust genome-wide Triticum SNPs that are readily available for breeding purposes.     

The parameters of grain filling and yield components in common wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) and durum wheat (<Emphasis Type="Italic">Triticum turgidum</Emphasis> L. var. <Emphasis Type="Italic">durum</Emphasis>)

Final grain dry weight, a component of yield in wheat, is dependent on the duration and the rate of grain filling. The purpose of the study was to compare the grain filling patterns between common wheat, (Triticum aestivum L.), and durum wheat, (Triticum turgidum L. var. durum), and investigate relationships among grain filling parameters, yield components and the yield itself. The most important variables in differentiating among grain filling curves were final grain dry weight (W) for common wheat genotypes and grain filling rate (R) for durum wheat genotypes; however, in all cases the sets of variables important in differentiating among grain filling curves were extended to either two or all three parameters. Furthermore, in one out of three environmental conditions and for both groups of genotypes, the most important parameter in the set was grain filling duration (T). It indicates significant impact of environmental conditions on dry matter accumulation and the mutual effect of grain filling duration and its rate on the final grain dry weight. The medium early anthesis date could be associated with further grain weight and yield improvements in wheat. Grain filling of earlier genotypes occurs in more temperate environments, which provides enough time for gradual grain fill and avoids the extremes of temperature and the stress of dry conditions.     

Assessment of genetic diversity among Syrian durum (<Emphasis Type="Italic">Triticum</Emphasis> ssp. <Emphasis Type="Italic">durum</Emphasis>) and bread wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) using SSR markers

Genetic diversity among 49 wheat varieties (37 durum and 12 bread wheat) was assayed using 32 microsatellites representing 34 loci covering almost the whole wheat genome. The polymorphic information content (PIC) across the tested loci ranged from 0 to 0.88 with average values of 0.57 and 0.65 for durum and bread wheat respectively. B-genome had the highest mean number of alleles (10.91) followed by A genome (8.3) whereas D genome had the lowest number (4.73). The correlation between PIC and allele number was significant in all genome groups accounting for 0.87, 074 and 0.84 for A, B and D genomes respectively, and over all genomes, the correlation was higher in tetraploid (0.8) than in hexaploid wheat varieties (0.5). The cluster analysis discriminated all varieties and clearly divided the two ploidy levels into two separate clusters that reflect the differences in genetic diversity within each cluster. This study demonstrates that microsatellites markers have unique advantages compared to other molecular and biochemical fingerprinting techniques in revealing the genetic diversity in Syrian wheat varieties that is crucial for wheat improvement.     

Construction and characterization of a half million clone BAC library of durum wheat (<Emphasis Type="Italic">Triticum turgidum</Emphasis> ssp. <Emphasis Type="Italic">durum</Emphasis>)

Durum wheat (Triticum turgidum ssp. durum, 2n = 4x = 28, genomes AB) is an economically important cereal used as the raw material to make pasta and semolina. In this paper we present the construction and characterization of a bacterial artificial chromosome (BAC) library of tetraploid durum wheat cv. Langdon. This variety was selected because of the availability of substitution lines that facilitate the assignment of BACs to the A and B genome. The selected Langdon line has a 30-cM segment of chromosome 6BS from T. turgidum ssp. dicoccoides carrying a gene for high grain protein content, the target of a positional cloning effort in our laboratory. A total of 516,096 clones were organized in 1,344 384-well plates and blotted on 28 high-density filters. Ninety-eight percent of these clones had wheat DNA inserts (0.3% chloroplast DNA, 1.4% empty clones and 0.3% empty wells). The average insert size of 500 randomly selected BAC clones was 131 kb, resulting in a coverage of 5.1-fold genome equivalents for each of the two genomes, and a 99.4% probability of recovering any gene from each of the two genomes of durum wheat. Six known copy-number probes were used to validate this theoretical coverage and gave an estimated coverage of 5.8-fold genome equivalents. Screening of the library with 11 probes related to grain storage proteins and starch biosynthesis showed that the library contains several clones for each of these genes, confirming the value of the library in characterizing the organization of these important gene families. In addition, characterization of fingerprints from colinear BACs from the A and B genomes showed a large differentiation between the A and B genomes. This library will be a useful tool for evolutionary studies in one of the best characterized polyploid systems and a source of valuable genes for wheat. Clones and high-density filters can be requested at Communicated by P. LangridgeThe first two authors contributed equally to the investigation     

Genetic control of NaCl tolerance in seedlings of durum wheat <Emphasis Type="Italic">Triticum durum</Emphasis> Desf. accessions

The genetic control of tolerance to NaCl (0.7 MPa, 9.8 g/l) was studied in six durum wheat accessions from the world collection of the Vavilov Institute of Plant Industry. Analysis of F₁, F₂, and F₃ of the crosses between tolerant forms and a in accessions k-17227 and k-10930susceptible tester has demonstrated that a high salt tolerance is determined by one dominant gene; in accession k-46660, by three independent dominant genes; and in accessions k-15305 and k-41884, by single genes without dominance effect. Potential allelism of the salt tolerance genes has been studied for the accessions with monogenically determined salt tolerance, and either identity or tight linkage of the genes determining salt tolerance of accessions k-15305 and k-41884 has been demonstrated. Provisional designations Tsa1, Tsa2, and Tsa3 are proposed for the genetic factors determining salt tolerance of accessions k-10930, k-17227, and k-15305, respectively.     

Comparative analysis of the differential regeneration response of various genotypes of <Emphasis Type="Italic">Triticum aestivum</Emphasis>, <Emphasis Type="Italic">Triticum durum</Emphasis> and <Emphasis Type="Italic">Triticum dicoccum</Emphasis>

An efficient genotype independent, in vitro regeneration system was developed for nine popular Indian wheat cultivars, three each of Triticum aestivum L. viz., CPAN1676, HD2329 and PBW343, Triticum durum Desf. viz., PDW215, PDW233 and WH896, and Triticum dicoccum Schrank. Schubl. viz., DDK1001, DDK1025 and DDK1029, by manipulating the concentration and time of exposure to the growth regulator, thidiazuron (TDZ). A total of 18 (for immature inflorescence and embryo explant) and six (for mature embryo explant) different combinations of growth regulators were tried for callusing and regeneration, respectively. Media combination with low concentration of TDZ (2.2 μM) in combination to auxin and/or cytokinin (depending upon culture stage), was found to be effective for immature and mature explants. Compact, nodular and highly embryogenic calli were obtained by using immature embryo, immature inflorescence and mature embryo explants, and regeneration frequency up to 25 shoots/explant with an overall 80% regeneration was achieved. Comparable regeneration frequency was achieved for mature embryo explants. No separate hormone combination for rooting was required and plantlets ready to transfer to soil could be obtained in a short period of 8–10 weeks. This protocol can be used for raising transgenic plants for functional genomics analysis of agronomically important traits in the three species of wheat.     

Production of organic acids and adsorption of Cd on roots of durum wheat (<Emphasis Type="Italic">Triticum turgidum</Emphasis> L. var. <Emphasis Type="Italic">durum</Emphasis>)

A number of isolines of durum wheat (Triticum turgidum var. durum) differ in their translocation of Cd. In the field, the high isolines accumulate twice the Cd in leaves and grain when compared to the low isolines. The hypothesis that differential accumulation of Cd is associated with differential production of organic acids was tested by measuring Cd content in tissues, Cd partitioning within the root, and organic acids in tissues. In solution culture, the high and low isolines of W9261-BG did not differ in any of the variables measured. Within W9260-BC, the low isoline had half the Cd in its shoot, 30% more tightly bound Cd in the root and higher concentrations of fumaric, malic, and succinic acids in the root compared to the high isoline. Differential Cd accumulation may be linked to differential adsorption and retention of Cd in the roots of the low Cd-accumulating isolines, possibly via chelation with organic acids.     

Development of a SCAR marker associated with salt tolerance in durum wheat (<Emphasis Type="Italic">Triticum turgidum</Emphasis> ssp. <Emphasis Type="Italic">durum</Emphasis>) from a semi-arid region

Durum wheat (Triticum turgidum ssp. durum) is one of the main species of cultivated wheat. In arid and semi-arid areas, salinity stress reduces durum wheat productivity. This study used 26 durum wheat accessions from semi-arid regions in Tunisia to analyze plant tolerance to salt stress. Salt stress was experimentally applied by regularly submerging pots in NaCl solution. The salt tolerance trait index (STTI) and salt tolerance index (STI) of various growth parameters were used as criteria to select for salt tolerance. Analysis of genetic relationships was carried out to determine the genetic distance between durum wheat accessions. Based on simple sequence repeats analysis, a molecular marker for salt stress resistance in durum wheat was developed. Salt-treated plants had reduced morphological traits compared to control plants. Most STTIs in all genotypes were below 100 %. Based on STI, 8 accessions were found to be salt-resistant, 16 were salt-moderate, two were salt-susceptible. Analysis of the genetic relationships among 28 Tunisian durum wheat accessions revealed that landraces of the same nominal type are closely related. Of the 94 SSR primers investigated, three were selected and used to design sequence characterized amplified region (SCAR) primers. One SCAR primer pair, KUCMB_Xgwm403_2, produced a 207 bp band that was present in salt-resistant durum wheat lines but absent in salt-susceptible lines. The results suggest that KUCMB_Xgwm403_2 could be a potential genetic tag for salt-tolerant durum wheats.     

Transfer and mapping of the heat tolerance component traits of <Emphasis Type="Italic">Aegilops speltoides</Emphasis> in tetraploid wheat <Emphasis Type="Italic">Triticum durum</Emphasis>

Aegilops speltoides is an important genetic resource for wheat improvement and has high levels of heat tolerance. A heat-tolerant accession of Ae. speltoides pau3809 was crossed with Triticum durum cv. PDW274, and BC₂F_4-6 backcross introgression lines (BILs) were developed, phenotyped for important physiological traits, genotyped using SSR markers and used for mapping the QTL governing heat tolerance component traits. A set of 90 BILs was selected from preliminary evaluation of a broader set of 262 BILs under heat stress. Phenotyping was conducted for physiological traits such as cell membrane thermostability, chlorophyll content, acquired thermotolerance, canopy temperature and stay green. Much variation for these traits was observed in random as well as selected sets of BILs, and comparison of the BILs with the recurrent parent showed improvement for these traits under normal as well as heat stress conditions, indicating that introgressions from Ae. speltoides might have led to the improvement in the heat tolerance potential of the BILs. Introgression profiling of the 90 BILs using SSR markers identified Ae. speltoides introgression on all the 14 chromosomes with introgressions observed on A as well as B genome chromosomes. QTL mapping identified loci for various heat tolerance component traits on chromosomes 2B, 3A, 3B, 5A, 5B and 7A at significant LOD scores and with phenotypic contributions varying from 11.1 to 28.7 % for different traits. The heat-tolerant BILs and QTL reported in the present study form a potential resource that can be used for wheat germplasm enhancement for heat stress tolerance.     

Genetic mapping of stem rust resistance gene <Emphasis Type="Italic">Sr13</Emphasis> in tetraploid wheat (<Emphasis Type="Italic">Triticum turgidum</Emphasis> ssp. <Emphasis Type="Italic">durum</Emphasis> L.)

Wheat stem rust caused by Puccinia graminis f. sp. tritici, can cause significant yield losses. To combat the disease, breeders have deployed resistance genes both individually and in combinations to increase resistance durability. A new race, TTKSK (Ug99), identified in Uganda in 1999 is virulent on most of the resistance genes currently deployed, and is rapidly spreading to other regions of the world. It is therefore important to identify, map, and deploy resistance genes that are still effective against TTKSK. One of these resistance genes, Sr13, was previously assigned to the long arm of chromosome 6A, but its precise map location was not known. In this study, the genome location of Sr13 was determined in four tetraploid wheat (T. turgidum ssp. durum) mapping populations involving the TTKSK resistant varieties Kronos, Kofa, Medora and Sceptre. Our results showed that resistance was linked to common molecular markers in all four populations, suggesting that these durum lines carry the same resistance gene. Based on its chromosome location and infection types against different races of stem rust, this gene is postulated to be Sr13. Sr13 was mapped within a 1.2–2.8 cM interval (depending on the mapping population) between EST markers CD926040 and BE471213, which corresponds to a 285-kb region in rice chromosome 2, and a 3.1-Mb region in Brachypodium chromosome 3. These maps will be the foundation for developing high-density maps, identifying diagnostic markers, and positional cloning of Sr13.     

Molecular mapping of the novel powdery mildew resistance gene <Emphasis Type="Italic">Pm36</Emphasis> introgressed from <Emphasis Type="Italic">Triticum turgidum</Emphasis> var. <Emphasis Type="Italic">dicoccoides</Emphasis> in durum wheat

Powdery mildew, caused by Blumeria graminis f.sp. tritici, is one of the most important wheat diseases in many regions of the world. Triticum turgidum var. dicoccoides (2n=4x=AABB), the progenitor of cultivated wheats, shows particular promises as a donor of useful genetic variation for several traits, including disease resistances. The wild emmer accession MG29896, resistant to powdery mildew, was backcrossed to the susceptible durum wheat cultivar Latino, and a set of backcross inbred lines (BC(5)F(5)) was produced. Genetic analysis of F(3) populations from two resistant introgression lines (5BIL-29 x Latino and 5BIL-42 x Latino) indicated that the powdery mildew resistance is controlled by a single dominant gene. Molecular markers and the bulked segregant analysis were used to characterize and map the powdery mildew resistance. Five AFLP markers (XP43M32((250)), XP46M31((410)), XP41M37((100)), XP41M39((250)), XP39M32((120))), three genomic SSR markers (Xcfd07, Xwmc75, Xgwm408) and one EST-derived SSR marker (BJ261635) were found to be linked to the resistance gene in 5BIL-29 and only the BJ261635 marker in 5BIL-42. By means of Chinese Spring nullisomic-tetrasomic, ditelosomic and deletion lines, the polymorphic markers and the resistance gene were assigned to chromosome bin 5BL6-0.29-0.76. These results indicated that the two lines had the same resistance gene and that the introgressed dicoccoides chromosome segment was longer (35.5 cM) in 5BIL-29 than that introgressed in 5BIL-42 (less than 1.5 cM). As no powdery mildew resistance gene has been reported on chromosome arm 5BL, the novel resistance gene derived from var. dicoccoides was designated Pm36. The 244 bp allele of BJ261635 in 5BIL-42 can be used for marker-assisted selection during the wheat resistance breeding process for facilitating gene pyramiding.     

Mapping and validation of a major QTL for yellow pigment content on 7AL in durum wheat (<Emphasis Type="Italic">Triticum turgidum</Emphasis> L. ssp. <Emphasis Type="Italic">durum</Emphasis>)

Yellow pigment content in durum wheat (Triticum turgidum L. ssp. durum) is an important criterion for both pasta bright yellow color and human health because of antioxidant properties of carotenoids involved in this pigmentation. In the present study, QTLs for yellow pigment content in durum wheat were mapped in a population of 140 RILs developed from a intraspecific cross between a released variety (PDW 233) and a landrace (Bhalegaon 4). This trait was evaluated in one location for 3 years and in two more locations for one additional year (five different year × location combinations further called “environments”). Yellow pigment content was highly heritable across the five different environments. Analysis of variance showed the significant effect of genotype, environment and genotype × environment interaction on the trait. Five different QTLs linked to yellow pigment content were identified on chromosome 1A, 3B, 5B, 7A and 7B across five different environments. The strongest one located on the distal part of the long arm of chromosome 7A, QYp.macs-7A, explained 55.22% of the variation in the trait, while, remaining four QTLs explained 5–8.75% of phenotypic variation in yellow pigment content. Marker analysis revealed significant association of one ISSR and one AFLP fragment with the trait. These two markers were linked to the major QTL QYp.macs-7A and were converted into SCAR markers. These SCAR markers were further validated on another population as well as 38 diverse genotypes so as to prove their potential in marker assisted selection. These markers will be very useful for the marker assisted breeding of durum wheat for higher yellow pigment content.     

Physical mapping of <Emphasis Type="Italic">puroindoline b</Emphasis>-<Emphasis Type="Italic">2</Emphasis> genes and molecular characterization of a novel variant in durum wheat (<Emphasis Type="Italic">Triticum turgidum</Emphasis> L.)

The puroindoline genes (Pina and Pinb) are the functional components of the common or bread wheat (Triticum aestivum L.) grain hardness locus that are responsible for kernel texture. In this study, four puroindoline b-2 variants were physically mapped using nulli-tetrosomic lines of bread wheat cultivar Chinese Spring and substitution lines of durum wheat (Triticum turgidum L.) cultivar Langdon. Results indicated that Pinb-2v1 was on 7D of Chinese Spring, Pinb-2v2 on 7B of Chinese Spring, Pinb-2v3 on 7B of Chinese Spring and Langdon, and Pinb-2v4 on 7A of Chinese Spring and Langdon. A new puroindoline b-2 variant, designated Pinb-2v5, was identified at the puroindoline b-2 locus of durum wheat cultivar Langdon, with a difference of only five single nucelotide polymorphisms compared with Pinb-2v4. Sequencing results indicated that, in comparison with the Pinb-2v3 sequence (AM99733 and GQ496618 with one base-pair modification of G to T at 6th position, designated Pinb-2v3a) in bread wheat cultivar Witchta, the coding region of Pinb-2v3 in 12 durum wheat cultivars had a single nucleotide change from T to C at the 311th position, resulting in a corresponding amino acid change from valine to alanine at the 104th position. This new allele was designated Pinb-2v3b. The study of puroindoline b-2 gene polymorphism in CIMMYT and Italian durum wheat germplasm and discovery of a novel puroindoline b-2 variant could provide useful information for further understanding the molecular and genetic basis of kernel hardness and illustrating gene duplication events in wheat.     

<Emphasis Type="Italic">Ty</Emphasis>1<Emphasis Type="Italic">/copia</Emphasis>- and <Emphasis Type="Italic">Ty</Emphasis>3<Emphasis Type="Italic">/gypsy</Emphasis>-like DNA sequences in <Emphasis Type="Italic">Helianthus </Emphasis>species

Two repeated DNA sequences isolated from a partial genomic DNA library of Helianthus annuus, p HaS13 and p HaS211, were shown to represent portions of the int gene of a Ty3 /gypsy retroelement and of the RNase-Hgene of a Ty1 /copia retroelement, respectively. Southern blotting patterns obtained by hybridizing the two probes to BglII- or DraI-digested genomic DNA from different Helianthus species showed p HaS13 and p HaS211 were parts of dispersed repeats at least 8 and 7 kb in length, respectively, that were conserved in all species studied. Comparable hybridization patterns were obtained in all species with p HaS13. By contrast, the patterns obtained by hybridizing p HaS211 clearly differentiated annual species from perennials. The frequencies of p HaS13- and p HaS211-related sequences in different species were 4.3x10(4)-1.3x10(5) copies and 9.9x10(2)-8.1x10(3) copies per picogram of DNA, respectively. The frequency of p HaS13-related sequences varied widely within annual species, while no significant difference was observed among perennial species. Conversely, the frequency variation of p HaS211-related sequences was as large within annual species as within perennials. Sequences of both families were found to be dispersed along the length of all chromosomes in all species studied. However, Ty3 /gypsy-like sequences were localized preferentially at the centromeric regions, whereas Ty1/ copia-like sequences were less represented or absent around the centromeres and plentiful at the chromosome ends. These findings suggest that the two sequence families played a role in Helianthusgenome evolution and species divergence, evolved independently in the same genomic backgrounds and in annual or perennial species, and acquired different possible functions in the host genomes.     

Expression and functional analysis of <Emphasis Type="Italic">TaASY1</Emphasis> during meiosis of bread wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis>)

Background  

Pairing and synapsis of homologous chromosomes is required for normal chromosome segregation and the exchange of genetic material via recombination during meiosis. Synapsis is complete at pachytene following the formation of a tri-partite proteinaceous structure known as the synaptonemal complex (SC). In yeast, HOP1 is essential for formation of the SC, and localises along chromosome axes during prophase I. Homologues in Arabidopsis (AtASY1), Brassica (BoASY1) and rice (OsPAIR2) have been isolated through analysis of mutants that display decreased fertility due to severely reduced synapsis of homologous chromosomes. Analysis of these genes has indicated that they play a similar role to HOP1 in pairing and formation of the SC through localisation to axial/lateral elements of the SC.     

Efficient and rapid <Emphasis Type="Italic">Agrobacterium-</Emphasis>mediated genetic transformation of durum wheat (<Emphasis Type="Italic">Triticum turgidum L. var. durum)</Emphasis> using additional virulence genes

Genetic transformation of wheat, using biolistics or Agrobacterium, underpins a range of specific research methods for identifying genes and studying their function in planta. Transgenic approaches to study and modify traits in durum wheat have lagged behind those for bread wheat. Here we report the use of Agrobacterium strain AGL1, with additional vir genes housed in a helper plasmid, to transform and regenerate the durum wheat variety Ofanto. The use of the basic pSoup helper plasmid with no additional vir genes failed to generate transformants, whereas the presence of either virG⁵⁴² or the 15 kb Komari fragment containing virB, virC and virG⁵⁴² produced transformation efficiencies of between 0.6 and 9.7%. Of the 42 transgenic plants made, all but one (which set very few seeds) appeared morphologically normal and produced between 100 and 300 viable seeds. The transgene copy number and the segregation ratios were found to be very similar to those previously reported for bread wheat. We believe that this is the first report describing successful genetic transformation of tetraploid durum wheat (Triticum turgidum L. var. durum) mediated by Agrobacterium tumefaciens using immature embryos as the explant.     

Improvements in the production of doubled haploids in durum wheat (<Emphasis Type="Italic">Triticum turgidum</Emphasis> L<Emphasis Type="Italic">.</Emphasis>) through isolated microspore culture

The objective of this study was to produce durum wheat doubled haploid (DH) plants through the induction of microspore embryogenesis. The microspore culture technique was improved to maximize production of green plants per spike using three commercial cultivars. Studies on factors such as induction media composition, induction media support and the stage and growth of donor plants were carried out in order to develop an efficient protocol to regenerate green and fertile DH plants. Microspores were plated on a C₁₇ induction culture medium with ovary co-culture and a supplement of glutathione plus glutamine; 300 g/l Ficoll Type-400 was incorporated to the induction medium support. Donor plants were fertilized with a combination of macro and microelements. With the cultivars ‘Ciccio’ and ‘Claudio’ an average of 36.5 and 148.5 fertile plants were produced, respectively, from 1,000 anthers inoculated. This technique was then used to produce fertile DH plants of potential agronomic interest from a collection of ten F₁ crosses involving cultivars of high breeding value. From these crosses 849 green plants were obtained and seed was harvested from 702 plants indicating that 83% of green plants were fertile and therefore were spontaneously DHs. No aneuploid plant was obtained. The 702 plants yielded enough seeds to be field tested. One of the DH lines obtained by microspore embryogenesis, named ‘Lanuza’, has been sent to the Spanish Plant Variety Office for Registration by the Batlle Seed Company. This protocol can be used instead of the labor-intensive inter-generic crossing with maize as an economically feasible method to obtain DHs for most crosses involving the durum wheat cultivars grown in Spain.     

The <Emphasis Type="Italic">Caenorhabditis</Emphasis><Emphasis Type="Italic">briggsae</Emphasis> genome contains active <Emphasis Type="Italic">CbmaT1</Emphasis> and <Emphasis Type="Italic">Tcb1</Emphasis> transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.