High-performance liquid chromatographic determination of diclofenac in human plasma after solid-phase extraction

A novel high-performance liquid chromatographic (HPLC) method for the quantification of diclofenac in human plasma was set up. Samples, added with ibuprofen (used as internal standard) were purified by solid-phase extraction using Abselut Nexus cartridges (Varian) not requiring pre-conditioning. Drugs of interest were eluted directly into the autosampler vials and injected. The recovery of diclofenac was 92%, the analysis lasted 7 min with a sensitivity of 5 ng/ml and intra- and inter-day RSDs of 3 and 8%, respectively. The pharmacokinetics of diclofenac after oral and rectal administration in 10 healthy volunteers are reported.     

High-performance liquid chromatographic determination of ambroxol in human plasma

Ambroxol has been determined in biological fluids using a rapid and sensitive high-performance liquid chromatographic method. The samples prepared from plasma by liquid—liquid extraction were analysed on reversed-phase silica gel by competing-ion chromatography with ultraviolet detection. The method was applied to the determination of ambroxol levels in twelve healthy volunteers after oral administration of 90 mg of ambroxol in tablets of Mucosolvan and Ambrosan.     

High-performance liquid chromatographic determination of pentamidine in plasma

This report describes the analysis of pentamidine by isocratic reversed-phase high-performance liquid chromatography (HPLC) using a commercially available compound (melphalan) as the external standard. Previously described assays use ion-pairing HPLC, an internal standard (hexamidine) that is not readily available, and require a relatively large sample size. In the present assay, pentamidine was extracted from plasma using solid-phase extraction and was analyzed using a C₁₈ column and a mobile phase containing 18% acetonitrile, 2% methanol, 0.2 M ammonium acetate and 0.5% triethylamine. The identity of the eluting peaks was verified using a diode array detector. The extraction yield of pentamidine was 82%. The limit of detection was 8.6 ng/ml with a sample size of 100 μl. The inter-day and intra-day coefficients of variation ranged between 0.3% and 10% with an average of 5%. This method was applied to study the pharmacokinetics of pentamidine in rodents.     

High-performance liquid chromatographic determination of ganciclovir in plasma

A rapid, selective and sensitive isocratic reversed-phase high-performance liquid chromatographic method for the determination of ganciclovir in plasma samples was developed. This method, which was applied to the analysis of plasma ganciclovir from heart transplant patients under ganciclovir therapy for cytomegalovirus infections, represents a suitable analytical tool for drug monitoring and pharmacokinetic investigations.     

High-performance liquid chromatographic determination of nemonapride and desmethylnemonapride in human plasma using an electrochemical detection

A high-performance liquid chromatographic method using an electrochemical detector (HPLC–ED) was developed for the determination of nemonapride and its active metabolite, desmethylnemonapride in human plasma. Nemonapride, desmethylnemonapride and moperone chloride, which was used as the internal standard (I.S.) in plasma, were extracted by a rapid and simple procedure based on C₁₈ bonded-phase extraction, and were separated by C₈ reversed-phase HPLC column. Nemonapride and desmethylnemonapride were detected by high conversion efficiency amperometric detection at +0.84 V. Determination of both nemonapride and desmethylnemonapride were possible in the concentration range at 0.25–5.0 ng/ml, and the limit of detection for each was 0.1 ng/ml. The recoveries of nemonapride and desmethylnemonapride added to plasma were 97.0–98.2% and 96.7–98.8%, respectively, with coefficients of variation of less than 7.2% and 10.3%, respectively. This method is applicable to drug level monitoring in the plasma of schizophrenia patients treated with nemonapride and to the study of pharmacokinetics.     

High-performance liquid chromatographic determination of beta-phenylethylamine in human plasma with fluorescence detection

A simple and highly sensitive method for the determination of beta-phenylethylamine in human plasma is investigated. The method employs high-performance liquid chromatography with fluorescence detection. beta-Phenylethylamine and p-methylbenzylamine (internal standard) in human plasma are isolated by cation-exchange chromatography on a Toyopak SP cartridge and then converted into the corresponding fluorescent derivatives with 3,4-dihydro-6,7-dimethoxy-4-methyl-3-oxoquinoxaline-2-carbonyl chloride, a fluorescence derivatization reagent for amines. The derivatives are separated within 30 min on a reversed-phase column, TSK gel ODS-120T, with isocratic elution, and detected fluorometrically. The detection limit of beta-phenylethylamine is 0.3 pmol/ml in plasma (S/N = 3).     

High-performance liquid chromatographic method for the determination of gabapentin in human plasma

A sensitive high-performance liquid chromatography (HPLC) method using UV detection for the determination of gabapentin in human plasma has been developed. In this method, gabapentin was extracted from human plasma with a reversed-phase solid-phase extraction (SPE) cartridge followed by derivatization with phenylisothiocyanate. Analysis was achieved by using a HPLC system that was equipped with a UV detector. The quantitation limit of gabapentin in human plasma was 0.03 microg/ml. The method is sensitive with excellent selectivity and reproducibility and it has been applied to a bioequivalence clinical study with great success.     

High-performance liquid chromatographic determination of naproxen, ibuprofen and diclofenac in plasma and synovial fluid in man

High-performance liquid chromatographic assay procedures have been developed for naproxen, ibuprofen and diclofenac in human plasma and synovial fluid samples. A single liquid—liquid extraction procedure was used to isolate each compound from acidified biological matrix prior to the quantitative analysis. A Spherisorb ODS column (12.5 cm × 4.6 mm I.D.) was used for all the chromatography. Naproxen was eluted with a mobile phase of methanol—Sörensen's buffer at pH 7 (37:63, v/v). Ibuprofen and diclofenac were eluted using mobile phases of methanol—water at pH 3.3 (65:35, v/v and 63:37, v/v, respectively). Diphenylacetic acid was used as the internal standard for the assay of naproxen and flurbiprofen was used in the analysis of ibuprofen and diclofenac. Inter- and intra-day coefficients of variation were less than 7%. The assays were used in clinical studies of the three drugs in osteo- and rheumatoid arthritis patients.     

High-performance liquid chromatographic determination of modafinil and its two metabolites in human plasma using solid-phase extraction

A simple procedure for the simultaneous determination of modafinil, its acid and sulfone metabolites in plasma is described. The assay involved an extraction of the drug, metabolites and internal standard from plasma with a solid-phase extraction using C₁₈ cartridges. These compounds were eluted by methanol. The extract was evaporated to dryness at 40°C under a gentle stream of nitrogen. The residue was redissolved in 250 μl of mobile-phase and a 30 μl aliquot was injected via an automatic sampler into the liquid chromatograph and eluted with the mobile-phase (26%, v/v acetonitrile in 0.05 M orthophosphoric acid buffer adjusted to pH 2.6) at a flow-rate of 1.1 ml/min on a C₈ Symmetry cartridge column (5 μm, 150 mm×3.9 mm, Waters) at 25°C. The eluate was detected at 225 nm. Intra-day coefficients of variation ranged from 1.0 to 2.9% and inter-day coefficients from 0.9 to 6.1%. The limits of detection and quantitation of the assay were 0.01 μg/ml and 0.10 μg/ml respectively.     

High-performance liquid chromatographic determination of vertilmicin in rat plasma using sensitive fluorometric derivatization

A sensitive and reliable high-performance liquid chromatographic method was developed for the determination of vertilmicin in rat plasma. Derivatization with 9-fluorenylmethyl chloroformate (FMOC-Cl) followed by C(18) reversed-phase chromatography allowed the fluorimetric detection of vertilmicin. Optimal conditions for the derivatization of vertilmicin are described. The limit of quantification was 0.02 mg/L. The pharmacokinetics of vertilmicin was studied in 24 rats following intramuscular injection (i.m.) of different doses (4, 8, 16, 32 mg/kg of body weight). The pharmacokinetic parameter values were estimated by use of 3P97 program. In this study, we assessed the dose proportionality of vertilmicin after single intramuscular injection doses and obtained new information on the pharmacokinetics of the compound.     

High-performance liquid chromatographic assay for the determination of 5-methyltetrahydrofolate in human plasma

An isocratic high-performance liquid chromatographic method for the determination of 5-methyltetrahydrofolate (5-MTHF) in human plasma is described. The method involves solid-phase extraction of 5-MTHF and p-aminoacetophenon (an internal standard) using Sep-Pak C₁₈ cartridges. Separation was achieved with an ODS column using acetonitrile and phosphate buffer supplemented with octanesulfonic acid (an ion-pairing agent). The pH of the mobile phase (2.5) was optimal with respect to the mode of detection (fluorescence). The method was validated in the range of 5-MTHF concentrations from 0.0625 μmol/l to 4.0 μmol/l. Within-day and inter-day precision expressed by the relative standard deviation was less than 8.1% and inaccuracy did not exceed 8.7%. The method is specific, accurate and sensitive enough to be used in pharmacokinetic studies for the assessment of the systemic availability of 5-MTHF after leucovorin administration to patients as a rescue after high-dose therapy with methotrexate. The limit of detection was 0.17 pmol which corresponds to a plasma concentration of 1.7 nmol/l. Thus, the assay could potentially be used for the measurement of 5-MTHF in the range of physiological concentrations in plasma (5–20 nmol/l).     

High-performance liquid chromatographic method for the determination of mycophenolate mofetil in human plasma

A method for the quantification of mycophenolate mofetil (MMF, CellCept) in plasma using solid-phase extraction and HPLC is described here. A solution of internal standard is added to a 0.5-ml plasma aliquot. The resulting sample is treated with water and dilute HCl and applied to a C₁₈ solid-phase extraction column. After a water wash, the MMF and internal standard are eluted with methanol-0.1 M citrate-phosphate buffer, pH 2.6 (80:20, v/v). A 20-μl aliquot of the eluate is injected onto a C₁₈ column (5 μm particle size, 150 × 4.6 mm I.D.) and eluted at ambient temperature with acetonitrile-0.05 M citrate-phosphate buffer, pH 3.6, containing 0.02 M heptanesulfonic acid (41:59, v/v). Quantification is achieved by UV detection at 254 nm. The method is reproducible, accurate and specific for MMF. Using 0.5 ml of plasma for analysis, the quantification limit is 0.400 μg/ml and the range is 0.400–20 μg/ml. Based on the stability profile of MMF in plasma, it is recommended that blood samples collected following intravenous infusion be immediately stored on ice and that plasma be prepared rapidly, immediately stored frozen at −80°C and analyzed within four months of collection.     

High-performance liquid column and thin-layer chromatographic determination of human serum glibenclamide at therapeutic levels

For glibenclamide bioavailability studies in serum, high-performance liquid column and thin-layer chromatographic methods were introduced. Both methods are specific, accurate and sensitive with detection limits of at least 5 ng of glibenclamide per ml of serum. Detection is performed in the ultraviolet at wavelengths of 200 nm for liquid chromatography or 300 nm for thin-layer chromatography.Serum levels determined by either method correlated well with those determined by an already existing radioimmunoassay. Some pharmacokinetic data were computed using a one-compartment open model.