Mutational and sequence analysis of transmembrane segment 6 orientation in TetA proteins

The packing orientations of the 8 transmembrane (TM) segments that line the central, aqueous transport channel within tetracycline resistance proteins (TetA) have been established. However, the orientations of the remaining 4 segments, TMs 3, 6, 9, and 12, located at the periphery, and away from the transport channel, have not yet been determined. In this study, the packing orientation of TM6 within the class C TetA protein encoded by plasmid pBR322 was evaluated by substitution mutagenesis and analysis of sequence conservation and amphipathicity. The combined data support a model in which the conserved and polar face of the TM6 alpha-helix containing Asn170 and Asn173 orients towards channel-lining TM segments, and the relatively non-conserved and hydrophobic face of TM6 points towards membrane lipids.     

Differences in mesentericin secretion systems from two Leuconostoc strains

Leuconostoc mesenteroides Y105 and L. mesenteroides FR52 produce both mesentericin Y105 and B105, in equal amounts. The mesentericin operons of L. mesenteroides FR52 and Y105 which are involved in mesentericin Y105 and B105 production, were both sequenced and compared. Differences were limited to the two genes, mesD and mesE, which encode the dedicated transport system of mesentericin Y105. Analysis of mesentericin non-producing mutants and complementation experiments demonstrated that the major role of the membrane fusion protein, MesE, was in bacteriocin secretion for both strains. Moreover, the secretion machinery MesDE was demonstrated to be capable of transportation and maturation of the two pre-bacteriocins, mesentericin Y105 and B105. We also demonstrate that although MesDEs from strains Y105 and FR52 have significant sequence differences, both transporters were capable of assuring secretion of either bacteriocin.     

Different routes for integral protein insertion into Ricinus communis protein-body and glyoxysome membranes

Total polyadenylated RNA from ripening or germinating Ricinus communis L. endosperm was translated in rabbit reticulocyte lysate in the absence or presence of canine pancreatic microsomes. The products were immunoprecipitated using antibodies raised againts Triton X-114-extracted integral membrane proteins of protein bodies or glyoxysomes. While the proteins of proteinbody membranes were found to insert co-translationally into added microsomes, this was not observed in the case of glyoxysomal proteins. This observation was confirmed using antibodies raised against a purified glyoxysome membrane protein, alkaline lipase. These results indicate that different routes exist for the insertion of membrane proteins into the two organelles. In both cases membrane-protein insertion does not appear to be accompanied by proteolytic processing.Abbreviations anti-PB antiserum to integral protein-body membrane proteins - anti-G antiserum to integral glyoxysomal membrane proteins - anti-L antiserum to alkaline lipase - ER endoplasmic reticulum - M_r relative molecular mass - mRNA poly(A)-rich messenger RNA - PAGE polyacrylamide gel electrophoresis - poly(A) polyadenylic acid - SDS sodium dodecyl sulphate     

Characterization of tetracycline resistance lactobacilli isolated from swine intestines at western area of Taiwan

To investigate the frequency of tetracycline resistance (Tet-R) lactobacilli in pig intestines, a total of 256 pig colons were analyzed and found to contain typical colonies of Tet-R lactic acid bacteria in every sample, ranging from 3.2 × 10³ to 6.6 × 10⁵ CFU/cm². From these samples, a total of 159 isolates of Tet-R lactobacilli were obtained and identified as belonging to 11 species, including Lactobacillus reuteri, Lactobacillus amylovorus, Lactobacillus salivarius, Lactobacillus plantarum, Lactobacillus ruminis, Lactobacillus kefiri, Lactobacillus fermentum, Lactobacillus sakei, Lactobacillus coryniformis, Lactobacillus parabuchneri and Lactobacillus letivazi. Based on the EFSA (2008) breakpoints, all isolates, after MIC analysis, were qualified as Tet-R, from which the significant high Tet-R MIC₅₀ and MIC₉₀ values indicated an ecological distribution of Tet-R lactobacilli mostly with high resistance potency in pig colons. PCR-detection identified 5 tet genes in these isolates, the most predominant one being tet (W), followed by tet (M), (L), (K), and (Q). Their detection rates were 82.0%, 22.5%, 14.4%, 8.1% and 0.9%, respectively. Noteworthily, isolates of the same species carrying identical tet gene(s) usually had a wide different MIC values. Furthermore, strain-subtyping of these isolates by REP-PCR demonstrated a notable genotypic biodiversity % (average = 62%).     

Emergence of tetracycline resistance due to a multiple drug resistance plasmid in Vibrio cholerae O139

Abstract Of the 173 clinical strains of Vibrio cholerae O139 isolated from India, Bangladesh, and Thailand tested, six strains from India were resistant to tetracycline, ampicillin, chloramphenicol, kanamycin, and gentamicin. These six strains harbored a self-transmissible plasmid that mediated resistance to tetracycline, ampicillin, chloramphenicol, kanamycin, gentamicin, sulfamethoxazole, trimethoprim, and O/129. The multiple drug resistance plasmids were 200 kb in size and belonged to the incompatibility group C. Although a majority of the O139 strains (94.8%) were highly resistant to streptomycin, sulfamethoxazole, trimethoprim, and O/129, the tetracycline-susceptible strains so far tested were plasmid-negative. The data suggest the existence of two distinct multiple antimicrobial agent resistance (MAR) patterns in V. cholerae O139.     

Expression of the tetA(C) tetracycline efflux pump in Escherichia coli confers osmotic sensitivity

Expression of tetA(C) in Escherichia coli confers resistance to tetracycline as well as sensitivity to nickel and cadmium salts, lipophilic chelating agents, and aminoglycoside antibiotics. In this report we determine that high-level expression of tetA(C) also confers an osmotic sensitivity. The osmotic-sensitive phenotype is distinct from the tetracycline-resistant phenotype and can be localized to a domain contained within the first 98 amino acid residues of the TetA(C) polypeptide.     

信号分子AI-2的体外合成及其对副溶血性弧菌四环素耐药性的调控作用

【背景】抗菌药的过度使用引起细菌耐药性日益严重,作为重要的食源性致病菌,副溶血性弧菌也表现出一定程度的耐药性。群体感应系统可以调控细菌的耐药性,为研究副溶血性弧菌的耐药机制和控制技术提供新的途径。【目的】探讨群体感应信号分子AI-2 (autoinducer-2)对海产品中分离的副溶血性弧菌四环素耐药性的调控作用。【方法】通过原核表达制备AI-2合成关键酶——S-核糖同型半胱氨酸酶(S-ribosylhomocysteinase, LuxS)和S-腺苷同型半胱氨酸核苷酶(S-adenosylhomocysteinenucleosidase,Pfs),体外合成AI-2,通过菌落计数法分析AI-2对副溶血性弧菌在四环素亚抑菌浓度下耐受性的影响,采用逆转录实时荧光定量PCR法测定不同浓度AI-2对副溶血性弧菌四环素耐药基因转录水平的影响。【结果】通过原核表达获得LuxS和Pfs,作用于底物S-腺苷同型半胱氨酸能合成具有生物活性的AI-2,其荧光强度约为阳性对照的6倍。在四环素亚抑菌浓度下,AI-2能显著促进副溶血性弧菌的生长,6、15、30μmol/L浓度AI-2能不同程度地提高副溶血性弧菌...     

Role of the import motor in insertion of transmembrane segments by the mitochondrial TIM23 complex

The TIM23 complex mediates translocation of proteins across, and their lateral insertion into, the mitochondrial inner membrane. Translocation of proteins requires both the membrane-embedded core of the complex and its ATP-dependent import motor. Insertion of some proteins, however, occurs in the absence of ATP, questioning the need for the import motor during lateral insertion. We show here that the import motor associates with laterally inserted proteins even when its ATPase activity is not required. Furthermore, our results suggest a role for the import motor in lateral insertion. Thus, the import motor is involved in ATP-dependent translocation and ATP-independent lateral insertion.     

Mutational analysis of loxP sites for efficient Cre-mediated insertion into genomic DNA

The Cre/loxP system has been used in transgenic models primarily to excise DNA flanked by loxP sites for gene deletion. However, the insertion reaction is more difficult to control since the excision event is kinetically favored. Mutant loxP sites favoring integration were identified using a novel, bacterial screening system. Utilizing lambda integrase, mutant loxP sites were placed at the E. coli attB site and the excision-insertion ratios of incoming DNA plasmids carrying a second, complementary mutant loxP site were determined. Comparison of 50 mutant loxP sites combinations to the native loxP site revealed that mutations to the inner 6 bp of the Cre binding domain severely inhibited recombination, while those in the outer 8 bps were more tolerated. The most efficient loxP combinations resulted in 1421-fold and 1529-fold increases in relative integration rates over wild-type loxP sites. These loxP mutants could be exploited for site-directed "tag and insert" recombination experiments.     

Deep membrane insertion of prion protein upon reduction of disulfide bond

The membrane may play a role in the pathogenesis of the prion protein (PrP). Cytoplasmic expression of PrP causes the conversion of PrP to a self-perpetuating PrP^Sc-like conformation and the interaction of polypeptide chain with the hydrophobic core of the membrane is believed to be closely correlated with neurodegeneration. However, it is still elusive what factors govern the membrane interaction of PrP. Here, we show that PrP penetrates deeply into the membrane when the single disulfide bond is reduced, which results in membrane disruption and leakage. The proteinase K treatment and the fluorescence quenching assays showed that a predicted transmembrane domain of PrP penetrates into the membrane when the disulfide bond was reduced. Therefore, the oxidation state of PrP might be an important factor that influences its neurotoxicity or pathogenesis.     

Membrane protein expression and production: effects of polyhistidine tag length and position

Polyhistidine tags enable the facile purification of proteins by immobilized metal affinity chromatography (IMAC). Both the type and position of purification tags can affect significantly properties of a protein such as its expression level, behavior in solution, and its ability to form suitable samples (esp. suitable crystals for X-ray crystallography). We investigated systematically the effects of polyhistidine tag length and position on many properties related to expression and purification of recombinant integral membrane proteins. Specifically, modified Escherichia coli pET expression vectors were built that placed 6- or 10-histidine tags at the N- or C-termini of the subcloned gene. The E. coli water channel AqpZ was subcloned into this suite of vectors and its expression, purification, solution properties, and yield were characterized. These studies show that: (1) all vectors yield similar expression levels, (2) tag length has a greater effect than tag position upon yield, (3) neither tag length nor position affects significantly detergent solubilization of the protein, (4) the length of the tag affects the oligomerization state of the purified protein, and (5) the tag length and position change chromatographic behavior of the detergent-solubilized protein. In addition, substitution of the lysine codon AAA at the second position, previously shown to have some effect upon soluble protein expression levels, did not have a large effect on AqpZ production. We are currently producing approximately 12 mg of purified AqpZ per liter of shake-flask culture, and preliminary crystals that diffract to approximately 5A resolution have been obtained.     

Mammalian Prion protein expression in yeast; a model for transmembrane insertion

The prion protein (PrP), a GPI-anchored glycoprotein, is inefficiently secreted by mammalian microsomes, 50% being found as transmembrane (TM) proteins with the central TM1 segment spanning the membrane. TM1 hydrophobicity is marginal for lateral membrane insertion, which is primarily driven by hydrophobic interaction between the ER translocon and substrates in transit. Most inserted TM1 has its N-terminus in the ER lumen (Ntm orientation), as expected for arrest of normal secretion. However, 20% is found in inverted Ctm orientation. These are minor species in vivo, presumably a consequence of efficient quality control. PrP mutations that increase TM1 hydrophobicity result in increased Ctm insertion, both in vitro and in mouse brain, and a strong correlation is found between CtmPrP insertion and neuropathology in transgenic mice; a copper-dependent pathogenicity mechanism is suggested. PrP fusions with a C-terminal epitope tag, when expressed in yeast cells at moderate levels, appear to interact efficiently with the translocon, providing a useful model for testing the effects of PrP mutations on TM insertion and orientation. However, secretion of PrP by the mammalian translocon requires the TRAP complex, absent in yeast, where essentially all PrP ends up as TM species, 85–90% Ntm and 10–15% Ctm. Although yeast is, therefore, an incomplete mimic of mammalian PrP trafficking, effects on Ctm insertion of mutations increasing TM1 hydrophobicity closely reflect those seen in vitro. Electrostatic substrate-translocon interactions are a major determinant of TM protein insertion orientation and the yeast model was used to investigate the role of the large negative charge difference across TM1, a likely cause of translocation delay that would favor TM insertion and Ctm orientation. An increase in ΔCh from −5 to −7 caused a marked increase in Ctm insertion, while a decrease to −3 or −1 allowed 35 and about 65% secretion, respectively. Utility of the yeast model and the role of this charge difference in driving PrP membrane insertion are confirmed.     

The activation energy for insertion of transmembrane alpha-helices is dependent on membrane composition

The physical mechanisms that govern the folding and assembly of integral membrane proteins are poorly understood. It appears that certain properties of the lipid bilayer affect membrane protein folding in vitro, either by modulating helix insertion or packing. In order to begin to understand the origin of this effect, we investigate the effect of lipid forces on the insertion of a transmembrane alpha-helix using a water-soluble, alanine-based peptide, KKAAAIAAAAAIAAWAAIAAAKKKK-amide. This peptide binds to preformed 1,2-dioleoyl-l-alpha-phosphatidylcholine (DOPC) vesicles at neutral pH, but spontaneous transmembrane helix insertion directly from the aqueous phase only occurs at high pH when the Lys residues are de-protonated. These results suggest that the translocation of charge is a major determinant of the activation energy for insertion. Time-resolved measurements of the insertion process at high pH indicate biphasic kinetics with time constants of ca 30 and 430 seconds. The slower phase seems to correlate with formation of a predominantly transmembrane alpha-helical conformation, as determined from the transfer of the tryptophan residue to the hydrocarbon region of the membrane. Temperature-dependent measurements showed that insertion can proceed only above a certain threshold temperature and that the Arrhenius activation energy is of the order of 90 kJ mol(-1). The kinetics, threshold temperature and the activation energy change with the mole fraction of 1,2-dioleoyl-l-alpha-phosphatidylethanolamine (DOPE) introduced into the DOPC membrane. The activation energy increases with increasing DOPE content, which could reflect the fact that this lipid drives the bilayer towards a non-bilayer transition and increases the lateral pressure in the lipid chain region. This suggests that folding events involving the insertion of helical segments across the bilayer can be controlled by lipid forces.     

Hydrophobic segment of dengue virus C protein. Interaction with model membranes

Abstract

Dengue virus (DENV) C protein is essential for viral assembly. DENV C protein associates with intracellular membranes through a conserved hydrophobic domain and accumulates around endoplasmic reticulum-derived lipid droplets which could provide a platform for capsid formation during assembly. In a previous work we described a region in DENV C protein which induced a nearly complete membrane rupture of several membrane model systems, which was coincident with the theoretically predicted highly hydrophobic region of the protein. In this work we have carried out a study of the binding to and interaction with model biomembranes of a peptide corresponding to this DENV C region, DENV2_C6. We show that DENV2_C6 partitions into phospholipid membranes, is capable of rupturing membranes even at very low peptide-to-lipid ratios and its membrane-activity is modulated by lipid composition. These results identify an important region in the DENV C protein which might be directly implicated in the DENV life cycle through the modulation of membrane structure.     

Biodegradation by activated sludge and toxicity of tetracycline into a semi-industrial membrane bioreactor

Much attention has been devoted recently to the fate of pharmaceutically active compounds such as tetracycline antibiotics in soil and water. Tetracycline (TC) biodegradability by activated sludge derived from membrane bioreactor (MBR) treating swine wastewater via CO₂-evolution was evaluated by means of modified Sturm test, which was also used to evaluate its toxicity on carbon degradation. The impact of tetracycline on a semi-industrial MBR process was also examined and confronted to lab-scale experiments. After tetracycline injection in the pilot, no disturbance was detected on the elimination of organic matters and ammonium (nitrification), reaching after injection 88% and 99% respectively; only denitrification was slightly affected. Confirming the ruggedness and the superiority of membrane bioreactors over conventional bioreactors, no toxicity was observed at the considered level of TC in the pilot (20 mg TOC L⁻¹), while at lab-scale sodium benzoate biodegradation was completely inhibited from 10 mg TOC L⁻¹ TC. The origin of the activated sludge showed a significant impact on the performances, since the ultimate biodegradation was in the range −50% to −53% for TC concentrations in the range 10–20 mg TOC L⁻¹ with conventional bioreactor sludge and increased to 18% for 40 mg TOC L⁻¹ of TC with activated sludge derived from the MBR pilot. This confirmed the higher resistance of activated sludge arising from membrane bioreactor.     

Real-time PCR methods for quantitative monitoring of streptomycin and tetracycline resistance genes in agricultural ecosystems

Antibiotic application in plant agriculture is primarily used to control fire blight caused by Erwinia amylovora in pome fruit orchards. In order to facilitate environmental impact assessment for antibiotic applications, we developed and validated culture-independent quantitative real-time PCR multiplex assays for streptomycin (strA, strB, aadA and insertion sequence IS1133) and tetracycline (tetB, tetM and tetW) resistance elements in plant and soil samples. The qPCR were reproducible and consistent whether the DNA was extracted directly from bacteria, plant and soil samples inoculated with bacteria or soil samples prior to and after manure slurry treatment. The genes most frequently identified in soils pre- and post-slurry treatment were strB, aadA, tetB and tetM. All genes tested were detected in soils pre-slurry treatment, and a decrease in relative concentrations of tetB and the streptomycin resistance genes was observed in samples taken post-slurry treatment. These multiplex qPCR assays offer a cost-effective, reliable method for simultaneous quantification of antibiotic resistance genes in complex, environmental sample matrices.     

Mechanism of signal-anchor triage during early steps of membrane protein insertion

1. Download : Download high-res image (182KB)
2. Download : Download full-size image

     

Tuning the insertion properties of pHLIP

The pH (low) insertion peptide (pHLIP) has exceptional characteristics: at neutral pH it is an unstructured monomer in solution or when bound to lipid bilayer surfaces, and it inserts across a lipid bilayer as a monomeric alpha-helix at acidic pH. The peptide targets acidic tissues in vivo and may be useful in cancer biology for delivery of imaging or therapeutic molecules to acidic tumors. To find ways to vary its useful properties, we have designed and analyzed pHLIP sequence variants. We find that each of the Asp residues in the transmembrane segment is critical for solubility and pH-dependent membrane insertion of the peptide. Changing both of the Asp residues in the transmembrane segment to Glu, inserting an additional Asp into the transmembrane segment, or replacing either of the Asp residues with Ala leads to aggregation and/or loss of pH-dependent membrane insertion of the peptide. However, variants with either of the Asp residues changed to Glu remained soluble in an aqueous environment and inserted into the membrane at acidic pH with a higher pK_app of membrane insertion.