Anammox反应器启动过程中颗粒污泥性状变化特性

以厌氧颗粒污泥作为接种物,通过185 d的运行,成功启动了上流式厌氧氨氧化污泥床(Upflow anaerobic sludge blanket,UASB)反应器。反应器的进水氨氮与亚硝氮浓度分别提升至224 mg/L和255 mg/L,容积氮去除速率提升至3.76 kg/(m3·d)。采用红外光谱、扫描电镜和透射电镜等对厌氧氨氧化颗粒污泥的性状进行观察,发现颗粒污泥在启动过程中经历了污泥颗粒裂解到污泥颗粒重组的过程,且厌氧氨氧化颗粒污泥表面含有丰富的官能团,说明厌氧氨氧化颗粒污泥可能具有良好的吸附性能。采用宏基因组测序的方法对启动前后颗粒污泥的生态结构进行分析,发现原接种污泥优势菌群(变形菌门、厚壁菌门、拟杆菌门)丰度大幅减少,厌氧氨氧化菌所属的浮霉状菌门丰度则由1.59%提升到23.24%。     

污水处理系统中厌氧氨氧化菌分布及影响因素

基于厌氧氨氧化的污水生物脱氮工艺近年来发展迅速,污水处理系统中厌氧氨氧化菌的分布和多样性成为了重要的研究方向。目前,在污水处理系统中曾检测出多种厌氧氨氧化(Anaerobic ammonium oxidation,Anammox)菌,最常被检测出的是待定布罗卡地菌Candidate Brocadia和待定斯图加特库氏菌Candidate Kuenenia的Anammox菌,并且研究发现单一生境下往往只存在一种类型的Anammox菌,但是影响Anammox菌分布和多样性的因素与机制目前仍不明确。系统总结了污水处理系统中,不同工艺形式和运行条件下的Anammox菌分布情况,归纳分析了关键因素对Anammox菌分布的影响,包括底物浓度和微生物比生长速率、污泥性质与微生物生境、多重因素的联合作用和影响等。在此基础上,阐述了Anammox菌分布机制研究的工程意义,并对该领域的研究方向和思路进行了展望。     

厌氧氨氧化反应器启动过程的影响因素及微生物群落变化研究进展

自厌氧氨氧化反应发现以来,由于其具有低能耗、无需外加碳源等优点,已成为人们在污水生物脱氮研究与应用中的最新关注点。然而,由于极低的生长速率、极长的倍增时间以及严格的代谢条件等特点,限制了厌氧氨氧化菌的应用。综述了厌氧氨氧化菌富集培养过程中的影响因素,介绍了不同污泥来源的厌氧氨氧化优势菌属、分子鉴定方法,提供了部分用于厌氧氨氧化菌鉴定使用的引物序列和厌氧氨氧化菌最新发现的属与种。最后,对未来的研究方向提出一些建议思考,以期为厌氧氨氧化工艺在污水处理中的应用提供参考。     

厌氧氨氧化颗粒污泥研究进展

厌氧氨氧化(Anaerobic ammonium oxidation,Anammox)工艺是一种新的生物脱氮技术。一经问世即得到人们青睐,现已成为废水脱氮的升级技术。厌氧氨氧化菌(Anaerobicammoniumoxidation bacteria,AnAOB)是Anammox工艺的功能之源。以颗粒污泥形态存在的AnAOB是Anammox颗粒污泥床脱氮系统的重要支柱。由于AnAOB生长缓慢且对环境条件变化敏感,Anammox脱氮系统不仅启动缓慢,而且运行极易失稳甚至崩溃。值得庆幸的是,AnAOB可自主选择、组合和固定功能菌群落而形成Anammox颗粒污泥,并通过其优良的重力沉降性能和高效的基质转化性能保障Anammox脱氮系统的持续工作。本文综述了AnAOB的种类和特性及Anammox颗粒污泥的组成、结构和功能,以期为Anammox工艺的优化和拓展提供参考。     

厌氧氨氧化体的组成、结构与功能

厌氧氨氧化(Anammox)是微生物和环境领域的研究热点之一。厌氧氨氧化菌(AnAOB)是Anammox的功能载体。不同于大部分原核微生物,AnAOB具有独特的细胞器——厌氧氨氧化体,它是进行Anammox代谢的场所。研究厌氧氨氧化体有助于探明厌氧氨氧化菌的代谢特性。本文综述了厌氧氨氧化体的组成、结构与功能,以期为从事Anammox研究的同行提供参考。     

中试厌氧氨氧化反应器的启动与调控

研究了中试厌氧氨氧化(Anaerobic ammonium oxidation,Anammox)反应器的启动性能。结果表明,以硝化反硝化污泥、短程硝化污泥、厌氧絮体污泥和厌氧颗粒污泥混合接种,经过255d的运行,可在常温下(5oC～27oC)成功启动中试Anammox反应器,反应器的基质氮去除速率可达1.30kg/(m3·d)。厌氧氨氧化是致碱反应,厌氧氨氧化成为反应器内的主导反应后,进水pH宜控制在厌氧氨氧化适宜范围的偏低水平(6.8左右)。亚硝酸盐既是Anammox菌的基质,也是抑制剂,控制进水亚硝酸盐浓度(13～36mg/L)有助于厌氧氨氧化反应。菌种是生物反应器的功能之源,向中试装置投加少量厌氧氨氧化污泥(投加比2%),可大大加速中试Anammox反应器的启动进程。     

厌氧颗粒污泥微生物群落结构与功能的研究进展

厌氧颗粒污泥(anaerobicgranularsludge,AnGS)是由多种功能微生物组成的自固定化聚集体，具有容积负荷高、工艺简单、剩余污泥产量低等优点，在废水处理领域中显示出巨大的技术和经济潜力，被认为是一种很有前景的低碳废水处理工艺。本文系统总结了近年来厌氧颗粒污泥微生物结构和功能的研究成果，从微生物学角度讨论了厌氧颗粒污泥形成及稳定的影响因素，并对今后厌氧颗粒污泥的研究进行了展望，以期为后续厌氧颗粒污泥技术的深入研究和实际工程应用提供参考。     

厌氧氨氧化菌的物种多样性与生态分布

厌氧氨氧化是微生物和环境领域的重大发现,厌氧氨氧化可同时去除氨氮和亚硝氮,在环境工程上具有重大开发价值.由于厌氧氨氧化菌生长极慢,倍增时间长达11 d以上,严重制约了该反应的开发进程,因此,对厌氧氨氧化菌的研究具有重要意义.厌氧氨氧化菌种类丰富,除了人们最早认识的浮霉状菌外,还有硝化细菌和反硝化细菌,这些菌群生态分布广泛,为开辟新的厌氧氨氧化菌种资源创造了条件.硝化细菌和反硝化细菌兼有厌氧氨氧化能力,其代谢多样性为加速厌氧氨氧化反应器的启动提供了依据.厌氧消化污泥可呈现硫酸盐型厌氧氨氧化活性,可为新型生物脱氮工艺的研发奠定基础.探明厌氧氨氧化菌种资源及其生态分布,将有利于厌氧氨氧化的开发应用.     

厌氧氨氧化菌脱氮机理及其在污水处理中的应用

厌氧氨氧化细菌(anammox)可以将亚硝酸盐和氨氮转化为氮气从而缩短氨氮转化的过程,它已经成为新型生物污水脱氮技术研究的热点之一。当前,有关厌氧氨氧化菌特有的生理结构特点、种群分类及其功能酶等方面的研究取得了一定突破,为实现其工业应用奠定了良好的理论基础;同时分子生物学技术在厌氧氨氧化细菌种群分布、群落多样性及其共生关系等方面的应用也大大促进了污水生物脱氮技术的革新和进步。总结了厌氧氨氧化菌主要的生理生化特点、细胞结构特点、脱氮机理、污水处理体系中的应用以及分子生物学方法对污水处理体系中厌氧氨氧化菌种群分析的研究现状,并指出未来anammox细菌在生物特性及在污水脱氮处理实际应用的研究中的热点问题。生物特性方面的主要研究热点有：（1）anammox细菌除厌氧氨氧化作用外,其它新陈代谢途径有待探索;（2）anammox细菌在不同环境中分布的倾向性问题;（3）新型anammox细菌的确定。污水处理的实际应用方面的主要研究热点有：（1）anammox污泥的快速高效富集问题;（2）设计高特异性引物;（3）anammox细菌和其他微生物的共生关系。     

保藏温度对厌氧氨氧化颗粒污泥特性的影响

为考察保藏温度对厌氧氨氧化污泥颗粒特性的影响,同时优化保藏厌氧氨氧化颗粒污泥温度参数,本试验首先通过HRT调控进水基质负荷培养厌氧氨氧化颗粒污泥,并采用KHCO3和Na HCO3交替提供无机碳源。然后分别在–40℃、4℃、(27±4)℃室温和35℃条件下避光保藏。结果表明,Na HCO3可代替KHCO3作为厌氧氨氧化菌生长的无机碳源。相比于其他保藏温度,4℃保藏能够较好地维持生物量和生物活性,同时能较好地维持颗粒污泥的沉降性能、颗粒污泥和细胞结构完整性。在保藏过程中,一阶衰减指数模型可拟合厌氧氨氧化颗粒污泥生物量及活性的衰减过程,衰减指数与胞溶程度正相关,而且生物量的衰减比活性的衰减更快。同时,颗粒污泥胞外聚合物中蛋白质与多糖的比值(PN/PS)和血红素不能有效指示保藏过程中颗粒污泥沉降性能和活性的变化,而生物活性与胞溶程度呈负相关。     

Identification of bacteria coexisting with anammox bacteria in an upflow column type reactor

Anammox process has attracted considerable attention in the recent years as an alternative to conventional nitrogen removal technologies. In this study, a column type reactor using a novel net type acrylic fiber (Biofix) support material was used for anammox treatment. The Biofix reactor was operated at a temperature of 25°C (peak summer temperature, 31.5°C). During more than 340 days of operation for synthetic wastewater treatment, the nitrogen loading rates of the reactor were increased to 3.6 kg-N/m³/d with TN removal efficiencies reaching 81.3%. When the reactor was used for raw anaerobic sludge digester liquor treatment, an average TN removal efficiency of 72% was obtained with highest removal efficiency of 81.6% at a nitrogen loading rate of 2.2 kg-N/m³/d. Results of extracellular polymeric substances (EPS) quantification revealed that protein was the most abundant component in the granular sludge and was found to be almost twice than that in the sludge attached to the biomass carriers. The anammox granules in the Biofix reactor illustrated a dense morphology substantiated by scanning electron microscopy and EPS results. The results of DNA analyses indicated that the anammox strain KSU-1 might prefer relatively low nutrient levels, while the anammox strain KU2 strain might be better suited at high nutrient concentration. Other types of bacteria were also identified with the potential of consuming dissolved oxygen in the influent and facilitating survival of anammox bacteria under aerobic conditions.     

Fast start-up, performance and microbial community in a pilot-scale anammox reactor seeded with exotic mature granules

The possibility to introduce the exotic anammox sludge to seed the pilot-scale anammox granular reactor and its fast start-up for treating high nitrogen concentration wastewater were evaluated in this study. The reactor was started up successfully in two weeks; in addition, high nitrogen removal was achieved for a long period. Stoichiometry molar ratios of nitrite conversion and nitrate production to ammonium conversion were calculated to be 1.26 ± 0.02:1 and 0.26 ± 0.01:1, respectively. The Stover-Kincannon model which was first applied in granular anammox process indicated that the granular anammox reactor possessed high nitrogen removal potential of 27.8 kg/m³/d. The anammox granules in the reactor were characterized via microscope observation and fluorescence in situ hybridization technique. Moreover, the microbial community of the granules was quantified to be composed of 91.4-92.4% anammox bacteria by real-time polymerase chain reaction. This pilot study can elucidate further information for industrial granular anammox application.     

厌氧氨氧化菌的中心代谢研究进展

摘要: 厌氧氨氧化是以NH +4为电子供体,以NO－2为电子受体产生N2的生物反应。厌氧氨氧化菌是厌氧氨氧化过程的执行者,在废水生物脱氮和地球氮素循环中扮演着重要角色。研究厌氧氨氧化菌的代谢特性,将有助于理解厌氧氨氧化过程,开发厌氧氨氧化工艺。厌氧氨氧化菌是化能自养型细菌,以CO2或HCO－3为碳源,并通过偶联NH+4氧化和NO －2还原的生物反应获得能量。在NH+4/NO－2的生物氧化还原反应过程中,检出了中间产物N2H4,但未检出其他中间产物(如NH2OH、NO)。此外,由基因组信息推断,厌氧氨氧化菌     

厌氧铵氧化过程中关键酶及相关分子标记在生态学研究中的应用进展

厌氧铵氧化是由微生物介导的氮素循环过程中的重要途径之一。近20年来,通过对厌氧铵氧化细菌生态学、基因组学和生理代谢特性的探索,人们对其微生物学机制已经有了较多的认识:厌氧铵氧化细菌通过亚硝酸盐还原酶将亚硝酸根离子还原为一氧化氮,进而与铵离子结合在联氨合成酶的作用下生成联氨,最后通过联氨氧化酶的催化产生终产物氮气。同时,对参与这些过程的关键酶及其功能基因的认识有助于选择新的分子标记,从而为研究厌氧铵氧化细菌的多样性和分子生态学特征提供新的工具,以弥补16S rRNA基因特异性相对较低且难以与生态功能关联等方面的不足。对目前已知的参与厌氧铵氧化过程的3种关键酶的研究历程和现状进行了评述,并总结了利用3种功能基因进行厌氧铵氧化细菌生态学研究的最新进展。     

Combined anaerobic ammonium and methane oxidation for nitrogen and methane removal

Anammox (anaerobic ammonium oxidation) is an environment-friendly and cost-efficient nitrogen-removal process currently applied to high-ammonium-loaded wastewaters such as anaerobic digester effluents. In these wastewaters, dissolved methane is also present and should be removed to prevent greenhouse gas emissions into the environment. Potentially, another recently discovered microbial pathway, n-damo (nitrite-dependent anaerobic methane oxidation) could be used for this purpose. In the present paper, we explore the feasibility of simultaneously removing methane and ammonium anaerobically, starting with granules from a full-scale anammox bioreactor. We describe the development of a co-culture of anammox and n-damo bacteria using a medium containing methane, ammonium and nitrite. The results are discussed in the context of other recent studies on the application of anaerobic methane- and ammonia-oxidizing bacteria for wastewater treatment.     

Reactivation of effluent granular sludge from a high-rate Anammox reactor after storage

In this study, effluent sludge from a high-rate Anammox reactor was used to re-start new Anammox reactors for the reactivation of Anammox granular sludge. Different start-up strategies were evaluated in six upflow anaerobic sludge blanket (UASB) reactors (R₁–R₆) for their effect on nitrogen removal performance. Maximal nitrogen removal rates (NRRs) greater than 20 kg N/m³/day were obtained in reactors R₃–R₅, which were seeded with mixed Anammox sludge previously stored for approximately 6 months and 1 month. A modified Boltzmann model describing the evolution of the NRR fit the experimental data well. An amount of sludge added to the UASB reactor or decreasing the loading rate proved effective in relieving the substrate inhibition and increasing the NRR. The modified Stover–Kincannon model fit the nitrogen removal data in the Anammox reactors well, and the simulation results showed that the Anammox process has great nitrogen removal potential. The observed inhibition in the Anammox reactors may have been caused by high levels of free ammonia. The sludge used to seed the reactors did not settle well; sludge flotation was observed even after the reactors were operated for a long time at a floating upward velocity (F_s) of greater than 100 m/h. The settling sludge, however, exhibited good settling properties. Scanning electron microscopy showed that the Anammox granules consisted mainly of spherical and elliptical bacteria with abundant filaments on their surface. Hollows in the granules were also present, which may have contributed to sludge floatation.     

Ecological characteristics of anaerobic ammonia oxidizing bacteria

Anaerobic ammonium oxidation (anammox) is the microbial conversion of ammonium and nitrite to dinitrogen gas. The functional microbes of anammox reaction are anammox bacteria, which were discovered in a wastewater treatment system for nitrogen removal. Anammox bacteria are prevalent in anoxic ecosystems and play an important role in both biological nitrogen cycle and nitrogen pollution control. In this paper, we reviewed the investigation on ecological characteristics of anammox bacteria, and tried to figure out their complicated intraspecies and interspecies relationships. As for intraspecies relationship, we focused on the quorum sensing system, a cell density-dependent phenomenon. As for interspecies relationship, we focused on the synergism and competition of anammox bacteria with other microorganisms for substrate and space. Finally, we discussed the great influence of environmental factors (e.g., dissolved oxygen, organic matters) on the constitution, structure and function of anammox bacteria community.