Catalytic residues and substrate specificity of recombinant human tripeptidyl peptidase I (CLN2)

Tripeptidyl peptidase I (TTP-I), also known as CLN2, a member of the family of serine-carboxyl proteinases (S53), plays a crucial role in lysosomal protein degradation and a deficiency in this enzyme leads to fatal neurodegenerative disease. Recombinant human TPP-I and its mutants were analyzed in order to clarify the biochemical role of TPP-I and its mechanism of activity. Ser280, Glu77, and Asp81 were identified as the catalytic residues based on mutational analyses, inhibition studies, and sequence similarities with other family members. TPP-I hydrolyzed most effectively the peptide Ala-Arg-Phe*Nph-Arg-Leu (*, cleavage site) (k(cat)/K(m) = 2.94 microM(-1).s(-1)). The k(cat)/K(m) value for this substrate was 40 times higher than that for Ala-Ala-Phe-MCA. Coupled with other data, these results strongly suggest that the substrate-binding cleft of TPP-I is composed of only six subsites (S(3)-S(3)'). TPP-I prefers bulky and hydrophobic amino acid residues at the P(1) position and Ala, Arg, or Asp at the P(2) position. Hydrophilic interactions at the S(2) subsite are necessary for TPP-I, and this feature is unique among serine-carboxyl proteinases. TPP-I might have evolved from an ancestral gene in order to cleave, in cooperation with cathepsins, useless proteins in the lysosomal compartment.     

How signal sequences maintain cleavage specificity

The specificity of the signal sequence cleavage reaction has been postulated to reside in a signal peptidase active site that can bind only to particular (i, i + 2) pairs of amino acids. In this paper, we present further patterns of non-random amino acid utilization in a region around in vivo cleavage sites, and show that they can be interpreted in terms of selection acting to reduce the number of potential competing sites in the vicinity of the correct one.     

Primary structure of bovine endothelin ETB receptor and identification of signal peptidase and metal proteinase cleavage sites.

A cDNA clone corresponding to the entire coding region of the bovine ETB endothelin receptor mRNA was isolated from a lung cDNA library and sequenced. The cDNA encodes 441 amino acids: 26 constituting an NH2-terminal signal peptide and 415 constituting the mature receptor. The signal peptidase cleavage site was determined by direct amino acid sequencing of purified receptor. A comparison of the predicted amino acid sequence with the available bovine ETA and rat ETB endothelin receptor sequences revealed 63 and 85% homology, respectively. Endothelin receptors of various species are known to be very sensitive to a certain metal proteinase(s) and have been shown to be converted to a lower Mr form in the absence of EDTA. The metal proteinase cleavage site was also determined by direct protein sequencing of the proteolysis product. The amino acid sequence (Ala-Gly-X-Pro-Pro-Arg) surrounding the cleavage site (between Ala-79 and Gly-80) is conserved among the ETB endothelin receptors, explaining the above mentioned proteolytic conversion from the higher to lower Mr forms observed in various species.     

Pim kinase substrate identification and specificity

The Pim family of Ser/Thr kinases has been implicated in the process of lymphomagenesis and cell survival. Known substrates of Pim kinases are few and poorly characterized. In this study we set out to identify novel Pim-2 substrates using the Kinase Substrate Tracking and Elucidation (KESTREL) approach. Two potential substrates, eukaryotic initiation factor 4B (eIF4B) and apoptosis inhibitor 5 (API-5), were identified from rat thymus extracts. Sequence comparison of the Pim-2 kinase phosphorylation sites of eIF4B and mouse BAD, the only other known Pim-2 substrate, revealed conserved amino acids preceding the phosphorylated serine residue. Stepwise replacement of the conserved residues produced a consensus sequence for Pim kinase recognition: RXRHXS. Pim-1 and Pim-2 catalyzed the phosphorylation of this recognition sequence 20-fold more efficiently than the original (K/R-K/R-R-K/R-L-S/T-a; a = small chain amino acid) Pim-1 phosphorylation site. The identification of the novel Pim kinase consensus sequence provides a more sensitive and versatile peptide based assay for screening modulators of Pim kinase activity.     

Purification, substrate specificity, and classification of tripeptidyl peptidase II

An extralysosomal tripeptide-releasing aminopeptidase was recently discovered in rat liver (B?l?w, R.-M., Ragnarsson, U., and Zetterqvist, O. (1983) J. Biol. Chem. 258, 11622-11628). In the present work this tripeptidyl peptidase is shown to occur in several rat tissues and in human erythrocytes. The erythrocyte enzyme was purified about 80,000-fold from a hemolysate while the rat liver enzyme was purified about 4,000-fold from a homogenate. Upon polyacrylamide gel electrophoresis in sodium dodecyl sulfate under reducing conditions more than 90% of the protein was represented by a polypeptide of Mr 135,000 in both cases. In addition, the two enzymes eluted at similar positions in the various chromatographic steps, showed similar specific activity, and had a pH optimum around 7.5. A tryptic pentadecapeptide from the alpha-chain of human hemoglobin, Val-Gly-Ala-His-Ala-Gly-Glu-Tyr-Gly-Ala-Glu-Ala-Leu-Glu-Arg, i.e. residues 17-31, was found to be sequentially cleaved by the erythrocyte enzyme into five tripeptides, beginning from the NH2 terminus. Chromogenic tripeptidylamides showed various rates of hydrolysis at pH 7.5. With Ala-Ala-Phe-4-methyl-7-coumarylamide, Km was 16 microM and Vmax 13 mumol min-1 . mg-1, comparable to the standard substrate Arg-Arg-Ala-Ser(32P)-Val-Ala values (Km 13 microM and Vmax 24 mumol . min-1 . mg-1). The tripeptidyl peptidase of human erythrocytes was classified as a serine peptidase from its irreversible inhibition by phenylmethanesulfonyl fluoride and diisopropyl fluorophosphate. The rate of inhibition was decreased by the presence of an efficient competitive inhibitor, Val-Leu-Arg-Arg-Ala-Ser-Val-Ala (Ki 1.5 microM). [3H]Diisopropylphosphate was incorporated to the extent of 0.7-0.9 mol/mol of Mr 135,000 subunit, which confirms the high purity of the enzyme.     

Factors governing nonoverlapping substrate specificity by mitochondrial inner membrane peptidase

At least three peptidases are involved in cleaving presequences from imported mitochondrial proteins. One of the peptidase, the inner membrane peptidase, has two catalytic subunits, Imp1p and Imp2p, which are structurally related but functionally distinct in the yeast Saccharomyces cerevisiae. Whereas both subunits are members of the type I signal peptidase family, they exhibit nonoverlapping substrate specificities. A clue to the substrate specificity mechanism has come from our discovery of the importance not only of the -1 and -3 residues in the signal peptides cleaved by Imp1p and Imp2p but also the +1 cargo residues attached to the signal peptides. We specifically find that Imp1p prefers substrates having a negatively charged residue (Asp or Glu) at the +1 position, whereas Imp2p prefers substrates having the Met residue at the +1 position. We further suggest that the conformation of the cargo is important for substrate recognition by Imp2p. A role for the cargo in presequence recognition distinguishes Imp1p and Imp2p from other type I signal peptidases.     

Peptide products of the cleavage of bovine preprolactin by signal peptidase

Cleavage of preprolactin (pPL) by detergent-solubilized signal peptidase produced mature prolactin and two small peptides derived from the signal peptide region of the pPL molecule. The production of both peptides was dependent on functional signal peptidase; the peptides were not generated at detergent concentrations that abolished signal peptidase activity. The amount of both peptides was proportional to the concentration of signal peptidase in the assay. The appearance of both peptides was insensitive to protease inhibitors, as was signal peptidase activity. The size, labeling characteristics, and amino acid sequence of the larger peptide, peptide 1, corresponded to those of the intact signal peptide of pPL. The smaller peptide, peptide 2, lacked the carboxy terminus of the signal peptide, and was, therefore, a fragment of intact signal peptide. These results demonstrate the endoproteolytic nature of signal peptidase.     

Minimum substrate sequence for signal peptidase I of Escherichia coli

The minimum substrate sequence recognized by signal peptidase I (SPase I or leader peptidase) was defined by measuring the kinetic parameters for a set of chemically synthesized peptides corresponding to the cleavage site of the precursor maltose binding protein (pro-MBP). The minimum sequence of a substrate hydrolyzed by SPase I at a measurable rate was the pentapeptide Ala-Leu-Ala decreases Lys-Ile. The rates of hydrolysis of this substrate, however, were several hundred-fold lower than those observed for the maturation of MBP in Escherichia coli, suggesting that in addition to these minimal sites involved in recognition, other features of pro-MBP are also needed for the optimal rate of signal peptide cleavage by SPase I. One parameter may be the length of the polypeptide chain. Studies of the synthetic peptides showed that decreasing the length of the polypeptide chain of substrates decreased the substrate efficiency measured as kcat/Km. However, in one case a decrease in the length of a peptide corresponding to -7 to +3 positions of pro-MBP to a nonapeptide (-7 to +2) increased the substrate efficiency by about 900-fold. The nonapeptide is the most efficient substrate for the enzyme in vitro so far reported. It is speculated that better peptide substrates are the ones which are able to adopt folded structures.     

Structure of the human signal peptidase complex reveals the determinants for signal peptide cleavage

1. Download : Download high-res image (350KB)
2. Download : Download full-size image

     

Membrane topology and identification of key residues of EaDAcT,a plant MBOAT with unusual substrate specificity

Euonymus alatus diacylglycerol acetyltransferase (EaDAcT) catalyzes the transfer of an acetyl group from acetyl‐CoA to the sn‐3 position of diacylglycerol to form 3‐acetyl‐1,2‐diacyl‐sn‐glycerol (acetyl‐TAG). EaDAcT belongs to a small, plant‐specific subfamily of the membrane bound O‐acyltransferases (MBOAT) that acylate different lipid substrates. Sucrose gradient density centrifugation revealed that EaDAcT colocalizes to the same fractions as an endoplasmic reticulum (ER)‐specific marker. By mapping the membrane topology of EaDAcT, we obtained an experimentally determined topology model for a plant MBOAT. The EaDAcT model contains four transmembrane domains (TMDs), with both the N‐ and C‐termini orientated toward the lumen of the ER. In addition, there is a large cytoplasmic loop between the first and second TMDs, with the MBOAT signature region of the protein embedded in the third TMD close to the interface between the membrane and the cytoplasm. During topology mapping, we discovered two cysteine residues (C187 and C293) located on opposite sides of the membrane that are important for enzyme activity. In order to identify additional amino acid residues important for acetyltransferase activity, we isolated and characterized acetyltransferases from other acetyl‐TAG‐producing plants. Among them, the acetyltransferase from Euonymus fortunei possessed the highest activity in vivo and in vitro. Mutagenesis of conserved amino acids revealed that S253, H257, D258 and V263 are essential for EaDAcT activity. Alteration of residues unique to the acetyltransferases did not alter the unique acyl donor specificity of EaDAcT, suggesting that multiple amino acids are important for substrate recognition.     

Analysis of type I signal peptidase affinity and specificity for preprotein substrates

Type I signal peptidases (SPases) are membrane-bound endopeptidases responsible for the catalytic cleavage of signal peptides from secretory proteins. Here, we analysed the interaction between a bacterial type I SPase and preprotein substrates using surface plasmon resonance. The use of a home-made biosensor surface based on a mixed self-assembled monolayer of thiols on gold allowed qualitative and kinetic analysis. In vitro binding of purified preproteins to a covalently immobilised bacterial SPase was found to be rather efficient (apparent K(D)=10(-7)-10(-8)M). The signal peptide was shown to be a prerequisite for SPase binding and the nature of the mature part of the preprotein significantly affected SPase binding affinity. The developed biosensor containing immobilised SPase is of great importance for analysis of specificity at substrate binding level and for drug screening. In fact, this is the first report of a membrane protein that was covalently attached to a biosensor surface and that retained binding capacity.     

Detection of anticodon nuclease residues involved in tRNALys cleavage specificity

The tRNALys-specific anticodon nuclease exists in latent form in Escherichia coli strains containing the optional prr locus. The latency is a result of a masking interaction between the anticodon nuclease core-polypeptide PrrC and the Type IC DNA restriction-modification enzyme EcoprrI. Activation of the latent enzyme by phage T4-infection elicits cleavage of tRNALys 5' to the wobble base, yielding 5'-OH and 2', 3'-cyclic phosphate termini. The N-proximal half of PrrC has been implicated with (A/G) TPase and EcoprrI interfacing activities. Therefore, residues involved in recognition and cleavage of tRNALys were searched for at the C-half. Random mutagenesis of the low-G+C portion encoding PrrC residues 200-313 was performed, followed by selection for loss of anticodon nuclease-dependent lethality and production of full-sized PrrC-like protein. This process yielded a cluster of missense mutations mapping to a region highly conserved between PrrC and two putative Neisseria meningitidis MC58 homologues. This cluster included two adjacent members that relaxed the inherent enzyme's cleavage specificity. We also describe another mode of relaxed specificity, due to mere overexpression of PrrC. This mode was shared by wild-type PrrC and the other mutant alleles. The additional substrates recognised under the promiscuous conditions had, in general, anticodons resembling that of tRNALys. Taken together, the data suggest that the anticodon of tRNALys harbours anticodon nuclease identity elements and implicates a conserved region in PrrC in their recognition.     

Conserved residues of the leader peptide are essential for cleavage by leader peptidase

Gene 8 of bacteriophage M13 codes for procoat, the precursor of its major coat protein. Gene 8 has been cloned into a plasmid and mutagenized. We have isolated mutants of this gene in which procoat is synthesized but is not processed to coat protein. We now describe mutants in the leader region of procoat, at positions -6, -3, and -1 with respect to the leader peptidase cleavage site. These positions are quite conserved among the leader peptides of various pre-proteins. Each of these mutant procoats is synthesized at a normal rate and inserts correctly into the plasma membrane, as judged by its accessibility to protease in intact spheroplasts. Procoat accumulates, largely in its transmembrane form, and is not cleaved to coat. In detergent extracts, the mutant procoats are very poor substrates for added leader peptidase. We conclude that these 3 residues are not conserved for insertion across the membrane but are part of an essential recognition site for the leader peptidase.     

Altered -3 substrate specificity of Escherichia coli signal peptidase 1 mutants as revealed by screening a combinatorial peptide library

Signal peptidase functions to cleave signal peptides from preproteins at the cell membrane. It has a substrate specificity for small uncharged residues at -1 (P1) and aliphatic residues at the -3 (P3) position. Previously, we have reported that certain alterations of the Ile-144 and Ile-86 residues in Escherichia coli signal peptidase I (SPase) can change the specificity such that signal peptidase is able to cleave pro-OmpA nuclease A in vitro after phenylalanine or asparagine residues at the -1 position (Karla, A., Lively, M. O., Paetzel, M. and Dalbey, R. (2005) J. Biol. Chem. 280, 6731-6741). In this study, screening of a fluorescence resonance energy transfer-based peptide library revealed that the I144A, I144C, and I144C/I86T SPase mutants have a more relaxed substrate specificity at the -3 position, in comparison to the wild-type SPase. The double mutant tolerated arginine, glutamine, and tyrosine residues at the -3 position of the substrate. The altered specificity of the I144C/I86T mutant was confirmed by in vivo processing of pre-beta-lactamase containing non-canonical arginine and glutamine residues at the -3 position. This work establishes Ile-144 and Ile-86 as key P3 substrate specificity determinants for signal peptidase I and demonstrates the power of the fluorescence resonance energy transfer-based peptide library approach in defining the substrate specificity of proteases.     

Dipeptidyl peptidase with strict substrate specificity of an anaerobic periodontopathogen Porphyromonas gingivalis

A dipeptidyl peptidase which hydrolyzed Xaa-Ala-p-nitroanilide was purified to homogeneity by sequential procedures including ammonium sulfate precipitation, ion-exchange chromatography, hydrophobic interaction chromatography, gel filtration and isoelectric focusing from the cell extract of Porphyromonas gingivalis. The purified enzyme hydrolyzed p-nitroanilide derivatives of Lys-Ala, Ala-Ala, and Val-Ala, but not Xaa-Pro. Enzyme activity was maximum at neutral pHs. Its molecular mass was 64 kDa with an isoelectric point of 5.7. The enzyme belonged to the family of serine peptidases.     

Site-directed mutagenesis of human membrane-associated ganglioside sialidase: identification of amino-acid residues contributing to substrate specificity.

Unlike microbial sialidases, mammalian sialidases possess strict substrate specificity, for example the human membrane-associated sialidase, which hydrolyzes only gangliosides. To cast light on the molecular basis of this narrow substrate preference, predicted active site amino-acid residues of the human membrane sialidase were altered by site-directed mutagenesis. When compared with the active site amino-acid residues proposed for Salmonella typhimurium sialidase, only five out of 13 residues were found to be different to the human enzyme, these being located upstream of the putative transmembrane region. Alteration of seven residues, including these five, was followed by transient expression of the mutant enzymes in COS-1 cells and characterization of their kinetic properties using various substrates. Substitution of glutamic acid (at position 51) by aspartic acid and of arginine (at position 114) by glutamine or alanine resulted in retention of good catalytic efficiency toward ganglioside substrates, whereas other substitutions caused a marked reduction. The mutant enzyme E51D exhibited an increase in hydrolytic activity towards GM2 as well as sialyllactose (which are poor substrates for the wild-type) with change to a lower Km and a higher Vmax. R114Q demonstrated a substrate specificity shift in the same direction as E51D, whereas R114A enhanced the preference for gangliosides GD3 and GD1a that are effectively hydrolyzed by the wild-type. The inhibition experiments using 2-deoxy-2,3-didehydro-N-acetylneuraminic acid were consistent with the results in the alteration of substrate specificity. The findings suggest that putative active-site residues of the human membrane sialidase contribute to its substrate specificity.