Mutations in the major gas vesicle protein GvpA and impacts on gas vesicle formation in Haloferax volcanii

Gas vesicles are proteinaceous, gas‐filled nanostructures produced by some bacteria and archaea. The hydrophobic major structural protein GvpA forms the ribbed gas vesicle wall. An in‐silico 3D‐model of GvpA of the predicted coil‐α1‐β1‐β2‐α2‐coil structure is available and implies that the two β‐chains constitute the hydrophobic interior surface of the gas vesicle wall. To test the importance of individual amino acids in GvpA we performed 85 single substitutions and analyzed these variants in Haloferax volcanii ΔA + A_mut transformants for their ability to form gas vesicles (Vac⁺ phenotype). In most cases, an alanine substitution of a non‐polar residue did not abolish gas vesicle formation, but the replacement of single non‐polar by charged residues in β1 or β2 resulted in Vac^– transformants. A replacement of residues near the β‐turn altered the spindle‐shape to a cylindrical morphology of the gas vesicles. Vac^– transformants were also obtained with alanine substitutions of charged residues of helix α1 suggesting that these amino acids form salt‐bridges with another GvpA monomer. In helix α2, only the alanine substitution of His53 or Tyr54, led to Vac^– transformants, whereas most other substitutions had no effect. We discuss our results in respect to the GvpA structure and data available from solid‐state NMR.     

Modeling of the major gas vesicle protein, GvpA: from protein sequence to vesicle wall structure

The structure and assembly process of gas vesicles have received significant attention in recent decades, although relatively little is still known. This work combines state-of-the-art computational methods to develop a model for the major gas vesicle protein, GvpA, and explore its structure within the assembled vesicle. Elucidating this protein's structure has been challenging due to its adherent and aggregative nature, which has so far precluded in-depth biochemical analyses. Moreover, GvpA has extremely low similarity with any known protein structure, which renders homology modeling methods ineffective. Thus, alternate approaches were used to model its tertiary structure. Starting with the sequence from haloarchaeon Halobacterium sp. NRC-1, we performed ab initio modeling and threading to acquire a multitude of structure decoys, which were equilibrated and ranked using molecular dynamics and mechanics, respectively. The highest ranked predictions exhibited an α-β-β-α secondary structure in agreement with earlier experimental findings, as well as with our own secondary structure predictions. Afterwards, GvpA subunits were docked in a quasi-periodic arrangement to investigate the assembly of the vesicle wall and to conduct simulations of contact-mode atomic force microscopy imaging, which allowed us to reconcile the structure predictions with the available experimental data. Finally, the GvpA structure for two representative organisms, Anabaena flos-aquae and Calothrix sp. PCC 7601, was also predicted, which reproduced the major features of our GvpA model, supporting the expectation that homologous GvpA sequences synthesized by different organisms should exhibit similar structures.     

Solid-State NMR Characterization of Gas Vesicle Structure

Gas vesicles are gas-filled buoyancy organelles with walls that consist almost exclusively of gas vesicle protein A (GvpA). Intact, collapsed gas vesicles from the cyanobacterium Anabaena flos-aquae were studied by solid-state NMR spectroscopy, and most of the GvpA sequence was assigned. Chemical shift analysis indicates a coil-α-β-β-α-coil peptide backbone, consistent with secondary-structure-prediction algorithms, and complementary information about mobility and solvent exposure yields a picture of the overall topology of the vesicle subunit that is consistent with its role in stabilizing an air-water interface.     

The sequence of the major gas vesicle protein,GvpA, influences the width and strength of halobacterial gas vesicles

Transformation experiments with Haloferax volcanii show that the amino acid sequence of the gas vesicle protein GvpA influences the morphology and strength of gas vesicles produced by halophilic archaea. A modified expression vector containing p-gvpA was used to complement a Vac(-) strain of Hfx. volcanii that harboured the entire p-vac region (from Halobacterium salinarum PHH1) except for p-gvpA. Replacement of p-gvpA with mc-gvpA (from Haloferax mediterranei) led to the synthesis of gas vesicles that were narrower and stronger. Other gene replacements (using c-gvpA from Hbt. salinarum or mutated p-gvpA sequences) led to a significant but smaller increase in gas vesicle strength, and less marked effects on gas vesicle morphology.     

Distribution, formation and regulation of gas vesicles

A range of bacteria and archaea produce intracellular gas-filled proteinaceous structures that function as flotation devices in order to maintain a suitable depth in the aqueous environment. The wall of these gas vesicles is freely permeable to gas molecules and is composed of a small hydrophobic protein, GvpA, which forms a single-layer wall. In addition, several minor structural, accessory or regulatory proteins are required for gas vesicle formation. In different organisms, 8-14 genes encoding gas vesicle proteins have been identified, and their expression has been shown to be regulated by environmental factors. In this Review, I describe the basic properties of gas vesicles, the genes that encode them and how their production is regulated. I also discuss the function of these vesicles and the initial attempts to exploit them for biotechnological purposes.     

Solid-State NMR Evidence for Inequivalent GvpA Subunits in Gas Vesicles

Gas vesicles are organelles that provide buoyancy to the aquatic microorganisms that harbor them. The gas vesicle shell consists almost exclusively of the hydrophobic 70-residue gas vesicle protein A, arranged in an ordered array. Solid-state NMR spectra of intact collapsed gas vesicles from the cyanobacterium Anabaena flos-aquae show duplication of certain gas vesicle protein A resonances, indicating that specific sites experience at least two different local environments. Interpretation of these results in terms of an asymmetric dimer repeat unit can reconcile otherwise conflicting features of the primary, secondary, tertiary, and quaternary structures of the gas vesicle protein. In particular, the asymmetric dimer can explain how the hydrogen bonds in the β-sheet portion of the molecule can be oriented optimally for strength while promoting stabilizing aromatic and electrostatic side-chain interactions among highly conserved residues and creating a large hydrophobic surface suitable for preventing water condensation inside the vesicle.     

The homologies of gas vesicle proteins.

In addition to GvpA, the main structural protein, an SDS-soluble protein has been found in gas vesicles isolated from six different genera of cyanobacteria. N-terminal sequence analysis of the first 30 to 60 residues of the gel-purified proteins showed that they were homologous to GvpC, a protein that strengthens the gas vesicle in Anabaena flos-aquae. The proteins from some of the organisms showed rather low homology, however, and this may explain why the genes that encode them have not been found by Southern hybridization studies. The gas vesicles of another cyanobacterium, Dactylococcopsis salina, contained two SDS-soluble proteins (M(r) 17,000 and 35,000) that were identical in sequence for the first 24 residues but not thereafter; these two proteins showed no clear homology to GvpC. The sequence of GvpA, the main structural gas vesicle protein, was very similar in each of the organisms investigated. GvpA from the purple bacterium Amoebobacter pendens was different for the first 8 residues but 51 of the next 56 residues were identical to those of the cyanobacterial GvpA. Analysis of the GvpA and GvpC sequences provides support for the idea that the low diversity of GvpA reflects a high degree of conservation rather than a recent origin followed by lateral gene transfer between different bacteria.     

Functional analysis of the gas vesicle gene cluster of the halophilic archaeon Haloferax mediterranei defines the vac-region boundary and suggests a regulatory role for the gvpD gene or its product

A series of deletions introduced into the gvp gene cluster of Haloferax mediterranei, comprising 14 genes involved in gas vesicle synthesis (mc-vac-region), was investigated by transformation experiments. Gas vesicle production and the expression of the gvpA gene encoding the major gas vesicle protein, GvpA, was monitored in each Haloferax volcanii transformant. Whereas transformants containing the entire mc-vac-region produced gas vesicles (Vac+), various deletions in the region 5' to gvpA (encompassing gvpD-gvpM) or 3' to gvpA (containing gvpC, gvpN and gvpO) revealed Vac- transformants. All these transformants expressed gvpA and contained the 8 kDa GvpA protein as shown by Western analysis. However, transformants containing the gvpA gene by itself indicated a lower level of GvpA than observed with each of the other transformants. None of these transformants containing deletion constructs assembled the GvpA protein into gas vesicles. In contrast, transformants containing a construct carrying a 918 bp deletion internal to gvpD exhibited a tremendous gas vesicle overproduction, suggesting a regulatory role for the gvpD gene or its product. This is the first assignment of a functional role for one of the 13 halobacterial gvp genes found in addition to gvpA that are involved in the synthesis of this unique structure.     

Gas vesicles isolated from Halobacterium cells by lysis in hypotonic solution are structurally weakened

Analysis of pressure-collapse curves of Halobacterium cells containing gas vesicles and of gas vesicles released from such cells by hypotonic lysis shows that the isolated gas vesicles are considerably weaker than those present within the cells: their mean critical collapse pressure was around 0.049-0.058 MPa, as compared to 0.082-0.095 MPa for intact cells. The hypotonic lysis procedure, which is widely used for the isolation of gas vesicles from members of the Halobacteriaceae, thus damages the mechanical properties of the vesicles. The phenomenon can possibly be attributed to the loss of one or more structural gas vesicle proteins such as GvpC, the protein that strengthens the vesicles built of GvpA subunits: Halobacterium GvpC is a highly acidic, typically "halophilic" protein, expected to denature in the absence of molar concentrations of salt.     

蓝藻伪空胞的特性及浮力调节机制

伪空胞为蓝藻在水体中提供浮力,使其获得适宜的生长条件,最终导致蓝藻水华暴发,了解伪空胞的特征对控制蓝藻水华暴发有重要意义。文章简要回顾了蓝藻伪空胞自1865年被Klebahn发现到1965年被正式命名的研究历程,目前已发现150多种原核生物中含有伪空胞;伪空胞是两末端呈圆锥状的中空圆柱体,伪空胞半径与临界压强遵循方程:Pc=275(r/nm)-1.67MPa;伪空胞气体含量可根据不同原理,利用Walsby伪空胞测定装置、压力浊度计和细胞流式仪测得。总结了伪空胞组成的化学特性,评述了伪空胞gvp基因丛结构功能和GvpA、GvpC的蛋白空间结构。GvpA是伪空胞合成的主要成分,gvpA在伪空胞内存在多个拷贝,其功能仍不清楚;GvpC由33个氨基酸重复单位组成,重复单位越多,伪空胞越不易破裂;概述了伪空胞3种浮力调节机制:镇重物的改变、伪空胞的合成、伪空胞的破裂;归纳了环境因子(光照、温度、氮、磷、钾)参与伪空胞浮力网络调控的途径。提出了目前伪空胞研究面临的困难和问题,对伪空胞的未来研究方向提出探索性的建议。     

Structural and functional properties of peptides based on the N-terminus of HIV-1 gp41 and the C-terminus of the amyloid-beta protein

Given their high alanine and glycine levels, plaque formation, α-helix to β-sheet interconversion and fusogenicity, FP (i.e., the N-terminal fusion peptide of HIV-1 gp41; 23 residues) and amyloids were proposed as belonging to the same protein superfamily. Here, we further test whether FP may exhibit ‘amyloid-like’ characteristics, by contrasting its structural and functional properties with those of Aβ(26-42), a 17-residue peptide from the C-terminus of the amyloid-beta protein responsible for Alzheimer's. FTIR spectroscopy, electron microscopy, light scattering and predicted amyloid structure aggregation (PASTA) indicated that aqueous FP and Aβ(26-42) formed similar networked β-sheet fibrils, although the FP fibril interactions were weaker. FP and Aβ(26-42) both lysed and aggregated human erythrocytes, with the hemolysis-onsets correlated with the conversion of α-helix to β-sheet for each peptide in liposomes. Congo red (CR), a marker of amyloid plaques in situ, similarly inhibited either FP- or Aβ(26-42)-induced hemolysis, and surface plasmon resonance indicated that this may be due to direct CR-peptide binding. These findings suggest that membrane-bound β-sheets of FP may contribute to the cytopathicity of HIV in vivo through an amyloid-type mechanism, and support the classification of HIV-1 FP as an ‘amyloid homolog’ (or ‘amylog’).     

Gas vesicles.

The gas vesicle is a hollow structure made of protein. It usually has the form of a cylindrical tube closed by conical end caps. Gas vesicles occur in five phyla of the Bacteria and two groups of the Archaea, but they are mostly restricted to planktonic microorganisms, in which they provide buoyancy. By regulating their relative gas vesicle content aquatic microbes are able to perform vertical migrations. In slowly growing organisms such movements are made more efficiently than by swimming with flagella. The gas vesicle is impermeable to liquid water, but it is highly permeable to gases and is normally filled with air. It is a rigid structure of low compressibility, but it collapses flat under a certain critical pressure and buoyancy is then lost. Gas vesicles in different organisms vary in width, from 45 to > 200 nm; in accordance with engineering principles the narrower ones are stronger (have higher critical pressures) than wide ones, but they contain less gas space per wall volume and are therefore less efficient at providing buoyancy. A survey of gas-vacuolate cyanobacteria reveals that there has been natural selection for gas vesicles of the maximum width permitted by the pressure encountered in the natural environment, which is mainly determined by cell turgor pressure and water depth. Gas vesicle width is genetically determined, perhaps through the amino acid sequence of one of the constituent proteins. Up to 14 genes have been implicated in gas vesicle production, but so far the products of only two have been shown to be present in the gas vesicle: GvpA makes the ribs that form the structure, and GvpC binds to the outside of the ribs and stiffens the structure against collapse. The evolution of the gas vesicle is discussed in relation to the homologies of these proteins.     

Secondary structure perturbations in salt-induced protein precipitates

The secondary structure implications of precipitation induced by a chaotropic salt, KSCN, and a structure stabilizing salt, Na₂SO₄, were studied for twelve different proteins. α-helix and β-sheet content of precipitate and native structures were estimated from the analysis of amide I band Raman spectra. A statistical analysis of the estimated perturbations in the secondary structure contents indicated that the most significant event is the formation of β-sheet structures with a concomitant loss of α-helix on precipitation with KSCN. The conformational changes for each protein were also analyzed with respect to elements of primary, secondary and tertiary structure existing in the native protein; primary structure was quantified by the fractions of hydrophobic and charged amino acids, secondary structure by x-ray estimates of α-helix and β-sheet contents of native proteins and tertiary structure by the dipole moment and solvent-accessible surface area. For the KSCN precipitates, factors affecting β-sheet content included the fraction of charged amino acids in the primary sequence and the surface area. Changes in α-helix content were influenced by the initial helical content and the dipole moment. The enhanced β-sheet contents of precipitates observed in this work parallel protein structural changes occurring in other aggregative phenomena.     

肽键的统计分析和蛋白质的二级结构

 本文对蛋白质序列的肽键进行了统计分析,计算了二肽构象参数P_α、P_β、P_c和三肽构象参数Q_α、Q_β、Q_c。在此基础上提出了由氨基酸序列预测二级结构的规则。预测的正确率达90％,优于Chou-Fasman方法。这个结果表明二肽(三肽)关联在形成蛋白质二级结构中具有明显的重要性。     

Gas vesicles.

The gas vesicle is a hollow structure made of protein. It usually has the form of a cylindrical tube closed by conical end caps. Gas vesicles occur in five phyla of the Bacteria and two groups of the Archaea, but they are mostly restricted to planktonic microorganisms, in which they provide buoyancy. By regulating their relative gas vesicle content aquatic microbes are able to perform vertical migrations. In slowly growing organisms such movements are made more efficiently than by swimming with flagella. The gas vesicle is impermeable to liquid water, but it is highly permeable to gases and is normally filled with air. It is a rigid structure of low compressibility, but it collapses flat under a certain critical pressure and buoyancy is then lost. Gas vesicles in different organisms vary in width, from 45 to > 200 nm; in accordance with engineering principles the narrower ones are stronger (have higher critical pressures) than wide ones, but they contain less gas space per wall volume and are therefore less efficient at providing buoyancy. A survey of gas-vacuolate cyanobacteria reveals that there has been natural selection for gas vesicles of the maximum width permitted by the pressure encountered in the natural environment, which is mainly determined by cell turgor pressure and water depth. Gas vesicle width is genetically determined, perhaps through the amino acid sequence of one of the constituent proteins. Up to 14 genes have been implicated in gas vesicle production, but so far the products of only two have been shown to be present in the gas vesicle: GvpA makes the ribs that form the structure, and GvpC binds to the outside of the ribs and stiffens the structure against collapse. The evolution of the gas vesicle is discussed in relation to the homologies of these proteins.     

Complexity of gas vesicle biogenesis in Halobacterium sp. strain NRC-1: identification of five new proteins

The genome of Halobacterium sp. strain NRC-1 contains a large gene cluster, gvpMLKJIHGFEDACNO, that is both necessary and sufficient for the production of buoyant gas-filled vesicles. Due to the resistance of gas vesicles to solubilization, only the major gas vesicle protein GvpA and a single minor protein, GvpC, were previously detected. Here, we used immunoblotting analysis to probe for the presence of gas vesicle proteins corresponding to five additional gvp gene products. Polyclonal antisera were raised in rabbits against LacZ-GvpF, -GvpJ, and -GvpM fusion proteins and against synthetic 15-amino-acid peptides from GvpG and -L. Immunoblotting analysis was performed on cell lysates of wild-type Halobacterium sp. strain NRC-1, gas vesicle-deficient mutants, and purified gas vesicles, after purification of LacZ fusion antibodies on protein A and beta-galactosidase affinity columns. Our results show the presence of five new gas vesicle proteins (GvpF, GvpG, GvpJ, GvpL, and GvpM), bringing the total number of proteins identified in the organelles to seven. Two of the new gas vesicle proteins are similar to GvpA (GvpJ and GvpM), and two proteins contain predicted coiled-coil domains (GvpF and GvpL). GvpL exhibited a multiplet ladder on sodium dodecyl sulfate-polyacrylamide gels indicative of oligomerization and self-assembly. We discuss the possible functions of the newly discovered gas vesicle proteins in biogenesis of these unique prokaryotic flotation organelles.     

GvpCs with reduced numbers of repeating sequence elements bind to and strengthen cyanobacterial gas vesicles

We have previously shown that the gas-vesicle protein GvpC is present on the outer surface of the gas vesicle, can be reversibly removed and rebound to the surface, and increases the critical collapse pressure of the gas vesicle. The GvpC molecule, which contains five partially conserved repeats of 33 amino acids (33-RR) sandwiched between 18 N-terminal and 10 C-terminal amino acids, is present in a ratio of 1:25 with the GvpA molecule, which forms the ribs of the gas vesicle. By using recombinant techniques we have now made modified versions of GvpC that contain only the first two, three or four of the 33-amino-acid repeats. All of these proteins bind to and strengthen gas vesicles that have been stripped of their native GvpC. Recombinant proteins containing three or four repeats bind in amounts that give the same ratio of 33-RR:GvpA (i.e. 1:5) as the native protein, and they restore much of the strength of the gas vesicle; the protein containing only two repeats binds at a lower ratio (1:7.7), however, and restores less of the strength. Ancestral proteins with only two, three or four of the 33-amino-acid repeats would have been functional in strengthening the gas vesicle but the progressive increase in number of repeats would have provided strength with increased efficiency.     

Stoichiometry and Preferential Interaction: Two Components of the Principle for Protein Structure Organization

Abstract

The effect of pressure on the conformational structure of amyloid β (1–40) peptide (Aβ(1–40)), exacerbated with or without temperature, was determined by Fourier transform infrared (FT-IR) microspectroscopy. The result indicates the shift of the maximum peak of amide I band of intact solid Aβ(1–40) from 1655 cm^?1 (α-helix) to 1647–1643 cm^?1 (random coil) with the increase of the mechanical pressure. A new peak at 1634 cm^?1 assigned to β-antipar- allel sheet structure was also evident. Furthermore, the peak at 1540 cm^?1 also shifted to 1527 (1529) cm^?1 in amide II band. The former was assigned to the combination of α-helix and random coil structures, and the latter was due to β-sheet structure. Changes in the composition of each component in the deconvoluted and curve-fitted amide I band of the compressed Aβ(1–40) samples were obtained from 33% to 22% for α-helix/random coil structures and from 47% to 57% for β-sheet structure with the increase of pressure, respectively. This demonstrates that pressure might induce the conformational transition from α-helix to random coil and to β-sheet structure. The structural transformation of the compressed Aβ(1–40) samples was synergistically influenced by the combined effects of pressure and temperature. The thermal-induced formation of β-sheet structure was significantly dependent on the pressures applied. The smaller the pressure applied the faster the β-sheet structure transformed. The thermal-dependent transition temperatures of solid Aβ(1–40) prepared by different pressures were near 55–60 °C.     

Role of cholesterol in functional association between K(+)-Cl(-) cotransporter-3a and Na+,K(+)-ATPase

The conformation of amyloid-beta peptide (Aβ) determines if toxic aggregates are formed. The peptide structure by its turn depends on the environment and molecule-molecule interactions. We characterized the secondary structure of Aβ-(1-40) in surfactant solutions and interacting with monolayers. The peptide adopts β-sheet structure in solutions of ionic surfactants at sub-micelle concentrations and α-helix in the presence of ionic micelles. Uncharged micelles induce β-sheets. Aβ-(1-40) alters the critical micelle concentration value of the non-ionic surfactant, underlining hydrophobic interactions. At ionic monolayers the peptide forms β-sheets when its concentration at the surface is high enough. These results suggest that only electrostatic interactions of charged micelles that surround completely the peptide are able to induce non-aggregated α-helix structure.     

Folding simulations of three proteins having all α-helix,all β-strand and α/β-structures

We performed folding simulations of three proteins using four force fields, AMBER parm96, AMBER parm99, CHARMM 27 and OPLS-AA/L, in order to examine the features of these force fields. We studied three proteins, protein A (all α-helix), cold-shock protein (all β-strand) and protein G (α/β-structures), for the folding simulations. For the simulation, we used the simulated annealing molecular dynamics method, which was performed 50 times for each protein using the four force fields. The results showed that the secondary-structure-forming tendencies are largely different among the four force fields. AMBER parm96 favours β-bridge structures and extended β-strand structures, and AMBER parm99 favours α-helix structures and 3₁₀-helix structures. CHARMM 27 slightly favours α-helix structures, and there are also π-helix and β-bridge structures. OPLS-AA/L favours α-helix structures and 3₁₀-helix structures.