Hydroxylation of indole by laboratory-evolved 2-hydroxybiphenyl 3-monooxygenase

Directed enzyme evolution of 2-hydroxybiphenyl 3-monooxygenase (HbpA; EC ) from Pseudomonas azelaica HBP1 resulted in an enzyme variant (HbpA(ind)) that hydroxylates indole and indole derivatives such as hydroxyindoles and 5-bromoindole. The wild-type protein does not catalyze these reactions. HbpA(ind) contains amino acid substitutions D222V and V368A. The activity for indole hydroxylation was increased 18-fold in this variant. Concomitantly, the K(d) value for indole decreased from 1.5 mm to 78 microm. Investigation of the major reaction products of HbpA(ind) with indole revealed hydroxylation at the carbons of the pyrrole ring of the substrate. Subsequent enzyme-independent condensation and oxidation of the reaction products led to the formation of indigo and indirubin. The activity of the HbpA(ind) mutant monooxygenase for the natural substrate 2-hydroxybiphenyl was six times lower than that of the wild-type enzyme. In HbpA(ind), there was significantly increased uncoupling of NADH oxidation from 2-hydroxybiphenyl hydroxylation, which could be attributed to the substitution D222V. The position of Asp(222) in HbpA, the chemical properties of this residue, and the effects of its substitution indicate that Asp(222) is involved in substrate activation in HbpA.     

Synthesis of 3-tert-butylcatechol by an engineered monooxygenase

Recombinant Escherichia coli JM101 was used for the in vivo biocatalytic synthesis of 3-tert-butyl- catechol. The bacterial strain synthesized the laboratory-evolved variant HbpA(T2) of 2-hydroxybiphenyl 3-monooxygenase (HbpA, EC 1.14.13.44) from Pseudomonas azelaica HBP1. The mutant enzyme HbpA(T2) is able to hydroxylate 2-tert-butylphenol to the corresponding catechol, a reaction that is not catalyzed by the wild-type enzyme. The biotransformation was performed in a 3-L bioreactor for 24 h. To mitigate the toxicity of the 2-tert-butylphenol starting material, we applied a limited substrate feed. Continuous in situ product removal with the hydrophobic resin Amberlite XAD-4 was used to separate the product from culture broth. In addition, binding to the resin stabilized the product, which was important because 3-tert-butylcatechol is very labile in aqueous solution. The productivity of the process was 63 mg L(-1) h(-1) so that after 24 h, 3.0 g of 3-tert-butylcatechol were isolated. Down-stream processing consisted of two steps. First, bound 2-tert-butylphenol and 3-tert-butylcatechol were eluted from Amberlite XAD-4 with methanol. Second, the two compounds were separated over neutral aluminum oxide, which selectively binds the produced catechol but not the phenol substrate. The final purity of 3-tert-butylcatechol was greater than 98%.     

Catalytic mechanism of 2-hydroxybiphenyl 3-monooxygenase, a flavoprotein from Pseudomonas azelaica HBP1

2-Hydroxybiphenyl 3-monooxygenase (EC 1.14.13.44) from Pseudomonas azelaica HBP1 is an FAD-dependent aromatic hydroxylase that catalyzes the conversion of 2-hydroxybiphenyl to 2, 3-dihydroxybiphenyl in the presence of NADH and oxygen. The catalytic mechanism of this three-substrate reaction was investigated at 7 degrees C by stopped-flow absorption spectroscopy. Various individual steps associated with catalysis were readily observed at pH 7.5, the optimum pH for enzyme turnover. Anaerobic reduction of the free enzyme by NADH is a biphasic process, most likely reflecting the presence of two distinct enzyme forms. Binding of 2-hydroxybiphenyl stimulated the rate of enzyme reduction by NADH by 2 orders of magnitude. The anaerobic reduction of the enzyme-substrate complex involved the formation of a transient charge-transfer complex between the reduced flavin and NAD(+). A similar transient intermediate was formed when the enzyme was complexed with the substrate analog 2-sec-butylphenol or with the non-substrate effector 2,3-dihydroxybiphenyl. Excess NAD(+) strongly stabilized the charge-transfer complexes but did not give rise to the appearance of any intermediate during the reduction of uncomplexed enzyme. Free reduced 2-hydroxybiphenyl 3-monooxygenase reacted rapidly with oxygen to form oxidized enzyme with no appearance of intermediates during this reaction. In the presence of 2-hydroxybiphenyl, two consecutive spectral intermediates were observed which were assigned to the flavin C(4a)-hydroperoxide and the flavin C(4a)-hydroxide, respectively. No oxygenated flavin intermediates were observed when the enzyme was in complex with 2, 3-dihydroxybiphenyl. Monovalent anions retarded the dehydration of the flavin C(4a)-hydroxide without stabilization of additional intermediates. The kinetic data for 2-hydroxybiphenyl 3-monooxygenase are consistent with a ternary complex mechanism in which the aromatic substrate has strict control in both the reductive and oxidative half-reaction in a way that reactions leading to substrate hydroxylation are favored over those leading to the futile formation of hydrogen peroxide. NAD(+) release from the reduced enzyme-substrate complex is the slowest step in catalysis.     

Preparative regio- and chemoselective functionalization of hydrocarbons catalyzed by cell free preparations of 2-hydroxybiphenyl 3-monooxygenase

Oxygenases are useful catalysts for the selective incorporation of molecular oxygen into hydrocarbons. Here, we report on the application of isolated, cell free 2-hydroxybiphenyl 3-monooxygenase (HbpA) as catalyst for the regio- and chemospecific hydroxylation of 2-hydroxybiphenyl to 2,3-dihydroxybiphenyl. The catalyst was prepared from recombinant Escherichia coli using expanded bed adsorption chromatography and could be stored without significant loss of activity in lyophilized form. The reaction was performed in an aerated and thermostated simple stirred glass vessel in an aqueous (20% v/v)/organic (80% v/v) reaction medium. This allowed in situ product recovery preventing substrate and product inhibition of the catalyst as well as decay of the labile product 2,3-dihydroxybiphenyl. Enzymatic regeneration of reduced nicotinamide cofactors was achieved using the formate/formate dehydrogenase system. We obtained volumetric productivities of up to 0.45 g l⁻¹ h⁻¹. No significant decrease of productivity was observed within 7 h and more. Product purification (purity 92%) was achieved using solid phase extraction with aluminum oxide followed by crystallization as a polishing step (purity>99%).

To our knowledge, these results show for the first time the perspectives of integrated enzyme and cofactor regeneration-based biocatalytic processes in organic/aqueous emulsions, coupled with in situ product recovery.     

Alteration of substrate specificity of cholesterol oxidase from Streptomyces sp. by site-directed mutagenesis

Despite the structural similarities between cholesterol oxidase from Streptomyces and that from Brevibacterium, both enzymes exhibit different characteristics, such as catalytic activity, optimum pH and temperature. In attempts to define the molecular basis of differences in catalytic activity or stability, substitutions at six amino acid residues were introduced into cholesterol oxidase using site-directed mutagenesis of its gene. The amino acid substitutions chosen were based on structural comparisons of cholesterol oxidases from Streptomyces and BREVIBACTERIUM: Seven mutant enzymes were constructed with the following amino acid substitutions: L117P, L119A, L119F, V145Q, Q286R, P357N and S379T. All the mutant enzymes exhibited activity with the exception of that with the L117P mutation. The resulting V145Q mutant enzyme has low activities for all substrates examined and the S379T mutant enzyme showed markedly altered substrate specificity compared with the wild-type enzyme. To evaluate the role of V145 and S379 residues in the reaction, mutants with two additional substitutions in V145 and four in S379 were constructed. The mutant enzymes created by the replacement of V145 by Asp and Glu had much lower catalytic efficiency for cholesterol and pregnenolone as substrates than the wild-type enzyme. From previous studies and this study, the V145 residue seems to be important for the stability and substrate binding of the cholesterol oxidase. In contrast, the catalytic efficiencies (k(cat)/K(m)) of the S379T mutant enzyme for cholesterol and pregnenolone were 1.8- and 6.0-fold higher, respectively, than those of the wild-type enzyme. The enhanced catalytic efficiency of the S379T mutant enzyme for pregnenolone was due to a slightly high k(cat) value and a low K(m) value. These findings will provide several ideas for the design of more powerful enzymes that can be applied to clinical determination of serum cholesterol levels and as sterol probes.     

Oxidation of Phenolic Compounds by Peroxidase in the Presence of Soluble Polymers

The kinetics of Coprinus cinereus peroxidase-catalyzed 1-naphthol, 2-naphthol, and 4-hydroxybiphenyl oxidation was investigated. The initial rates of the naphthols' and 4-hydroxybiphenyl oxidations were linearly dependent on enzyme concentration. The rates depended on substrate concentration and saturated at concentrations above 100 microM of hydrogen peroxide, 25-50 microM of naphthols, and 10 microM of 4-hydroxybiphenyl. At the peroxide concentration 100 microM calculated K(m) and the maximal rate (V(max)) were 74.7 microM and 0.53 microM/sec or 175 microM and 2.0 microM/sec for 1- or 2-naphthol, respectively, and 29.68 microM and 0.42 microM/sec for 4-hydroxybiphenyl. Kinetic measurements of exhaustive naphthol and 4-hydroxybiphenyl oxidation showed that peroxidase is inactivated during the oxidation of the substrates. Different factors and additives, water soluble polymers and albumins (PEG, PEI, PL, BSA, HSA), influenced the initial naphthols and 4-hydroxybiphenyl oxidation rates, peroxidase inactivation rates, and the degree of the substrate conversion. Addition of albumin increased turnover number of naphthols oxidation 1.5-4 times. Light scattering increase was observed when peroxidase-catalyzed oxidation reaction was investigated and suggested that insoluble particles were formed during the process. The addition of polymers, change of concentration and ionic strength of the solution as well as the number of other factors influenced the observed light scattering. The number of particles formed during peroxidase-catalyzed naphthols' and 4-hydroxybiphenyl oxidation and their distribution according to size in the interval 2.5-300 microm were detected by particle counting in solutions.     

Effects of stabilizing solutes on salt activation of phosphoenolpyruvate carboxylase from various plant sources

Phosphoenolpyruvate carboxylase (PEP carboxylase EC 4.1.1.31) was extracted from various halophytic, semi-halophytic and glycophytic plant species. When the enzyme of those extracts was substrate protected, and in the presence of 1.6 m M PEP in the reaction mixture, the activity of PEP carboxylase was increased by 100 m M NaCl, and the activity range in the presence of NaCl was expanded. No correlation could be established between the response of the enzyme to ions and various plant characteristics, such as taxonomic status, salt tolerance or carbon fixation pathways. Salt activation of PEP carboxylase was substrate (PEP) dependent, but the minimal substrate concentration varied in different species.
Effects of the stabilizing solutes PEP, betaine, proline and glycerol on the kinetic properties of PEP carboxylase from Zea mays (L.) cv. Hazera were analyzed. In the absence of NaCl the slope of the Hill plot (n_It) tended to rise in the presence of these solutes. Stabilization of the enzyme with betaine or glycerol caused a decrease in K'. while K' and VTO increased in the presence of PEP. NaCl (100 mM) caused an increase in both K' and V^max in the protected as well as in the unprotected enzyme, except for PEP protection, where K' decreased somewhat. In the presence of the protectants, glycerol and PEP, the effect of NaCl on V^max, was 2–4 times higher than its effect on the non-protected enzyme.     

Analyzing the catalytic mechanism of the Fe-type nitrile hydratase from Comamonas testosteroni Ni1

In order to gain insight into the catalytic mechanism of Fe-type nitrile hydratases (NHase), the pH and temperature dependence of the kinetic parameters k cat, K m, and k cat/ K m along with the solvent isotope effect were examined for the Fe-type NHase from Comamonas testosteroni Ni1 ( CtNHase). CtNHase was found to exhibit a bell-shaped curve for plots of relative activity vs pH over pH values 4-10 for the hydration of acrylonitrile and was found to display maximal activity at pH approximately 7.2. Fits of these data provided a p K ES1 value of 6.1 +/- 0.1, a p K ES2 value of 9.1 +/- 0.2 ( k' cat = 10.1 +/- 0.3 s (-1)), a p K E1 value of 6.2 +/- 0.1, and a p K E2 value of 9.2 +/- 0.1 ( k' cat/ K' m of 2.0 +/- 0.2 s (-1) mM (-1)). Proton inventory studies indicate that two protons are transferred in the rate-limiting step of the reaction at pH 7.2. Since CtNHase is stable to 25 degrees C, an Arrhenius plot was constructed by plotting ln( k cat) vs 1/ T, providing an E a of 33.3 +/- 1.5 kJ/mol. Delta H degrees of ionization values were also determined, thus helping to identify the ionizing groups exhibiting the p K ES1 and p K ES2 values. Based on Delta H degrees ion data, p K ES1 is assigned to betaTyr68 while p K ES2 is assigned to betaArg52, betaArg157, or alphaSer116 (NHases are alpha 2beta 2 heterotetramers). Given the strong similarities in the kinetic data obtained for both Co- and Fe-type NHase enzymes, both types of NHase enzymes likely hydrate nitriles in a similar fashion.     

Dual substrate model for novel approach towards a kinetic study of acetylcholinesterase inhibition by diazinon

Limited reports as compared to other insecticides appear in the literature for acetylcholinesterase (AChE) inhibition by diazinon. In the current study, new kinetic parameters of AChE inhibition by diazinon have been investigated. The assay was done with bovine retinal AChE using two different substrate (ASCh) concentrations in the absence and presence of diazinon (0.08-1.28 mM). The optical density was monitored up to 25 min (reaction time) for the assay. New kinetic parameters k'(oms), K'(sms), k(oms), K(sms), K'(asms) and K(asms) ) were calculated from these experimental data.     

Enzyme kinetics: partial and complete uncompetitive inhibition

A graphical method for analysing enzyme data to obtain kinetic parameters, to identify the types of inhibition and the enzyme mechanisms is described. The method consists of plotting experimental data as v/(V(0)-v) versus 1/(I) at different substrate concentrations. I is the inhibitor concentration; V(0) and v are the initial rates of enzyme reaction attained by the system in the presence of a fixed amount of substrate and in the absence and presence of inhibitor respectively. Complete inhibition gives straight lines that pass through the origin while partial inhibition gives straight lines that converge on the 1/I-axis at a point away from the origin. With uncompetitive inhibition the slopes of the lines decrease with increasing substrate concentration. The kinetic parameters K(m), K'(i) and beta (degree of partiality) can best be determined from respective secondary plots of slope and intercept versus reciprocal of substrate concentration.     

Residues at the active site of the esterase 2 from Alicyclobacillus acidocaldarius involved in substrate specificity and catalytic activity at high temperature.

The recently solved three-dimensional structure of the thermophilic esterase 2 from Alicyclobacillus acidocaldarius allowed us to have a snapshot of an enzyme-sulfonate complex, which mimics the second stage of the catalytic reaction, namely the covalent acyl-enzyme intermediate. The aim of this work was to design, by structure-aided analysis and to generate by site-directed and saturation mutagenesis, EST2 variants with changed substrate specificity in the direction of preference for monoacylesters whose acyl-chain length is greater than eight carbon atoms. Positions 211 and 215 of the polypeptide chain were chosen to introduce mutations. Among five variants with single and double amino acid substitutions, three were obtained, M211S, R215L, and M211S/R215L, that changed the catalytic efficiency profile in the desired direction. Kinetic characterization of mutants and wild type showed that this change was achieved by an increase in k(cat) and a decrease in K(m) values with respect to the parental enzyme. The M211S/R215L specificity constant for p-nitrophenyl decanoate substrate was 6-fold higher than the wild type. However, variants M211T, M211S, and M211V showed strikingly increased activity as well as maximal activity with monoacylesters with four carbon atoms in the acyl chain, compared with the wild type. In the case of mutant M211T, the k(cat) for p-nitrophenyl butanoate was 2.4-fold higher. Overall, depending on the variant and on the substrate, we observed improved catalytic activity at 70 degrees C with respect to the wild type, which was a somewhat unexpected result for an enzyme with already high k(cat) values at high temperature. In addition, variants with altered specificity toward the acyl-chain length were obtained. The results were interpreted in the context of the EST2 three-dimensional structure and a proposed catalytic mechanism in which k(cat), e.g. the limiting step of the reaction, was dependent on the acyl chain length of the ester substrate.     

Immobilization and properties of carminomycin 4-O-methyltranferase, the enzyme which catalyzes the final step in the biosynthesis of daunorubicin in Streptomyces peucetius

The carminomycin 4-O-methyltransferase enzyme from Streptomyces peucetius was covalently immobilized on 3M Emphaze ABI-activated beads. Optimal conditions of time, temperature, pH, ionic strength, enzyme, substrate (carminomycin), and cosubstrate (S-adenosyl-L-methionine) concentrations were defined for the immobilization reaction. Protein immobilization yield ranged from 52% to 60%. Including carminomycin during immobilization had a positive effect on the activity of the immobilized enzyme but a strongly negative effect on the coupling efficiency. The immobilized enzyme retained at least 57% of its maximum activity after storage at 4 degrees C for more than 4 months. The properties of the free and immobilized enzyme were compared to determine whether immobilization could alter enzyme activity. Both soluble and bound enzyme exhibited the same pH profile with an optimum near 8.0. Immobilization caused an approximately 50% decrease in the apparent K(m) (K'(m)) for carminomycin while the K'(m) for S-adenosyl-L-methionine was approximately doubled. A 57% decrease in the V(max) value occurred upon immobilization. These changes are discussed in terms of active site modifications as a consequence of the enzyme immobilization. This system has a potential use in bioreactors for improving the conversion of carminomycin to daunorubicin. (c) 1995 John Wiley & Sons, Inc.     

Directed evolution of N-carbamyl-D-amino acid amidohydrolase for simultaneous improvement of oxidative and thermal stability

Directed evolution of N-carbamyl-D-amino acid amidohydrolase from Agrobacterium tumefaciens NRRL B11291 was attempted in order to simultaneously improve oxidative and thermal stability. A mutant library was generated by DNA shuffling, and positive clones with improved oxidative and thermal stability were screened on the basis of the activity staining method on a solid agar plate containing pH indicator (phenol red) and substrate (N-carbamyl-D-p-hydroxyphenylglycine). Two rounds of directed evolution resulted in the best mutant 2S3 with a significantly improved stability. Oxidative stability of the evolved enzyme 2S3 was about 18-fold higher than that of the wild type, and it also showed an 8-fold increased thermostability. The K(m) value of 2S3 was comparable to that of wild-type enzyme, but k(cat) was slightly decreased. DNA sequence analysis revealed that six amino acid residues (Q23L, V40A, H58Y, G75S, M184L, and T262A) were substituted in 2S3. From the mutational analysis, four mutations (Q23L, H58Y, M184L, and T262A) were found to lead to an improvement of both oxidative and thermal stability. Of them, T262A had the most significant effect, and V40A and G75S only increased the oxidative stability.     

Remarkable aliphatic hydroxylation by the diiron enzyme toluene 4-monooxygenase in reactions with radical or cation diagnostic probes norcarane, 1,1-dimethylcyclopropane, and 1,1-diethylcyclopropane

Toluene 4-monooxygenase (T4MO) catalyzes the hydroxylation of toluene to yield 96% p-cresol. This diiron enzyme complex was used to oxidize norcarane (bicyclo[4.1.0]heptane), 1,1-dimethylcyclopropane, and 1,1-diethylcyclopropane, substrate analogues that can undergo diagnostic reactions upon the production of transient radical or cationic intermediates. Norcarane closely matches the shape and volume of the natural substrate toluene. Reaction of isoforms of the hydroxylase component of T4MO (T4moH) with different regiospecificities for toluene hydroxylation (k(cat) approximately 1.9-2.3 s(-)(1) and coupling efficiency approximately 81-96%) revealed similar catalytic parameters for norcarane oxidation (k(cat) approximately 0.3-0.5 s(-)(1) and coupling efficiency approximately 72%). The products included variable amounts of the un-rearranged isomeric norcaranols and cyclohex-2-enyl methanol, a product attributed to rearrangement of a radical oxidation intermediate. A ring-expansion product derived from the norcaranyl C-2 cation, cyclohept-3-enol, was not produced by either the natural enzyme or any of the T4moH isoforms tested. Comparative studies of 1,1-dimethylcyclopropane and 1,1-diethylcyclopropane, diagnostic substrates with differences in size and with approximately 50-fold slower k(cat) values, gave products consistent with both radical rearrangement and cation ring expansion. Examination of the isotopic enrichment of the incorporated O-atoms for all products revealed high-fidelity incorporation of an O-atom from O(2) in the un-rearranged and radical-rearranged products, while the O-atom found in the cation ring-expansion products was predominantly obtained by reaction with H(2)O. The results show a divergence of radical and cation pathways for T4moH-mediated hydroxylation that can be dissected by diagnostic substrate probe rearrangements and by changes in the source of oxygen used for substrate oxygenation.     

Chlorella virus-encoded deoxyuridine triphosphatases exhibit different temperature optima

A putative deoxyuridine triphosphatase (dUTPase) gene from chlorella virus PBCV-1 was cloned, and the recombinant protein was expressed in Escherichia coli. The recombinant protein has dUTPase activity and requires Mg(2+) for optimal activity, while it retains some activity in the presence of other divalent cations. Kinetic studies of the enzyme revealed a K(m) of 11.7 microM, a turnover k(cat) of 6.8 s(-1), and a catalytic efficiency of k(cat)/K(m) = 5.8 x 10(5) M(-1) s(-1). dUTPase genes were cloned and expressed from two other chlorella viruses IL-3A and SH-6A. The two dUTPases have similar properties to PBCV-1 dUTPase except that IL-3A dUTPase has a lower temperature optimum (37 degrees C) than PBCV-1 dUTPase (50 degrees C). The IL-3A dUTPase differs from the PBCV-1 enzyme by nine amino acids, including two amino acid substitutions, Glu81-->Ser81 and Thr84-->Arg84, in the highly conserved motif III of the proteins. To investigate the difference in temperature optima between the two enzymes, homology modeling and docking simulations were conducted. The results of the simulation and comparisons of amino acid sequence suggest that adjacent amino acids are important in the temperature optima. To confirm this suggestion, three site-directed amino acid substitutions were made in the IL-3A enzyme: Thr84-->Arg84, Glu81-->Ser81, and Glu81-->Ser81 plus Thr84-->Arg84. The single substitutions affected the optimal temperature for enzyme activity. The temperature optimum increased from 37 to 55 degrees C for the enzyme containing the two amino acid substitutions. We postulate that the change in temperature optimum is due to reduction in charge and balkiness in the active cavity that allows more movement of the ligand and protein before the enzyme and substrate complex is formed.     

Convergent evolution of SARS-CoV-2 in human and animals

Recently,many SARS-CoV-2 variants including 501Y.V1,501Y.V2 and 501Y.V3 were detected in different regions(Table S1)and drew great attention from all over the world.The 501Y.V1 was firstly isolated in the United Kingdom(UK)(Davies et al.,2020)and featured with 7 substitutions including N501Y as well as 3 deletions in S protein.This variant was identified to increase the viral transmissibility by 56％in comparison with the preexisting strains.Days after this report,another SARS-CoV-2 variant(501Y.V2)featured with N501Y,K417N and E484K substitutions in S protein was supposed to rapidly outcompete the preexisting strains(Tegally et al.,2020)in South Africa.Besides,the 501Y.V3 variant was initially detected in Brazil and has caused rapidly increased infections with SNPs N501Y,K417T and E484K.Of them,N501Y,K417N/T and E484K are of particular interest because the N501Y was shared in all three variants and the K417N/T and E484K were detected simultaneous appeared with N501Y in 501Y.V2 and 501Y.V3.     

Purification and characterization of peroxidase from cauliflower (Brassica oleracea L. var. botrytis) buds

Peroxidases (EC 1.11.1.7; donor: hydrogen peroxide oxidoreductase) are part of a large group of enzymes. In this study, peroxidase, a primer antioxidant enzyme, was purified with 19.3 fold and 0.2% efficiency from cauliflower (Brassica oleracea L.) by ammonium sulphate precipitation, dialysis, CM-Sephadex ion-exchange chromatography and Sephadex G-25 purification steps. The substrate specificity of peroxidase was investigated using 2,2'-azino-bis(3-ethylbenz-thiazoline-6-sulphonic acid) (ABTS), 2-methoxyphenol (guaiacol), 1,2-dihydroxybenzene (catechol), 1,2,3-trihyidroxybenzene (pyrogallol) and 4-methylcatechol. Also, optimum pH, optimum temperature, optimum ionic strength, stable pH, stable temperature, thermal inactivation conditions were determined for guaiacol/H(2)O(2), pyrogallol/H(2)O(2), ABTS/H(2)O(2), catechol/H(2)O(2) and 4-methyl catechol/H(2)O(2) substrate patterns. The molecular weight (M(w)) of this enzyme was found to be 44 kDa by gel filtration chromatography method. Native polyacrylamide gel electrophoresis (PAGE) was performed for isoenzyme determination and a single band was observed. K(m) and V(max) values were calculated from Lineweaver-Burk graph for each substrate patterns.     

Improvement of thermostability of fungal xylanase by using site-directed mutagenesis

Replacing several serine and threonine residues on the Ser/Thr surface of the xylanase from Aspergillus niger BCC14405 with four and five arginines effectively increases the thermostability of the enzyme. The modified enzymes showed 80% of maximal activity after incubating in xylan substrate for 2h at 50 degrees C compared to only 15% activity for wild-type enzyme. The half-life of the mutated enzymes increased to 257+/-16 and 285+/-10 min for the four- and five-arginine mutants, respectively, compared to 14+/-1 min for the wild-type enzyme. Thus, the arginine substitutions effectively increase stability by 18-20-fold. Kinetic parameters of the four-arginine-substitution enzyme were maintained at the level of the wild-type enzyme with the K(m) and V(max) values of 8.3+/-0.1 mgml(-1) and 9556+/-66 (n=3) U mg(-1) protein, respectively. The five-arginine-substitution enzyme showed only slight alteration in K(m) and V(max) with K(m) of 11.7+/-1.7 mgml(-1) and V(max) of 8502+/-65 Umg(-1) protein, indicating lower substrate affinity and catalytic rate. Our study demonstrated that properly introduced arginine residues on the Ser/Thr surface of xylanase family 11 might be very effective in improvement of enzyme thermostability.     

Cold adaptation of xylose isomerase from Thermus thermophilus through random PCR mutagenesis. Gene cloning and protein characterization.

Random PCR mutagenesis was applied to the Thermus thermophilus xylA gene encoding xylose isomerase. Three cold-adapted mutants were isolated with the following amino-acid substitutions: E372G, V379A (M-1021), E372G, F163L (M-1024) and E372G (M-1026). The wild-type and mutated xylA genes were cloned and expressed in Escherichia coli HB101 using the vector pGEM-T Easy, and their physicochemical and catalytic properties were determined. The optimum pH for xylose isomerization activity for the mutants was approximately 7.0, which is similar to the wild-type enzyme. Compared with the wild-type, the mutants were active over a broader pH range. The mutants exhibited up to nine times higher catalytic rate constants (k(cat)) for d-xylose compared with the wild-type enzyme at 60 degrees C, but they did not show any increase in catalytic efficiency (k(cat)/K(m)). For d-glucose, both the k(cat) and the k(cat)/K(m) values for the mutants were increased compared with the wild-type enzyme. Furthermore, the mutant enzymes exhibited up to 255 times higher inhibition constants (K(i)) for xylitol than the wild-type, indicating that they are less inhibited by xylitol. The thermal stability of the mutated enzymes was poorer than that of the wild-type enzyme. The results are discussed in terms of increased molecular flexibility of the mutant enzymes at low temperatures.     

Modifying the substrate specificity of staphylococcal lipases.

The lipase from Staphylococcus hyicus (SHL) displays a high phospholipase activity whereas the homologous S. aureus lipase (SAL) is not active or hardly active on phospholipid substrates. Previously, it has been shown that elements within the region comprising residues 254-358 are essential for the recognition of phospholipids by SHL. To specifically identify the important residues, nine small clusters of SHL were individually replaced by the corresponding SAL sequence within region 254-358. For cloning convenience, a synthetic gene fragment of SHL was assembled, thereby introducing restriction sites into the SHL gene and optimizing the codon usage. All nine chimeras were well-expressed as active enzymes. Eight chimeras showed lipase and phospholipase activities within a factor of 2 comparable to WT-SHL in standard activity assays. Exchange of the polar SHL region 293-300 by the more hydrophobic SAL region resulted in a 32-fold increased k(cat)/K(m) value for lipase activity and a concomitant 68-fold decrease in k(cat)/K(m) for phospholipase activity. Both changes are due to effects on catalytic turnover as well as on substrate affinity. Subsequently, six point mutants were generated; G293N, E295F, T297P, K298F, I299V, and L300I. Residue E295 appeared to play a minor role whereas K298 was the major determinant for phospholipase activity. The mutation K298F caused a 60-fold decrease in k(cat)/K(m) on the phospholipid substrate due to changes in both k(cat) and K(m). Substitution of F298 by a lysine in SAL resulted in a 4-fold increase in phospholipase activity. Two additional hydrophobic to polar substitutions further increased the phospholipase activity 23-fold compared to WT-SAL.