Interaction of initiator proteins with the origin of replication of an IncL/M plasmid

The origin of replication of the IncL/M plasmid pMU604 was analyzed to identify sequences important for binding of initiator proteins and origin activity. A thrice repeated sequence motif 5'-NANCYGCAA-3' was identified as the binding site (RepA box) of the initiator protein, RepA. All three copies of the RepA box were required for in vivo activity and binding of RepA to these boxes appeared to be cooperative. A DnaA R box (box 1), located immediately upstream of the RepA boxes, was not required for recruitment of DnaA during initiation of replication by RepA of pMU604 unless a DnaA R box located at the distal end of the origin (box 3) had been inactivated. However, DnaA R box 1 was important for recruitment of DnaA to the origin of replication of pMU604 when the initiator RepA was that from a distantly related plasmid, pMU720. A mutation which scrambled DnaA R boxes 1 and 3 and one which scrambled DnaA R boxes 1, 3 and 4 had much more deleterious effects on initiation by RepA of pMU720 than on initiation by RepA of pMU604. Neither Rep protein could initiate replication from the origin of pMU604 in the absence of DnaA, suggesting that the difference between them might lie in the mechanism of recruitment of DnaA to this origin. DnaA protein enhanced the binding and origin unwinding activities of RepA of pMU604, but appeared unable to bind to a linear DNA fragment bearing the origin of replication of pMU604 in the absence of other proteins.     

Interaction of the initiator protein of an IncB plasmid with its origin of DNA replication

The replication initiator protein RepA of the IncB plasmid pMU720 was purified and used in DNase I protection assays in vitro. RepA protected a 68-bp region of the origin of replication of pMU720. This region, which lies immediately downstream of the DnaA box, contains four copies of the sequence motif 5'AANCNGCAA3'. Mutational analyses identified this sequence as the binding site specifically recognized by RepA (the RepA box). Binding of RepA to the RepA boxes was ordered and sequential, with the box closest to the DnaA binding site (box 1) occupied first and the most distant boxes (boxes 3 and 4) occupied last. However, only boxes 1, 2, and 4 were essential for origin activity, with box 3 playing a lesser role. Changing the spacing between box 1 and the other three boxes affected binding of RepA in vitro and origin activity in vivo, indicating that the RepA molecules bound to ori(B) interact with one another.     

Analysis of functional domains of Rts1 RepA by means of a series of hybrid proteins with P1 RepA.

The RepA protein of the plasmid Rts1, consisting of 288 amino acids, is a trans-acting protein essential for initiation of plasmid replication. To study the functional domains of RepA, hybrid proteins of Rts1 RepA with the RepA initiator protein of plasmid P1 were constructed such that the N-terminal portion was from Rts1 RepA and the C-terminal portion was from P1 RepA. Six hybrid proteins were examined for function. The N-terminal region of Rts1 RepA between amino acid residues 113 and 129 was found to be important for Rts1 ori binding in vitro. For activation of the origin in vivo, an Rts1 RepA subregion between residues 177 and 206 as well as the DNA binding domain was required. None of the hybrid initiator proteins activated the P1 origin. Both in vivo and in vitro studies showed, in addition, that a C-terminal portion of Rts1 RepA was required along with the DNA binding and ori activating domains to achieve autorepression, suggesting that the C-terminal region of Rts1 RepA is involved in dimer formation. A hybrid protein consisting of the N-terminal 145 amino acids of Rts1 and the C-terminal 142 amino acids from P1 showed strong interference with both Rts1 and P1 replication, whereas other hybrid proteins showed no or little effect on P1 replication.     

Deletion analysis of the mini-P1 plasmid origin of replication and the role of Escherichia coli DnaA protein

The mini-P1 plasmid origin of replication is contained on a 246 base pair (bp) piece of DNA. At one end there are five 19-bp binding sites for the P1 initiator protein, RepA, and near the other end there are two 9-bp DnaA protein-binding sites. To further define the limits of the origin, we cloned the origin region in M13 and constructed deletions of either end. We sequenced the DNA and tested the replicative form I DNA of the deletion phages for their ability to support RepA-dependent DNA replication in an in vitro system. The origin that is functional in vitro could be reduced to 202 bp. It includes three intact and one incomplete RepA-binding sites at one end and the two DnaA-binding sites at the other end. When the two naturally occurring DnaA-binding sites were replaced with one or two synthetic sites, only the construction containing two sites was active in vitro. We found that the minimal origin that is functional in vivo contains all of the five RepA and the two DnaA-binding sites. Mini-P1 plasmid replication both in vivo and in vitro requires two initiator proteins, the Escherichia coli DnaA protein and the P1 RepA protein. We have found that the ADP form of DnaA is as active as the ATP form of the protein in the in vitro replication of mini-P1. In contrast, only the ATP form is active for in vitro replication of plasmids carrying the E. coli origin (Bramhill, D., and Kornberg, A. (1988) Cell 52, 743-755).     

Importance of structural differences between complementary RNA molecules to control of replication of an IncB plasmid.

Replication of the IncB miniplasmid pMU720 is dependent on the expression of repA, the gene encoding replication initiator protein RepA. Binding of a small antisense RNA (RNAI) to its complementary target (stem-loop I [SLI]) in the RepA mRNA prevents the participation of SLI in the formation of a pseudoknot that is an enhancer of translation of this mRNA. Thus, RNAI regulates the frequency of replication of pMU720 by controlling the efficiency of translation of the RepA mRNA. Mutational analysis of the two seven-base complementary sequences involved in formation of the pseudoknot showed that only the five central bases of each were critical for the formation of the pseudoknot. Physical analysis of SLI showed that despite the complete complementarity of its sequence to that of RNAI, the structures of the two molecules are different. The most prominent difference between the two structures is the presence of a 4-base internal loop immediately below the hairpin loop of SLI but not that of RNAI. Closure of this internal loop in SLI resulted in a 40-fold reduction in repA expression and loss of sensitivity of the residual expression to inhibition by RNAI. By contrast, repA expression was largely unaffected by the closure of a lower internal loop whose presence in SLI and RNAI is essential for effective interaction between these two molecules. These results suggest that the interaction of SLI with the distal pseudoknot bases is fundamentally different from the RNAI-SLI binding interaction and that the differences in structure between RNAI and SLI are necessary to allow SLI to be able to efficiently bind RNAI and to participate in pseudoknot formation.     

Mechanistic aspects of DnaA-RepA interaction as revealed by yeast forward and reverse two-hybrid analysis

Using yeast forward and reverse two-hybrid analysis and biochemical techniques, we present novel and definitive in vivo and in vitro evidence that both the N-terminal domain I and C-terminal domain IV of the host-encoded DnaA initiator protein of Escherichia coli interact physically with plasmid-encoded RepA initiator of pSC101. The N-terminal, but not the C-terminal, region of RepA interacted with DnaA in vitro. These protein-protein interactions are critical for two very early steps of replication initiation, namely origin unwinding and helicase loading. Neither domain I nor IV of DnaA could individually collaborate with RepA to promote pSC101 replication. However, when the two domains are co-expressed within a common cell milieu and allowed to associate non-covalently with each other via a pair of leucine zippers, replication of the plasmid was supported in vivo. Thus, the result shows that physical tethering, either non-covalent or covalent, of domain I and IV of DnaA and interaction of both domains with RepA, are critical for replication initiation. The results also provide the molecular basis for a novel, potential, replication-based bacterial two-hybrid system.     

Pseudoknot-dependent translational coupling in repBA genes of the IncB plasmid pMU720 involves reinitiation

Replication of the IncB miniplasmid pMU720 requires synthesis of the replication initiator protein, RepA, whose translation is coupled to that of a leader peptide, RepB. The unusual feature of this system is that translational coupling in repBA has to be activated by the formation of a pseudoknot immediately upstream of the repA Shine-Dalgarno sequence. A small antisense RNA, RNAI, controls replication of pMU720 by interacting with repBA mRNA to inhibit expression of repA both directly, by preventing formation of the pseudoknot, and indirectly, by inhibiting translation of repB. The mechanism of translational coupling in repBA was investigated using the specialized ribosome system, which directs a subpopulation of ribosomes that carry an altered anti-Shine-Dalgarno sequence to translate mRNA molecules whose Shine-Dalgarno sequences have been altered to be complementary to the mutant anti-Shine-Dalgarno sequence. Our data indicate that translation of repA involves reinitiation by the ribosome that has terminated translation of repB. The role of the pseudoknot in this process and its effect on the control of copy number in pMU720 are discussed.     

The DNA unwinding element: a novel, cis-acting component that facilitates opening of the Escherichia coli replication origin.

We have discovered that DNA supercoiling, in the absence of replication proteins, induces localized unwinding in the Escherichia coli replication origin (oriC) at the same sequence opened by the dnaA initiator protein. The DNA helix at the tandemly repeated, 13mer sequence is thermodynamically unstable, as evidenced by hypersensitivity to single-strand-specific nuclease in a negatively supercoiled plasmid, and demonstrated by stable DNA unwinding seen after two-dimensional gel electrophoresis of topoisomers. A replication-defective oriC mutant lacking the leftmost 13mer shows no nuclease hypersensitivity in two remaining 13mers and no detectable DNA unwinding on two-dimensional gels. The replication defect in the oriC mutant can be corrected by inserting a dissimilar DNA sequence with reduced helical stability in place of the leftmost 13mer. Thus, the helical instability of the leftmost 13mer, not the specific 13mer sequence, is essential for origin function. The rightmost 13mer exhibits helical instability but differs from the leftmost 13mer in its strict sequence conservation among related bacterial origins. The repeated 13mer region appears to serve two overlapping functions: protein recognition and helical instability. We propose that the cis-acting sequence whose helical instability is required for origin function be called the DNA unwinding element (DUE).     

Heat shock proteins DnaJ, DnaK, and GrpE stimulate P1 plasmid replication by promoting initiator binding to the origin.

Binding of the P1-encoded protein RepA to the origin of P1 plasmid replication is essential for initiation of DNA replication and for autoregulatory repression of the repA promoter. Previous studies have shown defects in both initiation and repression in hosts lacking heat shock proteins DnaJ, DnaK, and GrpE and have suggested that these proteins play a role in the RepA-DNA binding required for initiation and repression. In this study, using in vivo dimethyl sulfate footprinting, we have confirmed the roles of the three heat shock proteins in promoting RepA binding to the origin. The defects in both activities could be suppressed by increasing the concentration of wild-type RepA over the physiological level. We also isolated RepA mutants that were effective initiators and repressors without requiring the heat shock proteins. These data suggest that the heat shock proteins facilitate both repression and initiation by promoting only the DNA-binding activity of RepA. In a similar plasmid, F, initiator mutants that confer heat shock protein independence for replication were also found, but they were defective for repression. We propose that the initiator binding involved in repression and the initiator binding involved in initiation are similar in P1 but different in F.     

Comparative analysis of the replication regions of IncB, IncK, and IncZ plasmids.

Minireplicons from the I-complex plasmids R387 (IncK) and pIE545 (IncZ) were constructed, and the nucleotide sequences of their replication regions were compared with that of the B plasmid, pMU720. The coding sequence of the putative replication protein, RepA, of each plasmid was located. RepA of K and B plasmids were homologous, whereas RepA of Z resembled RepA1 of FII plasmid. Sequences upstream of RepA were conserved in the three I-complex plasmids. Group B and Z plasmids were incompatible.     

DNA binding properties and replication activity of the T antigen related D2 phosphoprotein

According to earlier genetic experiments, a region within the N-terminal 50-100 amino acids may be important for the replication function of T antigen, the initiator protein of simian virus 40 (SV40). We have investigated this possibility using the T antigen related D2 protein in several biochemical assay systems. D2 protein, a phosphoprotein coded for by the adeno-SV40 hybrid virus Ad2+D2, shares its 594 C-terminal amino acids with authentic T antigen and its 104 N-terminal amino acids with an adenovirus structural protein. We confirmed earlier studies showing that D2 protein appeared to bind well to specific binding sites in the SV40 origin of replication. We found, however, that D2 protein was rather inefficient, inducing the unwinding of the double-stranded origin region, and was much less active than authentic T antigen as an initiator of in vitro SV40 DNA replication. We interpret these findings to indicate that D2 protein molecules associate with the origin to form an aberrant complex that is quite inefficient, inducing DNA unwinding and the establishment of replication forks. The possibility that the N-terminus may be required for an optimal arrangement of T antigen at the origin was supported by results of dephosphorylation studies. Dephosphorylation of N-terminal phosphoamino acids had significant effects on the stability of D2 protein-origin complexes.     

Participation of the Escherichia coli heat shock proteins DnaJ, DnaK, and GrpE in autorepression of the P1 plasmid repA promoter

The replicon of the low copy number plasmid P1 uses the three Escherichia coli heat shock proteins DnaJ, DnaK, and GrpE for the efficient initiation of its DNA replication. The only P1-encoded protein required for plasmid replication is the initiator, RepA. Binding of RepA to the origin also represses the promoter for the repA gene, which is located within the origin. We found that repression is incomplete in E. coli strains with mutations in the dnaJ, dnaK, or grpE genes. Since there is no decrease in RepA concentration in the mutant strains, the mutations are likely to affect the protein-DNA or protein-protein reactions required for repression, thereby decreasing RepA binding at its promoter. We also showed that the deficit in repression can be overcome by providing excess RepA, implying that the mechanism of repression is not altered in the mutant strains. Since repression requires RepA binding to the origin, a binding deficit might account for the replication defect in the heat shock mutants.     

Molecular interactions of a replication initiator protein, RepA, with the replication origin of the enterococcal plasmid p703/5

We previously identified the origin of replication of p703/5, a small cryptic plasmid from the KBL703 strain of Enterococcus faecalis. The origin of replication contains putative regulatory cis-elements required for replication and a replication initiator (RepA) gene. The replicon of p703/5 is similar in its structural organization to theta-type plasmids, and RepA is homologous to a family of Rep proteins identified in several plasmids from Gram-positive bacteria. Here, we report molecular interactions between RepA and the replication origin of p703/5. DNase I footprinting using recombinant RepA together with electrophoretic mobility shift assays confirmed the binding of RepA to the replication origin of p703/5 via iterons and an inverted repeat. We also demonstrated the formation of RepA dimers and the different binding of RepA to the iteron and the inverted repeat using gel filtration chromatographic analysis, a chemical crosslinking assay, and electrophoretic mobility shift assays in the presence of guanidine hydrochloride. Our results suggest that RepA plays a regulatory role in the replication of the enterococcal plasmid p703/5 via mechanisms similar to those of typical iteron-carrying theta-type plasmids.     

Analysis of elements involved in pseudoknot-dependent expression and regulation of the repA gene of an IncL/M plasmid

Replication of the IncL/M plasmid pMU604 is controlled by a small antisense RNA molecule (RNAI), which, by inhibiting the formation of an RNA pseudoknot, regulates translation of the replication initiator protein, RepA. Efficient translation of the repA mRNA was shown to require the translation and correct termination of the leader peptide, RepB, and the formation of the pseudoknot. Although the pseudoknot was essential for the expression of repA, its presence was shown to interfere with the translation of repB. The requirement for pseudoknot formation could in large part be obviated by improving the ribosome binding region of repA, either by replacing the GUG start codon by AUG or by increasing the spacing between the start codon and the Shine-Dalgarno sequence (SD). The spacing between the distal pseudoknot sequence and the repA SD was shown to be suboptimal for maximal expression of repA.     

The region essential for efficient autonomous replication of pSa in Escherichia coli

Summary Comparative analyses were made between plasmid pSa17, a deletion derivative of pSa that is capable of replicating efficiently in Escherichia coli and plasmid pSa3, a derivative that is defective for replication. By comparing the restriction maps of these two derivatives, the regions essential for replication and for stable maintenance of the plasmid were determined. A 2.5 kb DNA segment bearing the origin of DNA replication of pSa17 was sequenced. A 36 kDa RepA protein was encoded in the region essential for replication. Downstream of the RepA coding region was a characteristic sequence including six 17 bp direct repeats, the possible binding sites of RepA protein, followed by AT-rich and GC-rich sequences. Furthermore, an 8 bp incomplete copy of the 17 bp repeat was found in the promoter region of the repA gene. Based on the hypothesis that RepA protein binds to this partial sequence as well as to intact 17 bp sequences, an autoregulatory system for the synthesis of RepA protein may be operative. Another open reading frame (ORF) was found in the region required for the stability of the plasmid. The putative protein encoded in this ORF showed significant homology to several site-specific recombination proteins. A possible role of this putative protein in stable maintenance of the plasmid is discussed.     

Critical sequences in the core of the P1 plasmid replication origin.

The core of the P1 plasmid replication origin consists of a series of 7-bp repeats and a G+C-rich stretch. Methylation of the GATC sequences in the repeats is essential. Forty different single-base mutations in the region were isolated and assayed for origin function. A single-base change within any 7-bp repeat could block the origin, irrespective of whether GATC bases were affected. The repeats themselves were critical, but the short intervals between them were not. Mutations in the G+C-rich region showed it to be a spacer whose exact length is important but whose sequence can vary considerably. It maintains a precise distance between the 7-bp repeats and binding sites for the P1 RepA initiator protein. It may also serve as a clamp to limit strand separation during initiation.