Characterization of microsatellite markers in peach [Prunus persica (L.) Batsch]

Microsatellites have emerged as an important system of molecular markers. We evaluated the potential of microsatellites for use in genetic studies of peach [Prunus persica (L.) Batsch]. Microsatellite loci in peach were identified by screening a pUC8 genomic library, a λZAPII leaf cDNA library, as well as through database searches. Primer sequences for the microsatellite loci were tested from the related Rosaceae species apple (Malus×domestica) and sour cherry (Prunus cerasus L.). The genomic library was screened for CT, CA and AGG repeats, while the cDNA library was screened for (CT)_n- and (CA)_n-containing clones. Estimates of microsatellite frequencies were determined from the genomic library screening, and indicate that CT repeats occur every 100 kb, CA repeats every 420 kb, and AGG repeats every 700 kb in the peach genome. Microsatellite- containing clones were sequenced, and specific PCR primers were designed to amplify the microsatellite- containing regions from genomic DNA. The level of microsatellite polymorphism was evaluated among 28 scion peach cultivars which displayed one to four alleles per primer pair. Five microsatellites were found to segregate in intraspecific peach-mapping crosses. In addition, these microsatellite markers were tested for their utility in cross-species amplification for use in comparative mapping both within the Rosaceae, and with the un- related species Arabidopsis thaliana L. Received: 18 June 1999 / Accepted: 6 December 1999     

Frequency, type, distribution and annotation of simple sequence repeats in Rosaceae ESTs

Genomic resources for peach, a model species for Rosaceae, are being developed to accelerate gene discovery in other Rosaceae species by comparative mapping. Simple sequence repeats (SSRs) are an important tool for comparative mapping because of their high polymorphism and transportability. To accelerate the development of SSR markers, we analyzed publicly available Rosaceae expressed sequence tags (ESTs) for SSRs. A total of 17,284 ESTs from almond, peach and rose were assembled into putatively non-redundant EST sets. For comparison, 179,099 ESTs from Arabidopsis were also used in the analysis. About 4% of the assembled ESTs contained SSRs in Rosaceae, which was higher than the 2.4% found in Arabidopsis. About half of the SSRs were found in the putative UTR, and the estimated average distance between SSRs in the UTR was 5.5 kb in rose, 5.1 kb in almond, 7 kb in peach and 13 kb in Arabidopsis. In the putative coding region, the estimated average distance was two to four times longer than in the UTR. Rosaceae ESTs containing SSRs were functionally annotated using the GenBank nr database and further classified using the gene ontology terms associated with the matching sequences in the SwissProt database. The detailed data including the sequences and annotation results are available from .     

An overview of the apple genome through BAC end sequence analysis

The apple, Malus x domestica Borkh., is one of the most important fruit trees grown worldwide. A bacterial artificial chromosome (BAC)-based physical map of the apple genome has been recently constructed. Based on this physical map, a total of approximately 2,100 clones from different contigs (overlapping BAC clones) have been selected and sequenced at both ends, generating 3,744 high-quality BAC end sequences (BESs) including 1,717 BAC end pairs. Approximately 8.5% of BESs contain simple sequence repeats (SSRs), most of which are AT/TA dimer repeats. Potential transposable elements are identified in approximately 21% of BESs, and most of these elements are retrotransposons. About 11% of BESs have homology to the Arabidopsis protein database. The matched proteins cover a broad range of categories. The average GC content of the predicted coding regions of BESs is 42.4%; while, that of the whole BESs is 39%. A small number of BES pairs were mapped to neighboring chromosome regions of A. thaliana and Populus trichocarpa; whereas, no pairs are mapped to the Oryza sativa genome. The apple has a higher degree of synteny with the closely related Populus than with the distantly related Arabidopsis. BAC end sequencing can be used to anchor a small proportion of the apple genome to the Populus and possibly to the Arabidopsis genomes.     

High-throughput targeted SSR marker development in peach (Prunus persica).

Simple sequence repeats (SSRs) have proven to be highly polymorphic, easily reproducible, codominant markers. However, developing an SSR map is very time consuming and expensive, and most SSRs are not specifically linked to gene loci of immediate interest. The ideal situation would be to combine a high-throughput, relatively inexpensive mapping technique with rapid identification of SSR loci in mapped regions of interest. For this reason, we coupled the high-throughput technique of AFLP mapping with subsequent direct targeting of SSRs identified in AFLP-marked regions of interest. This approach relied on the availability of peach bacterial artificial chromosome (BAC) library resources. We present examples of using this strategy to rapidly identify SSR loci tightly linked to two important, simply inherited traits in peach (Prunus persica (L.) Batsch): root-knot nematode resistance and control of the evergrowing trait. SSRs developed in this study were also tested for their transportability in other Prunus species and in apricots.     

The Chloroplast Genome of Cerasus Campanulata Diverges from Other Prunoideae Genomes

Cerasus Campanulata is one of several species belonging to the Prunoideae focke, a subfamily of the flowering plant Rosaceae. We investigated the details of its chloroplast genome which may reveal its genus independent of morphological determination. Here, we determined the complete chloroplast (cp) genome sequence of C. campanulata and performed sequence analysis to reveal the presence of 18 forward repeats, 20 palindrome repeats, 2 complement repeats, 4 reverse repeats and 93 simple sequence repeats (SSRs). We additionally performed a comparative study of C. campanulata and seven other Prunoideae focke species. Then, maximum parsimony (MP) and maximum likelihood (ML) phylogenetic analyses were carried out in the little part of Rosaceae, respectively. The results strongly support a position of C. campanulata as a member of the Cerasus in the Rosaceae family. Moreover, the complete cp genome can be used for plant phylogenetic and evolutionary studies that will provide insight into the degree of gene conservation.     

Genome-Wide Characterization and Linkage Mapping of Simple Sequence Repeats in Mei (Prunus mume Sieb. et Zucc.)

Because of its popularity as an ornamental plant in East Asia, mei (Prunus mume Sieb. et Zucc.) has received increasing attention in genetic and genomic research with the recent shotgun sequencing of its genome. Here, we performed the genome-wide characterization of simple sequence repeats (SSRs) in the mei genome and detected a total of 188,149 SSRs occurring at a frequency of 794 SSR/Mb. Mononucleotide repeats were the most common type of SSR in genomic regions, followed by di- and tetranucleotide repeats. Most of the SSRs in coding sequences (CDS) were composed of tri- or hexanucleotide repeat motifs, but mononucleotide repeats were always the most common in intergenic regions. Genome-wide comparison of SSR patterns among the mei, strawberry (Fragaria vesca), and apple (Malus×domestica) genomes showed mei to have the highest density of SSRs, slightly higher than that of strawberry (608 SSR/Mb) and almost twice as high as that of apple (398 SSR/Mb). Mononucleotide repeats were the dominant SSR motifs in the three Rosaceae species. Using 144 SSR markers, we constructed a 670 cM-long linkage map of mei delimited into eight linkage groups (LGs), with an average marker distance of 5 cM. Seventy one scaffolds covering about 27.9% of the assembled mei genome were anchored to the genetic map, depending on which the macro-colinearity between the mei genome and Prunus T×E reference map was identified. The framework map of mei constructed provides a first step into subsequent high-resolution genetic mapping and marker-assisted selection for this ornamental species.     

Construction of a cytogenetically anchored microsatellite map in rabbit

Rabbit (Oryctolagus cuniculus) represents a valuable source of biomedical models and corresponds to a small but active economic sector in Europe for meat and fur. The rabbit genome has not been thoroughly studied until recently, and high-resolution maps necessary for identification of genes and quantitative trait loci (QTL) are not yet available. Our aim was to isolate over 300 new and regularly distributed (TG)n or (TC)n rabbit microsatellites. To achieve this purpose, 164 microsatellite sequences were isolated from gene-containing bacterial artificial chromosome (BAC) clones previously localized by fluorescence in situ hybridization (FISH) on all the rabbit chromosomes. In addition, 141 microsatellite sequences were subcloned from a plasmid genomic library, and for 41 of these sequences, BAC clones were identified and FISH-mapped. TC repeats were present in 62% of the microsatellites derived from gene-containing BAC clones and in 22% of those from the plasmid genomic library, with an average of 42.9% irrespective of the microsatellite origin. These results suggest a higher proportion of (TC)n repeats and a nonhomogeneous distribution of (TG)n and (TC)n repeats in the rabbit genome compared to those in man. Among the 305 isolated microsatellites, 177 were assigned to 139 different cytogenetic positions on all the chromosomes except rabbit Chromosome 21. Sequence similarity searches provided hit locations on the Human Build 35a and hypothetical assignments on rabbit chromosomes for ten additional microsatellites. Taken together, these results report a reservoir of 305 new rabbit microsatellites of which 60% have a cytogenetic position. This is the first step toward the construction of an integrated cytogenetic and genetic map based on microsatellites homogeneously anchored to the rabbit genome.     

Computational and experimental characterization of physically clustered simple sequence repeats in plants

The type and frequency of simple sequence repeats (SSRs) in plant genomes was investigated using the expanding quantity of DNA sequence data deposited in public databases. In Arabidopsis, 306 genomic DNA sequences longer than 10 kb and 36,199 EST sequences were searched for all possible mono- to pentanucleotide repeats. The average frequency of SSRs was one every 6.04 kb in genomic DNA, decreasing to one every 14 kb in ESTs. SSR frequency and type differed between coding, intronic, and intergenic DNA. Similar frequencies were found in other plant species. On the basis of these findings, an approach is proposed and demonstrated for the targeted isolation of single or multiple, physically clustered SSRs linked to any gene that has been mapped using low-copy DNA-based markers. The approach involves sample sequencing a small number of subclones of selected randomly sheared large insert DNA clones (e.g., BACs). It is shown to be both feasible and practicable, given the probability of fortuitously sequencing through an SSR. The approach is demonstrated in barley where sample sequencing 34 subclones of a single BAC selected by hybridization to the Big1 gene revealed three SSRs. These allowed Big1 to be located at the top of barley linkage group 6HS.     

A set of simple-sequence repeat (SSR) markers covering the Prunus genome

A set of 109 microsatellite primer pairs recently developed for peach and cherry have been studied in the almond x peach F(2) progeny previously used to construct a saturated Prunus map containing mainly restriction fragment length polymorphism markers. All but one gave amplification products, and 87 (80%) segregated in the progeny and detected 96 loci. The resulting Prunus map contains a total of 342 markers covering a total distance of 522 cM. The approximate position of nine additional simple sequence repeats (SSRs) was established by comparison with other almond and peach maps. SSRs were placed in all the eight linkage groups of this map, and their distribution was relatively even, providing a genome-wide coverage with an average density of 5.4 cM/SSR. Twenty-four single-locus SSRs, highly polymorphic in peach, and each falling within 24 evenly spaced approximately 25-cM regions covering the whole Prunus genome, are proposed as a 'genotyping set' useful as a reference for fingerprinting, pedigree and genetic analysis of this species.     

Targeted isolation of simple sequence repeat markers through the use of bacterial artificial chromosomes

 Simple sequence repeats (SSRs) are versatile DNA markers that are readily assayed and highly informative. Unfortunately, non-targeted approaches to SSR development often leave large genomic regions without SSR markers. In some cases these same genomic regions are already populated by other types of DNA markers, especially restriction fragment length polymorphisms (RFLPs), random amplified polymorphic DNAs (RAPDs), and amplified fragment length polymorphisms (AFLPs). To identify SSR markers in such regions, bacterial artificial chromosome (BAC) clones can be used as intermediaries. First, one or more BAC clones in a region of interest are identified through the use of an existing DNA marker. BAC clones uncovered in this initial step are then used to create a small insert DNA library that can be screened for the presence of SSR-containing clones. Because BAC inserts are often 100-kb pairs or more in size, most contain one or more SSRs. This strategy was applied to two regions of the soybean genome near genes that condition resistance to the soybean cyst nematode on molecular linkage groups G and A2. This targeted approach to identifying new DNA markers can readily be extended to other types of DNA markers, including single nucleotide polymorphisms. Received: 13 August 1998 / Accepted: 13 October 1998     

Construction, characterization and FISH mapping of a bacterial artificial chromosome library of Chinese pangolin (Manis pentadactyla)

Chinese pangolins as a representative species in the order Pholidota have highly specified morphological characters and occupy an important place in the mammalian phylogenetic tree. To obtain genomic data for this species, we have constructed a bacterial artificial chromosome (BAC) library of Chinese pangolin. The library contains 208,272 clones with an average insert size of 122.1 kb and represents approximately eight times the Chinese pangolin haploid genome (if we assume that the Chinese pangolins have a genome size similar to human). One hundred and twenty randomly-selected BAC clones were mapped onto Chinese pangolin chromosomes by fluorescence in situ hybridization (FISH), showing a largely unbiased chromosomal distribution. Several clones containing repetitive DNA and ribosomal DNA genes were also found. The BAC library and FISH mapped BAC clones are useful resources for comparative genomics and cytogenetics of mammals and in particular, the ongoing genome sequencing project of Chinese pangolins.     

Construction and characterization of bacterial artificial chromosome library of black-handed spider monkey (Ateles geoffroyi).

The large-insert genomic DNA library is a critical resource for genome-wide genetic dissection of target species. We constructed a high-redundancy bacterial artificial chromosome (BAC) library of a New World monkey species, the black-handed spider monkey (Ateles geoffroyi). A total of 193 152 BAC clones were generated in this library. The average insert size of the BAC clones was estimated to be 184.6 kb with the small inserts (50-100 kb) accounting for less than 3% and the non-recombinant clones only 1.2%. Assuming a similar genome size with humans, the spider monkey BAC library has about 11x genome coverage. In addition, by end sequencing of randomly selected BAC clones, we generated 367 sequence tags for the library. When blasted against human genome, they showed a good correlation between the number of hit clones and the size of the chromosomes, an indication of unbiased chromosomal distribution of the library. This black-handed spider monkey BAC library would serve as a valuable resource in comparative genomic study and large-scale genome sequencing of nonhuman primates.     

Map and analysis of microsatellites in the genome of <Emphasis Type="Italic">Populus</Emphasis>: The first sequenced perennial plant

We mapped and analyzed the microsatellites throughout 284295605 base pairs of the unambiguously assembled sequence scaffolds along 19 chromosomes of the haploid poplar genome. Totally, we found 150985 SSRs with repeat unit lengths between 2 and 5 bp. The established microsatellite physical map demonstrated that SSRs were distributed relatively evenly across the genome of Populus. On average, These SSRs occurred every 1883 bp within the poplar genome and the SSR densities in intergenic regions, introns, exons and UTRs were 85.4%, 10.7%, 2.7% and 1.2%, respectively. We took di-, tri-, tetra-and pentamers as the four classes of repeat units and found that the density of each class of SSRs decreased with the repeat unit lengths except for the tetranucleotide repeats. It was noteworthy that the length diversification of microsatellite sequences was negatively correlated with their repeat unit length and the SSRs with shorter repeat units gained repeats faster than the SSRs with longer repeat units. We also found that the GC content of poplar sequence significantly correlated with densities of SSRs with uneven repeat unit lengths (tri-and penta-), but had no significant correlation with densities of SSRs with even repeat unit lengths (di-and tetra-). In poplar genome, there were evidences that the occurrence of different microsatellites was under selection and the GC content in SSR sequences was found to significantly relate to the functional importance of microsatellites.     

Development, characterization, and cross-species/genera transferability of SSR markers for rubber tree (Hevea brasiliensis)

Genomic simple sequence repeat (SSR) markers are particularly valuable in studies of genetic diversity, evolution, genetic linkage map construction, quantitative trait loci tagging, and marker-assisted selection because of their multi-allelic nature, reproducibility, co-dominant inheritance, high abundance, and extensive genome coverage. The traditional methods of SSR marker development, such as genomic-SSR hybrid screening and microsatellite enrichment, have the disadvantages of high cost and complex operation. The selectively amplified microsatellite method is less costly and highly efficient as well as being simple and convenient. In this study, 252 sequences with SSRs were cloned from the rubber tree (Hevea brasiliensis) genome from which 258 SSR loci were obtained. The average repeat number was six. There were only 10 (3.9%) mononucleotide, trinucleotide, and pentanucleotide repeats, whereas the remaining 248 (96.1%) were dinucleotide repeats, including 128 (49.6%) GT/CA repeats, 118 (45.7%) GA/CT repeats, and 2 (0.8%) AT/TA repeats. A total of 126 primer pairs (see ESM) were successfully designed of which 36 primer pairs generated polymorphic products from 12 accessions of the cultivated species, 4 related species, and 3 species of the family Euphorbiaceae. In addition, investigations based on four genomic SSRs (GAR4, ACR22, CTR25, and GTR28) by cloning and sequencing provided evidence for cross-species/genera applicability, and homologous sequences were obtained from the rubber tree and Euphorbiaceae. Further analysis about the variation of the flanking regions of the four markers was carried out.     

A BAC-based physical map of the apple genome

Genome-wide physical mapping is an essential step toward investigating the genetic basis of complex traits as well as pursuing genomics research of virtually all plant and animal species. We have constructed a physical map of the apple genome from a total of 74,281 BAC clones representing approximately 10.5x haploid genome equivalents. The physical map consists of 2702 contigs, and it is estimated to span approximately 927 Mb in physical length. The reliability of contig assembly was evaluated by several methods, including assembling contigs using variable stringencies, assembling contigs using fingerprints from individual libraries, checking consensus maps of contigs, and using DNA markers. Altogether, the results demonstrated that the contigs were properly assembled. The apple genome-wide BAC-based physical map represents the first draft genome sequence not only for any member of the large Rosaceae family, but also for all tree species. This map will play a critical role in advanced genomics research for apple and other tree species, including marker development in targeted chromosome regions, fine-mapping and isolation of genes/QTL, conducting comparative genomics analyses of plant chromosomes, and large-scale genomics sequencing.     

Map and analysis of microsatellites in the genome of Populus: The first sequenced perennial plant

Environmental Sciences Division, Oak Ridge National Laboratory, TN, USA We mapped and analyzed the microsatellites throughout 284295605 base pairs of the unambiguously assembled sequence scaffolds along 19 chromosomes of the haploid poplar genome. Totally, we found 150985 SSRs with repeat unit lengths between 2 and 5 bp. The established microsatellite physical map demonstrated tr at SSRs were distributed relatively evenly across the genome of Populus. On average, These SSRs occurred every 1883 bp within the poplar genome and the SSR densities in intergenic regions, introns, exons and UTRs were 85.4%, 10.7%, 2.7% and 1.2%, respectively. We took di-, tri-, tetra-and pentamers as the four classes of repeat units and found that the density of each class of SSRs decreased with the repeat unit lengths except for the tetranucleotide repeats. It was noteworthy that the length diversification of microsatellite sequences was negatively correlated with their repeat unit length and the SSRs with shorter repeat units gained repeats faster than the SSRs with longer repeat units. We also found that the GC content of poplar sequence significantly correlated with densities of SSRs with uneven repeat unit lengths (tri-and penta-), but had no significant correlation with densities of SSRs with even repeat unit lengths (di-and tetra-). In poplar genome, there were evidences that the occurrence of different microsatellites was under selection and the GC content in SSR sequences was found to significantly relate to the functional importance of microsatellites.     

Rapid development of gene-tagged microsatellite markers from bacterial artificial chromosome clones using anchored TAA repeat primers

We developed a technique to improve the efficiency of producing TAA repeat microsatellite markers linked to interspecific conserved genes. Template DNA was prepared from cultures derived from single bacterial artificial chromosome (BAC) colonies using a simple alkaline lysis miniprep. The presence of conserved genes in each BAC clone was verified by sequencing with gene-specific primers. The BAC templates were directly sequenced using short tandem repeat-anchored primers (STRAPs), consisting of TAA repeats with one or two unique 3' terminal bases. At least one STRAP provided sufficient 3' flanking sequence from each clone for the design of a BAC-specific primer. The BAC-specific primer was used to sequence back through the tandem repeat and obtain 5' flanking sequence, and a second BAC-specific primer was designed for microsatellite genotype analysis. This technique quickly provided microsatellite markers with an average of 15 tandem repeats for the BAC clones tested. The identification of polymorphic microsatellite loci in these clones permits the identification of alleles linked to candidate genes, placement of conserved genes on genetic linkage maps, and integration of linkage and physical maps.     

Characterization of simple sequence repeat markers derived in silico from Brassica rapa bacterial artificial chromosome sequences and their application in Brassica napus

A collaborative Brassica rapa genome sequencing project is currently in progress to aid the identification of agronomically important traits in Brassica species. As an initial stage, the ends of over 110 000 bacterial artificial chromosome clones were sequenced and mined for simple sequence repeats (SSRs). We present the characterization of 40 of these SSRs and their application in Brassica napus. The markers were screened against six Brassica species and Arabidopsis, and demonstrated reliable amplification, genome specificity, cross‐amplification and significant polymorphism. These SSRs will be useful for genetic analysis of Brassica germplasm.