Correlation of Scanning and Transmission Electron Microscopy on the Same Tissue Sample

Tissue processed for scanning electron microscopy (SEM) in a critical point bomb utilizing Freon-13 showed excellent subsurface preservation when prepared for transmission electron microscopy (TEM). The critical point method is the only commercially available SEM preparation technique in which the quality of preservation will not limit microscopists in efforts to correlate SEM and TEM observations.     

Fixation of Platelets for Scanning and Transmission Electron Microscopy

A double fixation method of preparing platelet suspensions for both scanning and transmission electron microscopy is outlined. Prefixation in 0.1% glutaraldehyde allows for immediate preservation of morphologic characteristics induced by experimental procedures, but does not completely destroy platelet surface stickiness. Preservation of surface stickiness allows subsequent production of a platelet pellet for processing for transmission electron microscopy. This pelleting cannot be achieved when higher initial concentrations of glutaraldehyde are used for prefixation. Prefixation in 0.1% glutaraldehyde is also an appropriate initial step for preservation of platelets in suspension for scanning electron microscopy.     

Scanning Electron Microscopy of Pine Seedling Wood Tissue Sections Inoculated with the Pinewood Nematode Bursaphelenchus xylophilus Previously Prepared for Light Microscopy

Scanning electron microscopy (SEM) was applied to paraffin-embedded wood sections to study the histopathology of pine seedlings inoculated with the pinewood nematode (PWN), Bursaphelenchus xylophilus. The sections, which had been previously prepared and observed by light microscopy (LM) on glass slides, were originally obtained from experiments in which pine seedlings had been inoculated with PWN. The cover glass was removed by soaking the glass slide in xylene for 3 to 5 days. The glass slides were cut into small pieces so that each piece contained one wood section. Each piece of the glass slide was attached with double adhesive tape to an aluminum stub. The specimens were sputter-coated with gold and examined with a scanning electron microscope (JEOL-JSM 5200). Compared to LM (as documented in previous reports) SEM provided greater depth of focus and resolution of the damaged wood tissues, nematodes and associated bacteria. SEM made it possible to observe the relationship between bacterial distribution and nematode distribution in wood tissues. SEM observations also suggested the possibility of documenting the death of ray cells and other parenchyma cells in relation to disease development. Finally, the current study of PWN in pine seedlings demonstrated that glass slides prepared for LM observations more than 25 years earlier could be successfully processed for examination by SEM.     

Mass Determination of Rous Sarcoma Virus Virions by Scanning Transmission Electron Microscopy

The internal structural protein of retroviruses, Gag, comprises most of the mass of the virion, and Gag itself can give rise to virus-like particles when expressed in appropriate cells. Previously the stoichiometry of Gag in virions was inferred from indirect measurements carried out 2 decades ago. We now have directly determined the masses of individual particles of the prototypic avian retrovirus, Rous sarcoma virus (RSV), by using scanning transmission electron microscopy. In this technique, the number of scattered electrons in the dark-field image integrated over an individual freeze-dried virus particle on a grid is directly proportional to its mass. The RSV virions had a mean mass of 2.5 x 10(8) Da, corresponding to about 1,500 Gag molecules per virion. The population of virions was not homogeneous, with about one-third to two-thirds of the virions deviating from the mean by more than 10% of the mass in two respective preparations. The mean masses for virions carrying genomes of 7.4 or 9.3 kb were indistinguishable, suggesting that mass variability is not due to differences in RNA incorporation.     

A Scanning Electron Microscopic Evaluation of Section and Film Mounting for Transmission Electron Microscopy

Mounting of support films and sections for transmission electron microscopy has been examined with the scanning electron microscope. Experiments have been designed to test the adherence of support films to polished and matte surfaces of specimen grids. It is the conclusion of the authors that sections and films should be mounted on the dull or matte surface of Athene-type specimen grids.     

Transmission Electron Microscopy of Tissue Culture Preparations on Polystyrene Coverslips

Polystyrene coverslips have been utilized in preparing tissue cultures for transmission electron microscopy. A method is described for processing the coverslips, including the marking of selected groups of cells with epoxy-carbon mixture. The epoxy-carbon markings aid in locating the cells during sectioning and the method can be used for small or large numbers of cells. In addition, the methodology allows high power phase contrast photography before and after fixation.     

In Situ Multiple Sampling of Attached Bacteria for Scanning and Transmission Electron Microscopy

An in situ electron microscope sampling technique for characterizing cells attached to smooth surfaces is demonstrated with an ultraviolet-induced mutant of Streptococcus mutans. The sterilized sampling unit consists of a 9 cm plastic Petri dish containing a glass slide, a 12 mm round coverglass, and a coverglass with Formvar-carbon coated copper grids. After the bacterial culture in a liquid medium is incubated in the Petri dish, the slide with attached bacteria is washed in double-distilled water, air-dried, coated with platinum and carbon, and processed for replicas and shadowed specimens for transmission electron microscopy. The coverglass is similarly washed, fixed in 2% glutaraldehyde, air- or freeze-dried, coated with palladium/gold, and examined in the scanning electron microscope. The coverglass with grids is rinsed in double distilled water, the grids are transferred to a filter paper and stained with a loopful of 2% phosphotungstic acid at pH 5.5. The bacteria growing on the surface of the plastic Petri dish are fixed, dehydrated, and embedded in situ with Epon. Sectioned and stained specimens are then examined in the transmission electron microscope. This procedure also appears useful with such other attached systems as normal or infected tissue culture cells.     

Hexamethyldisilazane for Scanning Electron Microscopy of Gastrotricha

We evaluated treatment with hexamethyldisilazane (HMDS) as an alternative to critical-point drying (CPD) for preparing microscopic Gastrotricha for scanning electron microscopy (SEM). We prepared large marine (2 mm) and small freshwater (100 μm) gastrotrichs using HMDS as the primary dehydration solvent and compared the results to earlier investigations using CPD. The results of HMDS dehydration are similar to or better than CPD for resolution of two important taxonomic features: cuticular ornamentation and patterns of ciliation. The body wall of both sculpted (Lepidodermeila) and smooth (Dolichodasys) gastrotrichs retained excellent morphology as did the delicate sensory and locomotory cilia. The only unfavorable result of HMDS dehydration was an occasional coagulation of gold residue when the solvent had not fully evaporated before sputter-coating. We consider HMDS an effective alternative for preparing of gastrotrichs for SEM because it saves time and expense compared to CPD.     

Cryo-Preservation of Roots for Scanning Electron Microscopy

Fully hydrated roots can be examined in the scanning electronmicroscope after cryo-preservation. Shrinkage associated withdehydration by freeze-drying or critical point drying, to whichroot hairs and secreted mucigel are particularly vulnerable,is avoided. Roots, Lepidium sativum, scanning electron microscopy, cryo-preservation, fully hydrated     

Transmission and Scanning Electron Microscopy of Cell Monolayers Grown on Polymethylpentene Coverslips

Plastic coverslips made of polymethylpentene serve as excellent substrates for growth of bovine endothelial cells, and are easily processed for both transmission (TEM) and scanning (SEM) electron microscopy. Portions of the same coverslip (monolayer) are used for both SEM and TEM examination and are fixed, postfixed, and dehydrated as a single entity. The portion of the coverslip for SEM is then excised, critical point dried, and mounted for sputter coating prior to viewing. The remaining piece of coverslip used for TEM is Epon-Araldite embedded, polymerized. separated from the coverslip by liquid nitrogen immersion, and sectioned either “en face” or in cross section for viewing. Coated glass coverslips are not required and organic solvents such as propylene oxide, acetone, and amyl acetate can be used for dehydration and infiltration. Furthermore, specimens do not require re-embedding or blocks to be glued onto blank capsules before sectioning. The number of cells needed to achieve a monolayer is significantly reduced compared to the usual culture flasks, but are abundant enough to assess ultrastructural changes accurately. Support films may be required to prevent folding of the ultrathin section which can obstruct viewing of cells located on the edge of the section.     

Operando Observations of SEI Film Evolution by Mass‐Sensitive Scanning Transmission Electron Microscopy

The solid electrolyte interphase (SEI) spontaneously formed on anode surfaces as a passivation layer plays a critical role in the lithium dissolution and deposition upon discharge/charge in lithium ion batteries and lithium‐metal batteries. The formation kinetics and failure of the SEI films are the key factors determining the safety, power capability, and cycle life of lithium ion and lithium‐metal batteries. Since SEI films evolve with the volumetric and interfacial changes of anodes, it is technically challenging in experimental study of SEI kinetics. Here operando observations are reported of SEI formation, growth, and failure at a high current density by utilizing a mass‐sensitive Cs‐corrected scanning transmission electron microscopy. The sub‐nano‐scale observations reveal a bilayer hybrid structure of SEI films and demonstrate the radical assisted SEI growth after the SEI thickness beyond the electron tunneling regime. The failure of SEI films is associated with rapid dissolution of inorganic layers when they directly contact with the electrolyte in broken SEI films. The initiation of cracks in SEI films is caused by heterogeneous volume changes of the electrodes during delithiation. These microscopic insights have important implications in understanding SEI kinetics and in developing high‐performance anodes with the formation of robust SEI films.     

Scanning Transmission X-Ray, Laser Scanning, and Transmission Electron Microscopy Mapping of the Exopolymeric Matrix of Microbial Biofilms

Confocal laser scanning microscopy (CLSM), transmission electron microscopy (TEM), and soft X-ray scanning transmission X-ray microscopy (STXM) were used to map the distribution of macromolecular subcomponents (e.g., polysaccharides, proteins, lipids, and nucleic acids) of biofilm cells and matrix. The biofilms were developed from river water supplemented with methanol, and although they comprised a complex microbial community, the biofilms were dominated by heterotrophic bacteria. TEM provided the highest-resolution structural imaging, CLSM provided detailed compositional information when used in conjunction with molecular probes, and STXM provided compositional mapping of macromolecule distributions without the addition of probes. By examining exactly the same region of a sample with combinations of these techniques (STXM with CLSM and STXM with TEM), we demonstrate that this combination of multimicroscopy analysis can be used to create a detailed correlative map of biofilm structure and composition. We are using these correlative techniques to improve our understanding of the biochemical basis for biofilm organization and to assist studies intended to investigate and optimize biofilms for environmental remediation applications.     

Scanning Electron Microscopy of Plant Roots

A glycol methacrylate infiltration and polymerization techniquewas used to prepare clover roots inoculated with Rhizobium forscanning reflection electron microscopy. Root hairs and epidermalcells were coated with many bacteria; some bacteria seemed tobe embedded in the wall surface. Root hair tips were often smoothbut some older root hair surfaces showed a fibrillar meshworkpattern. Small granules c. 0.18 µm diameter were presenton the root hair and epidermal cell walls. The root cap, someroot hairs, and some epidermal cells were covered by an amorphousfilm thought to be the mucigel.     

Scanning Electron Microscopy of Thermoplasma acidophilum

The scanning electron microscope was utilized to observe the morphology of the thermophilic, acidophilic mycoplasma, Thermoplasma acidophilum. Upon examination of the surface morphology, the size and shape of this unusual mycoplasma revealed its similarity to the other mycoplasmas that have been investigated.     

Scanning Electron Microscopy of Bacterial Colonies

A technique is described for observing bacterial colony growth. Bacillus cereus, B. subtilis, and B. cereus var. mycoides were grown on strips of dialysis membrane layered on nutrient agar. Microcolonies of the organisms on strips were fixed in Formalin vapor in situ; the strips then were removed from the agar and secured to scanning microscope specimen stubs without markedly disturbing the cellular arrangement. Scanning electron micrographs clearly depict morphology of individual cells, as well as the spatial orientation of cells within the colony. This technique is reproducible, adaptable, and simple.     

Examination of Virus-Infected Cultured Cells by Scanning Electron Microscopy

The scanning electron microscope (SEM) was used to detect changes in morphology of BSC-1 cells after infection with vesicular stomatitis virus (VSV) or herpes simplex virus. The morphological changes of the infected cells were related to the length of time of infection and to the virus used. Extensive alteration to the cytoplasm could be seen 24 and 48 hr after infection with 10 and 320 TCID(50) of VSV. Within 24 hr after infection with 1 TCID(50) of herpes simplex, a few nuclei were swollen. However, 72 hr after infection with 100 TCID(50) of herpesvirus, many nuclei were swollen and appeared in large aggregates, probably representing formation of a polykaryocyte. Corresponding samples stained with May-Grunwald-Giemsa were observed in the light microscope and morphological changes were compared to those seen with the SEM.