Enhanced stability of Kluyveromyces lactis β galactosidase immobilized on glutaraldehyde modified multiwalled carbon nanotubes

The present study demonstrates covalent immobilization of Kluyveromyces lactis β galactosidase on functionalized multi-walled carbon nanotubes (MWCNTs). Highly efficient surface modification of MWCNTs was achieved by glutaraldehyde for binding greater amount of enzyme. X-ray diffraction analysis and UV visible spectroscopy of MWCNTs showed them to be entirely dispersive in aqueous solution. Transmission electron microscopy showed that MWCNTs were of 20 nm size. Thermogravimetric analysis further revealed the stability of glutaraldehyde modified MWCNT as an ideal matrix for enzyme immobilization. The optimal pH for soluble and immobilized β galactosidase was observed at pH 7.0 while the optimal operating temperatures were observed at 40 °C and 50 °C, respectively. Moreover, our findings demonstrated that β galactosidase immobilized on surface functionalized MWCNTs retained greater biocatalytic activity at higher galactose concentration, and upon repeated uses as compared to enzyme in solution.     

Mixing of oxidized and bilayer phospholipids

Composition and phase dependence of the mixing of 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), and 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC), with the oxidized phospholipid, 1-palmitoyl-2-glutaryl-sn-glycero-3-phosphocholine (PGPC) were investigated by characterizing the aggregation states of DPPC/PGPC and DOPC/PGPC using a fluorescence quenching assay, dynamic light scattering, and time-resolved fluorescence quenching in the temperature range 5–60 °C. PGPC forms 3.5 nm radii micelles of aggregation number 33. In the gel phase, DPPC and PGPC fuse to form mixed vesicles for PGPC molar fraction, X_PGPC ≤ 0.3 and coexisting vesicles and micelles at higher X_PGPC. Data suggest that liquid phase DPPC at 50 °C forms mixed vesicles with segregated or hemi fused DPPC and PGPC for X_PGPC ≤ 0.3. At 60 °C, DPPC and PGPC do not mix, but form coexisting vesicles and micelles. DOPC and PGPC do not mix in any proportion in the liquid phase. Two dissimilar aggregates of the sizes of vesicles and PGPC micelles were observed for all X_PGPC for T ≥ 22 °C. DOPC–PGPC and DPPC–PGPC mixing is non-ideal for X_PGPC > 0.3 in both gel and fluid phases resulting in exclusion of PGPC from the bilayer. Formation of mixed vesicles is favored in the gel phase but not in the liquid phase for X_PGPC ≤ 0.3. For X_PGPC ≤ 0.3, aggregation states change progressively from mixed vesicles in the gel phase to component segregated mixed vesicles in the liquid phase close to the chain melting transition temperature to separated coexisting vesicles and micelles at higher temperatures.     

Immobilization of glucose oxidase onto cobalt based on silica core/shell nanoparticles as carrier

Co–B/SiO₂/NH₂ magnetic nanoparticles (NPs) were prepared from a silica shell-coated Co–B core using the Stöber method and amine-modification on the surface. Glucose oxidase (GOD) was covalently immobilized on the surface of Co–B/SiO₂/NH₂ NPs using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) as an activating agent. The magnetic NPs characteristics, such as the synthesis of Co–B/SiO₂/NH₂ NPs, effect of pH, temperature, and concentration of buffer for enzyme immobilization, were investigated. The optimal reaction conditions for immobilization were determined to be 0.1 M of phosphate buffer solution, pH 7.0, and 5 °C. In the case of immobilized GOD without d-glucose and with 0.1 M of d-glucose for blocking, 22.98 U/g and 24.83 U/g of their original activity were retained after 7 reuses, respectively.     

Response surface methodology: Synthesis of short chain fructooligosaccharides with a fructosyltransferase from Aspergillus aculeatus

A transferase was isolated, purified and characterised from Aspergillus aculeatus. The enzyme exhibited a pH and temperature optima of 6.0 and 60 °C, respectively and under such conditions remained stable with no decrease in activity after 5 h. The enzyme was purified 7.1 fold with a yield of 22.3% and specific activity of 486.1 U mg^?1 after dialysis, concentration with polyethyleneglycol (30%) and DEAE-Sephacel chromatography. It was monomeric with a molecular mass of 85 kDa and K_m and V_max values of 272.3 mM and 166.7 μmol min^?1 ml^?1. The influence of pH, temperature, reaction time, and enzyme and sucrose concentration on the formation of short-chain fructooligosaccharides (FOS) was examined by statistical response surface methodology (RSM). The enzyme showed both transfructosylation and hydrolytic activity with the transfructosylation ratio increasing to 88% at a sucrose concentration of 600 mg ml^?1. Sucrose concentration (400 mg ml^?1) temperature (60 °C), and pH (5.6) favoured the synthesis of high levels of GF₃ and GF₄. Incubation time had a critical effect on the yield of FOS as the major products were GF₂ after 4 h and GF₄ after 8 h. A prolonged incubation of 16 h resulted in the conversion of GF₄ into GF₂ as a result of self hydrolase activity.     

Development of novel flexible sugar ester vesicles as carrier systems for the antioxidant enzyme catalase for wound healing applications

The antioxidant enzyme catalase (CAT) was encapsulated in biocompatible flexible non-ionic sugar esters (SEs) nano-vesicles for potential topical administration. The effects of the SE hydrophilic lipophilic balance (HLB) value and the carbon chain length of the fatty acid ester of different SEs on the encapsulation efficiency (EE) were studied. Morphology of the vesicles was not altered upon CAT encapsulation using freeze fracture electron microscopy. The extrusion measurements indicated that there was an increase in the vesicle's flexibility index upon the inclusion of phospholipids. The mean diameter of the CAT-EV (ester vesicle; HSC and HSC–PL) was 222–275 nm using laser diffraction measurements. The catalytic efficiency (V_max/K_m) of CAT was improved after encapsulation by a factor of 1.7. Both free CAT and CAT-EV showed maximum catalytic activity at pH 7.0, and CAT-EV was more stable than free CAT at acidic pH, which is advantageous for successful topical delivery. Encapsulation of CAT in SE vesicles protected it against trypsin treatment. Encapsulated CAT retained more than 60% residual activity after 12 successive decomposition cycles of H₂O₂. CAT-EV activity was significantly preserved compared to that of free CAT at 4 °C for 180 days. The in vivo study showed a significant effect of the prepared CAT nano-vesicles on wound healing.     

Magnetic nanocomposite of anti-human IgG/COOH-multiwalled carbon nanotubes/Fe₃O₄ as a platform for electrochemical immunoassay

An electrochemical immunosensing method was developed based on a magnetic nanocomposite. The multiwalled carbon nanotubes (MWCNTs) were treated with nitric acid to produce carboxyl groups at the open ends. Then, Fe₃O₄ nanoparticles were deposited on COOH–MWCNTs by chemical coprecipitation of Fe²⁺ and Fe³⁺ salts in an alkaline solution. Goat anti-human IgG (anti-hIgG) was covalently attached to magnetic nanocomposite through amide bond formation between the carboxylic groups of MWCNTs and the amine groups of anti-hIgG. The prepared bio-nanocomposite was used for electrochemical sensing of human tetanus IgG (hIgG) as a model antigen. The anti-hIgG magnetic nanocomposite was fixed on the surface of a gold plate electrode using a permanent magnet. The hIgG was detected using horseradish peroxidase (HRP)-conjugated anti-hIgG in a sandwich model. Electrochemical detection of hIgG was carried out in the presence of H₂O₂ and KI as substrates of HRP. Using this method, hIgG was detected in a concentration range from 30 to 1000 ng ml^?1 with a correlation coefficient of 0.998 and a detection limit of 25 ng ml^?1 (signal/noise = 3). The designed immunosensor was stable for 1 month.     

A new use of β-Ala-Lys (AMCA) as a transport reporter for PEPT1 and PEPT2 in renal brush border membrane vesicles from the outer cortex and outer medulla

Integral membrane proteins PEPT1 and PEPT2 are essential for reabsorbing almost all hydrolysed or filtered di- and tripeptides alongside a wide range of peptidomimetic drugs in the kidney. The aim of this study was to investigate the potential use of the fluorophore-conjugated dipeptide β-Ala-Lys (AMCA) as a biosensor for measuring peptide transport activity in brush border membrane vesicles isolated from the outer cortex (BBMV-OC) and outer medulla (BBMV-OM) (representing PEPT1 and PEPT2 respectively). The vesicles were isolated using a dual magnesium precipitation and centrifugation technique. Intravesicular fluorescence accumulation was measured after incubating extra-vesicular media at pH 6.6 and different concentrations of β-Ala-Lys (AMCA) with vesicles pre-equilibrated at pH 7.4. Both BBMV-OC and BMMV-OM showed accumulation of an intravesicular fluorescence signal after 20 min incubation. Changing the extra-vesicular pH to 7.4 caused a significant reduction in the β-Ala-Lys (AMCA) uptake into BBMV-OC at concentrations > 100 μM. When different concentrations of dipeptide, Gly-Gln was added, there was a significant inhibition of 100 μM β-Ala-Lys (AMCA) uptake into BBMV-OC and BMMV-OM, reaching 69% and 80%, respectively. Kinetic analysis of β-Ala-Lys (AMCA) at 20 min showed that the K_m and V_max were 783.7 ± 115.7 μM and 2191.2 ± 133.9 ΔF/min/mg for BBMV-OC, while BMMV-OM showed significantly higher affinity, but lower capacity at K_m = 93.6 ± 21.9 μM and V_max = 935.8 ± 50.2 ΔF/min/mg. These findings demonstrate the applicability of β-Ala-Lys (AMCA) as a biosensor to measure the transport activity of the renal-type PEPT1 and PEPT2 in BBMV-OC and BMMV-OM respectively.     

Immobilization of Bacillus subtilis esterase by simple cross-linking for enzymatic resolution of dl-menthyl acetate

A recombinant esterase (EC 3.1.1.1) cloned from Bacillus subtilis 0554 (BSE) was carrier-freely immobilized with the method of cross-linked enzyme aggregates. The conditions for preparing the cross-linked aggregates of BSE (CLA-BSE) were optimized, including the type and concentration of precipitants, and the concentration of cross-linker, and a simple and efficient procedure for preparing CLA-BSE was developed, consisting of a precipitation step with 0.5 g mL⁻¹ (NH₄)₂SO₄ and a cross-linking step with 60 mM glutaraldehyde for a period of 3 h as the cross-linking time. As a result, about 70% of the initial free BSE activity was incorporated into the CLA-BSE. The thermal stabilities of the immobilized enzyme at 30 °C and 50 °C were >360 and 14 times those of free BSE, respectively. More importantly, the operational stability of CLA-BSE was also considerably improved. In the kinetic resolution of dl-menthyl acetate to produce l-menthol with CLA-BSE gave ee_p > 94% at conversion of >40% and the CLA-BSE could be reused for 10 times with only about 8% reduction in activity. Therefore, the new biocatalyst immobilized through the methodology of CLEAs could significantly decrease the manufacturing cost of l-menthol and would be more beneficial for its practical applications.     

Shape and surface properties of titanate nanomaterials influence differential cellular uptake behavior and biological responses in THP-1 cells

We investigated cellular uptake behavior and biological responses of spherical and fibrous titanate nanomaterials in human monocyte THP-1 cells. Two titanate nanofibers (TiNFs), namely TF-1 and TF-2, were synthesized from anatase TiO₂ nanoparticles (TNPs) via hydrothermal treatment. The synthesized TiNFs and TNPs were thoroughly characterized for their size, crystallinity, surface area and surface pH. TF-1 (～2 µm in length) was amorphous with an acidic surface, while TF-2 (～7 µm in length) was brookite with a basic surface. The results demonstrated that none of these titanate nanomaterials resulted in significant cytotoxicity, even at the highest doses tested (50 µg/ml), consistent with an absence of ROS generation and lack of change of mitochondrial membrane potential. While no cytotoxic effect was found in the titanate nanomaterials, TF-2 tended to decrease the proliferation of THP-1 cells. Furthermore, TF-2 resulted in an inflammatory cytokine response, as evidenced by dramatic induction of IL-8 and TNF-α release in TF2 but not TF-1 nor TNPs. These results suggest that shape of titanate nanomaterials plays an important role in cellular internalization, while surface pH may play a prominent role in inflammatory response in THP-1 cells.     

A novel structural specific creatinine sensing scheme for the determination of the urine creatinine

In this work, a highly structural dependent amperometric scheme was proposed for the determination of creatinine without enzymatic assistance. The principle of this novel method is based upon the formation of a soluble copper–creatinine complex on the copper electrode surface. Subsequently, an oxidative current from the regeneration of the surface oxide layer is monitored and it is proportional to the concentration of the creatinine. This scheme can be conducted at potential of ?0.1 V (vs. Ag/AgCl, 3 M) in phosphate buffer (pH 7). A typical calibration plot from 25 μg/dL to 1.5 mg/dL (R² = 0.997) with a detection limit of 6.8 μg/dL (S/N = 3) is achieved. The relative standard deviation of 21 successive injections of 0.2 mg/dL creatinine is 0.018. Under the optimal conditions, the frequently encountered biological interferences at physiological or higher concentration were investigated. Only uric acid revealed an obvious interference (298.1%). However, a Nafion^® coated copper plating electrode shows a successful decrement of the interference of the uric acid with slightly decreased sensitivity of creatinine. The feasibility of this scheme for further clinical application is demonstrated by both HPLC and FIA to evaluate the creatinine concentration in a urine sample.     

Positive correlation between plasma nitrite and performance during high-intensive exercise but not oxidative stress in healthy men

Several studies suggest that exercise is associated with elevated oxidative stress which diminishes NO bioavailability. The aim of the present study was to investigate a potential link between NO synthesis and bioavailability and oxidative stress in the circulation of subjects performing high-intensive endurance exercise. Twenty-two male healthy subjects cycled at 80% of their maximal workload. Cubital venous blood was taken before, during and after exercise, and heparinized plasma was generated. Plasma concentrations of nitrite and nitrate were quantified by GC–MS and of the oxidative stress biomarker 15(S)-8-iso-PGF_2α by GC–MS/MS. pH and pCO₂ fell and HbO₂ increased upon exercise. The duration of the 80% phase (d80) was 740 ± 210 s. Subjects cycled at 89.2 ± 3.3% of their peak oxygen uptake. Plasma concentration of nitrite (P < 0.01) and 15(S)-8-iso-PGF_2α (P < 0.05) decreased significantly during exercise. At the end of exercise, plasma nitrite concentration correlated positively with d80 and performed work (w80) (each P < 0.05). Changes in nitrate concentration also correlated positively with d80 (P < 0.05) and w80/kg (P < 0.01). These findings provide evidence of a favorable effect of nitrite on high-intensive endurance exercise. The lack of association between 15(S)-8-iso-PGF_2α and NO bioavailability (nitrite concentration) and NO biosynthesis (nitrate concentration) suggest that oxidative stress, notably lipid peroxidation, is not linked to the l-arginine/NO pathway in healthy male subjects being on endurance exercise.     

Immobilization of horseradish peroxidase on activated wool

This work is aimed to immobilize partially purified horseradish peroxidase (HRP) on wool activated by multifunctional reactive center, namely cyanuric chloride. The effect of cyanuric chloride concentration, pH and enzyme concentration on immobilization of HRP was studied. FT-IR and SEM analyses were detected for wool, activated wool and immobilized wool-HRP. The wool-HRP, prepared at 2% (w/v) cyanuric chloride and pH 5.0, retained 50% of initial activity after seven reuses. The wool-HRP showed broad optimum pH at 7.0 and 8.0, which was higher than that of the soluble HRP (pH 6.0). The soluble HRP had an optimum temperature of 30 °C, which was shifted to 40 °C for immobilized enzyme. The soluble and wool-HRP were stable up to 30 and 40 °C after incubation for 1 h, respectively. The apparent kinetic constant values (K_ms) of wool-HRP were 10 mM for guiacol and 2.5 mM for H₂O₂, which were higher than that of soluble HRP. The wool-HRP was remarkably more stable against proteolysis mediated by trypsin. The wool-HRP exhibited more resistance to heavy metal induced inhibition. The wool-HRP was more stable to the denaturation induced by urea, Triton X-100, isopropanol, butanol and dioxan. The wool-HRP was found to be the most stable under storage. In conclusion, the wool-HRP could be more suitable for several industrial and environmental purposes.     

Ethanol/O2 biofuel cell using a biocathode consisting of laccase/ HOOC-MWCNTs/polydiallyldimethylammonium chloride

In the present report we focused on the substitution of metallic catalysts by biocatalysts to develop a high efficient biofuel cell. A bioanode and a biocathode were designed using ADH and laccase, respectively. Carboxylated multiwall carbon nanotubes (HOOC-MWCNTs) and polydiallyldimethylammonium chloride (PDDA) were used for immobilizing the enzymes on either polymethylene green (PMG) modified glassy carbon or graphite electrodes. In this way, an ethanol–oxygen biofuel cell was designed in which PDDA/ADH/PDDA/HOOC-MWCNTs/PMG/GC and PDDA/Lac/PDDA/HOOC-MWCNTs/PMG/Gr operated as bioanode and biocathode, respectively. In the optimized condition of O₂ saturated PBS (0.1 M, pH 7.5) containing 1 mM ethanol and 1 mM NAD⁺ the open-circuit voltage reached to a plateau at 504 mV based of which the power density of 3.98 mW cm⁻² was obtained.     

pH alters the swimming behaviors of the raphidophyte Heterosigma akashiwo: Implications for bloom formation in an acidified ocean

We investigated the effects of pH on movement behaviors of the harmful algal bloom causing raphidophyte Heterosigma akashiwo. Motility parameters from >8000 swimming tracks of individual cells were quantified using 3D digital video analysis over a 6-h period in 3 pH treatments reflecting marine carbonate chemistry during the pre-industrial era, currently, and the year 2100. Movement behaviors were investigated in two different acclimation-to-target-pH conditions: instantaneous exposure and acclimation of cells for at least 11 generations. There was no negative impairment of cell motility when exposed to elevated PCO₂ (i.e., low pH) conditions but there were significant behavioral responses. Irrespective of acclimation condition, lower pH significantly increased downward velocity and frequency of downward swimming cells (p < 0.001). Rapid exposure to lower pH resulted in 9% faster downward vertical velocity and up to 19% more cells swimming downwards (p < 0.001). Compared to pH-shock experiments, pre-acclimation of cells to target pH resulted in ~30% faster swimming speed and up to 46% faster downward velocities (all p < 0.001). The effect of year 2100 PCO₂ levels on population diffusivity in pre-acclimated cultures was >2-fold greater than in pH-shock treatments (2.2 × 10⁵ μm² s⁻¹ vs. 8.4 × 10⁴ μm² s⁻¹). Predictions from an advection-diffusion model, suggest that as PCO₂ increased the fraction of the population aggregated at the surface declined, and moved deeper in the water column. Enhanced downward swimming of H. akashiwo at low pH suggests that these behavioral responses to elevated PCO₂ could reduce the likelihood of dense surface slick formation of H. akashiwo through reductions in light exposure or growth independent surface aggregations. We hypothesize that the HAB alga's response to higher PCO₂ may exploit the signaling function of high PCO₂ as indicative of net heterotrophy in the system, thus indicative of high predation rates or depletion of nutrients.     

Short-time pre-washing of brushite-forming calcium phosphate cement improves its in vitro cytocompatibility

A pre-washing protocol was developed for resorbable, brushite-forming calcium phosphate cements (CPCs) to avoid harmful in vitro effects on cells. CPC discs (JectOS+, Kasios; self-developed CPC) were pre-washed with repeated changes of phosphate-buffered saline (PBS; 24 h total). Unwashed or PBS-pre-washed discs were incubated in culture medium (5% fetal calf serum; up to 10 days) and then tested for their influence on pH/calcium/phosphate levels in H₂O extracts. Effects on pH/calcium/phosphate levels in culture supernatants, and morphology, adherence, number, and viability of ATDC5 cells and adipose-tissue derived stem cells were analyzed in co-culture. Pre-washing did not alter CPC surface morphology or Ca/P ratio (scanning electron microscopy; energy-dispersive X-ray spectroscopy). However, acidic pH of unwashed JectOS+ and self-developed CPC (5.82; 5.11), and high concentrations of Ca (2.17; 2.40 mM) and PO₄ (38.15; 49.28 mM) in H₂O extracts were significantly counteracted by PBS-pre-washing (pH: 7.92; 7.92; Ca: 0.64; 1.11 mM; PO₄: 5.39–5.97 mM). Also, PBS-pre-washing led to physiological pH (approx. 7.5) and PO₄ levels (max. 5 mM), and sub-medium Ca levels (0.5–1 mM) in supernatants and normalized cell morphology, adherence, number, and viability. This CPC pre-washing protocol improves in vitro co-culture conditions without influencing its structure or chemical composition.     

An amperometric H2O2 biosensor based on cytochrome c immobilized onto nickel oxide nanoparticles/carboxylated multiwalled carbon nanotubes/polyaniline modified gold electrode

Cytochrome c was immobilized covalently onto nickel oxide nanoparticles/carboxylated multiwalled carbon nanotubes/polyaniline composite (NiO-NPs/cMWCNT/PANI) electrodeposited on gold (Au) electrode. An amperometric H₂O₂ biosensor was constructed by connecting this modified Au electrode along Ag/AgCl as reference and Pt wire as counter electrode to the galvanostat. The modified Au electrode was characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and Fourier transform infra-red spectroscopy (FTIR). Cyclic voltammetric (CV) studies of the electrode at different stages demonstrated that the modified Au electrode had enhanced electrochemical oxidation of H₂O₂, which offered a number of attractive features to develop an amperometric biosensor based on split of H₂O₂. There was a good linear relationship between the current (mA) and H₂O₂ concentration in the range 3–700 μM. The sensor had a detection limit of 0.2 μM (S/N = 3) with a high sensitivity of 3.3 mA μM^?1 cm^?2. The sensor gave accurate and satisfactory results, when employed for determination of H₂O₂ in different fruit juices.     

Effect of changing the nanoscale environment on activity and stability of nitrate reductase

Nitrate reductase (NR) is employed for fabrication of nitrate sensing devices in which the enzyme in immobilized form is used to catalyze the conversion of nitrate to nitrite in the presence of a suitable cofactor. So far, instability of immobilized NR due to the use of inappropriate immobilization matrices has limited the practical applications of these devices. Present study is an attempt to improve the kinetic properties and stability of NR using nanoscale iron oxide (nFe₃O₄) and zinc oxide (nZnO) particles. The desired nanoparticles were synthesized, surface functionalized, characterized and affixed onto the epoxy resin to yield two nanocomposite supports (epoxy/nFe₃O₄ and epoxy/nZnO) for immobilizing NR. Epoxy/nFe₃O₄ and epoxy/nZnO support could load as much as 35.8 ± 0.01 and 33.20 ± 0.01 μg/cm² of NR with retention of about 93.72 ± 0.50 and 84.81 ± 0.80% of its initial activity respectively. Changes in surface morphology and chemical bonding structure of both the nanocomposite supports after addition of NR were confirmed by scanning electron microscopy (SEM) and fourier transform infrared spectroscopy (FTIR). Optimum working conditions of pH, temperature and substrate concentration were ascertained for free as well as immobilized NR preparations. Further, storage stability at 4 °C and thermal stability between 25–50 °C were determined for all the NR preparations. Analytical applications of immobilized NR for determination of soil and water nitrates along with reusability data has been included to make sure the usefulness of the procedure.     

Hexavalent chromium removal from aqueous solution by adsorption on treated sawdust

The studies on adsorption of hexavalent chromium were conducted by varying various parameters such as contact time, pH, amount of adsorbent, concentration of adsorbate and temperature. The kinetics of adsorption of Cr(VI) ion followed pseudo second order. Langmuir adsorption isotherm was employed in order to evaluate the optimum adsorption capacity of the adsorbent. The adsorption capacity was found to be pH dependant. Sawdust was found to be very effective and reached equilibrium in 3 h (adsorbate concentration 30 mg l⁻¹). The rate constant has been calculated at 303, 308, 313 and 318 K and the activation energy (E_a) was calculated using the Arrhenius equation. Thermodynamic parameters such as standard Gibbs energy (ΔG°) and heat of adsorption (ΔH_r) were calculated. The ΔG° and ΔH_r values for Cr(VI) adsorption on the sawdust showed the process to be exothermic in nature. The percentage of adsorption increased with decrease in pH and showed maximum removal of Cr(VI) in the pH range 4.5–6.5 for an initial concentration of 5 mg l⁻¹.     

Short-term effects of experimental burning on soil nutrients in the Cantabrian heathlands

The aim of this study is to determine the short-term effects of fire on nitrogen and phosphorus soil concentration in heathland sites dominated by Calluna vulgaris in the Cantabrian Mountain range (NW Spain). Three C. vulgaris heathlands sites (San Isidro, Riopinos I and Riopinos II) were selected. In June 2005, one plot (20 m × 20 m) per site was subjected to an experimental fire and the other was used as a control. Immediately after the fire, ten ash samples and ten soil samples (at a depth of 5 cm) were collected and thoroughly mixed. Soil moisture, temperature, total N, NH₄⁺, NO₃^?, total P, available P and pH were determined in each sample. The quantity of ashes deposited was 300 g/m², with a pH of 9, low N content but higher P concentrations. Significant differences in temperature and soil moisture were detected between the fire-treated and control plots. No significant differences for soil pH, total and available P, total N and NO₃^? concentration were found between the treatments. However, the concentration of ammoniacal-N indicated a significant increase 11 months post-fire and was produced by the changes in environmental soil conditions after the fire. Our results show that low intensity fires do not modify the concentration of N and P in the soil. However, post-fire conditions favour an increase in ammoniacal-N one year later.     

Optimization of osmotic shock process variables for enhancement of the release of periplasmic interferon-α2b from Escherichia coli using response surface method

The osmotic shock process for the release of periplasmic recombinant human interferon-α2b from Escherichia coli was optimized using response surface method (RSM). The process parameters such as pH, buffer concentration and sucrose concentration in hypertonic solution, cell concentration to hypertonic solution, contact time of cells with hypertonic solution, temperature of hypertonic solution, cell concentration to hypotonic solution, contact time of cells with hypotonic solution and temperature of hypotonic solution were initially screened using Plackett Burman design. Further optimization was carried out using central composite design (one of the design in RSM) for sucrose concentration in hypertonic solution as well as cell concentration to hypertonic and hypotonic solutions. The optimal cell concentration was 0.05 g/mL in hypertonic solution and 0.2 g/mL in hypotonic solution. The use of hypertonic solution containing 18% sucrose with a combination of 100 mM Tris and 2.5 mM EDTA buffer (pH 8.0 and 25 °C) and cold water (4 °C) as a hypotonic solution gave the optimum release of interferon-α2b. Increased product concentration in the final solution resulted from the optimized process would reduce the downstream steps during purification. The concept of reuse of hypertonic solution was also demonstrated.