Structure of a streptococcal adhesin carbohydrate receptor

Interactions between complementary protein and carbohydrate structures on different genera of human oral bacteria have been implicated in the formation of dental plaque. The carbohydrate receptor on Streptococcus sanguis H1 (one of the primary colonizing species) that is specific for the adhesin on Capnocytophaga ochracea ATCC 33596 (a secondary colonizer) has been isolated from the streptococcal cell wall, purified, and structurally characterized. The hexasaccharide repeating unit of the polysaccharide was purified by reverse-phase, amino-bonded silica, and gel permeation high performance liquid chromatography. Earlier studies established that the repeating unit was a hexasaccharide composed of rhamnose, galactose, and glucose in the ration of 2:3:1, respectively. In the present study, determination of absolute configuration by gas chromatography of the trimethylsilyl (+)-2-butyl glycosides revealed that the rhamnose residues were of the L configuration while the hexoses were all D. 252Californium plasma desorption mass spectrometry of the native, the acetylated and the reduced and acetylated hexasaccharide determined that the molecular mass of the native hexasaccharide was 959, and that the 2 rhamnose residues were linked to each other at the nonreducing terminus of the linear molecule. Methylation analysis revealed the positions of the glycosidic linkages in the hexasaccharide and showed that a galactose residue was present at the reducing end. The structural characterization of the hexasaccharide was completed by one and two dimensional 1H and 13C NMR spectroscopy. Complete 1H and 13C assignments for each glycosyl residue were established by two-dimensional (1H,1H) correlation spectroscopy, homonuclear Hartmann-Hahn, and (13C,1H) correlation experiments. The configurations of the glycosidic linkages were inferred from the chemical shifts and coupling constants of the anomeric 1H and 13C resonances. The sequence of the glycosyl residues was determined by a heteronuclear multiple bond correlation experiment. These data show that the structure of the hexasaccharide repeating unit derived from the cell wall polysaccharide of S. sanguis H1 is: alpha-L-Rhap-(1----2)-alpha-L-Rhap-(1----3)-alpha-D-Galp- (1----3)-beta-D-Galp-(1----4)-beta-D-Glcp-(1----3)-alpha/beta-D-Gal.     

A polysaccharide from Streptococcus sanguis 34 that inhibits coaggregation of S. sanguis 34 with Actinomyces viscosus T14V.

Coaggregation between Actinomyces viscosus T14V and Streptococcus sanguis 34 depends on interaction of a lectin on A. viscosus T14V with a cell surface carbohydrate on S. sanguis 34. This carbohydrate was isolated, and its chemical makeup was established. The carbohydrate remained attached to S. sanguis 34 cells through extraction with Triton X-100 and treatment with pronase. It was cleaved from the cell residue by autoclaving and purified by differential centrifugation and column chromatography on DEAE-Sephacel and Sephadex G-75. The polysaccharide contained phosphate which was neither inorganic nor monoester. Treatment with NaOH-NaBH4, followed by Escherichia coli alkaline phosphatase, or with 48% HF at 4 degrees C, followed by NaBH4, yielded inorganic phosphate and oligosaccharide alditols. Therefore, the polysaccharide is composed of oligosaccharide units joined together by phosphodiester bridges. The structure and stereochemistry of the main oligosaccharide alditol was established previously (F. C. McIntire, C. A. Bush, S.-S. Wu, S.-C. Li, Y.-T. Li, M. McNeil, S. Tjoa, and P. V. Fennessey, Carbohydr. Res. 166:133-143). Permethylation analysis, 1H and 31P nuclear magnetic resonance studies on the whole polysaccharide revealed the position of the phosphodiester linkages. The polysaccharide is mainly a polymer of (6) GalNAc(alpha 1-3)Rha(beta 1-4)Glc(beta 1-6)Galf(beta 1-6)GalNAc(beta 1- 3)Gal(alpha 1)-OPO3. It reacted as a single antigen with antiserum to S. sanguis 34 cells and was a potent inhibitor of coaggregation between A. viscosus T14V and S. sanguis 34. Quantitative inhibition of precipitation assays with oligosaccharides, O-allyl N-acetylgalactosaminides, and simple sugars indicated that specific antibodies were directed to the GalNAc end of the hexasaccharide unit. In contrast, coaggregation was inhibited much more effectively by saccharides containing betaGalNAc. Thus, the specificity of the A. viscosus T14V lectin is strikingly different from that of antibodies directed against the S. sanguis 34 polysaccharide.     

Complete structure of the adhesin receptor polysaccharide of Streptococcus oralis ATCC 55229 (Streptococcus sanguis H1).

This report describes the determination of the complete primary structure of the adhesin receptor polysaccharide of Streptococcus oralis ATCC 55229 (previously characterized as Streptococcus sanguis H1), a Gram-positive bacteria implicated in dental plaque formation. The polysaccharide was isolated from S. oralis ATCC 55229 cells after deproteination, enzymatic hydrolysis, and ion exchange chromatography. It was shown to consist of rhamnose, galactose, glucose, glycerol, and phosphate, in molar ratios of 2:3:1:1:1. Sequence and linkage assignments of the glycosyl residues were obtained by methylation analysis followed by gas-liquid chromatography and electron-impact mass spectrometry. 31P NMR spectroscopy revealed that phosphate was present in a diester, connecting glycerol to one of the galactosyl residues. High-performance liquid chromatography of a partial acid hydrolysate of the polysaccharide confirmed this finding by showing galactose 6-phosphate and glycerol 1-phosphate. The structural determination was completed by the combination of two-dimensional homonuclear Hartmann-Hahn and NOE experiments and heteronuclear [1H,13C] and [1H,31P] multiple-quantum coherence experiments. Thus, the adhesin receptor polysaccharide of S. oralis ATCC 55229 was found to be a polymer composed of hexasaccharide repeating units that contain glycerol linked through a phosphodiester to C6 of the alpha-galactopyranosyl residue and are joined end-to-end through galactofuranosyl-beta(1-->3)-rhamnopyranosyl linkages: [formula: see text] This structure is novel among bacterial cell surface polysaccharides in general and specifically among those implicated in dental plaque formation.     

Molecular and antigenic characterization of a Streptococcus oralis coaggregation receptor polysaccharide by carbohydrate engineering in Streptococcus gordonii

The coaggregation receptor polysaccharides (RPS) of Streptococcus oralis and related species are recognized by lectin-like adhesins on other members of the oral biofilm community and by RPS-specific antibodies. The former interactions involve beta-GalNAc or beta-Gal containing host-like motifs in the oligosaccharide repeating units of these polysaccharides, whereas the latter involves features of these molecules that are immunogenic. In the present investigation, the molecular and corresponding structural basis for the serotype specificity of S. oralis ATCC 10557 RPS was determined by engineering the production of this polysaccharide in transformable Streptococcus gordonii 38. This involved the systematic replacement of genes in the rps cluster of strain 38 with different but related genes from S. oralis 10557 and structural characterization of the resulting polysaccharides. The results identify four unique genes in the rps cluster of strain 10557. These include wefI for an alpha-Gal transferase, wefJ for a GalNAc-1-phosphotransferase that has a unique acceptor specificity, wefK for an acetyl transferase that acts at two positions in the hexasaccharide repeating unit, and a novel wzy associated with the beta1-3 linkage between these units. The serotype specificity of engineered polysaccharides correlated with the wefI-dependent presence of alpha-Gal in these molecules rather than with partial O-acetylation or with the linkage between repeating units. The findings illustrate a direct approach for defining the molecular basis of polysaccharide structure and antigenicity.     

Structural elucidation of the nonclassical secondary cell wall polysaccharide from Bacillus cereus ATCC 10987. Comparison with the polysaccharides from Bacillus anthracis and B. cereus type strain ATCC 14579 reveals both unique and common structural features

Nonclassical secondary cell wall polysaccharides constitute a major cell wall structure in the Bacillus cereus group of bacteria. The structure of the secondary cell wall polysaccharide from Bacillus cereus ATCC 10987, a strain that is closely related to Bacillus anthracis, was determined. This polysaccharide was released from the cell wall with aqueous hydrogen fluoride (HF) and purified by gel filtration chromatography. The purified polysaccharide, HF-PS, was characterized by glycosyl composition and linkage analyses, mass spectrometry, and one- and two-dimensional NMR analysis. The results showed that the B. cereus ATCC 10987 HF-PS has a repeating oligosaccharide consisting of a -->6)-alpha-GalNAc-(1-->4)-beta-ManNAc-(1-->4)-beta-GlcNAc-(1--> trisaccharide that is substituted with beta-Gal at O3 of the alpha-GalNAc residue and nonstoichiometrically acetylated at O3 of the N-acetylmannosamine (ManNAc) residue. Comparison of this structure with that of the B. anthracis HF-PS and with structural data obtained for the HF-PS from B. cereus type strain ATCC 14579 revealed that each HF-PS had the same general structural theme consisting of three HexNAc and one Hex residues. A common structural feature in the HF-PSs from B. cereus ATCC 10987 and B. anthracis was the presence of a repeating unit consisting of a HexNAc(3) trisaccharide backbone in which two of the three HexNAc residues are GlcNAc and ManNAc and the third can be either GlcNAc or GalNAc. The implications of these results with regard to the possible functions of the HF-PSs are discussed.     

Novel oligosaccharides obtained by bacteriophage degradation of the polysaccharide from Klebsiella serotype K26

Bacteriophage phi 26 was used to depolymerize the polysaccharide of Klebsiella K26, yielding three oligosaccharides. The major product was the heptasaccharide repeating unit, with one of the minor products being the fourteen-sugar oligosaccharide corresponding to two repeating units. The other minor product was unusual since it was a hexasaccharide devoid of the terminal, pyruvate-containing galactose unit present in the side chain of the normal repeating unit. Phage phi 26 was shown to act as a beta-galactosidase, and hence it may have the ability to remove the terminal beta-galactose residue in the side chain.     

Structure of the O-polysaccharide from the Azospirillum lipoferum Sp59b lipopolysaccharide

A neutral O-specific polysaccharide was obtained by mild acid hydrolysis of the lipopolysaccharide of the plant-growth-promoting bacterium Azospirillum lipoferum Sp59b. On the basis of sugar and methylation analyses along with 1D and 2D (1)H and (13)C NMR spectroscopy, including a NOESY experiment, the following structure of the branched hexasaccharide repeating unit of the O-polysaccharide was established: [carbohydrate structure: see text].     

Antigenic polysaccharides of Shigella bacteria. Structure of the polysaccharide chain of the lipopolysaccharide from Shigella boydii, type 11]

On mild acid degradation of the Shigella boydii, type 11 lipopolysaccharide, the corresponding O-specific polysaccharide composed of D-glucuronic acid, 2-acetylamino-2-deoxy-D-glucose, D-ribose and L-rhamnose residues in the ratio 1:1:1:3 was obtained. Methylation, partial acid hydrolysis and 13C-NMR spectral data for the polysaccharide led to the structure of the oligosaccharide repeating unit as a branched hexasaccharide: [formula: see text]. Numerous O-acetyl groups attached non-stoichiometrically to the residues of D-glucuronic acid, L-rhamnose and 2-acetylamino-2-deoxy-D-glucose were located with the use of 13C-NMR spectroscopy.     

Complete structure of the cell surface polysaccharide of Streptococcus oralis C104: a 600-MHz NMR study

Specific lectin-carbohydrate interactions between certain oral streptococci and actinomyces contribute to the microbial colonization of teeth. The receptor molecules of Streptococcus oralis, 34, ATCC 10557, and Streptococcus mitis J22 for the galactose and N-acetylgalactosamine reactive fimbrial lectins of Actinomyces viscosus and Actinomyces naeslundii are antigenically distinct polysaccharides, each formed by a different phosphodiester-linked oligosaccharide repeating unit. These streptococci all coaggregated strongly with both A. viscosus and A. naesludii strains, whereas S. oralis C104 interacted preferentially with certain strains of the latter species. Receptor polysaccharide was isolated from S. oralis C104 cells and was shown to contain galactose, N-acetylgalactosamine, ribitol, and phosphate with molar ratios of 4:1:1:1. The 1H NMR spectrum of the polysaccharide shows that it contains a repeating structure. The individual sugars in the repeating unit were identified by 1H coupling constants observed in E-COSY and DQF-COSY spectra. NMR methods included complete resonance assignments (1H and 13C) by various homonuclear and heteronuclear correlation experiments that utilize scalar couplings. Sequence and linkage assignments were obtained from the heteronuclear multiple-bond correlation (HMBC) spectrum. This analysis shows that the receptor polysaccharide of S. oralis C104 is a ribitol teichoic acid polymer composed of a linear hexasaccharide repeating unit containing two residues each of galactopyranose and galactofuranose and a residue each of GalNAc and ribitol joined end to end by phosphodiester linkages with the following structure. [----6)Galf(beta 1----3)Galp(beta 1----6)Galf(beta 1----6)GalpNAc(beta 1----3) Galp(alpha 1----1)ribitol(5----PO4-]n     

Structure of a viscous exopolysaccharide produced by Lactobacillus helveticus K16

A viscous extracellular polysaccharide produced by Lactobacillus helveticus K16 has been investigated. Sugar and methylation analysis, 1H and 13C NMR spectroscopy revealed that the polysaccharide is composed of a hexasaccharide repeating unit. The sequence of sugar residues was determined by use of two-dimensional nuclear Overhauser effect spectroscopy and heteronuclear multiple bond connectivity experiments. The structure of the repeating unit of the exopolysaccharide from L. helveticus K16 is as follows: carbohydrate sequence [see text].     

Bacterial antigenic polysaccharides. 12. Structure and 13C NMR spectrum of the polysaccharide chain of Shigella boydii type 8 lipopolysaccharide

A specific acidic polysaccharide was isolated from Sh. boydii type 8 antigenic lipopolysaccharide after mild hydrolysis followed by chromatography on Sephadex G-50. The polysaccharide consists of D-glucuronic acid, D-galacturonic acid, 2-acetamido-2-deoxy-D-glucose, 2-acetamido-2-deoxy-D-galactose and 2-amino-1,3-propanediol residues in 1:1:1:1:1 ratio. From the results of methylation analysis, partial acid hydrolysis and Smith degradation, the structure of the repeating unit of the specific polysaccharide was deduced as: (Formula: see text). The 13C NMR spectra of native, O-deacetylated and carboxyl-reduced polysaccharides, as well as the spectrum of oligosaccharide produced by Smith degradation were interpreted. The 13C NMR data fully confirmed the structure of the polysaccharide repeating unit.     

The targeted recognition of Lactococcus lactis phages to their polysaccharide receptors

Each phage infects a limited number of bacterial strains through highly specific interactions of the receptor‐binding protein (RBP) at the tip of phage tail and the receptor at the bacterial surface. Lactococcus lactis is covered with a thin polysaccharide pellicle (hexasaccharide repeating units), which is used by a subgroup of phages as a receptor. Using L. lactis and phage 1358 as a model, we investigated the interaction between the phage RBP and the pellicle hexasaccharide of the host strain. A core trisaccharide (TriS), derived from the pellicle hexasaccharide repeating unit, was chemically synthesised, and the crystal structure of the RBP/TriS complex was determined. This provided unprecedented structural details of RBP/receptor site‐specific binding. The complete hexasaccharide repeating unit was modelled and found to aptly fit the extended binding site. The specificity observed in in vivo phage adhesion assays could be interpreted in view of the reported structure. Therefore, by combining synthetic carbohydrate chemistry, X‐ray crystallography and phage plaquing assays, we suggest that phage adsorption results from distinct recognition of the RBP towards the core TriS or the remaining residues of the hexasacchride receptor. This study provides a novel insight into the adsorption process of phages targeting saccharides as their receptors.     

Structural characterisation of the exopolysaccharide produced by Streptococcus thermophilus EU20

Streptococcus thermophilus EU20 when grown on skimmed milk secretes a high-molecular-weight exopolysaccharide that is composed of glucose, galactose and rhamnose in a molar ratio of 2:3:2. Using chemical techniques and 1D and 2D-NMR spectroscopy (1H and 13C) the polysaccharide has been shown to possess a heptasaccharide repeating unit having the following structure: [chemical structure: see text]. Treatment of the polysaccharide with mild acid (0.5 M TFA, 100 degrees C for 1 h) liberates two oligosaccharides; the components correspond to the repeating unit and a hexasaccharide equivalent to the repeating unit minus the terminal alpha-L-Rhap.     

Isolation of oligosaccharides from a partial-acid hydrolysate of pneumococcal type 3 polysaccharide for use in conjugate vaccines

A series of well-defined oligosaccharide fragments of the capsular polysaccharide of Streptococcus pneumoniae type 3 has been generated. Partial-acid hydrolysis of the capsular polysaccharide, followed by fractionation of the oligosaccharide mixture by Sepharose Q ion-exchange chromatography yielded fragments containing one to seven [-->3)-beta-D-GlcpA-(1-->4)-beta-D-Glcp-(1-->] repeating units. The isolated fragments were analysed for purity by high-pH anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD) using an IonPac AS11 column, and their structures were verified by 1H NMR spectroscopy and nano-electrospray mass spectrometry. The oligosaccharides can be used to produce neoglycoprotein vaccines with a defined carbohydrate part.     

Structural characterization of the exocellular polysaccharides produced by Streptococcus thermophilus SFi39 and SFi12.

We investigated the structures of the exopolysaccharides (EPSs) produced by Streptococcus thermophilus SFi39 and SFi12. Both polymers were found to have molecular masses of greater than 2 x 10(6) Da. The SFi39 EPS consisted of D-glucose and D-galactose in a molar ratio of 1:1, whereas the SFi12 EPS was composed of D-galactose, L-rhamnose, and D-glucose in a molar ratio of 3:2:1. Methylation analysis of and nuclear magnetic resonance spectra recorded from the native polysaccharide, as well as oligosaccharides released by partial acid hydrolysis, allowed the complete structural determination of the SFi39 EPS, which consists of the following tetrasaccharide repeating unit: [formula: see text] Similar spectra recorded only from the native polysaccharide were sufficient to allow the structural determination of the SFi12 EPS, which consists of the following hexasaccharide repeating unit: [formula: see text] This study shows that the texturizing properties of different S. thermophilus ropy strains are based on the production of EPSs exhibiting chemical similarities but structural differences.     

Structural studies of the exopolysaccharide produced by Lactobacillus rhamnosus strain GG (ATCC 53103)

The structure of the extracellular polysaccharide (EPS) from Lactobacillus rhamnosus strain GG has been investigated. In combination with component analysis, NMR spectroscopy shows that the polysaccharide is composed of hexasaccharide repeating units. Sequential information was obtained by two-dimensional (1)H,(1)H-NOESY, and (1)H,(13)C-HMBC NMR techniques. The structure of the repeating unit of the EPS from Lactobacillus rhamnosus strain GG was determined as: [carbohydrate structure: see text]     

Structural elucidation of the capsular polysaccharide isolated from Kaistella flava

The Gram-negative bacterium under study belongs to the genus Kaistella. It was isolated from a soil sample of the Haian Island in China, and it produces a lipophilic polysaccharide characterised by a branched hexasaccharide repeating unit, counting four 6-deoxy-alpha-l-mannose (Rha) residues, one 2-acetamido-2-deoxy-beta-d-glucose (GlcNAc) and a 2-acetamido-2,6-dideoxy-beta-d-galactose (FucNAc) unit. The structure of the repeating unit, assigned through 2D-NMR spectroscopy, is herein reported for the first time: [carbohydrate structure: see text]     

Structure and serological analysis of the Hafnia alvei 481-L O-specific polysaccharide containing phosphate in the backbone chain

The lipopolysaccharide was extracted from cells of Hafnia alvei 481-L bacterial strain and, after mild acid hydrolysis, the O-specific polysaccharide was isolated and characterised. On the basis of chemical analyses and NMR spectroscopic studies of the polysaccharide and oligosaccharides obtained after Smith degradation, or hydrogen fluoride treatment, it was found that the repeating unit of the O-specific polysaccharide is a phosphorylated hexasaccharide: [see text]. The biological repeating unit of the H. alvei 481-L O-antigen has galactose phosphate at the nonreducing terminus. Serological tests indicate that this strain represents an individual serotype in the H. alvei genus.     

Somatic antigens of Shigella. The structure of the specific polysaccharide of Shigella newcastle (Sh. flexneri type 6) lipopolysaccharide.

The specific polysaccharide was obtained from the lipopolysaccharide of Shigella newcastle by mild acid hydrolysis and further purified by permeation chromatography on Sephadex G-50. It was found to consist of L-rhamnose, 2-acetamido-2-deoxy-D-galactose, D-galacturonic acid residues and O-acetyl groups in the molar ratios of 2:1:1:1. On the basis of 1H and 13C nuclear magnetic resonance spectroscopy, methylation analysis, partial acid hydrolysis, Smith degradation, and chromium trioxide oxidation, the following structure can be assigned to the repeating oligosaccharide unit of the polysaccharide:-4)DGalA(beta 1-3)DGalNAc-(beta 1-2)LAc3Rha(alpha 1-2)LRha(alpha 1-, where GalA = galacturonic acid. GalNAc = N-acetylgalactosamine, Ac3Rha = 3-O-acetylrhamnose. The structural and immunochemical data presented prove that Sh. newcastle lipopolysaccharide belongs to a 'non-classical' type of somatic antigens with acidic O-specific polysaccharide chains.     

Sequence determination of a non-sulfated glycosaminoglycan-like polysaccharide from melanin-free ink of the squid <Emphasis Type="Italic">Ommastrephes bartrami</Emphasis> by negative-ion electrospray tandem mass spectrometry and NMR spectroscopy

A non-sulfated polysaccharide was isolated from the ink sac of squid Ommastrephes bartrami after removal of the melanin granules. The carbohydrate sequence of this polysaccharide was assigned by negative-ion electrospray tandem mass spectrometry with collision-induced dissociation of the oligosaccharide fractions produced by partial acid hydrolysis of the polysaccharide. The structural determination was completed by NMR for assignment of anomeric configuration and confirmation of linkage information and it was unambiguously identified as a glycosaminoglycan-like polysaccharide containing a glucuronic acid-fucose (GlcA-Fuc) disaccharide repeat in the main chain and a N-acetylgalactosamine (GalNAc) branch at Fuc position 3: -[3GlcAbeta1-4(GalNAcalpha1-3)Fucalpha1](n)-. Partial hydrolysis of the polysaccharide to obtain several oligosaccharide fractions with different numbers of the repeating unit assisted the assignment. In the negative-ion tandem mass spectrometric analysis, the unique (0,2)A type fragmentation was important to establish the presence of a 4-linked fucose in the main polysaccharide chain and a GalNAc branch at the Fuc position-3 of the disaccharide repeat.