Laminar-flow-based separations at the microscale

The natural separation maintained by microfluidic flows is employed as the basis of a particle/cell sorting device. This method of separating particulate suspensions exploits the inherent laminar nature of microscale fluid dynamics and incorporates applied fields and image cytometry to enable sorting based upon any visually identifiable difference between colloid-sized cells or particles. This technique may be used to easily isolate, separate, sort, or enrich virtually any suspension of microscale biological or colloidal particles within a microfluidic system. The entire footprint of the device described here is less than 0.01 mm(2), allowing it to be readily incorporated within highly integrated micro total analysis systems (microTAS).     

Particle classification from light scattering with the scanning flow cytometer.

BACKGROUND:The differential light-scattering pattern, an indicatrix, provides the most complete characterization of the optical properties of a particle. Particle classification can be performed on the basis of particle parameters retrieved from the indicatrices. This classification extends the ability of flow cytometry in particle recognition. METHODS:The scanning flow cytometer (SFC) permits an acquisition of traces of light scattering signals, i.e., native SFC traces, from single particles. The acquired native SFC traces are transformed into indicatrices. The performance of the SFC in measurements of indicatrices has been demonstrated for the following particles: lymphocytes, erythrocytes, polystyrene particles, and milk-fat particles. RESULTS:The structure and profile of the indicatrix for each particle type have been found to be unique. Classification of polystyrene particles has been performed on the basis of the map formed by particle refractive index and size. The polystyrene particles were classified using this map into different size categories ranging from 1.4-7 microm, with a size deviation of 0.07 microm. CONCLUSIONS:The method based on analysis of native SFC traces shows better performance in particle classification than the method based on the particle refractive index and size map. The classification performance of the SFC will be useful, for example, for particle sorting and particle identification, and with additional fluorescent measurements may have applications in multiparameter particle-based immunoassay.     

High resolution dual laser flow cytometry.

Flow cytometers based on optical sensing utilize external light sources and fluorescent dyes to measure one or more specific components or properties of individual cells or subcellular particles in liquid suspension. To provide for independent excitation of two dyes used in double staining experiments we have constructed a high resolution flow cytometer that uses two laser beams to provide two wavelengths of excitation. These beams are separated spatially so that cells flow through them sequentially, with a time separation of about 20 musec. Since the dyes are excited sequentially their emission occurs at different times and their emission spectra may overlap without causing any difficulty in analysis. We have developed new light collection optics that permit up to four measurements to be made on each cell. This approach greatly increases the number of dye combinations that can be used in flow cytometry, thus removing a significant limitation of single illumination instruments.     

Experimental and theoretical investigations on the validity of the geometrical optics model for calculating the stability of optical traps.

We have developed a computer program based on the geometrical optics approach proposed by Roosen to calculate the forces on dielectric spheres in focused laser beams. We have explicitly taken into account the polarization of the laser light and thd divergence of the laser beam. The model can be used to evaluate the stability of optical traps in a variety of different optical configurations. Our calculations explain the experimental observation by Ashkin that a stable single-beam optical trap, without the help of the gravitation force, can be obtained with a strongly divergent laser beam. Our calculations also predict a different trap stability in the directions orthogonal and parallel to the polarization direction of the incident light. Different experimental methods were used to test the predictions of the model for the gravity trap. A new method for measuring the radiation force along the beam axis in both the stable and instable regions is presented. Measurements of the radiation force on polystyrene spheres with diameters of 7.5 and 32 microns in a TEM00-mode laser beam showed a good qualitative correlation with the predictions and a slight quantitative difference. The validity of the geometrical approximations involved in the model will be discussed for spheres of different sizes and refractive indices.     

Stiffness Dependent Separation of Cells in a Microfluidic Device

Abnormal cell mechanical stiffness can point to the development of various diseases including cancers and infections. We report a new microfluidic technique for continuous cell separation utilizing variation in cell stiffness. We use a microfluidic channel decorated by periodic diagonal ridges that compress the flowing cells in rapid succession. The compression in combination with secondary flows in the ridged microfluidic channel translates each cell perpendicular to the channel axis in proportion to its stiffness. We demonstrate the physical principle of the cell sorting mechanism and show that our microfluidic approach can be effectively used to separate a variety of cell types which are similar in size but of different stiffnesses, spanning a range from 210 Pa to 23 kPa. Atomic force microscopy is used to directly measure the stiffness of the separated cells and we found that the trajectories in the microchannel correlated to stiffness. We have demonstrated that the current processing throughput is 250 cells per second. This microfluidic separation technique opens new ways for conducting rapid and low-cost cell analysis and disease diagnostics through biophysical markers.     

A proposal for optical diagnostics through the enhancement of diffraction patterns using thin-film interference filters

Coarse clumping of solid materials within diseased biological cells can have a marked influence on the light scattering pattern. Perturbations in refractive index lead to distinct variations in the cytometric signature, especially apparent over wide scattering angles. The large dynamic range of scattering intensities restricts collection of data to narrow angular intervals believed to have the highest potential for medical diagnosis. We propose the use of an interference filter to reduce the dynamic range. Selective attenuation of scattering intensity levels is expected to allow simultaneous data collection over a wide angular interval. The calculated angular transmittance of a commercial shortwave-pass filter of cut-off wavelength 580 nm indicates significant attenuation of scattering peaks below ∼10°, and reasonable peak equalization at higher angles. For the three-dimensional calculation of laser light scattered by cells we use a spectral method code that models cells as spatially varying dielectrics, stationary in time. However, we perform preliminary experimental testing with the interference filter on polystyrene microspheres instead of biological cells. A microfluidic toolkit is used for the manipulation of the microspheres. The paper intends to illustrate the principle of a light scattering detection system incorporating an interference filter for selective attenuation of scattering peaks.     

Optical tweezers based force measurement system for quantitating binding interactions: system design and application for the study of bacterial adhesion

An optical force measurement system for quantitating forces in the pN range between micrometer-sized objects has been developed. The system was based upon optical tweezers in combination with a sensitive position detection system and constructed around an inverted microscope. A trapped particle in the focus of the high numerical aperture microscope-objective behaves like an omnidirectional mechanical spring in response to an external force. The particle's displacement from the equilibrium position is therefore a direct measure of the exerted force. A weak probe laser beam, focused directly below the trapping focus, was used for position detection of the trapped particle (a polystyrene bead). The bead and the condenser focus the light to a distinct spot in the far field, monitored by a position sensitive detector. Various calibration procedures were implemented in order to provide absolute force measurements. The system has been used to measure the binding forces between Escherichia coli bacterial adhesins and galabiose-functionalized beads.     

Fabrication and Operation of a Nano-Optical Conveyor Belt

The technique of using focused laser beams to trap and exert forces on small particles has enabled many pivotal discoveries in the nanoscale biological and physical sciences over the past few decades. The progress made in this field invites further study of even smaller systems and at a larger scale, with tools that could be distributed more easily and made more widely available. Unfortunately, the fundamental laws of diffraction limit the minimum size of the focal spot of a laser beam, which makes particles smaller than a half-wavelength in diameter hard to trap and generally prevents an operator from discriminating between particles which are closer together than one half-wavelength. This precludes the optical manipulation of many closely-spaced nanoparticles and limits the resolution of optical-mechanical systems. Furthermore, manipulation using focused beams requires beam-forming or steering optics, which can be very bulky and expensive. To address these limitations in the system scalability of conventional optical trapping our lab has devised an alternative technique which utilizes near-field optics to move particles across a chip. Instead of focusing laser beams in the far-field, the optical near field of plasmonic resonators produces the necessary local optical intensity enhancement to overcome the restrictions of diffraction and manipulate particles at higher resolution. Closely-spaced resonators produce strong optical traps which can be addressed to mediate the hand-off of particles from one to the next in a conveyor-belt-like fashion. Here, we describe how to design and produce a conveyor belt using a gold surface patterned with plasmonic C-shaped resonators and how to operate it with polarized laser light to achieve super-resolution nanoparticle manipulation and transport. The nano-optical conveyor belt chip can be produced using lithography techniques and easily packaged and distributed.     

Label-free Isolation and Enrichment of Cells Through Contactless Dielectrophoresis

Dielectrophoresis (DEP) is the phenomenon by which polarized particles in a non-uniform electric field undergo translational motion, and can be used to direct the motion of microparticles in a surface marker-independent manner. Traditionally, DEP devices include planar metallic electrodes patterned in the sample channel. This approach can be expensive and requires a specialized cleanroom environment. Recently, a contact-free approach called contactless dielectrophoresis (cDEP) has been developed. This method utilizes the classic principle of DEP while avoiding direct contact between electrodes and sample by patterning fluidic electrodes and a sample channel from a single polydimethylsiloxane (PDMS) substrate, and has application as a rapid microfluidic strategy designed to sort and enrich microparticles. Unique to this method is that the electric field is generated via fluidic electrode channels containing a highly conductive fluid, which are separated from the sample channel by a thin insulating barrier. Because metal electrodes do not directly contact the sample, electrolysis, electrode delamination, and sample contamination are avoided. Additionally, this enables an inexpensive and simple fabrication process.cDEP is thus well-suited for manipulating sensitive biological particles. The dielectrophoretic force acting upon the particles depends not only upon spatial gradients of the electric field generated by customizable design of the device geometry, but the intrinsic biophysical properties of the cell. As such, cDEP is a label-free technique that avoids depending upon surface-expressed molecular biomarkers that may be variably expressed within a population, while still allowing characterization, enrichment, and sorting of bioparticles.Here, we demonstrate the basics of fabrication and experimentation using cDEP. We explain the simple preparation of a cDEP chip using soft lithography techniques. We discuss the experimental procedure for characterizing crossover frequency of a particle or cell, the frequency at which the dielectrophoretic force is zero. Finally, we demonstrate the use of this technique for sorting a mixture of ovarian cancer cells and fluorescing microspheres (beads).     

Integration of microfluidics with a four-channel integrated optical Young interferometer immunosensor

This report describes an optical sensing hybrid system obtained by bonding a microfluidic system to an integrated optical (IO) four-channel Young interferometer (YI) chip. The microfluidic system implemented into a glass plate consists of four microchannels with cross-sectional dimensions of 200 microm x 15 microm. The microfluidic system is structured in such a way that after bonding to the IO chip, each microchannel addresses one sensing window in the four-channel YI sensor. Experimental tests show that the implementation of the microfluidics reduces the response time of the sensor from 100s, as achieved with a bulky cuvette, to 4s. Monitoring the anti-human serum albumine/human serum albumine (alpha-HSA/HSA) immunoreaction demonstrates the feasibility to use the microfluidic sensing system for immunosensing applications. In this case, a better discrimination between the bulk refractive index change and the layer formation can be made, resulting into higher accuracy and offering the prospect of being able to use the kinetics of the immunoreaction. The microfluidic sensing system shows an average phase resolution of 7 x 10(-5) x 2pi for different pairs of channels, which at the given interaction length of 4 mm corresponds to a refractive index resolution of 6 x 10(-8), being equivalent to a protein mass coverage resolution of 20 fg/mm2.     

The optical stretcher: a novel laser tool to micromanipulate cells.

When a dielectric object is placed between two opposed, nonfocused laser beams, the total force acting on the object is zero but the surface forces are additive, thus leading to a stretching of the object along the axis of the beams. Using this principle, we have constructed a device, called an optical stretcher, that can be used to measure the viscoelastic properties of dielectric materials, including biologic materials such as cells, with the sensitivity necessary to distinguish even between different individual cytoskeletal phenotypes. We have successfully used the optical stretcher to deform human erythrocytes and mouse fibroblasts. In the optical stretcher, no focusing is required, thus radiation damage is minimized and the surface forces are not limited by the light power. The magnitude of the deforming forces in the optical stretcher thus bridges the gap between optical tweezers and atomic force microscopy for the study of biologic materials.     

Direct laser trapping of single DNA molecules in the globular state.

A sharply focused laser is able to trap small particles at the laser focal point due to the difference in refractive index of the particles and that of the surrounding medium. This technique, called laser trapping, can be used to manipulate animal or bacterial cells without any contact and has been widely applied in biological research. However, it has been difficult to trap biological macromolecules such as DNA molecules, because these molecules give a low difference in refractive index and cannot overcome Brownian motion. DNA molecules can be transformed to a condensed globular state. This transformation results in a higher refractive index of DNA due to its increased density. We demonstrate in this paper that a single DNA molecule can be optically trapped using a Nd:YAG laser (1064 nm wavelength) upon transformation from the coiled state to the globular state.     

Orientation of Red Blood Cells and Rouleaux Disaggregation in Interference Laser Fields

The effect of interference laser fields on red blood cells (RBCs) was investigated both theoretically and experimentally. The optical trapping and orientation of individual RBC in interference fringes were observed. It was found that RBC rouleaux undergo disaggregation under the action of interference laser fields. To describe the effect of RBC orientation in interference fringes, we used the equation for torque exerted on a discoid dielectric particle in a gradient light field. The experimental results are in agreement with the predictions of the developed theoretical model.     

Alignment and focusing unit for dual-laser excitation in the fluorescence-activated cell sorter

The two laser beams in a dual-laser fluorescence-activated cell sorter FACS-II can be aligned and focused independently on the sample stream with an additional unit, which can be fitted easily on the optical bench of the FACS. The unit consists of two spherical lenses, which have been mounted in separate holders and can be moved in three directions by way of micrometer gauges. The lenses, which have different focal lengths, have been cut off on one side so each laser beam only passes one lens. The setup has been tested using the flow analysis of a suspension of double-stained chicken red blood cells. The histograms of both fluorescence signals showed normal distributions with a coefficient of variation of approximately 6%. After willful interference with the adjustments, the laser beams could be readily readjusted within five minutes.     

Micromanipulation of amyloplasts with optical tweezers in Arabidopsis stems

Intracellular sedimentation of highly dense, starch-filled amyloplasts toward the gravity vector is likely a key initial step for gravity sensing in plants. However, recent live-cell imaging technology revealed that most amyloplasts continuously exhibit dynamic, saltatory movements in the endodermal cells of Arabidopsis stems. These complicated movements led to questions about what type of amyloplast movement triggers gravity sensing. Here we show that a confocal microscope equipped with optical tweezers can be a powerful tool to trap and manipulate amyloplasts noninvasively, while simultaneously observing cellular responses such as vacuolar dynamics in living cells. A near-infrared (λ=1064 nm) laser that was focused into the endodermal cells at 1 mW of laser power attracted and captured amyloplasts at the laser focus. The optical force exerted on the amyloplasts was theoretically estimated to be up to 1 pN. Interestingly, endosomes and trans-Golgi network were trapped at 30 mW but not at 1 mW, which is probably due to lower refractive indices of these organelles than that of the amyloplasts. Because amyloplasts are in close proximity to vacuolar membranes in endodermal cells, their physical interaction could be visualized in real time. The vacuolar membranes drastically stretched and deformed in response to the manipulated movements of amyloplasts by optical tweezers. Our new method provides deep insights into the biophysical properties of plant organelles in vivo and opens a new avenue for studying gravity-sensing mechanisms in plants.     

阵列光镊与微流控芯片技术的结合与应用

在生物医学研究领域中,阵列光镊与微流控芯片的结合已经成为进行细胞操纵、转移以及少量细胞样品分选等方面最有希望的方法之一。光镊技术对样品具有非接触弹性控制、无机械损伤、可无菌操作等优势,以及微流控芯片分析的高效、多功能、微型化、低成本等优势,成为芯片实验室(Lab-on-a-Chip)的重要研究方面。该文概述了阵列光镊技术的形成与研究现状以及微流控芯片技术的发展与应用现状,分析了在不同阵列光镊形成方法下结合微流控芯片可实现的功能与应用,并对其发展趋势进行了展望。     

Refractive index and thickness of the outer layer of particles of dispersed perfluorochemical-based blood substitutes

A calculation of the refractive index of particles of a disperse perfluorochemical-based (PFC-based) blood substitute has been made taking into account particular features of the structure of PFC emulsion particles and the equations earlier obtained by one of the authors in the studies on light interaction with optically inhomogeneous 2- and 3-layer spheres. The possibility of averaging by volume the refractive index of 2-layer emulsion particles has been shown. The refractive index of PFC particles has been experimentally determined using independent optical methods, and the thickness of the particle shell formed by a surfactant has been evaluated.     

Lipid-Induced Organization of a Primary Amphipathic Peptide: A Coupled AFM-Monolayer Study

To better understand the nature of the mechanism involved in the membrane uptake of a vector peptide, the interactions between dioleoylphosphatidylcholine and a primary amphipathic peptide containing a signal peptide associated with a nuclear localization sequence have been studied by isotherms analysis of mixed monolayers spread at the air-water interface. The peptide and the lipid interact through strong hydrophobic interactions with expansion of the mean molecular area that resulted from a lipid-induced modification of the organization of the peptide at the interface. In addition, a phase separation occurs for peptide molar fraction ranging from about 0.08 to 0.4 Atomic force microscopy observations made on transferred monolayers confirm the existence of phase separation and further reveal that mixed lipid-peptide particles are formed, the size and shape of which depend on the peptide molar fraction. At low peptide contents, round-shaped particles are observed and an increase of the peptide amount, simultaneously to the lipidic phase separation, induces morphological changes from bowls to filamentous particles. Fourier transform infrared spectra (FTIR) obtained on transferred monolayers indicate that the peptide adopts a β-like structure for high peptide molar fractions. Such an approach involving complementary methods allows us to conclude that the lipid and the peptide have a nonideal miscibility and form mixed particles which phase separate. Received: 31 July 1998/Revised: 4 November 1998     

Bessel‐beam illumination in dual‐axis confocal microscopy mitigates resolution degradation caused by refractive heterogeneities

One of the main challenges for laser‐scanning microscopy of biological tissues with refractive heterogeneities is the degradation in spatial resolution that occurs as a result of beam steering and distortion. This challenge is particularly significant for dual‐axis confocal (DAC) microscopy, which achieves improved spatial‐filtering and optical‐sectioning performance over traditional confocal microscopy through off‐axis illumination and collection of light with low‐numerical aperture (NA) beams that must intersect precisely at their foci within tissues. DAC microscope image quality is sensitive to positional changes and distortions of these illumination‐ and collection‐beam foci. Previous studies have shown that Bessel beams display improved positional stability and beam quality than Gaussian beams when propagating through tissues with refractive heterogeneities, which suggests that Bessel‐beam illumination may enhance DAC microscopy of such tissues. Here, we utilize both Gaussian and Bessel illumination in a point‐scanned DAC microscope and quantify the resultant degradation in resolution when imaging within heterogeneous optical phantoms and fresh tissues. Results indicate that DAC microscopy with Bessel illumination exhibits reduced resolution degradation from microscopic tissue heterogeneities compared to DAC microscopy with conventional Gaussian illumination.

     

Packing interactions in the eye-lens. Structural analysis, internal symmetry and lattice interactions of bovine gamma IVa-crystallin

gamma-Crystallins are a family of low molecular weight proteins found in high concentration in the densely packed regions of high refractive index in vertebrate lenses. Certain members have the characteristic property of a high critical temperature (tc) for phase separation. We report the three-dimensional structure determination of such a protein, bovine lens gamma IVa-crystallin, which has been refined to give an X-ray R-factor of 0.143. Its high tc contrasts with the low tc gamma II-crystallin, whose structure we have already published. The root mean square difference between the alpha-carbon atoms of these two proteins is 0.70 A and gamma IVa has an internal symmetry even higher than that of gamma II. The presence of a protein that exhibits the phenomenon of phase separation at body temperature renders the lens very susceptible to a transformation from transparent to an opaque state due to irregularities in the refractive index. Protein interactions of gamma IVa-crystallin have implications for the mechanism of cataract formation. Modes of self-association behaviour of gamma IVa-crystallin have been inferred from an analysis of the lattice interactions in the crystalline state, where the protein packing density is similar to that of the intact lens. It appears that the point mutation at position 103 from a serine residue in gamma II to a valine in gamma IVa gives rise to a lattice contact formed by two four-stranded beta-sheets in gamma IVa. A group-specific mutation at position 118 from leucine to phenylalanine induces subtle differences in core packing, leading to a reorganization around residue 103. However, the final phase separation determinant may be a complex combination of many side-chain functions.