MethylQuant: a sensitive method for quantifying methylation of specific cytosines within the genome

Here we present MethylQuant, a novel method that allows accurate quantification of the methylation level of a specific cytosine within a complex genome. This method relies on the well-established treatment of genomic DNA with sodium bisulfite, which converts cytosine into uracil without modifying 5-methyl cytosine. The region of interest is then PCR-amplified and quantification of the methylation status of a specific cytosine is performed by methylation-specific real-time PCR with SYBR Green I using one of the primers whose 3′ end discriminates between the methylation states of this cytosine. The presence of a locked nucleic acid at the 3′ end of the discriminative primer provides the specificity necessary for accurate and sensitive quantification, even when one of the methylation states is present at a level as low as 1% of the overall population. We demonstrate that accurate quantification of the methylation status of specific cytosines can be achieved in biological samples. The method is high-throughput, cost-effective, relatively simple and does not require any specific equipment other than a real-time PCR instrument.     

Reference Materials for Calibration of Analytical Biases in Quantification of DNA Methylation

Most contemporary methods for the quantification of DNA methylation employ bisulfite conversion and PCR amplification. However, many reports have indicated that bisulfite-mediated PCR methodologies can result in inaccurate measurements of DNA methylation owing to amplification biases. To calibrate analytical biases in quantification of gene methylation, especially those that arise during PCR, we utilized reference materials that represent exact bisulfite-converted sequences with 0% and 100% methylation status of specific genes. After determining relative quantities using qPCR, pairs of plasmids were gravimetrically mixed to generate working standards with predefined DNA methylation levels at 10% intervals in terms of mole fractions. The working standards were used as controls to optimize the experimental conditions and also as calibration standards in melting-based and sequencing-based analyses of DNA methylation. Use of the reference materials enabled precise characterization and proper calibration of various biases during PCR and subsequent methylation measurement processes, resulting in accurate measurements.     

Capillary electrophoretic analysis of genomic DNA methylation levels

Changes in DNA methylation have been found in the large majority of tumors. This phenomenon includes both genome-wide hypomethylation and gene- specific hypermethylation. However, the clinical relevance of either mechanism has remained contentious. In order to determine DNA methylation levels from a large number of clinical samples, we have established a method for accurate high-throughput quantification of 5-methylcytosine in genomic DNA. Our protocol requires a small amount (<1 µg) of DNA that is enzymatically hydrolyzed to single nucleotides. Single nucleotides are then derivatized with a fluorescent marker and separated by capillary electrophoresis. After calibration of the method, we have determined cytosine methylation levels from tumor samples of 81 patients that had been diagnosed with chronic lymphocytic leukemia (CLL). These patients showed a high variability in their methylation levels with a general trend towards hypomethylation. Because of its high accuracy and throughput our method will be useful in determining the role of genomic DNA methylation levels in tumorigenesis.     

A mobility shift detection method for DNA methylation analysis using phosphate affinity polyacrylamide gel electrophoresis

We describe a procedure for DNA methylation analysis using the bisulfite-mediated cytosine-to-uracil conversion of a target DNA followed by methylation-specific polymerase chain reaction (MSP) and phosphate affinity polyacrylamide gel electrophoresis (PAGE). The MSP was performed using a 1:1 mixture of 5′-phosphorylated methylation-specific and 5′-OH non-methylation-specific primers. The PAGE using an immobilized phosphate-binding tag molecule (i.e., a polyacrylamide-bound dizinc(II) complex, Zn²⁺-Phos-tag), which selectively captures the 5′-phosphorylated DNA fragment, enabled the mobility shift detection of the methylation-specific product as a slower migration band. Using this novel procedure, we demonstrated the detection of a methylated cytosine base in a pUC19 plasmid.     

Methylation-dependent fragment separation: direct detection of DNA methylation by capillary electrophoresis of PCR products from bisulfite-converted genomic DNA

Fundamental to understanding the role of cytosine (C) methylation in genomic DNA (gDNA) is the need for robust analysis methods to determine the location and degree of this modification. We report a novel method for methylation detection by denaturing capillary electrophoresis (CE) using standard fragment analysis conditions. Bisulfite treatment of gDNA will selectively deaminate C but not 5-methylcytosine (5mC). Amplicons generated from bisulfite-converted gDNA are analyzed immediately after PCR using a 6-carboxy fluorescein (6-FAM) dye-labeled primer. The amplicons from methylated and unmethylated gDNA separate based solely on base composition due to the presence of multiple C versus thymine (T) differences. By direct detection of PCR amplicons following PCR using primers that anneal independent of methylation status, the overall workflow from gDNA sample input to data analysis is relatively simple. Furthermore, the same PCR product is suitable for additional analyses such as direct sequencing, cloning and sequencing, single-base extension, and post-PCR incorporation of a modified dCTP, the latter of which allows resolution of amplicons with as little as a single C/T difference. We show the utility of this novel CE detection assay by analyzing the hypermethylated region of the fragile-X FMR1 locus.     

Direct quantification of polymerase chain reaction fragments using field-amplified sample injection in capillary zone electrophoresis for gene dosage estimation

To assess gene dosages for clinical application, especially for prognostication of cancer, we developed a direct quantification method for polymerase chain reaction products. We report on an application of field amplified sample injection (FASI) to capillary zone electrophoresis which allows the quantification of PCR products without sample preparation. Using an external standard and UV detection for the quantification of DNA, a low coefficient of variation has been obtained. Overall, the described method provides a fast and easy tool for PCR product quantification in clinical laboratories.     

An optimized rapid bisulfite conversion method with high recovery of cell-free DNA

Background

Methylation analysis of cell-free DNA is a encouraging tool for tumor diagnosis, monitoring and prognosis. Sensitivity of methylation analysis is a very important matter due to the tiny amounts of cell-free DNA available in plasma. Most current methods of DNA methylation analysis are based on the difference of bisulfite-mediated deamination of cytosine between cytosine and 5-methylcytosine. However, the recovery of bisulfite-converted DNA based on current methods is very poor for the methylation analysis of cell-free DNA.

Results

We optimized a rapid method for the crucial steps of bisulfite conversion with high recovery of cell-free DNA. A rapid deamination step and alkaline desulfonation was combined with the purification of DNA on a silica column. The conversion efficiency and recovery of bisulfite-treated DNA was investigated by the droplet digital PCR. The optimization of the reaction results in complete cytosine conversion in 30 min at 70 °C and about 65% of recovery of bisulfite-treated cell-free DNA, which is higher than current methods.

Conclusions

The method allows high recovery from low levels of bisulfite-treated cell-free DNA, enhancing the analysis sensitivity of methylation detection from cell-free DNA.

     

Rapid quantitation of methylation differences at specific sites using methylation-sensitive single nucleotide primer extension (Ms-SNuPE).

We have developed a rapid quantitative method (Ms-SNuPE) for assessing methylation differences at specific CpG sites based on bisulfite treatment of DNA followed by single nucleotide primer extension. Genomic DNA was first reacted with sodium bisulfite to convert unmethylated cytosine to uracil while leaving 5-methylcytosine unchanged. Amplification of the desired target sequence was then performed using PCR primers specific for bisulfite-converted DNA and the resulting product isolated and used as a template for methylation analysis at the CpG site(s) of interest. This methylation-sensitive technique has several advantages over existing methods used for detection of methylation changes because small amounts of DNA can be analyzed including microdissected pathology sections and it avoids utilization of restriction enzymes for determining the methylation status at CpG sites.     

The bisulfite genomic sequencing used in the analysis of epigenetic states, a technique in the emerging environmental genotoxicology research

Methylation at position 5 of cytosine in DNA is an important event in epigenetic changes of cells, the methylation being linked to the control of gene functions. The DNA methylation can be analyzed by bisulfite genomic sequencing, and a large body of data have now been accumulated, based on which causation of diseases, for example cancer, and many other manifestations of cellular activities have been discussed intensively. This article gives an extensive account of the chemical aspects of bisulfite modification of cytosine and 5-methylcytosine in DNA. Various factors that affect the action of bisulfite are discussed, and a recent progress from our laboratory is explained. Conventional procedures for the bisulfite treatment consist incubation of single-stranded DNA with sodium bisulfite under acidic conditions. This treatment converts cytosine into uracil, but 5-methylcytosine remains unchanged. Amplification by polymerase chain reaction (PCR) of the bisulfite-treated DNA followed by sequencing can result in revealing the positions of 5-methylcytosine in the gene. We have discovered that the whole procedure can be significantly speeded up by the use of a highly concentrated bisulfite solution, 10 M ammonium bisulfite. Another recent finding is that urea, which has been often added to the reaction mixture with the purpose of facilitating the bisulfite-mediated deamination of cytosine in DNA, may not work as anticipated: we have observed that urea does not show such promoting actions in our treatments of DNA. A laboratory protocol for quantifying bisulfite, suitably simple for routine practice to ensure valid experiments, is described.     

Quantitation of polymerase chain reaction products by capillary electrophoresis using laser fluorescence

In samples where the amount of DNA is limited, the polymerase chain reaction (PCR) can amplify specific regions of the DNA. A quantitative analysis of the PCR product would be desirable to ensure sufficient DNA is available for analysis. In this study, we examine the use of capillary electrophoresis (CE) with laser fluorescence detection for quantitation of PCR products. A coated open tubular capillary was used with a non-gel sieving buffer and a fluorescent intercalating dye to obtain results within 20 minutes. Using an internal standard, peak migration time was below 0.1% relative standard deviation (R.S.D.) with a peak area precision of 3% R.S.D. In comparison to quantitation by hybridization, (i.e., slot blot) and spectrophotometric analysis, capillary electrophoresis shows distinct advantages due to its ability to separate unincorporated primers and PCR byproducts from the targeted PCR product. The results demonstrate that CE can be used to monitor the quality and quantity of the PCR product.     

Determination of genomic 5-hydroxymethyl-2’-deoxycytidine in human DNA by capillary electrophoresis with laser induced fluorescence

Recent studies reported the presence of 5-hydroxymethylcytosine (5 hmC) as an additional modification in mammalian genomic DNA. To date, 5 hmC has been detected only in mouse DNA isolated from embryonic stem cells, some adult tissues and in DNA from human bone marrow. Understanding its biological function will require the development of sensitive analytical methods that allow the detection and quantification of 5-hydroxymethylcytosine along with 5-methylcytosine and cytosine.

Here we report the validation of a fast and sensitive method for the quantification of global 5-hydroxymethyl-2'-deoxycytidine (5 hmdC) in DNA. The method is based on a procedure consisting of fluorescence labeling of deoxyribonucleotides and analysis by capillary electrophoresis with laser-induced fluorescence detection (CE-LIF). A double stranded DNA fragment containing a defined number of 5 hmdC residues was used for peak assignment, to establish separation conditions and to determine the limit of detection (LOD). The method yielded a LOD for 5 hmdC of 0.45 amol, which is equivalent to approximately to one 5 hmdC per 4,000 normal nucleotides (0.025%) using 1 μg of DNA as the matrix.

By applying the calibrated assay to the analysis of various DNAs we show that 5 hmdC is present in human tissue and human cancer cell lines. We demonstrate that by using CE-LIF DNA can be analyzed in one run for both methylation and hydroxymethylation of cytosine with high sensitivity and accuracy.     

A two-step quantitative pathogen detection system based on capillary electrophoresis

Rapid identification of bacterial pathogens is important for patient management and initiation of appropriate antibiotic therapy in the early stages of infection. Among the several techniques, capillary electrophoresis single-strand conformation polymorphism (CE-SSCP) analysis combined with small subunit rRNA gene-specific polymerase chain reaction (PCR) has come into the spotlight owing to its sensitivity, resolution, and reproducibility. Despite the advantages of the method, the design of PCR primers and optimization of multiplex PCR conditions remain to be studied so that as many pathogens as possible can be analyzed in a single run. Here we describe a novel two-step technique involving multiplex PCR pathogen detection by CE-SSCP analysis followed by singleplex PCR pathogen quantification by CE-SSCP. Specific PCR primers were designed for optimal separation of their products by CE-SSCP based on molecular weight. PCR conditions were then optimized for multiplex analysis of the targets. Subsequently, detected pathogens were quantified by PCR with specific primers. Eight clinically important strains were simultaneously identified under the optimized conditions. Each individual pathogen was then quantified at a level of sensitivity of tens of cells per milliliter. In conclusion, the two-step pathogen detection method based on CE-SSCP described here allows for sensitive detection of pathogens by multiplex PCR (first step) and quantification by specific PCR (second step). The results illustrate the potential of the method in clinical applications.     

Rapid analysis of DNA methylation using new restriction enzyme sites created by bisulfite modification.

Bisulfite converts non-methylated cytosine in DNA to uracil leaving 5-methylcytosine unaltered. Here, predicted changes in restriction enzyme sites following reaction of genomic DNA with bisulfite and amplification of the product by the polymerase chain reaction (PCR) were used to assess the methylation of CpG sites. This procedure differs from conventional DNA methylation analysis by methylation-sensitive restriction enzymes because it does not rely on an absence of cleavage to detect methylated sites, the two strands of DNA produce different restriction enzyme sites and may be differentially analyzed, and closely related sequences may be separately analyzed by using specific PCR primers.     

Rapid quantification of global DNA methylation by isocratic cation exchange high-performance liquid chromatography

The DNA of many eukaryotes is methylated at specific cytosine residues in connection with gene regulation. Here we report a method for the quantification of global cytosine methylation based on enzymatic hydrolysis of DNA, dephosphorylation, and subsequent high-performance cation exchange chromatography. Nucleosides are separated in less than 3 min under isocratic conditions on a benzenesulfonic acid-modified silica phase and detected by UV absorption. As little as 1 microg of DNA is sufficient to measure 5-methyldeoxycytosine levels with a typical relative standard deviation of less than 3%. As a proof of concept, the method was applied for analysis of DNA from several Arabidopsis thaliana mutants affected in DNA methylation and from Medicago sativa seedlings treated with the environmental pollutant chromium(VI).     

应用亚硫酸氢盐修饰后PCR联合TA克隆测序对E-cadherin启动子区甲基化水平的检测

E-cadherin是一种细胞粘附因子,通过增强细胞之间的粘附而起到抑制肿瘤转移的作用.Ecadherin基因启动子区的高甲基化是导致其在众多肿瘤细胞中表达下调甚至缺失的主要原因之一.本实验首先抽提SGC-7901细胞(胃腺癌细胞)、A549细胞(肺腺癌细胞)、MCF-7细胞(乳腺癌细胞)等3个肿瘤细胞株的全基因组DNA,然后对抽提的DNA进行亚硫酸氢盐修饰和纯化回收,根据修饰后的DNA序列设计引物并对其进行PCR扩增.然后将PCR扩增产物与pUC-T TA载体连接并转化入感受态大肠杆菌DH5α中进行培养,对筛选出的含有阳性重组子的菌落进行测序.测序结果显示,3个肿瘤细胞株的E-cadherin基因启动子区的CpG岛都呈现了高度的甲基化,亚硫酸氢盐的修饰效率达到了99.2%.综上研究表明,亚硫酸氢盐修饰后PCR(BSP)联合TA克隆测序可以对肿瘤细胞某基因启动子区CpG岛的甲基化水平进行精确量化,研究所使用的3个肿瘤细胞株均可作为研究肿瘤细胞E-cadherin基因甲基化的细胞模型.     

A simple method for the preparation of single-stranded polydeoxynucleotides of desired length.

A method for the preparation of homogeneous, single-stranded polydeoxynucleotides of desired length up to 800 bases is described. The procedure entails 1) generation of double-stranded DNA of desired length by PCR using a pair of primers of which one is biotinylated and the other is either unlabeled or fluorescently labeled, 2) isolation of PCR products by agarose slab gel electrophoresis, 3) recovery of desired product by electroelution, 4) binding of the product to streptavidin-coated magnetic beads and is followed by 5) duplex denaturation and removal of the unbound single strand that is either unlabeled or fluorescently labeled. Final product characteristics were determined by capillary gel electrophoresis with fluorescence detection. Up to microgram quantities of homogeneous single-stranded DNA of a desired length were obtained. These can be used as single-stranded size standards in capillary gel electrophoresis experiments as well as in other techniques requiring such standards.