Co-operation of domain-binding and calcium-binding sites in the activation of gelsolin.

Gelsolin is an abundant calcium dependent actin filament severing and capping protein. In the absence of calcium the molecule is compact but in the presence of calcium, as its six similar domains alter their relative position, a generally more open configuration is adopted to reveal the three actin binding sites. It is generally held that a 'helical-latch' at the C-terminus of gelsolin's domain 6 (G6), binds domain 2 (G2) to keep gelsolin in the calcium-free compact state, and that the crutial calcium binding site(s) reside in the C-terminal half of gelsolin perhaps involving the C-terminal helix itself has to be bound to release this latch. Here we provide evidence for a calcium dependent conformational change within G2 (Kd = approximately 15 micro m). We also report a calcium dependent binding site for the C-terminus (G4-6) within G2 and delimit this further to a specific region formed by residues 203-225 and 159-193. It is known that the activation of gelsolin involves multiple calcium binding events (around 6) the first of which (in G6) may release the latch. We propose that the calcium-dependent conformational change in G2 may be a subsequent step that is necessary for the dissociation of G2 from G4-6, and that this movement occurs in sympathy with calcium induced conformational changes within G6 by the physical coupling of the two calcium binding sites within G2 and G6. Additional calcium binding in other domains then result in the complete opening and activation of the gelsolin molecule.     

Calcium regulation of gelsolin and adseverin: a natural test of the helix latch hypothesis

The gelsolin family of actin filament binding proteins have highly homologous structures. Gelsolin and adseverin, also known as scinderin, are the most similar members of this family, with adseverin lacking a C-terminal helix found in gelsolin. This helix has been postulated to serve as a calcium-sensitive latch, keeping gelsolin inactive. To test this hypothesis, we have analyzed the kinetics of severing by gelsolin, adseverin, and a gelsolin truncate which lacks the C-terminal latch. We find that the relationship between severing rate and calcium ion concentration differs between gelsolin and adseverin, and suggest that calcium controls one rate-limiting step in the activation of adseverin and two in the activation of gelsolin. In contrast, both proteins are activated equally by protons, and have identical severing kinetics at pHs below 6.3. The temperature sensitivity of severing by adseverin and gelsolin is remarkably different, with gelsolin increasing its severing rate 8-fold per 10 degrees C increase in temperature and adseverin increasing its rate only 2-fold per 10 degrees C increase in temperature. Analysis of the gelsolin construct lacking the C-terminal helix demonstrates that this helix is responsible for the regulatory differences between gelsolin and adseverin. These results support the C-terminal latch hypothesis for the calcium ion activation of gelsolin.     

The calcium activation of gelsolin: insights from the 3A structure of the G4-G6/actin complex

Gelsolin participates in the reorganization of the actin cytoskeleton that is required during such phenomena as cell movement, cytokinesis, and apoptosis. It consists of six structurally similar domains, G1-G6, which are arranged at resting intracellular levels of calcium ion so as to obscure the three actin-binding surfaces. Elevation of Ca(2+) concentrations releases latches within the constrained structure and produces large shifts in the relative positioning of the domains, permitting gelsolin to bind to and sever actin filaments. How Ca(2+) is able to activate gelsolin has been a major question concerning the function of this protein. We present the improved structure of the C-terminal half of gelsolin bound to monomeric actin at 3.0 A resolution. Two classes of Ca(2+)-binding site are evident on gelsolin: type 1 sites share coordination of Ca(2+) with actin, while type 2 sites are wholly contained within gelsolin. This structure of the complex reveals the locations of two novel metal ion-binding sites in domains G5 and G6, respectively. We identify both as type 2 sites. The absolute conservation of the type 2 calcium-ligating residues across the six domains of gelsolin suggests that this site exists in each of the domains. In total, gelsolin has the potential to bind eight calcium ions, two type 1 and six type 2. The function of the type 2 sites is to facilitate structural rearrangements within gelsolin as part of the activation and actin-binding and severing processes. We propose the novel type 2 site in G6 to be the critical site that initiates overall activation of gelsolin by releasing the tail latch that locks calcium-free gelsolin in a conformation unable to bind actin.     

Chimeric and truncated gCap39 elucidate the requirements for actin filament severing and end capping by the gelsolin family of proteins.

gCap39 is an actin filament end-capping protein which has a threefold repeated domain structure similar to the N-terminal half of gelsolin. However, unlike gelsolin, gCap39 does not sever actin filaments and dissociates completely from filament ends after calcium removal. We have capitalized on these differences to explore the structural basis for actin filament capping, severing, and their regulation. Using truncated gCap39, generated by limited proteolysis or deletion mutagenesis, we found that actin filament capping requires multiple gCap domains, and almost the entire molecule is necessary for optimal activity. gCap39 domain I, like the equivalent domain in gelsolin, contains an actin monomer binding site. gCap39 domains II-III are, however, different from gelsolin in that they do not bind to the side of actin filaments. Since filament side binding is hypothesized to be the first step in severing, lack of side binding may explain why gCap39 does not sever. This is confirmed directly by swapping gCap39 domains II-III for the side-binding gelsolin domains to generate a chimera which severs actin filaments. The chimera is Ca2+ independent in actin filament severing and capping, although gCap39 domain I itself is regulated by Ca2+.     

Helix Straightening as an Activation Mechanism in the Gelsolin Superfamily of Actin Regulatory Proteins

Villin and gelsolin consist of six homologous domains of the gelsolin/cofilin fold (V1–V6 and G1–G6, respectively). Villin differs from gelsolin in possessing at its C terminus an unrelated seventh domain, the villin headpiece. Here, we present the crystal structure of villin domain V6 in an environment in which intact villin would be inactive, in the absence of bound Ca²⁺ or phosphorylation. The structure of V6 more closely resembles that of the activated form of G6, which contains one bound Ca²⁺, rather than that of the calcium ion-free form of G6 within intact inactive gelsolin. Strikingly apparent is that the long helix in V6 is straight, as found in the activated form of G6, as opposed to the kinked version in inactive gelsolin. Molecular dynamics calculations suggest that the preferable conformation for this helix in the isolated G6 domain is also straight in the absence of Ca²⁺ and other gelsolin domains. However, the G6 helix bends in intact calcium ion-free gelsolin to allow interaction with G2 and G4. We suggest that a similar situation exists in villin. Within the intact protein, a bent V6 helix, when triggered by Ca²⁺, straightens and helps push apart adjacent domains to expose actin-binding sites within the protein. The sixth domain in this superfamily of proteins serves as a keystone that locks together a compact ensemble of domains in an inactive state. Perturbing the keystone initiates reorganization of the structure to reveal previously buried actin-binding sites.Actin is crucial to such processes as cell movement, cell division, and apoptosis, which are regulated by numerous actin-binding proteins, including gelsolin, Arp2/3, and profilin (for review, see Ref. 1). Gelsolin, the most potent actin filament-severing protein known, can bind to, sever, cap, and nucleate actin filaments in a calcium-, pH-, ATP-, and phospholipid-dependent manner (for review, see Ref. 2). Villin, found in microvilli of absorptive epithelium, is a second member of the gelsolin family of actin-binding proteins. In addition to standard gelsolin-type activities, villin is able to bundle actin filaments and is subject to regulation by tyrosine phosphorylation as well as by Ca²⁺ and phosphatidylinositol 4,5-bisphosphate (for review, see Ref. 3). Many comparisons have been made between gelsolin and villin. The two share 50% amino acid sequence identity and show similar proteolytic cleavage patterns (4). Both contain six similarly folded domains, but villin possesses a seventh domain at its C terminus, the headpiece (HP)² domain, which folds into a compact structure that introduces a second F-actin-binding site into the protein. Recent studies indicate that villin uses the HP F-actin-binding sites to achieve bundling (5). In an environment devoid of free Ca²⁺, gelsolin and villin assume inactive conformations. After binding Ca²⁺, both undergo conformational rearrangements that expose their binding sites for F-actin. In villin, this includes revealing the HP actin-binding site through a “hinge mechanism” (6).Biochemical and structural studies have revealed eight Ca²⁺-binding sites of two types in gelsolin (for review, see Ref. 7). Each of the six domains contains a complete and evolutionarily conserved site, termed type 2, whereas G1 and G4 provide partial Ca²⁺ coordination at interfaces with actin through sites termed type 1. Sequential mutagenesis of these sites in villin has identified six functional Ca²⁺-binding sites (8): two major sites, one each of type 1 and type 2, in V1, plus four type 2 sites in V2–V6. The type 1 site in V1 regulates F-actin-capping and F-actin-severing activities, whereas the lower affinity type 2 site in V1 only affects severing (9). The other four sites are involved in stabilizing villin conformation, but they do not directly influence actin-severing activity. NMR studies of a fragment of villin that consists of V6 and the HP domain have implicated V6 residues Asn⁶⁴⁷, Asp⁶⁴⁸, and Glu⁶⁷⁰ in binding Ca²⁺ (10). These experiments also revealed the first 80 residues of V6 to undergo significant conformational change as a result of Ca²⁺ binding.Nanomolar to micromolar concentrations of free Ca²⁺ govern the actin-binding activities of gelsolin. In contrast, micromolar and millimolar concentrations of calcium ions are required for villin to exhibit capping and severing, respectively. However, after tyrosine phosphorylation, villin can sever actin filaments even at nanomolar Ca²⁺ concentrations (11). Furthermore, although the actin-severing ability of the N-terminal half of villin is calcium-dependent, that by the N-terminal half of gelsolin is not. In contrast, the binding of G-actin of the C-terminal half of both villin and gelsolin requires Ca²⁺. Creation of hybrid proteins demonstrated that the domains of villin and gelsolin are not interchangeable (12).Abundant x-ray crystallographic structural information exists for gelsolin, including the calcium ion-free (Ca²⁺-free), inactive structure of the intact protein (13), the activated N- and C-terminal halves, each in a bimolecular complex with actin (7, 14), and the activated C-terminal half on its own (15, 16). Structural data for intact villin are unavailable and are limited to fragment V1 (17), solved using NMR methods, and the HP domain, solved by NMR and x-ray crystallography (18, 19). NMR experiments also indicate that HP is connected to V6 by a 40-residue disordered linker. As a result, HP has been proposed to bind actin independently of the remainder of the protein (10).In this report, we present the structure of Ca²⁺-free, isolated villin V6, which exhibits a typical gelsolin domain fold. The long helix in V6 in this structure is straight, unlike the corresponding helix in G6 of intact Ca²⁺-free gelsolin, which is bent, and only straightens on calcium activation of the intact protein. Hence, V6 appears to be in an active conformation in the absence of Ca²⁺. Molecular dynamics simulations indicate that the preferred state of the long helix is also straight for isolated G6 in the absence of Ca²⁺. Furthermore, they suggest a bistable mechanism of helix conformational change regulated by the presence of the remaining domains, by calcium ions, and by other interactants. We therefore propose a mechanism for the gelsolin family proteins whereby Ca²⁺ triggers the straightening of the domain 6 helix in the native conformation of the inactive proteins to propagate more widespread conformational changes.     

Ca2+ regulation of gelsolin by its C-terminal tail

Gelsolin is activated by Ca(2+) to sever actin filaments. Ca(2+) regulation is conferred on the N-terminal half by the C-terminal half. This paper seeks to understand how Ca(2+) regulates gelsolin by testing the "tail helix latch hypothesis," which is based on the structural data showing that gelsolin has a C-terminal tail helix that contacts the N-terminal half in the absence of Ca(2+). Ca(2+) activation of gelsolin at 37 degrees C occurs in three steps, with apparent K(d) for Ca(2+) of 0.1, 0.3, and 6.4 x 10(-6) m. Tail helix truncation decreases the apparent Ca(2+) requirement for severing to 10(-7) m and eliminates the conformational change observed at 10(-6) m Ca(2+). The large decrease in Ca(2+) requirement for severing is not due to a change in Ca(2+) binding nor to Ca(2+)-independent activation of the C-terminal half per se. Thus, the tail helix latch is primarily responsible for transmitting micromolar Ca(2+) information from the gelsolin C-terminal half to the N-terminal half. Occupation of submicromolar Ca(2+)-binding sites primes gelsolin for severing, but gelsolin cannot sever because the tail latch is still engaged. Unlatching the tail helix by 10(-6) m Ca(2+) releases the final constraint to initiate the severing cascade.     

A CapG gain-of-function mutant reveals critical structural and functional determinants for actin filament severing

CapG is the only member of the gelsolin family unable to sever actin filaments. Changing amino acids 84-91 (severing domain) and 124-137 (WH2-containing segment) simultaneously to the sequences of gelsolin results in a mutant, CapG-sev, capable of severing actin filaments. The gain of severing function does not alter actin filament capping, but is accompanied by a higher affinity for monomeric actin, and the capacity to bind and sequester two actin monomers. Analysis of CapG-sev crystal structure suggests a more loosely folded inactive conformation than gelsolin, with a shorter S1-S2 latch. Calcium binding to S1 opens this latch and S1 becomes separated from a closely interfaced S2-S3 complex by an extended arm consisting of amino acids 118-137. Modeling with F-actin predicts that the length of this WH2-containing arm is critical for severing function, and the addition of a single amino acid (alanine or histidine) eliminates CapG-sev severing activity, confirming this prediction. We conclude that efficient severing utilizes two actin monomer-binding sites, and that the length of the WH2-containing segment is a critical functional determinant for severing.     

Domain 2 of gelsolin binds directly to tropomyosin

Gelsolin is an actin filament severing protein composed of six similar structured domains that differ with respect to actin, calcium and polyphospho-inositide binding. Previous work has established that gelsolin binds tropomyosin [Koepf, E.K. and Burtnick, L.D. (1992) FEBS Lett. 309, 56-58]. We have produced various specific gelsolin domains in Escherichia coli in order to establish which of the six domains binds tropomyosin. Gelsolin domains 1-3 (G1-3), G1-2 and G2 all bind tropomyosin in a pH and calcium insensitive manner whereas binding of G4-6 to tropomyosin was barely detectable under the conditions tested. We conclude that gelsolin binds tropomyosin via domain 2 (G2).     

The structure of MSK1 reveals a novel autoinhibitory conformation for a dual kinase protein

Mitogen and stress-activated kinase-1 (MSK1) is a serine/threonine protein kinase that is activated by either p38 or p42ERK MAPKs in response to stress or mitogenic extracellular stimuli. MSK1 belongs to a family of protein kinases that contain two distinct kinase domains in one polypeptide chain. We report the 1.8 A crystal structure of the N-terminal kinase domain of MSK1. The crystal structure reveals a unique inactive conformation with the ATP binding site blocked by the nucleotide binding loop. This inactive conformation is stabilized by the formation of a new three-stranded beta sheet on the N lobe of the kinase domain. The three beta strands come from residues at the N terminus of the kinase domain, what would be the alphaB helix in the active conformation, and the activation loop. The new three-stranded beta sheet occupies a position equivalent to the N terminus of the alphaC helix in active protein kinases.     

Steered molecular dynamics simulations on the "tail helix latch" hypothesis in the gelsolin activation process

The molecular basis of the "tail helix latch" hypothesis in the gelsolin activation process has been studied by using the steered molecular dynamics simulations. In the present nanosecond scale simulations, the tail helix of gelsolin was pulled away from the S2 binding surface, and the required forces were calculated, from which the properties of binding between the tail helix and S2 domain and their dynamic unbinding processes were obtained. The force profile provides a detailed rupture mechanism that includes six major unbinding steps. In particular, the hydrogen bonds formed between Arg-207 and Asp-744 and between Arg-221 and Leu-753 are of the most important interaction pairs. The two hydrogen bond "clamps" stabilize the complex. The subsequent simulation on Arg-207-Ala (R207A) mutation of gelsolin indicated that this mutation facilitates the unbinding of the tail helix and that the contribution of the hydrogen bond between Arg-207 and Asp-744 to the binding is more than 50%, which offers a new clue for further mutagenesis study on the activation mechanism of gelsolin. Surrounding water molecules enhance the stability of the tail helix and facilitate the rupture process. Additionally, temperature also has a significant effect on the conformation of the arginine and arginine-related interactions, which revealed the molecular basis of the temperature dependence in gelsolin activation.     

Calcium-induced conformational changes in the C-terminal half of gelsolin stabilize its interaction with the actin monomer

The basic mechanism for the nucleating effect of gelsolin on actin polymerization is the formation of a complex of gelsolin with two actin monomers. Probably due to changes in the C-terminal part of gelsolin, a stable ternary complex is only formed at [Ca(2+)] >10(-5) M [Khaitlina, S., and Hinssen, H. (2002) FEBS Lett. 521, 14-18]. Therefore, we have studied the binding of actin monomer to the isolated C-terminal half of gelsolin (segments 4-6) over a wide range of calcium ion concentrations to correlate the conformational changes to the complex formation. With increasing [Ca(2+)], the apparent size of the C-terminal half as determined by gel filtration was reduced, indicating a transition into a more compact conformation. Moreover, Ca(2+) inhibited the cleavage by trypsin at Lys 634 within the loop connecting segments 5 and 6. Though the inhibitory effect was observed already at [Ca(2+)] of 10(-7) M, it was enhanced with increasing [Ca(2+)], attaining saturation only at >10(-4) M Ca(2+). This indicates that the initial conformational changes are followed by additional molecular transitions in the range of 10(-5)-10(-4) M [Ca(2+)]. Consistently, preformed complexes of actin with the C-terminal part of gelsolin became unstable upon lowering the calcium ion concentrations. These data provide experimental support for the role of the type 2 Ca-binding sites in gelsolin segment 5 proposed by structural studies [Choe et al. (2002) J. Mol. Biol. 324, 691]. We assume that the observed structural transitions contribute to the stable binding of the second actin monomer in the ternary gelsolin-actin complex.     

Identification of a polyphosphoinositide-modulated domain in gelsolin which binds to the sides of actin filaments

Gelsolin is a Ca2+- and polyphosphoinositide-modulated actin-binding protein which severs actin filaments, nucleates actin assembly, and caps the "barbed" end of actin filaments. Proteolytic cleavage analysis of human plasma gelsolin has shown that the NH2-terminal half of the molecule severs actin filaments almost as effectively as native gelsolin in a Ca2+-insensitive but polyphosphoinositide-inhibited manner. Further proteolysis of the NH2-terminal half generates two unique fragments (CT14N and CT28N), which have minimal severing activity. Under physiological salt conditions, CT14N binds monomeric actin coupled to Sepharose but CT28N does not. In this paper, we show that CT28N binds stoichiometrically and with high affinity to actin subunits in filaments, suggesting that it preferentially recognizes the conformation of polymerized actin. Analysis of the binding data shows that actin filaments have one class of CT28N binding sites with Kd = 2.0 X 10(-7) M, which saturates at a CT28N/actin subunit ratio of 0.8. Binding of CT28N to actin filaments is inhibited by phosphatidylinositol 4,5-bisphosphate micelles. In contrast, neither CT14N nor another actin-binding domain located in the COOH-terminal half of gelsolin form stable stoichiometric complexes with actin along the filaments, and their binding to actin monomers is not inhibited by PIP2. Based on these observations, we propose that CT28N is the polyphosphoinositide-regulated actin-binding domain which allows gelsolin to bind to actin subunits within a filament before serving.     

Calcium-sensitive activity and conformation of Caenorhabditis elegans gelsolin-like protein 1 are altered by mutations in the first gelsolin-like domain

The gelsolin family of actin regulatory proteins is activated by Ca(2+) to sever and cap actin filaments. Gelsolin has six homologous gelsolin-like domains (G1-G6), and Ca(2+)-dependent conformational changes regulate its accessibility to actin. Caenorhabditis elegans gelsolin-like protein-1 (GSNL-1) has only four gelsolin-like domains (G1-G4) and still exhibits Ca(2+)-dependent actin filament-severing and -capping activities. We found that acidic residues (Asp-83 and Asp-84) in G1 of GSNL-1 are important for its Ca(2+) activation. These residues are conserved in GSNL-1 and gelsolin and previously implicated in actin-severing activity of the gelsolin family. We found that alanine mutations at Asp-83 and Asp-84 (D83A/D84A mutation) did not disrupt actin-severing or -capping activity. Instead, the mutants exhibited altered Ca(2+) sensitivity when compared with wild-type GSNL-1. The D83A/D84A mutation enhanced Ca(2+) sensitivity for actin severing and capping and its susceptibility to proteolytic digestion, suggesting a conformational change. Single mutations caused minimal changes in its activity, whereas Asp-83 and Asp-84 were required to stabilize Ca(2+)-free and Ca(2+)-bound conformations, respectively. On the other hand, the D83A/D84A mutation suppressed sensitivity of GSNL-1 to phosphatidylinositol 4,5-bisphosphate inhibition. The structure of an inactive form of gelsolin shows that the equivalent acidic residues are in close contact with G3, which may maintain an inactive conformation of the gelsolin family.     

Evidence for functional homology in the F-actin binding domains of gelsolin and alpha-actinin: implications for the requirements of severing and capping

The F-actin binding domains of gelsolin and alpha-actinin compete for the same site on actin filaments with similar binding affinities. Both contain tandem repeats of approximately 125 amino acids, the first of which is shown to contain the actin-binding site. We have replaced the F-actin binding domain in the NH2-terminal half of gelsolin by that of alpha-actinin. The hybrid severs filaments almost as efficiently as does gelsolin or its NH2-terminal half, but unlike the latter, requires calcium ions. The hybrid binds two actin monomers and caps the barbed ends of filaments in the presence or absence of calcium. The cap produced by the hybrid binds with lower affinity than that of gelsolin and is not stable: It dissociates from filament ends with a half life of approximately 15 min. Although there is no extended sequence homology between these two different F-actin binding domains, our experiments show that they are functionally equivalent and provide new insights into the mechanism of microfilament severing.     

Identification of a polyphosphoinositide-binding sequence in an actin monomer-binding domain of gelsolin.

Gelsolin is an actin filament-severing and -capping protein that has profound effects on actin filament organization and assembly. It is activated by Ca2+ and inhibited by polyphosphoinositides (PPI). We have previously shown that PPI inhibit actin filament severing by the amino-terminal half of gelsolin and hypothesized that this is mediated through inhibition of actin filament side binding (by domains II-III of gelsolin), a requisite first step in severing. In this paper, we report that the subsequent step in severing, which is mediated by an actin monomer binding site located in domain I of gelsolin, is also regulated by PPI. We used deletional mutagenesis and a synthetic peptide to locate the sequence required for high affinity PPI binding in domain I. Our results show that the PPI-binding sequence has a basic charge distribution that is also present in the PPI-regulated actin filament side binding domain, and the two gelsolin PPI-binding sites have similar PPI-binding affinities. In addition, a similar motif is present in several other PPI-binding proteins, including a highly conserved region in the phospholipase C family. We propose that the sequences identified in gelsolin may represent a consensus for PPI binding in a variety of proteins.     

Expression of human plasma gelsolin in Escherichia coli and dissection of actin binding sites by segmental deletion mutagenesis

Human plasma gelsolin has been expressed in high yield and soluble form in Escherichia coli. The protein has nucleating and severing activities identical to those of plasma gelsolin and is fully calcium sensitive in its interactions with monomeric actin. A number of deletion mutants have been expressed to explore the function of the three actin binding sites. Their design is based on the sixfold segmental repeat in the protein sequence. (These sites are located in segment 1, segments 2-3, and segments 4-6). Two mutants, S1-3 and S4-6, are equivalent to the NH2- and COOH-terminal halves of the molecule obtained by limited proteolysis. S1-3 binds two actin monomers in the presence or absence of calcium, it severs and caps filaments but does not nucleate polymerization. S4-6 binds a single actin monomer but only in calcium. These observations confirm and extend current knowledge on the properties of the two halves of gelsolin. Two novel constructs have also been studied that provide a different pairwise juxtaposition of the three sites. S2-6, which lacks the high affinity site of segment 1 (equivalent to the 14,000-Mr proteolytic fragment) and S1,4-6, which lacks segments 2-3 (the actin filament binding domain previously identified using the 28,000-Mr proteolytic fragment). S2-6 binds two actin monomers in calcium and nucleates polymerization; it associates laterally with filaments in the presence or absence of calcium and has a weak calcium-dependent fragmenting activity. S1,4-6 also binds two actin monomers in calcium and one in EGTA, has weak severing activity but does not nucleate polymerization. A model is presented for the involvement of the three binding sites in the various activities of gelsolin.     

Role of the basic C-terminal half of caldesmon in its regulation of F-actin: comparison between caldesmon and calponin

We previously reported that caldesmon (CaD), together with tropomyosin (TM), effectively protects actin filaments from gelsolin, an actin-severing protein. To elucidate the structure/function relationship of CaD, we dissected the functional domain of CaD required for the protection. The basic C-terminal half of rat nonmuscle CaD (D3) inhibits gelsolin activity to the same degree as intact CaD, although a smaller C-terminal region of D3 does not. This smaller C-terminal region contains the minimum regulatory domain responsible for the inhibition of actomyosin ATPase, and for the binding to actin, calmodulin and TM. These results suggest that the domain responsible for the inhibition of gelsolin activity lies outside the minimum regulatory domain, and that the positive charge possessed by the C-terminal half of CaD is important for its interaction with actin. Moreover, while the D3 fragment promotes the aggregation of F-actin into bundles as reported previously, this bundle formation is inhibited by the acidic N-terminal half of CaD, as well as by poly-l-glutamate. It seems likely that the acidic N-terminal half of CaD neutralizes the superfluous basic feature of the C-terminal half. A comparison between D3 and calponin, another actin-binding protein that is also basic and has similar actin-regulatory activities, is also discussed.     

Amino acid sequence of myosin essential light chain from the scallop Aquipecten irradians

The amino acid sequence of the scallop myosin essential light chain (SELC) was determined from analysis of the intact, S-carboxymethylated protein and peptides produced by cleavage at its four methionine residues by cyanogen bromide digestion and at its six arginine residues by citraconylation and tryptic digestion. SELC contains 156 amino acid residues, including three cysteines, four tyrosines, one tryptophan, two histidines, and an unblocked amino-terminal proline. The protein has a calculated Mr of 17,616. SELC is an acidic protein, with a net charge of 18- at physiological pH. Comparative analysis reveals four homologous domains (I-IV), which arose by reduplication of a gene for a small, ancestral calcium binding protein. Each domain has a helix-loop-helix structure, with all the ligands for calcium binding located within a 12-residue segment that spans the loop and the first turn of the following helix. Potential calcium binding sequences were found in the ancestral sites III (residues 94-105) and IV (residues 132-143). Mutations in critical positions in domains I and II seem to preclude the possibility of calcium binding in the amino-terminal half of SELC. An unexpected third potential calcium binding segment (at residues 119-130, predicted to be in helical conformation) was found in domain IV. A reactive thiol group (Cys-78) that is involved in binding of regulatory light chains was tentatively located in an extended "linker region", which connects the two halves of the molecule.     

Identification of a functional switch for actin severing by cytoskeletal proteins

Actin severing is vital for the organization of the actin cytoskeleton during cell motility. Severing of F-actin by the homologous proteins villin and gelsolin requires unphysiologically high calcium concentrations (20-200 microM). Here we demonstrate that high calcium releases an autoinhibited conformation in villin that is maintained by two low affinity calcium binding sites (aspartic acids 467 and 715) that interact with a cluster of basic residues in the S2 domain of villin. Mutation of either of these sites as well as tyrosine phosphorylation alters the conformation of villin resulting in a protein that can sever actin in nanomolar calcium. These results suggest that tyrosine phosphorylation rather than high calcium may be the mechanism by which villin and other related proteins sever actin in vivo.     

Calcium ion exchange in crystalline gelsolin

Gelsolin is a calcium and pH-sensitive modulator of actin filament length. Here, we use X-ray crystallography to examine the extraction and exchange of calcium ions from their binding sites in different crystalline forms of the activated N and C-terminal halves of gelsolin, G1-G3 and G4-G6, respectively. We demonstrate that the combination of calcium and low pH activating conditions do not induce conformational changes in G4-G6 beyond those elicited by calcium alone. EGTA is able to remove calcium ions bound to the type I and type II metal ion-binding sites in G4-G6. Constrained by crystal contacts and stabilized by interdomain interaction surfaces, the gross structure of calcium-depleted G4-G6 remains that of the activated form. However, high-resolution details of changes in the ion-binding sites may represent the initial steps toward restoration of the arrangement of domains found in the calcium-free inactive form of gelsolin in solution. Furthermore, bathing crystals with the trivalent calcium ion mimic, Tb3+, results in anomalous scattering data that permit unequivocal localization of terbium ions in each of the proposed type I and type II ion-binding sites of both halves of gelsolin. In contrast to predictions based on solution studies, we find that no calcium ion is immune to exchange.