Control of Listeria spp. by Competitive-Exclusion Bacteria in Floor Drains of a Poultry Processing Plant

In previous studies workers determined that two lactic acid bacterium isolates, Lactococcus lactis subsp. lactis C-1-92 and Enterococcus durans 152 (competitive-exclusion bacteria [CE]), which were originally obtained from biofilms in floor drains, are bactericidal to Listeria monocytogenes or inhibit the growth of L. monocytogenes both in vitro and in biofilms at 4 to 37°C. We evaluated the efficacy of these isolates for reducing Listeria spp. contamination of floor drains of a plant in which fresh poultry is processed. Baseline assays revealed that the mean numbers of Listeria sp. cells in floor drains sampled on six different dates (at approximately biweekly intervals) were 7.5 log₁₀ CFU/100 cm² for drain 8, 4.9 log₁₀ CFU/100 cm² for drain 3, 4.4 log₁₀ CFU/100 cm² for drain 2, 4.1 log₁₀ CFU/100 cm² for drain 4, 3.7 log₁₀ CFU/100 cm² for drain 1, and 3.6 log₁₀ CFU/100 cm² for drain 6. The drains were then treated with 10⁷ CE/ml in an enzyme-foam-based cleaning agent four times in 1 week and twice a week for the following 3 weeks. In samples collected 1 week after CE treatments were applied Listeria sp. cells were not detectable (samples were negative as determined by selective enrichment culture) for drains 4 and 6 (reductions of 4.1 and 3.6 log₁₀ CFU/100 cm², respectively), and the mean numbers of Listeria sp. cells were 3.7 log₁₀ CFU/100 cm² for drain 8 (a reduction of 3.8 log₁₀ CFU/100 cm²), <1.7 log₁₀ CFU/100 cm² for drain 1 (detectable only by selective enrichment culture; a reduction of 3.3 log₁₀ CFU/100 cm²), and 2.6 log₁₀ CFU/100 cm² for drain 3 (a reduction of 2.3 log₁₀ CFU/100 cm²). However, the aerobic plate counts for samples collected from floor drains before, during, and after CE treatment remained approximately the same. The results indicate that application of the two CE can greatly reduce the number of Listeria sp. cells in floor drains at 3 to 26°C in a facility in which fresh poultry is processed.     

Effect of different salinities of a dynamic water system on biofilm formation

AISI-1020 carbon steel coupons were fixed onto a water circulation loop in order to study the effect of varying NaCl concentrations on formation of biofilms by natural populations of microorganisms. Overall, we observed a reduction in the number of bacteria attached to the metal surfaces as NaCl levels increased. At 12.85 and 80 g/l NaCl, the respective bacterial counts were: 1.7×10⁹ CFU/cm² and 7.5×10² CFU/cm² for aerobic species; 1.3×10⁴ CFU/cm² and 2.1×10 CFU/cm² for anaerobic species; and 1.8×10³ CFU/cm² and 4.6×10 CFU/cm² for sulfate-reducing species. However, the opposite trend was observed for the numbers of iron-reducing bacteria: 4.1×10⁶ CFU/cm² at 12.85 g/l NaCl and 7.5 10⁸ CFU/cm² at 80 g/l NaCl, respectively. Fungal counts remained constant throughout the experimental period. The salt concentration at which the maximum corrosion rate was observed was 35 g/l. In view of the marked loss of metal mass recorded at this salinity, AISI-1020 carbon steel proved to belong to the group of alloys less resistant to corrosion. Journal of Industrial Microbiology & Biotechnology (2000) 25, 45–48. Received 07 December 1999/ Accepted in revised form 25 April 2000     

Environmental pH modulates biofilm formation and matrix composition in Candida albicans and Candida glabrata

Abstract

Candida species are fungal opportunistic pathogens capable of colonizing and infecting various human anatomical sites, where they have to adapt to distinct niche-specific pH conditions. The aim of this study was to analyse the features of Candida albicans and Candida glabrata biofilms developed under neutral and vaginal acidic (pH 4) conditions. C. albicans produced thicker and more filamentous biofilms under neutral than under acidic conditions. On the other hand, the formation of biofilms by C. glabrata was potentiated by the acidic conditions suggesting the high adaptability of this species to the vaginal environment. In general, both species developed biofilms containing higher amounts of matrix components (protein and carbohydrate) under neutral than acidic conditions, although the opposite result was found for one C. glabrata strain. Overall, this study contributes to a better understanding of the modulation of C. albicans and C. glabrata virulence by specific pH conditions.     

Role of Neurotoxin Associated Proteins in the Low pH Induced Structural Changes in the Botulinum Neurotoxin Complex

Botulinum Neurotoxin (BoNT) produced by the bacterium Clostridium botulinum as a complex with NAPs causes botulism. It has been known that the NAPs protect the toxin from both extremes of pHs and proteases of the GI tract. In an attempt to emulate the physiological conditions encountered by the toxin, we examined BoNT/A, BoNT/A complex, and NAPs under different pH conditions and monitored their structural characteristics by far-UV CD and thermal denaturation analysis. BoNT/A complex showed the maximum CD signal with a mean residue weight ellipticity of ?1.8 × 10⁵° cm²/dmol at 222 nm at both acidic and neutral pHs. Thermal denaturation analysis revealed NAPs to be the most stable amongst the three protein samples examined. Interestingly and quite uniquely, at pH 2.5, there was an increase in CD signal for BoNT complex as a function of temperature, which correlated with the NAPs profile, indicating a shielding effect of NAPs on BoNT complex at low pH. Calculation of the weighted mean of the ellipticities at the T_m for thermal unfolding of toxin and NAPs at neutral and acidic pHs showed variation with that of BoNT complex, suggesting structural reorganization in BoNT complex upon the association of NAPs and BoNT. In conclusion, this study reveals the structural behavior of BoNT complex and NAPs with pH changes substantially, which could be quite relevant for BoNT survival under extreme pH conditions in vivo.     

The free amino acid tyrosine enhances the chlorinating activity of human myeloperoxidase

A key function of neutrophil myeloperoxidase (MPO) is the synthesis of hypochlorous acid (HOCl), a potent oxidizing agent that plays a cytotoxic role against invading bacteria and viruses at inflammatory sites and in phagosomes. MPO displayed a chlorinating activity preferably at acidic pH but at neutral pH MPO catalyzes mainly reactions of the peroxidase cycle. In the present work effects of tyrosine on the chlorinating activity of MPO were studied. At pH 7.4 we detected an increased HOCl production in the presence of tyrosine not only by the MPO-H₂O₂-Cl^- system but also in suspensions of zymosan-activated neutrophils. An excess of H₂O₂ is known to cause an accumulation of compound II of MPO blocking the generation of HOCl at neutral pH. As evidenced by spectral changes, tyrosine-induced activation of MPO to synthesize HOCl was due to the ability of tyrosine to reduce compound II back to the native state, thus accelerating the enzyme turnover. MPO-induced oxidation of tyrosine is relevant to what can be in vivo; we detected MPO-catalyzed formation of dityrosine in the presence of plasma under experimental conditions when tyrosine concentration was about three magnitudes of order less than the Cl⁻ concentration. At acidic pH formation of compound II was impaired in the presence of chloride and dityrosine couldn't be detected in plasma. In conclusion, the ability of tyrosine to increase the chlorinating activity of MPO at neutral pH and enhanced values of H₂O₂ may be very effective for the specific enhancement of HOCl production under acute inflammation.     

Nitrification in a Biofilm at Low pH Values: Role of In Situ Microenvironments and Acid Tolerance

The sensitivity of nitrifying bacteria to acidic conditions is a well-known phenomenon and generally attributed to the lack and/or toxicity of substrates (NH₃ and HNO₂) with decreasing pHs. In contrast, we observed strong nitrification at a pH around 4 in biofilms grown on chalk particles and investigated the following hypotheses: the presence of less acidic microenvironments and/or the existence of acid-tolerant nitrifiers. Microelectrode measurements (in situ and under various experimental conditions) showed no evidence of a neutral microenvironment, either within the highly active biofilm colonizing the chalk surface or within a control biofilm grown on a nonbuffering (i.e., sintered glass) surface under acidic pH. A 16S rRNA approach (clone libraries and fluorescence in situ hybridizations) did not reveal uncommon nitrifying (potentially acid-tolerant) strains. Instead, we found a strongly acidic microenvironment, evidence for a clear adaptation to the low pH in situ, and the presence of nitrifying populations related to subgroups with low K_ms for ammonia (Nitrosopira spp., Nitrosomonas oligotropha, and Nitrospira spp.). Acid-consuming (chalk dissolution) and acid-producing (ammonia oxidation) processes are equilibrated on a low-pH steady state that is controlled by mass transfer limitation through the biofilm. Strong affinity to ammonia and possibly the expression of additional functions, e.g., ammonium transporters, are adaptations that allow nitrifiers to cope with acidic conditions in biofilms and other habitats.     

Anoxybacillus and Geobacillus biofilms in the dairy industry: effects of surface material,incubation temperature and milk type

Abstract

Anoxybacillus (A. flavithermus, A. kamchatkensis subsp. asachharedens, A. caldiproteolyticus and A. tepidamans) and Geobacillus (two strains of G. thermodenitrificans, G. thermoglucosidans and G. vulcanii) isolates and reference strains in whole milk were evaluated for their biofilm production on six different abiotic surfaces. G. thermodenitrificans DSM 465^T had the highest cell counts (>4 log₁₀ CFU cm^?2) on glass and stainless steel (SS) at 55 and 65?°C, respectively. G. thermodenitrificans D195 had the highest counts on SS at 55?°C (>5 log₁₀ CFU cm^?2) and polyvinyl chloride (PVC) at 65?°C (>4 log₁₀ CFU cm^?2), indicating the existence of strain variation. The ideal surfaces for all strains were SS and glass at 55?°C, but their preferences were polystyrene and SS at 65?°C. Moreover, Anoxybacillus members were more prone to form biofilms in skim milk than in semi-skim and whole milk, whereas the results were the opposite for Geobacillus. Both the attachment and sporulation of Geobacillus in whole milk was higher than in semi-skim or skim milk. This study proposes that the surface material, temperature and milk type had a cumulative effect on biofilm formation.     

Biofilm Formation by Cryptococcus neoformans Under Distinct Environmental Conditions

Cryptococcus neoformans is an opportunistic fungal pathogen with a propensity to infect the central nervous system of immune compromised individuals causing life-threatening meningoencephalitis. Cryptococcal biofilms have been described as a protective niche against microbial predators in nature and shown to enhance resistance against antifungal agents and specific mediators of host immune responses. Based on the potential importance of cryptococcal biofilms to its survival in the human host and in nature, these studies were designed to investigate those factors that mediate biofilm formation by C. neoformans. We observed that C. neoformans preferentially grew as planktonic cells when cultured under specific conditions designed to mimic growth within host tissues (37°C, neutral pH, and ~5% CO₂) or phagocytes (37°C, acidic pH, and ~5% CO₂) and as biofilms when cultured under conditions such as those encountered in the external environment (25–37°C, neutral pH, and ambient CO₂). Altogether, our studies suggest that conditions similar to those observed in its natural habitat may be conducive to biofilm formation by C. neoformans.     

Bacteriophage-Mediated Dispersal of Campylobacter jejuni Biofilms

Bacteria in their natural environments frequently exist as mixed surface-associated communities, protected by extracellular material, termed biofilms. Biofilms formed by the human pathogen Campylobacter jejuni may arise in the gastrointestinal tract of animals but also in water pipes and other industrial situations, leading to their possible transmission into the human food chain either directly or via farm animals. Bacteriophages are natural predators of bacteria that usually kill their prey by cell lysis and have potential application for the biocontrol and dispersal of target bacteria in biofilms. The effects of virulent Campylobacter specific-bacteriophages CP8 and CP30 on C. jejuni biofilms formed on glass by strains NCTC 11168 and PT14 at 37°C under microaerobic conditions were investigated. Independent bacteriophage treatments (n ≥ 3) led to 1 to 3 log₁₀ CFU/cm² reductions in the viable count 24 h postinfection compared with control levels. In contrast, bacteriophages applied under these conditions effected a reduction of less than 1 log₁₀ CFU/ml in planktonic cells. Resistance to bacteriophage in bacteria surviving bacteriophage treatment of C. jejuni NCTC 11168 biofilms was 84% and 90% for CP8 and CP30, respectively, whereas bacteriophage resistance was not found in similarly recovered C. jejuni PT14 cells. Dispersal of the biofilm matrix by bacteriophage was demonstrated by crystal violet staining and transmission electron microscopy. Bacteriophage may play an important role in the control of attachment and biofilm formation by Campylobacter in situations where biofilms occur in nature, and they have the potential for application in industrial situations leading to improvements in food safety.     

Assessment of microbial carcass contamination of hunted wild boars

To investigate the microbiological conditions of hunted wild boar carcasses and factors that contribute to the microbial carcass contamination, skin and carcass meat swab samples from 210 hunted wild boars were collected from freshly shot animals. The mean aerobic colony counts (ACCs) and Enterobacteriaceae counts on the skin were 5.2 and 3.6 log₁₀ CFU/cm², with 1.4% of animals’ skin tested positive for Salmonella spp. Slightly higher mean ACC and Enterobacteriaceae counts of 5.4 and 3.8 log₁₀ CFU/cm² were obtained from carcass meat with Salmonella spp. prevalence of 1.9%. Inadequate hygiene practices in handling and dressing wild boar carcasses, such as evisceration in the laying position on the ground and practice of skin and interior carcass surface washing after evisceration, were found to have the most significant influence on the microbiological conditions of final carcasses. Therefore, these findings indicate the need for the implementation and strict adherence to good hygiene practice in hunting estates and game handling establishments.     

Toxicity of 2,3,5,6-tetrachlorophenol to willow trees (Salix viminalis)

Chlorinated phenols have been intensively investigated from an eco-toxicological point of view, however almost nothing is known about toxicity of tetrachlorophenol (TeCP) to higher terrestrial plants. This article applied the willow tree acute toxicity test to study the toxicity of 2,3,5,6-TeCP to willows Salix viminalis (S. viminalis) at neutral and acidic conditions (roughly pH 7 and 4) with inhibition of transpiration as toxic endpoint. At neutral pH the EC₅₀ was >10 mg L^?1 while the EC₅₀ at acidic conditions was 0.32 ± 0.17 mg L^?1, clearly indicating that toxicity is exerted by the non-ionic chemical fraction. Standard tests running at neutral pH are therefore not capturing the full toxicity of weak acids and bases.     

Vibrational Raman optical activity of alanyl peptide oligomers: A new perspective on aqueous solution conformation

The vibrational Raman optical activity (ROA) spectra of di- and tri-L -alanine in the range 650–1750 cm^?1 have been measured in H₂O and D₂O solution at high, neutral, and low pH and pD. Corresponding ROA spectra for tetra- and penta-L -alanine have also been obtained, but over a more restricted set of pH and pD conditions. There are similarities with the ROA spectrum of L -alanine below ～ 1200 cm^?1, but the spectra are very different above this wavenumber due to the influence of the vibrational coordinates of the peptide group. The similar overall appearance of the di-, tri-, and tetrapeptide ROA under selected conditions of pH and pD, and of all four peptide ROA spectra in DCl and HCl solutions, in the backbone skeletal stretch region ～ 1050–1200 cm^?1 and the extended amide III region ～ 1250–1350 cm^?1, suggests that the backbone conformation is approximately the same in all four structures. One difference, however, is a shift of a large positive ROA band in H₂O at ～ 1341 cm^?1 in the dipeptide, assigned to C_α–H and in-plane N–H deformations, down to ～ 1331 cm ^?1 in the tripeptide and to ～ 1315 cm^?1 in the tetrapeptide and pentapeptide (the last in HCl due to insufficient solubility in H₂O), which indicates increasing delocalization of the corresponding normal mode with increasing chain length. Our results do not support the suggestion that stabilizing interactions of the zwitterionic end groups in tri-L -alanine at neutral pH leads to a different solution structure to that at high pH. © 1994 John Wiley & Sons, Inc.     

Succession of Internal Sulfur Cycles and Sulfur-Oxidizing Bacterial Communities in Microaerophilic Wastewater Biofilms

The succession of sulfur-oxidizing bacterial (SOB) community structure and the complex internal sulfur cycle occurring in wastewater biofilms growing under microaerophilic conditions was analyzed by using a polyphasic approach that employed 16S rRNA gene-cloning analysis combined with fluorescence in situ hybridization, microelectrode measurements, and standard batch and reactor experiments. A complete sulfur cycle was established via S⁰ accumulation within 80 days in the biofilms in replicate. This development was generally split into two phases, (i) a sulfur-accumulating phase and (ii) a sulfate-producing phase. In the first phase (until about 40 days), since the sulfide production rate (sulfate-reducing activity) exceeded the maximum sulfide-oxidizing capacity of SOB in the biofilms, H₂S was only partially oxidized to S⁰ by mainly Thiomicrospira denitirificans with NO₃⁻ as an electron acceptor, leading to significant accumulation of S⁰ in the biofilms. In the second phase, the SOB populations developed further and diversified with time. In particular, S⁰ accumulation promoted the growth of a novel strain, strain SO07, which predominantly carried out the oxidation of S⁰ to SO₄²⁻ under oxic conditions, and Thiothrix sp. strain CT3. In situ hybridization analysis revealed that the dense populations of Thiothrix (ca. 10⁹ cells cm⁻³) and strain SO07 (ca. 10⁸ cells cm⁻³) were found at the sulfur-rich surface (100 μm), while the population of Thiomicrospira denitirificans was distributed throughout the biofilms with a density of ca. 10⁷ to 10⁸ cells cm⁻³. Microelectrode measurements revealed that active sulfide-oxidizing zones overlapped the spatial distributions of different phylogenetic SOB groups in the biofilms. As a consequence, the sulfide-oxidizing capacities of the biofilms became high enough to completely oxidize all H₂S produced by SRB to SO₄²⁻ in the second phase, indicating establishment of the complete sulfur cycle in the biofilms.     

Streptococcus oligofermentans Inhibits Streptococcus mutans in Biofilms at Both Neutral pH and Cariogenic Conditions

Homeostasis of oral microbiota can be maintained through microbial interactions. Previous studies showed that Streptococcus oligofermentans, a non-mutans streptococci frequently isolated from caries-free subjects, inhibited the cariogenic Streptococcus mutans by the production of hydrogen peroxide (HP). Since pH is a critical factor in caries formation, we aimed to study the influence of pH on the competition between S. oligofermentans and S. mutans in biofilms. To this end, S. mutans and S. oligofermentans were inoculated alone or mixed at 1:1 ratio in buffered biofilm medium in a 96-well active attachment model. The single- and dual-species biofilms were grown under either constantly neutral pH or pH-cycling conditions. The latter includes two cycles of 8 h neutral pH and 16 h pH 5.5, used to mimic cariogenic condition. The 48 h biofilms were analysed for the viable cell counts, lactate and HP production. The last two measurements were carried out after incubating the 48 h biofilms in buffers supplemented with 1% glucose (pH 7.0) for 4 h. The results showed that S. oligofermentans inhibited the growth of S. mutans in dual-species biofilms under both tested pH conditions. The lactic acid production of dual-species biofilms was significantly lower than that of single-species S. mutans biofilms. Moreover, dual-species and single-species S. oligofermentans biofilms grown under pH-cycling conditions (with a 16 h low pH period) produced a significantly higher amount of HP than those grown under constantly neutral pH. In conclusion, S. oligofermentans inhibited S. mutans in biofilms not only under neutral pH, but also under pH-cycling conditions, likely through HP production. S. oligofermentans may be a compelling probiotic candidate against caries.     

Construction of Defect‐Rich RhCu Nanotubes with Highly Active Rh3Cu1 Alloy Phase for Overall Water Splitting in All pH Values

The combination of precious metals with non‐noble metals is an effective way to develop highly efficient, stable, and low cost electrocatalysts for overall water splitting. Herein, RhCu nanotubes (NTs) with rich structural defects are successfully synthesized by a mixed‐solvent strategy, which display superior activity and excellent stability for both the hydrogen evolution reaction (HER) and oxygen evolution reaction in all pH values. In particular, it only needs 8, 12, and 57 mV to deliver the current density of 10 mA cm^?2 for HER in alkaline, acidic, and neutral conditions, respectively. Experiments combined with density functional theory (DFT) calculations reveal that the exposure of a suitable composition of a highly active Rh₃Cu₁ alloy phase through acid etching is the key to improve electrocatalytic performance, since it weakens the adsorption free energy of atomic oxygen and hydrogen, as well as facilitating the dissociation of water molecules. In addition, the structural defects can also boost the catalytic performance because the adsorption of reactants can be largely enhanced. The results provide a simple method to prepare alloy NTs as highly efficient electrocatalysts for overall water splitting in all pH values.     

Phenotyping using semi-automated BIOLOG and conventional PCR for identification of Bacillus isolated from biofilm of sink drainage pipes

The presence of Bacillus in natural biofilms which develop in sink drainage pipes is not widely studied. Therefore, the main aim of this study was to isolate and identify Bacillus spp. using the BIOLOG GEN III system as a phenotypic fingerprint and polymerase chain reaction (PCR). A total of 61 biofilms samples were collected from sink drainage pipes in a kitchen and bathroom of different households in Helwan area and both laboratory and hospital collected from National Research Centre (NRC). Bacillus was isolated from the biofilms using HiCrome Bacillus Agar followed by isolates identification by both BIOLOG to the species level and PCR using genus specific primers to the genera level. Bacillus was detected in all tested biofilm samples (61 samples). The highest counts were observed in hospital sink drainage pipes (10⁵?CFU/10?cm²) while; the lowest counts were observed in both bathroom and laboratory sink drainage pipes (10²?CFU/10 cm^?2). In total, 61% Bacillus isolates were identified by BIOLOG while, 67% isolates were confirmed by PCR. The diversity of Bacillus among species level using BIOLOG were 34% B. cereus, 23% B. subtilis ss subtilis, 17% B. thuringiensis, 16% B. licheniformis and 13% B. amyloliquefaciens. It can be concluded that; PCR is more sensitive than BIOLOG for identification of Bacillus. However, BIOLOG can identify Bacillus at species level and test 94 carbon and chemical sources on a microplate in one shot. Thus, the combination between phenotyping by BIOLOG and molecular approaches such as PCR for identification of bacterial isolates is recommended.     

Effectiveness of phages in the decontamination of Listeria monocytogenes adhered to clean stainless steel, stainless steel coated with fish protein, and as a biofilm

Listeria monocytogenes is a food-borne pathogen which causes listeriosis and is difficult to eradicate from seafood processing environments; therefore, more effective control methods need to be developed. This study investigated the effectiveness of three bacteriophages (LiMN4L, LiMN4p and LiMN17), individually or as a three-phage cocktail at ≈9 log₁₀ PFU/ml, in the lysis of three seafood-borne L. monocytogenes strains (19CO9, 19DO3 and 19EO3) adhered to a fish broth layer on stainless steel coupon (FBSSC) and clean stainless steel coupon (SSC), in 7-day biofilm, and dislodged biofilm cells at 15 ± 1 °C. Single phage treatments (LiMN4L, LiMN4p or LiMN17) decreased bacterial cells adhered to FBSSC and SSC by ≈3–4.5 log units. Phage cocktail reduced the cells on both surfaces (≈3.8–4.5 and 4.6–5.4 log₁₀ CFU/cm², respectively), to less than detectable levels after ≈75 min (detection limit = 0.9 log₁₀ CFU/cm²). The phage cocktail at ≈5.8, 6.5 and 7.5 log₁₀ PFU/cm² eliminated Listeria contamination (≈1.5–1.7 log₁₀ CFU/cm²) on SSC in ≈15 min. One-hour phage treatments (LiMN4p, LiMN4L and cocktail) in three consecutive applications resulted in a decrease of 7-day L. monocytogenes biofilms (≈4 log₁₀ CFU/cm²) by ≈2–3 log units. Single phage treatments reduced dislodged biofilm cells of each L. monocytogenes strain by ≈5 log₁₀ CFU/ml in 1 h. The three phages were effective in controlling L. monocytogenes on stainless steel either clean or soiled with fish proteins which is likely to occur in seafood processing environments. Phages were more effective on biofilm cells dislodged from the surface compared with undisturbed biofilm cells. Therefore, for short-term phage treatments of biofilm it should be considered that some disruption of the biofilm cells from the surface prior to phage application will be required.     

Attachment of and Biofilm Formation by Enterobacter sakazakii on Stainless Steel and Enteral Feeding Tubes

Enterobacter sakazakii has been reported to form biofilms, but environmental conditions affecting attachment to and biofilm formation on abiotic surfaces have not been described. We did a study to determine the effects of temperature and nutrient availability on attachment and biofilm formation by E. sakazakii on stainless steel and enteral feeding tubes. Five strains grown to stationary phase in tryptic soy broth (TSB), infant formula broth (IFB), or lettuce juice broth (LJB) at 12 and 25°C were examined for the extent to which they attach to these materials. Higher populations attached at 25°C than at 12°C. Stainless steel coupons and enteral feeding tubes were immersed for 24 h at 4°C in phosphate-buffered saline suspensions (7 log CFU/ml) to facilitate the attachment of 5.33 to 5.51 and 5.03 to 5.12 log CFU/cm², respectively, before they were immersed in TSB, IFB, or LJB, followed by incubation at 12 or 25°C for up to 10 days. Biofilms were not produced at 12°C. The number of cells of test strains increased by 1.42 to 1.67 log CFU/cm² and 1.16 to 1.31 log CFU/cm² in biofilms formed on stainless steel and feeding tubes, respectively, immersed in IFB at 25°C; biofilms were not formed on TSB and LJB at 25°C, indicating that nutrient availability plays a major role in processes leading to biofilm formation on the surfaces of these inert materials. These observations emphasize the importance of temperature control in reconstituted infant formula preparation and storage areas in preventing attachment and biofilm formation by E. sakazakii.     

Colorimetric assay for biofilms in wet processing conditions

Controlling bacterial biofilms is necessary for food safety and industrial processing in clean room environments. Our goal was to develop a method to quantitatively measure biofilm produced by pathogens under wet poultry production and processing conditions. Stainless steel and glass coupons were incubated in aqueous media containing reduced nutrients and exposed to Listeria monocytogenes under static temperature and humidity conditions. Samples were measured separately by biofilm assay and viable cell density, and then confirmed by spectrophotometry and microscopy. The biofilm assay resulted in different t groupings from the cell density. The mean from the biofilm assay was 0.50, and the error% was 0.595. The mean of the log₁₀ density (cfu/cm²) was 5.90, and the standard deviation ranged from 0.127 to 0.438 on 24 coupons. The typical sequence of biofilm development, followed by microscopy of biofilm grown on glass coupons, exhibited a change from dispersed single cells to an all-over pattern of clumps with few dispersed cells. L. monocytogenes formed biofilms on all of the substrata tested. Bacterial counts from planktonic cultures at 24, 48, 72, and 144 h confirmed that L. monocytogenes remained viable throughout the experiment and reached equilibrium between 6 and 24 h. The cell density log₁₀/ml was 8.01, 8.03, 7.69, and 6.66, respectively; and the standard deviation ranged from 0.156 to 0.394. The data will be used to grow stable biofilms of Listeria spp. collected from the food processing environment for further study. This is the first use of the crystal violet assay for measurement of bacterial biofilms on stainless steel under these conditions. The methods tested are applicable to other bacteria and substrata.     

Combination of high‐frequency ultrasound and UV radiation of excilamp for surface disinfection

The combination of high‐frequency ultrasound (HFUS) and UV represents a new approach to disinfecting surfaces. This study aimed to examine the inactivation efficiency of HFUS (1.7 MHz) and monochromatic UV radiation of KrCl excilamp (222 nm) in a single and a sequential mode against Bacillus cereus cells and spores added to glass surfaces. When treated by UV only, cells at populations of 10³, 10⁴, and 10⁵ colony‐forming units (CFU)/cm² showed 100% disinfection at high doses up to 1760 mJ/cm². Spores at 10⁴ CFU/cm² were completely inactivated at a dose of 1170 mJ/cm². Treatment with aqueous aerosol (produced by HFUS) reduced cell counts by 100% within a 40‐min exposure, whereas it was ineffective in inactivating spores under these conditions. In a sequential mode, the contaminated surface was pretreated with the sonicated aqueous aerosol and subsequently irradiated with the excilamp. It was found that HFUS exposure times and UV doses for complete inactivation decreased by a factor of 2 and 6–7, respectively, compared to sole HFUS or UV. A portable apparatus for surface disinfection was designed. The combined HFUS/UV method may be a promising technique for rapid disinfection of microbially contaminated surfaces.