Contribution of the heme propionate groups to the electron transfer and electrostatic properties of myoglobin

The role of the heme propionate groups in determining the electron transfer and electrostatic properties of myoglobin have been studied by thermodynamic, kinetic, and spectroscopic studies of horse heart myoglobin in which the heme propionate groups are esterified. Spectroelectrochemical analysis has established that the E_m,7 of dimethylester heme-substituted Mb (DME-Mb) (E_m,7 = 100.2(2) mV vs. NHE (Normal Hydrogen Electrode) (25 °C) is increased  40 mV relative to that of the native protein with ΔH° = −12.9(2) kcal/mol and ΔS° = −51.0(8) cal/mol/deg (pH 7.0, μ = 0.1 M (phosphate)). The second order rate constant for reduction of DME-metMb by Fe(EDTA)²⁻ is increased  > 400-fold relative to that for reduction of native metMb to a value of 1.34(2) × 10³ M⁻¹ s⁻¹ with ΔS^‡ = −13(1) cal/mol/deg and ΔH^‡ = 9.2(3) (pH 7.0, μ = 0.1 M (phosphate)). Analysis of the pH dependences of the reduction potential and rate constant for reduction by Fe(EDTA)²⁻ demonstrates that heme propionate esterification introduces significant changes into the electrostatic interactions in myoglobin. These changes are also manifested by differences in the pH dependences of the ¹H NMR spectra of native and DME-metMb that reveal shifts in pK_a values for specific His residues as the result of heme propionate esterification. In sum, the current results establish that heme propionate esterification not only affects the electron transfer properties of myoglobin but also influences the titration behavior of specific His residues.     

A study in UF-membrane reactor on activity and stability of nitrile hydratase from Microbacterium imperiale CBS 498-74 resting cells for propionamide production

The bioconversion of propionitrile to propionamide was catalysed by nitrile hydratase (NHase) using resting cells of Microbacterium imperiale CBS 498-74 (formerly, Brevibacterium imperiale). This microorganism, cultivated in a shake flask, at 28 °C, presented a specific NHase activity of 34.4 U mg_DCW⁻¹ (dry cell weight). The kinetic parameters, K_m and V_max, tested in 50 mM sodium phosphate buffer, pH 7.0, in the propionitrile bioconversion was evaluated in batch reactor at 10 °C and resulted 21.6 mM and 11.04 μmol min⁻¹ mg_DCW⁻¹, respectively. The measured apparent activation energy, 25.54 kJ mol⁻¹, indicated a partial control by mass transport, more likely through the cell wall.

UF-membrane reactors were used for kinetic characterisation of the NHase catalysed reaction. The time dependence of enzyme deactivation on reaction temperature (from 5 to 25 °C), on substrate concentrations (from 100 to 800 mM), and on resting cell loading (from 1.5 to 200 μg  ml⁻¹) indicated: lower diffusional control (E_a=37.73 kJ mol⁻¹); and NHase irreversible damage caused by high substrate concentration. Finally, it is noteworthy that in an integral reactor continuously operating for 30 h, at 10 °C, 100% conversion of propionitrile (200 mM) was attained using 200 μg  ml⁻¹ of resting cells, with a maximum volumetric productivity of 0.5 g l⁻¹ h⁻¹.     

Production of cyclodextrin by poly-lysine fused Bacillus macerans cyclodextrin glycosyltransferase immobilized on cation exchanger

Bacillus macerans cyclodextrin glycosyltransferase (CGTase) fused with 10 lysine residues at its C-terminus (CGTK10ase) was immobilized onto a cation exchanger by ionic interaction and used to produce -cyclodextrin (CD) from soluble starch. Poly-lysine fused immobilization increased the V_m of the immobilized CGTase by 40% without a change in K_m. The activation energies of thermal deactivation (E_a) were 41.4, 28.1, and 25.9 kcal mol⁻¹, respectively, for soluble wild-type (WT) CGTase, soluble CGTK10ase, and immobilized CGTK10ase, suggesting destabilization of CGTase by poly-lysine fusion and immobilization onto a cation exchanger. Maximum -CD productivity of 539.4 g l⁻¹ h⁻¹ was obtained with 2% soluble starch solution which was constantly fed at a flow rate of 4.0 ml min⁻¹ (D = 240 h⁻¹) in a continuous operation mode of a packed-bed reactor. The operational half-life of the packed-bed enzyme reactor was estimated 12 days at 25 °C and pH 6.0.     

Heat tolerance of short-beaked echidnas (Tachyglossus aculeatus) in the field

(1) Echidnas occur throughout the hot arid zone of Australia yet laboratory studies have concluded that they are ill equipped physiologically to manage T_a higher than 35°C. (2) Consequently, it is generally assumed that echidnas must rely on behavioural thermoregulation, being nocturnal in hot weather and seeking less extreme microclimates during the day. (3) By monitoring T_b of echidnas in the field and relating these to T_a within their day time shelters in Western Queensland during summer, this study showed that echidnas are able to tolerate T_a of 35–40°C in hollow logs for up to 10 h. (4) Further, as T_b remains < T_a in these situations, echidnas may have physiological mechanisms for dealing with the heat after all.     

The effect of acclimation on the acid-base status of pigeons exposed to high ambient temperatures

Arterial pH, PCO₂ (P_aCO₂), plasma bicarbonate [HCO₃⁻ and respiratory frequency were measured in pigeons exposed to ambient temperatures (T_aS) of 30–60°C. Acclimated, nonpanting birds regulated acid-base balance at normal levels, when exposed to T_as) between 30 and 53°C T_a. At higher T_as (55–60°C), both nonpanting and panting acclimated pigeons regulated pH at normal levels, 7.544 ± 0.011 (SD) and 7.531 ± 0.022 (SD), respectively, accompanied by a slight hypocapnia, 24.8 ± 4.0 Torr and 23.8 ± 2.49 Torr (P_aCO₂), respectively. Nonacclimated birds, exposed to 50°C T_a, endured a severe hypocapnia (P_aCO₂ of 9.1 ± 2.52 Torr) and alkalosis (pH of 7.702 ± 0.048). Thirteen exposures to > 50°C T_a, 4–6 h a day, resulted in a significant improvement in the capacity of the panting pigeon to maintain an almost normal acid-base balance, i.e. actual and standard [HCO₃⁻ of 22.6 ± 1.22 and 25.7 ± 1.10 mM/l, respectively, and only a slight hypocapnia (P_aCO₂ of 23.6 ± 3.9 Torr) and alkalosis (pH of 7.589). The suggestion that acclimation to high T_as (50–60°C) is needed for fine adjustment between the competing needs for heat dissipation, pulmonary gas exchange, and acid-base regulation in the heat-exposed pigeon is discussed.     

Multi-temperature effects on Hill reaction activity of barley chloroplasts

1. 1. The relationship between temperature and Hill reaction activity has been investigated in chloroplasts isolated from barley (Hordeum vulgare L. cv. Abyssinian).

2. 2. An Arrhenius plot of the photoreduction of 2,6-dichlorophenolindophenol (DCIP) showed no change in slope over the temperature range 2–38 °C. The apparent Arrhenius activation energy (E_a) for the reaction was 48.1 kJ/mol.

3. 3. In the presence of an uncoupler of photophosphorylation, methylamine, the E_a for DCIP photoreduction went through a series of changes as the temperature was increased. Changes were found at 9, 20, 29 and 36 °C. The E_a was highest below 9 °C at 63.7 kJ/mol. Between 9 and 20 °C the E_a decreased to 40.4 kJ/mol and again to 20.2 kJ/mol between 20 and 29 °C. Between 29 and 36 °C there was no further increase in activity with increasing temperature. The temperature-induced changes at 9, 20 and 29 °C were reversible. At temperatures above 36 °C (2 min) a thermal and largely irreversible inactivation of the Hill reaction occurred.

4. 4. Temperature-induced changes in E_a were also found when ferricyanide was substituted for DCIP or gramicidin D for methylamine. The addition of an uncoupler of photophosphorylation was not required to demonstrate temperature-induced changes in DCIP photoreduction following the exposure of the chloroplasts to a low concentration of cations.

5. 5. The photoreduction of the lipophilic acceptor, oxidized 2, 3, 5, 6-tetramethyl-p-phenylenediamine, also showed changes in E_a in the absence of an uncoupler.

6. 6. The temperature-induced changes in Hill activity at 9 and 29 °C coincided with temperature-induced changes in the fluidity of chloroplast thylakoid membranes as detected by measurements of electron spin resonance spectra. It is suggested that the temperature-induced changes in the properties and activity of chloroplast membranes are part of a control mechanism for regulation of chloroplast development and photosynthesis by temperature.

Rheological properties of barley β-glucan

Health benefits of cereal β-glucan are linked to its high viscosity. Although viscosity of β-glucan gum solutions has been reported previously, there are conflicting reports about its behavior at elevated temperatures. Therefore, the viscosity behavior of barley β-glucan gum obtained in a pilot plant (PP) or in a laboratory (LAB) was determined at different shear rates (1.29–129 s⁻¹) and temperatures (0.1–75 °C) in this study. Viscosity decrease with temperature was demonstrated for both gums and activation energy E_a was calculated from the Arrhenius equation. None of the fresh gum solutions exhibited thixotropic behavior at ≤1% (w/w) concentration, but the measurement demonstrated that increased shear rate is not applicable to polymer solutions of low viscosity. Information about rheological properties of β-glucan will lead to better understanding of its behavior under physiological and processing conditions.     

Polyvinylferrocenium immobilized enzyme electrode for choline analysis

The response characteristics of a new enzyme electrode for determining choline are reported. The enzyme electrode consists of a polyvinylferrocenium perchlorate coated Pt surface onto which the enzyme, choline oxidase, is attached. Choline oxidase catalyzes the oxidation of choline to betaine, producing H₂O₂. Current due to H₂O₂ oxidation catalyzed by polyvinylferrocenium centers was measured. The effects of choline concentration, the amount of enzyme immobilized and the operating pH and temperature on the response of the enzyme electrode were studied. The effects of interferents were also investigated. The response time was found to be 60–70 s and the upper limit of the linear working portion was found to be 1.2 mM choline concentration. The minimum substrate concentration that produced detectable current was 4.0×10⁻⁶ M choline concentration. The steady-state current of this enzyme electrode was reproducible within ±4.6% of relative error. The apparent Michaelis–Menten constant (K_Mapp) and the activation energy, E_a, of this immobilized enzyme system were found to be 2.32 mM and 38.91 kJ/mol, respectively.     

Gelation of xanthan with trivalent metal ions

In-situ gelation of semidilute xanthan solutions with trivalent chromium, aluminum or iron ions was studied by rheology and UV-spectroscopy. Measurements of the elastic modulus of xanthan gel cylinders prepared by dialysis against the complexing ion at pH values from 2 to 6 indicate that monomeric species of the ion are ineffective, whereas dimeric or higher oligomeric species are effective in crosslinking the polysaccharide. When chromium was used as the crosslinking species, the dependence of the gelation rate on the ionic concentration followed a power law with a coefficient of 1·7. The gelation time and the gelation rate were found to extrapolate to zero at 1 m Cr for 2·5 mg/ml xanthan. The limiting concentration of xanthan needed for gelation with 5 m Cr(III) at 20°C was estimated as 0·35 mg/ml. This critical xanthan concentration is close to the overlap concentration c^* estimated from the experimentally determined intrinsic viscosity [η] using c^* = 1·4/[η]. An apparent activation energy for crosslinking of xanthan was calculated as E_a = 42 kJ/mol and E_a = 108 kJ/mol for Cr and Al ions, respectively. The fractal dimensionality of xanthan-Cr at the sol-gel transition was estimated as 1·3 applying the Chambon-Winter criterion for gelation, thus indicating that this gelation criterion is applicable also to stiff-chain polysaccharides such as xanthan.     

Structure and thermal decomposition of methylamine borane

The crystal structure of methylamine borane has been determined and contains parallel chains of dihydrogen-bonded CH₃NH₂BH₃ molecules. Thermal decomposition takes place from the melt (ΔH_fusion = 8.5 kJ mol⁻¹) and begins with the formation of an ionic borohydride. Hydrogen is liberated in two stages, at ca. 100 and 190 °C, with the observed rates during the first stage (ΔH = −25 kJ mol⁻¹, E_a = 115 kJ mol⁻¹) strongly dependent on temperature and time. cis- and trans-N-trimethylcyclotriborazane are formed during the first stage and subsequently cross-link to yield a non-volatile solid. Before this cross-linking, the system exhibited a high degree of volatility, with weight losses in excess of 80% observed in TG experiments using flowing gas.     

Dinuclear palladium(II) complexes containing two monofunctional [Pd(en)(pyridine)Cl] units bridged by Se or S. Synthesis, characterization, cytotoxicity and kinetic studies of DNA-binding

Two novel dinuclear palladium(II) complexes, {[Pd(en)Cl]₂(bpse)}(NO₃)₂ (1) and {[Pd(en)Cl]₂ (bpsu)}(NO₃)₂ (2), (where en is ethylenediamine; bpse is bis(3-methyl-4-pyridyl) selenide; bpsu is bis(3-methyl-4-pyridyl) sulfide) have been synthesized. The complexes have been characterized by elemental analysis, IR, ¹H NMR, and ¹³C NMR. They have been assayed for antitumor activity in vitro against the mice leukemia L1210 and the human coloadenocarcinoma HCT8 cell lines. The results show that compound 1 has a lower I.D.₅₀ value against the two cancer cell lines as compared to compound 2; the compounds also shows a lower I.D.₅₀ value than cisplatin against the HCT8 cell line, but a higher I.D.₅₀ value than cisplatin against the L1210 cell line. Binding studies indicate that compound 1 possibly interacts with DNA by a nonintercalative mode. Kinetics of binding of the two compounds to DNA are firstly studied using ethidium bromide as a fluorescence probe with stopped-flow spectrophotometer under pseudo-first-order condition. The stronger binding of two steps in the process of the compounds interacting with DNA are observed, and the k_obs and E_a of binding of the two steps (where k_obs is the observed pseudo-first-order rate constant, E_a is the observed energy of activation) are obtained.     

Comparative thermodynamic elucidation of the structural stability of thermophilic proteins

Differential scanning calorimetry, circular dichroism, and visible absorption spectrophotometry were employed to elucidate the structural stability of thermophilic phycocyanin derived from Cyanidium caldarium, a eucaryotic organism which contains a nucleus, grown in acidic conditions (pH 3.4) at 54°C. The obtained results were compared with those previously reported for thermophilic phycocyanin derived from Synechococcus lividus, a procaryote containing no organized nucleus, grown in alkaline conditions (pH 8.5) at 52°C. The temperature of thermal unfolding (t_d) was found to be comparable between C. caldarium (73°C) and S. lividus (74°C) phycocyanins. The apparent free energy of unfolding (ΔG_[urea]=0) at zero denaturant (urea) concentration was also comparable: 9.1 and 8.7 kcal/mole for unfolding the chromophore part of the protein, and 5.0 and 4.3 kcal/mole for unfolding the apoprotein part of the protein, respectively. These values of t_d and ΔG_[urea]=0 were significantly higher than those previously reported for mesophilic Phormidium luridum phycocyanin (grown at 25°C). These findings revealed that relatively higher values of t_d and ΔG_[urea]=0 were characteristics of thermophilic proteins. In contrast, the enthalpies of completed unfolding (ΔH_d) and the half-completed unfolding (ΔH_d)1/2 for C. caldarium phycocyanin were much lower than those for S. lividus protein (89 versus 180 kcal/mole and 62 versus 115 kcal/mole, respectively). Factors contributing to a lower ΔH_d in C. caldarium protein and the role of charged groups in enhancing the stability of thermophilic proteins were discusse.     

Beta-endorphin-like peptide SLTCLVKGFY reduces the production of 11-oxycorticosteroids by rat adrenal cortex through nonopioid beta-endorphin receptors

β-Endorphin-like peptide immunorphin (SLTCLVKGFY), a selective agonist of nonopioid β-endorphin receptor, was labeled with tritium to specific activity of 24 Ci/mmol. It was used for the detection and characterization of nonopioid β-endorphin receptors on rat adrenal cortex membranes (K_d=31.6±0.2 nM, B_max=37.4±2.2 pmol/mg protein). Immunorphin at concentrations of 10⁻⁹ to 10⁻⁶ M was found to inhibit the adenylate cyclase activity in adrenal cortex membranes, while intramuscular injection of immunorphin at doses of 10–100 μg/kg was found to reduce the secretion of 11-oxycorticosteroids from the adrenals to the bloodstream.     

Comparative aspects of the thermal biology of the short-tailed gerbil, Desmodillus auricularis, and the bushveld gerbil, Tatera leucogaster

1. 1. The response of oxygen consumption (VO₂), thermal conductance (C_d and C_min, body temperature (T_b), and evaporative water loss (EWL) of Tatera leucogaster and Desmodillus auricularis were measured over the range of ambient temperatures (T_a) from 5–35°C.

2. 2. Basal metabolic rate (BMR) of T. leucogaster was 0.841 ± 0.049 ml O₂ g⁻¹ h⁻¹ and lower than predicted, while that of D. auricularis was similar to the expected value (1.220 ± 0.058 ml O₂ g⁻¹ h⁻¹). D. auricularis had a high, narrow thermoneutral zone (TNZ) typical of nocturnal, xerophilic, burrowing rodents.

3. 3. D. auricularis and T. leucogaster regulated T_b over the range T_a = 5–35°C and kept EWL and dry thermal conductance at a minimum below the TNZ. However, the EWL of T. leucogaster increased rapidly above T_a = 30°C.

4. 4. After comparison with data from other species, it was concluded that there is an optimum size for xeric, nocturnal, burrowing rodents.

Activities and relative affinities of divalent metals in unmodified and phosphorothioate-substituted hammerhead ribozymes

The roles of metals in the phosphodiester bond cleavage reaction performed by the hammerhead ribozyme are under investigation. In this study, the apparent affinities and the abilities of several different metals to support ribozyme activity are reported. The relative affinities of divalent cations for the hammerhead ribozyme are determined by measuring their ability to release bound Mn²⁺. The EPR-detected Mn²⁺ competition studies give an order of apparent affinity of Mn²⁺ Co²⁺ Zn²⁺>Cd²⁺Mg²⁺. This ordering generally follows the trend of maximum rates of cleavage determined at pH 7.0, 0.1 M NaCl, and saturating metal concentrations, of Mn²⁺>Co²⁺>Cd²⁺>Mg²⁺. The maximum rate is observed for Mn²⁺ under these conditions and may be related to the high affinity, low pK_a and low ΔH_hyd of this ion. Substitution of phosphorothioates 5′ to each of the nine adenosines in the enzyme strand yields a change in the Mn²⁺ binding properties of the hammerhead complex. In the phosphorothioate-substituted hammerhead complex, eight to nine Mn²⁺ bind in two types of classes: ‘type 1’ (n=1±0.3, K_d=1.1±1 μM) and weaker ‘type 2’ (n=7.7±0.3, K_d=125±27 μM). The multiple phosphorothioate substitutions result in the loss of two to three of the higher affinity sites observed in the unmodified ribozyme. Metal competition studies with the phosphorothioate-substituted ribozyme indicate that the relative affinities of the metals are Cd²⁺>Zn²⁺>Co²⁺, Mg²⁺ with the number of Mn²⁺ displaced and apparent affinity of the thiophilic Cd²⁺ most affected by the phosphorothioate substitutions.     

The reaction between primary and secondary electron acceptors in bacterial photosynthesis

Following a 20-nsec actinic flash, which causes oxidation of P870 and cytochrome C422, Chromatium chromatophores enter a refractory state. While the chromatophores are in this state, a second flash does not cause further oxidation of P870 or cytochrome C422. The quanta of the second flash are wasted as fluorescence (and heat); apparently they do not energize an alternative photochemical reaction. The refractory state probably reflects the accumulation of the primary electron acceptor in a reduced form. By following the reappearance of the capacity for photochemistry, one can measure the kinetics of electron transfer between the primary electron acceptor and the secondary agent which reoxidizes it. In Chromatium chromatophores, this process requires about 60 μsec to proceed half-way to completion at pH 7, and 80 μsec at pH 8. The rate of the reaction increases with decreasing pH, but not in direct proportion to the proton concentration. It increases with temperature, with an E_a of about 8.3 kcal/mole. The kinetics are approximately second order in the concentration of the reduced acceptor.     

Changes in denaturation and rheological properties of collagen-hyaluronic acid scaffolds as a result of temperature dependencies

This report describes the effect of temperature on the mechanical viscoelastic properties such as: storage modulus (E′), loss modulus (E″), and loss tangent (tan δ) of the collagen sponges modified with hyaluronic acid (HA). In order to detect collagen–HA copolymer denaturation and to assess its thermal stability, the differential scanning calorimetry (DSC) supplemented by thermogravimetric (TG) measurements was used. The denaturation temperature (T_d) of unmodified collagen samples increased from 69 to 86 °C for cross-linked samples, respectively. These temperature dependencies show remarkable changes in E′ and E″ at selected temperature up to 226 °C for all samples due to the release of loosely and strongly bound water. The influence of HA on the viscoelastic behavior of collagen is manifested by a shift of the tan δ peak associated with the process of decomposition towards higher temperatures resulting in a higher thermo-stability of the modified scaffolds.     

Study of the swelling dynamics with overshooting effect of hydrogels based on sodium alginate-g-acrylic acid

A series of hydrogels were synthesized by graft cross-link copolymerization of sodium alginate (SA) and acrylic acid (AA) using N, N-methylene-bis-(acrylamide) as a cross-linker. By study of the swelling kinetics of the hydrogels in different buffer solutions, the overshooting effect was observed in acidic medium, namely the gels firstly swelled to a maximum value following by a gradual deswelling until the equilibrium. The phenomenon is interpreted as a cooperative physical cross-linking caused by the hydrogen bond formation between the carboxyl groups of the hydrogels in a hydrophobic environment. The hydrogen bond formation was further confirmed by FT-IR spectra. The dependence of overshooting effect on the pH of buffer solution was more noticeable in comparison with the composition of hydrogels, demonstrating that the cooperative physical cross-linking caused by the hydrogen bond formation is dominant. Whether or not the overshooting effect appears is not only relative to the pH of buffer solution, but also depends on the pK_a of carboxyl groups on the network. The overshoot processes of the hydrogels under acidic medium at pH below the pK_a follow a quantitative model proposed by Díez-Peńa et al., and the theoretical curves are in very good agreement with the experimental data. While in pH > pK_a buffer solutions, the overshoot phenomenon does not appear arising from the repulsive interaction between the ionized carboxyl groups, the swelling processes follow Schott second-order rate equation.     

Quantitative techniques for steady-state calculation and dynamic integrated modelling of membrane potential and intracellular ion concentrations

The membrane potential (E_m) is a fundamental cellular parameter that is primarily determined by the transmembrane permeabilities and concentration gradients of various ions. However, ion gradients are themselves profoundly influenced by E_m due to its influence upon transmembrane ion fluxes and cell volume (V_c). These interrelationships between E_m, V_c and intracellular ion concentrations make computational modelling useful or necessary in order to guide experimentation and to achieve an integrated understanding of experimental data, particularly in complex, dynamic, multi-compartment systems such as skeletal and cardiac myocytes. A variety of quantitative techniques exist that may assist such understanding, from classical approaches such as the Goldman–Hodgkin–Katz equation and the Gibbs–Donnan equilibrium, to more recent “current-summing” models as exemplified by cardiac myocyte models including those of DiFrancesco & Noble, Luo & Rudy and Puglisi & Bers, or the “charge-difference” modelling technique of Fraser & Huang so far applied to skeletal muscle. In general, the classical approaches provide useful and important insights into the relationships between E_m, V_c and intracellular ion concentrations at steady state, providing their core assumptions are fully understood, while the more recent techniques permit the modelling of changing values of E_m, V_c and intracellular ion concentrations. The present work therefore reviews the various approaches that may be used to calculate E_m, V_c and intracellular ion concentrations with the aim of establishing the requirements for an integrated model that can both simulate dynamic systems and recapitulate the key findings of classical techniques regarding the cellular steady state. At a time when the number of cellular models is increasing at an unprecedented rate, it is hoped that this article will provide a useful and critical analysis of the mathematical techniques fundamental to each of them.     

Immobilization of hemoglobin on electrodeposited cobalt-oxide nanoparticles: direct voltammetry and electrocatalytic activity

Cyclic voltammetry at potential range − 1.1 to 0.5 V from aqueous buffer solution (pH 7) containing CoCl₂ produced a well defined cobalt oxide (CoOx) nanoparticles deposited on the surface of glassy carbon electrode. The morphology of the modified surface and cobalt oxide formation was examined with SEM and cyclic voltammetry techniques. Hemoglobin (Hb) was successfully immobilized in cobalt-oxide nanoparticles modified glassy carbon electrode. Immobilization of hemoglobin onto cobalt oxide nanoparticles have been investigated by cyclic voltammetry and UV–visible spectroscopy. The entrapped protein can take direct electron transfer in cobalt-oxide film. A pair of well defined, quasi-reversible cyclic voltammetric peaks at about − 0.08 V vs. SCE (pH 7), characteristic of heme redox couple (Fe(III)/Fe(II)) of hemoglobin, and the response showed surface controlled electrode process. The dependence of formal potential (E^0′) on the solution pH (56 mV pH^− 1) indicated that the direct electron transfer reaction of hemoglobin was a one-electron transfer coupled with a one proton transfer reaction process. The average surface coverage of Hb immobilized on the cobalt oxide nanoparticles was about 5.2536 × 10^− 11 mol cm^− 2_, indicating high loading ability of nanoparticles for hemoglobin entrapment. The heterogeneous electron transfer rate constant (k_s) was 1.43 s^− 1, indicating great of facilitation of the electron transfer between Hb and electrodeposited cobalt oxide nanoparticles. Modified electrode exhibits a remarkable electrocatalytic activity for the reduction of hydrogen peroxide and oxygen. The Michaels–Menten constant K_m of 0.38 mM, indicating that the Hb immobilized onto cobalt oxide film retained its peroxidases activity. The biosensor exhibited a fast amperometric response < 5 s, a linear response over a wide concentration range 5 μM to 700 μM and a low detection limit 0.5 μM. According to the direct electron transfer property and enhanced activity of Hb in cobalt oxide film, a third generation reagentless biosensor without using any electron transfer mediator or specific reagent can be constructed for determination of hydrogen peroxide in anaerobic solutions.