Freshwater diatoms as a source of lipids for biofuels

Until recently, biodiesel production has been derived from terrestrial plants such as soybean and canola, leading to competition between biodiesel production and agricultural production for source materials. Microalgae have the potential to synthesize 30 times more oil per hectare than terrestrial plants without competing for agricultural land. We examined four genera (Cyclotella, Aulacoseira, Fragilaria, Synedra) of common freshwater diatoms (Bacillariophyceae) for growth and lipid content in defined medium (sD11) that replicates hypereutrophic conditions in lakes and wastewater treatment plant effluents and optimized the medium for silicon content. Cyclotella and Aulacoseira produced the highest levels of total lipids, 60 and 43 μg total lipids/ml, respectively. Both diatoms are rich in fatty acids C14, C16, C16:1, C16:2,7,10, and C22:5n3. Of the diatoms examined, Cyclotella reached the highest population density (>2.5 × 10⁶ cells/ml) in stationary phase when many of the cells appeared to be filled entirely with oil. Silicon enrichment studies indicated that for optimal utilization of phosphorus and nitrogen by diatoms growing in wastewater effluent, the amount of silicon present or added to the effluent should be 17.5 times the mass of phosphorus in the effluent. With high growth rates, high lipid contents, and rapid settling rates, Cyclotella and Aulacoseira are candidates for biodiesel production.     

Biofilm formation and interactions of bacterial strains found in wastewater treatment systems

Biofilm formation and adherence properties of 13 bacterial strains commonly found in wastewater treatment systems were studied in pure and mixed cultures using a crystal violet microtiter plate assay. Four different culture media were used, wastewater, acetate medium, glucose medium and diluted nutrient broth. The medium composition strongly affected biofilm formation. All strains were able to form pure culture biofilms within 24 h in at least one of the tested culture media and three strains were able to form biofilm in all four culture media, namely Acinetobacter calcoaceticus ATCC 23055, Comamonas denitrificans 123 and Pseudomonas aeruginosa MBL 0199. The adherence properties assessed were initial adherence, cell surface hydrophobicity, and production of amyloid fibers and extracellular polymeric substances. The growth of dual-strain biofilms showed that five organisms formed biofilm with all 13 strains while seven formed no or only weak biofilm when cocultured. In dual-strain cultures, strains with different properties were able to complement each other, giving synergistic effects. Strongest biofilm formation was observed when a mixture of all 13 bacteria were grown together. These results on attachment and biofilm formation can serve as a tool for the design of tailored systems for the degradation of municipal and industrial wastewater.     

Influence of different combinations of bacteria and yeasts in voice prosthesis biofilms on air flow resistance

Laryngectomized patients use silicone rubber voice prostheses to rehabilitate their voice. However, biofilm formation limits the lifetime of voice prostheses. The presence of particular combinations of bacterial and yeast strains in voice prosthesis biofilms has been suggested to be crucial for causing valve failure. In order to identify combinations of bacterial and yeast strains causative to failure of voice prostheses, the effects of various combinations of bacterial and yeast strains on air flow resistances of Groningen button voice prostheses were determined. Biofilms were grown on Groningen button voice prostheses by inoculating so-called artificial throats with various combinations of clinically relevant bacterial and yeast strains. After 3 days, all throats were perfused three times daily with 250 ml phosphate buffered saline and at the end of each day the artificial throats were filled with growth medium for half an hour. After 7 days, the air flow resistances of the prostheses were measured. These air flow resistances were expressed relative to the air flow resistances of the same prostheses prior to biofilm formation. This study shows that biofilms causing strong increases in air flow resistance (26 to 28 cm water.s/l) comprised combinations of microorganisms, involving Candida tropicalis, Staphylococcus aureus and Rothia dentocariosa. This revised version was published online in June 2006 with corrections to the Cover Date.     

Impacts of hydrodynamic conditions and microscale surface roughness on the critical shear stress to develop and thickness of early-stage Pseudomonas putida biofilms

Biofilms can increase pathogenic contamination of drinking water, cause biofilm-related diseases, alter the sediment erosion rate, and degrade contaminants in wastewater. Compared with mature biofilms, biofilms in the early-stage have been shown to be more susceptible to antimicrobials and easier to remove. Mechanistic understanding of physical factors controlling early-stage biofilm growth is critical to predict and control biofilm development, yet such understanding is currently incomplete. Here, we reveal the impacts of hydrodynamic conditions and microscale surface roughness on the development of early-stage Pseudomonas putida biofilm through a combination of microfluidic experiments, numerical simulations, and fluid mechanics theories. We demonstrate that early-stage biofilm growth is suppressed under high flow conditions and that the local velocity for early-stage P. putida biofilms (growth time < 14 h) to develop is about 50 μm/s, which is similar to P. putida's swimming speed. We further illustrate that microscale surface roughness promotes the growth of early-stage biofilms by increasing the area of the low-flow region. Furthermore, we show that the critical average shear stress, above which early-stage biofilms cease to form, is 0.9 Pa for rough surfaces, three times as large as the value for flat or smooth surfaces (0.3 Pa). The important control of flow conditions and microscale surface roughness on early-stage biofilm development, characterized in this study, will facilitate future predictions and managements of early-stage P. putida biofilm development on the surfaces of drinking water pipelines, bioreactors, and sediments in aquatic environments.     

Evaluating scaling of capillary photo-biofilm reactors for high cell density cultivation of mixed trophies artificial microbial consortia

Capillary biofilm reactors (CBRs) are attractive for growing photoautotrophic bacteria as they allow high cell-density cultivation. Here, we evaluated the CBR system's suitability to grow an artificial consortium composed of Synechocystis sp. PCC 6803 and Pseudomonas sp. VBL120. The impact of reactor material, flow rate, pH, O₂, and medium composition on biomass development and long-term biofilm stability at different reactor scales was studied. Silicone was superior over other materials like glass or PVC due to its excellent O₂ permeability. High flow rates of 520 μL min⁻¹ prevented biofilm sloughing in 1 m capillary reactors, leading to a 54% higher biomass dry weight combined with the lowest O₂ concentration inside the reactor compared to standard operating conditions. Further increase in reactor length to 5 m revealed a limitation in trace elements. Increasing trace elements by a factor of five allowed for complete surface coverage with a biomass dry weight of 36.8 g m⁻² and, thus, a successful CBR scale-up by a factor of 25. Practical application : Cyanobacteria use light energy to upgrade CO₂, thereby holding the potential for carbon-neutral production processes. One of the persisting challenges is low cell density due to light limitations and O₂ accumulation often occurring in established flat panel or tubular photobioreactors. Compared to planktonic cultures, much higher cell densities (factor 10 to 100) can be obtained in cyanobacterial biofilms. The capillary biofilm reactor (CBR) offers good growth conditions for cyanobacterial biofilms, but its applicability has been shown only on the laboratory scale. Here, a first scale-up study based on sizing up was performed, testing the feasibility of this system for large-scale applications. We demonstrate that by optimizing nutrient supply and flow conditions, the system could be enlarged by factor 25 by enhancing the length of the reactor. This reactor concept, combined with cyanobacterial biofilms and numbering up, holds the potential to be applied as a flexible, carbon-neutral production platform for value-added compounds.     

A microfluidic gradient mixer-flow chamber as a new tool to study biofilm development under defined solute gradients

Understanding the dynamics of biofilm development in response to chemical cues and signals is required toward the development of controllable biofilm-mediated bioprocesses. In this study, we report a new biofilm growth system that integrates a microfluidic gradient mixer with a biofilm growth chamber. The biofilm growth system allows biofilms to grow under defined solute gradients and enables nondestructive monitoring of the biofilm development dynamics in response to the defined gradients. The solute gradients generated in the system were simulated and then validated experimentally. We then demonstrated the applicability of the biofilm growth system in studying biofilm development under defined solute gradients. Specifically, we examined biofilm development of Shewanella oneidensis and Comamonas testosteroni under a defined calcium and nitrate gradient, respectively. Using two C. testosteroni strains (WDL7 and I2), we further demonstrated the applicability of our biofilm growth system to study the development of coculture biofilms under a defined solute gradient. Our results show that the biofilm growth system we have developed here can be a promising tool to reveal the dynamics of biofilm development in response to chemical cues and signals as well as the interorganism interactions in coculture biofilms.     

Action of antimicrobial substances produced by different oil reservoir Bacillus strains against biofilm formation

Microbial colonization of petroleum industry systems takes place through the formation of biofilms, and can result in biodeterioration of the metal surfaces. In a previous study, two oil reservoir Bacillus strains (Bacillus licheniformis T6-5 and Bacillus firmus H₂O-1) were shown to produce antimicrobial substances (AMS) active against different Bacillus strains and a consortium of sulfate-reducing bacteria (SRB) on solid medium. However, neither their ability to form biofilms nor the effect of the AMS on biofilm formation was adequately addressed. Therefore, here, we report that three Bacillus strains (Bacillus pumilus LF4—used as an indicator strain, B. licheniformis T6-5, and B. firmus H₂O-1), and an oil reservoir SRB consortium (T6lab) were grown as biofilms on glass surfaces. The AMS produced by strains T6-5 and H₂O-1 prevented the formation of B. pumilus LF4 biofilm and also eliminated pre-established LF4 biofilm. In addition, the presence of AMS produced by H₂O-1 reduced the viability and attachment of the SRB consortium biofilm by an order of magnitude. Our results suggest that the AMS produced by Bacillus strains T6-5 and H₂O-1 may have a potential for pipeline-cleaning technologies to inhibit biofilm formation and consequently reduce biocorrosion.     

Influence of microbial interactions and EPS/polysaccharide composition on nutrient removal activity in biofilms formed by strains found in wastewater treatment systems

The study of biofilm function, structure and microbial interactions might help to improve our understanding of biofilm wastewater treatment processes. However, few reports specifically address the influence of interactions within multispecies biofilms on microbial activity and biofilm composition. Thus, the relationship between biofilm formation, denitrification activity, phosphorus removal and the composition of extracellular polymeric substances (EPS), exopolysaccharides and the bacterial community was investigated using biofilms of denitrifying and phosphorus removing strains Comamonas denitrificans 110, Brachymonas denitrificans B79, Aeromonas hydrophila L6 and Acinetobacter calcoaceticus ATCC23055. Denitrification activity within the biofilms generally increased with the amount of biofilm while phosphorus removal depended on bacterial growth rate. Synergistic effects of co-growth on denitrification (B. denitrificans B79 and A. hydrophila L6) and phosphorus removal (C. denitrificans 110 with either A. calcoaceticus or A. hydrophila L6) were observed. B. denitrificans B79 was highly affected by interspecies interactions with respect to biofilm formation, denitrification activity and EPS composition, while C. denitrificans 110 remained largely unaffected. In some of the dual and quadruple strain biofilms new exopolysaccharide monomers were detected which were not present in the pure strain samples.     

Integration of algae cultivation as biodiesel production feedstock with municipal wastewater treatment: strains screening and significance evaluation of environmental factors

The objectives of this study are to find the robust strains for the centrate cultivation system and to evaluate the effect of environmental factors including light intensity, light–dark cycle, and exogenous CO₂ concentration on biomass accumulation, wastewater nutrient removal and biodiesel production. The results showed that all 14 algae strains from the genus of Chlorella, Haematococcus, Scenedesmus, Chlamydomonas, and Chloroccum were able to grow on centrate. The highest net biomass accumulation (2.01 g/L) was observed with Chlorella kessleri followed by Chlorella protothecoides (1.31 g/L), and both of them were proved to be capable of mixotrophic growth when cultivated on centrate. Environmental factors had significant effect on algal biomass accumulation, wastewater nutrients removal and biodiesel production. Higher light intensity and exogenous CO₂ concentration with longer lighting period promote biomass accumulation, biodiesel production, as well as the removal of chemical oxygen demand and nitrogen, while, lower exogenous CO₂ concentration promotes phosphorus removal.     

The effect of harvesting on biomass production and nutrient removal in phototrophic biofilm reactors for effluent polishing

An increasing number of wastewater treatment plants require post-treatment to remove residual nitrogen and phosphorus. This study investigated various harvesting regimes that would achieve consistent low effluent concentrations of nitrogen and phosphorus in a phototrophic biofilm reactor. Experiments were performed in a vertical biofilm reactor under continuous artificial lighting and employing artificial wastewater. Under similar conditions, experiments were performed in near-horizontal flow lanes with biofilms of variable thickness. It was possible to maintain low nitrogen and phosphorus concentrations in the effluent of the vertical biofilm reactor by regularly harvesting half of the biofilm. The average areal biomass production rate achieved a 7 g dry weight m^?2 day^?1 for all different harvesting frequencies tested (every 2, 4, or 7 days), corresponding to the different biofilm thicknesses. Apparently, the biomass productivity is similar for a wide range of biofilm thicknesses. The biofilm could not be maintained for more than 2 weeks as, after this period, it spontaneously detached from the carrier material. Contrary to the expectations, the biomass production doubled when the biofilm thickness was increased from 130 μm to 2 mm. This increased production was explained by the lower density and looser structure of the 2 mm biofilm. It was concluded that, concerning biomass production and labor requirement, the optimum harvesting frequency is once per week.     

微藻生物柴油的现状与进展

微藻生物柴油能够解决目前使用植物原料发展生物柴油面临的耕地不足、气候变化对产量影响大和引起农作物价格上涨等突出问题。通过转基因技术培育“工程微藻”,繁衍能力高,生长周期短,比陆生植物产油高出几十倍,并且能用海水作为其天然培养基进行工业化生产。介绍了微藻生物柴油的优势,高脂质微藻选育,以及工程微藻研究与下游生产工艺的研究现状和进展。     

Presence of Extracellular DNA in the <Emphasis Type="Italic">Candida albicans</Emphasis> Biofilm Matrix and its Contribution to Biofilms

DNA has been described as a structural component of the extracellular matrix (ECM) in bacterial biofilms. In Candida albicans, there is a scarce knowledge concerning the contribution of extracellular DNA (eDNA) to biofilm matrix and overall structure. This work examined the presence and quantified the amount of eDNA in C. albicans biofilm ECM and the effect of DNase treatment and the addition of exogenous DNA on C. albicans biofilm development as indicators of a role for eDNA in biofilm development. We were able to detect the accumulation of eDNA in biofilm ECM extracted from C. albicans biofilms formed under conditions of flow, although the quantity of eDNA detected differed according to growth conditions, in particular with regards to the medium used to grow the biofilms. Experiments with C. albicans biofilms formed statically using a microtiter plate model indicated that the addition of exogenous DNA (>160 ng/ml) increases biofilm biomass and, conversely, DNase treatment (>0.03 mg/ml) decreases biofilm biomass at later time points of biofilm development. We present evidence for the role of eDNA in C. albicans biofilm structure and formation, consistent with eDNA being a key element of the ECM in mature C. albicans biofilms and playing a predominant role in biofilm structural integrity and maintenance.     

Biofilm growth kinetics and nutrient (N/P) adsorption in an urban lake using reclaimed water: A quantitative baseline for ecological health assessment

Reclaimed wastewater reuse represents an effective method for partial resolution of increasing urban water shortages; however, reclaimed water may be characterized by significant contaminant loading, potentially affecting receiving ecosystem (and potentially human) health. The current study examined biofilm growth and nutrient adsorption in Olympic Lake (Beijing), the largest artificial urban lake in the world supplied exclusively by reclaimed wastewater. Findings indicate that solid particulate, extracellular polymeric substance (EPS) and metal oxide (Al, Fe, Mn) constituent masses adhere to a bacterial growth curve during biofilm formation and growth. Peak values were observed after ≈30 days, arrived at dynamic stability after ≈50 days and were affected by growth matrix surface roughness. These findings may be used to inform biofilm cultivation times for future biomonitoring. Increased growth matrix surface roughness (10.0 μm) was associated with more rapid biofilm growth and therefore an increased sensitivity to ecological variation in reclaimed water. Reclaimed water was found to significantly inhibit biofilm nutrient adsorption when compared with a “natural water” background, with elevated levels of metal oxides (Al, Fe, and Mn) and EPS representing the key substances actively influencing biofilm nutrient adsorption in reclaimed water. Results from the current study may be used to provide a quantitative baseline for future studies seeking to assess ecosystem health via monitoring of biofilms in the presence of reclaimed water through an improved quantitative understanding of biofilm kinetics in these conditions.     

Effects of Carbon Source, Carbon Concentration, and Chlorination on Growth Related Parameters of Heterotrophic Biofilm Bacteria

Abstract To investigate growth of heterotrophic biofilm bacteria, a model biofilm reactor was developed to simulate a drinking water distribution system. Controlled addition of three different carbon sources (amino acids, carbohydrates, and humics) at three different concentrations (500, 1,000, and 2,000 ppb carbon) in the presence and absence of chlorine were used in separate experiments. An additional experiment was run with a 1:1:2 mixture of the above carbon sources. Biofilm and effluent total and culturable cells in addition to total and dissolved organic carbon were measured in order to estimate specific growth rates (SGRs), observed yields, population densities, and bacterial carbon production rates. Bacterial carbon production rates (μg C/L day) were extremely high in the control biofilm communities (range = 295–1,738). Both growth rate and yield decreased with increasing carbon concentrations. Therefore, biofilm growth rates were zero-order with respect to the carbon concentrations used in these experiments. There was no correlation between growth rate and carbon concentration, but there was a significant negative correlation between growth rate and biofilm cell density (r=−0.637, p= 0.001 control and r=−0.57, p= 0.021 chlorinated biofilms). Growth efficiency was highest at the lowest carbon concentration (range = 12–4.5%, amino acids and humics respectively). Doubling times ranged from 2.3–15.4 days in the control biofilms and 1–12.3 days in the chlorinated biofilms. Growth rates were significantly higher in the presence of chlorine for the carbohydrates, humics, and mixed carbon sources (p= 0.004, < 0.0005, 0.013, respectively). The concept of r/K selection theory was used to explain the results with respect to specific growth rates and yields. Humic removal by the biofilm bacteria (78% and 56% for the control and chlorinated biofilms, respectively) was higher than previously reported literature values for planktonic bacteria. A number of control experiments indicated that filtration of drinking water was as effective as chlorination in controlling bacterial biofilm growth. Received: 26 March 1999; Accepted: 3 August 1999; Online Publication: 15 February 2000     

Strain-specific colonization patterns and serum modulation of multi-species oral biofilm development

Periodontitis results from an ecological shift in the composition of subgingival biofilms. Subgingival community maturation is modulated by inter-organismal interactions and the relationship of communities with the host. In an effort to better understand this process, we evaluated biofilm formation, with oral commensal species, by three strains of the subgingivally prevalent microorganism Fusobacterium nucleatum and four strains of the periodontopathogen Porphyromonas gingivalis. We also tested the effect of serum, which resembles gingival exudates, on subgingival biofilms. Biofilms were allowed to develop in flow cells using salivary medium. We found that although not all strains of F. nucleatum were able to grow in mono-species biofilms, forming a community with health-associated partners Actinomyces oris and Veillonella parvula promoted biofilm growth of all F. nucleatum strains. Strains of P. gingivalis also showed variable ability to form mono-species biofilms. P. gingivalis W50 and W83 did not form biofilms, while ATCC 33277 and 381 formed biofilm structures, but only strain ATCC 33277 grew over time. Unlike the enhanced growth of F. nucleatum with the two health-associated species, no strain of P. gingivalis grew in three-species communities with A. oris and V. parvula. However, addition of F. nucleatum facilitated growth of P. gingivalis ATCC 33277 with health-associated partners. Importantly, serum negatively affected the adhesion of F. nucleatum, while it favored biofilm growth by P. gingivalis. This work highlights strain specificity in subgingival biofilm formation. Environmental factors such as serum alter the colonization patterns of oral microorganisms and could impact subgingival biofilms by selectively promoting pathogenic species.     

Molecular Identification and Biofilm-Forming Ability of Culturable Aquatic Bacteria In Microbial Biofilms Formed in Drinking Water Distribution Networks

Drinking water distribution networks are known to harbor microbial biofilms. The aim of the present work is to (i) identify the culturable bacteria presented in the drinking-water distribution network, (ii) investigate the ability of isolated bacteria to form biofilm under some environmental stress conditions and some eliminating or removing treatments. To achieve it, 57 strains were isolated from biofilm (43 isolates) and water samples (14 isolates) collected from five stations in drinking-water distribution network in Taif city, Kingdom of Saudi Arabia (KSA). Partial sequences of 16S rRNA gene in the 57 isolates ensured the presence of only 22 different strains in biofilm samples. Among these strains, only 14 strains were also detected in water samples. Gram-negative Aeromonas hydrophila was the most occurred bacterium in the microbial biofilm obtained from the purified-water storage tanks followed by Gram-negative Pseudomonas sp. Gram-positive Bacillus subtilis was the most occurred bacterium in the microbial biofilm collected from the ends of the distribution pipes. Among the 22 isolated strains, 13 strains were strong biofilm producers at 30 and 37°C. The effects of environmental stresses including nutrient starvation (diluted TSB, 20:1), heating (100°C for 10 min), UV-treatment (240 nm for 10 min) and dynamic incubation (150 rpm min^?1) on the formation of biofilm were also investigated. These conditions affected the biofilm formation ability of the isolated strains at different levels. Nutrient starvation enhanced biofilm formation by most of the isolates. Among some biofilm deforming treatments, SDS and trypsin had considerable effects on preventing biofilm formation by most of the isolated strains. In conclusion, the results of the present work indicated that not all biofilm strains released from biofilm to the drinking water. Also, not all biofilm strains were able to form biofilm. Most of isolated bacteria had ability to form biofilm at suboptimum temperature of growth. These results may provide basic information on formation of microbial biofilms and overcome the problem of deteriorating of water quality in the drinking-water distribution networks.     

Biofilm formation and proteolytic activities of Pseudoalteromonas bacteria that were isolated from fish farm sediments

In order to save natural resources and supply good fishes, it is important to improve fish‐farming techniques. The survival rate of fish fry appears to become higher when powders of foraminifer limestone are submerged at the bottom of fish‐farming fields, where bacterial biofilms often grow. The observations suggest that forming biofilms can benefit to keep health status of breeding fishes. We employed culture‐based methods for the identification and characterization of biofilm‐forming bacteria and assessed the application of their properties for fish farming. Fifteen bacterial strains were isolated from the biofilm samples collected from fish farm sediments. The 16S rRNA gene sequences indicated that these bacteria belonged to the genera, Pseudoalteromonas (seven strains), Vibrio (seven strains) and Halomonas (one strain). It was found that Pseudoalteromonas strains generally formed robust biofilms in a laboratory condition and produced extracellular proteases in a biofilm‐dependent manner. The results suggest that Pseudoalteromonas bacteria, living in the biofilm community, contribute in part to remove excess proteineous matters from the sediment sludge of fish farms.     

Sessile Legionella pneumophila is able to grow on surfaces and generate structured monospecies biofilms

Currently, models for studying Legionella pneumophila biofilm formation rely on multi-species biofilms with low reproducibility or on growth in rich medium, where planktonic growth is unavoidable. The present study describes a new medium adapted to the growth of L. pneumophila monospecies biofilms in vitro. A microplate model was used to test several media. After incubation for 6 days in a specific biofilm broth not supporting planktonic growth, biofilms consisted of 5.36 ± 0.40 log (cfu cm^?2) or 5.34 ± 0.33 log (gu cm^?2). The adhered population remained stable for up to 3 weeks after initial inoculation. In situ confocal microscope observations revealed a typical biofilm structure, comprising cell clusters ranging up to ～300 μm in height. This model is adapted to growing monospecies L. pneumophila biofilms that are structurally different from biofilms formed in a rich medium. High reproducibility and the absence of other microbial species make this model useful for studying genes involved in biofilm formation.     

Phosphorus Limitation of Heterotrophic Biofilms from the Fraser River, British Columbia, and the Effect of Pulp Mill Effluent

Abstract Experiments were conducted to determine the limiting nutrient and the effect of pulp mill effluent (PME) on heterotrophic biofilms in the Fraser River, a northern, temperate river in British Columbia, Canada. Biofilms were cultured by irrigating flow cells with Fraser River water alone (control), or river water amended with glucose; ammonium; phosphate; glucose, ammonium, and phosphate combined; or 3% PME. Phosphorus increased bacterial growth in the biofilm, which was rapidly transferred to protists, and reduced the amount of extracellular polymeric substances accumulated by biofilm bacteria. This work demonstrates phosphorus limitation of biofilm bacteria in a major river system and emphasizes the importance of nutrients in industrial discharges. Received: 7 October 1997; Accepted: 8 January 1998