Surface interaction forces of cellulose nanocrystals grafted with thermoresponsive polymer brushes

The colloidal stability and thermoresponsive behavior of poly(N-isopropylacrylamide) brushes grafted from cellulose nanocrystals (CNCs) of varying graft densities and molecular weights was investigated. Indication of the grafted polymer brushes was obtained after AFM imaging of CNCs adsorbed on silica. Also, aggregation of the nanoparticles carrying grafts of high degree of polymerization was observed. The responsiveness of grafted CNCs in aqueous dispersions and as an ultrathin film was evaluated by using light scattering, viscosimetry, and colloidal probe microscopy (CPM). Light transmittance measurements showed temperature-dependent aggregation originating from the different graft densities and molecular weights. The lower critical solution temperature (LCST) of grafted poly(NiPAAm) brushes was found to decrease with the ionic strength, as is the case for free poly(NiPAAm) in aqueous solution. Thermal responsive behavior of grafted CNCs in aqueous dispersions was observed by a sharp increase in dispersion viscosity as the temperature approached the LCST. CPM in liquid media for asymmetric systems consisting of ultrathin films of CNCs and a colloidal silica probe showed the distinctive effects of the grafted polymer brushes on interaction and adhesive forces. The origin of such forces was found to be mainly electrostatic and steric in the case of bare and grafted CNCs, respectively. A decrease in the onset of attractive and adhesion forces of grafted CNCs films were observed with the ionic strength of the aqueous solution. The decreased mobility of polymer brushes upon partial collapse and decreased availability of hydrogen bonding sites with higher electrolyte concentration were hypothesized as the main reasons for the less prominent polymer bridging between interacting surfaces.     

Temperature-responsive cell culture surfaces enable "on-off" affinity control between cell integrins and RGDS ligands

In this study, specific interactions between immobilized RGDS (Arg-Gly-Asp-Ser) cell adhesion peptides and cell integrin receptors located on cell membranes are controlled in vitro using stimuli-responsive polymer surface chemistry. Temperature-responsive poly(N-isopropylacrylamide-co-2-carboxyisopropylacrylamide) (P(IPAAm-co-CIPAAm)) copolymer grafted onto tissue culture grade polystyrene (TCPS) dishes permits RGDS immobilization. These surfaces facilitate the spreading of human umbilical vein endothelial cells (HUVECs) without serum depending on RGDS surface content at 37 degrees C (above the lower critical solution temperature, LCST, of the copolymer). Moreover, cells spread on RGDS-immobilized surfaces at 37 degrees C detach spontaneously by lowering culture temperature below the LCST as hydrated grafted copolymer chains dissociate immobilized RGDS from cell integrins. These cell lifting behaviors upon hydration are similar to results using soluble RGDS in culture as a competitive substitution for immobilized ligands. Binding of cell integrins to immobilized RGDS on cell culture substrates can be reversed spontaneously using mild environmental stimulation, such as temperature, without enzymatic or chemical treatment. These findings are important for control of specific interactions between proteins and cells, and subsequent "on-off" regulation of their function. Furthermore, the method allows serum-free cell culture and trypsin-free cell harvest, essentially removing mammalian-sourced components from the culture process.     

Effect of polymer brush architecture on antibiofouling properties

Polymer brushes show great promise in next-generation antibiofouling surfaces. Here, we have studied the influence of polymer brush architecture on protein resistance. By carefully optimizing reaction conditions, we were able to polymerize oligoglycerol-based brushes with sterically demanding linear or dendronized side chains on gold surfaces. Protein adsorption from serum and plasma was analyzed by surface plasmon resonance. Our findings reveal a pronounced dependence of biofouling on brush architecture. Bulky yet flexible side chains as in dendronized brushes provide an ideal environment to repel protein-possibly through formation of a hydration layer, which can be further enhanced by presenting free hydroxyl groups on the polymer brushes. A deeper understanding of how brush architecture influences protein resistance will ultimately enable fabrication of surface coatings tailored to specific requirements in biomedical applications.     

Graft copolymerization of glycerol 1,3-diglycerolate diacrylate onto poly(3-hydroxyoctanoate) to improve physical properties and biocompatibility

Glycerol 1,3-diglycerol diacrylate-grafted poly(3-hydroxyoctanoate) (GDD-g-PHO) copolymers were prepared by heating homogeneous solutions of PHO, GDD monomer and benzoylperoxide initiator. Experiments showed that GDD was successfully grafted onto the PHO chains and that the resulting copolymers had enhanced thermal properties and mechanical strengths. The surfaces and the bulk of GDD-g-PHO copolymers became more hydrophilic as the GDD grafting density in the copolymer increased. Measurements of the growth of Chinese hamster ovary cells and the adsorption of blood proteins and platelets in vitro showed that biocompatibility was also enhanced by grafting of GDD groups. These results indicate that the GDD-g-PHO copolymers are promising materials for biocompatible biomedical applications.     

RGD peptides grafting onto poly(ethylene terephthalate) with well controlled densities

The aim of this study was to graft RGD peptides with well controlled densities onto poly(ethylene terephthalate) (PET) film surfaces. Biomimetic modifications were performed by means of a four-step reaction procedure: surface modification in order to create -COOH groups onto polymer surface, coupling agent grafting and finally immobilization of peptides. The originality of this work is to evaluate several grafted densities peptides. Toluidine blue and high-resolution mu-imager (using [(3)H]-Lys) were used to evaluate densities. Moreover, mu-imager has exhibited the stability of peptides grafted onto the surface when treated under harsh conditions. Benefits of the as-proposed method were related to the different concentrations of peptides grafted onto the surface as well as the capacity of RGD peptide to interact with integrin receptors.     

Copolymerization of 2-carboxyisopropylacrylamide with N-isopropylacrylamide accelerates cell detachment from grafted surfaces by reducing temperature

Acrylic acid (AAc) has been utilized to introduce reactive carboxyl groups to a temperature-responsive polymer, poly(N-isopropylacrylamide) (PIPAAm). However, AAc introduction shifts the copolymer phase transition temperatures higher and dampens the steep homopolymer phase transition with increasing AAc content. We previously synthesized 2-carboxyisopropylacrylamide (CIPAAm) having both a similar side chain structure to IPAAm and a functional carboxylate group in order to overcome these shortcomings. In the present study, these copolymers, grafted onto cell culture plastic, were assessed for cell adhesion control using their phase transition. AAc introduction to PIPAAm-grafted surfaces resulted in excessive surface hydration and hindered cell spreading in culture at 37 degrees C. In contrast, CIPAAm-containing copolymer-grafted surfaces exhibited relatively weak hydrophobicity similar to both homopolymer PIPAAm-grafted surfaces as well as commercial ungrafted tissue culture polystyrene dish surfaces. Cells adhered and spread well on these surfaces at 37 degrees C in culture. As observed previously on PIPAAm-grafted surfaces, cells were spontaneously detached from the copolymer-grafted surfaces by reducing culture temperature. Cell detachment was accelerated on the CIPAAm copolymer-grafted surfaces compared to pure IPAAm surfaces, suggesting that hydrophilic carboxyl group microenvironment in the monomer and polymer is important to accelerate grafted surface hydration below the lower critical solution temperature, detaching cells.     

Well-defined lactose-containing polymer grafted onto silica particles

Reversible addition-fragmentation chain transfer (RAFT) polymerization of 2-O-meth-acryloyloxyethoxyl-(2,3,4,6-tetra-O-acetyl-beta-D-galactopyranosyl)-(1-4)-2,3,6-tri-O-acetyl-beta-D-glucopyranoside (MAEL) was performed directly in CHCl3 solutions using cumyl dithiobenzoate (CDB) as the chain transfer agent to give well-defined glycopolymers. The chemical composition and structure of the glycopolymer were characterized by 1HNMR, FTIR, and SEC. The living glycopolymer chains were subsequently grafted onto gamma-methacryloxypropyl-trimethoxy (MPTMS) modified silica particles. The acetyl groups of the poly(MAEL) grafted onto the silica gel particles were converted to the hydroxyl groups with CH3ONa/CH3OH, thus obtaining silica gel particles modified with well-defined lactose-carrying polymer.     

Hydrolases on silica surfaces: Coverage-activity–molecular property relationships revealed

A set of recommendations to maintain high activity of immobilized enzymes is developed based on direct observation via AFM. This helps to close knowledge gaps that often lead to poor performance of nanobiocatalysts for chemical synthesis. Molecule-level height and volume distribution analyses from high-resolution AFM images were applied to Candida antarctica Lipase B (CALB), subtilisin Carlsberg, and the Lipase from Thermomyces lanuginosus (TLL) deposited on model silica surfaces. Ensembles of flexible or “soft” enzymes appear separated when interactions with the surface are considerable at low surface coverage but form highly entangled structures of increased conformational stability at high surface coverage. By contrast, ensembles of rigid or “hard” enzymes appear to maintain stable aggregates even under strong interaction with the surface. The more rigid the enzyme the higher its tendency to remain in a densely packed state that is able to withstand surface-induced conformational transitions detrimental to catalysis. Weakening of surface-protein interactions for “soft” enzymes will prevent single-molecule immobilization, which reduces catalytic competency through structural changes. Multi-layer coverage in enzyme immobilization should generally be avoided due to mass transfer limitations.     

A neutron reflectivity study of polymer-modified phospholipid monolayers at the solid-solution interface: polyethylene glycol-lipids on silane-modified substrates.

The structure of polymer-decorated phospholipid monolayers at the solid-solution interface was investigated using neutron reflectometry. The monolayers were composed of distearoylphosphatidylethanolamine (DSPE) matrixed with varying amounts of DSPE-PEG (DSPE with polyethylene glycol covalently grafted to its headgroup). Mixed lipid monolayers were Langmuir-Blodgett deposited onto hydrophobic quartz or silicon substrates, previously hydrophobized by chemically grafting a robust monolayer of octadecyltrichlorosilane (OTS). We show that this method results in homogeneous and continuous phospholipid monolayers on the silanated substrates and determine that the grafted PEG chains extend away from the monolayers into the solvent phase as a function of their density, as expected from scaling theories. In addition, ligands were coupled to the end of the PEG chains and selective binding was demonstrated using fluorescence microscopy. Our results demonstrate that these constructs are ideal for further characterization and studies with well-defined monomolecular films.     

Polyelectrolyte brushes grafted from cellulose nanocrystals using Cu-mediated surface-initiated controlled radical polymerization

Herein we report the synthesis of cellulose nanocrystals (CNCs) grafted with poly(acrylic acid) (PAA) chains of different lengths using Cu-mediated surface initiated-controlled radical polymerization (SI-CRP). First, poly(tert-butylacrylate) (PtBA) brushes were synthesized; then, subsequent acid hydrolysis was used to furnish PAA brushes tethered onto the CNC surfaces. The CNCs were chemically modified to create initiator moieties on the CNC surfaces using chemical vapor deposition (CVD) and continued in solvent phase in DMF. A density of initiator groups of 4.6 bromine ester groups/nm(2) on the CNC surface was reached, suggesting a dense functionalization and a promising starting point for the controlled/living radical polymerization. The SI-CRP of tert-butylacrylate proceeded in a well-controlled manner with the aid of added sacrificial initiator, yielding polymer brushes with polydispersity values typically well below 1.12. We calculated the polymer brush grafting density to almost 0.3 chains/nm(2), corresponding to high grafting densities and dense polymer brush formation on the nanocrystals. Successful rapid acid hydrolysis to remove the tert-butyl groups yielded pH-responsive PAA-polyelectrolyte brushes bound to the CNC surface. Individually dispersed rod-like nanoparticles with brushes of PtBA or PAA were clearly visualized by AFM and TEM imaging.     

Biocompatibility and antimicrobial activity of poly(3-hydroxyoctanoate) grafted with vinylimidazole

Vinylimidazole-grafted poly(3-hydroxyoctanoate) (VI-g-PHO) copolymers were prepared by heating homogeneous solutions of PHO, VI monomer, and benzoylperoxide initiator. The Fourier transform infrared spectroscopy attenuated total reflection and electron spectroscopy for chemical analyses showed that VI was successfully grafted onto the PHO chains. The surfaces and the bulk of VI-g-PHO copolymers became more hydrophilic as the VI grafting density in the copolymer increased. Measurements of the growth of Chinese hamster ovary cells and the adsorption of blood proteins and platelets in vitro showed that biocompatibility was also enhanced by grafting of VI groups. Antimicrobial activity of the VI-g-PHO copolymers was studied against Escherichia coli, Staphylococcus aureus, and Candida albicans. Treatment of each culture suspension with 2.0% (w/v) copolymers for 12h resulted in >90% reduction in viable cell counts against all test microorganisms. These results indicate that the VI-g-PHO copolymers are promising materials for biomedical applications, as they exhibited both biocompatibility and broad spectrum antimicrobial activity.     

RGD-grafted poly-L-lysine-graft-(polyethylene glycol) copolymers block non-specific protein adsorption while promoting cell adhesion

A novel class of surface-active copolymers is described, designed to protect surfaces from nonspecific protein adsorption while still inducing specific cell attachment and spreading. A graft copolymer was synthesized, containing poly-(L-lysine) (PLL) as the backbone and substrate binding and poly(ethylene glycol) (PEG) as protein adsorption-resistant pendant side chains. A fraction of the grafted PEG was pendantly functionalized by covalent conjugation to the peptide motif RGD to induce cell binding. The graft copolymer spontaneously adsorbs from dilute aqueous solution onto negatively charged surfaces. The performance of RGD-modified PLL-g-PEG copolymers was analyzed in protein adsorption and cell culture assays. These coatings efficiently blocked the adsorption of serum proteins to Nb(2)O(5) and tissue culture polystyrene while specifically supporting attachment and spreading of human dermal fibroblasts. This surface functionalization technology is expected to be valuable in both the biomaterial and biosensor fields, because different signals can easily be combined, and sterilization and application are straightforward and cost-effective.     

Grafting of material-binding function into antibodies Functionalization by peptide grafting

Quite recently, a few antibodies against bulk material surface have been selected from a human repertoire antibody library, and they are attracting immense interest in the bottom-up integration of nanomaterials. Here, we constructed antibody fragments with binding affinity and specificity for nonbiological inorganic material surfaces by grafting material-binding peptides into loops of the complementarity determining region (CDR) of antibodies. Loops were replaced by peptides with affinity for zinc oxide and silver material surfaces. Selection of CDR loop for replacement was critical to the functionalization of the grafted fragments; the grafting of material-binding peptide into the CDR2 loop functionalized the antibody fragments with the same affinity and selectivity as the peptides used. Structural insight on the scaffold fragment used implies that material-binding peptide should be grafted onto the most exposed CDR loop on scaffold fragment. We show that the CDR-grafting technique leads to a build-up creation of the antibody with affinity for nonbiological materials.     

Patterned protein films on poly(lipid) bilayers by microcontact printing

The use of polymerized lipid bilayers as substrates for microcontact printing (muCP) of protein films was investigated. We have previously shown that vesicle fusion of bis-SorbPC, a dienoate lipid, on glass and silica substrates, followed by redox-initiated radical polymerization, produces a planar supported lipid bilayer (PSLB) that is ultrastable(1a) [Ross, E. E.; Rozanski, L. J.; Spratt, T.; Liu, S.; O'Brien, D. F.; Saavedra, S. S. Langmuir 2003, 19, 1752] and highly resistant to nonspecific adsorption of dissolved proteins [Ross, E. E.; Spratt, T.; Liu, S.; Rozanski, L. J.; O'Brien, D. F.; Saavedra, S. S. Langmuir 2003, 19, 1766].(1b) Here we demonstrate that muCP of bovine serum albumin (BSA) onto a dried poly(bis-SorbPC) PSLB from a poly(dimethylsiloxane) (PDMS) stamp produces a layer of strongly adsorbed protein, comparable in surface coverage to films printed on glass surfaces. Immobilization of proteins on poly(PSLB)s has potential applications in biosensing, and this work shows that direct muCP of proteins is a technically simple approach to create immobilized monolayers, as well as multilayers of different proteins.     

Multistep approach to control microbial fouling of historic building materials by aerial phototrophs

The scientific multistep approach described herein is a result of two years of research into a control method against microbial fouling and biodeterioration of historic building materials by phototrophs. A series of tests were conducted to select the best antifouling agent for eliminating ‘green’ coatings and protecting surfaces against biofouling. Of the seven active compounds, two with the best penetration abilities were subjected to a photosynthetic activity inhibition test using confocal microscopy. Of the two, a quaternary ammonium salt (QAC) – didecyldimethylammonium chloride (DDAC) – was found to be the most effective. Ten biocides containing QACs at different concentrations were then tested against ‘green’ coatings on wood, brick and plaster, with the best four being selected for further research in model conditions. As a result, biocides containing >14% (v v^–1) DDAC were found to be successful antifouling agents for protecting historical materials against biodeterioration by phototrophs.     

Model films from native cellulose nanofibrils. Preparation, swelling, and surface interactions

Native cellulose model films containing both amorphous and crystalline cellulose I regions were prepared by spin-coating aqueous cellulose nanofibril dispersions onto silica substrates. Nanofibrils from wood pulp with low and high charge density were used to prepare the model films. Because the low charged nanofibrils did not fully cover the silica substrates, an anchoring substance was selected to improve the coverage. The model surfaces were characterized using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The effect of nanofibril charge density, electrolyte concentration, and pH on swelling and surface interactions of the model film was studied by quartz crystal microbalance with dissipation (QCM-D) and AFM force measurements. The results showed that the best coverage for the low charged fibrils was achieved by using 3-aminopropyltrimethoxysilane (APTS) as an anchoring substance and hence it was chosen as the anchor. The AFM and XPS measurements showed that the fibrils are covering the substrates. Charge density of the fibrils affected the morphology of the model surfaces. The low charged fibrils formed a network structure while the highly charged fibrils formed denser film structure. The average thickness of the films corresponded to a monolayer of fibrils, and the average rms roughness of the films was 4 and 2 nm for the low and high charged nanofibril films, respectively. The model surfaces were stable in QCM-D swelling experiments, and the behavior of the nanofibril surfaces at different electrolyte concentrations and pHs correlated with other studies and the theories of Donnan. The AFM force measurements with the model surfaces showed well reproducible results, and the swelling results correlated with the swelling observed by QCM-D. Both steric and electrostatic forces were observed and the influence of steric forces increased as the films were swelling due to changes in pH and electrolyte concentration. These films differ from previous model cellulose films due to their chemical composition (crystalline cellulose I and amorphous regions) and fibrillar structure and hence serve as excellent models for the pulp fiber surface.     

Titanium Surface Priming with Phase-Transited Lysozyme to Establish a Silver Nanoparticle-Loaded Chitosan/Hyaluronic Acid Antibacterial Multilayer via Layer-by-Layer Self-Assembly

Objectives

The formation of biofilm around implants, which is induced by immediate bacterial colonization after installation, is the primary cause of post-operation infection. Initial surface modification is usually required to incorporate antibacterial agents on titanium (Ti) surfaces to inhibit biofilm formation. However, simple and effective priming methods are still lacking for the development of an initial functional layer as a base for subsequent coatings on titanium surfaces. The purpose of our work was to establish a novel initial layer on Ti surfaces using phase-transited lysozyme (PTL), on which multilayer coatings can incorporate silver nanoparticles (AgNP) using chitosan (CS) and hyaluronic acid (HA) via a layer-by-layer (LbL) self-assembly technique.

Methods

In this study, the surfaces of Ti substrates were primed by dipping into a mixture of lysozyme and tris(2-carboxyethyl)phosphine (TCEP) to obtain PTL-functionalized Ti substrates. The subsequent alternating coatings of HA and chitosan loaded with AgNP onto the precursor layer of PTL were carried out via LbL self-assembly to construct multilayer coatings on Ti substrates.

Results

The results of SEM and XPS indicated that the necklace-like PTL and self-assembled multilayer were successfully immobilized on the Ti substrates. The multilayer coatings loaded with AgNP can kill planktonic and adherent bacteria to 100% during the first 4 days. The antibacterial efficacy of the samples against planktonic and adherent bacteria achieved 65%-90% after 14 days. The sustained release of Ag over 14 days can prevent bacterial invasion until mucosa healing. Although the AgNP-containing structure showed some cytotoxicity, the toxicity can be reduced by controlling the Ag release rate and concentration.

Conclusions

The PTL priming method provides a promising strategy for fabricating long-term antibacterial multilayer coatings on titanium surfaces via the LbL self-assembly technique, which is effective in preventing implant-associated infections in the early stage.     

Murine macrophage behavior on peptide-grafted polyethyleneglycol-containing networks

Polyethyleneglycol-based networks were employed as substrates to graft bioactive peptides to study macrophage interactions with materials. Our overall objective was to utilize biologically active factors to stimulate certain macrophage function on materials suitable for implantation in connective tissues. In this study, we sought to explore the bioactivity of several peptides derived from extracellular matrix adhesion proteins and macrophage-active proteins that are normally soluble. The candidate peptides examined corresponded to residues 63 to 77 of complement component C3a (C3a(63-77)), residues 178 to 207 of interleukin-1 beta (IL1beta(178-207)), residues 1615 to 1624 of fibronectin (FN(1615-1624)), endothelial-macrophage activating polypeptide II, complement component C5a inhibitory sequence, macrophage inhibitory peptide, and YRGDG; materials lacking peptides were used as negative controls. An established murine cell-line IC-21 was employed as a macrophage model, and human dermal fibroblasts were used for comparison. Our results showed that the substrates without grafted peptides were free from artifactual cell adhesion associated with the adsorption of serum or cellularly secreted proteins for long duration of culture. Of all grafted samples, IL1beta(178-207)- and C3a(63-77)-grafted surfaces supported higher adherent macrophage densities. C3a(63-77)- and FN(1615-1624)-grafted surfaces supported higher adherent fibroblast densities. From competitive inhibition studies, cell adhesion was determined to occur in a receptor-peptide specific manner. The presence of grafted YRGDG in addition to IL1beta(178-207), C3a(63-77), or FN(1615-1624) synergistically increased macrophage and fibroblast adhesion. Materials grafted with IL1beta(178-207) or C3a(63-77) co-grafted with or without YRGDG did not support the formation of multinucleated giant cells from the fusion of adherent macrophages in vitro.     

Inhibition de l'adhérence de Porphyromonas gingivalis sur la surface de titane greffé de poly(styrène sulfonate de sodium)

Dental implant-associated infections as peri-implantitis represent one of the major causes of osteointegration failures of oral implants. Adhesion of Porphyromonas gingivalis, one of the bacterial strains mainly involved in such infections, is tightly dependent on the topographical and/or physico-chemical properties of the implant surfaces. As a matter of fact, we showed that the grafting of one bioactive polymer such as poly(sodium styrene sulfonate) onto titanium implant surfaces allowed a sensitive decrease of Staphylococcus aureus adhesion (> 40%). The aim of the study consists in evaluating the adhesion of P. gingivalis onto titanium surfaces grafted with poly(sodium stryrene sulfonate) in order to elaborate implants exhibiting appropriate inhibiting properties towards the adhesion of periodontal pathogens. The grafting of poly(sodium stryrene sulfonate) onto titanium surfaces is carried out in two steps: chemical oxydation of titanium to initiate radical species then grafting of poly(sodium stryrene sulfonate) by radical polymerization. Chemical characterization of the surfaces is achieved by Fourier transformed infrared spectroscopy (FTIR). Bacterial adhesion was studied on grafted and non grafted (control) titanium surfaces, preadsorbed or not by plasmatic proteins. Protein adsorption as well as bacteria adhesion is followed by fluorescence spectroscopy by using proteins or bacteria previously labelled with fluorescence probes; the quantification of adsorption and bacteria adhesion are performed by image analysis. Results showed that protein adsorption is more important (~3 times) and that P. gingivalis adhesion is strongly inhibited (~73%) onto poly(sodium styrene sulfonate) grafted surfaces when compared to titanium control. Moreover, the inhibition of bacterial adhesion on grafted surfaces preadsorbed with plasma proteins is comparable to that observed on grafted surfaces preadsorbed with fibronectin. In conclusion, the obtained results evidenced that the grafting of titanium surface by poly(sodium styrene sulfonate) led to significant inhibition of P. gingivalis adhesion and that this inhibitory activity involved adsorbed proteins. Poly(sodium styrene sulfonate) grafted titanium surfaces present a high interest for the elaboration of oral implants in various clinical dental applications.     

The effective photocatalysis and antibacterial properties of AgBr/Ag2MoO4@ZnO composites under visible light irradiation

A bio-inspired durable anti-biofilm coating was developed for industrial stainless steel (SS) surfaces. Two polymers inspired from the adhesive and cross-linking properties of mussels were designed and assembled from aqueous solutions onto SS surfaces to afford durable coatings. Trypsin, a commercially available broad spectrum serine protease, was grafted as the final active layer of the coating. Its proteolytic activity after long immersion periods was demonstrated against several substrata, viz. a synthetic molecule, N-α-benzoyl-DL-arginine-p-nitroanilide hydrochloride (BAPNA), a protein, FTC-casein, and Gram-positive biofilm forming bacterium Staphylococcus epidermidis.