Metal Removal from Contaminated Soils Through Bioleaching with Oxidizing Bacteria and Rhamnolipid Biosurfactants

The use of surfactants as a method for solubilization and removal of heavy metal contamination from soil has been reported before. Biosurfactants produced by some microorganisms are able to modify the surface of various metals and aggregate on interphases favoring the metal separation process from contaminated environments. We evaluated the feasibility of enhancing the removal of metal ions from mineral waste/contaminated soils using alternate cycles of treatment with rhamnolipid biosurfactants and bioleaching with a mixed bacterial culture of Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans. Bioleaching alone removed 50% Zn and 19% Fe. When rhamnolipids were used at low concentration (0.4 mg/mL), 11% Fe and 25% Zn were removed, while at 1 mg/mL 19% Fe and 52% Zn removal were achieved. When using a cyclic treatment combining bioleaching and biosurfactants, metal removal reached up to 36% for Fe and 63% to 70% for Zn.     

Pulsed Electrokinetic Removal of Chromium,Mercury and Cadmium from Contaminated Mixed Clay Soils

Electrokinetic remediation (EKR) processes are energy intense systems as they are mainly run under continuous constant current supply mode. In this study, pulsed electrokinetic remediation (PEKR) technique was employed for the removal of Cd, Hg and Cr from mixed contaminated natural clay and bentonite soils. The effects of voltage gradient, pulse duty cycle and bentonite/clay ratio on the simultaneous removal efficiencies of the heavy metals and specific energy consumption were investigated. Fifteen (15) PEKR experiments were conducted according to Box–Behnken design (BBD) with each experiment allowed to continuously run for 21 days. Increase in the proportion of the bentonite significantly decreased the removal efficiency of the heavy metals while having insignificant effect on the energy consumption. Conversely, increase in both voltage gradient and pulse duty cycle increased the heavy metals removal efficiencies, though at the expense of increase in energy consumption due to combine effects of increase in the soil electrical conductivity, amount of current needed to sustain the applied voltage gradient as well as the raise in the soil pH. The maximum achievable removal efficiencies for Cd, Hg and Cr were 21.87, 78.06 and 89.64% respectively. The specific energy consumption significantly increased from the range of 91.67–154.17 kwh/m³ to 1700–2441.67 kwh/m³ as a result of combined effect of increasing voltage gradient and pulse duty cycle. This demonstrated that effective PEKR could be achieved with significance reduction in the energy consumption via appropriate selection of pulse duty and voltage gradient for clay soils of different proportion of montmorillonite.     

Washing of Cadmium(II) from a Contaminated Soil Column

The washing of cadmium (from CdO_(s)) from a soil column employing either an acid solution or EDTA (a strong metal chelator) was examined. For Cd(II) levels of 50 to 1000 mg/kg, the fraction removed was essentially independent of the initial Cd(II) concentration. The most efficient washing of cadmium was achieved using an acid wash solution at pH 2.5. Lower Cd(II) removals were found at lower pH, apparently due to inhibition of CdO_(s) dissolution by constituents released from the soil under highly acidic conditions. EDTA wash solutions were employed at EDTA:cadmium molar ratios ranging from 1:1 to 10:1. Up to 90% removal of total Cd(II) was achieved at the 10:1 ratio after the passage of the first 50?PV of wash solution. Although higher chelate levels enhanced Cd(II) removal, the utilization efficiency of EDTA for cadmium decreased.     

Phytoextraction Potential of Poplar (Populus alba L. var. pyramidalis Bunge) from Calcareous Agricultural Soils Contaminated by Cadmium

To investigate the phytoextraction potential of Populus alba L. var. pyramidalis Bunge for cadmium (Cd) contaminated calcareous soils, a concentration gradient experiment and a field sampling experiment (involving poplars of different ages) were conducted. The translocation factors for all experiments and treatments were greater than 1. The bioconcentration factor decreased from 2.37 to 0.25 with increasing soil Cd concentration in the concentration gradient experiment and generally decreased with stand age under field conditions. The Cd concentrations in P. pyramidalis organs decreased in the order of leaves > stems > roots. The shoot biomass production in the concentration gradient experiment was not significantly reduced with soil Cd concentrations up to or slightly over 50 mg kg^–1. The results show that the phytoextraction efficiency of P. pyramidalis depends on both the soil Cd concentration and the tree age. Populus pyramidalis is most suitable for remediation of slightly Cd contaminated calcareous soils through the combined harvest of stems and leaves under actual field conditions.     

Kinetics of Cr(VI) Removal by Iron Filings in Some Soils

In this research, kinetics of Cr(VI) reduction by iron filings was investigated through a batch study in seven different soils. Chromate reduction experiments were carried out for initial Cr(VI) concentrations ranging from 20 to 100 mgkg^?1 and iron filings dosage of 0 to 5% w/w. The experimental data were analyzed using various kinetic models including zero-order, pseudo first-order, power function, Elovich, and diffusion parabolic. Results showed that the Cr(VI) reduction efficiency in the presence of all studied soils increased with increasing iron filings dosage and decreased with increasing the initial Cr(VI) concentration. The reaction rates considerably depended on pH and were higher in acidic soils. The diffusion parabolic model was the best kinetic model as evidenced by the highest determination coefficient (r²) and the lowest standard error of the estimate (SE). The rate-limiting step(s) may be transport of chromate anions across a liquid film at the interface of soil-liquid, transport in liquid-filled macropores of iron filings aggregates, or diffusion in micropores and along the particle's surface.     

Cadmium removal from contaminated soil by thermally responsive elastin (ELPEC20) biopolymers

Cadmium contamination of soil is a major concern in the biosphere. Beyond the suite of available physico-chemical treatment methods, green and more efficient technologies are desired to reduce cadmium and other heavy metal contaminants to acceptable levels. Elastin-like polypeptides (ELP) composed of a polyhistidine domain (ELPH12) can be used as an environmentally benign chelating agent for ex situ soil washing. However, ELPH12 is relatively non-selective. A biopolymer with metal-binding domains that have stronger affinity, capacity, and selectivity would have distinct advantages. The aim of this work is to investigate the use of a new generation of ELP biopolymer, ELPEC20, containing synthetic phytochelatin (EC) as the metal-binding domain for ex situ soil washing. ELPEC20 was shown to bind cadmium more effectively and selectively than ELPH12. The binding constant of ELPEC20 is an order of magnitude higher and the binding capacity is fivefold higher than ELPH12. In contrast to ELPH12, no decrease in cadmium binding was observed in the presence of other competing metal ions. The improved selectivity and binding capacity provided by ELPEC20 were directly reflected in the enhanced cadmium extraction efficiency from contaminated soil. In batch washing studies up to 62% of the bound cadmium was removed by ELPEC20 while less than 12% was removed by ELPH12. Cadmium was removed not only from the exchangeable fraction but also the oxidizable fraction. The high-affinity binding sites of ELPEC20 also results in very rapid extraction with complete removal achieved within 1 h, suggesting that ELPEC20 could be used as part of a rapid (short retention time) technology with minimum possibility for the biodegradation of biopolymers.     

Novel Hyper Antimony-Oxidizing Bacteria Isolated from Contaminated Mine Soils in China

Antimony (Sb)-oxidizing bacteria play an important role in environmental Sb bioremediation because of their ability to convert the more toxic Sb(III) to the less toxic Sb(V). So far, the information about the Sb(III)-oxidizing bacteria species is still limited. In this study, three highly Sb(III)-resistant bacterial strains were isolated from contaminated mine soils after aerobic enrichment culturing with Sb(III) (1 mM). The morphological, biochemical, and 16S rRNA gene sequencing analysis suggested that the three novel bacterial isolates fell within Cupriavidus, Moraxella, and Bacillus, respectively. Among the strains, Moraxella sp. S2 isolated from soils with the highest Sb content exhibited the highest minimum inhibitory concentration for Sb(III) but the lowest Sb(III) oxidation efficiency, which could not completely oxidize 50 μM Sb(III) in 15 days. Cupriavidus sp. S1 was able to oxidize 50 μM Sb(III) completely in 12 days, but could not oxidize 100 μM Sb(III) even with extended time of incubation, while Bacillus sp. S3 with the lowest resistance to Sb(III) could aerobically oxidize 100 µM Sb(III) within 2 days, showing high Sb(III) oxidation efficiency. Our research demonstrated that indigenous microorganisms associated with Sb mine soils were capable of Sb oxidation, and the novel bacteria isolated could represent good candidates for Sb remediation in heavily polluted sites.     

Carbon-13 nuclear magnetic resonance spectroscopy of high-spin iron(III) prophyrin compounds

¹³C nuclear magnetic resonance spectra have been obtained for variety of high-spin iron(III) porphyrin compounds and corresponding μ-oxo-bridged dimeric species. Large hyperfine shifts and significant line broadening are observed. The monomeric exhibit hyperfine shifts which are downfield with te exception of an upfield shift for the meso-carbon atom. Possible unpaired spin delocalization mechanisms and prospects for observing ¹³C NMR porphyrin resonances in high-spin ferrihemoproteins are discussed. Spectra reported here provide strategy for incorporation of ¹³C labels in hemoproteins either by biosynthetic or chemical means. The vinyl-CH₂ resonances of iron(III) protoporphyrin IX located 260 parts per million downfield from tetramethylsilane are especially attractive from the standpoint of chemical labeling.     

Thallium(III) chloride in organic solvents: Synthesis, solutions and solvates. The crystal structures of trichlorobis(dimethylsulfoxide)thallium(III) and tribromobis(dimethylsulfoxide)thallium(III)

The synthesis of thallium(III) chloride and bromide was performed in solution by chlorination and bromination, respectively, of the suspensions of the corresponding thallium(I) halides in acetonitrile. Crystalline compounds TlX₃(CH₃CN)₂ (X = Cl⁻, Br⁻) were prepared from the acetonitrile solutions. Thallium(III) chloride and bromide in dimethylsulfoxide solution were obtained by dissolving the corresponding solid compounds TlX₃(CH₃CN)₂ (Cl⁻, Br⁻) in DMSO. Both acetonitrile and dimethylsulfoxide solutions of thallium(III) chloride were studied by UV-Vis and ²⁰⁵Tl NMR spectroscopy. The UV-Vis study of the TlCl₃-CH₃CN system showed presence of at least two thallium(III) chloride species. Only one signal arising from the thallium(III) species was, however, detected by the ²⁰⁵Tl NMR in the solution because of the fast chemical exchange. The ²⁰⁵Tl NMR study of thallium(III) chloride in dimethylsulfoxide showed three separate signals assigned to the solvated , TlCl₃ and species. The crystalline compounds of trichlorobis(dimethylsulfoxide)thallium(III) and tribromobis(dimethylsulfoxide)thallium(III) were prepared and their crystal structures were solved by single-crystal X-ray analysis. The thallium atom in the complexes has a trigonal bipyramidal environment built by three halide ions occupying equatorial positions of the polyhedron and two oxygen atoms of the DMSO molecules in the apical positions.     

The Removal of Pb and Cd from Heavily Contaminated Soil in Kayseri,Turkey by a Combined Process of Soil Washing and Electrodeposition

In this study, a combined system of soil washing and electrodeposition was designed to remove Pb (16381±643 mg/kg) and Cd (34347±1310 mg/kg) from contaminated soil. 0.05 M Na₂EDTA was used as a chelating agent for the remediation of soil, taken from the nearby city Kayseri, Turkey. As a result of the batch extraction tests, maximum removals were determined as; at the 20:1 liquid: soil ratio for Pb is 60.7%, for Cd at the 30:1 liquid: soil ratio is 67.4%. An electrochemical treatment was applied to the waste washing solution which appeared to be the second pollutant after the Na₂EDTA extraction from the soil. With extraction tests of Pb and Cd, being transformed from the solid phase to the liquid phase. The electrochemical treatment (electrodeposition), performed in three different potential (6 V, 8 V and 10 V) and maximum removal efficiencies, were found 99.7% and 80.3% at 10 V for Pb and Cd, respectively.

Speciation tests (BCR) were carried out, both before and after the soil washing process, to evaluate the redistribution of metal fraction in the soil. The fraction, associated with the organic substance, was found as 10.67% for Pb and 1.81% for Cd. The metal bioavailability factor increased after soil washing, which indicates that EDTA could enhance the mobility of Pb and Cd.     

Iron(III) hydroxamate transport of Escherichia coli: restoration of iron supply by coexpression of the N- and C-terminal halves of the cytoplasmic membrane protein FhuB cloned on separate plasmids

Summary Transport of iron(III) hydroxamates across the inner membrane into the cytoplasm of Escherichia coli cells is mediated by the FhuC, FhuD and FhuB proteins. We studied the extremely hydrophobic FhuB protein (70 kDa) which is located in the cytoplasmic membrane. The N- and C-terminal halves of the protein [FhuB(N) and FhuB(C)] show homology to each other and to the equivalent polypeptides involved in uptake of ferric dicitrate and of vitamin B₂. Various plasmids carrying only one-half of the fhuB gene were expressed in fhuB ^– mutants. Only combinations of FhuB(N) and FhuB(C) polypeptides restored sensitivity to albomycin and growth on iron hydroxamates as sole iron source; no activity was obtained with either half of FhuB alone. These results indicate that both halves of FhuB are essential for substrate translocation and that they combine to form an active permease when expressed separately. In addition, a FhuB derivative with a large internal duplication of 271 amino acids was found to be partially active in transport, indicating that the extra portion did not perurb proper insertion of the active FhuB segments into the cytoplasmic membrane.     

Removal of Lead from a Calcareous Soil by Chloride Complexation

Remediation of a lead-contaminated calcareous soil using NaCl solutions was examined. The removal of Pb from a coarser fraction of the soil was found to be 83% after three successive extractions at a NaCl concentration of 8?M, whereas an average of 9% of the calcium was removed. Multibatch extractions of Pb from finer soil containing a higher level of Pb were also performed. The removal of Pb from this soil after six successive extractions with 8?M NaCl was found to be 93%. The removal of Pb increased with time in a batch test and approached 80% after 90?h. It was found that the data were adequately described by a first-order rate, and hence it is believed that a single reaction mechanism controlled the release of Pb (i.e., from carbonate bound or exchangeable Pb fractions in the soil). Increasing removal of Pb was found as the volume of water added was increased as the mass of NaCl in solution remained constant. The removal of Pb from the leachate was found to be 90%, 99.7%, and 35% with lime (25.20?g/L), sodium carbonate (4.48?g/L), and calcium carbonate (82.0?g/L) addition, respectively. In the case of sodium carbonate, the removal of Pb was further improved when the pH was adjusted to 8.2. The recycling of free chloride that was generated from leachate resulted in 91% removal of Pb from the soil (particle size < 4.75?mm) after six recycles.     

Iron (III) Stimulation of Lipid Hydroperoxide-Dependent Lipid Peroxidation

In an experimental system where both Fe²⁺ autoxidation and generation of reactive oxygen species is negligible, the effect of FeCl₂ and FeCl₃ on the peroxidation of phosphatidylcholine (PC) liposomes containing different amounts of lipid hydroperoxides (LOOH) was studied; Fe²⁺ oxidation, oxygen consumption and oxidation index of the liposomes were measured. No peroxidation was observed at variable FeCl₂/FeCl₃ ratio when PC liposomes deprived of LOOH by triphenyl-phosphine treatment were utilized. By contrast, LOOH containing liposomes were peroxidized by FeCl₂. The FeCl₂ concentration at which Fe²⁺ oxidation was maximal, defined as critical Fe²⁺ concentration [Fe²⁺]*, depended on the LOOH concentration and not on the amount of PC liposomes in the assay. The LOOH-dependent lipid peroxidation was stimulated by FeCl₃, addition; the oxidized form of the metal increased the average length of radical chains, shifted to higher values the [Fe²⁺]* and shortened the latent period. The iron chelator KSCN exerted effects opposite to those exerted by FeCl₃ addition. The experimental data obtained indicate that the kinetics of LOOH-dependent lipid peroxidation depends on the Fe²⁺/Fe³⁺ ratio at each moment during the time course of lipid peroxidation. The results confirm that exogenously added FeCl₃ does not affect the LOOH-independent but the LOOH-deendent lipid peroxidation; and suggest that the Feg, endogenously generated exerts a major role in the control of the LOOH-dependent lipid peroxidation.     

Iron (III) Stimulation of Lipid Hydroperoxide-Dependent Lipid Peroxidation

In an experimental system where both Fe²⁺ autoxidation and generation of reactive oxygen species is negligible, the effect of FeCl₂ and FeCl₃ on the peroxidation of phosphatidylcholine (PC) liposomes containing different amounts of lipid hydroperoxides (LOOH) was studied; Fe²⁺ oxidation, oxygen consumption and oxidation index of the liposomes were measured. No peroxidation was observed at variable FeCl₂/FeCl₃ ratio when PC liposomes deprived of LOOH by triphenyl-phosphine treatment were utilized. By contrast, LOOH containing liposomes were peroxidized by FeCl₂. The FeCl₂ concentration at which Fe²⁺ oxidation was maximal, defined as critical Fe²⁺ concentration [Fe²⁺]*, depended on the LOOH concentration and not on the amount of PC liposomes in the assay. The LOOH-dependent lipid peroxidation was stimulated by FeCl₃, addition; the oxidized form of the metal increased the average length of radical chains, shifted to higher values the [Fe²⁺]* and shortened the latent period. The iron chelator KSCN exerted effects opposite to those exerted by FeCl₃ addition. The experimental data obtained indicate that the kinetics of LOOH-dependent lipid peroxidation depends on the Fe²⁺/Fe³⁺ ratio at each moment during the time course of lipid peroxidation. The results confirm that exogenously added FeCl₃ does not affect the LOOH-independent but the LOOH-deendent lipid peroxidation; and suggest that the Feg, endogenously generated exerts a major role in the control of the LOOH-dependent lipid peroxidation.     

Comparison of Extractants for Removing Heavy Metals from Contaminated Clayey Soils

This article describes the removal of heavy metals from contaminated clayey soils by soil washing using various extractants. Two clayey soils, kaolin, a low buffering soil with pH of 5, and glacial till, a high buffering soil with pH of 8, were used to represent various soil conditions. These soils were spiked with chromium (Cr), nickel (Ni), and cadmium (Cd) to simulate improper disposal of typical electroplating waste constituents. The following extracting solutions were investigated for the removal of heavy metals from the soils: deionized water, distilled water, and tap water; acetic acid and phosphoric acid; chelating agents ethylenediaminetetraacetic acid (EDTA) and citric acid; and the oxidizing agents potassium permanganate and hydrogen peroxide. The effect of extractant concentration on removal of heavy metals was also investigated. Complete removal of Cr was achieved using 0.1?M potassium permanganate for kaolin, while a maximum of 54% was removed from glacial till. A maximum Ni removal of 80% was achieved using tapwater for kaolin, while a maximum removal of 48 to 52% was achieved using either 1?M acetic acid or 0.1?M citric acid for glacial till. A maximum Cd removal of 50% was achieved using any of the extractants for kaolin, while a maximum removal of 45 to 48% was obtained using either acids or chelating agents for glacial till. Overall, this study showed that complete removal of Cr, Ni, and Cd from clayey soils is difficult to achieve using the soil-washing process, and also the use of one extractant may not be effective in removing all metals. A sequential extraction using different extractants may be needed for the removal of multiple metal contaminants from clayey soils.     

A mild and convenient indium(III) chloride-catalyzed synthesis of thioglycosides

The efficiency of glycosidation reactions generally involves a high chemical yield, as well as high/complete stereo- and regioselectivity. All these depend on the compatibility of the reactivity of glycosyl donors and acceptors. Among glycosyl donors, thioglycosides are widely used because of their high degree of stability in many organic reactions. Although there are number of methods available for the preparation of thioglycosides, all of them have one or more disadvantages, especially concerning the time factor and cumbersome workup procedures. Here we report a convenient and high-yielding method for the preparation of thioglycosides.     

Thermodynamics of stabilization of RNA pseudoknots by cobalt(III) hexaammine

Equilibrium unfolding (folding) studies reveal that the autoregulatory RNA pseudoknots derived from the bacteriophage T2 and T4 gene 32 mRNAs exhibit significant stabilization by increasing concentrations of divalent metal ions in solution. In this report, the apparent affinities of exchange inert trivalent Co(NH₃) have been determined, relative to divalent Mg²⁺, for the folded, partially folded (K_f), and fully unfolded (K_u) conformations of these molecules. A general nonspecific, delocalized ion binding model was developed and applied to the analysis of the metal ion concentration dependence of individual two‐state unfolding transitions. Trivalent Co(NH₃) was found to associate with the fully folded and partially unfolded pseudoknotted forms of these RNAs with a K_f of 5–8 × 10⁴ M⁻¹ in a background of 0.10 M K⁺, or 3‐ to 5‐fold larger than the K_f obtained for two model RNA hairpins and hairpin unfolding intermediates, and ≈ 40–50‐fold larger than K_f for Mg²⁺. The magnitude of K_f was found to be strongly dependent on the monovalent salt concentration in a manner qualitatively consistent with polyelectrolyte theory, with K_f reaching 1.2 × 10⁵ M⁻¹ in 50 mM K⁺. Two RNA hairpins were found to have affinities for Co(NH₃) and Ru(NH₃) of 1–2 ×10⁴ M⁻¹, or ≈ 15‐fold larger than the K_f of ∼ 1000 M⁻¹ observed for Mg²⁺. Additionally, the K_u of 4,800 M⁻¹ for the trivalent ligands is ≈ 8‐fold larger than the K_u of 600 M⁻¹ observed for Mg²⁺. These findings suggest that the T2 and T4 gene 32 mRNA pseudoknots possess a site(s) for Mg²⁺ and Co(NH₃) binding of significantly higher affinity than a “duplexlike” delocalized ion binding site that is strongly linked to the thermodynamic stability of these molecules. Imino proton perturbation nmr spectroscopy suggests that this site(s) lies near the base of the pseudoknot stem S2, near a patch of high negative electrostatic potential associated with the region where the single loop L1 adenosine crosses the major groove of stem S2. © 1999 John Wiley & Sons, Inc. Biopoly 50: 443–458, 1999     

Differential effects of Co(III), Ni(II), and Ru(III) amine complexes on Sindbis virus

Transition metal complexes [Co(cyclen)(NH₃)₂](ClO₄)₃⋅H₂O (cyclen = 1,4,7,10-tetraazacyclododecane) (2), [Co(NH₃)₅(OH₂)](CF₃SO₃)₃ (3) [Ni(NH₃)₆]Br₂ (4) and [Ru(NH₃)₆]Cl₃ (5) were tested against Sindbis infected baby hamster kidney (BHK) cells and show differential effects from the previously reported anti-viral complex [Co(NH₃)₆]Cl₃ (1). The macrocyclic complex 2 and labile aqua complex 3 show either no or little effect on the survival on Sindbis virus-infected cells as compared to that for 1, which show a monotonic increase in % BHK cell survival. Nickel and ruthenium ammine complexes 4 and 5 had a moderate influence of cell survival. While the results showed some anti-viral activity for some of the structural variations, it appears that 1, with its potential to be a broad-spectrum anti-viral compound, occupies a unique position in its ability to both significantly enhance cell survival and to decrease viral expression of infected cells. We also show that 1 also shows anti-viral activity against Adenovirus lending support to the broad-spectrum potential of this complex.     

Iron(III) and nickel(II) complexes of tetradentate thiosemicarbazones: Synthesis,structure, cytotoxicity,and lipophilicity

Eighteen of the iron(III) and nickel(II) complexes with tetradentate thiosemicarbazidato ligands were synthesized and described, by analytical and spectroscopic methods. Two complexes as an example to the iron and nickel centered ones were crystallographically analyzed to confirm the molecular structures. Cytotoxic effects of the complexes on K562 chronic myeloid leukemia cells were determined by 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay. For comparison, human umbilical vein endothelial cells (HUVECs) was used as a noncancerous cell line. While four of the iron(III) complexes exhibited the antileukemic effect with 50% inhibition of cell growth (IC₅₀) values in the 3.4 to 6.9 μg/mL range on K562 cell line, the nickel(II) complexes showed no significant effect on both cell lines. The complexes Fe4, Fe5, and Fe6, bearing 4‐methoxy substituent exhibited relatively high antiproliferative activity on both cell lines. Complex Fe3 with 3‐methoxy and S‐allyl groups exhibited a selectivity between K562 and HUVEC cells by IC₅₀ values of 6.9 and >10 μg/mL, respectively. Lipophilicity, a key parameter for bioavailability and oral administration, was found in the range of ?0.3 and +1.3 that desired for drug active ingredients. The results were discussed in the context of a structure‐activity relationship.     

Fe(III)的微生物异化还原

异化Fe(III)还原微生物是厌氧环境中广泛存在的一类主要微生物类群,它们的共同特征是可以利用Fe(III)作为末端电子受体而获能。异化Fe(III)还原微生物具有强大的代谢功能,可还原许多有毒重金属包括一些放射性核素,还可降解利用许多有机污染物,在污染环境的生物修复中具有重要的应用价值。本文对异化Fe(III)还原微生物的分布、分类,代谢功能多样性以及异化Fe(III)还原的意义做了评述,旨在加强相关领域的研究人员对此的了解和重视,通过学科的交叉和合作加快我国在这一领域的研究。