A facile PCR method for detecting replication mode of lactococcial plasmids

A rapid and accurate method was developed for detecting replication type of plasmids of Lactococci. Two specific PCR primer sets were designed for rep gene of Lactococci, one (RC1-RCr1) is derived from the RC-type plasmid, pWV01 and the other (J1-Jr1) is derived from the theta-type plasmid, pVS40. The two primer sets could be used to differentiate the RC-type (pWV01) and the theta-type (pWV02, 03, 04, and 05) replication in Lactococcus lactis subsp. cremoris Wg2 and CCRC10791.     

Effect of Plasmid Incompatibility on DNA Transfer to Streptococcus cremoris

Several Streptococcus cremoris strains were used in protoplast transformation and interspecific protoplast fusion experiments with Streptococcus lactis and Bacillus subtilis, with pGKV110, pGKV21, and ΔpAMβ1 as the marker plasmids. ΔpAMβ1 is a 15.9-kilobase nonconjugative, deletion derivative of pAMβ1, which is considerably larger than the pGKV plasmids (approximately 4.5 kilobases). In general, ΔpAMβ1 was transferred more efficiently than the pGKV plasmids. Using electroporation, we were able to demonstrate that failure of efficient transfer for the pGKV plasmids was, except for one case, caused by incompatibility of these plasmids with resident plasmids of the recipient strain.     

Conjugal Transfer of Broad-Host-Range Plasmid pAMβ1 into Enteric Species of Lactic Acid Bacteria

The broad-host-range plasmid pAMβ1, which codes for erythromycin and lincomycin resistance, was transferred by conjugation into Lactobacillus acidophilus, Lactobacillus reuteri, and Lactobacillus salivarius. A novel 17-megadalton plasmid molecule was detected in the transconjugants, confirming the introduction of pAMβ1 into each species.     

Production of Recombinant α-Galactosidases in Thermus thermophilus

A Thermus thermophilus selector strain for production of thermostable and thermoactive α-galactosidase was constructed. For this purpose, the native α-galactosidase gene (agaT) of T. thermophilus TH125 was inactivated to prevent background activity. In our first attempt, insertional mutagenesis of agaT by using a cassette carrying a kanamycin resistance gene led to bacterial inability to utilize melibiose (α-galactoside) and galactose as sole carbohydrate sources due to a polar effect of the insertional inactivation. A Gal⁺ phenotype was assumed to be essential for growth on melibiose. In a Gal⁻ background, accumulation of galactose or its metabolite derivatives produced from melibiose hydrolysis could interfere with the growth of the host strain harboring recombinant α-galactosidase. Moreover, the AgaT⁻ strain had to be Km^s for establishment of the plasmids containing α-galactosidase genes and the kanamycin resistance marker. Therefore, a suitable selector strain (AgaT⁻ Gal⁺ Km^s) was generated by applying integration mutagenesis in combination with phenotypic selection. To produce heterologous α-galactosidase in T. thermophilus, the isogenes agaA and agaB of Bacillus stearothermophilus KVE36 were cloned into an Escherichia coli-Thermus shuttle vector. The region containing the E. coli plasmid sequence (pUC-derived vector) was deleted before transformation of T. thermophilus with the recombinant plasmids. As a result, transformation efficiency and plasmid stability were improved. However, growth on minimal agar medium containing melibiose was achieved only following random selection of the clones carrying a plasmid-based mutation that had promoted a higher copy number and greater stability of the plasmid.     

Conjugative Plasmids of Neisseria gonorrhoeae

Many clinical isolates of the human pathogen Neisseria gonorrhoeae contain conjugative plasmids. The host range of these plasmids is limited to Neisseria species, but presence of a tetracycline (tetM) determinant inserted in several of these plasmids is an important cause of the rapid spread of tetracycline resistance. Previously plasmids with different backbones (Dutch and American type backbones) and with and without different tetM determinants (Dutch and American type tetM determinants) have been identified. Within the isolates tested, all plasmids with American or Dutch type tetM determinants contained a Dutch type plasmid backbone. This demonstrated that tetM determinants should not be used to differentiate between conjugal plasmid backbones. The nucleotide sequences of conjugative plasmids with Dutch type plasmid backbones either not containing the tetM determinant (pEP5233) or containing Dutch (pEP5289) or American (pEP5050) type tetM determinants were determined. Analysis of the backbone sequences showed that they belong to a novel IncP1 subfamily divergent from the IncP1α, β, γ, δ and ε subfamilies. The tetM determinants were inserted in a genetic load region found in all these plasmids. Insertion was accompanied by the insertion of a gene with an unknown function, and rearrangement of a toxin/antitoxin gene cluster. The genetic load region contains two toxin/antitoxins of the Zeta/Epsilon toxin/antitoxin family previously only found in Gram positive organisms and the virulence associated protein D of the VapD/VapX toxin/antitoxin family. Remarkably, presence of VapX of pJD1, a small cryptic neisserial plasmid, in the acceptor strain strongly increased the conjugation efficiency, suggesting that it functions as an antitoxin for the conjugative plasmid. The presence of the toxin and antitoxin on different plasmids might explain why the host range of this IncP1 plasmid is limited to Neisseria species. The isolated plasmids conjugated efficiently between N. gonorrhoeae strains, but did not enhance transfer of a genetic marker.     

Genetic and physical characterization of recombinant plasmids associated with cell aggregation and high-frequency conjugal transfer in Streptococcus lactis ML3.

Restriction mapping was employed to characterize the 104-kilobase (kb) cointegrate lactose plasmids from 15 independent transconjugants derived from Streptococcus lactis ML3 as well as the 55-kb lactose plasmid ( pSK08 ) and a previously uncharacterized 48.4-kb plasmid ( pRS01 ) from S. lactis ML3. The data revealed that the 104-kb plasmids were cointegrates of pSK08 and pRS01 and were structurally distinct. The replicon fusion event occurred within adjacent 13.8- or 7.3-kb PvuII fragments of pSK08 and interrupted apparently random regions of pRS01 . Correlation of the transconjugants' clumping and conjugal transfer capabilities with the interrupted region of pRS01 identified pRS01 regions coding for these properties. In the 104-kb plasmids, the pRS01 region was present in both orientations with respect to the pSK08 region. The replicon fusion occurred in recombination-deficient (Rec-) strains and appeared to introduce a 0.8 to 1.0-kb segment of DNA within the junction fragments. The degeneration of the cointegrate plasmids was monitored by examining the lactose plasmids from nonclumping derivatives of clumping transconjugants. These plasmids displayed either precise or imprecise excision of pRS01 sequences or had dramatically reduced copy numbers. Both alterations occurred by rec-independent mechanisms. Alterations of a transconjugant 's clumping phenotype also occurred by rec-independent inversion of a 4.3-kb KpnI-PvuII fragment within the pRS01 sequences of the cointegrate plasmid.     

Construction of compatible wide-host-range shuttle vectors for lactic acid bacteria and Escherichia coli

A new collection of shuttle cloning vectors has been constructed that can be used in a broad host range, because they carry replication origins which are functional in Escherichia coli (p15A, pWV01, ColE1), Lactococcus lactis, lactobacilli, and Bacillus subtilis (pAMbeta1, pWV01). These plasmids contain the lacZ-T1T2 cassette from pJDC9, which allows the X-gal selection and cloning of DNA fragments that could cause plasmid instability in E. coli. In addition, they have been proved to be structurally and segregationally stable in Lactobacillus casei, in which their copy number has been determined by real-time quantitative PCR. Furthermore, the antibiotic resistance markers (beta-lactamase, chloramphenicol acetyl transferase, and erythromycin transacetylase) and the theta and rolling circle replicating origins have been combined to obtain this set of compatible plasmids (pIA family) that can be cotransformed, both in lactic acid bacteria and in E. coli.     

Control of Plasmid R1 Replication: Functions Involved in Replication, Copy Number Control, Incompatibility, and Switch-off of Replication

A small derivative of plasmid R1 was used to integratively suppress a chromosomal dnaA(Ts) mutation. The strain obtained grew normally at 42°C. The integratively suppressed strain was used as recipient for various plasmid R1 derivatives. Plasmid R1 and miniplasmid derivatives of R1 could be established in the strain that carried an integrated R1 replicon, but they were rapidly lost during growth. However, plasmids also carrying ColE1 replication functions were almost completely stably inherited. The integratively suppressed strain therefore allows the establishment of bacteria diploid with respect to plasmid R1 and forms a useful and sensitive system for studies of interaction between plasmid R1 replication functions. Several of the chimeric plasmids caused inhibition of growth at high temperatures. All plasmids that inhibited growth carried one particular PstI fragment from plasmid R1 (the PstI F fragment), and in all cases the growth inhibition could be ascribed to repression of initiation of chromosome replication at 42°C, i.e., they carry a trans-acting switch-off function. Furthermore, the analogous PstI fragments from different copy mutants of plasmid R1 were analyzed similarly, and one mutant was found to lack the switch-off function. The different chimeric plasmids were also tested for their incompatibility properties. All plasmids that carried the switch-off function (and no other plasmids) also carried R1 incompatibility gene(s). Since the PstI F fragment, which is present on all these plasmids, is very small (0.35 × 10⁶), it is suggested that the switch-off regulation of replication (by an inhibitor), incompatibility, and copy number control are governed by the same gene.     

Increased Abundance of IncP-1β Plasmids and Mercury Resistance Genes in Mercury-Polluted River Sediments: First Discovery of IncP-1β Plasmids with a Complex mer Transposon as the Sole Accessory Element

Although it is generally assumed that mobile genetic elements facilitate the adaptation of microbial communities to environmental stresses, environmental data supporting this assumption are rare. In this study, river sediment samples taken from two mercury-polluted (A and B) and two nonpolluted or less-polluted (C and D) areas of the river Nura (Kazakhstan) were analyzed by PCR for the presence and abundance of mercury resistance genes and of broad-host-range plasmids. PCR-based detection revealed that mercury pollution corresponded to an increased abundance of mercury resistance genes and of IncP-1β replicon-specific sequences detected in total community DNA. The isolation of IncP-1β plasmids from contaminated sediments was attempted in order to determine whether they carry mercury resistance genes and thus contribute to an adaptation of bacterial populations to Hg pollution. We failed to detect IncP-1β plasmids in the genomic DNA of the cultured Hg-resistant bacterial isolates. However, without selection for mercury resistance, three different IncP-1β plasmids (pTP6, pTP7, and pTP8) were captured directly from contaminated sediment slurry in Cupriavidus necator JMP228 based on their ability to mobilize the IncQ plasmid pIE723. These plasmids hybridized with the merRTΔP probe and conferred Hg resistance to their host. A broad host range and high stability under conditions of nonselective growth were observed for pTP6 and pTP7. The full sequence of plasmid pTP6 was determined and revealed a backbone almost identical to that of the IncP-1β plasmids R751 and pB8. However, this is the first example of an IncP-1β plasmid which had acquired only a mercury resistance transposon but no antibiotic resistance or biodegradation genes. This transposon carries a rather complex set of mer genes and is inserted between Tra1 and Tra2.     

Plasmid pTB913 derivatives are segregationally stable in Bacillus subtilis at elevated temperatures.

We studied the effects of temperature on the segregational stability of derivatives of the rolling-circle-type plasmid pTB913 in Bacillus subtilis. This 4.5-kb plasmid is a deletion derivative of pTB19, which was originally isolated from a thermophilic Bacillus. pTB913 derivatives carrying large inserts or lacking the minus origin for complementary strand synthesis were segregationally unstable at 37 degrees C. In contrast, at 47 degrees C all pTB913 derivatives tested were stably maintained in B. subtilis. The increased stability at 47 degrees C was attributed, at least partly, to increased copy numbers at this temperature. Although considerable amounts of single-stranded and high-molecular-weight plasmid DNA were formed at 47 degrees C, these products did not reduce plasmid stability at this temperature. The increased stability and increased copy number of pTB913 at elevated temperatures extend the use of this plasmid as a cloning vector in B. subtilis and other bacilli.     

Expression of Ti-plasmid DNA in E. coli: Comparison of homologous fragments cloned from Ti plasmids of Agrobacterium strains C58 and Ach5

Fragments of two Ti plasmids from Agrobacterium tumefaciens were cloned and studied for cross-hybridization. Homologous fragments were further investigated for areas of strong homology and mapped with various restriction enzymes. The fragments were inserted in two directions and the recombinant plasmid was brought into E. coli strains producing minicells. About five proteins were found to be coded by those fragments of the Ti plasmids.     

Factors That Affect Transfer of the IncI1 β-Lactam Resistance Plasmid pESBL-283 between E. coli Strains

The spread of antibiotic resistant bacteria worldwide presents a major health threat to human health care that results in therapy failure and increasing costs. The transfer of resistance conferring plasmids by conjugation is a major route by which resistance genes disseminate at the intra- and interspecies level. High similarities between resistance genes identified in foodborne and hospital-acquired pathogens suggest transmission of resistance conferring and transferrable mobile elements through the food chain, either as part of intact strains, or through transfer of plasmids from foodborne to human strains. To study the factors that affect the rate of plasmid transfer, the transmission of an extended-spectrum β-lactamase (ESBL) plasmid from a foodborne Escherichia coli strain to the β-lactam sensitive E. coli MG1655 strain was documented as a function of simulated environmental factors. The foodborne E. coli isolate used as donor carried a CTX-M-1 harboring IncI1 plasmid that confers resistance to β-lactam antibiotics. Cell density, energy availability and growth rate were identified as factors that affect plasmid transfer efficiency. Transfer rates were highest in the absence of the antibiotic, with almost every acceptor cell picking up the plasmid. Raising the antibiotic concentrations above the minimum inhibitory concentration (MIC) resulted in reduced transfer rates, but also selected for the plasmid carrying donor and recombinant strains. Based on the mutational pattern of transconjugant cells, a common mechanism is proposed which compensates for fitness costs due to plasmid carriage by reducing other cell functions. Reducing potential fitness costs due to maintenance and expression of the plasmid could contribute to persistence of resistance genes in the environment even without antibiotic pressure. Taken together, the results identify factors that drive the spread and persistence of resistance conferring plasmids in natural isolates and shows how these can contribute to transmission of resistance genes through the food chain.     

Cloning Should Be Simple: Escherichia coli DH5α-Mediated Assembly of Multiple DNA Fragments with Short End Homologies

Numerous DNA assembly technologies exist for generating plasmids for biological studies. Many procedures require complex in vitro or in vivo assembly reactions followed by plasmid propagation in recombination-impaired Escherichia coli strains such as DH5α, which are optimal for stable amplification of the DNA materials. Here we show that despite its utility as a cloning strain, DH5α retains sufficient recombinase activity to assemble up to six double-stranded DNA fragments ranging in size from 150 bp to at least 7 kb into plasmids in vivo. This process also requires surprisingly small amounts of DNA, potentially obviating the need for upstream assembly processes associated with most common applications of DNA assembly. We demonstrate the application of this process in cloning of various DNA fragments including synthetic genes, preparation of knockout constructs, and incorporation of guide RNA sequences in constructs for clustered regularly interspaced short palindromic repeats (CRISPR) genome editing. This consolidated process for assembly and amplification in a widely available strain of E. coli may enable productivity gain across disciplines involving recombinant DNA work.     

Use of FabV-Triclosan Plasmid Selection System for Efficient Expression and Production of Recombinant Proteins in Escherichia coli

Maintenance of recombinant plasmid vectors in host bacteria relies on the presence of selection antibiotics in the growth media to suppress plasmid -free segregants. However, presence of antibiotic resistance genes and antibiotics themselves is not acceptable in several applications of biotechnology. Previously, we have shown that FabV-Triclosan selection system can be used to select high and medium copy number plasmid vectors in E. coli. Here, we have extended our previous work and demonstrated that expression vectors containing FabV can be used efficiently to express heterologous recombinant proteins in similar or better amounts in E. coli host when compared with expression vectors containing β-lactamase. Use of small amount of non-antibiotic Triclosan as selection agent in growth medium, enhanced plasmid stability, applicability in various culture media, and compatibility with other selection systems for multiple plasmid maintenance are noteworthy features of FabV-Triclosan selection system.     

A system to generate chromosomal mutations in Lactococcus lactis which allows fast analysis of targeted genes.

A system for generating chromosomal insertions in lactococci is described. It is based on the conditional replication of lactococcal pWV01-derived Ori+ RepA- vector pORI19, containing lacZ alpha and the multiple cloning site of pUC19. Chromosomal AluI fragments of Lactococcus lactis were cloned in pORI19 in RepA+ helper strain Escherichia coli EC101. The frequency of Campbell-type recombinants, following introduction of this plasmid bank into L. lactis (RepA-), was increased by combining the system with temperature-sensitive pWV01 derivative pVE6007. Transformation of L. lactis MG1363 (pVE6007) with the pORI19 bank of lactococcal chromosomal fragments at the permissive temperature allowed replication of several copies of a recombinant plasmid from the bank within a cell because of the provision in trans of RepA-Ts from pVE6007. A temperature shift to 37 degrees C resulted in loss of pVE6007 and integration of the pORI19 derivatives at high frequencies. A bank of lactococcal mutants was made in this way and successfully screened for the presence of two mutations: one in the monocistronic 1.3-kb peptidoglycan hydrolase gene (acmA) and one in the hitherto uncharacterized maltose fermentation pathway. Reintroduction of pVE6007 into the Mal- mutant at 30 degrees C resulted in excision of the integrated plasmid and restoration of the ability of ferment maltose. The integration plasmid (pMAL) was rescued by using the isolated plasmid content of a restored Mal+ colony to transform E. coli EC101. Nucleotide sequencing of the 564-bp chromosomal fragment in pMAL revealed an internal part of an open reading frame of which the translated product showed significant homology with ATP-binding proteins MalK of E. coli, Salmonella typhimurium, and Enterobacter aerogenes and MsmK of Streptococcus mutans. This combined use of two types of conditional replicating pWV01-derived vectors represents a novel, powerful tool for chromosomal gene inactivation, targeting, cloning, and sequencing of the labelled gene.     

Comparative Biology of Two Natural Variants of the IncQ-2 Family Plasmids,pRAS3.1 and pRAS3.2

Plasmids pRAS3.1 and pRAS3.2 are two closely related, natural variants of the IncQ-2 plasmid family that have identical plasmid backbones except for two differences. Plasmid pRAS3.1 has five 6-bp repeat sequences in the promoter region of the mobB gene and four 22-bp iterons in its oriV region, whereas pRAS3.2 has only four 6-bp repeats and three 22-bp iterons. Plasmid pRAS3.1 was found to have a higher copy number than pRAS3.2, and we show that the extra 6-bp repeat results in an increase in mobB and downstream mobA/repB expression. Placement of repB (primase) behind an arabinose-inducible promoter in trans resulted in an increase in repB expression and an approximately twofold increase in the copy number of plasmids with identical numbers of 22-bp iterons. The pRAS3 plasmids were shown to have a previously unrecognized toxin-antitoxin plasmid stability module within their replicons. The ability of the pRAS3 plasmids to mobilize the oriT regions of two other plasmids of the IncQ-2 family, pTF-FC2 and pTC-F14, suggested that the mobilization proteins pRAS3 are relaxed and can mobilize oriT regions with substantially different sequences. Plasmids pRAS3.1 and pRAS3.2 were highly incompatible with plasmids pTF-FC2 and pTC-F14, and this incompatibility was removed on inactivation of an open reading frame situated downstream of the mobCDE mobilization genes rather than being due to the 22-bp oriV-associated iterons. We propose that the pRAS3 plasmids represent a third, γ incompatibility group within the IncQ-2 family plasmids.Plasmids of the IncQ family are small (<20 kb), have a broad host range, and are highly promiscuous due to their ability to be mobilized very efficiently by self-transmissible plasmids such as the IncP plasmids. They have been divided into two families, IncQ-1 and IncQ-2, based on the amino acid sequence relatedness of their RepA (helicase), RepB (primase), and RepC (DNA-binding) replication proteins and because the mobilization proteins of the two families are unrelated, consisting of three or five genes, respectively (31). IncQ-1 group plasmids include RSF1010 and the near-identical R1162, pDN1, pIE1107, pIE1115, and pIE1130, while IncQ-2 plasmids include pTF-FC2, pTC-F14, and pRAS3.IncQ-2 plasmids pRAS3.1 and pRAS3.2 were isolated in Norway from the fish pathogens Aeromonas salmonicida subsp. salmonicida and atypical A. salmonicida, respectively, while investigating plasmids that conferred resistance to tetracycline (21). The two plasmids encode identical replication and mobilization proteins, with the most important differences in the plasmid backbone being that pRAS3.1 has four 22-bp iterons in its oriV region and five 6-bp repeat sequences upstream of its mobB gene, whereas pRAS3.2 has only three iterons and four 6-bp repeat sequences. No biological studies were carried out in the initial report of the pRAS3 plasmids. As a contribution to our studies on the evolution of IncQ plasmids, our longer-term aim is to address the question of why two natural versions of the plasmid exist. Here we report on the major differences in the biology of the two plasmids. In addition, we discovered the presence of repC and mobB genes that were not detected when the sequence of pRAS3 plasmids was previously reported. We also discovered a putative toxin-antitoxin (TA) postsegregational system different from that found in other members of the IncQ plasmids and tested it for functionality.The IncQ-1 plasmids are subdivided into incompatibility groups α, β, and γ, (31), whereas the IncQ-2 plasmids are subdivided into two incompatibility groups, α and β (14). In this work we also report on the incompatibility between the pRAS3 plasmids and other members of the IncQ-2 plasmid family as well as the IncQ-1 family plasmids. Furthermore, we compare the functional relatedness of the pRAS3 mobilization system with that of previously studied IncQ-2 plasmids.     

Cloning and expression of a Streptococcus cremoris proteinase in Bacillus subtilis and Streptococcus lactis

Previously, curing experiments suggested that plasmid pWV05 (17.5 megadaltons [Md]) of Streptococcus cremoris Wg2 specifies proteolytic activity. A restriction enzyme map of pWV05 was constructed, the entire plasmid was subcloned in Escherichia coli with plasmids pBR329 and pACYC184. A 4.3-Md HindIII fragment could not be cloned in an uninterrupted way in E. coli but could be cloned in two parts. Both fragments showed homology with the 9-Md proteinase plasmid of S. cremoris HP. The 4.3-Md HindIII fragment was successfully cloned in Bacillus subtilis on plasmid pGKV2 (3.1 Md). Crossed immunoelectrophoresis of extracts of B. subtilis carrying the recombinant plasmid (pGKV500; 7.4 Md) showed that the fragment specifies two proteins of the proteolytic system of S. cremoris Wg2. PGKV500 was introduced in a proteinase-deficient Streptococcus lactis strain via protoplast transformation. Both proteins were also present in cell-free extracts of S. lactis(pGKV500). In S. lactis, pGKV500 enables the cells to grow normally in milk with rapid acid production, indicating that the 4.3-Md HindIII fragment of plasmid pWV05 specifies the proteolytic activity of S. cremoris Wg2.     

Isolation and Characterization of a Rolling-Circle-Type Plasmid from Rhodococcus erythropolis and Application of the Plasmid to Multiple-Recombinant-Protein Expression

We isolated, sequenced, and characterized the cryptic plasmid pRE8424 from Rhodococcus erythropolis DSM8424. Plasmid pRE8424 is a 5,987-bp circular plasmid; it carries six open reading frames and also contains cis-acting elements, specifically a single-stranded origin and a double-stranded origin, which are characteristic of rolling-circle-replication plasmids. Experiments with pRE8424 derivatives carrying a mutated single-stranded origin sequence showed that single-stranded DNA intermediates accumulated in the cells because of inefficient conversion from single-stranded DNA to double-stranded DNA. This result indicates that pRE8424 belongs to the pIJ101/pJV1 family of rolling-circle-replication plasmids. Expression vectors that are functional in several Rhodococcus species were constructed by use of the replication origin from pRE8424. We previously reported a cryptic plasmid, pRE2895, from R. erythropolis, which may replicate by a θ-type mechanism, like ColE2 plasmids. The new expression vectors originating from pRE8424 were compatible with those derived from pRE2895. Coexpression experiments with these compatible expression vectors indicated that the plasmids are suitable for the simultaneous expression of multiple recombinant proteins.     

Cloning and expression of a Streptococcus cremoris proteinase in Bacillus subtilis and Streptococcus lactis.

Previously, curing experiments suggested that plasmid pWV05 (17.5 megadaltons [Md]) of Streptococcus cremoris Wg2 specifies proteolytic activity. A restriction enzyme map of pWV05 was constructed, the entire plasmid was subcloned in Escherichia coli with plasmids pBR329 and pACYC184. A 4.3-Md HindIII fragment could not be cloned in an uninterrupted way in E. coli but could be cloned in two parts. Both fragments showed homology with the 9-Md proteinase plasmid of S. cremoris HP. The 4.3-Md HindIII fragment was successfully cloned in Bacillus subtilis on plasmid pGKV2 (3.1 Md). Crossed immunoelectrophoresis of extracts of B. subtilis carrying the recombinant plasmid (pGKV500; 7.4 Md) showed that the fragment specifies two proteins of the proteolytic system of S. cremoris Wg2. PGKV500 was introduced in a proteinase-deficient Streptococcus lactis strain via protoplast transformation. Both proteins were also present in cell-free extracts of S. lactis(pGKV500). In S. lactis, pGKV500 enables the cells to grow normally in milk with rapid acid production, indicating that the 4.3-Md HindIII fragment of plasmid pWV05 specifies the proteolytic activity of S. cremoris Wg2.