Cyanophycin granule polypeptide formation and degradation in the cyanobacterium Aphanocapsa 6308.

The effect of a number of conditions on the amount of cyanophycin granule polypeptide [multi-L-arginyl poly(L-aspartic acid)] formed in the unicellular cyanobacterium Aphanocapsa 6308 was determined. Light, CO2, sulfur, and phosphorus starvation as well as the addition of arginine to culture media increased the amount of cyanophycin granule polypeptide in cells when compared with that in cells grown under conditions optimal for growth. Nitrogen limitation and reduction of growth temperature to 30 degrees C decreased the amount of cyanophycin granule polypeptide on a dry-weight basis. Shift-up and shift-down experiments suggest cyanophycin granule polypeptide may be a reserve nitrogen polymer in Aphanocapsa 6308.     

Assessments of growth conditions on the production of cyanophycin by recombinant Escherichia coli strains expressing cyanophycin synthetase gene

The synthesis of cyanophycin, a biodegradable polymer, is directed by cyanophycin synthetase. Polymerase chain reaction (PCR) cloned the gene cphA coding for cyanophycin synthetase from Synechocystis sp. PCC 6803 into pET-21b followed by transformation into two Escherichia coli hosts. The culture conditions for cyanophycin production were investigated, and the molecular weight and compositions of purified cyanophycin were analyzed. The results showed that E. coli BL21-CodonPlus(DE3)-RIL could produce 120 mg cyanophycin per gram dry cell weight in terrific medium. The purified cyanophycin consisted of insoluble and soluble forms at pH 7. The insoluble form had a higher molecular weight (20-32 kDa) than the soluble form (14-25 kDa). Both forms are composed of three major amino acids, aspartic acid, arginine, and lysine, and the insoluble form showed a higher arginine/lysine molar ratio (4.61 ± 0.31) than the soluble form (0.89 ± 0.05). In addition, the nitrogen sources could affect the yields of insoluble and soluble forms of cyanophycin. The medium containing additional lysine could enhance the proportion of the soluble form, but had little effect on the lysine and arginine percentages of both soluble and insoluble forms. The medium containing additional arginine slightly decreased the proportion of soluble form and altered its amino acid composition, with a minimal effect on the lysine and arginine percentages in the insoluble form.     

Biosynthesis of the cyanobacterial reserve polymer multi-L-arginyl-poly-L-aspartic acid (cyanophycin): mechanism of the cyanophycin synthetase reaction studied with synthetic primers.

Biosynthesis of the cyanobacterial nitrogen reserve cyanophycin (multi-L-arginyl-poly-L-aspartic acid) is catalysed by cyanophycin synthetase, an enzyme that consists of a single kind of polypeptide. Efficient synthesis of the polymer requires ATP, the constituent amino acids aspartic acid and arginine, and a primer like cyanophycin. Using synthetic peptide primers, the course of the biosynthetic reaction was studied. The following results were obtained: (a) sequence analysis suggests that cyanophycin synthetase has two ATP-binding sites and hence probably two active sites; (b) the enzyme catalyses the formation of cyanophycin-like polymers of 25-30 kDa apparent molecular mass in vitro; (c) primers are elongated at their C-terminus; (d) the constituent amino acids are incorporated stepwise, in the order aspartic acid followed by arginine, into the growing polymer. A mechanism for the cyanophycin synthetase reaction is proposed; (e) the specificity of the enzyme for its amino-acid substrates was also studied. Glutamic acid cannot replace aspartic acid as the acidic amino acid, whereas lysine can replace arginine but is incorporated into cyanophycin at a much lower rate.     

NMR study of the metabolic 15N isotopic enrichment of cyanophycin synthesized by the cyanobacterium Synechocystis sp. strain PCC 6308

1H, 13C and 15N nuclear magnetic resonance (NMR) spectroscopy has been used to characterize cyanophycin, a multi-l-arginyl-poly-[l-aspartic acid] polypeptide from the cyanobacterium Synechocystis sp. strain PCC 6308. 1H, 13C and 15N chemical shifts and 1JHN and 1JCN coupling constants were measured in isolated 15N-labeled cyanophycin, and showed chemical shift values and J-couplings consistent with the reported polypeptide structure. 15N enrichment levels were determined from the extent of 1H-15N J-coupling in 1H NMR spectra of cyanophycin. Similar experiments using 13C-15N coupling in 13C NMR spectra were not useful in determining enrichment levels.     

Expression of Synechocystis sp. PCC6803 cyanophycin synthetase in Lactococcus lactis nisin-controlled gene expression system (NICE) and cyanophycin production

Cyanophycin is a natural source of polypetide consisting of aspartic acid as a backbone and arginine as its side chain. After the removal of arginine, the remaining poly-aspartate can be served in numerous industrial and biomedical applications. The synthesis of cyanophycin is catalyzed by cyanophycin synthetase. In this study, we used lactic acid bacteria to produce cyanophycin by nisin-controlled gene expression system (NICE). The cyanophycin synthetase gene cphA of Synechocystis sp. strain PCC6803 was cloned to the vector pNZ8149 followed by transformation into Lactococcus lactis subsp. cremoris NZ3900. The effects of nisin concentrations and the amounts of supplemented aspartic acid and arginine were examined for the production of cyanophycin. Alterations of the terminus of cphA gene were also conducted in an attempt to increase the yield of cyanophycin. An optimal cyanophycin production was noted under a culture condition of log phase induced at 250 ng/mL nisin in M17L medium supplemented with 20 mM arginine and 10 mM aspartic acid. An insertion of glycine residue at the C terminus of cyanophycin synthetase resulted in a yield of 20% of dry cell weight, a 10-fold increase when compared with the wild type. The results showed that recombinant lactic acid bacteria, a GRAS system, could provide an alternative approach of producing cyanophycin suitable for agricultural and biomedical applications.     

Cyanophycin production in a phycoerythrin-containing marine synechococcus strain of unusual phylogenetic affinity

Thirty-two strains of phycoerythrin-containing marine picocyanobacteria were screened for the capacity to produce cyanophycin, a nitrogen storage compound synthesized by some, but not all, cyanobacteria. We found that one of these strains, Synechococcus sp. strain G2.1 from the Arabian Sea, was able to synthesize cyanophycin. The cyanophycin extracted from the cells was composed of roughly equimolar amounts of arginine and aspartate (29 and 35 mol%, respectively), as well as a small amount of glutamate (15 mol%). Phylogenetic analysis, based on partial 16S ribosomal DNA (rDNA) sequence data, showed that Synechococcus sp. strain G2.1 formed a well-supported clade with several strains of filamentous cyanobacteria. It was not closely related to several other well-studied marine picocyanobacteria, including Synechococcus strains PCC7002, WH7805, and WH8018 and Prochlorococcus sp. strain MIT9312. This is the first report of cyanophycin production in a phycoerythrin-containing strain of marine or halotolerant Synechococcus, and its discovery highlights the diversity of this ecologically important functional group.     

Isolation and characterization of a novel cyanophycin synthetase from a deep-sea sediment metagenomic library

Cyanophycin is non-ribosomally synthesized protein-like copolymer. Synthesis of cyanophycin is catalyzed by cyanophycin synthetase (CphA). In this study, a novel cyanophycin synthetase CphA49 belonging to NOR5 clade of Gammaproteobacteria was identified with primer-based screening from a deep-sea sediment metagenomic library. The cphA49 gene contained an open reading frame of 2,637 bp and encoded a protein with a predicted molecular mass of 100 kDa. A recombinant CphA49 was obtained by the functional expression of cphA49 in Escherichia coli BL21 (DE3). The biochemical properties of the purified CphA49 were determined. The optimum pH and temperature of the recombinant CphA49 were 9.0 and 40 °C, respectively. The enzyme was stable at temperatures below 40 °C. The recombinant CphA49 exhibited strict primer dependency and broad substrate specificities. Cyanophycin catalyzed by CphA49 exhibited homogenous molecular mass. The amino acid composition of cyanophycin was determined and constitutes arginine, aspartic acid, and lysine.     

Production of cyanophycin in <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> through the expression of a cyanophycin synthetase encoding gene

Cyanophycin or cyanophycin granule peptide is a protein that results from non-ribosomal protein synthesis in microorganisms such as cyanobacteria. The amino acids in cyanophycin can be used as a feedstock in the production of a wide range of chemicals such as acrylonitrile, polyacrylic acid, 1,4-butanediamine, and urea. In this study, an auxotrophic mutant (Rhizopus oryzae M16) of the filamentous fungus R. oryzae 99-880 was selected to express cyanophycin synthetase encoding genes. These genes originated from Synechocystis sp. strain PCC6803, Anabaena sp. strain PCC7120, and a codon optimized version of latter gene. The genes were under control of the pyruvate decarboxylase promoter and terminator elements of R. oryzae. Transformants were generated by the biolistic transformation method. In only two transformants both expressing the cyanophycin synthetase encoding gene from Synechocystis sp. strain PCC6803 was a specific enzyme activity detected of 1.5 mU/mg protein. In one of these transformants was both water-soluble and insoluble cyanophycin detected. The water-soluble fraction formed the major fraction and accounted for 0.5% of the dry weight. The water-insoluble CGP was produced in trace amounts. The amino acid composition of the water-soluble form was determined and constitutes of equimolar amounts of arginine and aspartic acid.     

Cyanophycin synthetase-like enzymes of non-cyanobacterial eubacteria: characterization of the polymer produced by a recombinant synthetase of Desulfitobacterium hafniense

Some bacterial genomes were found to contain genes encoding putative proteins with considerable sequence homology to cyanophycin synthetase CphA of cyanobacteria. Such a gene from the Gram-positive, spore-forming anaerobe Desulfitobacterium hafniense was cloned. Expression in Escherichia coli resulted in the formation of a polydispers copolymer of aspartic acid and arginine, with a minor amount of lysine, of about 30 kDa molecular mass. In contrast to cyanophycin, this polymer was water-soluble. The structure of the polymer formed by the synthetase from Desulfitobacterium hafniense was studied by enzymatic degradation with the cyanophycin-specific hydrolase cyanophycinase, and by chemical and mass-spectroscopic analyses. Despite of the differences in solubility, indicating that both polymers cannot be completely identical, the chemical structure was found to be very similar to that of cyanophycin. The results suggest that the use of cyanophycin-like polymers as a nitrogen-rich reserve material is not restricted to cyanobacteria, and that such polymers may not necessarily be stored in granules.     

Cyanophycin Production in a Phycoerythrin-Containing Marine Synechococcus Strain of Unusual Phylogenetic Affinity

Thirty-two strains of phycoerythrin-containing marine picocyanobacteria were screened for the capacity to produce cyanophycin, a nitrogen storage compound synthesized by some, but not all, cyanobacteria. We found that one of these strains, Synechococcus sp. strain G2.1 from the Arabian Sea, was able to synthesize cyanophycin. The cyanophycin extracted from the cells was composed of roughly equimolar amounts of arginine and aspartate (29 and 35 mol%, respectively), as well as a small amount of glutamate (15 mol%). Phylogenetic analysis, based on partial 16S ribosomal DNA (rDNA) sequence data, showed that Synechococcus sp. strain G2.1 formed a well-supported clade with several strains of filamentous cyanobacteria. It was not closely related to several other well-studied marine picocyanobacteria, including Synechococcus strains PCC7002, WH7805, and WH8018 and Prochlorococcus sp. strain MIT9312. This is the first report of cyanophycin production in a phycoerythrin-containing strain of marine or halotolerant Synechococcus, and its discovery highlights the diversity of this ecologically important functional group.     

PII-regulated arginine synthesis controls accumulation of cyanophycin in Synechocystis sp. strain PCC 6803

Cyanophycin (multi-L-arginyl-poly-L-aspartic acid) is a nitrogen storage polymer found in most cyanobacteria and some heterotrophic bacteria. The cyanobacterium Synechocystis sp. strain PCC 6803 accumulates cyanophycin following a transition from nitrogen-limited to nitrogen-excess conditions. Here we show that the accumulation of cyanophycin depends on the activation of the key enzyme of arginine biosynthesis, N-acetyl-L-glutamate kinase, by signal transduction protein PII.     

Tuber-specific cphA expression to enhance cyanophycin production in potatoes

The production of biodegradable polymers that can be used to substitute petrochemical compounds in commercial products in transgenic plants is an important challenge for plant biotechnology. Nevertheless, it is often accompanied by reduced plant fitness. To decrease the phenotypic abnormalities of the sprout and to increase polymer production, we restricted cyanophycin accumulation to the potato tubers by using the cyanophycin synthetase gene ( cph A_Te) from Thermosynechococcus elongatus BP-1, which is under the control of the tuber-specific class 1 promoter (B33). Tuber-specific cytosolic (pB33- cph A_Te) as well as tuber-specific plastidic (pB33-PsbY- cph A_Te) expression resulted in significant polymer accumulation solely in the tubers. In plants transformed with pB33- cph A_Te, both cyanophycin synthetase and cyanophycin were detected in the cytoplasm leading to an increase up to 2.3% cyanophycin of dry weight and resulting in small and deformed tubers. In B33-PsbY- cph A_Te tubers, cyanophycin synthetase and cyanophycin were exclusively found in amyloplasts leading to a cyanophycin accumulation up to 7.5% of dry weight. These tubers were normal in size, some clones showed reduced tuber yield and sometimes exhibited brown sunken staining starting at tubers navel. During a storage period over of 32 weeks of one selected clone, the cyanophycin content was stable in B33-PsbY- cph A_Te tubers but the stress symptoms increased. However, all tubers were able to germinate. Nitrogen fertilization in the greenhouse led not to an increased cyanophycin yield, slightly reduced protein content, decreased starch content, and changes in the amounts of bound and free arginine and aspartate, as compared with control tubers were observed.     

Purification of Synechocystis sp. strain PCC6308 cyanophycin synthetase and its characterization with respect to substrate and primer specificity

Synechocystis sp. strain PCC6308 cyanophycin synthetase was purified 72-fold in three steps by anion exchange chromatography on Q Sepharose, affinity chromatography on the triazine dye matrix Procion Blue HE-RD Sepharose, and gel filtration on Superdex 200 HR from recombinant cells of Escherichia coli. The native enzyme, which catalyzed the incorporation of arginine and aspartic acid into cyanophycin, has an apparent molecular mass of 240 +/- 30 kDa and consists of identical subunits of 85 +/- 5 kDa. The K(m) values for arginine (49 microM), aspartic acid (0.45 mM), and ATP (0.20 mM) indicated that the enzyme had a high affinity towards these substrates. During in vitro cyanophycin synthesis, 1.3 +/- 0.1 mol of ATP per mol of incorporated amino acid was converted to ADP. The optima for the enzyme-catalyzed reactions were pH 8.2 and 50 degrees C, respectively. Arginine methyl ester (99.5 and 97% inhibition), argininamide (99 and 96%), S-(2-aminoethyl) cysteine (43 and 42%), beta-hydroxy aspartic acid (35 and 37%), aspartic acid beta-methyl ester (38 and 40%), norvaline (0 and 3%), citrulline (9 and 7%), and asparagine (2 and 0%) exhibited an almost equal inhibitory effect on the incorporation of both arginine and aspartic acid, respectively, when these compounds were added to the complete reaction mixture. In contrast, the incorporation of arginine was diminished to a greater extent than that of aspartic acid, respectively, with canavanine (82 and 53%), lysine (36 and 19%), agmatine (33 and 25%), D-aspartic acid (37 and 30%), L-glutamic acid (13 and 5%), and ornithine (23 and 11%). On the other hand, canavanine (45% of maximum activity) and lysine (13%) stimulated the incorporation of aspartic acid, whereas aspartic acid beta-methyl ester (53%) and asparagine (9%) stimulated the incorporation of arginine. [(3)H]lysine (15% of maximum activity) and [(3)H]canavanine (13%) were incorporated into the polymer, when they were either used instead of arginine or added to the complete reaction mixture, whereas L-glutamic acid was not incorporated. No effect on arginine incorporation was obtained by the addition of other amino acids (i.e., alanine, histidine, leucine, proline, tryptophan, and glycine). Various samples of chemically synthesized poly-alpha,beta-D,L-aspartic acid served as primers for in vitro synthesis of cyanophycin, whereas poly-alpha-L-aspartic acid was almost inactive.     

Identification of the Anabaena sp. strain PCC7120 cyanophycin synthetase as suitable enzyme for production of cyanophycin in gram-negative bacteria like Pseudomonas putida and Ralstonia eutropha

The cyanophycin synthetase gene cphA1 encoding the major cyanophycin synthetase (CphA) of Anabaena sp. strain PCC7120 was expressed in Escherichia coli conferring so far the highest specific CphA activity to E. coli (6.7 nmol arginine per min and mg protein). CphA1 and cphA genes of Synechocystis sp. strains PCC6803 and PCC6308 and Synechococcus strain MA19 were also expressed in wild types and polyhydroxyalkanoate-negative (PHA) mutants of Pseudomonas putida and Ralstonia eutropha. Recombinant strains of these bacteria expressing cphA1 accumulated generally more cyanophycin (23.0 and 20.0% of cellular dry matter, CDM, respectively) than recombinants expressing any other cphA (6.8, 9.0, or 15.8% of CDM for P. putida strains and 7.3, 12.6, or 14.1% of CDM for R. eutropha). Furthermore, PHA-negative mutants of P. putida (9.7, 10.0, 17.5, or 24.0% of CDM) and R. eutropha (8.9, 13.8, 16.0, or 22.0% of CDM) accumulated generally more cyanophycin than the corresponding PHA-positive parent strains (6.8, 9.0, 15.8, and 23.0% of CDM for P. putida strains and 7.3, 12.6, 14.1, or 20.0% of CDM for R. eutropha strains). Recombinant strains of Gram-positive bacteria (Bacillus megaterium, Corynebacterium glutamicum) were not suitable for cyanophycin production due to accumulation of less cyanophycin and retarded release of cyanophycin. PHA-negative mutants of P. putida and R. eutropha expressing cphA1 of Anabaena sp. strain PCC7120 are therefore preferred candidates for industrial production of cyanophycin.     

Variations in the amino acid composition of cyanophycin in the cyanobacterium Synechocystis sp. PCC 6308 as a function of growth conditions

Gas chromatography-mass spectrometry studies of the nitrogen isotopic composition of the N-trifluoroacetyl n-butyl ester derivatives of the amino acids from isolated hydrolyzed cyanophycin from ¹⁵N-enriched cells led to two major findings: (1) the amino acid composition of this granular polypeptide, isolated using procedures optimized for extracting and purifying cyanophycin from cells in the stationary growth phase, varied with the culture growth condition; (2) the rate of incorporation of exogenous nitrate differed for each nitrogen atom of the amino acid constituents of cyanophycin or cyanophycin-like polypeptide. Arginine and aspartic acid were the principle components of cyanophycin isolated from exponentially growing cells and from light-limited stationary phase cells, with glutamic acid as an additional minor component. The cyanophycin-like polypeptide from nitrogen-limited cells contained only aspartic and glutamic acids, but no arginine. The glutamic acid content decreased and arginine content increased as nitrate was provided to nitrogen-limited cells. These cells rapidly incorporated nitrate at different rates at each cyanophycin nitrogen site: guanidino nitrogens of arginine>aspartic acid >-amino nitrogen of arginine>glutamic acid. Little media-derived nitrogen was incorporated into cyanophycin of exponentially growing cells during one cellular doubling time.Abbreviations asp-TAB, glu-TAB, arg-TAB N-Trifluoroacetyl n-butyl ester derivatives of aspartic acid, glutamic acid and arginine, respectively - CAP chloramphenicol - CF correction factor - TFAA Trifluoroacetic anhydride - MBTFA N-Methyl-bis-trifluoroacetamide     

Molecular characterization of a thermostable cyanophycin synthetase from the thermophilic cyanobacterium Synechococcus sp. strain MA19 and in vitro synthesis of cyanophycin and related polyamides.

The thermophilic cyanobacterium Synechococcus sp. strain MA19 contained the structural genes for cyanophycin synthetase (cphA) and cyanophycinase (cphB), which were identified, cloned, and sequenced in this study. The translation products of cphA and cphB exhibited high levels of similarity to corresponding proteins of other cyanobacteria, such as Anabaena variabilis and Synechocystis sp. Recombinant cells of Escherichia coli harboring cphA colinear with lacPO accumulated cyanophycin that accounted for up to 25% (wt/wt) of the dry cell matter in the presence of isopropyl-beta-D-thiogalactopyranoside (IPTG). The cyanophycin synthetase was enriched 123-fold to electrophoretic homogeneity from the soluble fraction of the recombinant cells by anion-exchange chromatography, affinity chromatography, and gel filtration chromatography. The purified cyanophycin synthetase maintained the parental thermophilic character and was active even after prolonged incubation at 50 degrees C; in the presence of ectoine the enzyme retained 90% of its activity even after 2 h of incubation. The in vitro activity of the enzyme depended on ATP, primers, and both substrates, L-arginine and L-aspartic acid. In addition to native cyanophycin, the purified enzyme accepted a modified cyanophycin containing less arginine, alpha-arginyl aspartic acid dipeptide, and poly-alpha,beta-DL-aspartic acid as primers and also incorporated beta-hydroxyaspartic acid instead of L-aspartic acid or L-canavanine instead of L-arginine at a significant rate. The lack of specificity of this thermostable enzyme with respect to primers and substrates, the thermal stability of the enzyme, and the finding that the enzyme is suitable for in vitro production of cyanophycin make it an interesting candidate for biotechnological processes.     

Purification and characterization of cyanophycin and cyanophycin synthetase from the thermophilic Synechococcus sp. MA19

The biosynthesis and accumulation of cyanophycin in the thermophilic cyanobacterium Synechococcus sp. MA19 were studied. By growing the cells in a 80-l closed tubular photobioreactor under controlled conditions, the cells accumulated cyanophycin amounting up to 3.5% of the dry cell matter. The cyanophycin was purified and chemical analysis showed that it was composed of arginine and aspartic acid occurring at a molar ratio of 1:0.9. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed a broad distribution of the apparent molecular masses ranging from 20 to 130 kDa with a maximum at 50 kDa. During a three-step purification procedure involving ion exchange chromatography and gel filtration, the cyanophycin synthetase from strain MA19 was purified 144-fold to electrophoretic homogeneity. It consisted of only one single type of subunit exhibiting an apparent molecular mass of 130 kDa. The enzyme catalyzed the polymerization of arginine and aspartate at elevated temperatures and was even active at 80 degrees C.     

Features of the biotechnologically relevant polyamide family “cyanophycins” and their biosynthesis in prokaryotes and eukaryotes

Cyanophycin, inclusions in cyanobacteria discovered by the Italian scientist Borzi in 1887, were characterized as a polyamide consisting of aspartic acid and arginine. Its synthesis in cyanobacteria was analyzed regarding growth conditions, responsible gene product, requirements, polymer structure and properties. Heterologous expression of diverse cyanophycin synthetases (CphA) in Escherichia coli enabled further enzyme characterization. Cyanophycin is a polyamide with variable composition and physiochemical properties dependent on host and cultivation conditions in contrast to the extracellular polyamides poly-γ-glutamic acid and poly-ε-l-lysine. Furthermore, recombinant prokaryotes and transgenic eukaryotes, including plants expressing different cphA genes, were characterized as suitable for production of insoluble cyanophycin regarding higher yields and modified composition for other requirements and applications. In addition, cyanophycin was characterized as a source for the synthesis of polyaspartic acid or N-containing bulk chemicals and dipeptides upon chemical treatment or degradation by cyanophycinases, respectively. Moreover, water-soluble cyanophycin derivatives with altered amino acid composition were isolated from transgenic plants, yeasts and recombinant bacteria. Thereby, the range of dipeptides could be extended by biological processes and by chemical modification, thus increasing the range of applications for cyanophycin and its dipeptides, including agriculture, food supplementations, medical and cosmetic purposes, synthesis of the polyacrylate substitute poly(aspartic acid) and other applications.     

Effects of light and chloramphenicol stress on incorporation of nitrogen into cyanophycin in Synechocystis sp. strain PCC 6308

(1)H NMR spectroscopy was used to compare the uptake of nitrogen into cyanobacterial cyanophycin from two sources: from the breakdown of intracellular proteins and amino acids, and directly from the external growth medium. Cells grown initially in medium containing (14)N-nitrate were transferred to (15)N-nitrate medium in the presence of chloramphenicol in both low (4 microE m(-2) s(-1)) and normal (100 microE m(-2) s(-1)) light, and in low light alone. Cyanophycin was separated from cells and analyzed by (1)H NMR spectroscopy. Cyanophycin is synthesized both from (14)N (degradation of cellular proteins) and from (15)N in the medium, the latter at a faster rate and to a greater extent under all conditions. SDS-PAGE showed that cyanophycin synthesis takes place by addition of monomers to already synthesized polymer.