Hybrid cooling vest for cooling between exercise bouts in the heat: Effects and practical considerations

While continuous cooling strategies may induce some ergonomic problems to occupational workers, cooling between work bouts may be an alternative for cooling them down in hot environments. The purpose of this study was to assess the effects of wearing a newly designed hybrid cooling vest (HCV) between two bouts of exercise. Inside a climatic chamber set at an air temperature of 37 °C and a relative humidity of 60%, twelve male participants underwent two bouts of intermittent exercise interspersed with a 30 min between-bout recovery session, during which HCV or a passive rest without any cooling (PAS) was administered. The results indicated that thermoregulatory, physiological, and perceptual strains were significantly lower in HCV than those in PAS during the recovery session (p≤0.022), which were accompanied with a large effect of cooling (Cohen's d=0.84–2.11). For the second exercise bout, the exercise time following HCV (22.13±12.27 min) was significantly longer than that following PAS (11.04±3.40 min, p=0.005, d=1.23) During this period, core temperature T_c was significantly lower by 0.14±0.0.15 °C in HCV than that in PAS. The heart rate drift over time was declined by 2±2 bpm min⁻¹ (p=0.001, d=1.00) and the rise in physiological strain index was reduced by 0.11±0.12 unit min⁻¹ (p=0.010, d=0.96) following the use of HCV. These findings suggested that using HCV could accelerate between-bout recovery and improve subsequent exercise performance by the enlarged body core temperature margin and blunted cardiovascular drift.     

Predicting small endotherm body temperatures from scalp temperatures

We used 2-d to 3-d-old mallard ducklings (Anas platyrhynchos) to test whether remote thermographic measurement of scalp temperature could be used to estimate core (cloacal) temperature from a distance. The scalp was exposed by trimming down from an area of ⩽1 cm², and surface temperature measured to ±0.12 °C with a radiometric thermal imager. For wind speeds of up to 2.5 m/s, we found cloacal temperature could be estimated to within 1 °C by using a regression model incorporating only scalp temperature and ambient temperature. The inexpensive method of dyeing the scalp black and painting it with temperature-sensitive cholesteric liquid crystal paint is more difficult and provides less accuracy, but appears to be a useful means for monitoring change in body temperature. These methods allow body temperatures of small or young endotherms to be monitored from distances of up to several meters without surgery or encumbering wires, minimizing stress that may alter behavior patterns and physiological parameters.     

Determination of heat transfer coefficients in plastic French straws plunged in liquid nitrogen

The knowledge of the thermodynamic process during the cooling of reproductive biological systems is important to assess and optimize the cryopreservation procedures. The time–temperature curve of a sample immersed in liquid nitrogen enables the calculation of cooling rates and helps to determine whether it is vitrified or undergoes phase change transition. When dealing with cryogenic liquids, the temperature difference between the solid and the sample is high enough to cause boiling of the liquid, and the sample can undergo different regimes such as film and/or nucleate pool boiling.In the present work, the surface heat transfer coefficients (h) for plastic French straws plunged in liquid nitrogen were determined using the measurement of time–temperature curves. When straws filled with ice were used the cooling curve showed an abrupt slope change which was attributed to the transition of film into nucleate pool boiling regime. The h value that fitted each stage of the cooling process was calculated using a numerical finite element program that solves the heat transfer partial differential equation under transient conditions. In the cooling process corresponding to film boiling regime, the h that best fitted experimental results was h = 148.12 ± 5.4 W/m² K and for nucleate-boiling h = 1355 ± 51 W/m² K. These values were further validated by predicting the time–temperature curve for French straws filled with a biological fluid system (bovine semen-extender) which undergoes freezing. Good agreement was obtained between the experimental and predicted temperature profiles, further confirming the accuracy of the h values previously determined for the ice-filled straw. These coefficients were corroborated using literature correlations.The determination of the boiling regimes that govern the cooling process when plunging straws in liquid nitrogen constitutes an important issue when trying to optimize cryopreservation procedures. Furthermore, this information can lead to improvements in the design of cooling devices in the cryobiology field.     

Determination of time of death in forensic science via a 3-D whole body heat transfer model

This study is focused on developing a whole body heat transfer model to accurately simulate temperature decay in a body postmortem. The initial steady state temperature field is simulated first and the calculated weighted average body temperature is used to determine the overall heat transfer coefficient at the skin surface, based on thermal equilibrium before death. The transient temperature field postmortem is then simulated using the same boundary condition and the temperature decay curves at several body locations are generated for a time frame of 24 h. For practical purposes, curve fitting techniques are used to replace the simulations with a proposed exponential formula with an initial time delay. It is shown that the obtained temperature field in the human body agrees very well with that in the literature. The proposed exponential formula provides an excellent fit with an R² value larger than 0.998. For the brain and internal organ sites, the initial time delay varies from 1.6 to 2.9 h, when the temperature at the measuring site does not change significantly from its original value. The curve-fitted time constant provides the measurement window after death to be between 8 h and 31 h if the brain site is used, while it increases 60–95% at the internal organ site. The time constant is larger when the body is exposed to colder air, since a person usually wears more clothing when it is cold outside to keep the body warm and comfortable. We conclude that a one-size-fits-all approach would lead to incorrect estimation of time of death and it is crucial to generate a database of cooling curves taking into consideration all the important factors such as body size and shape, environmental conditions, etc., therefore, leading to accurate determination of time of death.     

Pyrogenic effects of cytokines (IL-1β, IL- 6, TNF-α) and their mode of action on thermoregulatory centers and functions

The objective of this study was to compare the thermoregulatory responses of rabbits to fever-inducing doses of various cytokines (IL-1β, IL-6, TNF-α) injected peripherally (i.v.), or centrally (i.h.).TNF-α (1 μg kg⁻¹), when applied i.v. at thermoneutral conditions, induced a long lasting increase in hypothalamic temperature, which reached maximal values within 50 min and then persisted for at least 3 h. This monophasic fever-like response was due to extensive and long lasting attenuation of panting and due to transient vasoconstriction. Metabolic rate tended to increase during the early phase of the fever, only. On the other hand, IL-6 when applied i.v. in the same dose (1 μg kg⁻¹) and IL-1β, in a much lower dose (60 ng kg⁻¹), induced a short lasting monophasic hyperthermia due to transient attenuation of panting and due to transient vasoconstriction. No significant increase in metabolic rate was observed. The immediate attenuation of panting and induction of vasoconstriction rather resembled reflex (shock) responses than specific thermoregulatory reactions. Thirty minutes after i.v. administration of TNF-α, temperature thresholds for induction of cold thermogenesis, panting and vasomotion were shifted to higher body temperatures and remained elevated for at least 3 h. In case of IL-1β the increased temperature thresholds were observed 30 min after i.v. administration, only. I.v. applied IL-6 did not influence the thresholds neither 30 or 180 min after injection. Thus, peripheral IL-6 rather induced hyperthermia than fever.When injected i.h. all cytokines studied induced a long lasting increase in body temperature similar to that after i.v. injection of LPS. Temperature thresholds for induction of all thermoregulatory outputs were increased and remained increased for at least 3 h. No changes in hypothalamic thermosensitivity were observed. Data indicate a nonspecific effect of central cytokines on body temperature control.IL-1β appeared to be the most potent fever inducer. Nanogram doses of IL-1β injected i.v. induced a similar febrile response as microgram doses of other cytokines. On the other hand, TNF-α induced a longer lasting fever than other cytokines.     

Satellite- versus temperature-derived green wave indices for predicting the timing of spring migration of avian herbivores

According to the green wave hypothesis, herbivores follow the flush of spring growth of forage plants during their spring migration to northern breeding grounds. In this study we compared two green wave indices for predicting the timing of the spring migration of avian herbivores: the satellite-derived green wave index (GWI), and an index of the rate of acceleration in temperature (GDDjerk). The GWI was calculated from MODIS normalized difference vegetation index (NDVI) satellite imagery and GDDjerk from gridded temperature data using products from the global land data assimilation system (GLDAS). To predict the timing of arrival at stopover and breeding sites, we used four years (2008–2011) of tracking data from 12 GPS-tagged barnacle geese, a long-distance herbivorous migrant, wintering in the Netherlands, breeding in the Russian Arctic. The stopover and breeding sites for these birds were identified and the relations between date of arrival with the date of 50% GWI and date of peak GDDjerk at each site were analyzed using mixed effect linear regression. A cross-validation method was used to compare the predictive accuracy of the GWI and GDDjerk indices. Significant relationships were found between the arrival dates at the stopover and breeding sites for the dates of 50% GWI as well as the peak GDDjerk (p < 0.01). The goose arrival dates at both stopover and breeding sites were predicted more accurately using GWI (R²_cv = 0.68, RMSD_cv = 5.9 and  R²_cv= 0.71, RMSD_cv = 3.9 for stopover and breeding sites, respectively) than GDDjerk. The GDDjerk returned a lower accuracy for prediction of goose arrival dates at stopover ( R²_cv = 0.45, RMSD_cv = 7.79) and breeding sites (R²_cv = 0.55, RMSD_cv = 4.93). The positive correlation between the absolute residual values of the GDDjerk model and distance to the breeding sites showed that this index is highly sensitive to latitude. This study demonstrates that the satellite-derived green wave index (GWI) can accurately predict the timing of goose migration, irrespective of latitude and therefore is suggested as a reliable green wave index for predicting the timing of avian herbivores spring migration.     

Reproductive responses of ram lambs under short-term exposure to endophyte-infected tall fescue seed

Our objective was to determine the influence of short-term exposure to endophyte-infected tall fescue on reproductive function of ram lambs. Rams (214 days of age) were fed a diet free of endophyte-infected fescue seed (EF; n = 8) or endophyte-infected fescue seed (EI; n = 9; 34% of diet; 4.8 μg g⁻¹ ergovaline) for 6 weeks. Feed offered to EF rams, individually fed, was reduced to the average intake of EI lambs from previous day so that intake was similar between treatments and averaged 2.4% BW (DM basis), leading to daily intake of 33.7 μg ergovaline kg⁻¹ BW for the EI fed lambs. Daily high ambient temperature for the trial ranged between 16 and 26 °C. Respiration rate and rectal temperature were measured at 14:00 daily. Blood was collected for serum concentrations of prolactin (weekly) and testosterone (twice weekly). Body weight and body condition scores (BCS; 1 = thin; 5 = fat) were determined every 14 days. Scrotal circumference, scrotal skin temperature, and semen characteristics were determined weekly. Rams were slaughtered after 6 weeks of feeding. Signs of fescue toxicosis in EI fed rams included increased rectal temperature (P < 0.001, R² = 0.11) and respiration rate (day, P < 0.001, R² = 0.25) when high ambient temperature exceeded 22 °C and reduced serum concentrations of prolactin (diet × day, P < 0.001). Body weight of EI fed rams tended to decrease after 36 days of feeding compared with EF fed rams (−3.0 kg versus 0.51 kg; P < 0.07) and BCS was similar between treatment throughout the trial. Serum concentrations of testosterone were greater in EI compared with EF fed rams (diet × day, P < 0.005, R² = 0.08). Scrotal skin temperature, scrotal circumference, semen volume, percent sperm motility, and percent abnormal sperm were similar between treatments. Spermatozoa concentration tended to be greater in EF compared with EI fed rams after 43 days of feeding (P < 0.10; R² = 0.15). Rate of forward movement of spermatozoa tended to increase at a greater rate between Days 8 and 29 in EF compared with EI fed rams (diet × day, P < 0.08). Feeding endophyte-infected fescue seed to ram lambs was associated with potential decreased fertility and increased serum concentrations of testosterone. Short term exposure of endophyte toxins to male ruminants may negatively impact reproductive responses. Feeding for longer periods may further reduce fertility and merits further research.     

Quantifying human disturbance on antipredator behavior and flush initiation distance in yellow-bellied marmots

Human disturbance may differentially affect the behavior of wild animals and such behavioral perturbations may have fitness consequences. To understand the effects of specific types of human disturbance on antipredator behavior, a behavior whose performance enhances survival, we studied yellow-bellied marmots (Marmota flaviventris). We quantified both antipredator vigilance and the flight initiation distance of the marmots to an approaching human in six different colony sites where we also quantified the frequency and type of human visitation. We developed an analysis framework, using linear mixed models, and found that: (1) when the presence of motorized vehicles and bicycles was high, marmots increased the proportion of time spent vigilant (pseudo R² = 0.33 and 0.31 for motorized vehicles and bicycles, P < 0.05) and decreased the time spent foraging (pseudo R² = 0.29 and 0.23 for motorized vehicles and bicycles, P < 0.05), (2) there was no significant effect of the presence of pedestrians on the time allocated to vigilance and foraging (pseudo R² = 0.25 and 0.19, P > 0.05), (3) marmots decreased the flight initiation distance as disturbance of motorized vehicles (pseudo R² = 0.85) and pedestrians (pseudo R² = 0.84) increased (P < 0.05), and (4) when we considered bicycles as the disturbance, juveniles tolerated closer approaches than adults or yearlings (P < 0.001). Marmots thus responded to some human disturbance by adjusting time spent in foraging and shortening the tolerance distance. Since these behavioral responses could have significant implications for survival and reproduction, we should generally view human disturbance as something that can influence natural antipredator behavior. Importantly, based on an understanding of the differential effects of human activities on wildlife, reducing human disturbance should be taken into account for wildlife management. In addition, our approach will be useful to quantify differential effects of humans on wildlife and to enhance our ability to manage those impacts.     

Mapping riparian condition indicators in a sub-tropical savanna environment from discrete return LiDAR data using object-based image analysis

Mapping, monitoring and managing the environmental condition of riparian zones are major focus areas for local and state governments in Australia. New remotely sensed data techniques that can provide the required mapping accuracies, complete spatial coverage and processing and mapping transferability are currently being developed for use over large spatial extents. The research objective was to develop and apply an approach for mapping riparian condition indicators using object-based image analysis of airborne Light Detection and Ranging (LiDAR) data. The indicators assessed were: streambed width; riparian zone width; plant projective cover (PPC); longitudinal continuity; coverage of large trees; vegetation overhang; and stream bank stability. LiDAR data were captured on 15 July 2007 for two 5 km stretches along Mimosa Creek in Central Queensland, Australia. Field measurements of riparian vegetation structural and landform parameters were obtained between 28 May and 5 June 2007. Object-based approaches were developed for mapping each riparian condition indicator from the LiDAR data. The validation and empirical modelling results showed that the object-based approach could be used to accurately map the riparian condition indicators (R² = 0.99 for streambed width, R² = 0.82 for riparian zone width, R² = 0.89 for PPC, R² = 0.40 for bank stability). These research findings will be used in a 26,000 km mapping project assessing riparian vegetation and physical form indicators from LiDAR data in Victoria, Australia.     

Determination of prediction equations for estimating body weight of Zulu (Nguni) sheep

Data on linear body measurements (LBM) of 403 sheep collected in three areas of KwaZulu-Natal were utilized to develop a prediction equation for live body weight of Zulu sheep. Data were collected on live weight (LW), heart girth (HG), wither height (WH) and scrotum circumference (SC) on sheep of all ages. The age of sheep was estimated by dentition. The analysis of variance showed that age and sex were important factors contributing to variation in LW of Zulu sheep. Phenotypic correlation coefficients and regression equations of LW on HG, WH and SC were computed within different age groups (milk set of teeth, one pair, two pairs and the three and four pairs of incisors). Low correlation coefficients (r = 0.21–0.48) between LW, HG and WH were found among the pregnant ewes. The relationship between LBM and LW was stronger (r = 0.66–0.86) for males than among females (r = 0.42–0.75). The cubic polynomial of HG was the best fit (R² = 0.76) for the live weight prediction of young sheep with milk set of teeth. The combination of HG and WH produced the best fit for the two tooth and above males and non-pregnant females. The LW prediction equations for pregnant females were not reliable (R² = 0.05–0.26). The SC was more precise (R² = 0.61–0.80) when estimating the live weight of young males (<15–22-month-old) than of the older rams (R² = 0.23–0.56). It was concluded that LW of Zulu sheep can be reasonably estimated using the HG and WH. A table could be constructed for the farmers to estimate the LW of their animals.     

Whole crop rice silage: Predictions of yield and content of metabolizable energy,metabolizable protein and other nutrients for dairy cows from crop maturity and botanical fractions at harvest

The study investigated the suitability of stage of maturity and botanical fractions of whole crop rice (WCR) to predict yield and nutritive value of ensiled WCR for dairy cows. Eight varieties of WCR (i.e., Akichikara, Fukuhibiki, Habataki, Hamasari, Hokuriku 168, Kusanami, Tamakei 96, Yumetoiro) were harvested at four stages of maturity (i.e., 10, 22, 34, 45 days after flowering [DAF]) and ensiled. Dry matter (DM) yield at each harvest was determined. Silage samples were fractionated into four botanical fractions being: leaf blade, leaf sheath, stem and head. Silage samples were also analyzed for chemical composition, fermentation characteristics, in situ DM and N disappearance. Metabolizable energy (ME) and metabolizable protein (MP) content of samples were estimated according to Terada et al. (1988) and AFRC (1993), respectively. Relationships between maturity or proportions of botanical fractions and contents of WCR silage in terms of DM, ME and MP, and their yields, were estimated by correlation and regression analysis. Stage of maturity was positively related (P<0.001) to ME content (R² = 0.46; y = 4.53 + 0.08X) and MP content (R² = 0.56; y = 22.26 + 0.76X), and DM yield (R² = 0.63; y = 9.21 + 0.12X), ME yield (R² = 0.68, y = 36931 + 1708X) and MP yield (R² = 0.72, y = 161.0 + 14.15X) of WCR. Proportion of leaf was negatively related to yields and nutritive value of ensiled WCR, whilst proportion of head was positively related (P<0.05 to <0.001). Proportion of head was best related to the ME content (R² = 0.72; y = 3.26 + 0.009X), MP content (R² = 0.72; y = 12.31 + 0.079X), and DM yield (R² = 0.41; y = 9.02 + 0.009X), ME yield (R² = 0.76, y = 19494 + 165.5X), and MP yield (R² = 0.75, y = 34.37 + 1.32X) of WCR. Results suggest that to optimize yield and nutritive value, WCR should be ensiled within 40 DAF and the proportion of head should be equal to or more than 500 g per kg DM of WCR silage. Stage of maturity and proportion of head of WCR predict yields of DM, ME and MP of WCR, and their contents, in WCR silage with acceptable accuracy. However, these relationships need to be validated using large data sets and in vivo studies.     

Estimation of wetland vegetation height and leaf area index using airborne laser scanning data

Wetland vegetation is a core component of wetland ecosystems. Wetland vegetation structural parameters, such as height and leaf area index (LAI) are important variables required by earth-system and ecosystem models. Therefore, rapid, accurate, objective and quantitative estimations of wetland vegetation structural parameters are essential. The airborne laser scanning (also called LiDAR) is an active remote sensing technology and can provide accurate vertical vegetation structural parameters, but its accuracy is limited by short, dense vegetation canopies that are typical of wetland environments. The objective of this research is to explore the potential of estimating height and LAI for short wetland vegetation using airborne discrete-return LiDAR data.The accuracies of raw laser points and LiDAR-derived digital elevation models (DEM) data were assessed using field GPS measured ground elevations. The results demonstrated very high accuracy of 0.09 m in raw laser points and the root mean squared error (RMSE) of the LiDAR-derived DEM was 0.15 m.Vegetation canopy height was estimated from LiDAR data using a canopy height model (CHM) and regression analysis between field-measured vegetation heights and the standard deviation (σ) of detrended LiDAR heights. The results showed that the actual height of short wetland vegetation could not be accurately estimated using the raster CHM vegetation height. However, a strong relationship was observed between the σ and the field-measured height of short wetland vegetation and the highest correlation occurred (R² = 0.85, RMSE = 0.14 m) when sample radius was 1.50 m. The accuracy assessment of the best-constructed vegetation height prediction model was conducted using 25 samples that were not used in the regression analysis and the results indicated that the model was reliable and accurate (R² = 0.84, RMSE = 0.14 m).Wetland vegetation LAI was estimated using laser penetration index (LPI) and LiDAR-predicted vegetation height. The results showed that the vegetation height-based predictive model (R² = 0.79) was more accurate than the LPI-based model (the highest R² was 0.70). Moreover, the LAI predictive model based on vegetation height was validated using the leave-one-out cross-validation method and the results showed that the LAI predictive model had a good generalization capability. Overall, the results from this study indicate that LiDAR has a great potential to estimate plant height and LAI for short wetland vegetation.     

Process length variation in cysts of a dinoflagellate,Lingulodinium machaerophorum,in surface sediments: Investigating its potential as salinity proxy

A biometrical analysis of the dinoflagellate cyst Lingulodinium machaerophorum [Deflandre, G., Cookson, I.C., 1955. Fossil microplankton from Australia late Mesozoic and Tertiary sediments. Australian journal of Marine and Freshwater Research 6: 242–313.] Wall, 1967 in 144 globally distributed surface sediment samples revealed that the average process length is related to summer salinity and temperature at a water depth of 30 m by the equation (salinity/temperature) = (0.078?average process length + 0.534) with R² = 0.69. This relationship can be used to reconstruct palaeosalinities, albeit with caution. The particular ecological window can be associated with known distributions of the corresponding motile stage Lingulodinium polyedrum (Stein) Dodge, 1989. Confocal laser microscopy showed that the average process length is positively related to the average distance between process bases (R² = 0.78), and negatively related to the number of processes (R² = 0.65). These results document the existence of two end members in cyst formation: one with many short, densely distributed processes and one with a few, long, widely spaced processes, which can be respectively related to low and high salinity/temperature ratios. Obstruction during formation of the cysts causes anomalous distributions of the processes. From a biological perspective, processes function to facilitate sinking of the cysts through clustering.     

Electromyographic and mechanomyographic responses across repeated maximal isometric and concentric muscle actions of the leg extensors

The purpose of the present study was to examine the patterns of responses for torque, electromyographic (EMG) amplitude, EMG mean power frequency (MPF), mechanomyographic (MMG) amplitude, and MMG MPF across 30 repeated maximal isometric (ISO) and concentric (CON) muscle actions of the leg extensors. Twelve female subjects (21.1 ± 1.4 yrs; 63.3 ± 7.4 kg) performed ISO and CON fatigue protocols with EMG and MMG signals recorded from the vastus lateralis. The relationships for torque, EMG amplitude, EMG MPF, MMG amplitude, and MMG MPF versus repetition number were examined using polynomial regression. The results indicated there were decreases (p < 0.05) across the ISO muscle actions for torque (r² = 0.95), EMG amplitude (R² = 0.44), EMG MPF (r² = 0.62), and MMG MPF (r² = 0.48), but no change in MMG amplitude (r² = 0.07). In addition, there were decreases across the CON muscle actions for torque (R² = 0.97), EMG amplitude (R² = 0.46), EMG MPF (R² = 0.86), MMG amplitude (R² = 0.44), and MMG MPF (R² = 0.80). Thus, the current findings suggested that the mechanisms of fatigue and motor control strategies used to modulate torque production were similar between maximal ISO and CON muscle actions.     

Effect of heat treatment on lactoperoxidase activity in caprine milk

Using isothermal conditions, inactivation of lactoperoxidase (LPO) in caprine milk was studied in a temperature range of 69–73 °C. In order to evaluate the effect of temperature on the reaction rate, the Arrhenius and thermal death time models were used for data analysis. Thermal inactivation of LPO can be accurately described by a first-order kinetic model, as indicated by the relationships obtained by plotting the retention values as a function of treatment time on a semi-logarithmic scale and confirmed by the high R²-values obtained. D- and k-values decreased and increased, respectively with increasing temperature, indicating a more rapid LPO inactivation at higher temperatures. The corresponding Z- and E_a-values calculated from the slope of the semi-logarithmic plots of D and k as a function of temperature were 9.45 °C and 225.98 kJ/mol, respectively.     

Asymmetric reduction of (4S)-(+)-carvone catalyzed by baker's yeast: A green method for monitoring the conversion based on liquid–liquid–liquid microextraction with polypropylene hollow fiber membranes

The α,β-unsaturated carbonyl compound (4S)-(+)-carvone was selectively reduced to (1R,2R,4S)-iso-dihydrocarveol using baker's yeasts. The conversion of the bioreduction reaction was monitored using a green hollow-fiber liquid–liquid–liquid microextraction (HF-LLLME) technique. Several parameters which may affect the bioreduction of (4S)-(+)-carvone, such as temperature, time, substrate/enzyme ratio, pH and buffer concentration, were evaluated. The effect of some additives, such as trehalose, DMSO and the ionic liquid [BMIm][PF₆], was also studied. The (1R,2R,4S)-iso-dihydrocarveol was recovered with 52.7% conversion and diastereoisomeric excess >99% after 48 h of reaction at 40 °C in an aqueous monophasic system, with 0.1 mol L^?1 buffer concentration (pH 7.5) and a substrate/yeast cell mass ratio of 8.0 mg g^?1. The HF-LLLME microextraction technique allowed the optimization of the reaction with a reduction of over 99.5% in relation to the use of organic solvents.     

Coupling heat flux dynamics with meteorological conditions in the green roof ecosystem

Green roofs can notably modify the thermal properties of the building envelope and adjacent air to bring environmental benefits. This study investigates the heat flux dynamics of the tropical green roof ecosystem to provide a scientific basis for design and management. Green roof experimental plots were established to monitor the total solar radiation, net radiation, and micrometeorological parameters. The data permit calculation of sensible and latent heat fluxes using the Bowen ratio energy balance (BREB) method. The results demonstrated the life cycle characteristics of heat flux components. The dynamic changes of sensible (H), latent (λE) and soil (G) heat fluxes were denoted by single-peak quadratic curves. Net radiation (R_n) was largely determined by quantity and variation trends of λE, reaching at 1300 h a maximum λE of 655 W m^?2 and maximum H of 369 W m^?2. Temporal heat-flux fluctuations were strongly correlated with meteorological variables. Extreme values of H and λE correlated well with precipitation and temperature (R² = 0.78). Dynamics of heat-flux magnitude and partitioning demonstrated notable differences by daily and season periods. They displayed considerable variations in flux partitioning, with Bowen ratios strongly correlated with weather conditions and vegetation types. The energy budget of the green roof ecosystem is unbalanced with a heat loss of about 15.5% caused by soil and canopy heat reserve. The passive indoor cooling effect under the green roof is attributed to the unbalanced energy closure.     

Improvement of (R)-carbonyl reductase-mediated biosynthesis of (R)-1-phenyl-1,2-ethanediol by a novel dual-cosubstrate-coupled system for NADH recycling

An NAD(H)-dependent (R)-carbonyl reductase (RCR) from Candida parapsilosis catalyzes the asymmetric reduction of 2-hydroxyacetophenone (2-HAP) to (R)-1-phenyl-1,2-ethanediol ((R)-PED), which is a valuable chiral building block in the pharmaceutical and fine chemical industries. Biosynthesis efficiency of (R)-PED was considerably improved by a novel dual-cosubstrate-coupled system. By simultaneously employing isopropanol (10%, v v^?1) and glycerol (8%, v v^?1) as sacrificial cosubstrates, the (R)-PED product had an excellent optical purity of >99.9% and a conversion of 85.5%, which were nearly 2- and 11-fold higher than those without adding cosubstrate, respectively. Besides, the productivity was dramatically enhanced from 0.02 g L^?1 h^?1 to 5 g L^?1 h^?1, and the maximum acceptable concentration of 2-HAP was elevated to 10 g L^?1. Isopropanol was directly oxidized by RCR in the formation of NADH, while glycerol was metabolized by cellular enzymes to release NADH. Moreover, glycerol prevented cells from losing viability and alleviated the toxicity of isopropanol and acetone for cells. Interestingly, there was a cooperative interaction between isopropanol and glycerol for the improvement of biosynthesis efficiency of (R)-PED.     

Evaluation of (Z)-2-((1-benzyl-1H-indol-3-yl)methylene)-quinuclidin-3-one analogues as novel,high affinity ligands for CB1 and CB2 cannabinoid receptors

A small library of N-benzyl indolequinuclidinone (IQD) analogs has been identified as a novel class of cannabinoid ligands. The affinity and selectivity of these IQDs for the two established cannabinoid receptor subtypes, CB1 and CB2, was evaluated. Compounds 8 (R = R² = H, R¹ = F) and 13 (R = COOCH₃, R¹ = R² = H) exhibited high affinity for CB2 receptors with K_i values of 1.33 and 2.50 nM, respectively, and had lower affinities for the CB1 receptor (K_i values of 9.23 and 85.7 nM, respectively). Compound 13 had the highest selectivity of all the compounds examined, and represents a potent cannabinoid ligand with 34-times greater selectivity for CB2R over CB1R. These findings are significant for future drug development, given recent reports demonstrating beneficial use of cannabinoid ligands in a wide variety of human disease states including drug abuse, depression, schizophrenia, inflammation, chronic pain, obesity, osteoporosis and cancer.     

Trispyrazolylmethane piano stool complexes of iron(II) and cobalt(II)

A series of cationic trispyrazolylmethane complexes of the general form [Tm^RM(CH₃CN)₃]²⁺ (Tm = tris(pyrazolyl)methane, 1, R = 3,5-Me₂, M = Fe(II); 2, R = 3-Ph, M = Fe(II); 3, R = 3,5-Me₂, M = Co(II); 4, R = 3-Ph, M = Co(II)) with ‘piano-stool’ structures was prepared by the reaction of the N₃tripodal ligands (Tm^R)with [(CH₃CN)₆M](BF₄)₂ in a 1:1 stoichiometric ratio. Magnetic susceptibility measurements indicate that all four complexes with BF₄⁻ counter anions are paramagnetic, high-spin systems in the solid state with μ_eff at high temperatures of 5.2 (1, S = 2), 5.4 (2, S = 2), 4.9 (3, S = 3/2) and 4.6 (4, S = 3/2) BM, respectively. Comparisons of bond lengths from the metal centre to the Tm^R nitrogen donors, and from the metal centre to the acetonitrile nitrogen donors indicate that the neutral tripodal ligands appear to be more weakly coordinated to the metal centre than are the acetonitrile ligands. Reactions of these tripodal complexes with bidentate phosphine ligands, such as 1,2-diphosphinoethane or 1,2-bis(diallylphosphino)ethane leads to displacement of the tripodal ligand, or to the formation of more thermally stable bis-ligand complexes M(Tm^R)₂ (R = 3,5-dimethyl).