Studies on Enantioselective Liquid–Liquid Extraction of Amino‐(4‐nitro‐phenyl)‐acetic Acid Enantiomers: Modeling and Optimization

BINAP‐metal complexes were prepared as extractant for enantioselective liquid–liquid extraction (ELLE) of amino‐(4‐nitro‐phenyl)‐acetic acid (NPA) enantiomers. The influence of process variables, including types of organic solvents and metal precursor, concentration of ligand, pH, and temperature on the efficiency of the extraction, were investigated experimentally. An interfacial reaction model was established for insightful understanding of the chiral extraction process. Important parameters required for the model were determined. The experimental data were compared with model predictions to verify the model prediction, It was found that the interfacial reaction model predicted the experimental results accurately. By modeling and experiment, an optimal extraction condition with pH of 7 and host (extractant) concentration of 1 mmol/L was obtained and high enantioselectivity (α_op) of 3.86 and performance factor (pf) of 0.1949 were achieved. Chirality 26:79–87, 2014. © 2013 Wiley Periodicals, Inc.     

Enantioselective resolution of 4‐chloromandelic acid by liquid–liquid extraction using 2‐chloro‐N‐carbobenzyloxy‐L‐amino acid

A liquid–liquid extraction resolution of 4‐chloro‐mandelic acid (4‐ClMA) was studied by using 2‐chloro‐N‐carbobenzyloxy‐L‐amino acid (2‐Cl‐Z‐AA) as a chiral extractant. Important factors affecting the extraction efficiency were investigated, including the type of chiral extractant, pH value of aqueous phase, initial concentration of chiral extractant in organic phase, initial concentration of 4‐ClMA in aqueous phase, and resolution temperature. It was observed that the concentration of (R)‐4‐ClMA was much higher than that of (S)‐4‐ClMA in organic phase due to a higher stability of the complex formed between (R)‐4‐ClMA and 2‐Cl‐Z‐AA. A separation factor (α) of 3.05 was obtained at 0.02 mol/L 2‐Cl‐Z‐Valine dissolved in dichloromethane, pH of 2.0, concentration of 4‐ClMA of 0.11 mmol/Land T of 296.7K.     

Experimental and Model Studies on Continuous Separation of 2‐Phenylpropionic Acid Enantiomers by Enantioselective Liquid–Liquid Extraction in Centrifugal Contactor Separators

Multistage enantioselective liquid–liquid extraction (ELLE) of 2‐phenylpropionic acid (2‐PPA) enantiomers using hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) as extractant was studied experimentally in a counter‐current cascade of centrifugal contactor separators (CCSs). Performance of the process was evaluated by purity (enantiomeric excess, ee) and yield (Y). A multistage equilibrium model was established on the basis of single‐stage model for chiral extraction of 2‐PPA enantiomers and the law of mass conservation. A series of experiments on the extract phase/washing phase ratio (W/O ratio), extractant concentration, the pH value of aqueous phase, and the number of stages was conducted to verify the multistage equilibrium model. It was found that model predictions were in good agreement with the experimental results. The model was applied to predict and optimize the symmetrical separation of 2‐PPA enantiomers. The optimal conditions for symmetric separation involves a W/O ratio of 0.6, pH of 2.5, and HP‐β‐CD concentration of 0.1 mol L^?1 at a temperature of 278 K, where ee_eq (equal enantiomeric excess) can reach up to 37% and Y_eq (equal yield) to 69%. By simulation and optimization, the minimum number of stages was evaluated at 98 and 106 for ee_eq > 95% and ee_eq > 97%. Chirality 28:235–244, 2016. © 2016 Wiley Periodicals, Inc. Research highlights are as follows:

相似文献   

Enantioselective liquid‐liquid extraction of 3‐chloro‐phenylglycine enantiomers using (S,S)‐DIOP as extractant

(S,S)‐DIOP, a common catalyst used in asymmetric reaction, was adopted as chiral extractant to separate 3‐chloro‐phenylglycine enantiomers in liquid‐liquid extraction. The factors affecting extraction efficiency were studied, including metal precursors, organic solvents, extraction temperature, chiral extractant concentration, and pH of aqueous phase. (S,S)‐DIOP‐Pd exhibited good ability to recognize 3‐chloro‐phenylglycine enantiomers, and the operational enantioselectivity (α) is 1.836. The highest performance factor (pf) was obtained under the condition of extraction temperature of 9.1°C, (S,S)‐DIOP‐Pd concentration of 1.7 mmol/L, and pH of aqueous phase of 7.0. In addition, the possible recognition mechanism of (S,S)‐DIOP‐Pd towards 3‐chloro‐phenylglycine enantiomers was discussed.     

Indirect synchronous fluorescence spectroscopy and direct high‐performance thin‐layer chromatographic methods for enantioseperation of zopiclone and determination of chiral‐switching eszopiclone: Evaluation of thermodynamic quantities of chromatographic separation

Economic and enantioselective synchronous fluorescence spectroscopy and high‐performance thin‐layer chromatography methods have been developed and validated as per ICH guidelines for the separation of zopiclone enantiomers using L‐(+)‐tartaric acid as a chiral selector, followed by determination of the chiral‐switching eszopiclone. Synchronous fluorescence spectroscopy was successfully applied for chiral recognition of R & S enantiomers of zopiclone at ?λ = 110 nm based on creating of diastereomeric complexes with 0.06M tartaric acid in an aqueous medium containing 0.2M disodium hydrogen orthophosphate. Synchronous fluorescence intensities of eszopiclone were recorded at 296 nm in concentration range 0.2‐ to 4‐μg/mL eszopiclone. High‐performance thin‐layer chromatography method depends on resolution of zopiclone enantiomers on achiral HPTLC silica‐gel plates using acetonitrile:methanol:water (8:2:0.25, v/v/v) containing L‐(+)‐tartaric acid as a chiral mobile‐phase additive followed by densitometric measurements at 304 nm in concentration range of 1 to 10 μg/band of eszopiclone. The effect of chiral‐selector concentration, pH, and temperature on the resolution have been studied and optimized for the proposed methods. The cited procedures were successfully applied to determine eszopiclone in commercial tablets of pure and racemic forms. Enantiomeric excess was evaluated using optical purity test and integrated peak area to describe the enantiomeric ratio. Thermodynamics of chromatographic separation, enthalpy, and entropy were evaluated using the Van't Hoff equation. The proposed methods were found to be selective for identification and determination of the eutomer in drug substances and products.     

Enantioselective Degradation of the Chiral Fungicides Metalaxyl and Furalaxyl by Brevibacillus brevis

For almost four decades, the chiral fungicides metalaxyl and furalaxyl have been in use in plant protection on a global scale. Both substances are distributed as racemic mixtures, yet the desirable interference in nucleic acid synthesis of harmful fungi only occurs by the (‐)‐R‐enantiomer. As enantioselective degradation in Scheyern (Germany) and Yaoundé (Cameroon) soils has been documented, the influence of 50 isolated microorganisms on the R/S ratio was investigated. A high‐pressure liquid chromatography method with a chiral column to separate enantiomers of metalaxyl and furalaxyl, and subsequent detection by tandem mass spectrometry, was employed. Only one of these microorganisms, a strain of Brevibacillus brevis, showed an enantioselective degradation pattern in liquid culture; the respective (‐)‐R‐enantiomers were preferably degraded. Moreover, (‐)‐R‐furalaxyl was degraded faster in cultures supplemented simultaneously with both fungicides of the same concentration. Chirality 25:336–340, 2013. © 2013 Wiley‐Liss Inc. Chirality 00:000‐000:, 2013. © 2013 Wiley Periodicals, Inc.     

Strategy Approach for Direct Enantioseparation of Hyoscyamine Sulfate and Zopiclone on a Chiral αl‐Acid Glycoprotein Column and Determination of Their Eutomers: Thermodynamic Study of Complexation

Rapid and simple isocratic high‐performance liquid chromatographic methods with UV detection were developed and validated for the direct resolution of racemic mixtures of hyoscyamine sulfate and zopiclone. The method involved the use of α_l‐acid glycoprotein (AGP) as chiral stationary phase. The stereochemical separation factor (?) and the stereochemical resolution factor (R_s) obtained were 1.29 and 1.60 for hyoscyamine sulfate and 1.47 and 2.45 for zopiclone, respectively. The method was used for determination of chiral switching (eutomer) isomers: S‐hyoscyamine sulfate and eszopiclone. Several mobile phase parameters were investigated for controlling enantioselective retention and resolution on the chiral AGP column. The influence of mobile phase, concentration and type of uncharged organic modifier, ionic strength, and column temperature on enantioselectivity were studied. Calibration curves were linear in the ranges of 1–10 µg mL^‐1 and 0.5–5 µg mL^‐1 for S‐hyoscyamine sulfate and eszopiclone, respectively. The method is specific and sensitive, with lower limits of detection and quantifications of 0.156, 0.515 and 0.106, 0.349 for S‐hyoscyamine sulfate and eszopiclone, respectively. The method was used to identify quantitatively the enantiomers profile of the racemic mixtures of the studied drugs in their pharmaceutical preparations. Thermodynamic studies were performed to calculate the enthalpic ΔH and entropic ΔS terms. The results showed that enantiomer separation of the studied drugs were an enthalpic process. Chirality 28:49–57, 2016. © 2015 Wiley Periodicals, Inc.     

Fractional Reactive Extraction for Symmetrical Separation of 4‐Nitro‐D,L‐Phenylalanine in Centrifugal Contactor Separators: Experiments and Modeling

The enantioselective liquid–liquid extraction of 4‐nitro‐D,L‐phenylalanine (D,L‐Nphy) using PdCl₂{(s)‐BINAP} as extractant in dichloroethane was studied experimentally in a countercurrent cascade of 10 centrifugal contactor separators (CCSs) at 5°C, involving flow ratio, extractant concentration, and Cl^? concentration. The steady‐state enantiomeric excess (ee) in both stream exits was 90.86% at a 93.29% yield. The predicted value was modeled using an equilibrium stage approach. The correlation between model and experiment was satisfactory. The model was applied to optimize the production of both enantiomers in >97% ee and >99% ee. 14 stages and 16 stages are required for 97% ee and 99% ee for both enantiomers, respectively. Chirality 27:75–81, 2015. © 2014 Wiley Periodicals, Inc.     

Enantioseparation of Racemic Flurbiprofen by Aqueous Two‐Phase Extraction With Binary Chiral Selectors of L‐dioctyl Tartrate and L‐tryptophan

A novel method for chiral separation of flurbiprofen enantiomers was developed using aqueous two‐phase extraction (ATPE) coupled with biphasic recognition chiral extraction (BRCE). An aqueous two‐phase system (ATPS) was used as an extracting solvent which was composed of ethanol (35.0% w/w) and ammonium sulfate (18.0% w/w). The chiral selectors in ATPS for BRCE consideration were L‐dioctyl tartrate and L‐tryptophan, which were screened from amino acids, β‐cyclodextrin derivatives, and L‐tartrate esters. Factors such as the amounts of L‐dioctyl tartrate and L‐tryptophan, pH, flurbiprofen concentration, and the operation temperature were investigated in terms of chiral separation of flurbiprofen enantiomers. The optimum conditions were as follows: L‐dioctyl tartrate, 80 mg; L‐tryptophan, 40 mg; pH, 4.0; flurbiprofen concentration, 0.10 mmol/L; and temperature, 25 °C. The maximum separation factor α for flurbiprofen enantiomers could reach 2.34. The mechanism of chiral separation of flurbiprofen enantiomers is discussed and studied. The results showed that synergistic extraction has been established by L‐dioctyl tartrate and L‐tryptophan, which enantioselectively recognized R‐ and S‐enantiomers in top and bottom phases, respectively. Compared to conventional liquid–liquid extraction, ATPE coupled with BRCE possessed higher separation efficiency and enantioselectivity without the use of any other organic solvents. The proposed method is a potential and powerful alternative to conventional extraction for separation of various enantiomers. Chirality 27:650–657, 2015. © 2015 Wiley Periodicals, Inc.     

A New Chiral Residue Analysis Method for Triazole Fungicides in Water Using Dispersive Liquid‐Liquid Microextraction (DLLME)

A rapid, simple, reliable, and environment‐friendly method for the residue analysis of the enantiomers of four chiral fungicides including hexaconazole, triadimefon, tebuconazole, and penconazole in water samples was developed by dispersive liquid–liquid microextraction (DLLME) pretreatment followed by chiral high‐performance liquid chromatography (HPLC)‐DAD detection. The enantiomers were separated on a Chiralpak IC column by HPLC applying n‐hexane or petroleum ether as mobile phase and ethanol or isopropanol as modifier. The influences of mobile phase composition and temperature on the resolution were investigated and most of the enantiomers could be completely separated in 20 min under optimized conditions. The thermodynamic parameters indicated that the separation was enthalpy‐driven. The elution orders were detected by both circular dichroism detector (CD) and optical rotatory dispersion detector (ORD). Parameters affecting the DLLME performance for pretreatment of the chiral fungicides residue in water samples, such as the extraction and dispersive solvents and their volume, were studied and optimized. Under the optimum microextraction condition the enrichment factors were over 121 and the linearities were 30–1500 µg L^?1 with the correlation coefficients (R²) over 0.9988 and the recoveries were between 88.7% and 103.7% at the spiking levels of 0.5, 0.25, and 0.05 mg L^?1(for each enantiomer) with relative standard deviations varying from 1.38% to 6.70% (n = 6) The limits of detection (LODs) ranged from 8.5 to 29.0 µg L^?1(S/N = 3). Chirality 25:567‐574, 2013. © 2013 Wiley Periodicals, Inc.     

Enantioseparation of Mandelic Acid Enantiomers With Magnetic Nano‐Sorbent Modified by a Chiral Selector

In this study, R(+)‐α‐methylbenzylamine‐modified magnetic chiral sorbent was synthesized and assessed as a new enantioselective solid phase sorbent for separation of mandelic acid enantiomers from aqueous solutions. The chemical structures and magnetic properties of the new sorbent were characterized by vibrating sample magnetometry, transmission electron microscopy, Fourier transform infrared spectroscopy, and dynamic light scattering. The effects of different variables such as the initial concentration of racemic mandelic acid, dosage of sorbent, and contact time upon sorption characteristics of mandelic acid enantiomers on magnetic chiral sorbent were investigated. The sorption of mandelic acid enantiomers followed a pseudo‐second‐order reaction and equilibrium experiments were well fitted to a Langmuir isotherm model. The maximum adsorption capacity of racemic mandelic acid on to the magnetic chiral sorbent was found to be 405 mg g^?1. The magnetic chiral sorbent has a greater affinity for (S)‐(+)‐mandelic acid compared to (R)‐(?)‐mandelic acid. The optimum resolution was achieved with 10 mL 30 mM of racemic mandelic acid and 110 mg of magnetic chiral sorbent. The best percent enantiomeric excess values (up to 64%) were obtained by use of a chiralpak AD‐H column. Chirality 27:835–842, 2015. © 2015 Wiley Periodicals, Inc.     

Enantioselective liquid‐liquid extraction of DL‐mandelic acid using chiral diphosphine ligands as extractants

In order to expand the application range of chiral diphosphine ligands, (S)‐BINAP, (S)‐SEGPHOS, and (S)‐MeO‐BIPHEP were employed as extractants to recognize DL‐mandelic acid. The results indicated that (S)‐SEGPHOS‐Cu exhibited considerable ability to recognize DL‐mandelic acid with operational enantioselectivity (α) of 2.677. The process of extraction of DL‐mandelic acid using (S)‐SEGPHOS‐Cu as extractant was systematically investigated. Performance factor (pf) was adopted to comprehensively evaluate the extraction. After optimization by response surface methodology (RSM), the optimal extraction condition is temperature of 5.5°C, (S)‐SEGPHOS‐Cu concentration of 3.0 mmol/L, and pH of 8.0. And the predicted and experimental maximum values of pf were 0.26374 and 0.26839, respectively.     

Chiral Separation of the Clinically Important Compounds Fucose and Pipecolic Acid Using CE: Determination of the Most Effective Chiral Selector

In this study, simple electrophoretic methods were developed for the chiral separation of the clinically important compounds fucose and pipecolic acid. In recent years, these analytes, and particularly their individual enantiomers, have attracted considerable attention due to their role in biological functions and disorders. The detectability and sensitivity of pipecolic acid and fucose were improved by reacting them with fluorenylmethyloxycarbonyl chloride (FMOC‐Cl) and 5‐amino‐2‐naphthalene‐sulfonic acid (ANSA), respectively. The enantioseparation conditions were optimized by initially investigating the type of the chiral selector. Different chiral selectors, such as polymeric surfactants and cyclodextrins, were used and the most effective ones were determined with regard to resolution and analysis time. A 10‐mM β‐cyclodextrin was able to separate the enantiomers of ANSA‐DL‐fucose and the polymeric surfactant poly(sodium N‐undecanoyl‐LL‐leucine‐valinate) was able to separate the enantiomers of FMOC‐DL‐pipecolic acid, with resolution values of 3.45 and 2.78, respectively. Additional parameters, such as the concentration and the pH of the background electrolyte (BGE), the concentration of the chiral selector, and the addition of modifiers were examined in order to optimize the separations. The addition of the chiral ionic liquid D‐alanine tert‐butyl ester lactate into the BGE was also investigated, for the first time, in order to improve resolution of the enantiomers. Chirality 25:556–560, 2013. © 2013 Wiley Periodicals, Inc.     

Preparative Enantioseparation of β‐Substituted‐2‐Phenylpropionic Acids by Countercurrent Chromatography With Substituted β‐Cyclodextrin as Chiral Selectors

Preparative enantioseparation of four β‐substituted‐2‐phenylpropionic acids was performed by countercurrent chromatography with substituted β‐cyclodextrin as chiral selectors. The two‐phase solvent system was composed of n‐hexane‐ethyl acetate‐0.10 mol L‐1 of phosphate buffer solution at pH 2.67 containing 0.10 mol L^‐1 of hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) or sulfobutylether‐β‐cyclodextrin (SBE‐β‐CD). The influence factors, including the type of substituted β‐cyclodextrin, composition of organic phase, concentration of chiral selector, pH value of the aqueous phase, and equilibrium temperature were optimized by enantioselective liquid–liquid extraction. Under the optimum separation conditions, 100 mg of 2‐phenylbutyric acid, 100 mg of tropic acid, and 50 mg of 2,3‐diphenylpropionic acid were successfully enantioseparated by high‐speed countercurrent chromatography, and the recovery of the (±)‐enantiomers was in the range of 90–91% for (±)‐2‐phenylbutyric acid, 91–92% for (±)‐tropic acid, 85–87% for (±)‐2,3‐diphenylpropionic acid with purity of over 97%, 96%, and 98%, respectively. The formation of 1:1 stoichiometric inclusion complex of β‐substituted‐2‐phenylpropionic acids with HP‐β‐CD was determined by UV spectrophotometry and the inclusion constants were calculated by a modified Benesi‐Hildebrand equation. The results showed that different enantioselectivities among different racemates were mainly caused by different enantiorecognition between each enantiomer and HP‐β‐CD, while it might be partially caused by different inclusion capacity between racemic solutes and HP‐β‐CD. Chirality 27:795–801, 2015. © 2015 Wiley Periodicals, Inc.     

Analysis of Oxcarbazepine and the 10‐Hydroxycarbazepine Enantiomers in Plasma by LC‐MS/MS: Application in a Pharmacokinetic Study

Oxcarbazepine is a second‐generation antiepileptic drug indicated as monotherapy or adjunctive therapy in the treatment of partial seizures or generalized tonic–clonic seizures in adults and children. It undergoes rapid presystemic reduction with formation of the active metabolite 10‐hydroxycarbazepine (MHD), which has a chiral center at position 10, with the enantiomers (S)‐(+)‐ and R‐(?)‐MHD showing similar antiepileptic effects. This study presents the development and validation of a method of sequential analysis of oxcarbazepine and MHD enantiomers in plasma using liquid chromatography with tandem mass spectrometry (LC‐MS/MS). Aliquots of 100 μL of plasma were extracted with a mixture of methyl tert‐butyl ether: dichloromethane (2:1). The separation of oxcarbazepine and the MHD enantiomers was obtained on a chiral phase Chiralcel OD‐H column, using a mixture of hexane:ethanol:isopropanol (80:15:5, v/v/v) as mobile phase at a flow rate of 1.3 mL/min with a split ratio of 1:5, and quantification was performed by LC‐MS/MS. The limit of quantification was 12.5 ng oxcarbazepine and 31.25 ng of each MHD enantiomer/mL of plasma. The method was applied in the study of kinetic disposition of oxcarbazepine and the MHD enantiomers in the steady state after oral administration of 300 mg/12 h oxcarbazepine in a healthy volunteer. The maximum plasma concentration of oxcarbazepine was 1.2 µg/mL at 0.75 h. The kinetic disposition of MHD is enantioselective, with a higher proportion of the S‐(+)‐MHD enantiomer compared to R‐(?)‐MHD and an AUC^0‐12 _{S‐(+)/R‐(?)} ratio of 5.44. Chirality 25:897–903, 2013. © 2013 Wiley Periodicals, Inc.     

Solid‐phase extraction with metal–organic frameworks for the analysis of chiral compounds

Metal–organic frameworks (MOFs) are excellent porous materials with nanoscale cavities and high surface areas, which make them promising as novel adsorbents in solid‐phase extraction (SPE). In this article we report a new application of the chiral MOF [Zn₂(D‐Cam)₂(4,4′‐bpy)]_n in SPE used for the measurement of the enantiomeric excess (ee) of (±)‐1,1′‐bi‐2‐naphthol. Several important experimental parameters that may influence the extraction efficiency were investigated and optimized. Under the optimum conditions, a good linearity (R² > 0.999) was found between the ee value and the reciprocal of the peak areas. When compared with the actual ee measured using chiral HPLC, the SPE‐based assay also showed good accuracy and precision. The results showed that SPE based on chiral MOFs as adsorbents is a simple and effective method for the determination of the ee values of chiral compounds.     

Synthesis of new C3 symmetric amino acid‐ and aminoalcohol‐containing chiral stationary phases and application to HPLC enantioseparations

We recently reported a new C3‐symmetric (R)‐phenylglycinol N‐1,3,5‐benzenetricarboxylic acid‐derived chiral high‐performance liquid chromatography (HPLC) stationary phase (CSP 1) that demonstrated better results as compared to a previously described N‐3,5‐dintrobenzoyl (DNB) (R)‐phenylglycinol‐derived CSP. Over a decade ago, (S)‐leucinol, (R)‐phenylglycine, and (S)‐leucine derivatives were used as the starting materials of 3,5‐DNB‐based Pirkle‐type CSPs for chiral separation. In this study, three new C3‐symmetric CSPs (CSP 2, 3, and 4) were prepared by combining the ideas and results mentioned above. Here we describe the synthetic procedures and applications of the new C3‐symmetric CSPs (CSP 2–CSP 4).     

Stereoselective Toxicity and Metabolism of Lactofen in Primary Hepatocytes From Rat

The stereoselective metabolism of lactofen in primary rat hepatocytes was studied using a chiral high‐performance liquid chromatographic (HPLC) method. Rac‐lactofen and its two enantiomers, S‐(+)‐ and R‐(?)‐lactofen, as well as two of its major metabolites, acifluorfen, S‐(+)‐ and R‐(?)‐desethyl lactofen, were used as substrates,. The single and joint cytotoxicity of parent compounds and the metabolites were assessed by coincubation with rat hepatocytes as target cells. Cytotoxicity was determined by the methyl tetrazolium (MTT) assay. In hepatocyte incubations, S‐(+)‐lactofen was degraded more rapidly than R‐(?)‐lactofen, and a stereospecific formation of S‐(+)‐desethyl lactofen was detected. Metabolism of lactofen to desethyl lactofen was processed with the retention of configuration, and the achiral compound, acifluorfen, was the shared metabolite generated from both S‐(+)‐ and R‐(?)‐lactofen. There was no chiral conversion of lactofen or desethyl lactofen enantiomers during the incubation. For the cytotoxicity research, the calculated EC₅₀ values indicated that when being applied individually, the parent compound was less toxic than its metabolites, while the combination with metabolites enhanced its cytotoxic effects. The data presented here would be helpful for a more comprehensive assessment of the ecotoxicological and environmental risks of lactofen. Chirality 25:743–750, 2013. © 2013 Wiley Periodicals, Inc.     

Effect of Chromatographic Conditions on Enantioseparation of Bovine Serum Albumin Chiral Stationary Phase in HPLC and Thermodynamic Studies

Twelve chiral compounds were enantiomerically resolved on bovine serum albumin chiral stationary phase (BSA‐CSP) by high‐performance liquid chromatography (HPLC) in reversed‐phase modes. Chromatographic conditions such as mobile phase pH, the percentage of organic modifier, and concentration of analyte were optimized for separation of enantiomers. For N‐(2, 4‐dinitrophenyl)‐serine (DNP‐ser), the retention factors (k) greatly increase from 0.81 to 6.23 as the pH decreasing from 7.21 to 5.14, and the resolution factor (R_s) exhibited a similar increasing trend (from 0 to 1.34). More interestingly, the retention factors for N‐(2, 4‐dinitrophenyl)‐proline (DNP‐pro) decrease along with increasing 1‐propanol in mobile phase (3%, 5%, 7% and 9% by volume), whereas the resolution factor shows an upward trend (from 0.96 to 2.04). Moreover, chiral recognition mechanisms for chiral analytes were further investigated through thermodynamic methods. Chirality 25:487–492, 2013. © 2013 Wiley Periodicals, Inc.     

An Insight to Chiral Monolith for Enantioselective Nano and Micro HPLC: Preparation and Applications

This review gives an overview of chiral separation principles and their application in enantioselective nano/micro high performance liquid chromatography (n/μ‐HPLC) using chiral monolith. In particular, developments in silica and polymer chiral monolithic stationary phases are presented. The preparation and applications of chiral monoliths, the basic chiral separation principles and the mechanisms are discussed. Chirality 25:314–323, 2013. © 2013 Wiley Periodicals, Inc.