Evolution of ontogenetic allometry shaping giant species: a case study from the damselfish genus Dascyllus (Pomacentridae)

The evolution of body size, the paired phenomena of giantism and dwarfism, has long been studied by biologists and paleontologists. However, detailed investigations devoted to the study of the evolution of ontogenetic patterns shaping giant species are scarce. The damselfishes of the genus Dascyllus appear as an excellent model for such a study. Their well understood phylogeny reveals that large‐bodied species have evolved in two different clades. Geometric morphometric methods were used to compare the ontogenetic trajectories of the neurocranium and the mandible in both small‐bodied (Dascyllus aruanus and Dascyllus carneus; maximum size: 50–65 mm standard length) and giant (Dascyllus trimaculatus and Dascyllus flavicaudus; maximum size: 90–110 mm standard length) Dascyllus species. At their respective maximum body size, the neurocranium of the giant species is significantly shorter and have a higher supraoccipital crest relative to the small‐bodied species, whereas mandible shape variation is more limited and is not related to the ‘giant’ trait. The hypothesis of ontogenetic scaling whereby the giant species evolved by extending the allometric trajectory of the small‐bodied ones (i.e. hypermorphosis) is rejected. Instead, the allometric trajectories vary among species by lateral transpositions. The rate of shape changes and the type of lateral transposition also differ according to the skeletal unit among Dascyllus species. Differences seen between the two giant species in the present study demonstrate that giant species may appear by varied alterations of the ancestor allometric pattern. © 2010 The Linnean Society of London, Biological Journal of the Linnean Society, 2010, 99 , 99–117.     

Comparative trophic morphology in eight species of damselfishes (Pomacentridae)

Damselfishes show significant biodiversity in the coral reefs. To better understand such diversity, an ecomorphological approach was investigated in the trophic morphology of eight species of Pomacentridae (Chromis acares, C. margaritifer, Dascyllus aruanus, D. flavicaudus, Pomacentrus pavo, Plectroglyphidodon johnstonianus, Pl. lacrymatus and Stegastes nigricans) belonging to different trophic guilds (zooplankton, algal, coral polyp feeders and omnivores). Geometric morphometrics were used to quantify size and shape variations in four skeletal units: (1) neurocranium, (2) suspensorium and opercle, (3) mandible and (4) premaxilla. This method allowed us to reveal shape and size differences correlated to functional diversity both within and between trophic guilds. Among zooplanktivores, C. margaritifer, D. aruanus and D. flavicaudus have a high and long supraoccipital crest, short mandibles forming a small mouth and high suspensoria and opercles. These three species can be considered to be suction feeders. In the same guild, C. acares shows opposite characteristics (long and thin mandibles, lengthened neurocranium and suspensorium) and can be considered as a ram feeder. Among herbivores and corallivores, the two species of Plectroglyphidodon and S. nigricans can be considered as grazers. Differences in skeletal shape are mainly related to improving the robustness of some skeletal parts (broad hyomandibular, short and high mandibles). The shapes of P. pavo, which feeds largely on algae, strongly differ from that of the other three grazers exhibiting similar morphological characteristics to C. acares (e.g., long and shallow suspensorium, lengthened neurocranium). This highlights likely differences concerning cutting or scraping method. Finally, no strong correlations exist between size and shapes in the eight studied species. Size difference among species having a very similar shape could be viewed as a factor optimizing resource partitioning.     

Bipartite life cycle of coral reef fishes promotes increasing shape disparity of the head skeleton during ontogeny: an example from damselfishes (Pomacentridae)

Background  

Quantitative studies of the variation of disparity during ontogeny exhibited by the radiation of coral reef fishes are lacking. Such studies dealing with the variation of disparity, i.e. the diversity of organic form, over ontogeny could be a first step in detecting evolutionary mechanisms in these fishes. The damselfishes (Pomacentridae) have a bipartite life-cycle, as do the majority of demersal coral reef fishes. During their pelagic dispersion phase, all larvae feed on planktonic prey. On the other hand, juveniles and adults associated with the coral reef environment show a higher diversity of diets. Using geometric morphometrics, we study the ontogenetic dynamic of shape disparity of different head skeletal units (neurocranium, suspensorium and opercle, mandible and premaxilla) in this fish family. We expected that larvae of different species might be relatively similar in shapes. Alternatively, specialization may become notable even in the juvenile and adult phase.     

Feeding mechanics of teleost fishes (Labridae; Perciformes): A test of four-bar linkage models

The feeding mechanisms of two labrid fishes (Cheilinus chlorurus and C. diagrammus: Labridae: Perciformes) are modeled using four-bar linkage theory from mechanical engineering. The actions of the feeding mechanisms are simulated by a computer program that uses morphometric data to calculate the geometry of mechanism structure. The predictions of three different four-bar linkages regarding the kinematics of feeding are compared to the movements observed through hign speed (200 fps) cinematography. A previously unidentified four-bar chain was found to be an accurate model of the mechanism by which upper jaw protrusion, maxillary rotation, and gape increase occur in Cheilinus. This mechanism involves the anterior jaws including the mandible, maxilla, premaxilla, palatine, and suspensorium. The accuracy of two previously described four-bar linkages was also tested by comparison of model predictions and film results. The opercular linkage proposed by Anker ('74) as a mechanism of jaw depression via opercular levation was found to be a poor predictor of feeding movements. This four-bar chain involves the opercle, suspensorium, interopercle, and mandible. Muller ('87) proposed a mechanism of hyoid depression involving cranial elevation due to epaxial muscle contraction as input motion The links in this mechanism include the neurocranium and hyomandibula, hyoid, sternohyoideus muscle, and pectoral girdle. This model was an accurate predictor of hyoid depression in Cheilinus when simultaneous cranial elevation and sternohyoideus contraction were simulated. Quantitative kinematic models involve simplifying assumptions when applied to complex musculoskeletal systems, but such models have a wide range of applications to vertebrate functional morphology.     

Postmetamorphic ontogenetic allometry and the evolution of skull shape in Nest‐building frogs Leptodactylus (Anura: Leptodactylidae)

Allometry constitutes an important source of morphological variation. However, its influence in head development in anurans has been poorly explored. By using geometric morphometrics followed by statistical and comparative methods we analyzed patterns of allometric change during cranial postmetamorphic ontogeny in species of Nest‐building frogs Leptodactylus (Leptodactylidae). We found that the anuran skull is not a static structure, and allometry plays an important role in defining its shape in this group. Similar to other groups with biphasic life‐cycle, and following a general trend in vertebrates, ontogenetic changes mostly involve rearrangement in rostral, otoccipital, and suspensorium regions. Ontogenetic transformations are paralleled by shape changes associated with evolutionary change in size, such that the skulls of species of different intrageneric groups are scaled to each other, and small and large species show patterns of paedomorphic/peramorphic features, respectively. Allometric trajectories producing those phenotypes are highly evolvable though, with shape change direction and magnitude varying widely among clades, and irrespective of changes in absolute body size. These results reinforce the importance of large‐scale comparisons of growth patterns to understand the plasticity, evolution, and polarity of morphological changes in different clades.     

Post-natal ontogeny of the mandible and ventral cranium in <Emphasis Type="Italic">Marmota</Emphasis> species (Rodentia,Sciuridae): allometry and phylogeny

Post-natal ontogenetic variation of the marmot mandible and ventral cranium is investigated in two species of the subgenus Petromarmota (M. caligata, M. flaviventris) and four species of the subgenus Marmota (M. caudata, M. himalayana, M. marmota, M. monax). Relationships between size and shape are analysed using geometric morphometric techniques. Sexual dimorphism is negligible, allometry explains the main changes in shape during growth, and males and females manifest similar allometric trajectories. Anatomical regions affected by size-related shape variation are similar in different species, but allometric trajectories are divergent. The largest modifications of the mandible and ventral cranium occur in regions directly involved in the mechanics of mastication. Relative to other anatomical regions, the size of areas of muscle insertion increases, while the size of sense organs, nerves and teeth generally decreases. Epigenetic factors, developmental constraints and size variation were found to be the major contributors in producing the observed allometric patterns. A phylogenetic signal was not evident in the comparison of allometric trajectories, but traits that allow discrimination of the Palaearctic marmots from the Nearctic species of Petromarmota are present early in development and are conserved during post-natal ontogeny.     

Electric fishes of the genus Sternarchorhynchus (Teleostei,Ostariophysi, Gymnotiformes); phylogenetic and revisionary studies

Analysis of 88 characters of external and internal body systems yielded a phylogenetic reconstruction of the Neotropical electric knifefish genus Sternarchorhynchus (Apteronotidae; Gymnotiformes). The results support a hypothesis of Sternarchorhynchus as the sister group to Platyurosternarchus. A series of synapomorphies, many involving major innovations of the neurocranium, jaws, suspensorium, and associated systems that permit an unusual mode of grasp‐suction feeding, support the monophyly of both genera. Synapomorphies largely resolve relationships within Sternarchorhynchus with basal nodes strongly supported by characters pertinent to prey capture and initial processing of food items. These possible key innovations may provide Sternarchorhynchus with a competitive advantage over other clades of the Apteronotidae and account for the species diversity of the genus in Neotropical rivers. Adaptive radiation in Sternarchorhynchus was analysed. Habitat preference transitions repeatedly occurred in the genus between deep‐river channel dwelling species and rheophilic species with preferences for higher energy setting including rapids and swift‐flowing fluviatile settings. Twenty‐two species of Sternarchorhynchus are described as new based on samples that originated in the smaller rivers draining into the Golfo de Paria, the Marowijne and Essequibo River basins, the Río Orinoco and in particular the Amazon River basin. The 32 species in Sternarchorhynchus make it the most speciose genus in the Apteronotidae. No claim to original US government works. Journal compilation © 2010 The Linnean Society of London, Zoological Journal of the Linnean Society, 2010, 159 , 223–371.     

Ontogeny of skull size and shape changes within a framework of biphasic lifestyle: a case study in six <Emphasis Type="Italic">Triturus</Emphasis> species (Amphibia,Salamandridae)

As with many other amphibians, Triturus species are characterized by a biphasic life cycle with abrupt changes in the cranial skeleton during metamorphosis. The post-metamorphic shape changes of the cranial skeleton were investigated using geometric morphometric techniques in six species: Triturus alpestris, T. vulgaris, T. dobrogicus, T. cristatus, T. carnifex, and T. karelinii. The comparative analysis of ontogenetic trajectories revealed that these species have a conserved developmental rate with divergent ontogenetic trajectories of the ventral skull shape that mainly reflect phylogenetic relatedness. A striking exception in the ontogenetic pattern was possibly found in T. dobrogicus, characterized by a marked increase in the developmental rate compared to the other newt species. The size-related shape changes explained a large proportion of shape change during post-metamorphic growth within each species, with marked positive allometric growth of skull elements related to foraging.     

Patterns of cranial ontogeny in lacertid lizards: morphological and allometric disparity

We explored the ontogenetic dynamics of the morphological and allometric disparity in the cranium shapes of twelve lacertid lizard species. The analysed species (Darevskia praticola, Dinarolacerta mosorensis, Iberolacerta horvathi, Lacerta agilis, L. trilineata, L. viridis, Podarcis erhardii, P. melisellensis, P. muralis, P. sicula, P. taurica and Zootoca vivipara) can be classified into different ecomorphs: terrestrial lizards that inhabit vegetated habitats (habitats with lush or sparse vegetation), saxicolous and shrub‐climbing lizards. We observed that there was an overall increase in the morphological disparity (MD) during the ontogeny of the lacertid lizards. The ventral cranium, which is involved in the mechanics of jaw movement and feeding, showed higher levels of MD, an ontogenetic shift in the morphospace planes and more variable allometric patterns than more conserved dorsal crania. With respect to ecology, the allometric trajectories of the shrub‐climbing species tended to cluster together, whereas the allometric trajectories of the saxicolous species were highly dispersed. Our results indicate that the ontogenetic patterns of morphological and allometric disparity in the lacertid lizards are modified by ecology and functional constraints and that the identical mechanisms that lead to intraspecific morphological variation also produce morphological divergence at higher taxonomic levels.     

Evolution of ontogeny in the hippopotamus skull: using allometry to dissect developmental change

Allometry describes the effect of size change on aspects of an organism's form and can be used to summarize the developmental history of growing parts of an animal. By comparing how allometric growth differs between species, it is possible to reveal differences in their pathways of development. The ability to compare and categorize developmental change between species is demonstrated here using morphometric methods. This involves the interspecific statistical comparison of a large number of bivariate relationships that summarize ontogenetic trajectories. These linear ontogenetic trajectories can be modified as they evolve in any of three ways: ontogenetic scaling indicative of change in the duration of growth, lateral shifts indicative of changes in prenatal development, and directional change indicative of novel modes of postnatal growth. I apply this analysis to skulls of the common hippopotamus ( Hippopotamus amphibius ) and the pygmy hippopotamus ( Hexaprotodon liberiensis ). The number of allometric changes falling into each category was statistically determined and Jolicoeur's multivariate generalization of simple allometry was used to provide an overview of cranial variation. For these skulls, directional change was not found to be statistically significant, but ontogenetic scaling and lateral shifts were both common. This indicates that conserved patterns of growth covariance (ontogenetic scaling) can be separated from novel or derived patterns (directional change and/or lateral shifts). This study demonstrates that He. liberiensis is not simply an ontogenetically scaled version of its larger relative. The evolutionary implications of allometric growth variation are discussed in the light of these findings and those of other studies.  © 2003 The Linnean Society of London, Biological Journal of the Linnean Society , 2003, 80 , 625–638.     

Mandibular shape correlates of tooth fracture in extant Carnivora: implications to inferring feeding behaviour of Pleistocene predators

Percentages of tooth fracture and mandible shape are robust predictors of feeding habits in Carnivora. If these parameters co‐vary above the species level, more robust palaeobiological inferences could be made on fossil species. A test of association is presented between mandible shape and tooth fracture in a subset of extant carnivorans together with large Pleistocene fossil predators from Rancho La Brea (Canis dirus, Panthera atrox, and Smilodon fatalis). Partial least square (PLS) and comparative methods are employed to validate co‐variation of these two parameters in extant carnivorans. Association between mandible shape and percentage of tooth fracture is strongly supported, even if both blocks of data exhibit a phylogenetic signal to a different degree. Dietary adaptations drive shape/fracture co‐variation in extant species, although no significant differences occur in the PLS scores between carnivores and bone/hard food consumers. The fossil species project into PLS morphospace as outliers. Their position suggests a unique feeding behaviour. The increase in the size of prey, together with consumption of skin and hair from carcasses in a cold environment, might have generated unusual tooth breakage patterns in large predators from Rancho La Brea. © 2012 The Linnean Society of London, Biological Journal of the Linnean Society, 2012, 106 , 70–80.     

The utility of cranial ontogeny for phylogenetic inference: a case study in crocodylians using geometric morphometrics

The degree to which the ontogeny of organisms could facilitate our understanding of phylogenetic relationships has long been a subject of contention in evolutionary biology. The famed notion that ‘ontogeny recapitulates phylogeny’ has been largely discredited, but there remains an expectation that closely related organisms undergo similar morphological transformations throughout ontogeny. To test this assumption, we used three‐dimensional geometric morphometric methods to characterize the cranial morphology of 10 extant crocodylian species and construct allometric trajectories that model the post‐natal ontogenetic shape changes. Using time‐calibrated molecular and morphological trees, we employed a suite of comparative phylogenetic methods to assess the extent of phylogenetic signal in these trajectories. All analyses largely demonstrated a lack of significant phylogenetic signal, indicating that ontogenetic shape changes contain little phylogenetic information. Notably, some Mantel tests yielded marginally significant results when analysed with the morphological tree, which suggest that the underlying signal in these trajectories is correlated with similarities in the adult cranial morphology. However, despite these instances, all other analyses, including more powerful tests for phylogenetic signal, recovered statistical and visual evidence against the assumption that similarities in ontogenetic shape changes are commensurate with phylogenetic relatedness and thus bring into question the efficacy of using allometric trajectories for phylogenetic inference.     

Plasticity of ontogenetic trajectories in cyprinids: a source of evolutionary novelties

Research in evolutionary developmental (evo‐devo) biology is making an increasingly important contribution to our understanding of the molecular mechanisms underlying the establishment of complex morphological traits. Deciphering the ontogenetic trajectories leading to the differentiation of sister species (and the existence of hybrids) is a new challenge in our understanding of speciation processes. In the present study, we characterized the ontogenetic trajectory of lower lip morphology in two cyprinid species and their hybrids. Chondrostoma toxostoma has an arched lower lip and a generalist diet. Chondrostoma nasus has a straight lower lip and a specialist diet. An analysis of 99 C. toxostoma, 99 C. nasus and 25 first‐generation (F₁) hybrid individuals demonstrated that the difference between arched and straight lip morphology was found to depend strongly on the height/width ratio of the lower lip. A comparison of the ontogenetic trajectories of these morphometric traits showed that the height of the lower lip was isometric to body length in both species, whereas developmental changes involving an acceleration and a hypermorphosis of the widening of the lower lip led to a straight lip morphology in C. nasus. F₁ hybrids were characterized by an extreme phenotype resulting from a rate of lower lip widening slower than that in the two parent species. Therefore, we rejected a codominance hypothesis and concluded that the first stage of hybridization provides the foundations of evolutionary novelty. These results have important evolutionary implications because lower lip shape is linked to dietary behaviour in many fish species. © 2012 The Linnean Society of London, Biological Journal of the Linnean Society, 2012, 106 , 342–355.     

Ontogeny of robusticity of craniofacial traits in modern humans: A study of South American populations

To date, differences in craniofacial robusticity among modern and fossil humans have been primarily addressed by analyzing adult individuals; thus, the developmental basis of such differentiation remains poorly understood. This article aims to analyze the ontogenetic development of craniofacial robusticity in human populations from South America. Geometric morphometric methods were used to describe cranial traits in lateral view by using landmarks and semilandmarks. We compare the patterns of variation among populations obtained with subadults and adults to determine whether population‐specific differences are evident at early postnatal ontogeny, compare ontogenetic allometric trajectories to ascertain whether changes in the ontogeny of shape contribute to the differentiation of adult morphologies, and estimate the amount of size change that occurs during growth along each population‐specific trajectory. The results obtained indicate that the pattern of interpopulation variation in shape and size is already established at the age of 5 years, meaning that processes acting early during ontogeny contribute to the adult variation. The ontogenetic allometric trajectories are not parallel among all samples, suggesting the divergence in the size‐related shape changes. Finally, the extension of ontogenetic trajectories also seems to contribute to shape variation observed among adults. Am J Phys Anthropol 2010. © 2009 Wiley‐Liss, Inc.     

Ontogenetic relationships between cranium and mandible in coyotes and hyenas

Developing animals must resolve the conflicting demands of survival and growth, ensuring that they can function as infants or juveniles while developing toward their adult form. In the case of the mammalian skull, the cranium and mandible must maintain functional integrity to meet the feeding needs of a juvenile even as the relationship between parts must change to meet the demands imposed on adults. We examine growth and development of the cranium and mandible, using a unique ontogenetic series of known‐age coyotes (Canis latrans), analyzing ontogenetic changes in the shapes of each part, and the relationship between them, relative to key life‐history events. Both cranial and mandibular development conform to general mammalian patterns, but each also exhibits temporally and spatially localized maturational transformations, yielding a complex relationship between growth and development of each part as well as complex patterns of synchronous growth and asynchronous development between parts. One major difference between cranium and mandible is that the cranium changes dramatically in both size and shape over ontogeny, whereas the mandible undergoes only modest shape change. Cranium and mandible are synchronous in growth, reaching adult size at the same life‐history stage; growth and development are synchronous for the cranium but not for the mandible. This synchrony of growth between cranium and mandible, and asynchrony of mandibular development, is also characteristic of a highly specialized carnivore, the spotted hyena (Crocuta crocuta), but coyotes have a much less protracted development, being handicapped relative to adults for a much shorter time. Morphological development does not predict life‐history events in these two carnivores, which is contrary to what has been reported for two rodent species. The changes seen in skull shape in successive life‐history stages suggest that adult functional demands cannot be satisfied by the morphology characterizing earlier life‐history stages. J. Morphol. 2011. © 2011 Wiley‐Liss, Inc.     

Evolution of opercle bone shape along a macrohabitat gradient: species identification using mtDNA and geometric morphometric analyses in neotropical sea catfishes (Ariidae)

Transitions between the marine and freshwater macrohabitat have occurred repeatedly in the evolution of teleost fishes. For example, ariid catfishes have moved from freshwater to marine environments, and vice versa. Opercles, a skeletal feature that has been shown to change during such transitions, were subjected to 2D geometric morphometric analyses in order to investigate evolutionary shape changes during habitat transition in ariid catfishes and to test the influence of habitat on shape changes. A mtDNA marker, which proved useful in previous studies, was used to verify species identities. It greatly improved the assignment of specimens to a species, which are difficult to assign by morphology alone. The application of a mtDNA marker confirmed the occurrence of Notarius biffi in Central America, South of El Salvador. Molecular identification together with principal component analysis (PCA) and further morphological inspection of neurocrania indicated the existence of a cryptic species within Bagre pinnimaculatus. Principal component (PC) scores of individual specimens clustered in morphospace by genus rather than by habitat. Strong phylogenetic structure was detected using a permutation test of PC scores of species means on a phylogenetic tree. Calculation of Pagel's λ suggested that opercle shape evolved according to a Brownian model of evolution. Yet canonical variate analysis (CVA) conducted on the habitat groups showed significant differences in opercle shapes among freshwater and marine species. Overall, opercle shape in tropical American Ariidae appears to be phylogenetically constrained. This verifies the application of opercle shape as a taxonomic tool for species identification in fossil ariid catfishes. At the same time, adaptation to freshwater habitats shows characteristic opercle shape trajectories in ariid catfishes, which might be used to detect habitat preferences in fossils.     

Trophic niche and habitat shifts of sympatric Gerreidae

The diet and mouth growth rates of three Gerreidae species (Eugerres brasilianus, Eucinostomus melanopterus and Diapterus rhombeus) were assessed at different ontogenetic phases (juveniles, sub‐adults and adults) in order to detect allometric growth, and whether they are related to habitat and seasonal changes in the Goiana Estuary, north‐east Brazil. The importance of each prey for each ontogenetic phase was described using the index of relative importance. The three species showed seasonal ontogenetic shifts in diet and allometric growth of mouth morphology. They also had an exclusively zoobenthic diet, comprising mainly Polychaeta, Copepoda, Ostracoda, Gastropoda and Bivalvia. Mouth development showed a possible influence on diet changes for E. melanopterus. Significant interactions (P < 0·01) were detected among seasons, areas and ontogenetic phases for the most important prey for E. brasilianus and E. melanopterus. Diet overlaps are evidence of intra and interspecific competition among gerreids for specific prey. A conceptual model of the competition and seasonal diet shifts among ontogenetic phases of gerreids is given. The sediment ingested due to the feeding mechanisms of Gerreidae species could also partially explain the ingestion of synthetic items observed for all ontogenetic phases, which indicates one of a myriad effects of human activities (e.g. artisanal fishery) in this estuary.     

The evolution of ontogenetic allometric trajectories in mammalian domestication

Morphological divergence of domesticated as compared to wild forms must result from changes in the ontogenetic process. Species‐specific tests for heterochrony have rejected a single explanation of domestic forms representing juveniles of their wild relatives. Ontogenetic allometric trajectories for 12 pairs of wild and domestic mammals were examined using skull growth data for 1070 specimens, including representatives from all lineages in which domestication has occurred. A suite of tests were performed to quantify allometric disparity in wild and domestic forms and assess the extent and patterning of modification to allometric trajectories. Domestication has modified postnatal ontogenetic allometric trajectories in mammals, and has generated disparity, achieved through lengthening of trajectory slopes and alteration to slope angles. Allometric disparity was similar for domestic forms compared to their wild relatives, whereas the magnitude of dispersion along allometric vectors differed between precocial mammals and altricial mammals, underscoring the importance of life history and shared evolutionary history in patterns of ontogenetic variation. The results verify the importance of scaling in the morphological changes associated with domestication. The response to domestication for all measured trajectory parameters was variable across species, suggesting multiple pathways of change.     

Postnatal mandible growth in wild and laboratory mice: Differences revealed from bone remodeling patterns and geometric morphometrics

Comparative information on the variation in the temporospatial patterning of mandible growth in wild and laboratory mice during early postnatal ontogeny is scarce but important to understand variation among wild rodent populations. Here, we compare mandible growth between two ontogenetic series from the second to the eighth week of postnatal life, corresponding to two different groups of mice reared under the same conditions: the classical inbred strain C57BL/6J, and Mus musculus domesticus . We characterize the ontogenetic patterns of bone remodeling of the mandibles belonging to these laboratory and wild mice by analyzing bone surface, as well as examine their ontogenetic form changes and bimodular organization using geometric morphometrics. Through ontogeny, the two mouse groups display similar directions of mandible growth, according to the temporospatial distribution of bone remodeling fields. The allometric shape variation of the mandibles of these mice entails the relative enlargement of the ascending ramus. The organization of the mandible into two modules is confirmed in both groups during the last postnatal weeks. However, especially after weaning, the mandibles of wild and laboratory mice differ in the timing and localization of several remodeling fields, in addition to exhibiting different patterns of shape variation and differences in size. The stimulation of dentary bone growth derived from the harder post‐weaning diet might account for some features of postnatal mandible growth common to both groups. Nonetheless, a large component of the postnatal growth of the mouse mandible appears to be driven by the inherent genetic programs, which might explain between‐group differences.     

Feeding mechanism of Epibulus insidiator (Labridae; Teleostei): Evolution of a novel functional system

The feeding mechanism of Epibulus insidiator is unique among fishes, exhibiting the highest degree of jaw protrusion ever described (65% of head length). The functional morphology of the jaw mechanism in Epibulus is analyzed as a case study in the evolution of novel functional systems. The feeding mechanism appears to be driven by unspecialized muscle activity patterns and input forces, that combine with drastically changed bone and ligament morphology to produce extreme jaw protrusion. The primary derived osteological features are the form of the quadrate, interopercle, and elongate premaxilla and lower jaw. Epibulus has a unique vomero-interopercular ligament and enlarged interoperculo-mandibular and premaxilla-maxilla ligaments. The structures of the opercle, maxilla, and much of the neurocranium retain a primitive labrid condition. Many cranial muscles in Epibulus also retain a primitive structural condition, including the levator operculi, expaxialis, sternohyoideus, and adductor mandibulae. The generalized perciform suction feeding pattern of simultaneous peak cranial elevation, gape, and jaw protrusion followed by hyoid depression is retained in Epibulus. Electromyography and high-speed cinematography indicate that patterns of muscle activity during feeding and the kinematic movements of opercular rotation and cranial elevation produce a primitive pattern of force and motion input. Extreme jaw protrusion is produced from this primitive input pattern by several derived kinematic patterns of modified bones and ligaments. The interopercle, quadrate, and maxilla rotate through angles of about 100 degrees, pushing the lower jaw into a protruded position. Analysis of primitive and derived characters at multiple levels of structural and functional organization allows conclusions about the level of design at which change has occurred to produce functional novelties.