Estimation of pseudopeptide metal ion complexation tendencies by special MS methods,HPCE and circular dichroism

Summary To obtain more insight into catalytic mechanisms of metallo enzymes and specific metal complexation by proteins we use linear and cyclic pseudopeptides as mimetics. Knowledge about tendencies of complex formation of different ligands with selected transition metal ions is an indispensable prerequisite for the development of homo-and hetero-dinuclear metallo enzyme mimetics. Three pseudotripeptide ligands were investigated with respect to formation tendency and properties of complexes with the transition metal ions Cu²⁺, Zn²⁺ Ni²⁺, Co²⁺ and Mn²⁺. To study complexation tendencies we applied different methods. One of the important prerequisites for the application in a secreening of series of peptide ligands is the necessity for a minimal amount of substance. We used and compared certain masspectrometric methods for the estimation of a rank order of complexation of certain transition metal ions. We also applied spectrophotometric titration, circular dichroism measurements, capillary electrophoresis and pH-rate profile of catalytic activity in the attempt to evaluate complex formation tendencies. Except for the spectrophotometric pH-titration and the pH-profile of catalytic activity all methods, were applicable, but each method has its advantages and disadvantages depending on the separation effect of the ligand from the metal complex, and depending on the spectroscopic properties of ligand and complex. The results regarding complex formation are compared to each other. Comparison of pairs by MALDI-TOF-and ESI-MS allows an estimation of the rank order of complexation tendency of one ligand with different metal ions and requires the least amount of substance. The other investigated methods provided additional information on structural properties of the formed complexes; however either they required too much pseudopeptide ligand or were not applicable for all transition metal ions used in this study.     

Estimation of pseudopeptide metal ion complexation tendencies by special MS methods, HPCE and circular dichroism

To obtain more insight into catalytic mechanisms of metallo enzymes and specific metal complexation by proteins we use linear and cyclic pseudopeptides as mimetics. Knowledge about tendencies of complex formation of different ligands with selected transition metal ions is an indispensable prerequisite for the development of homo- and hetero-dinuclear metallo enzyme mimetics. Three pseudotripeptide ligands were investigated with respect to formation tendency and properties of complexes with the transition metal ions Cu²⁺, Zn²⁺, Ni²⁺, Co²⁺ and Mn²⁺. To study complexation tendencies we applied different methods. One of the important prerequisites for the application in a screening of series of peptide ligands is the necessity for a minimal amount of substance. We used and compared certain masspectrometric methods for the estimation of a rank order of complexation of certain transition metal ions. We also applied spectrophotometric titration, circular dichroism measurements, capillary electrophoresis and pH-rate profile of catalytic activity in the attempt to evaluate complex formation tendencies. Except for the spectrophotometric pH-titration and the pH-profile of catalytic activity all methods were applicable, but each method has its advantages and disadvantages depending on the separation effect of the ligand from the metal complex, and depending on the spectroscopic properties of ligand and complex. The results regarding complex formation are compared to each other. Comparison of pairs by MALDI-TOF- and ESI-MS allows an estimation of the rank order of complexation tendency of one ligand with different metal ions and requires the least amount of substance. The other investigated methods provided additional information on structural properties of the formed complexes; however either they required too much pseudopeptide ligand or were not applicable for all transition metal ions used in this study.     

mRNA display selection and solid‐phase synthesis of Fc‐binding cyclic peptide affinity ligands

Cyclic peptides are attractive candidates for synthetic affinity ligands due to their favorable properties, such as resistance to proteolysis, and higher affinity and specificity relative to linear peptides. Here we describe the discovery, synthesis and characterization of novel cyclic peptide affinity ligands that bind the Fc portion of human Immunoglobulin G (IgG; hFc). We generated an mRNA display library of cyclic pentapeptides wherein peptide cyclization was achieved with high yield and selectivity, using a solid‐phase crosslinking reaction between two primary amine groups, mediated by a homobifunctional linker. Subsequently, a pool of cyclic peptide binders to hFc was isolated from this library and chromatographic resins incorporating the selected cyclic peptides were prepared by on‐resin solid‐phase peptide synthesis and cyclization. Significantly, this approach results in resins that are resistant to harsh basic conditions of column cleaning and regeneration. Further studies identified a specific cyclic peptide—cyclo[Link‐M‐WFRHY‐K]—as a robust affinity ligand for purification of IgG from complex mixtures. The cyclo[Link‐M‐WFRHY‐K] resin bound selectively to the Fc fragment of IgG, with no binding to the Fab fragment, and also bound immunoglobulins from a variety of mammalian species. Notably, while the recovery of IgG using the cyclo[Link‐M‐WFRHY‐K] resin was comparable to a Protein A resin, elution of IgG could be achieved under milder conditions (pH 4 vs. pH 2.5). Thus, cyclo[Link‐M‐WFRHY‐K] is an attractive candidate for developing a cost‐effective and robust chromatographic resin to purify monoclonal antibodies (mAbs). Finally, our approach can be extended to efficiently generate and evaluate cyclic peptide affinity ligands for other targets of interest. Biotechnol. Bioeng. 2013; 110: 857–870. © 2012 Wiley Periodicals, Inc.     

Cyclization of several linear penta- and heptapeptides with different metal ions studied by CD spectroscopy.

A cyclic pentapeptide c(Tyr-Leu-Ala-Gly-Pro) (I), which was isolated and identified from Pseudostellaria heterophylla medicinal herbs, and two cyclic heptapeptides, c(Gly-Tyr-Gly-Gly-Pro-Phe-Pro) (II) and c(Gly-Ile-Pro-Tyr-Ile-Ala-Ala) (III), which were isolated and identified from Stellaria yunnanensis Franch (M), were synthesized by using 3-(diethoxyphosphoryloxy)-1,2,3-benzotriazin-4(3 H)-one (DEPBT) as a coupling reagent in solution, and mediated by different metal ions, from their linear peptide precursors H-Tyr-Leu-Ala-Gly-Pro-OH (I-1) and H-Ala-Gly-Pro-Tyr-Leu-OH (I-2), H-Gly-Tyr-Gly-Gly-Pro-Phe-Pro-OH (II-1) and H-Gly-Ile-Pro-Tyr-Ile-Ala-Ala-OH (III-1), respectively. The results show that alkali metal ions can improve the cyclization yields and/or the cyclization rates of linear peptide precursors, such as Na(+) ion is favorable for the cyclization of linear pentapeptides and Cs(+) ion is favorable for the cyclization of linear heptapeptides, while some bivalent and trivalent metal ions, such as Mg(2+), Ca(2+), Zn(2+), Fe(2+), Ni(2+) and Cr(3+) reduced/inhibited both the cyclization yields and the cyclization rates of the linear peptide precursors. The circular dichroism spectra of I-1, II-1 and III-1 with different metal ions were studied to elucidate the changes in their secondary structures. It is shown that Cs(+) can induce and stabilize the type I beta-turn conformation in the linear heptapeptide II-1 and the type II beta-turn conformation in the linear heptapeptide III-1.     

Epimerization‐free synthesis of cyclic peptide by use of the O‐acyl isopeptide method

A head‐to‐tail cyclization of a protected linear hexapeptide with a C‐terminal O‐acyl isopeptide proceeded to give a cyclic O‐acyl isopeptide without epimerization. The cyclic O‐acyl isopeptide possessed different secondary structures compared with the native cyclic peptide. The isopeptide was then efficiently converted to the desired cyclic peptide via an O‐to‐N acyl migration reaction using a silica gel‐anchored base. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Cyclization of a cytolytic amphipathic alpha-helical peptide and its diastereomer: effect on structure, interaction with model membranes, and biological function

The amphipathic alpha-helical structure is considered to be a prerequisite for the lytic activity of a large group of cytolytic peptides. However, despite numerous studies on the contribution of various parameters to their structure and activity, the importance of linearity has not been examined. In the present study we functionally and structurally characterized a linear amphipathic alpha-helical peptide (wt peptide), its diastereomer, and cyclic analogues of both. Using analogues with the same sequence of hydrophobic and positively charged amino acids, but with different propensities to form a helical structure, we were able to examine the contribution of linearity to helix formation, bilogical function, and membrane binding and permeation. Importantly, we found that cyclization increases the selectivity between bacteria and human erythrocytes by substantially reducing the hemolytic activity of the cyclic peptides compared with the linear peptides. Moreover, whereas the wt peptide was highly active toward gram(+) bacteria, its cyclic counterpart is active toward both gram(+) and gram(-) bacteria. These findings are correlated with an impaired ability of the cyclic analogues to bind and permeate zwitterionic phospholipid membranes compared with their linear counterparts and an increase in the binding and permeating activity of the cyclic wt peptide toward negatively charged membranes. Furthermore, cyclization abolished the oligomerization of the linear wt peptide in solution and in SDS, suggesting an additional factor that may account for the difference in the spectrum of antibacterial activity between the linear and the cyclic wt peptides. Interestingly, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy revealed that, despite cyclization and incorporation of 33% D-amino acids along the peptide backbone, the membrane environment can impose a predominantly helical structure on the peptides, which is required for their bilogical function. Overall, our results indicate that linearity is not a prerequisite for lytic activity of amphipathic alpha-helical peptides but rather affects the selectivity between gram(+) and gram(-) bacteria and between mammalian cells and bacteria. In addition, the combination of incorporating of D-amino acids into lytic peptides and their cyclization open the way for developing a new group of antimicrobial peptides with improved properties for treating infectious diseases.     

Chemical and functional characterization of metal-binding pseudotripeptides with different functionalized N-alkyl residues Dedicated to Professor Dr. Ernst-Gottfried Jaeger on occasion of his 65th birthday

Summary Pseudotripeptide ligands with 4 different N-functionalized glycine residues were qualitatively, semiquantitatively and quantitatively tested for their complexation of the bivalent transition metal ions Zn²⁺, Cu²⁺, Co²⁺, Ni²⁺ and Mn²⁺. The functional side chains have different length and different groups available for complexation. MALDI-MS and ESI-MS were used for more qualitative or semiquantitative estimation of the complex formation tendencies. The found ranking differs by these two methods only for Zn²⁺ and Ni²⁺. For one of the pseudotripeptide ligands, the ligand L1, complex formation with certain transition metal was estimated quantitatively by potentiometric titration. The Zn-complex of that ligand polarizes bound water strongly, resulting in a low pK _a -value. Complexes of pseudotripeptide ligand L1 with certain metal ions were tested for their hydrolytic activity. The pseudo first order rate constants of the hydrolysis of the substrates 4-nitrophenyl acetate and bis(4-nitrophenyl)phosphate were compared to complexes with the same metal ions formed with a very well studied ligand from the literature, the 1,4,7,10-tetraaza cyclododecane (cyclen). The hydrolysis of the phosphate ester occurs very slowly compared to the acetate ester. No correlation exists between the estimated pK _a values of complexes formed from ligand L1 with different metal ions and the phosphate ester hydrolysis. The Ni ions give totally different hydrolytic activities for pseudotripeptide ligand L1 and cyclen. With one exception, the Ni-cyclen complex, all other complexes have only a low or moderate catalytic activity. Dedicated to Professor Dr. Ernst-Gottfried Jaeger on occasion of his 65th birthday.     

Synthesis,biological activity and conformational analysis of head‐to‐tail cyclic analogues of LL37 and histatin 5

LL37 and histatin 5 are antimicrobial peptides. LL37 exhibits killing activity against a broad spectrum of pathogens, whereas histatin 5 is primarily an antifungal agent. Head‐to‐tail cyclization of histatin 5 did not affect its antimicrobial and haemolytic activity. The cyclic LL37 exhibits identical antifungal and haemolytic activity as does LL37. Its antimicrobial activity varied in one dilution depending on the kind of bacteria. The structure of cyclic peptides was studied by circular dichroism spectroscopy. Both peptides undergo a conformational change leading to stabilisation of their α‐helical structure in the presence of negatively charged sodium dodecyl sulfate micelles. However, with cyclic histatin 5, the presence of Zn²⁺ ions is also necessary to fuse the peptide to the micelle. The specific action of the Zn²⁺ ions is attributed to the presence of a zinc‐binding motif, His‐Glu‐X‐X‐His. It has been speculated that this zinc complexing may be related to the well‐established anticandidal activity. In the case of cyclic LL37, also the presence of a zwitterionic dodecylphosphocholine micelle induces formation of the helical structure. A microwave‐assisted procedure for the cleavage of a peptide from the 2‐chlorotrityl chloride resin was, for the first time, successfully used to obtain protected peptide fragments that can be applied to the preparation of head‐to‐tail cyclopeptides or to condensation of peptidic fragments. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

非核糖体肽合成酶的末端硫酯酶与多肽环化

非核糖体肽合成酶（nonribosomal peptide synthetases,NRPSs）能以多载体巯基化模板机制合成各种结构复杂、种类繁多的次生代谢非核糖体环肽.根据环肽末端环化的方式,可分为两大类：大环内酯型和内酰胺型.负责非核糖体环肽最终环化的硫酯酶（thioesterase,TE）属于α/β水解酶超家族.该家族包括：脂酶、蛋白酶、酯酶等,其共有特征是含有保守的催化三元件（Ser-His-Asp）,起到终止反应和释放产物的功能. TE具有区域定向性（regiospecific）、化学定向性（chemospecific）及立体定向性（stereospecific）的特点,在非核糖体肽（nonribosomal peptide,NRP）的合成反应中具有决定性作用,直接影响到最终环肽的生成. 同时,TE由于其特有的环化和水解的双重活性,在体外的线性多肽环化中越来越受到众多学者的关注. 综合国内外相关文献,本文着重从TE介导下的产物释放机制和影响因素两个方面综述非核糖体末端硫酯酶的研究进展及其应用.     

Syntheses and activities of backbone‐side chain cyclic octapeptide ligands with N‐functionalized phosphotyrosine for the N‐terminal SH2‐domain of the protein tyrosine phosphatase SHP‐1

The protein tyrosine phosphatase SHP‐1 plays an important role in many physiological and pathophysiological processes. This phosphatase is activated through binding of ligands to its SH2‐domains, mainly to the N‐terminal one. Based on a theoretical docking model, backbone‐to‐side chain cyclized octapeptides were designed as ligands. Assembly of such modelled structures required the synthesis of N‐functionalized tyrosine derivatives and their incorporation into the sequence. Because of difficulties encountered in the condensation of N‐protected amino acids to the N‐alkylated tyrosine‐peptide we synthesized and used preformed dipeptide building units. As all attempts to obtain phosphorylated dipeptide units failed, the syntheses had to be performed with a free phenolic function. Use of different N‐alkyl or cycloalkyl residues in the N‐functionalized side chains allowed to investigate the effect of ring size, flexibility and hydrophobicity of formed lactam bridges on stimulatory activity. All tested linear and cyclic octapeptides stimulate the phosphatase activity of SHP‐1. Stimulatory activities of cyclic ligands increase with the chain length of the lactam bridges resulting in increased flexibility and better entropic preformation of the binding conformation. The strong activity of some cyclic octapeptides supports the modelled structure. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Chemical and functional characterization of metal-binding pseudotripeptides with different functionalized N-alkyl residues Dedicated to Professor Dr. Ernst-Gottfried Jaeger on occasion of his 65th birthday

Pseudotripeptide ligands with 4 different N-functionalized glycine residues were qualitatively, semiquantitatively and quantitatively tested for their complexation of the bivalent transition metal ions Zn²⁺, Cu²⁺, Co²⁺, Ni²⁺ and Mn²⁺. The functional side chains have different length and different groups available for complexation. MALDI-MS and ESI-MS were used for more qualitative or semiquantitative estimation of the complex formation tendencies. The found ranking differs by these two methods only for Zn²⁺ and Ni²⁺. For one of the pseudotripeptide ligands, the ligand L1, complex formation with certain transition metal was estimated quantitatively by potentiometric titration. The Zn-complex of that ligand polarizes bound water strongly, resulting in a low pK_a-value. Complexes of pseudotripeptide ligand L1 with certain metal ions were tested for their hydrolytic activity. The pseudo first order rate constants of the hydrolysis of the substrates 4-nitrophenyl acetate and bis(4-nitrophenyl)phosphate were compared to complexes with the same metal ions formed with a very well studied ligand from the literature, the 1,4,7,10-tetraaza cyclododecane (cyclen). The hydrolysis of the phosphate ester occurs very slowly compared to the acetate ester. No correlation exists between the estimated pK_a values of complexes formed from ligand L1 with different metal ions and the phosphate ester hydrolysis. The Ni ions give totally different hydrolytic activities for pseudotripeptide ligand L1 and cyclen. With one exception, the Ni-cyclen complex, all other complexes have only a low or moderate catalytic activity.     

高负载Cu单原子纳米酶的制备和类酶活性研究

目的 单原子纳米酶（single-atom nanozyme，SAN）因其高原子利用率及丰富的类酶活性被广泛研究。但是目前大多数SAN活性位点负载量较低，限制了其进一步应用和发展。本研究旨在制备一种高原子负载量的SAN，并对其类酶活性进行系统研究，希望为高负载SAN的制备提供思路，并为SAN在更广泛领域的应用提供理论支持。方法 本研究通过原位锚定策略将金属盐前驱体锚定在氨基化石墨烯量子点框架中，在惰性气体保护下进行高温热解稳定Cu原子和载体之间的化学键，制备出负载量高达7.66%（质量百分比）的高负载Cu单原子纳米酶（high-loading Cu SAN）。此外，以3,3",5,5"-四甲基联苯胺（TMB）和氮蓝四唑（NBT）为显色剂，评估了high-loading Cu SAN的类过氧化物酶（POD）、类氧化物酶（OXD）及类超氧化物歧化酶（SOD）活性，并与传统金属有机框架锚定法制备的低负载Cu单原子纳米酶（low-loading Cu SAN）作比较。以过氧化氢（H₂O₂）为催化底物，对比研究了高/低负载Cu SAN的类过氧化氢酶（CAT）活性。结果 研究表明，本文制备的高负载Cu SAN的类POD和SOD活性分别是低负载Cu SAN的3.4倍和8.88倍，且表现出类酶催化选择性。结论 本研究为高负载SAN的制备和活性研究提供了思路，为SAN在检测传感、疾病治疗以及环境保护等方面的应用奠定了基础。     

A novel cyclic analog of neuropeptide Y specific for the Y2 receptor.

The low-molecular-mass, cyclic analog of neuropeptide Y, [Ahx5-24, gamma-Glu2-epsilon-Lys30] NPY (YESK-Ahx-RHYINKITRQRY; Ahx, 6-aminohexanoic acid; NPY, neuropeptide Y), was synthesized and investigated for receptor binding, inhibition of forskolin-stimulated cAMP accumulation, inhibition of electrically stimulated rat vas deferens contractions and ability to increase blood pressure. Like the linear peptide [Ahx5-24] NPY (YPSK-Ahx-RHYINLITRQRY), the more rigid, cyclic analog showed good correlation between receptor binding to rabbit kidney membranes and biological activity in the vas deferens assay. Binding of this peptide to a new Y2-receptor-expressing cell line was slightly reduced, compared to the linear peptide [Ahx5-24] NPY, however inhibition of cAMP accumulation was even more efficient. Unlike the linear peptide [Ahx5-24] NPY, the cyclic analog did not induce a blood pressure increase in rats. Reduced binding to Y1 receptor-expressing SK-N-MC cells, as well as the loss of capability of signal transduction, suggest that only Y2-mediated activity is preserved after cyclization. The selectivity of the cyclic compound for Y2 subtypes of NPY receptors with respect to inhibition of cAMP accumulation is more than fortyfold increased, as compared to the linear NPY-(13-36) peptide, which has been used to determine Y2 selectivity so far.     

Studies on cyclic peptides. I. Cyclodisarcosyl-metal salts complexes

The complexes of cyclodisarcosyl (N,N′-dimethyldiketopiperazine) have been synthesized with copper perchlorate, lithium perchlorate, barium perchlorate, silver perchlorate, silver nitrate, and boron trifluoride. It has been shown by infrared absorption spectra that the metal cations coordinate to carbonyl groups of the peptide to form insoluble complexes. It has been suggested that the complexation takes place by ion–dipole interaction. Since a linear analog of the peptide formed no insoluble complex with the metal salts, conformation of cyclodisarcosyl seems to play an important role in the complex formation. Examination of the molecular model and X-ray analysis suggest that the copper perchlorate complex of the cyclic peptide has a “2:1-sandwich” structure.     

Examination of methodology for the synthesis of cyclic thioether peptide libraries derived from linear tripeptides.

Work was undertaken to examine methodology for the cyclization of linear tripeptides on the solid phase via intramolecular S-alkylation using the Multipin(trade mark) Solid-Phase Peptide Synthesis platform. While previous work had shown that this chemistry could be used to efficiently cyclize linear tetrapeptide libraries, application of this synthetic strategy to the model linear tripeptide sequence Leu-Ser-Lys resulted in significant cyclic dimer formation. Ultimately, it was found that the addition of a large excess of lithium in the form of LiCl to the cyclization solution, significantly reduced cyclic dimer formation affording highly pure crude cyclic monomer. The application of this modified cyclization protocol to the preparation of cyclic peptide libraries was successfully demonstrated with the synthesis of a 20-membered library 4{1-20} based on the linear tripeptide sequence Leu-Xxx-Lys in which the position Xxx was varied with the standard 20 proteogenic residues.     

Synthesis of cyclopentapeptides and cycloheptapeptides by DEPBT and the influence of some factors on cyclization.

Three cyclic peptides - cyclo(GlyAlaTyrLeuAla), cyclo(GlyProTyrLeuAla) and cyclo(GlyTyrGlyGlyProPhePro) - isolated and identified from medicinal herbs were chosen as model cyclic peptides to study the influence of the linear precursors and coupling reagents on cyclization. The 17 linear precursors of these three cyclic peptides were synthesized and cyclized using 3-(diethoxyphosphoryloxy)-(1-3)-benzotriazin-4 (3H)-one (DEPBT) as the major coupling reagent. The present work shows that: (i) the effects of linear peptide precursors on the cyclization are complex but some guidelines for choosing suitable precursor for cyclization could be considered; and (ii) DEPBT results in a higher cyclization yield compared with other coupling reagents. In addition, it was confirmed that peptides containing alternating D and L residues favor cyclization.     

Characterization of synthetic peptide byproducts from cyclization reactions using on-line HPLC-ion spray and tandem mass spectrometry

Summary The cyclization of a linear dynorphin A (Dyn A) analogue to give the lactam derivative cyclo[d-Asp², Dap⁵]Dyn A(1–13)NH₂ (where Dap=,-diaminopropionic acid) was studied to evaluate the usefulness of different coupling reagents for side chain to side chain lactam formation. This cyclization proved to be difficult and yielded substantial byproducts that varied depending upon the activating reagent used. On-line HPLC-ion spray mass spectrometry was more practical and useful than conventional HPLC alone for characterizing the products of these cyclization reactions. Peptide byproducts could be identified from the series of multiply charged ions observed, even when some of these peptides eluted from the HPLC with similar retention times. In addition to the desired cyclic peptide, the peptide byproducts observed following the cyclization using BOP (benzotriazol-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate) were the linear peptide, the cyclic dimeric peptide and the linear peptide resulting from aspartimide rearrangement. The peptide byproducts obtained following cyclization using HATU (O-(7-azabenzotriazol-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate) and HAPyU (O-(7-azabenzotriazol-1-yl)-1,1,3,3-bis(tetramethylene)uronium hexafluorophosphate) were predominantly linear tetramethylguanidinium (Tmg) and dipyrrolidinylguanidinium (Dpg) derivatives resulting from alkylation of the side chain of Dap by HATU and HAPyU, respectively; in addition to monomeric guanidinium derivatives, dimeric and aspartimide-containing peptides were also produced. Peptide sequencing by ion spray tandem mass spectrometry was performed to confirm the structure of both pure peptides and peptide byproducts in the crude samples. A unique fragmentation for the ,-bond of the Dap side chain was demonstrated and could be used to identify linear peptide byproducts. The distinctive fragment ions from this cleavage were also observed for the peptides containing the Tmg and Dpg functionalities on the Dap side chain.     

Incorporation of N‐amidino‐pyroglutamic acid into peptides using intramolecular cyclization of α‐guanidinoglutaric acid

N‐terminal modification of peptides by unnatural amino acids significantly affects their enzymatic stability, conformational properties and biological activity. Application of N‐amidino‐amino acids, positively charged under physiological conditions, can change peptide conformation and its affinity to the corresponding receptor. In this article, we describe synthesis of short peptides, containing a new building block—N‐amidino‐pyroglutamic acid. Although direct guanidinylation of pyroglutamic acid and oxidation of N‐amidino‐proline using RuO₄ did not produce positive results, N‐amidino‐Glp‐Phe‐OH was synthesized on Wang polymer by cyclization of α‐guanidinoglutaric acid residue. In the course of synthesis, it was found that literature procedure of selective Boc deprotection using TMSOTf/TEA reagent is accompanied by concomitant side reaction of triethylamine alkylation by polymer linker fragment. It should be mentioned that independently from cyclization time and coupling agent (DIC or HCTU), the lactam formation was incomplete. Separation of the cyclic product from the linear precursor was achieved by HPLC in ammonium formate buffer at pH 6. HPLC analysis showed N‐amidino‐Glp‐Phe‐OH stability at acidic and physiological pH and fast ring opening in water solution at pH 9. The suggested method of N‐amidino‐Glp residue formation can be applied in the case of short peptide chains, whereas synthesis of longer ones will require fragment condensation approach. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Sortase A‐mediated synthesis of ligand‐grafted cyclized peptides for modulating a model protein‐protein interaction

Specific ligand‐grafted cyclic peptides are promising drug candidates that can modulate protein‐protein interactions (PPIs) with increased proteolytic stability. In this study, we aimed to demonstrate that Sortase A (SrtA)‐mediated peptide transpeptidation can be applied to produce bioactive sequence‐grafted, stable, cyclic peptides. A naturally occurring cyclic peptide, sunflower trypsin inhibitor 1 (SFTI‐1), was selected as the scaffold, and a tetrapeptide motif, Glu‐Ser‐Asp‐Val (ESDV), was grafted into the scaffold as a model ligand. The linear precursor of the grafted peptide with SrtA‐recognition motifs at the N‐ and C‐termini was cyclized in good yield simply by co‐incubation with SrtA. The ESDV‐grafted cyclic SFTI‐1 obtained was confirmed to have high stability against proteolysis by human serum and bound to the target PDZ2 domain of postsynaptic density‐95 protein. An optimized sequence‐grafted cyclic SFTI‐1 could competitively suppress the interaction of PDZ2 with its natural ligand, the C‐terminal peptide of the NR2B subunit of the N‐methyl‐D‐aspartate receptor. These results show that a strategy combining peptide grafting into the SFTI‐1 scaffold with SrtA‐catalyzed cyclization can be a simple and effective method for producing stable peptide drugs.     

A new fluorescent chemosensor for cadmium(II) based on a pyrene‐appended piperidone derivative and its β‐cyclodextrin complex

We report, in this article, a piperidin‐4‐one derivative carrying pyrenyl fluorescent reporter groups which acts as a Cd²⁺ ion sensor. The compound is synthesized and characterized using IR and NMR spectral techniques. The compound forms an inclusion complex with β‐cyclodextrin. It selectively binds to Cd²⁺ ions in water and aqueous β‐cyclodextrin media. The stoichiometry of the host–guest complex of the compound with β‐cyclodextrin is 1:2. The ligand–metal ion binding stoichiometry is 1:1 both in water and in β‐cyclodextrin. The linear concentration range of detection of the metal ion is reported. Cyclodextrin complex formation does not affect the metal ion selectivity of the compound.