Cell membrane coating with glutaraldehyde: application to a versatile solid-phase assay for thyroid membrane proteins and molecules interacting with thyroid membranes

In defined conditions, glutaraldehyde was shown to tightly bind cell membranes to flexible microtiter plates without significant alteration of the antigenic and functional properties of membrane proteins. In the presence of 0.06% glutaraldehyde, human thyroid membranes were bound to plastic firmly enough to resist numerous washing and flicking steps; the coated membranes remained almost unaltered with regard to monoclonal antibody and thyrotropin binding as well as adenylate cyclase and peroxidase activities. Based on the use of thyroid membrane-coated microtiter plates, a versatile solid-phase assay was developed which allowed screening of anti-membrane monoclonal antibodies, detection of thyrotropin-displacing activity in hormone and antibody preparations, and monitoring of fractionation experiments of solubilized membrane antigens and thyrotropin receptor. It was concluded that the use of glutaraldehyde for coating cell membranes to flexible microtiter plates enabled the establishment of simple, rapid, and reliable assays for detection and quantitation of membrane proteins and molecules interacting with membranes.     

Enzyme-linked coagulation assay. III. Sensitive immunoassays for clotting factors II, VII, and X

The solid-phase clotting assay utilizing fibrinogen coated on the wells of a microtiter plate and peroxidase-fibrinogen in solution as a substrate for thrombin (enzyme-linked coagulation assay, ELCA) has been modified for use as an immunoassay. Direct inhibition of factors II, VII, and X by polyclonal (rabbit) antibodies and of factor X by monoclonal antibodies has been demonstrated at high dilution of these antibodies and detection of the specific factors using ELCA. Using plates coated with a second antibody (goat anti-mouse IgG) as well as fibrinogen, monoclonal antibodies to factors X and VII were measured by binding the active factor to the plate and detection of the bound factor using ELCA. The assay was very sensitive, permitting the detection of as little as 0.2 ng/ml (30 pg/assay) of monoclonal antibody, or less than 0.4 ng/ml (60 pg/assay) of factor Xa. When plates were coated with monoclonal antibody to factor X and fibrinogen, the assay permitted the identification of distinct epitope specificities for two monoclonal antibodies to factor X by distinct competition of the monoclonal antibodies added in the solution phase for binding of factor Xa to the plate. This assay could be applied generally for immunoassay of clotting factors, and could have application in general as an immunoassay amplification system.     

Solid-Phase Immunoassays for Quantitation of Antibody to Bovine White Matter Proteolipid Apoprotein

Abstract: Two solid-phase immunoassays have been developed for quantitation of antibodies to bovine white matter proteolipid apoprotein. Conditions were established for optimal specific antibody binding. Water-soluble proteolipid apoprotein was bound to microtiter plates and plates were incubated with test serum. Goat anti-rabbit IgG conjugated with horeseradish peroxidase was used as the second antibody for an enzyme-linked immunospecific assay and ¹²⁵I-labeled protein A for a radioimmunoassay. Both procedures have been used to follow the time course of anti-proteolipid antibody production in rabbits and to compare different immunization protocols.     

A conserved epitope on several human vitamin K-dependent proteins. Location of the antigenic site and influence of metal ions on antibody binding

A murine monoclonal antibody (designated H-11) produced by injecting mice with purified human protein C was found to bind several human vitamin K-dependent proteins. Using a solid-phase competitive radioimmunoassay with antibody immobilized onto microtiter plates, binding of 125I-labeled protein C to the antibody was inhibited by increasing amounts of protein C, prothrombin, and Factors X and VII over a concentration range of 1 X 10(-8) to 1 X 10(-6) M. Other vitamin K-dependent proteins including Factor IX and protein S did not inhibit or inhibited only at the highest concentration binding of radiolabeled protein C to the immobilized antibody. Chemical treatment of prothrombin with a variety of agents including denaturation by sodium dodecyl sulfate, reduction with mercaptoethanol followed by carboxymethylation with iodoacetic acid, citraconylation of lysine residues, removal of metal ion with EDTA, or heat decarboxylation did not destroy the antigenic site recognized by the antibody as measured by immunoblotting of prothrombin or prothrombin derivative immobilized onto nitrocellulose. Immunoblotting of purified vitamin K-dependent polypeptides with the monoclonal antibody following sodium dodecyl sulfate-polyacrylamide gel electrophoresis and electrophoretic transfer to nitrocellulose indicated that the antigenic site was found on the light chains of protein C and Factor X. Chymotrypsin digestion of prothrombin and isolation on QAE-Sephadex of the peptide representing amino-terminal residues 1-44 of prothrombin further localized the antigenic site recognized by the monoclonal antibody to the highly conserved gamma-carboxyglutamic acid-containing domain. The exact location of the antigenic determinant for antibody H-11 was established using synthetic peptides. Antibody H-11 bound specifically to synthetic peptides corresponding to residues 1-12 of Factor VII and 1-22 of protein C. Comparison of protein sequences of bovine and human vitamin K-dependent proteins suggests that the sequence Phe-Leu-Glu-Glu-Xaa-Arg/Lys is required for antibody binding. The glutamic acid residues in this peptide segment are the first 2 gamma-carboxyglutamic acid residues near the amino-terminal end in the native proteins. Increasing concentrations of Ca2+, Mg2+, or Mn2+ partially inhibited binding of 125I-protein C to the antibody in a solid-phase assay system with half-maximal binding observed at divalent metal ion concentrations of 2, 4, and 0.6 mM, respectively.(ABSTRACT TRUNCATED AT 400 WORDS)     

Evaluation of peptide libraries: an iterative strategy to analyze the reactivity of peptide mixtures with antibodies.

Peptide libraries corresponding to a presumed mixture of 50,625 tetrapeptides or 16,777,216 hexapeptides were each prepared in a single assembly by standard solid-phase peptide synthesis. By enzyme-linked immunosorbent assay, the tetrapeptide library was shown to inhibit the binding of an antiserum to FMRF amide with an FLRF capture antigen; the hexapeptide library was shown to inhibit the binding of a monoclonal antibody to a 28 amino acid peptide with the corresponding peptide capture antigen. An iterative strategy of variation was used to determine for each position in the tetra- or hexapeptides which amino acid contributed the most to activity. As a result we were able to logically select out of the tetrapeptide library the sequence FLRF and to select out of the hexapeptide library a sequence that differed from the apparent probable epitope but was twice as active. A single amino acid substitution in the logically derived sequence gave a peptide that was 35 times as active as the hexapeptide sequence in the original 28 amino acid peptide.     

Monoclonal antibodies distinguish synthetic peptides that differ in one chemical group

By using human calcitonin (hCT), human calcitonin-gene-related peptide (hCGRP), and a synthetic peptide with a sequence analogous to the 34 C-terminal amino acids of human preprocalcitonin (designated as PQN-34) as haptens in the generation of monoclonal antibodies, we assessed the role of amido and amino groups in paratope-epitope binding. By using peptide inhibition experiments and solid-phase immunoassays, monoclonal anti-hCT antibody CT07 and monoclonal anti-hCGRP antibody CGR01 were found to bind to an antigenic determinant located in the C-terminal segment of the hormones. These epitopes comprise the seven C-terminal amino acids of the hormones, and the presence of the hormone-ending carboxamide group was found to be essential for antibody binding. The corresponding heptapeptides, either bearing a carboxyl group or else linked to a glycine residue at their C-terminal part, failed to react with the antibodies. Moreover, these monoclonal antibodies did not bind to synthetic peptides analogous to the C-terminal region of the hormone precursor molecules that comprised the epitope site flanked by a peptide sequence. In an attempt to assess whether amido groups when present on the side-chain of amino acids may also modulate antibody binding, a monoclonal antibody referred to as QPO1 was produced and was found to recognize an antigenic determinant localized in the N-terminal region of the PQN-34 peptide bearing a glutamine residue as the N-terminal amino acid. The epitope was found to correspond to a topographic assembled site, and binding of QPO1 was found to be substantially dependent on the presence of the free amino and the side-chain amido groups borne by the N-terminal glutamine residue of this peptide PQN-34. In contrast to these findings, an antigenic determinant located in the internal sequence of calcitonin and recognized by monoclonal anti-hCT antibody CT08 was found to be expressed on the mature form of the hormone, as well as on synthetic peptides with sequence mimicking that of preprocalcitonin. These data should guide the choice of synthetic peptide haptens for the production of anti-protein antibodies.     

Characterization of the binding epitope of the monoclonal antibody DMAb-1 to ganglioside GM2.

Several derivatives of ganglioside GM2 were synthesized for mapping of the binding epitope of a monoclonal antibody raised against this ganglioside. The GM2 ganglioside was modified in both the hydrophobic and the hydrophobilic part of the molecule. The synthesized derivatives were characterized with fast atom bombardment mass spectrometry (FAB-MS). Affinity of the monoclonal antibody for the GM2 derivatives was determined by enzyme-linked immunosorbent assay (ELISA) on microtitre plates or by TLC immunostaining. Modifying the GM2 sialic acid by deacetylation or blocking of the carboxyl moiety abolished the binding to the monoclonal antibody while the cleaving of the glycol group on the sialic acid tail led to a 70% reduced binding affinity. Removal of the fatty acid (lyso-GM2) eliminated the binding to the antibody. GM2 derivatives with fatty acid moieties of 8 carbon atoms or less showed almost no reactivity. GM2 with saturated fatty acids 16:0, 18:0 and 20:0 had binding affinity similar to natural GM2, while the 24:0 fatty acid had only half the binding affinity. The results demonstrate the importance of ganglioside fatty acid composition with regard to ligand binding between the monoclonal antibody and its specific ganglioside antigen. Thus, caution must be shown in the application of immunaffinity methods with monoclonal antibodies for the quantitative determination of glycosphingolipids from different tissues.     

Fluorescein isothiocyanate-hapten immunoassay for determination of peptide-cell interactions

We have developed a fluorescein isothiocyanate (FITC)-hapten immunoassay, where a FITC-labeled peptide binding to a cell is assayed as the amount of immunoreactive fluorescein present in a cell lysate. An antifluorescein-horseradish peroxidase conjugate binds to either a fluoresceinated peptide in the lysate or a fluorescein attached to the wells of a microtiter plate in a competitive fashion. After washing, solid-phase peroxidase activity is measured and inversely related to the amount of FITC-labeled peptide present. To demonstrate the assay, the interaction of a FITC-labeled bombesin-like peptide with the gastrin-releasing peptide receptor on PC-3 and HT-29 cells was investigated. Using PC-3 cells, we obtained similar displacement curves and numbers of binding sites per cell by both the FITC-hapten immunoassay and a reference radioreceptor assay. The FITC-hapten immunoassay is a sensitive and versatile method, since the same commercially available reagents can be used to assess interactions between any peptide and any receptor. In addition, the FITC-labeled peptide can be used to visualize receptors in fluorescent-activated cell sorting or fluorescent microscopy.     

Relationships between liquid- and solid-phase antibody association characteristics: implications for the use of competitive ELISA techniques to map the spatial location of idiotopes

A liquid-phase assay system based on small-zone size-exclusion chromatography was used to examine the binding of a monoclonal anti-idiotopic antibody, F6, to its idiotope on the murine plasmacytoma IgA, TEPC-15. Chromatographic behavior revealed a strong association between T-15 and F6, which was previously characterized by solid-phase immunoassay as recognizing a nonbinding site epitope of the T-15. This chromatographic pattern suggests that the inability of the hapten phosphorylcholine to inhibit the anti-idiotope:idiotope relationship in solid-phase immunoassay might be equally explained by the low affinity of the hapten relative to the high affinity of the anti-idiotope antibody. Bivalent interactions between solid-phase IgA and liquid-phase IgG should enhance the binding of the anti-idiotope to an extent that would prevent the hapten from dissociating the complex. Under these solid-phase assay conditions, observation of hapten inhibition may, in some cases, indicate site specificity, but absence of inhibition cannot be interpreted. Computer simulations of solid-phase hapten inhibition scenarios were used to evaluate the qualitative nature of binding inhibition profiles expected under various conditions of liquid- and solid-phase reactant affinities and concentrations. The apparently unusual inhibition curves previously observed in the T-15:anti-T-15 studies in which the degree of binding inhibition by hapten appeared to be independent of anti-idiotope concentration may be predictable in cases of excess solid-phase epitope; the plateau inhibition value is a function of relative affinity constants and concentrations of solid-phase and inhibitor components. The results additionally suggest that the affinity of a liquid-phase antibody may modulate the effective concentration of solid-phase epitope.     

Comparison of an indirect format ELISA on modified graphite and polystyrene surfaces against triazines

An indirect format enzyme-linked immuno-sorbent assay (ELISA) on graphite rods ( 0.8 mm x 20 mm) and, for comparison, on microtiter plates has been developed against terbuthylazine. For this purpose, a series of 2-aminoalkyl-4-chloro-6-terbuthyl-s-triazine-2,6-diamine ELISA haptens with alkyl spacer lengths of 2, 4, 6, and 8 CH2 groups has been synthesized. The graphite rods or the microtiter plates were covered by a polymerized glutaraldehyde network, and the ELISA haptens have been coupled by imino coupling to the free aldehyde groups of that network. epsilon-Aminocaproic acid has been used as an agent to block unspecific binding sites. The ELISA was run in a competitive mode, where the immobilized ELISA hapten and the solute terbuthylazine as a target analyte compete for the solute antibody.     

A solid-phase assay for the quantitative analysis of hyaluronic acid at the nanogram level

A sensitive and accurate solid-phase assay for the quantitative determination of hyaluronic acid (HA) is described. The wells of the polystyrene microplates used were coated with glutaraldehyde followed, via a Schiff's base bond, with spermine to introduce amino groups. HA was added to the activated microwells in the presence of carbodiimide and left to bind via a peptide bond to the amino groups. Then aggrecan solution was added to the wells of the microtiter plates to interact with its G1 domain with hyaluronic acid, and the amounts of aggrecan bound were measured immunochemically. The inhibition of the binding between aggrecan and immobilized HA due to soluble HA present in reference solutions showed linearity in the range of concentrations 0.1 to 0.7 microg/ml. The reaction is specific and rapid and can be widely used for the calculation of HA in body fluids directly and in tissue samples after a brief digestion with a proteolytic enzyme.     

A 1-Hour Enzyme-Linked Immunosorbent Assay for Quantitation of Acrolein- and Hydroxynonenal-Modified Proteins by Epitope-Bound Casein Matrix Method

A simple and rapid enzyme-linked immunosorbent assay (ELISA) method for quantitation of acrolein and 4-hydroxy-2-nonenal (HNE)-modified proteins was developed. Microtiter plate wells were precoated and blocked simultaneously with epitope-bound bovine caseins as matrix proteins, and aldehyde-modified proteins were quantitated by a competition assay with a monoclonal antibody specific for acrolein-modified lysine or HNE-modified histidine epitopes. Minimal reaction times required for the coating/blocking; first monoclonal antibody and the peroxidase-conjugated second antibody binding steps were 3, 3, and 7 min, respectively, the former two steps being found to be or akin to diffusion-rate-limiting reactions. The convenient ELISA should find an application for analyses of the intricate processes involved in oxidative stress and carcinogenic insult. The epitope-attachment methodology may also be advantageous for the quantitation of various other biologically important haptenic molecules.     

A mimotope from a solid-phase peptide library induces a measles virus-neutralizing and protective antibody response.

A solid-phase 8-mer random combinatorial peptide library was used to generate a panel of mimotopes of an epitope recognized by a monoclonal antibody to the F protein of measles virus (MV). An inhibition immunoassay was used to show that these peptides were bound by the monoclonal antibody with different affinities. BALB/c mice were coimmunized with the individual mimotopes and a T-helper epitope peptide (from MV fusion protein), and the reactivity of the induced anti-mimotope antibodies with the corresponding peptides and with MV was determined. The affinities of the antibodies with the homologous peptides ranged from 8.9 x 10(5) to 4.4 x 10(7) liters/mol. However, only one of the anti-mimotope antibodies cross-reacted with MV in an enzyme-linked immunosorbent assay and inhibited MV plaque formation. Coimmunization of mice with this mimotope and the T-helper epitope peptide induced an antibody response which conferred protection against fatal encephalitis induced following challenge with MV and with the structurally related canine distemper virus. These results indicate that peptide libraries can be used to identify mimotopes of conformational epitopes and that appropriate immunization with these mimotopes can induce protective antibody responses.     

Interaction between various polymerized human albumins and hepatitis B surface antigen.

A variety of albumin polymers were prepared and tested for binding with hepatitis B surface antigen (HBsAg): synthetic polymers cross-linked by either glutaraldehyde or carbodiimide; heat-aggregated polymers made by heating albumin solutions at 60 degrees C for 10 h with or without albumin stabilizer; and polymers isolated from fresh or long-stored commercial therapeutic albumin solutions. A sensitive solid-phase, competitive-inhibition radioimmunoassay, which can detect as little as 10 ng of glutaraldehyde-cross-linked human albumin polymer (PHALB-G), was developed and used to measure binding. The binding of PHALB-G with HBsAg was 150- to 1,000-fold greater than that of any other albumin polymer. Glutaraldehyde-cross-linked bovine albumin polymer showed no binding. Albumin monomer and dimer fractions produced by glutaraldehyde treatment exhibited some binding, albeit much weaker than PHALB-G. As measured by a direct-binding assay with solid-phase PHALB-G, the attachment of HBsAg particles from sera positive for antibody to the e antigen was less efficient than that from sera positive for e antigen, even when all sera were tested at equal HBsAg concentrations. In protein blot experiments with radiolabeled albumin preparations, PHALB-G bound almost exclusively to HBsAg polypeptide P31 and showed no binding with the major polypeptides P23 and P26. None of the other radiolabeled albumin polymers was reactive. These results indicate that the interaction between PHALB-G and HBsAg is not due to polymerization of albumin per se, but rather is unique and site specific.     

Microimmunofluorescence using Terasaki plates and direct plate freezing method--rapid and reliable screening system of hybridomas

Microimmunofluorescence using Terasaki plates and a direct plate freezing method were combined for effective screening of hybridoma supernatants. The microplates, in which the fused cells (myeloma and spleen cells) were cultured and hybridoma colonies were growing, were frozen after harvest of supernatants and saved at -80 C for several weeks without affecting antibody production ability of hybridomas. Microimmunofluorescence was performed in Terasaki plates on which target cells were attached by poly-L-lysine and glutaraldehyde or by short time culture of the cells in Terasaki plates. The direct plate freezing method prevented initial hybridoma cells from changes or disappearance of antibody productions during screening of hybridoma supernatants; the microimmunofluorescence staining method permits fast and detailed estimation of specificity of antibodies of hybridomas by saving time and minimal consumption of supernatant for checking. The combination of these two methods is a powerful tool for obtaining desired monoclonal antibodies.     

Enzyme Immunoassay for Tachykinin-Like Immunoreactivity in the Guinea Pig Spinal Cord

A solid-phase enzyme immunoassay for quantitation of tachykinin-like immunoreactivity (TK-LI) is presented. Because the antiserum K-12 recognizes various tachykinins, such as neurokinin A (100%), kassinin (103%), eledoisin (51%), neurokinin B (18%), physalaemin (0.7%), and substance P (0.7%), the immunoreactivity detected in this enzyme immunoassay has been termed TK-LI. The assay was performed on 96-well microtiter plates coated with a mouse monoclonal second antibody. After preincubation of soluble neurokinin A or samples and K-12 antiserum for 3 h at room temperature, acetylcholinesterase-labelled neurokinin A was allowed to react overnight at 4 degrees C. Samples were finally incubated with Ellman's reagent for 2 h and the absorbance was measured at 414 nm. The threshold for detection of TK-LI was 2 fmol/well. TK-LI release from guinea pig dorsal spinal cord slices was evoked by capsaicin or high K+ medium. The capsaicin-evoked TK-LI release was increased in the presence of thiorphan, but not in that of captopril.     

Rational design and synthesis of peptide ligands for an anti-carbohydrate antibody and their immunochemical characterization

Molecular mimics of carbohydrates present an alternative source of compounds to target pathways involving protein-carbohydrate interactions. Certain peptides act as molecular mimics of carbohydrates in binding to anti-carbohydrate antibodies. A series of potential peptide ligands for the anti-carbohydrate antibody SYA/J6, directed against Shigella flexneri Y, was designed by molecular modeling based on a crystal structure of the antibody complex with a carbohydrate-mimetic peptide. These octapeptides were synthesized using solid-phase peptide synthesis, and their recognition by the antibody was investigated. The results shed light on the nature of peptide-carbohydrate mimicry.     

Detection and characterization of monoclonal antibodies to platelet membrane proteins

We have devised a solid-phase radioimmunoassay for the detection and characterization of monoclonal antibodies directed against platelet surface antigens. Platelet membrane proteins, solubilized with 0.1% Triton X-100, were covalently coupled to cyanogen bromide (CNBr)-activated filter paper disks that were than used as the support in antibody binding assays. SDS PAGE of solubilized membrane proteins taken immediately before and after incubation with activated disks indicated that representative amounts of each membrane protein were bound to the disks. Either monoclonal or heterologous anti-platelet antibody could be detected on disks that had been prepared using as little as 50 micrograms of membrane protein per 100 disks. For the detection of antibody, disks were incubated with test sera for 2 h, washed, and incubated with 125I-labeled anti-immunoglobulin G, and the amount of bound radioactivity was determined. The sensitivity of the disk assay in detecting monoclonal antibodies was far greater than that of a corresponding radioimmunoassay that used whole platelets as the solid phase. By linking other proteins such as fibrinogen or anti-mouse subclass specific antisera to CNBr-activated disks, the method was adapted for antibody characterization. The sensitivity and ease with which the assay can be performed make this technique most suitable for screening and characterizing monoclonal antibodies.     

Study of the interaction of the monoclonal antibody to human interleukin-2 and its Fab-fragment with synthetic peptides --interleukin-2 fragments by (1)H-NMR]

Proton signals for nine synthetic peptide fragments of human interleukin-2 (region 59-78) were assigned for aqueous solutions both of pure peptides and their mixtures with LNKB-2 monoclonal antibody. The nonspecific magnetization transfer (NOE) between the antibody or its Fab-fragment and the peptides was studied upon large excess of free peptide over bound peptide. NOE spectra using modified pulse sequence, enabling to eliminate broad signals and achieve higher (peptide signal)/noise ratio were obtained. The saturation transfer experiments indicated that methyl groups of amino acid residues corresponding to Leu66,70,72, Val69 and Ala73 in interleukin-2 contact with the antibody binding site. Thus, the hydrophobic interactions are of major importance for the LNKB-2-IL-2 peptide complexes. The minimal IL-2 fragment which can still bind to LNKB-2 monoclonal antibody is -Leu70-Asn71-Leu72-.     

Development of time-resolved fluoroimmunoassay with enhanced fluorescence reaction for the quantitation of atezolizumab in plasma

Atezolizumab (ATZ) is a human monoclonal antibody, which has been granted multiple approvals from the US Food and Drug Administration (FDA) for the immunotherapy of different types of cancer. This study describes the prototype of a time-resolved fluoroimmunoassay (TRFIA) for the quantitation of ATZ in plasma. The assay involved the non-competitive binding of ATZ to its specific antigen [programmed death-ligand 1 (PD-L1) protein]. The immune complex formed on the inner surface of the assay plate wells was quantified by anti-human secondary antibody labeled with a chelate of europium-ethylenediaminetetraacetic acid. The enhanced fluorescence signal was generated by an enhanced fluorescence solution composed of thenoyltrifluoroacetone, trioctylphosphine oxide, and Triton X-100. The conditions of the TRFIA were refined, and its optimum procedures were established. The assay was validated in accordance with the immunoassay validation guidelines, and all the validation parameters were acceptable. The working range of the assay was 20–1000 pg mL⁻¹, and its limit of quantitation was 20 pg mL⁻¹. The assay was applied to the quantitation of ATZ in plasma samples with satisfactory accuracy and precision. The proposed TRFIA has significant benefits over the existing methodologies for the quantitation of ATZ in clinical settings.