Comparison of covalent and physical immobilization of lipase in gigaporous polymeric microspheres

Lipase (EC 3.1.1.3) is a versatile enzyme which has been widely used in ester-reaction industries. We have previously discovered that gigaporous polystyrene (PST) microspheres can be used as a novel immobilization carrier for lipase. In this work, a series of gigaporous microspheres with different densities of epoxy group including poly(glycidyl methacrylate) (PGMA) and poly(styrene-co-glycidyl methacrylate) [P(ST-GMA)] were evaluated as lipase immobilization carriers, which were also compared with gigaporous PST microspheres and the commercial immobilized lipase Novozym 435. Lipase immobilized in gigaporous PGMA microspheres showed the highest activity yield, reusability, and stability as well as the best affinity for the substrate. The characterizations of adsorption curves, the change of epoxy group amounts, and hydrophobic–hydrophilic properties of the microspheres were carried out to investigate the interaction between lipase molecules and carriers. It was found that covalent binding played a key role in improving the properties of lipase immobilized in gigaporous PGMA microspheres.     

Enhanced catalytic ability of Candida rugosa lipase immobilized on pore-enlarged hollow silica microspheres and cross-linked by modified dextran in both aqueous and non-aqueous phases

Candida rugosa lipase (CRL) is one of the most widely used lipases. To enhance the catalytic abilities of CRL in both aqueous and non-aqueous phases, hollow silica microspheres (HSMSs) with a pore size of 18.07 nm were used as an immobilization support, and aldehydecontaining dextrans were employed to further cross-link the adsorbed CRL. In the experimental ranges examined, the loading amount of lipase linearly increased to 171 ± 3.4 mg_protein/g_support with the CRL concentration and all the adsorption equilibriums were reached within 30 min. After simple cross-linking, the tolerance to pH 4.0 ～ 8.0 as well as the thermal stability of immobilized CRL at 40 ～ 80°C were both substantially increased, and 82 ± 2.1% activity remaining after the sixth reuse. The immobilized CRL was successfully applied to the resolution of racemic ibuprofen in non-aqueous phase. The initial reaction rate increased by 1.4- and 3.6-fold compared with the rates of adsorbed and native lipases, respectively. Furthermore, the R-ibuprofen was obtained at ee > 93%, and the enantiomeric ratio reached E > 140 at the conversion of 50 ± 1.5% within 48 h.     

Enhancement of activity and selectivity of Candida rugosa lipase and Candida antarctica lipase A by bioimprinting and/or immobilization for application in the selective ethanolysis of fish oil

Candida rugosa lipase (CRL) and Candida antarctica lipase A (CALA) with improved activity and selectivity were prepared for use in organic solvent media. CRL bioimprinted with fatty acids exhibited eightfold enhanced transesterification activity in hexane. Combination of bioimprinting and coating with lecithin or with immobilization did not improve the activity further. CALA was immobilized with and without bioimprinting, none of which improved the activity. All modified lipases were tested for selective ethanolysis of fish oil to concentrate omega-3 polyunsaturated fatty acids (PUFA). None of the preparations, except the immobilized ones catalysed ethanolysis. Immobilized CRL-catalyzed ethanolysis giving 27% (v/v) ethyl esters (EE) in 48 h, of which 43 mol% was oleic acid but no PUFA was detected in the EE fraction. Fatty acid selectivity of CALA was significantly improved by immobilization combined with bioimprinting, resulting in 5.5-fold lower omega-3 PUFA in EE.     

Active biocatalysts based on Candida rugosa lipase immobilized in vesicular silica

Vesicular silica (VS) with hierarchical structure was prepared by utilizing cationic surfactant cetyltrimethylammonium bromide (CTAB) and anionic surfactant sodium dodecyl sulfate (SDS) as the structure directing agents, and 1,3,5-triisopropylbenzene (TIPB) as the micelle expander. The resulting unilamellar and multilamellar VS with interlamellar mean mesopore size of 15–20 nm and shell thickness of 5–15 nm were used as supports for immobilization of Candida rugosa lipase (CRL) through physical adsorption. Possible mechanisms for the formation of VS and the immobilization of CRL on VS are proposed. N₂ adsorption-desorption experiments and Fourier transform infrared spectroscopy (FT-IR) measurements demonstrated that CRL was adsorbed into the curved channels of the VS. The catalytic activity, thermal stability, and reusability of VS immobilized CRL were assayed in phosphate buffer medium by hydrolysis of triacetin. The effects of pH and temperature on enzyme activity were also investigated. We report that VS immobilized CRL exhibited outstanding adaptability at higher pH and temperature, and excellent thermal stability and reusability compared with free CRL.     

Immobilization of lipase onto micron-size magnetic beads

A novel and economical magnetic poly(methacrylate-divinylbenzene) microsphere (less than 8 microm in diameter) was synthesized by the modified suspension polymerization of methacrylate and cross-linker divinylbenzene in the presence of magnetic fluid. Then, surface aminolysis was employed to obtain a high content of surface amino groups (0.40-0.55 mmolg(-1) supports). The morphology and properties of these magnetic supports were characterized with scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and a vibrating sample magnetometer. These magnetic supports exhibited superparamagnetism with a high specific saturation magnetization (sigma(s)) of 14.6 emicrog(-1). Candida cylindracea lipase was covalently immobilized on the amino-functionalized magnetic supports with the activity recovery up to 72.4% and enzyme loading of 34.0 mgg(-1) support, remarkably higher than the previous studies. The factors involved in the activity recovery and enzymatic properties of the immobilized lipase prepared were studied in comparison with free lipase, for which olive oil was chosen as the substrate. The results show that the immobilized lipase has good stability and reusability after recovery by magnetic separation within 20s.     

Reversible immobilization of Candida rugosa lipase on fibrous polymer grafted and sulfonated p(HEMA/EGDMA) beads

Poly(2-hydroxyethyl methacrylate/ethylenglycol dimethacrylate) beads were grafted with poly(glycidylmethacrylate) via surface initiated atom transfer radical polymerization. Epoxy groups of the grafted polymer were modified in to sulfone groups. Sulfonated beads were characterized by swelling studies, FT-IR, SEM and elemental analysis, and were used for reversible immobilization of lipase. Under given experimental conditions, the beads had an adsorption capacity of 44.7 mg protein/g beads. The adsorbed lipase on beads retained up to 67.4% of its initial activity. The immobilized lipase exhibited improved thermal and storage stabilities over those of the free enzyme. The immobilized lipase could desorb 1.0 M NaCl solution at pH 8.0, and the sulfonated beads can be repeatedly charged with fresh enzyme after inactivation upon use.     

Preparation and characterization of immobilized lipase on magnetic hydrophobic microspheres

A novel magnetic poly(vinyl acetate (VAc)–divinyl benzene (DVB)) material (8–34 μm) was synthesized by copolymerization of vinyl acetate and divinyl benzene using oleic acid-stabilized magnetic colloids as magnetic cores. The magnetic colloids and the copolymer microspheres were characterized with transmission and scanning electron microscopes, respectively. Magnetization of the microspheres could be described by the Langevin function. All the observations indicated that the microspheres were superparamagnetic. Magnetic sedimentation of the microspheres was achieved within 3 min, over 300 times faster than the gravitational sedimentation. Candida cylindracea lipase (CCL) was immobilized to the porous carrier at up to 6750 IU/g carrier, remarkably higher than the previous studies. The pH and temperature dependencies of the immobilized CCL were investigated and the optimum temperature and pH for the immobilized CCL were determined. Activity amelioration of the immobilized CCL for the hydrolysis of olive oil was observed, indicating an interfacial activation of the enzyme after immobilization. Moreover, the immobilized CCL showed enhanced thermal stability and good durability in the repeated use after recovered by magnetic separations.     

Covalent immobilization of glucose oxidase onto poly(styrene-co-glycidyl methacrylate) monodisperse fluorescent microspheres synthesized by dispersion polymerization

In this study, micron-sized poly(styrene-co-glycidyl methacrylate) (PSt-GMA) fluorescent microspheres of 5.1microm in diameter were synthesized via dispersion polymerization of styrene and glycidyl methacrylate in the presence of 1,4-bis(5-phenyloxazol-2-yl) benzene (POPOP), which provided surface functional groups for covalent immobilization of enzymes. In an effort to study the biocompatibility of the microspheres' surface, glucose oxidase and beta-d-(+)-glucose were selected as a catalytic system for enzymatic assays. A colorimetric method was adopted in evaluating enzymatic activity by introducing horseradish peroxidase (HRP). Both the immobilization amount and the apparent activity of immobilized glucose oxidase from Aspergillus niger (GOD) were determined at different conditions. The results show that the immobilized enzymes retained approximately 28 to 34% activity, as compared with free enzymes, without pronounced alteration of the optimum pH and temperature. Kinetics studies show that the corresponding values of K(m) and V(max) are 23.2944 mM and 21.6450M/min.mg GOD for free enzymes and 35.1780 mM and 15.4799M/min.mg GOD for immobilized enzymes. The operational stability studies show that immobilized GOD could retain nearly 50% initial activity after being washed 20 times. The results suggest that the resultant PSt-GMA fluorescent microspheres provide a suitable surface for covalent immobilizing biomolecules; therefore, they have the potential of being used in fluorescence-based immunoassays in high-throughput screening or biosensors.     

Use of chemically modified PMMA microspheres for enzyme immobilization

Modified poly(methyl methacrylate) (PMMA) microspheres, about 7microm in diameter, carrying aldehyde groups on their surfaces were synthesized and used as the support for enzyme immobilization. The immobilizing behavior as well as the properties of immobilized enzyme was studied. The amount of bound enzyme can be extended to 76.8mg g(-1) support, which is relatively much higher than other supports. The kinetic investigation derived from three typical models shows that the practical process is more complicated than the ideal condition, with one or more interactions being involved in the immobilization process. The K(m) value is actually larger and V(max) is smaller in the immobilized form than those in the free form. The increased resistance of the immobilized enzyme against the changes of temperature indicates that immobilizing enzyme onto the modified microspheres is useful for enzyme immobilization.     

Enhancing performance of lipase immobilized on methyl-modified silica aerogels at the adsorption and catalysis processes: Effect of cosolvents

Hydrophobic silica aerogels modified with methyl group were applied as support to immobilize Candida rugosa lipase (CRL). At the adsorption process, different alcohols were used to intensify the immobilization of CRL. The results showed that n-butanol wetting the hydrophobic support prior to contacting with enzyme solution could promote lipase activity, but the adsorption quantity onto the support decreased. Based on this, a novel immobilization method was proposed: the support contacted with enzyme solution without any alcohols, and then the immobilized enzymes were activated by 90% (V) n-butanol solution. The experimental results showed that this method could keep high adsorption quantity (413.0 mg protein/g support) and increase the lipase specific activity by more than 50%. To improve the stability of immobilized lipase, the support after adsorption was contacted with n-octane to form an oil layer covering the immobilized lipases, thus the leakage can be decreased from over 30–4% within 24 h. By utilizing proper cosolvents, a high enzyme activity and loading capacity as well as little loss of lipase was achieved without covalent linkage between the lipase and the support. This is known to be an excellent result for immobilization achieved by physical adsorption only.     

Facile surface functionalization of multiwalled carbon nanotubes by soft dielectric barrier discharge plasma: Generate compatible interface for lipase immobilization

To create compatible interface for enzyme immobilization, the surface of multi-walled carbon nanotubes (MWCNTs) was functionalized using soft technique dielectric barrier discharge plasma (DBDP) for carboxylation and amination; followed by further amidation of carboxyl group with alkylamine. Successful functionalization and enzyme immobilization were structurally confirmed using spectroscopic analysis Fourier-Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS). The immobilization of Candida rugosa lipase (CRL) on functionalized MWCNTs was evidenced by clearly viewing with Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM) imaging. CRL showed more Freundlich equilibrium behavior upon immobilization on annealed and octadecylamidated MWCNTs, which suggested a multilayer adsorption; while upon physical adsorption on aminated and carboxylated MWCNTs, CRL, to more extent, demonstrated a Langmuir equilibrium property, producing an enzyme monolayer. It was proven that DBDP-mediated surface-functionalization could create compatible microenvironments for enzyme immobilization, resulted in improved specific activity and thermostability. The immobilized CRL on octadecylamidated MWCNTs displayed excellent reusability and operation stability, indicating its potential for industrial application.     

Immobilization of Candida rugosa lipase on poly(allyl glycidyl ether-co-ethylene glycol dimethacrylate) macroporous polymer particles

Macroporous polymer particles containing surface epoxy groups were synthesized for immobilization of Candida rugosa lipase (CRL). The effect of incorporation of two different sets of monomers [allyl glycidyl ether (AGE) and glycidyl methacrylate (GMA)] and the effect of crosslinking density on immobilization of lipase were studied. AGE-co-EGDM polymers gave higher binding and expression of lipase than GMA-co-EGDM polymers. Optimization of immobilization parameters was done with respect to immobilization time and enzyme loading. Amongst AGE-co-EGDM polymer series, AGE-150 polymer found to give maximum lipase activity yield and therefore evaluated for temperature, pH and storage stability. Under optimum conditions, AGE-150 polymer gave 78.40% of activity yield. Immobilized lipase on AGE-150 showed a broader pH, higher temperature and excellent storage stability.     

Lipase immobilization on magnetic microspheres via spacer arms: Effect of steric hindrance on the activity

Poly(styrene-acrylic acid) magnetic microspheres with an average diameter of 2 μm were successfully prepared and used as carriers to immobilize lipase. Lipase immobilized on microspheres with no spacer arm exhibited low activities, which were attributed to steric hindrance on the lipase conformation. To avoid steric effects, ethylenediamine and poly(ethylene glycol) (PEG) 400/800/4000 were utilized as spacer arms to bind the lipase to the microspheres. The immobilized lipase activities were improved using PEG 800/4000 as a spacer arm. Furthermore, the influence of enzyme loading on lipase activity was investigated, and the results indicated that enzyme overloading could exert steric effect on lipase activity. The degree of PEG modification was demonstrated to affect lipase activity because excess PEG on the surface of microspheres could interact with lipase due to its mobility, consequently reducing lipase activity.     

Immobilization of porcine pancreatic lipase on glycidyl methacrylate grafted poly vinyl alcohol

Graft copolymerization of glycidyl methacrylate (GMA) on to polyvinyl alcohol (PVA) using benzophenone (BP) as initiator was carried out. Grafted PVA was used as carrier for pancreatic lipase immobilization. The effects of GMA and BP concentrations as well as grafting reaction times on grafting yields and activities of the immobilized lipase were determined. The influence of enzyme concentrations was also studied. The optimal conditions for the grafting reaction were: 1 h at 15 mM BP and 2.3 M GMA, the optimum enzyme concentration for immobilization was 1 mg/ml. After optimization of the immobilization process a physical and chemical characterization of the immobilized enzyme was performed. Furthermore, the thermal, pH, storage and operational stability of the immobilized enzyme in comparison to the free form was tested.     

Immobilization of lipase on epoxy activated (1-->3)-alpha-D-glucan isolated from Penicillium chrysongenum

A water-insoluble linear (1-->3)-alpha-D-glucan was isolated from Penicillium mycelia. Three kinds of epoxy-activated microspheres of this glucan were prepared as supports for Candida sp. lipase (EC3.1.1.3) immobilization. The highest immobilization yield was 36.4%. The specific activity was 26.85 U/mg, and only 4.1% of activity was lost in comparison with the free enzyme used for immobilization. The higher thermal stability, storage stability, and reusability of the immobilized lipase make it a potential candidate for wide application.     

Immobilization of Candida antarctica lipase B (CALB) on surface-modified rice husk ashes (RHA) via physical adsorption and cross-linking methods

In the present study, the recovery of activity of Candida antarctica lipase B (CALB) immobilized onto surface-modified rice husk ash (RHA) was 90% for both cross-linking and adsorption methods. Both cross-linked and adsorbed immobilized preparations were very stable, retaining more than 48% of their activity over the range of temperatures studied. The optimum temperature and optimum pH values were 37?°C and 7.0, respectively for both immobilized preparations, while the relative activities after storage at 4.0?°C for 60 days were 55% and 65% using cross-linking and adsorption methods, respectively. Also, the activity of the immobilized lipase began to decrease after 10 cycles, more than 58% of the initial activities were still retained after 10 cycles for both immobilization methods. These results indicated that lipase immobilized by cross-linking and adsorption not only effected activity recovery, but also remarkably effected stability, reusability and application adaptability. It can be concluded that, surface-modified RHA can be used as alternative supports for immobilization of CALB for polymerization reactions.     

Effect of reaction parameters on synthesis of citronellyl methacrylate by lipase-catalyzed transesterification

The methacrylate ester of citronellol was synthesized using various lipases as catalyst. The effect of different reaction parameters such as amount of lipase, solvent, temperature, and acylating agent on the conversion of citronellol to citronellyl methacrylate was studied. Methyl methacrylate, vinyl methacrylate, and 2,3-butanedione mono-oxime methacrylate were used as acylating agents. Porcine pancreatic lipase (PPL), Candida rugosa lipase (CRL), and Pseudomonas cepacia lipase (Amano-PS) were used as biocatalysts. Diisopropyl ether (DIPE) was found to be the most suitable solvent. The stereoselectivity of CRL in transesterification of (+/-)-citronellol was tested for the optimized reaction parameters.     

Synthesis of a mesoporous functional copolymer bead carrier and its properties for glucoamylase immobilization

A series of mesoporous and hydrophilic novel bead carriers containing epoxy groups were synthesized by modified inverse suspension polymerization. Glycidyl methacrylate and acryloyloxyethyl trimethyl ammonium chloride were used as the monomers, and divinyl benzene, allyl methacrylate, and ethylene glycol dimethacrylate as crosslinking agents, respectively. The resulting carriers were employed in the immobilization of glucoamylase (Glu) with covalent bond between epoxy groups and enzymes. The activity recovery of the three series of immobilized Glus could reach 76%, 79%, and 86%, respectively. The immobilized Glus exhibit excellent stability and reusability than that of the free ones.     

Reversible immobilization of glucoamylase onto magnetic chitosan nanocarriers

A simple preparation process for the monodispersed pH-sensitive core-shell magnetic microspheres was carried out consisting of chitosan self-assembled on magnetic iron oxide nanoparticles. Meanwhile, glucoamylase was immobilized as a model enzyme on this carrier of Fe₃O₄/CS microspheres by ionic adsorption. The morphology, inner structure, and high magnetic sensitivity of the resulting magnetic chitosan microspheres were studied, respectively, with a field emission scanning electron microscope (SEM), transmission electron microscope (TEM), FT-IR spectroscopy, thermogravimetric analysis (TGA), and a vibrating sample magnetometer (VSM). Subsequently, the properties of glucoamylase immobilized on the regenerated supports were also investigated by determining storage stability, pH stability, reusability, magnetic response, and regeneration of supports. The results from characterization and determination remarkably indicated that the immobilized glucoamylase obtained presents excellent storage stability, pH stability, reusability, magnetic response, and regeneration of supports. Therefore, this kind of magnetic Fe₃O₄/CS microspheres with perfect monodispersity should be an ideal support for enzyme immobilization.     

Application and characterization of magnetic chitosan microspheres for enhanced immobilization of cellulase

In this study, a unique carrier magnetic chitosan microspheres (MCTS) was simply synthesized by anchoring Fe₃O₄ onto chitosan for direct immobilization of cellulases cross-linked by gluteraldehye. The structure and morphology were characterized using FT-IR, TGA, VSM and SEM. The optimum immobilization conditions were investigated: immobilized pH 7.0, amount of enzyme 15?mL (0.1?mg/mL), immobilization temperature 30?°C, immobilization time 5?h. At optimum conditions, MCTS achieved maximum enzyme solid loading rate of 73.5?mg/g, while recovery of enzyme activity approached to 71.6%. In the recycle test, immobilized cellulases operated without significant loss in its initial performances after 3 cycles, which indicated that immobilized cellulases can be regenerated and reused. The immobilized enzyme has better values of thermal and storage stability than that of free enzyme. Therefore, MCTS may be considered as a candidate with potential value of application in large-scale operations for cellulases immobilization.