Methane storage in homogeneous armchair open-ended single-walled boron nitride nanotube triangular arrays: a grand canonical Monte Carlo simulation study

The physisorption of methane in homogeneous armchair open-ended SWBNNT triangular arrays was evaluated using grand canonical ensemble Monte Carlo simulation for tubes 11.08, 13.85, 16.62, and 19.41 ? [(8,8), (10,10), (12,12), and (14,14), respectively] in diameter, at temperatures of 273, 298, 323, and 373 K, and at fugacities of 0.5-9.0 Mpa. The intermolecular forces were modeled using the Lennard-Jones potential model. The absolute, excess, and delivery adsorption isotherms of methane were calculated for the various boron nitride nanotube arrays. The specific surface areas and the isosteric heats of adsorption, Q(st), were also studied, different isotherm models were fitted to the simulated adsorption data, and the model parameters were correlated. According to the results, it is possible to reach 108% and 140% of the US Department of Energy's target for CH(4) storage (180 v/v at 298 K and 35 bar) using the SWBNNT array with nanotubes 16.62 and 19.41 ? in diameter, respectively, as adsorbent. The results show that for a van der Waals gap of 3.4 ?, there is no interstitial adsorption except for arrays containing nanotubes with diameters of >15.8 ?. Multilayer adsorption starts to occur in arrays containing nanotubes with diameters of >16.62 ?, and the minimum pressure required for multilayer adsorption is 1.0 MPa. A brief comparison of the methane adsorption capacities of single-walled carbon and boron nitride nanotube arrays was also performed.     

Comparative prediction of binding affinity of Hydroxyurea anti-cancer to boron nitride and carbon nanotubes as smart targeted drug delivery vehicles

Abstract

In this study, the adsorption of Hydroxyurea (HU) onto the inner and outer surfaces of boron nitride and carbon nanotubes (CNTs) was investigated using the density functional theory calculations and molecular dynamics (MDs) simulations in aqueous solution. The values of the adsorption energy show that HU molecule is preferentially adsorbed inside of boron nitride and CNTs with the molecular axis parallel to the tubes axis, which means that the cavity of nanotubes is favorable for encapsulation of this drug. Also, it was found that the HU/boron nitride nanotube (BNNT) system is more stable than the HU/CNT system. The stability of the complexes of HU/ BNNT attributed to the formation of the intermolecular hydrogen bonds between the H atoms of HU molecule and the N atoms of BNNT, which is confirmed by Bader’s quantum theory of atoms in molecules. The natural bond orbital analysis shows the charge transfers occur from HU molecule to nanotubes in all complexes. Moreover, the adsorption of HU molecule on the surfaces of the nanotubes was investigated by explicit water models. Also, the adsorption behavior of HU on the functionalized boron nitride and CNTs is investigated to design and develop new nanocarriers for biomedical applications. Furthermore, MDs simulations are examined in the presence of one and two drug molecules. The obtained results illustrate that the lowest value of Lennard–Jones (L–J) energy between drug and nanotubes exist in the simulation system with two drug molecules.     

Molecular insight into adsorption affinities of Carmustine drug on boron and nitrogen doped functionalized single-walled carbon nanotubes using density functional theory including dispersion correction calculations and molecular dynamics simulation

Abstract

We report a quantum mechanics calculation and molecular dynamics simulation study of Carmustine drug (BNU) adsorption on the surface of nitrogen (N) and boron (B) doped-functionalized single-walled carbon nanotubes. The stability of the optimized complexes is determined on the basis of relative adsorption energy (ΔE_ads). The ΔE_ads results claim that drug molecule tends to adsorb on the nitrogen and boron doped functionalized tubes with the energy values in the range of ?61.177 to ?95.806?kJ/mol. Based on the obtained results, it is observed that N-doping compared with B-doping has improved more effectively drug absorption on the surface of functionalized nanotube. The results of Atoms in Molecule calculations indicate that drug adsorbs molecularly via hydrogen bonds interactions on the surface doped-functionalized carbon nanotubes. Moreover, molecular dynamics simulation is performed to investigate the dynamics behavior of the drug molecules on the nitrogen-doped functionalized carbon nanotube (f-NNT) and functionalized carbon nanotube (f-CNT). The higher average calculated electrostatic and van der Waals energies as well as higher number of intermolecular hydrogen bonds in BNU-f-NNT in comparison with BNU-f-CNT model suggest the more effectual interaction between drug molecules and nitrogen-doped functionalized carbon nanotube.

Communicated by Ramaswamy H. Sarma     

Can trans-polyacetylene be formed on single-walled carbon-doped boron nitride nanotubes?

Recently, the grafting of polymer chains onto nanotubes has attracted increasing attention as it can potentially be used to enhance the solubility of nanotubes and in the development of novel nanotube-based devices. In this article, based on density functional theory (DFT) calculations, we report the formation of trans-polyacetylene on single-walled carbon-doped boron nitride nanotubes (BNNTs) through their adsorption of a series of C(2)H(2) molecules. The results show that, rather than through [2 + 2] cycloaddition, an individualmolecule would preferentially attach to a carbon-doped BNNT via "carbon attack" (i.e., a carbon in the C(2)H(2) attacks a site on the BNNT). The adsorption energy gradually decreases with increasing tube diameter. The free radical of the carbon-doped BNNT is almost completely transferred to the carbon atom at the end of the adsorbed C(2)H(2) molecule. When another C(2)H(2) molecule approaches the carbon-doped BNNT, it is most energetically favorable for this C(2)H(2) molecule to be adsorbed at the end of the previously adsorbed C(2)H(2) molecule, and so on with extra C(2)H(2) molecules, leading to the formation of polyacetylene on the nanotube. The spin of the whole system is always localized at the tip of the polyacetylene formed, which initiates the adsorption of the incoming species. The present results imply that carbon-doped BNNT is an effective "metal-free" initiator for the formation of polyacetylene.     

On the elastic properties of single-walled carbon nanotubes/poly(ethylene oxide) nanocomposites using molecular dynamics simulations

Molecular dynamics simulations are used to study the physical and mechanical properties of single-walled carbon nanotubes/poly(ethylene oxide) nanocomposites. The effects of nanotube atomic structure, diameter, and volume fraction on the polymer density distribution, polymer atom distribution, stress–strain curves of nanocomposites and Young’s, and shear moduli of single-walled carbon nanotubes/poly(ethylene oxide) nanocomposites are explored. It is shown that the density of polymer, surrounding the nanotube surface, has a peak near the nanotube surface. However, increasing distance leads to dropping it to the value near the density of pure polymer. It is seen that for armchair nanotubes, the average polymer atoms distances from the single-walled carbon nanotubes are larger than the polymer atom distance from zigzag nanotubes. It further is shown that zigzag nanotubes are better candidates to reinforce poly (ethylene oxide) than their armchair counterparts.     

Molecular dynamics simulations on hydrogen adsorption in finite single walled carbon nanotube bundles

Molecular dynamics simulations of the adsorption of hydrogen molecules in finite single-walled carbon nanotube bundles are presented using a curvature dependent force field. The heat of formation and the effective adsorption capacity are expressed as a function of H₂ distance from adsorbent. The heat of adsorption decreases rapidly with the distance and increasing H₂ loading results in weakening adsorption strength. The effects of nanotube packing and bundle thickness on hydrogen adsorption strength were investigated and the results show that the heat of adsorption can be improved slightly if hydrogen molecules are placed in thicker and inhomogeneously packed nanotube bundles. Only very small diameter nanotube bundles were found to hold promise for significant hydrogen storage for onboard applications.     

Structural and functional imaging with carbon nanotube AFM probes

Atomic force microscopy (AFM) has great potential as a tool for structural biology, a field in which there is increasing demand to characterize larger and more complex biomolecular systems. However, the poorly characterized silicon and silicon nitride probe tips currently employed in AFM limit its biological applications. Carbon nanotubes represent ideal AFM tip materials due to their small diameter, high aspect ratio, large Young's modulus, mechanical robustness, well-defined structure, and unique chemical properties. Nanotube probes were first fabricated by manual assembly, but more recent methods based on chemical vapor deposition provide higher resolution probes and are geared towards mass production, including recent developments that enable quantitative preparation of individual single-walled carbon nanotube tips [J. Phys. Chem. B 105 (2001) 743]. The high-resolution imaging capabilities of these nanotube AFM probes have been demonstrated on gold nanoparticles and well-characterized biomolecules such as IgG and GroES. Using the nanotube probes, new biological structures have been investigated in the areas of amyloid-beta protein aggregation and chromatin remodeling, and new biotechnologies have been developed such as AFM-based haplotyping. In addition to measuring topography, chemically functionalized AFM probes can measure the spatial arrangement of chemical functional groups in a sample. However, standard silicon and silicon nitride tips, once functionalized, do not yield sufficient resolution to allow combined structural and functional imaging of biomolecules. The unique end-group chemistry of carbon nanotubes, which can be arbitrarily modified by established chemical methods, has been exploited for chemical force microscopy, allowing single-molecule measurements with well-defined functionalized tips.     

Neon atoms oscillating inside carbon and boron nitride nanotubes: a fully atomistic molecular dynamics investigation

In the present work, based on extensive fully atomistic molecular dynamics simulations, we discuss the dynamics of neon atoms oscillating inside (5,5) single-walled carbon nanotubes (CNTs) and boron nitride nanotubes (BNNTs). Our results show that sustained high-frequency oscillatory regimes are possible for a large range of temperatures. Our results also show that the general features of the oscillations are quite similar to those observed in CNT and BNNT, in contrast with some speculations in previous works in the literature about the importance of broken symmetry and chirality exhibited by BNNTs.     

The solvation study of carbon, silicon and their mixed nanotubes in water solution

Nanotubes are believed to open the road toward different modern fields, either technological or biological. However, the applications of nanotubes have been badly impeded for the poor solubility in water which is especially essential for studies in the presence of living cells. Therefore, water soluble samples are in demand. Herein, the outcomes of Monte Carlo simulations of different sets of multiwall nanotubes immersed in water are reported. A number of multi wall nanotube samples, comprised of pure carbon, pure silicon and several mixtures of carbon and silicon are the subjects of study. The simulations are carried out in an (N,V,T) ensemble. The purpose of this report is to look at the effects of nanotube size (diameter) and nanotube type (pure carbon, pure silicon or a mixture of carbon and silicon) variation on solubility of multiwall nanotubes in terms of number of water molecules in shell volume. It is found that the solubility of the multi wall carbon nanotube samples is size independent, whereas multi wall silicon nanotube samples solubility varies with diameter of the inner tube. The higher solubility of samples containing silicon can be attributed to the larger atomic size of silicon atom which provides more direct contact with the water molecules. The other affecting factor is the bigger inter space (the space between inner and outer tube) in the case of silicon samples. Carbon type multi wall nanotubes appeared as better candidates for transporting water molecules through a multi wall nanotube structure, while in the case of water adsorption problems it is better to use multi wall silicon nanotubes or a mixture of multi wall carbon/ silicon nanotubes.     

Thermal ablation therapeutics based on CN(x) multi-walled nanotubes

We demonstrate that nitrogen doped, multi-walled carbon nanotubes (CN(x)-MWNT) result in photo-ablative destruction of kidney cancer cells when excited by near infrared (NIR) irradiation. Further, we show that effective heat transduction and cellular cytotoxicity depends on nanotube length: effective NIR coupling occurs at nanotube lengths that exceed half the wavelength of the stimulating radiation, as predicted in classical antenna theory. We also demonstrate that this radiation heats the nanotubes through induction processes, resulting in significant heat transfer to surrounding media and cell killing at extraordinarily small radiation doses. This cell death was attributed directly to photothermal effect generated within the culture, since neither the infrared irradiation itself nor the CN(x)-MWNT were toxic to the cells.     

Atomistic Simulations of Uniaxial Tensile Behaviors of Single-walled Carbon Nanotubes

Atomistic simulations, using the second-generation reactive empirical bond order (REBO) potential, are performed to investigate the uniaxial tensile behaviors of single-walled carbon nanotubes (SWCNTs). It is found that the effect of the nanotube diameters on the elastic modulus, the tensile strength and the stress vs. strain relation of SWCNTs is small yet noticeable. However, the effect of the degree of helicity is significant.     

Predicting doxorubicin drug delivery by single-walled carbon nanotube through cell membrane in the absence and presence of nicotine molecules: a molecular dynamics simulation study

Abstract

In order to study the interaction of the anticancer agent Doxorubicin with the single-walled carbon nanotubes with different diameters as drug delivery systems, the molecular dynamics (MD) simulations have been used. Also, for design and development of intracellular Doxorubicin drug delivery systems, a series of steered MD simulations are applied to explore the possibility of encapsulated Doxorubicin–carbon nanotube penetration through a lipid bilayer in presence and absence of Nicotine molecules at different pulling rates. Our simulation results showed that in spite of the adsorption of drug molecules on the outer sidewall of the nanotubes, the spontaneous localization of one Doxorubicin molecule into the cavity of the nanovectors with larger diameters is observed. It is found that the presence of Nicotine molecules in extracellular medium increases the required force for pulling nanotube-encapsulated drug as well as the required time for penetration process, especially at higher velocity. Also, the entering process of the Nicotine molecules into the carbon nanotube causes that the encapsulated drug molecule is fully released in the hydrophobic phase of the lipid bilayer.

Communicated by Ramaswamy H. Sarma     

Rosette nanotubes show low acute pulmonary toxicity in vivo

Nanotubes are being developed for a large variety of applications ranging from electronics to drug delivery. Common carbon nanotubes such as single-walled and multi-walled carbon nanotubes have been studied in the greatest detail but require solubilization and removal of catalytic contaminants such as metals prior to being introduced to biological systems for medical application. The present in vivo study characterizes the degree and nature of inflammation caused by a novel class of self-assembling rosette nanotubes, which are biologically inspired, naturally water-soluble and free of metal content upon synthesis. Upon pulmonary administration of this material we examined responses at 24 h and 7d post-exposure. An acute inflammatory response is triggered at 50 and 25 microg doses by 24 h post-exposure but an inflammatory response is not triggered by a 5 microg dose. Lung inflammation observed at a 50 microg dose at 24 h was resolving by 7d. This work suggests that novel nanostructures with biological design may negate toxicity concerns for biomedical applications of nanotubes. This study also demonstrates that water-soluble rosette nanotube structures represent low pulmonary toxicity, likely due to their biologically inspired design, and their self-assembled architecture.     

Rapid microwave synthesis of chitosan modified carbon nanotube composites

Chitosan modified multi-walled carbon nanotube composites were synthesized under microwave irradiation. The resultant chitosan modified multi-walled carbon nanotube composites were purified by twice adjusting of pH value of the solution and centrifugating in succession. The surface functional groups of chitosan modified multi-walled carbon nanotube composites are confirmed by Fourier transform infrared spectroscopy and UV–vis spectroscopy. Transmission electron microscopic images further show the morphologic changes of the carbon nanotubes. Thermal gravimetric analysis shows that the chitosan content in the chitosan modified multi-walled carbon nanotube composites is much higher than conventional methods. The whole reaction procedure can be completed in 1 h under microwave irradiation.     

The interaction between nerve cells and carbon nanotube networks made by CVD process investigation

In this research we investigate neuroblastoma cells cultivated on single-walled carbon nanotubes networks made by CVD method on silicon substrates. The complex analysis of grown cells made by atomic force, electron microscopy and Raman spectroscopy was carried out and the effect of nanotube growth process on proliferation factor was investigated. It is shown that despite of a weak decrease in proliferation, cell morphology remains unchanged and no physical or chemical interaction between carbon nanotubes and cells is observed. The results of the research can be used to investigate the interaction between conductive nano- materials and cells for the development of neural replacement implants. Also they can be useful in bio-electronic interface investigation of signal propagation in neurons.     

Adsorption mechanism and collapse propensities of the full-length, monomeric Aβ(1-42) on the surface of a single-walled carbon nanotube: a molecular dynamics simulation study

Though nanomaterials such as carbon nanotubes have gained recent attention in biology and medicine, there are few studies at the single-molecule level that explore their interactions with disease-causing proteins. Using atomistic molecular-dynamics simulations, we have investigated the interactions of the monomeric Aβ(1-42) peptide with a single-walled carbon nanotube of small diameter. Starting with peptide-nanotube complexes that delineate the interactions of different segments of the peptide, we find rapid convergence in the peptide's adsorption behavior on the nanotube surface, manifested in its arrested movement, the convergence of peptide-nanotube contact areas and approach distances, and in increased peptide wrapping around the nanotube. In systems where the N-terminal domain is initially distal from nanotube, the adsorption phenomena are initiated by interactions arising from the central hydrophobic core, and precipitated by those arising from the N-terminal residues. Our simulations and free energy calculations together demonstrate that the presence of the nanotube increases the energetic favorability of the open state. We note that the observation of peptide localization could be leveraged for site-specific drug delivery, while the decreased propensity of collapse appears promising for altering kinetics of the peptide's self-assembly.     

Conjugates between photosystem I and a carbon nanotube for a photoresponse device

Photosystem I (PS I) is a large pigment–protein complex embedded in the thylakoid membranes that performs light-driven electron transfer across the thylakoid membrane. Carbon nanotubes exhibit excellent electrical conductivities and excellent strength and stiffness. In this study, we generated PSI–carbon nanotube conjugates dispersed in a solution aimed at application in artificial photosynthesis. PS I complexes in which a carbon nanotube binding peptide was introduced into the middle of the PsaE subunit were conjugated on a single-walled carbon nanotube, orienting the electron acceptor side to the nanotube. Spectral and photoluminescence analysis showed that the PS I is bound to a single-walled carbon nanotube, which was confirmed by transmission electron microscopy. Photocurrent observation proved that the photoexcited electron originated from PSI and transferred to the carbon nanotube with light irradiation, which also confirmed its orientated conjugation. The PS I–carbon nanotube conjugate will be a useful nano-optoelectronic device for the development of artificial systems.     

Boron nitride nanotube-based biosensor for acetone detection: molecular structural mechanics-based simulation

In this study, an ultra-sensitive biosensor based on a single-walled boron nitride nanotube (SWBNNT) structure is proposed for acetone detection. The molecular structural mechanics-based simulation approach has been used to model the atomic structure of SWBNNTs. The cantilevered and bridged configurations of SWBNNT-based biosensor have been considered for analysis. The resonant frequency shift due to attached mass has been analysed for the mass-based detection of acetone molecules. The present simulation approach is validated by comparing obtained simulated results with the continuum mechanics-based analytical results. Along with detection of the attached molecule, identification of its intermediate landing position along the length of the nanotube is equally important for the better performance of the biosensor systems. The frequency shift-based analysis has been reported for the mass-based detection of acetone molecules as well as its intermediate landing position along the length of the nanotube. The resonant frequency shift variations of the higher order modes of vibration for both the considered configurations of SWBNNTs have been assistive for the identification of intermediate landing position of the acetone molecule. The proposed molecular structural mechanics-based simulation approach is found to be very effectual in terms of simulation of the real atomic structures of the nanotube. The proposed biosensor can achieve extremely high sensitivity at molecular level and it can be potentially used for real-time sensing capability for the acetone concentration for future health monitoring.     

Molecular dynamics analysis on tensile properties of carbon nanotubes with different cracks

Molecular dynamics simulation is employed for the axial tension of single-walled carbon nanotubes (SWCNTs) with different cracks. The cracks of SWCNTs in this study actually are the crack-like defects. AIREBO potential is used to simulate the interactions among carbon atoms. The effects of the crack length, temperature, strain rate and tube diameter on the mechanical properties of SWCNTs are studied. It is found that the failure stress and failure strain decrease with the increase of crack length. And the results show that the failure stress and failure strain are related to the applied strain rate and affected by temperature especially by lower temperature. It is also revealed that the failure stress increases with the increase in tube diameter. The deformation behaviours of SWCNTs are also obtained.     

Bioluminescent assay for toxicological assessment of nanomaterials

A new method for assessing biotoxicity of nanomaterials, based on the use of soluble bioluminescent coupled enzyme system NAD(P)?H:FMN oxidoreductase and luciferase, is proposed. The results of this study indicate a significant adverse biological effect exerted by nanoparticles at the molecular level. It was found that the most toxic nanoparticles the nanoparticles are based on copper and copper oxide, as well as single-walled carbon nanotubes and multi-walled carbon nanofibers, which are referred to hazard class II.