The solution structure of a cyclic endothelin antagonist, BQ-123, based on 1H-1H and 13C-1H three bond coupling constants.

A cyclic pentapeptide endothelin antagonist, cyclo(dTrp-dAsp-Pro-dVal-Leu), recently reported (K. Ishikawa et al., 13th Am. Pept. Symp., Cambridge MA, 1991) has been studied by NMR spectroscopy and molecular modeling. A stable structure has been determined without the use of nuclear Overhauser effects and is based primarily on homonuclear and heteronuclear three bond coupling constants. The 13C-edited TOCSY experiment is demonstrated at natural abundance and approximately 30 mM peptide concentrations. Three bond 13C-1H coupling constants obtained by this method are shown to reduce the ambiguity in phi angle determination which exists when only interproton coupling constants are used. Three out of four phi angles were determined uniquely by this method and the fourth was reduced to two possible values. The proline phi angle was determined to be -78 degrees based on the 3JH alpha, H beta and 3JH alpha, H beta coupling constants. Comparison of amide proton temperature dependence, chemical shifts and vicinal proton coupling constants in a 20% acetonitrile/80% water solvent mixture and in (CD3)2SO indicates that the structure is similar in both solvents.     

NMR investigations of proline and its derivatives. 4-Proton magnetic resonance parameters and structure of acetyl-proline amide.

The proton magnetic resonance (PMR) spectrum of acetyl-proline amide in D2O solution has been analysed by computer simulation. The spectra of the cis and the trans isomers have been separated and their PMR parameters (chemical shift and coupling constants) are given. Vicinal coupling constants of the pyrrolidine ring are interpreted by means of a Karplus zone relation. The chemical shift effect of the anisotropy of both peptide planes is considered. It follows that both isomers are puckered with Cgamma in an endo position, but the cis isomer is more rigid than the trans isomer, which moreover undergoes a small interconversion of the Cgamma and Cdelta atoms between two extreme spatial positions. The dihedral angle phi has different values in both isomers. Thus, the dihedral angle between the two peptide planes is smaller in the trans isomer than in the cis isomer.     

Analysis of phi and chi 1 torsion angles for hen lysozyme in solution from 1H NMR spin-spin coupling constants

Three-bond 3JHN alpha coupling constants have been determined for 106 residues and 3J alpha beta coupling constants have been measured for 57 residues of the 129-residue protein hen egg white lysozyme. These NMR data have been compared with torsion angles defined in the tetragonal and the triclinic crystal forms of the protein. For most residues the measured 3JHN alpha values were consistent with the phi torsion angles found in both crystal forms; the RMS difference between the coupling constants calculated by using the tetragonal crystal structure phi angles and the experimental 3JHN alpha values is 0.88 Hz. Thus there appears to be no significant averaging of the phi torsion angle either in the interior or at the surface of the protein. For 41 of the residues where 3J alpha beta coupling constants have been determined, the values are consistent with a single staggered conformation about the chi 1 torsion angle and there is complete agreement between the NMR data in solution and the torsion angles defined in the crystalline state. In contrast, for the other 16 residues where 3J alpha beta coupling constant values have been measured, the data indicate extensive motional averaging about the chi 1 torsion angle. These residues occur largely on the surface of the protein and examination of the crystal structures shows that many of these residues adopt a different conformation in the triclinic and tetragonal crystal forms and have high crystallographic temperature factors. It appears, however, that in solution conformational flexibility of the side chains of surface residues is significantly more pronounced than in individual crystal structures.     

Conformational properties of biologically active melanostatin analogs

On the basis of the two-dimensional 1H NMR studies the conformation of melanocyte inhibiting hormone (HCl.Pro-Leu-Gly-NH2, MIF) and its five analogues with p-substituted phenylalanine has been determined. Structure-antidepressant activity relationship (examined by the Porsolt test) of MIF and its analogues has been estimated by means of the multivariate statistical analysis, the vicinal spin coupling constants, which determine phi and chi dihedral angles of the second amino acid and phi and dihedral angle of glycine, being selected as structural parameters. It is shown that a biologically active conformation (10-membered beta-turn II) is realized for the considered peptides.     

Conformation of secretin in dimethyl sulfoxide solution. NMR studies and restrained molecular dynamics

The solution conformation of the 27-residue polypeptide hormone secretin in dimethyl sulfoxide has been determined on the basis of 1H-NMR measurements. The experimental data set used in the structure determination consisted of 98 nuclear-Overhauser-enhancement-derived interproton and dihedral angle restraints from coupling constants. The NH-NH and H alpha-NH NOEs were determined from build-up rates, while the remaining distances were classified in a qualitative manner. The structure calculations consisted of two phases. First, dynamical simulated annealing calculations were carried out to find conformations of the peptide which satisfy NOE and phi dihedral restraints. The convergence of ten calculated structures was good except for those regions of the molecule where NOE data were not unambiguous. From the calculated set another initial structure was built which was again minimized in several 5-ps calculations now employing the full empirical energy function. The resulting structures of secretin reveal conformationally well-defined regions, but not a single uniform secondary structure. The structure is different from the calculated structure from trifluoroethanol/water measurements.     

Design, synthesis and solution structure of a renin inhibitor. Structural constraints from NOE, and homonuclear and heteronuclear coupling constants combined with distance geometry calculations.

A macrocyclic renin inhibitor was designed using molecular modeling and a model of human renin. The synthesized molecular displayed poor binding affinity. To investigate the reasons for the observed inactivity, the structure of the compound has been studied by NMR spectroscopy and distance geometry. Structural constraints for distance geometry calculations were derived from nuclear Overhauser effects and homonuclear and heteronuclear three bond coupling constants. Homonuclear coupling constants were measured directly from the resolution-enhanced proton spectra and heteronuclear coupling constants were measured from the natural abundance 15N- and 13C-edited TOCSY experiments. One phi angle was determined uniquely by this method and two were reduced to two possible values each. By using a statistical analysis of 400 structures generated with distance geometry, two families of structures were found to be consistent with the NMR data. The solution structures so derived were different from the originally designed structure, including an internal hydrogen bond. This provides a possible explanation for the lack of effectiveness of this compound.     

Dihedral angles of tripeptides in solution directly determined by polarized Raman and FTIR spectroscopy

The amide I mode of the peptide linkage is highly delocalized in peptides and protein segments due to through-bond and through-space vibrationally coupling between adjacent peptide groups. J. Phys. Chem. B. 104:11316-11320) used coherent femtosecond infrared (IR) spectroscopy to determine the excitonic coupling energy and the orientational angle between the transition dipole moments of the interacting amide I modes of cationic tri-alanine in D(2)O. Recently, the same parameters were determined for all protonation states of tri-alanine by analyzing the amide I bands in the respective IR and isotropic Raman spectra (. J. Am. Chem. Soc. 119:1720-1726.). In both studies, the dihedral angles phi and psi were then obtained by utilizing the orientational dependence of the coupling energy obtained from ab initio calculations on tri-glycine in vacuo (. J. Raman Spectrosc. 29:81-86) to obtain an extended 3(1) helix-like structure for the tripeptide. In the present paper, a novel algorithm for the analysis of excitonic coupling between amide I modes is presented, which is based on the approach by Schweitzer-Stenner et al. but avoids the problematic use of results from ab initio calculations. Instead, the dihedral angles are directly determined from infrared and visible polarized Raman spectra. First, the interaction energy and the corresponding degree of wave-function mixing were obtained from the amide I profile in the isotropic Raman spectrum. Second, the depolarization ratios and the amide I profiles in the anisotropic Raman and IR-absorption spectra were used to determine the orientational angle between the peptide planes and the transition dipole moments, respectively. Finally, these two geometric parameters were utilized to determine the dihedral angles phi and psi between the interacting peptide groups. Stable extended conformations with dihedral angles in the beta-sheet region were obtained for all protonation states of tri-alanine, namely phi(+) = -126 degrees, psi(+) = 178 degrees; phi(+/-) = -110 degrees, psi(+/-) = 155 degrees; and phi(-) = -127 degrees, psi(-) = 165 degrees for the cationic, zwitterionic, and anionic state, respectively. These values reflect an extended beta-helix structure. Tri-glycine was found to be much more heterogeneous in that different extended conformers coexist in the cationic and zwitterionic state, which yield a noncoincidence between isotropic and anisotropic Raman scattering. Our study introduces vibrational spectroscopy as a suitable tool for the structure analysis of peptides in solution and tripeptides as suitable model systems for investigating the role of local interactions in determining the propensity of peptide segments for distinct secondary structure motifs.     

Determination of the local structure of the protein insectotoxin I5A from the scorpion Buthus eupeus from 1H-NMR spectroscopy data

The local structure (torsion angles phi, psi and chi 1 of amino acid residues) of insectotoxin I5A (35 residues) of scorpion Buthus eupeus has been determined from cross-peak integral intensities in two-dimensional nuclear Overhauser enhancement (NOESY) spectra and spin coupling constants of vicinal H--NC alpha--H and H--C alpha C beta--H protons. The local structure determination was carried out by fitting complete relaxation matrix of peptide unit protons (protons of a given residue and NH proton of the next residue in the amino acid sequence) with experimental NOESY cross-peak intensities. The obtained intervals of backbone torsional angles phi and psi consistent with NMR data were determined for all but Gly residues. The predominant C alpha--C beta rotamer of the side chain has been unambiguously determined for 42% of the insectotoxin amino acid residues whereas for another 46% residues experimental data are fitted equally well with two rotamers. Stereospecific assignments were obtained for 38% of beta-methylene groups. The determined torsional angles phi, psi and chi 1 correspond to the sterically allowed conformations of the amino acid residues and agree with the insectotoxin secondary structure established earlier by 1H NMR spectroscopy.     

Solution structure of microcin J25, the single macrocyclic antimicrobial peptide from Escherichia coli.

The three-dimensional solution structure of microcin J25, the single cyclic representative of the microcin antimicrobial peptide class produced by enteric bacteria, was determined using two-dimensional 1H NMR spectroscopy and molecular modeling. This hydrophobic 21-residue peptide exhibits potent activity directed to Gram-negative bacteria. Its primary structure, cyclo(-V1GIGTPISFY10GGGAGHVPEY20F-), has been determined previously [Blond, A., Péduzzi, J., Goulard, C., Chiuchiolo, M. J., Barthélémy, M., Prigent, Y., Salomón, R.A., Farías, R.N., Moreno, F. & Rebuffat, S. (1999) Eur. J. Biochem., 259, 747-755]. Conformational parameters (3JNHCalphaH coupling constants, quantitative nuclear Overhauser enhancement data, chemical shift deviations, temperature coefficients of amide protons, NH-ND exchange rates) were obtained in methanol solution. Structural restraints consisting of 190 interproton distances inferred from NOE data, 11 phi backbone dihedral angle and 9 chi1 angle restraints derived from the coupling constants and three hydrogen bonds in agreement with the amide exchange rates were used as input for simulated annealing calculations and energy minimization in the program XPLOR. Microcin J25 adopts a well-defined compact structure consisting of a distorted antiparallel beta sheet, which is twisted and folded back on itself, thus resulting in three loops. Residues 7-10 and 17-20 form the more regular part of the beta sheet. The region encompassing residues Gly11-His16 consists of a distorted beta hairpin, which divides into two small loops and is stabilized by an inverse gamma turn and a type I' beta turn. The reversal of the chain leading to the Phe21-Pro6 loop results from a mixed beta/gamma turn. A cavity, in which the hydrophilic Ser8 side-chain is confined, is delimited by two crab pincer-like regions that comprise residues 6-8 and 18-1.     

Combined use of homo- and heteronuclear coupling constants as restraints in molecular dynamics simulations.

A penalty function for scalar coupling constants has been applied in molecular dynamics simulations as an experimental constraint. The function is based on the difference between the coupling constant calculated from the dihedral angle and the experimentally measured coupling constant. The method is illustrated on a model cyclic pentapeptide for which 3JHN-H alpha and 3JHN-C beta, both about the phi backbone dihedral angle, have been measured. The function is efficient in producing structures consistent with the scalar couplings, but removed from the conformation observed in solution. This arises from the lack of J restraints for the psi dihedral angle. Simulations with both nuclear Overhauser effect (NOE) and J-coupling restraints illustrates small but significant differences from simulations using only NOEs.     

Conformation of the glycotripeptide repeating unit of antifreeze glycoprotein of polar fish as determined from the fully assigned proton n.m.r. spectrum

With its simple glycotripeptide repeating structure the antifreeze glycoprotein of polar fish may be an especially simple conformational mode for mucin glycoproteins with similar but more complex structures. The fully assigned proton n.m.r. spectrum confirms the anomeric configurations of the hexapyranosidic sugars of the side chains and the coupling constants of the alpha GalNAc and the beta Gal residues show both to be in the expected 4C1 chair conformation. The assignment of a single resonance for each proton of the (Ala-Thr-Ala)n repeat unit coupled with the observation of long range nuclear Overhauser effects (n.O.e.) implies a three-fold repeating conformation. The resonances of the two alanines are distinct and can be assigned to their correct positions in the peptide sequence by n.O.e. observed at the amide proton resonances on saturation of the alpha proton signals. The amide proton coupling constants of all three peptide residues are similar and imply a limited range of peptide backbone torsion angles, phi CN. The large n.O.e. which has been observed between the amide proton and the alpha proton of the residue preceding it in the sequence implies large positive values for the peptide dihedral angle, psi CC. Limits are placed on possible values of side chain dihedral angles by the observation of the coupling constant between the alpha and beta protons of the threonyl residue. The observation of n.O.e. between the anomeric proton of GalNAc and the threonyl side chain protons gives information on the conformation of the alpha glycosidic linkage between the disaccharide and the peptide. n.O.e. observed between the protons of the beta glycosidic linkage indicates the conformation of the disaccharide and the large amide proton coupling constant of the GalNAc residue shows a trans proton relationship. The spectroscopically derived data have been combined with conformational energy calculations to give a conformational model for antifreeze glycoprotein in which the hydrophobic surfaces of the disaccharide side chains are wrapped closely against a three-fold left handed helical peptide backbone. The hydrophilic sides of the disaccharides are aligned so that they may bind to the ice crystal face, which is perpendicular to the fast growth axis inhibiting normal crystal growth.     

NMR structures of a nonapeptide from DNA binding domain of human polymerase-alpha determined by iterative complete-relaxation-matrix approach.

Nuclear magnetic resonance structures of a nonapeptide, ERFKCPCPT, selected from the DNA binding domain of human polymerase-alpha, were determined by complete relaxation matrix analysis of transverse NOE data. The structures exhibit a type III turn with residues KCPC, and the remaining residues exhibit non-ordered structures. The turn was confirmed by alpha, N (i,i+3) connectivity, a low temperature coefficient of NH chemical shift (-3.1 x 10(-3)) of the fourth residue, 3J(NHalpha) coupling constants, and characteristic CD peaks at 228 and 200 nm. Furthermore, phi and psi dihedral angles for the i + 1, and i + 2 residues of the turn are found to be -80 and -41 and -60 and -40 degrees. The first proline residue is trans- while the second exists in both cis- and trans- configurations, with trans- being more than 80% populated. The trans-configuration was established from C5alpha-P6alpha correlation and phi and psi angles of the proline. The five-membered proline ring is in DOWN puckered (C-beta-exo/C-gamma-endo) conformation. The structure of the peptide reveals that the two cysteine thiols are approximately 5 A(o) apart and appropriately positioned to covalently bind cis-diamminedichloroplatinum(II), a widely used anti-cancer drug.     

Orientation of a beta-hairpin antimicrobial peptide in lipid bilayers from two-dimensional dipolar chemical-shift correlation NMR

The orientation of a beta-sheet membrane peptide in lipid bilayers is determined, for the first time, using two-dimensional (2D) (15)N solid-state NMR. Retrocyclin-2 is a disulfide-stabilized cyclic beta-hairpin peptide with antibacterial and antiviral activities. We used 2D separated local field spectroscopy correlating (15)N-(1)H dipolar coupling with (15)N chemical shift to determine the orientation of multiply (15)N-labeled retrocyclin-2 in uniaxially aligned phosphocholine bilayers. Calculated 2D spectra exhibit characteristic resonance patterns that are sensitive to both the tilt of the beta-strand axis and the rotation of the beta-sheet plane from the bilayer normal and that yield resonance assignment without the need for singly labeled samples. Retrocyclin-2 adopts a transmembrane orientation in dilauroylphosphatidylcholine bilayers, with the strand axis tilted at 20 degrees +/- 10 degrees from the bilayer normal, but changes to a more in-plane orientation in thicker 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidyl-choline (POPC) bilayers with a tilt angle of 65 degrees +/- 15 degrees . These indicate that hydrophobic mismatch regulates the peptide orientation. The 2D spectra are sensitive not only to the peptide orientation but also to its backbone (phi, psi) angles. Neither a bent hairpin conformation, which is populated in solution, nor an ideal beta-hairpin with uniform (phi, psi) angles and coplanar strands, agrees with the experimental spectrum. Thus, membrane binding orders the retrocyclin conformation by reducing the beta-sheet curvature but does not make it ideal. (31)P NMR spectra of lipid bilayers with different compositions indicate that retrocyclin-2 selectively disrupts the orientational order of anionic membranes while leaving zwitteronic membranes intact. These structural results provide insights into the mechanism of action of this beta-hairpin antimicrobial peptide.     

Calibration of the angular dependence of the amide proton-C alpha proton coupling constants, 3JHN alpha, in a globular protein. Use of 3JHN alpha for identification of helical secondary structure

The vicinal amide proton-C alpha proton spin-spin coupling constants, JHN alpha, in the globular protein basic pancreatic trypsin inhibitor (BPTI) have been measured using phase-sensitive correlated spectroscopy at high digital resolution. In conjunction with the crystal structure of BPTI, these data were used to calibrate the correlation between 3JHN alpha and the dihedral angle phi. The resulting "BPTI curve" is 3JHN alpha = 6.4 cos2 theta - 1.4 cos theta + 1.9 (theta = [phi - 60 degrees]). It is further shown that measurement of the spin-spin couplings 3JHN alpha presents an independent, reliable method for identification of the location of helical structure in the amino acid sequence of proteins.     

Structure-functional studies of polymyxins. (1)-NMR analysis of polymyxin B and M conformation]

Spatial structures of two polymyxin antibiotics are compared by means of one- and two-dimensional 1H NMR spectroscopy. Cyclic parts of polymyxins B and M contain a system of hydrogen bonds including two beta-turns, however, the analysis of coupling constants 3JHN-C alpha H demonstrated that torsional angles phi of peptide bonds of the residues forming beta-turns in polymyxin M depend on the type of the anion. An increase in lability of the polymyxin M cyclic part in comparison with polymyxin B correlated with the selective cleavage of the peptide bond Dab8-Dab9 of this antibiotic with subtilisin. A similar correlation was found for a short analogue of polymyxin B, a cycloheptapeptide.     

Molecular dynamics simulations of an oligosaccharide using a force field modified for carbohydrates

Parameterization of the phi and omega torsion angles in pyranosidic saccharides was performed based on density functional theory calculations. The modified CHARMM force field, which is referred to as PARM22/SU01, was tested on a glucosyl trisaccharide. A molecular dynamics simulation of the oligosaccharide with explicit water as solvent was performed to investigate the conformational flexibility. Protonz.sbnd;proton distances and heteronuclear spin-spin coupling constants were calculated from the trajectories and showed good agreement to those previously determined by NMR spectroscopy.     

Tightly winding structure of sequential model peptide for repeated helical region in Samia cynthia ricini silk fibroin studied with solid-state NMR

There are many kinds of silks from silkworms and spiders with different structures and properties, and thus, silks are suitable to study the structure-property relationship of fibrous proteins. Silk fibroin from a wild silkworm, Samia cynthia ricini, mainly consists of the repeated similar sequences by about 100 times where there are alternative appearances of the polyalanine (Ala)(12-13) region and the Gly-rich region. In this paper, a sequential model peptide, GGAGGGYGGDGG(A)(12)GGAGDGYGAG, which is a typical sequence of the silk fibroin, was synthesized, and the atomic-level conformations of Gly residues at the N- and C-terminal ends of the polyalanine region were determined as well as that of the central Ala residue using (13)C 2D spin diffusion solid-state nuclear magnetic resonance (NMR) under off-magic angle spinning. In the model peptide with alpha-helical conformation, the torsion angle of the central Ala residue, the 19th Ala, was determined to be (phi, psi) = (-60 degrees, -50 degrees ), which was a typical alpha-helical structure, but the torsion angles of two Gly residues, the 12th and 25th Gly residues, which are located at the N- and C-terminal ends of the polyalanine region, were determined to be (phi, psi) = (-70 degrees, -30 degrees ) and (phi, psi) = (-70 degrees, -20 degrees ), respectively. Thus, it was observed that the turns at both ends of polyalanine with alpha-helix conformation in the model peptide are tightly wound.     

Structural investigations of a human calcitonin-derived carrier peptide in a membrane environment by solid-state NMR

Previous studies have shown that human calcitonin (hCT) and its C-terminal fragment hCT(9-32) translocate in nasal epithelium. Moreover, hCT(9-32) was used as a carrier to internalize efficiently the green fluorescent protein, drugs, and plasmid DNA. To understand the mechanism of the membrane crossing process, we determined structural parameters of the carrier peptide hCT(9-32) in a membrane environment using solid-state NMR. For that purpose, we synthesized a multiply labeled hCT(9-32) peptide comprising four positions with fully (15)N- and (13)C-labeled amino acids. Multilamellar vesicle samples containing varying mixing ratios of hCT(9-32) and phospholipids found in the plasma membrane of nasal epithelium were prepared. The typical axially symmetric powder patterns of (31)P NMR spectra confirmed the presence of lamellar bilayers in our samples. The chemical shift anisotropy of the (31)P NMR spectra of the samples in the presence of hCT(9-32) is slightly reduced, revealing weak interaction of the peptide with the lipid headgroups. The peptide does not penetrate the lipid membrane as indicated by very similar (2)H NMR order parameters of the phospholipid fatty acid chains in the absence and presence of the carrier peptide. This membrane topology was confirmed by measurements of paramagnetic enhancement of relaxation rates. The conformation of hCT(9-32) was investigated by cross polarization magic angle spinning NMR methods. All peptide signals were resolved and fully assigned in two-dimensional proton-driven (13)C spin diffusion experiments. The isotropic chemical shifts of (13)CO, (13)Calpha, and (13)Cbeta provide information about the secondary structure of the carrier peptide. The conformation of hCT(9-32) was further corroborated by quantitative phi torsion angle measurements. Two monomeric structural models are consistent with the data: (i) a linear backbone conformation of hCT(9-32) and (ii) an antiparallel beta-sheet structure. These structures are maintained over a wide range of peptide:lipid mixing ratios. No direct indications for fibril formation of hCT(9-32) were found. Dipolar coupling measurements indicate rather high amplitudes of motion of the peptide.     

Quantitative pressure injection of picoliter volumes into Limulus ventral photoreceptors.

The conformation of the 14 amino acid peptide hormone somatostatin in aqueous solution was investigated through a proton magnetic resonance (PMR) scalar coupling analysis. Experiments were performed at two fields, 270 and 600 MHz, and included double and triple resonance difference scalar decoupling, resolution enhancement and computer simulation. The agreement between simulated and observed spectra at both fields provided support for the correctness of the analysis. The resultant scalar coupling constants, 3J alpha H-NH and 3J alpha B, gave information on the backbone (phi) and side chain (chi 1) torsional angles, respectively, which eliminated either of the proposed conformations of somatostatin as describing a predominant conformer of the molecule in solution under our conditions.     

Structural and dynamical changes of the bindin B18 peptide upon binding to lipid membranes. A solid-state NMR study

Structural and dynamical features of the B18 peptide from the sea urchin sperm binding protein were determined in the crystalline state and in zwitterionic lipid bilayers at a peptide:lipid molar ratio of 1:12 using solid-state NMR spectroscopy. The study was focused on three (13)C and (15)N uniformly labeled leucine residues, which were introduced into three different B18 peptides at positions evenly distributed along the B18 primary structure. Isotropic (13)C and (15)N chemical shift measurements showed that while B18 possesses a nonhelical and non-sheet-like structure in the crystalline state, the peptide adopts an oligomeric beta-sheet structure in the membrane in the presence of Zn(2+) ions at high peptide:lipid ratio. Torsion angle measurements for the three leucine sites supported these results, with phi torsion angles between -80 degrees and -90 degrees in the crystalline state and between -110 degrees and -120 degrees in the membrane-bound form. These phi torsion angles determined for membrane-bound B18 are consistent with a parallel beta-sheet secondary structure. Analysis of motionally averaged dipolar coupling measurements established an increase of the mobility in the leucine side chains upon binding to the membrane, whereas the backbone mobility remained essentially unchanged, except in the binding site of Zn(2+) ions. This difference in mobility was related to the H-bond network in the parallel beta-sheet structure, which involves the backbone and excludes the side chains of leucine residues. The parallel beta-sheet structure of B18 in the membrane in the presence of Zn(2+) appears to be an active state for the fusion of zwitterionic membranes in the presence of Zn(2+). A fluorescence fusion assay indicated that high B18 concentrations are required to induce fusion in these systems. Therefore, it was hypothesized that the oligomeric beta-sheet secondary structure revealed in the study represents an active state of the peptide in a membrane environment during fusion.