Physical association of the catalytic and helper modules of a family-9 glycoside hydrolase is essential for activity

Clostridium thermocellum cellulase 9I (Cel9I) is a non-cellulosomal tri-modular enzyme, consisting of a family-9 glycoside hydrolase (GH9) catalytic module and two family-3 carbohydrate-binding modules (CBM3c and CBM3b). The presence of CBM3c was previously shown to be essential for activity, however the mechanism by which it functions is unclear. We expressed the three recombinant modules independently in Escherichia coli and examined their interactions. Non-denaturing gel electrophoresis, isothermal titration calorimetry, and affinity purification of the GH9-CBM3c complex revealed a specific non-covalent binding interaction between the GH9 module and CBM3c. Their physical association was shown to recover 60-70% of the intact Cel9I endoglucanase activity.

Structured summary:

MINT-6946626:Cel9I (uniprotkb:Q02934) and Cel9I (uniprotkb:Q02934) bind (MI:0407) by comigration in non-denaturing gel electrophoresis (MI:0404)MINT-6946649:Cel9I (uniprotkb:Q02934) and Cel9I (uniprotkb:Q02934) bind (MI:0407) by molecular sieving (MI:0071)MINT-6946687:Cel9I (uniprotkb:Q02934) and Cel9I (uniprotkb:Q02934) bind (MI:0407) by isothermal titration calorimetry (MI:0065)MINT-6946706:Cel9I (uniprotkb:Q02934) binds (MI:0407) to Cel9I (uniprotkb:Q02934) by pull down (MI:0096)     

The role of carbohydrate-binding module (CBM) repeat of a multimodular xylanase (XynX) from Clostridium thermocellum in cellulose and xylan binding

A non-cellulosomal xylanase from Clostridium thermocellum, XynX, consists of a family-22 carbohydratebinding module (CBM22), a family-10 glycoside hydrolase (GH10) catalytic module, two family-9 carbohydrate-binding modules (CBM9-I and CBM9-II), and an S-layer homology (SLH) module. E. coli BL21(DE3) (pKM29), a transformant carrying xynX', produced several truncated forms of the enzyme. Among them, three major active species were purified by SDS-PAGE, activity staining, gel-slicing, and diffusion from the gel. The truncated xylanases were different from each other only in their C-terminal regions. In addition to the CBM22 and GH10 catalytic modules, XynX(1) had the CBM9-I and most of the CBM9-II, XynX(2) had the CBM9-I and about 40% of the CBM9-II, and XynX(3) had about 75% of the CBM9-I. The truncated xylanases showed higher binding capacities toward Avicel than those toward insoluble xylan. XynX(1) showed a higher affinity toward Avicel (70.5%) than XynX(2) (46.0%) and XynX(3) (42.1%); however, there were no significant differences in the affinities toward insoluble xylan. It is suggested that the CBM9 repeat, especially CBM9-II, of XynX plays a role in xylan degradation in nature by strengthening cellulose binding rather than by enhancing xylan binding.     

Function of the family-9 and family-22 carbohydrate-binding modules in a modular beta-1,3-1,4-glucanase/xylanase derived from Clostridium stercorarium Xyn10B

Clostridium stercorarium Xyn10B having hydrolytic activities on xylan and beta-1,3-1,4-glucan is a modular enzyme composed of two family-22 carbohydrate-binding modules (CBMs), a family-10 catalytic module of the glycoside hydrolases, a family-9 CBM, and two S-layer homologous modules, consecutively from the N-terminus. We investigated the function of family-9 and family-22 CBMs in a modular enzyme by comparing the enzymatic properties of a truncated enzyme composed of two family-22 CBMs and the catalytic module (rCBM22-CM), an enzyme composed of the catalytic module and family-9 CBM (rCM-CBM9), an enzyme composed of two family-22 CBMs, the catalytic module, and family-9 CBM (rCBM22-CM-CBM9), and the catalytic module polypeptide (rCM). Although the addition of family-9 CBM to rCM and rCBM22-CM did not significantly change catalytic activity toward xylan and beta-1,3-1,4-glucan, the addition of family-22 CBM to rCM and rCM-CBM9 drastically enhanced catalytic activity toward xylan and especially beta-1,3-1,4-glucan. Furthermore, the addition of family-22 CBM to rCM and rCM-CBM9 shifted the optimum temperature from 65 degrees C to 75 degrees C, but that of family-9 CBM to rCM and rCBM22-CM did not affect the optimum temperature. These facts suggest that the enzyme properties of Xyn10B were mainly dependent on the presence of the family-22 CBMs but not family-9 CBM.     

Functions of family-22 carbohydrate-binding module in Clostridium thermocellum Xyn10C

Clostridium thermocellum xylanase Xyn10C (formerly XynC) is a modular enzyme, comprising a family-22 carbohydrate-binding module (CBM), a family-10 catalytic module of the glycoside hydrolases, and a dockerin module responsible for cellulosome assembly consecutively from the N-terminus. To study the functions of the CBM, truncated derivatives of Xyn10C were constructed: a recombinant catalytic module polypeptide (rCM), a family-22 CBM polypeptide (rCBM), and a polypeptide composed of the family-22 CBM and CM (rCBM-CM). The recombinant proteins were characterized by enzyme and binding assays. Although the catalytic activity of rCBM-CM toward insoluble xylan was four times higher than that of rCM toward the same substrate, removal of the CBM did not severely affect catalytic activity toward soluble xylan or beta-1,3-1,4-glucan. rCBM showed an affinity for amorphous celluloses and insoluble and soluble xylan in qualitative binding assays. The optimum temperature of rCBM-CM was 80 degrees C and that of rCM was 60 degrees C. These results indicate that the family-22 CBM of C. thermocellum Xyn10C not only was responsible for the binding of the enzyme to the substrates, but also contributes to the stability of the CM in the presence of the substrate at high temperatures.     

Influence of a mannan binding family 32 carbohydrate binding module on the activity of the appended mannanase

In general, cellulases and hemicellulases are modular enzymes in which the catalytic domain is appended to one or more noncatalytic carbohydrate binding modules (CBMs). CBMs, by concentrating the parental enzyme at their target polysaccharide, increase the capacity of the catalytic module to bind the substrate, leading to a potentiation in catalysis. Clostridium thermocellum hypothetical protein Cthe_0821, defined here as C. thermocellum Man5A, is a modular protein comprising an N-terminal signal peptide, a family 5 glycoside hydrolase (GH5) catalytic module, a family 32 CBM (CBM32), and a C-terminal type I dockerin module. Recent proteomic studies revealed that Cthe_0821 is one of the major cellulosomal enzymes when C. thermocellum is cultured on cellulose. Here we show that the GH5 catalytic module of Cthe_0821 displays endomannanase activity. C. thermocellum Man5A hydrolyzes soluble konjac glucomannan, soluble carob galactomannan, and insoluble ivory nut mannan but does not attack the highly galactosylated mannan from guar gum, suggesting that the enzyme prefers unsubstituted β-1,4-mannoside linkages. The CBM32 of C. thermocellum Man5A displays a preference for the nonreducing ends of mannooligosaccharides, although the protein module exhibits measurable affinity for the termini of β-1,4-linked glucooligosaccharides such as cellobiose. CBM32 potentiates the activity of C. thermocellum Man5A against insoluble mannans but has no significant effect on the capacity of the enzyme to hydrolyze soluble galactomannans and glucomannans. The product profile of C. thermocellum Man5A is affected by the presence of CBM32.     

Molecular and Biochemical Analyses of CbCel9A/Cel48A,a Highly Secreted Multi-Modular Cellulase by Caldicellulosiruptor bescii during Growth on Crystalline Cellulose

During growth on crystalline cellulose, the thermophilic bacterium Caldicellulosiruptor bescii secretes several cellulose-degrading enzymes. Among these enzymes is CelA (CbCel9A/Cel48A), which is reported as the most highly secreted cellulolytic enzyme in this bacterium. CbCel9A/Cel48A is a large multi-modular polypeptide, composed of an N-terminal catalytic glycoside hydrolase family 9 (GH9) module and a C-terminal GH48 catalytic module that are separated by a family 3c carbohydrate-binding module (CBM3c) and two identical CBM3bs. The wild-type CbCel9A/Cel48A and its truncational mutants were expressed in Bacillus megaterium and Escherichia coli, respectively. The wild-type polypeptide released twice the amount of glucose equivalents from Avicel than its truncational mutant that lacks the GH48 catalytic module. The truncational mutant harboring the GH9 module and the CBM3c was more thermostable than the wild-type protein, likely due to its compact structure. The main hydrolytic activity was present in the GH9 catalytic module, while the truncational mutant containing the GH48 module and the three CBMs was ineffective in degradation of either crystalline or amorphous cellulose. Interestingly, the GH9 and/or GH48 catalytic modules containing the CBM3bs form low-density particles during hydrolysis of crystalline cellulose. Moreover, TM3 (GH9/CBM3c) and TM2 (GH48 with three CBM3 modules) synergistically hydrolyze crystalline cellulose. Deletion of the CBM3bs or mutations that compromised their binding activity suggested that these CBMs are important during hydrolysis of crystalline cellulose. In agreement with this observation, seven of nine genes in a C. bescii gene cluster predicted to encode cellulose-degrading enzymes harbor CBM3bs. Based on our results, we hypothesize that C. bescii uses the GH48 module and the CBM3bs in CbCel9A/Cel48A to destabilize certain regions of crystalline cellulose for attack by the highly active GH9 module and other endoglucanases produced by this hyperthermophilic bacterium.     

The N-terminal family 22 carbohydrate-binding module of xylanase 10B of Clostridium themocellum is not a thermostabilizing domain

Xylanase Xyn10B from Clostridium thermocellum is a modular enzyme that contains two family 22 carbohydrate binding modules N- (CBM22-1) and C- (CBM22-2) terminal of the family 10 glycoside hydrolase catalytic domain (GH10). In a previous study, we showed that removal of CBM22-1 reduces the resistance to thermoinactivation of the enzyme suggesting that this module is a thermostabilizing domain. Here, we show that it is the module border on the N-terminal side of GH10 that confers resistance to thermoinactivation and to proteolysis. Therefore, CBM22-1 does not function as a thermostabilizing domain and the role for this apparently non-functional CBM remains elusive.     

Functions of family-22 carbohydrate-binding modules in Clostridium josui Xyn10A

Clostridium josui xylanase Xyn10A is a modular enzyme comprising two family-22 carbohydrate-binding modules (CBMs), a family-10 catalytic module (CM), a family-9 CBM, and two S-layer homologous modules, consecutively from the N-terminus. To study the functions of the family-22 CBMs, truncated derivatives of Xyn10A were constructed: a recombinant CM polypeptide (rCM), a family-22 CBM polypeptide (rCBM), and a polypeptide composed of the family-22 CBMs and CM (rCBM-CM). Recombinant proteins were characterized by enzyme and binding assays. rCBM-CM showed the highest activity toward xylan and weak activity toward some polysaccharides such as barley beta-glucan and carboxymethyl-cellulose. Although rCBM showed an affinity for insoluble and soluble xylan as well as barley beta-glucan and Avicel in qualitative binding assays, removal of the CBMs negligibly affected the catalytic activity and thermostability of the CM.     

Cloning of the Ruminococcus albus cel5D and cel9A genes encoding dockerin module-containing endoglucanases and expression of cel5D in Escherichia coli

An EcoRI chromosomal DNA fragment of Ruminococcus albus F-40 that conferred endoglucanase activity on Escherichia coli was cloned. An open reading frame (ORF1) and another incomplete reading frame (ORF2) were found in the EcoRI fragment. The ORF2 was completed using inverse PCR genome walking technique. ORF1 and ORF2, which confront each other, encoded cellulases belonging to families 5 and 9 of the glycoside hydrolases and were designated cel5D and cel9A respectively. The cel5D gene encodes 753 amino acids with a deduced molecular weight of 83,409. Cel5D consists of a signal peptide of 24 amino acids, a family-5 catalytic module, a dockerin module, and two family-4 carbohydrate-binding modules (CBMs). The cel9A gene encodes 936 amino acids with a deduced molecular weight of 104,174, consisting of a signal peptide, a family-9 catalytic module, a family-3 CBM, and a dockerin module. The catalytic module polypeptide (rCel5DCat) derived from Cel5D was constructed, expressed, and purified from a recombinant E. coli. The truncated enzyme hydrolyzed cellohexaose, cellopentaose, and cellotetraose to yield mainly cellotriose and cellobiose with glucose as a minor product, but the enzyme was less active toward cellotriose and not active toward cellobiose, suggesting that this enzyme is a typical endoglucanase. rCel5DCat had a Km of 3.9 mg/ml and a Vmax of 37.2 micromol/min/mg for carboxymethycellulose.     

Comparison of family 9 cellulases from mesophilic and thermophilic bacteria

Cellulases containing a family 9 catalytic domain and a family 3c cellulose binding module (CBM3c) are important components of bacterial cellulolytic systems. We measured the temperature dependence of the activities of three homologs: Clostridium cellulolyticum Cel9G, Thermobifida fusca Cel9A, and C. thermocellum Cel9I. To directly compare their catalytic activities, we constructed six new versions of the enzymes in which the three GH9-CBM3c domains were fused to a dockerin both with and without a T. fusca fibronectin type 3 homology module (Fn3). We studied the activities of these enzymes on crystalline cellulose alone and in complex with a miniscaffoldin containing a cohesin and a CBM3a. The presence of Fn3 had no measurable effect on thermostability or cellulase activity. The GH9-CBM3c domains of Cel9A and Cel9I, however, were more active than the wild type when fused to a dockerin complexed to scaffoldin. The three cellulases in complex have similar activities on crystalline cellulose up to 60°C, but C. thermocellum Cel9I, the most thermostable of the three, remains highly active up to 80°C, where its activity is 1.9 times higher than at 60°C. We also compared the temperature-dependent activities of different versions of Cel9I (wild type or in complex with a miniscaffoldin) and found that the thermostable CBM is necessary for activity on crystalline cellulose at high temperatures. These results illustrate the significant benefits of working with thermostable enzymes at high temperatures, as well as the importance of retaining the stability of all modules involved in cellulose degradation.     

Site-directed mutagenesis of aromatic residues in the carbohydrate-binding module of <Emphasis Type="Italic">Bacillus</Emphasis> endoglucanase EGA decreases enzyme thermostability

The endoglucanase, EGA, from Bacillus sp. AC-1 comprises a glycosyl hydrolase family-9 catalytic module (CM9) and a family-3 carbohydrate-binding module (CBM3). Seven aromatic residues were subjected to site-directed mutagenesis in both CBM3 and EGA to investigate their roles in enzyme thermostability. The complexes generated by mixing CBMY527G, CBMW532A, or CBMF592G with CM9 each lost their activities after 15 min at 45°C, while the wild-type complex retained >70% activity after 2 h. The mutants EGAY527G, EGAW532A, and EGAF592G showed little activity after 15 min at 60°C, whereas EGA remained 70% active after 2 h. Thus the residues Tyr₅₂₇, Trp₅₃₂, and Phe₅₉₂ contribute not only to CBM3-mediated stability of CM9 but also to EGA thermostability suggesting that hydrophobic interaction between the two modules, independent of covalent linkages, is important for enzyme thermostability.     

Essential role of a family-32 carbohydrate-binding module in substrate recognition by Clostridium thermocellum mannanase CtMan5A

The family-5 glycoside hydrolase domain (GH5) and the family-32 carbohydrate-binding module (CBM32) of Clostridium thermocellum mannanase CtMan5A, along with their genetically inactivated derivatives, were collectively or separately expressed. Their catalytic and substrate-binding abilities were measured to investigate importance of CBM32 in substrate recognition by CtMan5A. Characterization of the truncated derivatives of CtMan5A and isothermal calorimetry analysis of the interaction between the inactivated proteins and mannooligosaccharides suggested that GH5 and CBM32 collectively formed a substrate-binding site capable of accommodating a mannotetraose unit in CtMan5A. This suggested that CBM32 directly participated in the substrate recognition required for catalytic action.     

The N-Terminal GH10 Domain of a Multimodular Protein from Caldicellulosiruptor bescii Is a Versatile Xylanase/β-Glucanase That Can Degrade Crystalline Cellulose

The genome of the thermophilic bacterium Caldicellulosiruptor bescii encodes three multimodular enzymes with identical C-terminal domain organizations containing two consecutive CBM3b modules and one glycoside hydrolase (GH) family 48 (GH48) catalytic module. However, the three proteins differ much in their N termini. Among these proteins, CelA (or C. bescii Cel9A [CbCel9A]/Cel48A) with a GH9/CBM3c binary partner in the N terminus has been shown to use a novel strategy to degrade crystalline cellulose, which leads to its outstanding cellulose-cleaving activity. Here we show that C. bescii Xyn10C (CbXyn10C), the N-terminal GH10 domain from CbXyn10C/Cel48B, can also degrade crystalline cellulose, in addition to heterogeneous xylans and barley β-glucan. The data from substrate competition assays, mutational studies, molecular modeling, and docking point analyses point to the existence of only one catalytic center in the bifunctional xylanase/β-glucanase. The specific activities of the recombinant CbXyn10C on Avicel and filter paper were comparable to those of GH9/CBM3c of the robust CelA expressed in Escherichia coli. Appending one or two cellulose-binding CBM3bs enhanced the activities of CbXyn10C in degrading crystalline celluloses, which were again comparable to those of the GH9/CBM3c-CBM3b-CBM3b truncation mutant of CelA. Since CbXyn10C/Cel48B and CelA have similar domain organizations and high sequence homology, the endocellulase activity observed in CbXyn10C leads us to speculate that CbXyn10C/Cel48B may use the same strategy that CelA uses to hydrolyze crystalline cellulose, thus helping the excellent crystalline cellulose degrader C. bescii acquire energy from the environment. In addition, we also demonstrate that CbXyn10C may be an interesting candidate enzyme for biotechnology due to its versatility in hydrolyzing multiple substrates with different glycosidic linkages.     

Cloning, nucleotide sequence and module structure of the gene encoding the cellulose-binding protein B (CBPB) of Eubacterium cellulosolvens 5

The nucleotide sequence of the gene encoding the cellulose-binding protein B (CBPB) of Eubacterium cellulosolvens 5 was determined. The gene consists of an open reading frame of 3,429 nucleotides. The deduced amino acid sequence of CBPB contained one module highly similar to a catalytic module of glycosyl hydrolase family 9 (GHF9), one module partially similar to a family 3 carbohydrate-binding module (CBM3), two linkers, one module similar to a CBM of cellulose-binding protein A (CBPA) from E. cellulosolvens 5, and one module almost identical to a cell wall-binding module (CWBM) of CBPA. The module similar to GHF9 showed CMCase activity, and the modules similar to CBM3 and CBM of CBPA bound to cellulose. Moreover, the module highly similar to CWBM of CBPA bound to the cell walls prepared from E. cellulosolvens 5. The amino acid sequence of CBPB had a significant homology (64.15% sequence identity) with that of CBPA. These results suggest that cbpA and cbpB genes descended from the same ancestral cellulase gene.     

Unusual binding properties of the dockerin module of Clostridium thermocellum endoglucanase CelJ (Cel9D-Cel44A)

Cellulosomes are cellulolytic complexes produced by anaerobic bacteria, and are composed of a scaffolding protein and several catalytic components. The complexes are formed by highly specific interactions of one of the reiterated cohesin modules of the scaffolding protein with a dockerin module of the catalytic components. The affinities of a dockerin module of Clostridium thermocellum CelJ (Cel9D-Cel44A) for several cohesin modules from C. thermocellum and Clostridium josui scaffolding proteins were quantitatively measured by surface plasmon resonance analysis. The recombinant CelJ dockerin-containing protein interacted with three recombinant C. josui cohesin proteins as well as recombinant C. thermocellum cohesin proteins beyond the so-called 'species specificity' of the dockerin and cohesin interactions. However, this protein did not recognize a second cohesin module from the C. josui scaffolding protein, suggesting that the catalytic components are not necessarily arranged randomly on a scaffolding protein in native cellulosomes.     

Molecular and biochemical characterization of <Emphasis Type="Italic">Ba</Emphasis>-EGA,a cellulase secreted by <Emphasis Type="Italic">Bacillus</Emphasis> sp. AC-1 from <Emphasis Type="Italic">Ampullaria crosseans</Emphasis>

A novel gene (Ba-ega) of Bacillus sp. AC-1, encoding an endoglucanase (Ba-EGA), was cloned and expressed in Escherichia coli. Ba-ega, containing a 1,980-bp open reading frame (ORF), encoded a protein of 659 amino acids and had a molecular mass of 74.87 kDa. Ba-EGA was a modular enzyme composed of a family-9 glycosyl hydrolase catalytic module (CM9) and a family-3 carbohydrate-binding module (CBM3). To investigate the functions of the CBM3 and CM9, a number of truncated derivatives of Ba-EGA were constructed, and all were active. The catalytic module (rCM9) alone was less stable at high temperature than the recombinant Ba-EGA (rBa-EGA). The temperature stability for the complex of rCM9 and rCBM3 was still lower than rBa-EGA, but higher than rCM9 alone. These observations indicated the existence of a non-covalent interaction between CM9 and CBM3 that might strengthen the stability of CM9. However, this interaction is not strong enough to mimic the protective effect of the CBM in the wild-type enzyme.     

Clostridium thermocellum cellulase CelT,a family 9 endoglucanase without an Ig-like domain or family 3c carbohydrate-binding module

The celT gene of Clostridium thermocellum strain F1 was found downstream of the mannanase gene man26B [Kurokawa J et al. (2001) Biosci Biotechnol Biochem 65:548–554] in pKS305. The open reading frame of celT consists of 1,833 nucleotides encoding a protein of 611 amino acids with a predicted molecular weight of 68,510. The mature form of CelT consists of a family 9 cellulase domain and a dockerin domain responsible for cellulosome assembly, but lacks a family 3c carbohydrate-binding module (CBM) and an immunoglobulin (Ig)-like domain, which are often found with family 9 catalytic domains. CelT devoid of the dockerin domain (CelTΔdoc) was constructed and purified from a recombinant Escherichia coli, and its enzyme properties were examined. CelTΔdoc showed strong activity toward carboxymethylcellulose (CMC) and barley β-glucan, and low activity toward xylan. The V _max and K _m values were 137 μmol min^–1 mg^–1 and 16.7 mg/ml, respectively, for CMC. Immunological analysis indicated that CelT is a catalytic component of the C. thermocellum F1 cellulosome. This is the first report describing the characterization of a family 9 cellulase without an Ig-like domain or family 3c CBM. Electronic Publication     

CelI,a noncellulosomal family 9 enzyme from Clostridium thermocellum,is a processive endoglucanase that degrades crystalline cellulose

The family 9 cellulase gene celI of Clostridium thermocellum, was previously cloned, expressed, and characterized (G. P. Hazlewood, K. Davidson, J. I. Laurie, N. S. Huskisson, and H. J. Gilbert, J. Gen. Microbiol. 139:307-316, 1993). We have recloned and sequenced the entire celI gene and found that the published sequence contained a 53-bp deletion that generated a frameshift mutation, resulting in a truncated and modified C-terminal segment of the protein. The enzymatic properties of the wild-type protein were characterized and found to conform to those of other family 9 glycoside hydrolases with a so-called theme B architecture, where the catalytic module is fused to a family 3c carbohydrate-binding module (CBM3c); CelI also contains a C-terminal CBM3b. The intact recombinant CelI exhibited high levels of activity on all cellulosic substrates tested, with pH and temperature optima of 5.5 and 70 degrees C, respectively, using carboxymethylcellulose as a substrate. Native CelI was capable of solubilizing filter paper, and the distribution of reducing sugar between the soluble and insoluble fractions suggests that the enzyme acts as a processive cellulase. A truncated form of the enzyme, lacking the C terminal CBM3b, failed to bind to crystalline cellulose and displayed reduced activity toward insoluble substrates. A truncated form of the enzyme, in which both the cellulose-binding CBM3b and the fused CBM3c were removed, failed to exhibit significant levels of activity on any of the substrates examined. This study underscores the general nature of this type of enzymatic theme, whereby the fused CBM3c plays a critical accessory role for the family 9 catalytic domain and changes its character to facilitate processive cleavage of recalcitrant cellulose substrates.     

A Novel Cellulosomal Scaffoldin from Acetivibrio cellulolyticus That Contains a Family 9 Glycosyl Hydrolase

A novel cellulosomal scaffoldin gene, termed cipV, was identified and sequenced from the mesophilic cellulolytic anaerobe Acetivibrio cellulolyticus. Initial identification of the protein was based on a combination of properties, including its high molecular weight, cellulose-binding activity, glycoprotein nature, and immuno-cross-reactivity with the cellulosomal scaffoldin of Clostridium thermocellum. The cipV gene is 5,748 bp in length and encodes a 1,915-residue polypeptide with a calculated molecular weight of 199,496. CipV contains an N-terminal signal peptide, seven type I cohesin domains, an internal family III cellulose-binding domain (CBD), and an X2 module of unknown function in tandem with a type II dockerin domain at the C terminus. Surprisingly, CipV also possesses at its N terminus a catalytic module that belongs to the family 9 glycosyl hydrolases. Sequence analysis indicated the following. (i) The repeating cohesin domains are very similar to each other, ranging between 70 and 90% identity, and they also have about 30 to 40% homology with each of the other known type I scaffoldin cohesins. (ii) The internal CBD belongs to family III but differs from other known scaffoldin CBDs by the omission of a 9-residue stretch that constitutes a characteristic loop previously associated with the scaffoldins. (iii) The C-terminal type II dockerin domain is only the second such domain to have been discovered; its predicted "recognition codes" differ from those proposed for the other known dockerins. The putative calcium-binding loop includes an unusual insert, lacking in all the known type I and type II dockerins. (iv) The X2 module has about 60% sequence homology with that of C. thermocellum and appears at the same position in the scaffoldin. (v) Unlike the other known family 9 catalytic modules of bacterial origin, the CipV catalytic module is not accompanied by a flanking helper module, e.g., an adjacent family IIIc CBD or an immunoglobulin-like domain. Comparative sequence analysis of the CipV functional modules with those of the previously sequenced scaffoldins provides new insight into the structural arrangement and phylogeny of this intriguing family of microbial proteins. The modular organization of CipV is reminiscent of that of the CipA scaffoldin from C. thermocellum as opposed to the known scaffoldins from the mesophilic clostridia. The phylogenetic relationship of the different functional modules appears to indicate that the evolution of the scaffoldins reflects a collection of independent events and mechanisms whereby individual modules and other constituents are incorporated into the scaffoldin gene from different microbial sources.     

Characterization of a cellulase containing a family 30 carbohydrate-binding module (CBM) derived from Clostridium thermocellum CelJ: importance of the CBM to cellulose hydrolysis

Clostridium thermocellum CelJ is a modular enzyme containing a family 30 carbohydrate-binding module (CBM) and a family 9 catalytic module at its N-terminal moiety. To investigate the functions of the CBM and the catalytic module, truncated derivatives of CelJ were constructed and characterized. Isothermal titration calorimetric studies showed that the association constants (K(a)) of the CBM polypeptide (CBM30) for the binding of cellopentaose and cellohexaose were 1.2 x 10(4) and 6.4 x 10(4) M(-1), respectively, and that the binding of CBM30 to these ligands is enthalpically driven. Qualitative analyses showed that CBM30 had strong affinity for cellulose and beta-1,3-1,4-mixed glucan such as barley beta-glucan and lichenan. Analyses of the hydrolytic action of the enzyme comprising the CBM and the catalytic module showed that the enzyme is a processive endoglucanse with strong activity towards carboxymethylcellulose, barley beta-glucan and lichenan. By contrast, the catalytic module polypeptide devoid of the CBM showed negligible activity toward these substrates. These observations suggest that the CBM is extremely important not only because it mediates the binding of the enzyme to the substrates but also because it participates in the catalytic function of the enzyme or contributes to maintaining the correct tertiary structure of the family 9 catalytic module for expressing enzyme activity.