Increased erythritol production in fed-batch cultures of Torula sp. by controlling glucose concentration

The effect of glucose concentration on erythritol production by Torula sp. was investigated. The maximum volumetric productivity of erythritol was obtained at an initial glucose concentration of 300 g l⁻¹ in batch culture. The volumetric productivity was maximal at a controlled glucose concentration of 225 g l⁻¹, reducing the lag time of the erythritol production. A fed-batch culture was established with an initial glucose concentration of 300 g l⁻¹ and with a controlled glucose concentration of 225 g l⁻¹ in medium containing phytic acid as a phosphate source. In this fed-batch culture, a final erythritol production of 192 g l⁻¹ was obtained from 400 g l⁻¹ glucose in 88 h. This corresponded to a volumetric productivity of 2.26 g l⁻¹ h⁻¹ and a 48% yield. Journal of Industrial Microbiology & Biotechnology (2001) 26, 248–252. Received 26 September 2000/ Accepted in revised form 16 January 2001     

Effect of growth rate on the production of<Emphasis Type="SmallCaps">l</Emphasis>-proline in the fed-batch culture of<Emphasis Type="Italic">Corynebacterium acetoacidophilum</Emphasis>

Corynebacterium acetoacidophilum RYU3161 was cultivated in al-histidine-limited fed-batch culture. To investigate the effect of cell growth on thel-proline production, 5l fed-batch culture was performed using an exponential feeding rate to obtain the specific growth rates (μ) of 0.04, 0.06, 0.08, and 0.1 h⁻¹. The results show that the highest production ofl-proline was obtained at μ=0.04 h⁻¹. The specificl-proline production rate (Q_p) increased proportionally as a function of the specific growth rate, but decreased after it revealed the maximum value at μ=0.08 h⁻¹. Thus, the highest productivity ofl-proline was 1.66 g L⁻¹ h⁻¹ at μ=0.08 h⁻¹. The results show that the production of L-proline inC. acetoacidophilum RYU3161 has mixed growth-associated characteristics.     

Recent advances in ABE fermentation: hyper-butanol producing Clostridium beijerinckii BA101

This is an overview of the mutant strain Clostridium beijerinckii BA101 which produces solvents (acetone–butanol–ethanol, ABE) at elevated levels. This organism expresses high levels of amylases when grown on starch. C. beijerinckii BA101 hydrolyzes starch effectively and produces solvent in the concentration range of 27–29 g l⁻¹. C. beijerinckii BA101 has been characterized for both substrate and butanol inhibition. Supplementing the fermentation medium (MP2) with sodium acetate enhances solvent production to 33 g l⁻¹. The results of studies utilizing commercial fermentation medium and pilot plant-scale reactors are consistent with the results using small-scale reactors. Pervaporation, a technique to recover solvents, has been applied to fed-batch reactors containing C. beijerinckii BA101, and solvent production as high as 165 g l⁻¹ has been achieved. Immobilization of C. beijerinckii BA101 by adsorption and use in a continuous reactor resulted in reactor productivity of 15.8 g l⁻¹ h⁻¹. Recent economic studies employing C. beijerinckii BA101 suggested that butanol can be produced at US$0.20–0.25 lb⁻¹ by employing batch fermentation and distillative recovery. Application of new technologies such as pervaporation, fed-batch culture, and immobilized cell reactors is expected to further reduce these prices. Journal of Industrial Microbiology & Biotechnology (2001) 27, 287–291. Received 12 September 2000/ Accepted in revised form 27 January 2001     

The effect of levofloxacin concentration on the development and maintenance of antibiotic-resistant clones of Escherichia coli in chemostat culture

A levofloxacin-sensitive strain of Escherichia coli (broth MIC: 0.0625 mg l⁻¹) was grown in carbon-limited chemostat culture for 316 h (D=0.294 h⁻¹). Hyperresistant strains isolated after 58 and 91 generations of culture retained a 16- to 47-fold increase in tolerance to levofloxacin during antibiotic-free serial batch and continuous culture (20 generations, glucose-limited, D=0.2 h⁻¹). Isolates differed from the original strain in their maximum growth rates in the presence and absence of subinhibitory levels of levofloxacin, protein-banding profiles, and resistance to a range of antibiotics. Competition between resistant isolates and the original sensitive strain was studied in glucose-limited chemostat cultures (D=0.2 h⁻¹). At levofloxacin concentrations less than 0.03 mg l⁻¹, the sensitive strain outcompeted resistant isolates and displaced them from the culture, whereas the reverse was true at higher concentrations. These results have clinical and environmental implications for those administering levofloxacin. Journal of Industrial Microbiology & Biotechnology (2002) 29, 155–162 doi:10.1038/sj.jim.7000295 Received 26 September 2001/ Accepted in revised form 13 June 2002     

Production of lipase by high cell density fed-batch culture of Candida cylindracea

Candida cylindracea NRRL Y-17506 was grown to produce extracellular lipase from oleic acid as a carbon source. Through flask cultures, it was found that the optimum initial oleic acid concentration for cell growth was 20 g l⁻¹. However, high initial concentrations of oleic acid up to 50 g l⁻¹ were not inhibitory. The highest extracellular lipase activity obtained in flask culture was 3.0 U ml⁻¹ after 48 h with 5 g l⁻¹ of initial oleic acid concentration. Fed-batch cultures (intermittent and stepwise feeding) were carried out to improve cell concentration and lipase activity. For the intermittent feeding fed-batch culture, the final cell concentration was 52 g l⁻¹ and the extracellular lipase activity was 6.3 U ml⁻¹ at 138.5 h. Stepwise feeding fed-batch cultures were carried out to simulate an exponential feeding and to investigate the effects of specific growth rate (0.02, 0.04 and 0.08 h⁻¹) on cell growth and lipase production. The highest final cell concentration obtained was 90 g l⁻¹ when the set point of specific growth rate (μ_set) was 0.02 h⁻¹. High specific growth rate (0.04 and 0.08 h⁻¹) decreased extracellular lipase production in the later part of fed-batch cultures due to build-up of the oleic acid oversupplied. The highest extracellular lipase activity was 23.7 U ml⁻¹ when μ_set was 0.02 h⁻¹, while the highest lipase productivity was 0.31 U ml⁻¹ h⁻¹ at μ_set of 0.08 h⁻¹.     

Lactose-induced Production of Human Soluble B Lymphocyte Stimulator (hsBLyS) in E. coli with Different Culture Strategies

Over-production of human soluble B lymphocyte stimulator (hsBLyS) was carried out with four different fed-batch culture strategies using lactose as inducer, instead of IPTG, in a fed-batch culture of Escherichia coli. As lactose acted as both inducer and carbon source, the best and simplest culture strategy was direct feeding of lactose after batch culture, thereby giving hsBLyS at 3.7 g l⁻¹ and a productivity of 0.11 g l⁻¹ h⁻¹. Revisions requested 1 September 2005 and 11 November 2005; Revisions received 7 November 2005 and 4 January 2006     

Optimization of fed-batch fermentation for xylitol production by Candida tropicalis

Xylitol, a functional sweetener, was produced from xylose by biological conversion using Candida tropicalis ATCC 13803. Based on a two-substrate fermentation using glucose for cell growth and xylose for xylitol production, fed-batch fermentations were undertaken to increase the final xylitol concentration. The effects of xylose and xylitol on xylitol production rate were studied to determine the optimum concentrations for fed-batch fermentation. Xylose concentration in the medium (100 g l⁻¹) and less than 200 g l⁻¹ total xylose plus xylitol concentration were determined as optimum for maximum xylitol production rate and xylitol yield. Increasing the concentrations of xylose and xylitol decreased the rate and yield of xylitol production and the specific cell growth rate, probably because of an increase in osmotic stress that would interfere with xylose transport, xylitol flux to secretion to cell metabolism. The feeding rate of xylose solution during the fed-batch mode of operation was determined by using the mass balance equations and kinetic parameters involved in the equations in order to increase final xylitol concentration without affecting xylitol and productivity. The optimized fed-batch fermentation resulted in 187 g l⁻¹ xylitol concentration, 0.75 g xylitol g xylose⁻¹ xylitol yield and 3.9 g xylitol l⁻¹ h⁻¹ volumetric productivity. Journal of Industrial Microbiology & Biotechnology (2002) 29, 16–19 doi:10.1038/sj.jim.7000257 Received 15 October 2001/ Accepted in revised form 30 March 2002     

Production of 1,3-propanediol by Klebsiella pneumoniae from glycerol broth

Broth containing 152 g glycerol l⁻¹ from Candida krusei culture was converted to 1,3-propanediol by Klebsiella pneumoniae. Residual glucose in the broth promoted growth of K. pneumoniae while acetate was inhibitory. After desalination treatment of glycerol broth by electrodialysis, the acetate in the broth was removed. A fed-batch culture with electrodialytically pretreated broth as␣substrate was developed giving 53 g 1,3- propanediol l⁻¹ with a yield of 0.41 g g⁻¹ glycerol and a productivity of 0.94 g l⁻¹ h⁻¹.     

Optimization of erythritol production by Candida magnoliae in fed-batch culture

A two-stage fed-batch process was designed to enhance erythritol productivity by the mutant strain of Candida magnoliae. The first stage (or growth stage) was performed in the fed-batch mode where the growth medium was fed when the pH of the culture broth dropped below 4.5. The second stage (or production stage) was started with addition of glucose powder into the culture broth when the cell mass reached about 75 g dry cell weight l⁻¹. When the initial glucose concentration was adjusted to 400 g l⁻¹ in the production stage, 2.8 g l⁻¹ h⁻¹ of overall erythritol productivity and 41% of erythritol conversion yield were achieved, which represented a fivefold increase in erythritol productivity compared with the simple batch fermentation process. A high glucose concentration in the production phase resulted in formation of organic acids including citrate and butyrate. An increase in dissolved oxygen level caused formation of gluconic acid instead of citric acid. Journal of Industrial Microbiology & Biotechnology (2000) 25, 100–103. Received 25 February 2000/ Accepted in revised form 08 June 2000     

Enhanced 1,3-propanediol production by supply of organic acids and repeated fed-batch culture

In fed-batch culture of Klebsiella pneumoniae, 1,3-propanediol production was growth associated, while the by-products, including lactic acid and ethanol, increased sharply as the cells grew slowly. When the fed-batch culture was supplied with a mixture of organic acids including citrate, fumarate and succinate, cell growth and 1,3-propanediol production increased significantly, whereas the by-products, especially lactic acid and ethanol, decreased sharply. High concentrations of PDO and acetate inhibited cell growth and PDO production. To improve the PDO production, repeated fed-batch culture with addition of the organic acid mixture was performed in a 5-l reactor. The fed-batch culture was repeated five times, and the 1,3-propanediol yield and concentration reached above 0.61 mol mol⁻¹ and 66 g l⁻¹, respectively, in 20 h for each cycle. Furthermore, the PDO productivity reached above 3.30 g l⁻¹ h⁻¹ in each cycle, which was much higher than that of the original fed-batch culture.     

Lipid production by <Emphasis Type="Italic">Rhodosporidium toruloides</Emphasis> Y4 using different substrate feeding strategies

Microbial lipid is a potential alternative feedstock for the biodiesel industry. New culture strategies remain to be developed to improve the economics of microbial lipid technology. This work describes lipid production by the oleaginous yeast Rhodosporidium toruloides Y4 using a 15-l bioreactor with different substrate feeding strategies. Among these strategies, the intermittent feeding mode gave a lipid productivity of 0.36 g l⁻¹ h⁻¹, whereas the constant glucose concentration II (CC-II) mode gave the highest lipid productivity of 0.57 g l⁻¹ h⁻¹. The repeated fed-batch mode according to the CC-II mode was performed with a duration time of 358 h, and the overall lipid productivity was 0.55 g l⁻¹ h⁻¹. Our results suggested that substrate feeding modes had a great impact on lipid productivity and that the repeated fed-batch process was the most appealing method by which to enhance microbial lipid production.     

Decrease of proteolytic degradation of recombinant hirudin produced by Pichia pastoris by controlling the specific growth rate

The effects of the specific growth rate and methanol concentration on the degradation of hirudin produced by recombinant Pichia pastoris were investigated. When a methanol-limited state and the specific growth rate of 0.02 h^–1 were maintained during the fermentation, a minimum degradation of hirudin and a maximum specific hirudin production rate were achieved. By this strategy, the production of intact recombinant hirudin Hir65 reached 0.7 g l^–1 in fed-batch fermentation. Its proportion was 35% to all forms of hirudin.     

Ammonium and phosphate limitation in 1,3-propanediol production by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

Excretion of 1,3-propanediol (1,3-PD) by K. pneumoniae was compared in ammonium- and phosphate-limited chemostat cultures running with an excess of glycerol. 59 and 43% catabolic flux were directed to 1,3-PD in ammonia-limited cultures and phosphate-limited cultures at dilution rate of 0.1 h⁻¹, respectively. Ammonia-limited fed-batch cultures produced 61 g 1,3-PD l⁻¹ and a total of 15 g l⁻¹ organic acid in 36 h. However, phosphate-limited fed-batch cultures excreted 61 g lactate l⁻¹ and 44 g 1,3-PD l⁻¹.     

Production of antithrombotic hirudin in <Emphasis Type="Italic">GAL1</Emphasis>-disrupted <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

A gratuitous strain was developed by disrupting the GAL1 gene (galactokinase) of recombinant Saccharomyces cerevisiae harboring the antithrombotic hirudin gene in the chromosome under the control of the GAL10 promoter. A series of glucose-limited fed-batch cultures were carried out to examine the effects of glucose supply on hirudin expression in the gratuitous strain. Controlled feeding of glucose successfully supported both cell growth and hirudin expression in the gratuitous strain. The optimum fed-batch culture done by feeding glucose at a rate of 0.3 g h^–1 produced a maximum hirudin concentration of 62.1 mg l^–1, which corresponded to a 4.5-fold increase when compared with a simple batch culture done with the same strain.     

Increase of lycopene production by supplementing auxiliary carbon sources in metabolically engineered <Emphasis Type="Italic">Escherichia coli</Emphasis>

In the fed-batch culture of glycerol using a metabolically engineered strain of Escherichia coli, supplementation with glucose as an auxiliary carbon source increased lycopene production due to a significant increase in cell mass, despite a reduction in specific lycopene content. l-Arabinose supplementation increased lycopene production due to increases in cell mass and specific lycopene content. Supplementation with both glucose and l-arabinose increased lycopene production significantly due to the synergistic effect of the two sugars. Cell growth by the consumption of carbon sources was related to endogenous metabolism in the host E. coli. Supplementation with l-arabinose stimulated only the mevalonate pathway for lycopene biosynthesis and supplementation with both glucose and l-arabinose stimulated synergistically only the mevalonate pathway. In the fed-batch culture of glycerol with 10 g l⁻¹ glucose and 7.5 g l⁻¹ l-arabinose, the cell mass, lycopene concentration, specific lycopene content, and lycopene productivity after 34 h were 42 g l⁻¹, 1,350 mg l⁻¹, 32 mg g cells⁻¹, and 40 mg l⁻¹ h⁻¹, respectively. These values were 3.9-, 7.1-, 1.9-, and 11.7-fold higher than those without the auxiliary carbon sources, respectively. This is the highest reported concentration and productivity of lycopene.     

Induction of xylanases by sugar cane bagasse at different cell densities of Cellulomonas flavigena

The effect of cell density on xylanolytic activity and productivity of Cellulomonas flavigena was evaluated under two different culturing conditions: fed-batch culture with discontinuous feed of sugar cane bagasse (SCB; condition 1) and glycerol fed-batch culture followed by addition of SBC as xylanases inducer (condition 2). The enzymatic profile of xylanases was similar in both systems, regardless of the initial cell density at time of induction. However, the xylanolytic activity changed with initial cell density at the time of induction (condition 2). The maximum volumetric xylanase activity increased with increased initial cell density from 4 to 34 g l⁻¹ but decreased above this value. The largest total volumetric xylanase productivity under condition 2 (1.3 IU ml⁻¹ h⁻¹) was significantly greater compared to condition 1 (maximum 0.6 IU ml⁻¹ h⁻¹). Consequently, induction of xylanase activity by SCB after growing of C. flavigena on glycerol at intermediate cell density can be a feasible alternative to improve activity and productivity of xylanolytic enzymes.     

Microbial production of 1,3-propanediol from glycerol by Klebsiella pneumoniae under micro-aerobic conditions up to a pilot scale

1,3-Propanediol (1,3-PD) can be produced from glycerol by Klebsiella pneumoniae under micro-aerobic conditions. Recently, this fed-batch fermentation process has been successfully scaled up to 1 m³. The final 1,3-PD concentration, molar yield and volumetric productivity of 72 g l⁻¹, 57% and 2.1 g l⁻¹ h⁻¹, respectively, are close to those of 75 g l⁻¹, 61%, and 2.2 g l⁻¹ h⁻¹ under anaerobic conditions. This process would be suitable for the production of 1,3-PD on a large scale.     

Enhanced l-lysine production in threonine-limited continuous culture of Corynebacterium glutamicum by using gluconate as a secondary carbon source with glucose

In order to improve the production rate of l-lysine, a mutant of Corynebacterium glutamicum ATCC 21513 was cultivated in complex medium with gluconate and glucose as mixed carbon sources. In a batch culture, this strain was found to consume gluconate and glucose simultaneously. In continuous culture at dilution rates ranging from 0.2 h⁻¹ to 0.25 h⁻¹, the specific l-lysine production rate increased to 0.12 g g⁻¹ h⁻¹ from 0.1 g g⁻¹ h⁻¹, the rate obtained with glucose as the sole carbon source [Lee et al. (1995) Appl Microbiol Biotechnol 43:1019–1027]. It is notable that l-lysine production was observed at higher dilution rates than 0.4 h⁻¹, which was not observed when glucose was the sole carbon source. The positive effect of gluconate was confirmed in the shift of the carbon source from glucose to gluconate. The metabolic transition, which has been characterized by decreased l-lysine production at the higher glucose uptake rates, was not observed when gluconate was added. These results demonstrate that the utilization of gluconate as a secondary carbon source improves the maximum l-lysine production rate in the threonine-limited continuous culture, probably by relieving the limiting factors in the lysine synthesis rate such as NADPH supply and/or phosphoenolpyruvate availability. Received: 16 May 1997 / Received revision: 28 August 1997 / Accepted: 29 August 1997     

Production of 1,3-propanediol by Clostridium butyricum in continuous culture with cell recycling

The continuous fermentation of 1,3-propanediol from glycerol by Clostridium butyricum was subjected to cell recycling by filtration using hollow-fibre modules made from polysulphone. The performance of the culture system was checked at a retention ratio (dilution rate/bleed rate) of 5, dilution rates between 0.2 h⁻¹ and 1.0 h⁻¹ and glycerol input concentrations of 32 g l⁻¹ and 56 g l⁻¹. The near-to-optimum propanediol concentration of 26.5 g l⁻¹ (for 56 g l⁻¹ glycerol) was maintained up to a dilution rate of 0.5 h⁻¹ and then decreased while the propanediol productivity was highest at 0.7 h⁻¹. The productivity could be increased by a factor of four in comparison to the continuous culture without cell recycling. By application of the model of Zeng and Deckwer [(1995) Biotechnol Prog 11: 71–79] for cultures under substrate excess, it was shown that the limitations resulted exclusively from product inhibition and detrimental influences from the cell recycling system, such as shear stress, were not involved. Received: 20 October 1997 / Received revision: 12 December 1997 / Accepted: 14 December 1997     

Lactic acid production from cellulosic waste by immobilized cells of Lactobacillus delbrueckii

Industrial waste corn cob residue (from xylose manufacturing) without pretreatment was hydrolyzed by cellulase and cellobiase. The cellulosic hydrolysate contained 52.4 g l⁻¹ of glucose and was used as carbon source for lactic acid fermentation by cells of Lactobacillus delbrueckii ZU-S2 immobilized in calcium alginate gel beads. The final concentration of lactic acid and the yield of lactic acid from glucose were 48.7 g l⁻¹ and 95.2%, respectively, which were comparative to the results of pure glucose fermentation. The immobilized cells were quite stable and reusable, and the average yield of lactic acid from glucose in the hydrolysate was 95.0% in 12 repeated batches of fermentation. The suitable dilution rate of continuous fermentation process was 0.13 h⁻¹, and the yield of lactic acid from glucose and the productivity were 92.4% and 5.746 g l⁻¹ h⁻¹, respectively. The production of lactic acid by simultaneous saccharification and fermentation (SSF) process was carried out in a coupling bioreactor, the final concentration of lactic acid was 55.6 g l⁻¹, the conversion efficiency of lactic acid from cellulose was 91.3% and the productivity was 0.927 g l⁻¹ h⁻¹. By using fed-batch technique in the SSF process, the final concentration of lactic acid and the productivity increased to 107.6 g l⁻¹ and 1.345 g l⁻¹ h⁻¹, respectively, while the dosage of cellulase per gram substrate decreased greatly. This research work should advance the bioconversion of renewable cellulosic resources and reduce environmental pollution.