Identification of components of a new stability system of plasmid R1, ParD, that is close to the origin of replication of this plasmid

Summary We provide evidence that a mutation which derepresses an autoregulated system that is located in the vicinity of the basic replicon of R1, stabilizes the ParA^- and ParB^- miniplasmid of R1 pKN1562, without increasing its copy number. The system, which we have called ParD, maps inside the 1.45-kb PstI-EcoRI fragment that is adjacent to the origin of replication of the plasmid. Two protiens whose expression is coordinated are components of the system. The sequence of the PstI-EcoRI fragment was obtained. The wild-type ParD system determines in cis a basal but detectable stability.     

Functional analysis of the pBC1 replicon from <Emphasis Type="Italic">Bifidobacterium catenulatum</Emphasis> L48

To determine the minimal replicon of pBC1 (a 2.5-kb cryptic plasmid of Bifidobacterium catenulatum L48) and to check the functionality of its identified open reading frames (ORFs) and surrounding sequences, different segments of pBC1 were amplified by polymerase chain reaction (PCR) and cloned into pBif, a replication probe vector for bifidobacteria. The largest fragment tested in this manner encompassed most of the pBC1 sequence, while the shortest just included the repB gene and its immediate upstream sequences. Derivatives were all shown to allow replication in bifidobacteria. Surprisingly, both the transformation frequency and segregational stability in the absence of antibiotic selection decreased with reducing plasmid length. The relative copy number of the constructs (ranging from around 3 to 23 copies per chromosome equivalent, as compared to 30 copies for the original pBC1) was shown to be strain dependent and to decrease with reducing plasmid length. These results suggest that, although not essential, the copG-like and orfX-like genes of pBC1 play important roles in pBC1 replication. Interruption of repB produced a construct incapable of replicating in bifidobacteria. The analysis of pBC1 will allow its use in the construction of general and specific cloning vectors.     

Comparative Biology of Two Natural Variants of the IncQ-2 Family Plasmids,pRAS3.1 and pRAS3.2

Plasmids pRAS3.1 and pRAS3.2 are two closely related, natural variants of the IncQ-2 plasmid family that have identical plasmid backbones except for two differences. Plasmid pRAS3.1 has five 6-bp repeat sequences in the promoter region of the mobB gene and four 22-bp iterons in its oriV region, whereas pRAS3.2 has only four 6-bp repeats and three 22-bp iterons. Plasmid pRAS3.1 was found to have a higher copy number than pRAS3.2, and we show that the extra 6-bp repeat results in an increase in mobB and downstream mobA/repB expression. Placement of repB (primase) behind an arabinose-inducible promoter in trans resulted in an increase in repB expression and an approximately twofold increase in the copy number of plasmids with identical numbers of 22-bp iterons. The pRAS3 plasmids were shown to have a previously unrecognized toxin-antitoxin plasmid stability module within their replicons. The ability of the pRAS3 plasmids to mobilize the oriT regions of two other plasmids of the IncQ-2 family, pTF-FC2 and pTC-F14, suggested that the mobilization proteins pRAS3 are relaxed and can mobilize oriT regions with substantially different sequences. Plasmids pRAS3.1 and pRAS3.2 were highly incompatible with plasmids pTF-FC2 and pTC-F14, and this incompatibility was removed on inactivation of an open reading frame situated downstream of the mobCDE mobilization genes rather than being due to the 22-bp oriV-associated iterons. We propose that the pRAS3 plasmids represent a third, γ incompatibility group within the IncQ-2 family plasmids.Plasmids of the IncQ family are small (<20 kb), have a broad host range, and are highly promiscuous due to their ability to be mobilized very efficiently by self-transmissible plasmids such as the IncP plasmids. They have been divided into two families, IncQ-1 and IncQ-2, based on the amino acid sequence relatedness of their RepA (helicase), RepB (primase), and RepC (DNA-binding) replication proteins and because the mobilization proteins of the two families are unrelated, consisting of three or five genes, respectively (31). IncQ-1 group plasmids include RSF1010 and the near-identical R1162, pDN1, pIE1107, pIE1115, and pIE1130, while IncQ-2 plasmids include pTF-FC2, pTC-F14, and pRAS3.IncQ-2 plasmids pRAS3.1 and pRAS3.2 were isolated in Norway from the fish pathogens Aeromonas salmonicida subsp. salmonicida and atypical A. salmonicida, respectively, while investigating plasmids that conferred resistance to tetracycline (21). The two plasmids encode identical replication and mobilization proteins, with the most important differences in the plasmid backbone being that pRAS3.1 has four 22-bp iterons in its oriV region and five 6-bp repeat sequences upstream of its mobB gene, whereas pRAS3.2 has only three iterons and four 6-bp repeat sequences. No biological studies were carried out in the initial report of the pRAS3 plasmids. As a contribution to our studies on the evolution of IncQ plasmids, our longer-term aim is to address the question of why two natural versions of the plasmid exist. Here we report on the major differences in the biology of the two plasmids. In addition, we discovered the presence of repC and mobB genes that were not detected when the sequence of pRAS3 plasmids was previously reported. We also discovered a putative toxin-antitoxin (TA) postsegregational system different from that found in other members of the IncQ plasmids and tested it for functionality.The IncQ-1 plasmids are subdivided into incompatibility groups α, β, and γ, (31), whereas the IncQ-2 plasmids are subdivided into two incompatibility groups, α and β (14). In this work we also report on the incompatibility between the pRAS3 plasmids and other members of the IncQ-2 plasmid family as well as the IncQ-1 family plasmids. Furthermore, we compare the functional relatedness of the pRAS3 mobilization system with that of previously studied IncQ-2 plasmids.     

Characterization of the stable maintenance properties of the par region of broad-host-range plasmid RK2.

A 3.2-kb fragment encoding five genes, parCBA/DE, in two divergently transcribed operons promotes stable maintenance of the replicon of the broad-host-range plasmid RK2 in a vector-independent manner in Escherichia coli. The parDE operon has been shown to contribute to stabilization through the postsegregational killing of plasmid-free daughter cells, while the parCBA operon encodes a resolvase, ParA, that mediates the resolution of plasmid multimers through site-specific recombination. To date, evidence indicates that multimer resolution alone does not play a significant role in RK2 stable maintenance by the parCBA operon in E. coli. It has been proposed, instead, that the parCBA region encodes an additional stability mechanism, a partition system, that ensures that each daughter cell receives a plasmid copy at cell division. However, studies carried out to date have not directly determined the plasmid stabilization activity of the parCBA operon alone. An assessment was made of the relative contributions of postsegregational killing (parDE) and the putative partitioning system (parCBA) to the stabilization of mini-RK2 replicons in E. coli. Mini-RK2 replicons carrying either the entire 3.2-kb (parCBA/DE) fragment or the 2.3-kb parCBA region alone were found to be stably maintained in two E. coli strains tested. The stabilization found is not due to resolution of multimers. The stabilizing effectiveness of parCBA was substantially reduced when the plasmid copy number was lowered, as in the case of E. coli cells carrying a temperature-sensitive mini-RK2 replicon grown at a nonpermissive temperature. The presence of the entire 3.2-kb region effectively stabilized the replicon, however, under both low- and high-copy-number-conditions. In those instances of decreased plasmid copy number, the postsegregational killing activity, encoded by parDE, either as part of the 3.2-kb fragment or alone played the major role in the stabilization of mini-RK2 replicons within the growing bacterial population. Our findings indicate that the parCBA operon functions to stabilize by a mechanism other than cell killing and resolution of plasmid multimers, while the parDE operon functions solely to stabilize plasmids by cell killing. The relative contribution of each system to stabilization depends on plasmid copy number and the particular E. coli host.     

The integrated state of the rolling-circle plasmid pTB913 in the composite Bacillus plasmid pTB19.

Summary pTB19, a 27 kb plasmid originating from a thermophilic Bacillus species, contains integrated copies of two rolling-circle type plasmids on a 10.6 kb DNA fragment. In the present study we analysed the part of pTB19 that contains the rolling-circle plasmid pTB913 and the region in between the two rolling-circle plasmids. We show that, in the integrated state, pTB913 was flanked by a 55 by direct repeat that duplicated part of the replication initiation gene repB. Since repB was interrupted, the integrated pTB913 could not initiate rolling-circle replication. Autonomously replicating pTB913 was produced from pTB19, probably through recombination between the 55 by direct repeats; this was a rare event. Since the second integrated rolling-circle type plasmid also contained a non-functional replication initiation gene, replication of pT1319 must be controlled by the RepA determinant. Theta-type replication, controlled by RepA is likely to account for the high stability of pTB19. In between the two integrated rolling-circle plasmids was present an open reading frame (447 codons) which could encode a protein of unknown function.     

Genetic analysis of a lactococcal plasmid replicon

Summary The sequence and genetic organization was determined of the 2508 by lactococcal portion of pFX2, which was derived from a crypticLactococcus lactis subsp.lactis plasmid and used as the basis for construction of a series of lactococcal vectors. A lactococcal plasmid plus origin and two replication protein-coding regions (repA andrepB) were located. RepA has a helix-turn-helix motif, a geometry typical of DNA-binding proteins. RepB shows a high degree of homology to the plasmid replication initiation proteins from other gram-positive bacteria andMycoplasma. The transcribed inverted repeat sequence betweenrepA andrepB could form an attenuator to regulate pFX2 replication. Upstream of theori site, and in a region which was non-essential for replication, a 215 by sequence identical to the staphylococcal plasmid pE194 and carrying the RS_A site was identified. The genetic organization of this lactococcal plasmid replicon shares significant similarity with pE194 group plasmids.     

Transformation ofLactobacillus reuteri with electroporation: Studies on the erythromycin resistance plasmid pLUL631

A high-frequency transformation system was developed forLactobacillus reuteri with the electroporation technique. With this method, transformation frequencies of 10⁷ transformants per g DNA were routinely obtained with the plasmid pLUL631 and its derivatives. pLUL631, a nativeL. reuteri plasmid containing an erythromycin resistance determinant, was studied mainly with regard to replicon size and stability. The minimal replicon of the plasmid was shown to be located on a 2.4–3.1 kilobase pair fragment. pLUL631 was stably maintained in severalL. reuteri strains, but a deletion derivative, pLUL634, was unstable during growth under nonselective conditions. A hybrid plasmid, pLUL200, derived from the broad-host-range plasmid pVS1 and a part of the pLUL631 replicon, was shown to have higher copy number than both pLUL631 and pLUL634. The replicon of pLUL631 is suggested to be a suitable part of a food grade vector forL. reuteri.     

The Streptomyces ghanaensis low copy plasmid pSG2 and its use for vector construction

A plasmid, pSG2, was isolated from Streptomyces ghanaensis and characterized by electron microscopy, buoyant density measurement, and restriction enzyme analysis. The length of 13.8 kb, single restriction sites for HindIII, EcoRV and PvuII and the possibility of deleting non-essential regions of the plasmid made pSG2 a suitable basic replicon for vector development. pSG2 has a copy number of about four. Plasmid pSG2 was fused to a pACYC184 derivative modified to harbour a thiostrepton resistance gene. The resulting plasmid, designated pSW1, is a 16.6 kb shuttle plasmid which replicates in Escherichia coli and in several Streptomyces strains, including S. ghanaensis, S. lividans and S. viridochromogenes. Replacement of a Bg/II-fragment of plasmid pSG2 by a fragment encoding thiostrepton resistance resulted in a low copy 12.2 kb Streptomyces plasmid. This plasmid, designated pSW2, is a Streptomyces broad host range plasmid.     

Partitioning of the F plasmid: Overproduction of an essential protein for partition inhibits plasmid maintenance

Summary Multicopy plasmids carrying the sopB gene of the F plasmid inhibit stable inheritance of a coexisting mini-F plasmid. This incompatibility, termed IncG, is found to be caused by excess amounts of the SopB protein, which is essential for accuratepartitioning of plasmid DNA molecules into daughter cells. A sopB-carrying multicopy plasmid that shows the IncG⁺ phenotype was mutagenized in vitro and IncG negative mutant plasmids were isolated. Among these amber and missense mutants of sopB, mutants with a low plasmid copy number and a mutant in the Shine-Dalgarno sequence for translation of the SopB protein were obtained. These results demonstrate that the IncG phenotype is caused by the SopB protein, and that the incompatibility is expressed only when the protein is overproduced. This suggests that the protein must be kept at appropriate concentrations to ensure stable maintenance of the plasmid.     

Maintenance of the virulence plasmid in Shigella flexneri is influenced by Lon and two functional partitioning systems

Members of the genus Shigella carry a large plasmid, pINV, which is essential for virulence. In Shigella flexneri, pINV harbours three toxin‐antitoxin (TA) systems, CcdAB, GmvAT and VapBC that promote vertical transmission of the plasmid. Type II TA systems, such as those on pINV, consist of a toxic protein and protein antitoxin. Selective degradation of the antitoxin by proteases leads to the unopposed action of the toxin once genes encoding a TA system have been lost, such as following failure to inherit a plasmid harbouring a TA system. Here, we investigate the role of proteases in the function of the pINV TA systems and demonstrate that Lon, but not ClpP, is required for their activity during plasmid stability. This provides the first evidence that acetyltransferase family TA systems, such as GmvAT, can be regulated by Lon. Interestingly, S. flexneri pINV also harbours two putative partitioning systems, ParAB and StbAB. We show that both systems are functional for plasmid maintenance although their activity is masked by other systems on pINV. Using a model vector based on the pINV replicon, we observe temperature‐dependent differences between the two partitioning systems that contribute to our understanding of the maintenance of virulence in Shigella species.     

Functional analysis of the plasmid pM4 replicon from Lactobacillus plantarum M4: Determination of the minimal replicon and functionality identification of the putative sso

In order to determine the minimal replicon and the single strand origin (sso) of the plasmid pM4, different fragments of pM4 were amplified by polymerase chain reaction (PCR) and cloned into pBEm, a replication probe vector for Lactobacillus. The deletion analysis results showed that the minimal replicon of pM4 could be determined within a 1280 bp fragment consisting of double strand origin (dso) and rep gene encoding replication protein. Based on plasmid segregation stability assay and its ability to convert single-stranded DNA (ssDNA) to double-stranded DNA (dsDNA) by Southern hybridization, an sso of replication was located at nucleotides −118–92 in the plasmid pM4, about 300 bp upstream of dso. In addition, the host range assay indicated that plasmid pM4 could replicate in L. casei 05–21, L. rhamnosus AS 1.2466^T and L. plantarum 05–19 of all the tested Lactobacillus strains. Analysis of the pM4 replicon will allow its use in constructing a food-grade vector for application in food industry.     

An unusual mutation in RepA increases the copy number of a stringently controlled plasmid (Rtsl derivative) by over one hundred fold

A copy number mutant of the Rtsl replicon (copy number 1–2 copies/cell) was obtained. A one-base substitution in the repA region results in a single amino acid change from histidine to asparagine at position 159. This mutation increased the plasmid copy number by up to 120-fold depending upon the growth conditions. At 42.5° C the plasmid with the wild type replicon was unstable while the mutated replicon was relatively stable.     

Gene cloning,expression and characterization of a new cold-active and salt-tolerant endo-β-1,4-xylanase from marine <Emphasis Type="Italic">Glaciecola mesophila</Emphasis> KMM 241

A new plasmid pCASE1 was isolated from Gram-positive Corynebacterium casei JCM 12072. It comprised a 2.4-kb nucleotide sequence with three ORFs, two of which were indispensable for autonomous replication in Corynebacterium glutamicum. Homology search identified these two ORFs as repA and repB, areas coding proteins involved in plasmid replication. repA sequence showed high similarity to theta-replicating Escherichia coli ColE2-P9 plasmids and even higher similarity to plasmids derived from Gram-positive bacteria belonging to a subfamily of this ColE2-P9 group. An E. coli–C. glutamicum shuttle vector was constructed with pCASE1 fragment including repA and repB to transform C. glutamicum and showed compatibility with corynebacterial plasmids from different plasmid families. The copy number of the shuttle vector in C. glutamicum was 13 and the vector showed stability for 102 generations with no selective pressure.     

Genetic map of the virulence plasmid of Salmonella enteritidis and nucleotide sequence of its replicons

Partial sequencing of a genomic library of the virulence plasmid of Salmonella enteritidis has been used to localize in the restriction map of this plasmid the genetic loci already described in other Salmonella plasmids. The comparison of the vestigial tra region with the corresponding genes in the F plasmid allowed us to define the extent of the deletions that the S. enteritidis plasmid should have suffered. The putative replicons of the plasmid, repB and repC, were isolated and both proved to be functional in Escherichia coli, but repC was segregationally unstable. The nucleotide sequence of repB showed the typical organization of RepFIIA replicons, although the similarity was lower than usual in this group of replicons. The highest homology was found with the replicon of the virulence plasmid pYVe439-80 from Yersinia enterocolitica (72.5%). Replicon repC also showed a maximum identity of 72.6% with known replicons, namely the RepFIB of pColV-K30 and P307, both virulence plasmids isolated from E. coli. We conclude that the S. enteritidis plasmid could arise from the S. typhimurium plasmid through deletions, and that they are evolutionary distant from other IncFI and IncFII plasmids.     

Plasmid-Encoded Anthranilate Synthase (TrpEG) in Buchnera aphidicola from Aphids of the Family Pemphigidae

Buchnera aphidicola is an obligate intracellular symbiont of aphids. One of its proposed functions is the synthesis of essential amino acids, nutrients required by aphids but deficient in their diet of plant phloem sap. The genetic organization of the tryptophan pathway in Buchnera from proliferous aphids of the family Aphididae has previously been shown to reflect a capacity to overproduce this essential amino acid (C.-Y. Lai, L. Baumann, and P. Baumann, Proc. Natl. Acad. Sci. USA 91:3819–3823, 1994). This involved amplification of the genes for the first enzyme in the pathway, anthranilate synthase (TrpEG), on a low-copy-number plasmid. Here we report on the finding and molecular characterization of TrpEG-encoding plasmids in Buchnera from aphids of the distantly related family Pemphigidae. Buchnera from Tetraneura caerulescens contained a 3.0-kb plasmid (pBTc2) that carried a single copy of trpEG and resembled trpEG plasmids of Buchnera from the Aphididae. The second plasmid (pBPs2), isolated from Buchnera of Pemphigus spyrothecae, contained a different replicon. It consisted of a putative origin of replication containing iterons and an open reading frame, designated repAC, which showed a high similarity to the gene encoding the replication initiation protein RepA of the RepA/C replicon from the broad-host-range IncA/C group of plasmids. The plasmid population was heterogeneous with respect to the number of tandem repeats of a 1.8-kb unit carrying repAC₁, trpG, and remnants of trpE. The two principal forms consisted of either five or six copies of this repeat and a single-copy region carrying repAC₂, the putative origin of replication, and trpE. The unexpected finding of elements of the RepA/C replicon in previously characterized trpEG plasmids from Buchnera of the Aphididae suggests that a replacement of replicons has occurred during the evolution of these plasmids, which may point to a common ancestry for all Buchnera trpEG amplifications.     

Time-course determination of plasmid content in eukaryotic and prokaryotic cells using Real-Time PCR

A Real-Time PCR method was developed to monitor the plasmid copy number (PCN) in Escherichia coli and Chinese hamster ovary (CHO) cells. E. coli was transformed with plasmids containing a ColE1 or p15A origin of replication and CHO cells were transfected with a ColE1 derived plasmid used in DNA vaccination and carrying the green fluorescent protein (GFP) reporter gene. The procedure requires neither specific cell lysis nor DNA purification and can be performed in <30 min with dynamic ranges covering 0.9 pg–55 ng, and 5.0 pg–2.5 ng of plasmid DNA (pDNA) for E. coli and CHO cells, respectively. Analysis of PCN in E. coli batch cultures revealed that the maximum copy number per cell is attained in mid-exponential phase and that this number decreases on average 80% towards the end of cultivation for both types of plasmids. The plasmid content of CHO cells determined 24 h post-transfection was around 3 × 10⁴ copies per cell although only 37% of the cells expressed GFP one day after transfection. The half-life of pDNA was 20 h and around 100 copies/cell were still detected 6 days after transfection.     

The poison–antidote stability system of the broad-host-range Thiobacillus ferrooxidans plasmid pTF-FC2

In plasmid pTF-FC2, three small open reading frames (ORFs) are situated between the repB (primase) gene and the repA (helicase) gene of its IncQ-type replicon. Disruption of each of the three ORFs followed by tests for plasmid stability and host cell growth indicated that the ORFs encoded a poison–antidote plasmid stability system. The three genes were named pasA , pasB and pasC (plasmid addiction system), in which PasA is the antidote, PasB the toxin and PasC a protein that appears to enhance the ability of the antidote to neutralize the toxin. Disruption of the pasA gene resulted in two different spontaneous deletions, which inactivated the stability system but did not alter the host range or plasmid copy number. This indicated that the three small ORFs were not involved in plasmid replication. When placed behind a tac promoter, induction of pasB was found to be highly lethal to host cells, which suggests that the Pas system acts by killing plasmid-free host cells rather than by retarding the growth of plasmid-free segregants, as occurs in the ParD system of R1. In spite of this, the presence of the Pas poison–antidote system resulted in a relatively modest threefold stabilization of the pTF-FC2 host replicon and a similar increase in the stabilization of an unstable heterologous R1 plasmid replicon. The Pas system is a poison–antidote plasmid stability module, which appears to have become integrated within the pTF-FC2 replicon module.