原子力显微镜单分子力谱研究生物分子间相互作用

原子力显微镜单分子力谱是近年来发展起来的能在单分子水平研究生物分子相互作用的新工具。本文综述了单分子力谱的测定原理、方法及其在研究蛋白．蛋白、蛋白-DNA相互作用,蛋白质去折叠和活细胞上配体／受体结合中的应用进展。     

Nonspecific interactions in AFM force spectroscopy measurements

Sample-probe contact duration (dwell time) and loading force are two important parameters for the atomic force microscopy (AFM) force spectroscopy measurements of ligand-receptor interaction. A prolonged contact time may be required to initiate ligand-receptor binding as a result of slow on-rate kinetics or low reactant density. In general, increasing contact duration promotes nonspecific interactions between the substrate and the functionalized cantilever and, thus, masking the detection of the specific interactions. To reduce the nonspecific interactions in AFM force measurements requiring extended substrate-probe contact, we investigated the interaction of bovine serum albumin (BSA)-functionalized cantilever with BSA-coated glass, polyethylene glycol (PEG)-functionalized glass, Pluronic-treated Petri dishes and agarose beads. The frequency of nonspecific interaction between the BSA-functionalized cantilever and the different samples increased with loading force and dwell time. This increase in nonspecific adhesion can be attributed to the interaction mediated by forced unfolding of BSA. By reducing the loading force, the contact duration of the AFM probe with an agarose bead can be extended to a few minutes without nonspecific adhesion.     

Two-dimensional kinetics of inter-connexin interactions from single-molecule force spectroscopy

Gap junction channels are intercellular channels that form by docking the extracellular loops of connexin protein subunits. While the structure and function of gap junctions as intercellular channels have been characterized using different techniques, the physics of the inter-connexin interaction remain unknown. Moreover, as far as we know, the capacity of gap junction channels to work as adhesion complexes supporting pulling forces has not yet been quantitatively addressed. We report the first quantitative characterization of the kinetics and binding strength of the interaction of a short peptide mimicking extracellular loop 2 of Cx26 with membrane-reconstituted Cx26, combining the imaging and force spectroscopy capabilities of atomic force microscopy. The fast dissociation rate inferred a dynamic bond, while the slow association rate reflected the reduced flexibility and small size of extracellular loops. Our results propose the gap junction channel as an adhesion complex that associates slowly and dissociates fast at low force but is able to support important pulling forces in its native, hexameric form.     

Atomic force microscope-based single-molecule force spectroscopy of RNA unfolding

Single-molecule force spectroscopy (SMFS) using the atomic force microscope (AFM) has emerged as an important tool for probing biomolecular interaction and exploring the forces, dynamics, and energy landscapes that underlie function and specificity of molecular interaction. These studies require attaching biomolecules on solid supports and AFM tips to measure unbinding forces between individual binding partners. Herein we describe efficient and robust protocols for probing RNA interaction by AFM and show their value on two well-known RNA regulators, the Rev-responsive element (RRE) from the HIV-1 genome and an adenine-sensing riboswitch. The results show the great potential of AFM–SMFS in the investigation of RNA molecular interactions, which will contribute to the development of bionanodevices sensing single RNA molecules.     

Detecting molecular interactions that stabilize native bovine rhodopsin

Using single-molecule force spectroscopy we probed molecular interactions within native bovine rhodopsin and discovered structural segments of well-defined mechanical stability. Highly conserved residues among G protein-coupled receptors were located at the interior of individual structural segments, suggesting a dual role for these segments in rhodopsin. Firstly, structural segments stabilize secondary structure elements of the native protein, and secondly, they position and hold the highly conserved residues at functionally important environments. Two main classes of force curves were observed. One class corresponded to the unfolding of rhodopsin with the highly conserved Cys110-Cys187 disulfide bond remaining intact and the other class corresponded to the unfolding of the entire rhodopsin polypeptide chain. In the absence of the Cys110-Cys187 bond, the nature of certain molecular interactions within folded rhodopsin was altered. These changes highlight the structural importance of this disulfide bond and may form the basis of dysfunctions associated with its absence.     

A comparative molecular force spectroscopy study of homophilic JAM-A interactions and JAM-A interactions with reovirus attachment protein sigma1

JAM-A belongs to a family of immunoglobulin-like proteins called junctional adhesion molecules (JAMs) that localize at epithelial and endothelial intercellular tight junctions. JAM-A is also expressed on dendritic cells, neutrophils, and platelets. Homophilic JAM-A interactions play an important role in regulating paracellular permeability and leukocyte transmigration across epithelial monolayers and endothelial cell junctions, respectively. In addition, JAM-A is a receptor for the reovirus attachment protein, sigma1. In this study, we used single molecular force spectroscopy to compare the kinetics of JAM-A interactions with itself and sigma1. A chimeric murine JAM-A/Fc fusion protein and the purified sigma1 head domain were used to probe murine L929 cells, which express JAM-A and are susceptible to reovirus infection. The bond half-life (t(1/2)) of homophilic JAM-A interactions was found to be shorter (k(off)(o) = 0.688 +/- 0.349 s(-1)) than that of sigma1/JAM-A interactions (k(off)(o) = 0.067 +/- 0.041 s(-1)). These results are in accordance with the physiological functions of JAM-A and sigma1. A short bond lifetime imparts a highly dynamic nature to homophilic JAM-A interactions for regulating tight junction permeability while stable interactions between sigma1 and JAM-A likely anchor the virus to the cell surface and facilitate viral entry.     

High-speed atomic force microscopy: Imaging and force spectroscopy

Atomic force microscopy (AFM) is the type of scanning probe microscopy that is probably best adapted for imaging biological samples in physiological conditions with submolecular lateral and vertical resolution. In addition, AFM is a method of choice to study the mechanical unfolding of proteins or for cellular force spectroscopy. In spite of 28 years of successful use in biological sciences, AFM is far from enjoying the same popularity as electron and fluorescence microscopy. The advent of high-speed atomic force microscopy (HS-AFM), about 10 years ago, has provided unprecedented insights into the dynamics of membrane proteins and molecular machines from the single-molecule to the cellular level. HS-AFM imaging at nanometer-resolution and sub-second frame rate may open novel research fields depicting dynamic events at the single bio-molecule level. As such, HS-AFM is complementary to other structural and cellular biology techniques, and hopefully will gain acceptance from researchers from various fields. In this review we describe some of the most recent reports of dynamic bio-molecular imaging by HS-AFM, as well as the advent of high-speed force spectroscopy (HS-FS) for single protein unfolding.     

Investigating the binding behaviour of two avidin‐based testosterone binders using molecular recognition force spectroscopy

Molecular recognition force spectroscopy, a biosensing atomic force microscopy technique allows to characterise the dissociation of ligand–receptor complexes at the molecular level. Here, we used molecular recognition force spectroscopy to study the binding capability of recently developed testosterone binders. The two avidin‐based proteins called sbAvd‐1 and sbAvd‐2 are expected to bind both testosterone and biotin but differ in their binding behaviour towards these ligands. To explore the ligand binding and dissociation energy landscape of these proteins, we tethered biotin or testosterone to the atomic force microscopy probe while the testosterone‐binding protein was immobilized on the surface. Repeated formation and rupture of the ligand–receptor complex at different pulling velocities allowed determination of the loading rate dependence of the complex‐rupturing force. In this way, we obtained the molecular dissociation rate (k_off) and energy landscape distances (x_β) of the four possible complexes: sbAvd‐1‐biotin, sbAvd‐1‐testosterone, sbAvd‐2‐biotin and sbAvd‐2‐testosterone. It was found that the kinetic off‐rates for both proteins and both ligands are similar. In contrast, the x_β values, as well as the probability of complex formations, varied considerably. In addition, competitive binding experiments with biotin and testosterone in solution differ significantly for the two testosterone‐binding proteins, implying a decreased cross‐reactivity of sbAvd‐2. Unravelling the binding behaviour of the investigated testosterone‐binding proteins is expected to improve their usability for possible sensing applications. Copyright © 2014 John Wiley & Sons, Ltd.     

Study of interaction between Smad7 and DNA by single-molecule force spectroscopy

Smad7 is an antagonist of TGF-β signaling pathway and the mechanism of its inhibitory effect is of great interest. We recently found that Smad7 could function in the nucleus by binding to the DNA elements containing the minimal Smad binding element CAGA box. In this work, we further applied single-molecule force spectroscopy to study the DNA-binding property of Smad7. Smad7 showed similar binding strength to the oligonucleotides corresponding to the CAGA-containing activin responsive element (ARE) and the PAI-1 promoter, as that of Smad4. However, Smad7 also exhibited a binding activity to the mutant ARE with the CAGA sequence substituted, indicating its DNA-binding specificity is different from other Smads. Moreover, we demonstrated that the MH2 domain of Smad7 had a higher binding affinity to the DNA elements than the full-length Smad7, while the N-terminal domain exhibited an inhibitory effect.     

Single-molecule approaches to prion protein misfolding

The structural conversion of the prion protein PrP into a transmissible, misfolded form is the central element of prion disease, yet there is little consensus as to how it occurs. Key aspects of conversion into the diseased state remain unsettled, from details about the earliest stages of misfolding such as the involvement of partially- or fully-unfolded intermediates to the structure of the infectious state. Part of the difficulty in understanding the structural conversion arises from the complexity of the underlying energy landscapes. Single molecule methods provide a powerful tool for probing complex folding pathways as in prion misfolding, because they allow rare and transient events to be observed directly. We discuss recent work applying single-molecule probes to study misfolding in prion proteins, and what it has revealed about the folding dynamics of PrP that may underlie its unique behavior. We also discuss single-molecule studies probing the interactions that stabilize non-native structures within aggregates, pointing the way to future work that may help identify the microscopic events triggering pathogenic conversion. Although single-molecule approaches to misfolding are relatively young, they have a promising future in prion science.     

Protein interactions and misfolding analyzed by AFM force spectroscopy

Protein misfolding is conformational transition dramatically facilitating the assembly of protein molecules into aggregates of various morphologies. Spontaneous formation of specific aggregates, mostly amyloid fibrils, was initially believed to be limited to proteins involved in the development of amyloidoses. However, recent studies show that, depending on conditions, the majority of proteins undergo structural transitions leading to the appearance of amyloidogenic intermediates followed by aggregate formation. Various techniques have been used to characterize the protein misfolding facilitating the aggregation process, but no direct evidence as to how such a conformational transition increases the intermolecular interactions has been obtained as of yet. We have applied atomic force microscopy (AFM) to follow the interaction between protein molecules as a function of pH. These studies were performed for three unrelated and structurally distinctive proteins, alpha-synuclein, amyloid beta-peptide (Abeta) and lysozyme. It was shown that the attractive force between homologous protein molecules is minimal at physiological pH and increases dramatically at acidic pH. Moreover, the dependence of the pulling forces is sharp, suggesting a pH-dependent conformational transition within the protein. Parallel circular dichroism (CD) measurements performed for alpha-synuclein and Abeta revealed that the decrease in pH is accompanied by a sharp conformational transition from a random coil at neutral pH to the more ordered, predominantly beta-sheet, structure at low pH. Importantly, the pH ranges for these conformational transitions coincide with those of pulling forces changes detected by AFM. In addition, protein self-assembly into filamentous aggregates studied by AFM imaging was shown to be facilitated at pH values corresponding to the maximum of pulling forces. Overall, these results indicate that proteins at acidic pH undergo structural transition into conformations responsible for the dramatic increase in interprotein interaction and promoting the formation of protein aggregates.     

Probing Interactions within the synaptic DNA-SfiI complex by AFM force spectroscopy

SfiI belongs to a family of restriction enzymes that function as tetramers, binding two recognition regions for the DNA cleavage reaction. The SfiI protein is an attractive and convenient model for studying synaptic complexes between DNA and proteins capable of site-specific binding. The enzymatic action of SfiI has been very well characterized. However, the properties of the complex before the cleavage reaction are not clear. We used single-molecule force spectroscopy to analyze the strength of interactions within the SfiI-DNA complex. In these experiments, the stability of the synaptic complex formed by the enzyme and two DNA duplexes was probed in a series of approach-retraction cycles. In order to do this, one duplex was tethered to the surface and the other was tethered to the probe. The complex was formed by the protein present in the solution. An alternative setup, in which the protein was anchored to the surface, allowed us to probe the stability of the complex formed with only one duplex in the approach-retraction experiments, with the duplex immobilized at the probe tip. Both types of complexes are characterized by similar rupture forces. The stability of the complex was determined by measuring the dependence of rupture forces on force loading rates (dynamic force spectroscopy) and the results suggest that the dissociation reaction of the SfiI-DNA complex has a single energy barrier along the dissociation path. Dynamic force spectroscopy was instrumental in revealing the role of the 5 bp spacer region within the palindromic recognition site on DNA-SfiI in the stability of the complex. The data show that, although the change of non-specific sequence does not alter the position of the activation barrier, it changes values of the off rates significantly.     

Piezoelectric tuning fork probe for atomic force microscopy imaging and specific recognition force spectroscopy of an enzyme and its ligand

Piezoelectric quartz tuning fork has drawn the attention of many researchers for the development of new atomic force microscopy (AFM) self‐sensing probes. However, only few works have been done for soft biological materials imaging in air or aqueous conditions. The aim of this work was to demonstrate the efficiency of the AFM tuning fork probe to perform high‐resolution imaging of proteins and to study the specific interaction between a ligand and its receptor in aqueous media. Thus, a new kind of self‐sensing AFM sensor was introduced to realize imaging and biochemical specific recognition spectroscopy of glucose oxidase enzyme using a new chemical functionalization procedure of the metallic tips based on the electrochemical reduction of diazonium salt. This scanning probe as well as the functionalization strategy proved to be efficient respectively for the topography and force spectroscopy of soft biological materials in buffer conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Kinetics of adhesion mediated by extracellular loops of claudin-2 as revealed by single-molecule force spectroscopy

Claudins (Cldns) comprise a large family of important transmembrane proteins that localize at tight junctions where they play a central role in regulating paracellular transportation of solutes across epithelia. However, molecular interactions occurring between the extracellular domains of these proteins are poorly understood. Here, using atomic force microscopy, the adhesion strength and kinetic properties of the homophilic interactions between the two extracellular loops of Cldn2 (C2E1or C2E2) and full-length Cldn2 were characterized at the level of single molecule. Results show that while the first extracellular loop is sufficient for Cldn2/Cldn2 trans-interaction, the second extracellular loop does not interact with the full-length Cldn2, with the first extracellular loop, or with itself. Furthermore, within the range of loading rates probed (10²-10⁴ pN/s), dissociation of Cldn2/Cldn2 and C2E1/C2E1 complexes follows a two-step energy barrier model. The difference in activation energy for the inner and outer barriers of Cldn2/Cldn2 and C2E1/C2E1 dissociation was found to be 0.26 and 1.66 k_BT, respectively. Comparison of adhesion kinetics further revealed that Cldn2/Cldn2 dissociates at a much faster rate than C2E1/C2E1, indicating that the second extracellular loop probably has an antagonistic effect on the kinetic stability of Cldn2-mediated interactions. These results provide an insight into the importance of the first extracellular loop in trans-interaction of Cldn2-mediated adhesion.     

Hydrodynamic effects in fast AFM single-molecule force measurements

Atomic force microscopy (AFM) allows the critical forces that unfold single proteins and rupture individual receptor–ligand bonds to be measured. To derive the shape of the energy landscape, the dynamic strength of the system is probed at different force loading rates. This is usually achieved by varying the pulling speed between a few nm/s and a few m/s, although for a more complete investigation of the kinetic properties higher speeds are desirable. Above 10 m/s, the hydrodynamic drag force acting on the AFM cantilever reaches the same order of magnitude as the molecular forces. This has limited the maximum pulling speed in AFM single-molecule force spectroscopy experiments. Here, we present an approach for considering these hydrodynamic effects, thereby allowing a correct evaluation of AFM force measurements recorded over an extended range of pulling speeds (and thus loading rates). To support and illustrate our theoretical considerations, we experimentally evaluated the mechanical unfolding of a multi-domain protein recorded at 30 m/s pulling speed.Abbrevations AFM atomic force micrcoscopy - pN piconewton - BR bacteriorhodopsin - DFS dynamic force spectroscopy - Ig27 immunoglobulin 27 - If27-8 immunoglobulin 27 octameric construct - BFP biomembrane force probe     

Atomic force microscopy-based molecular studies on the recognition of immunogenic chlorinated ovalbumin by macrophage receptors

This report presents simple and reliable approach developed to study the specific recognition events between chlorinated ovalbumin (OVA) and macrophages using atomic force microscopy (AFM). Thanks to the elimination of nonspecific adhesion, the interactions of the native and chlorinated OVA with a membrane of macrophages could be quantified using exclusively the so-called adhesion frequency (AF). The proposed system not only enabled the application of AFM-based force measurements for such poorly defined ligand-receptor pairs but also significantly improved both the acquisition and the processing of the data. The proteins were immobilized on the gold-coated AFM tips from the aqueous solutions containing charged thiol adsorbates. Such surface dilution of the proteins ensured the presence of single or just a few macromolecules at the tip-surface contact. The formation of negatively charged monolayer on the tip dramatically limited its nonspecific interactions with the macrophage surface. In such systems, AF was used as a measure of the recognition events even if the interaction forces varied significantly for sets of measurements. The system with the native OVA, a weak immunogen, showed only negligible AF compared with 85% measured for the immunogenic chlorinated OVA. The AF values varied with the tip-macrophage contact time and loading velocity. Blocking of the receptors by the chlorinated OVA was also confirmed. The developed approach can be also used to study other ligand-receptor interactions in poorly defined biological systems with intrinsically broad distribution of the rupture forces, thus opening new fields for AFM-based recognition on molecular level.     

Nanomechanical force measurements of gliadin protein interactions

The strength and nature of interactions between monomeric gliadin proteins involving alpha-alpha, omega-omega, and alpha-omega interactions in 0.01M acetic acid, and the effect of urea has been investigated. It was shown by means of nanomechanical force measurements that the stretching events in the separation curve after adhesive phenomena originated from proteins. These stretching events displayed different responses of the alpha- and omega-gliadins to urea. While 2M urea caused the more globular alpha-gliadins to unfold, the beta-turn-rich omega-gliadins remained fairly stable even in 8M urea. This suggests different roles for gliadins in the formation of dough; while the omega-gliadins are still in a compact structure being responsible for the viscous flow, the alpha-gliadins have already started to participate in forming the network in dough.     

Mechanical unfolding intermediates observed by single-molecule force spectroscopy in a fibronectin type III module

Domain 10 of type III fibronectin (10FNIII) is known to play a pivotal role in the mechanical interactions between cell surface integrins and the extracellular matrix. Recent molecular dynamics simulations have predicted that 10FNIII, when exposed to a stretching force, unfolds along two pathways, each with a distinct, mechanically stable intermediate. Here, we use single-molecule force spectroscopy combined with protein engineering to test these predictions by probing the mechanical unfolding pathway of 10FNIII. Stretching single polyproteins containing the 10FNIII module resulted in sawtooth patterns where 10FNIII was seen unfolding in two consecutive steps. The native state unfolded at 100(+/-20) pN, elongating (10)FNIII by 12(+/-2) nm and reaching a clearly marked intermediate that unfolded at 50(+/-20) pN. Unfolding of the intermediate completed the elongation of the molecule by extending another 19(+/-2) nm. Site-directed mutagenesis of residues in the A and B beta-strands (E9P and L19P) resulted in sawtooth patterns with all-or-none unfolding events that elongated the molecule by 19(+/-2) nm. In contrast, mutating residues in the G beta-strand gave results that were dependent on amino acid position. The mutation I88P in the middle of the G beta-strand resulted in native like unfolding sawtooth patterns showing an intact intermediate state. The mutation Y92P, which is near the end of G beta-strand, produced sawtooth patterns with all-or-none unfolding events that lengthened the molecule by 17(+/-2) nm. These results are consistent with the view that 10FNIII can unfold in two different ways. Along one pathway, the detachment of the A and B beta-strands from the body of the folded module constitute the first unfolding event, followed by the unfolding of the remaining beta-sandwich structure. Along the second pathway, the detachment of the G beta-strands is involved in the first unfolding event. These results are in excellent agreement with the sequence of events predicted by molecular dynamics simulations of the 10FNIII module.     

Monitoring biomolecular interactions by time-lapse atomic force microscopy

The atomic force microscope (AFM) is a unique imaging tool that enables the tracking of single macromolecule events in response to physiological effectors and pharmacological stimuli. Direct correlation can therefore be made between structural and functional states of individual biomolecules in an aqueous environment. This review explores how time-lapse AFM has been used to learn more about normal and disease-associated biological processes. Three specific examples have been chosen to illustrate the capabilities of this technique. In the cell, actin polymerizes into filaments, depolymerizes, and undergoes interactions with numerous effector molecules (i.e., severing, capping, depolymerizing, bundling, and cross-linking proteins) in response to many different stimuli. Such events are critical for the function and maintenance of the molecular machinery of muscle contraction and the dynamic organization of the cytoskeleton. One goal is to use time-lapse AFM to examine and manipulate some of these events in vitro, in order to learn more about how these processes occur in the cell. Aberrant protein polymerization into amyloid fibrils occurs in a multitude of diseases, including Alzheimer's and type 2 diabetes. Local amyloid deposits may cause organ dysfunction and cell death; hence, it is of interest to learn how to interfere with fibril formation. One application of time-lapse AFM in this area has been the direct visualization of amyloid fibril growth in vitro. This experimental approach holds promise for the future testing of potential therapeutic drugs, for example, by directly visualizing at which level of fibril assembly (i.e., nucleation, elongation, branching, or lateral association of protofibrils) a given active compound will interfere. Nuclear pore complexes (NPCs) are large supramolecular assemblies embedded in the nuclear envelope. Transport of ions, small molecules, proteins, RNAs, and RNP particles in and out of the nucleus occurs via NPCs. Time-lapse AFM has been used to structurally visualize the response of individual NPC particles to various chemical and physical effectors known to interfere with nucleocytoplasmic transport. Taken together, such time-lapse AFM studies could provide novel insights into the molecular mechanisms of fundamental biological processes under both normal and pathological conditions at the single molecule level.     

Cellular secretion studied by force microscopy

Using the optical microscope, real adventures in cellular research began in earnest in the latter half of the nineteenth century. With the development of the electron microscope, ultramicroscopy, and improved cell staining techniques, significant advances were made in defining intracellular structures at the nanometer level. The invention of force microscopy, the atomic force microscope (AFM) in the mid 1980s, and the photonic force microscope (PFM) in the mid 1990s, finally provided the opportunity to study live cellular structure-function at the nanometer level. Working with the AFM, dynamic cellular and subcellular events at the molecular level were captured in the mid 1990s, and a new cellular structure 'the porosome' in the plasma membrane of all secretory cells has been defined, where specific docking and fusion of secretory vesicles occur. The molecular mechanism of fusion of the secretory vesicle membrane at the base of the porosome membrane in cells, and the regulated release of intravesicular contents through the porosome opening to the extracellular space, has been determined. These seminal discoveries provide for the first time a molecular mechanism of cell secretion, and the possibility to ameliorate secretory defects in disease states.