Development of a Rapid Assimilable Organic Carbon Method for Water

A rapid method for measurement of assimilable organic carbon (AOC) is proposed. The time needed to perform the assay is reduced by increasing the incubation temperature and increasing the inoculum density. The ATP luciferin-luciferase method quickly enumerates the test organisms without the need for plate count media or dilution bottles. There was no significant difference between AOC values determined with strain P17 for the ATP and plate count procedures. For strain NOX, the plate count procedure underestimated bacterial levels in some samples. Comparison of AOC values obtained by the Belleville laboratory (by the ATP technique) and the Stroud Water Research Center (by plate counts) showed that values were significantly correlated and not significantly different. The study concludes that the rapid AOC method can quickly determine the bacterial growth potential of water within 2 to 4 days.     

Development and Validation of a UPLC Method for Rapid and Simultaneous Analysis of Proton Pump Inhibitors

Proton pump inhibitors (PPIs) are used extensively for the relief of gastroesophageal reflux, peptic ulcers, and other hypersecretory conditions. Some of the commonly used PPIs—omeprazole, esomeprazole, lansoprazole, pantoprazole, and rabeprazole—were used in this study with the aim of developing a rapid ultra performance liquid chromatography (UPLC) method for detecting each and allowing separation and quantification of a mixture of PPIs. An analysis of samples was performed on a UPLC system equipped with a quaternary solvent delivery system, a refrigerated sample manager, a column heater, a photo diode array detector scanning from 210 to 400 nm, and a C₁₈ analytical column (50 mm × 3.0 mm, 1.7-μm particle size). The chromatographic analysis of the PPI samples and standards was performed using gradient elution with acetonitrile and water. The calibration curve range varied for each of the PPIs ranging from a lower limit of 0.75–1.78 μg/mL to a maximum concentration of 200 μg/mL with a regression coefficient (r²) of ≥0.98. The accuracy and precision were calculated, and the %RSD was determined to be ≤0.21% (intraday) and ≤5% (interday). The LOD was 0.23–0.59 μg/mL and the LOQ was 0.71–1.78 μg/mL for each of the drugs analyzed. The method was capable of detecting and quantifying each drug in a mixture with good resolution and a total run time of less than 5 min. Herein, we report an efficient and rapid analytical method for the simultaneous detection of multiple PPIs in a mixture.KEY WORDS: HPLC, method development, proton pump inhibitors, simultaneous analysis, UPLC     

Culture-Independent Techniques for Rapid Detection of Bacteria Associated with Loss of Chloramine Residual in a Drinking Water System

Chloramination is often the disinfection regimen of choice for extended drinking water systems. However, this process is prone to instability due to the growth of nitrifying bacteria. This is the first study to use alternative approaches for rapid investigation of chloraminated drinking water system instability in which flow cytometric cell sorting of bacteria with intact membranes (membrane-intact fraction) (BacLight kit) or with active esterases (esterase-active fraction) (carboxyfluorescein diacetate) was combined with 16S rRNA gene-directed PCR and denaturing gradient gel electrophoresis (DGGE). No active bacteria were detected when water left the water treatment plant (WTP), but 12 km downstream the chloramine residual had diminished and the level of active bacteria in the bulk water had increased to more than 1 × 10⁵ bacteria ml⁻¹. The bacterial diversity in the system was represented by six major DGGE bands for the membrane-intact fraction and 10 major DGGE bands for the esterase-active fraction. PCR targeting of the 16S rRNA gene of chemolithotrophic ammonia-oxidizing bacteria (AOB) and subsequent DGGE and DNA sequence analysis revealed the presence of an active Nitrosospira-related species and Nitrosomonas cryotolerans in the system, but no AOB were detected in the associated WTP. The abundance of active AOB was then determined by quantitative real-time PCR (qPCR) targeting the amoA gene; 3.43 × 10³ active AOB ml⁻¹ were detected in the membrane-intact fraction, and 1.40 × 10⁴ active AOB ml⁻¹ were detected in the esterase-active fraction. These values were several orders of magnitude greater than the 2.5 AOB ml⁻¹ detected using a routine liquid most-probable-number assay. Culture-independent techniques described here, in combination with existing chemical indicators, should allow the water industry to obtain more comprehensive data with which to make informed decisions regarding remedial action that may be required either prior to or during an instability event.     

Using a BP Neural Network for Rapid Assessment of Populations with Difficulties Accessing Drinking Water Because of Drought

Accurately predicting the populations with difficulties accessing drinking water because of drought and taking appropriate mitigation measures can minimize economic loss and personal injury. Taking the 2013 Guizhou extreme summer drought as an example, on the basis of collecting meteorological, basic geographic information, socioeconomic data, and disaster effect data of the study area, a rapid assessment model based on a backpropagation (BP) neural network was constructed. Six factors were chosen for the input of the network: the average monthly precipitation, Digital Elevation Model (DEM), river density, population density, road density, and gross domestic product (GDP). The population affected by drought was the model's output. Using samples from 50 drought-affected counties in Guizhou Province for network training, the model's parameters were optimized. Using the trained model, the populations in need were predicted using the other 74 drought-affected counties. The accuracy of the prediction model, represented by the coefficient of determination (R²) and the normalized root mean square error (N-RMSE), yielded 0.7736 for R² and 0.0070 for N-RMSE. The method may provide an effective reference for rapid assessment of the population in need and disaster effect verification.     

National Field Evaluation of a Defined Substrate Method for the Simultaneous Enumeration of Total Coliforms and Escherichia coli from Drinking Water: Comparison with the Standard Multiple Tube Fermentation Method

[This corrects the article on p. 1596 in vol. 54.].     

Development and Evaluation of a Reflective Solar Disinfection Pouch for Treatment of Drinking Water

A second-generation solar disinfection (SODIS) system (pouch) was constructed from food-grade, commercially available packaging materials selected to fully transmit and amplify the antimicrobial properties of sunlight. Depending upon the season, water source, and challenge organism, culturable bacteria were reduced between 3.5 and 5.5 log cycles. The system was also capable of reducing the background presumptive coliform population in nonsterile river water below the level of detection. Similar experiments conducted with a model virus, the F-specific RNA bacteriophage MS2, indicated that the pouch was slightly less efficient, reducing viable plaques by 3.5 log units in comparison to a 5.0 log reduction of enterotoxigenic Escherichia coli O18:H11 within the same time period. These results suggest that water of poor microbiological quality can be improved by using a freely available resource (sunlight) and a specifically designed plastic pouch constructed of food-grade packaging materials.     

An Optimized Analytical Method for the Simultaneous Detection of Iodoform,Iodoacetic Acid,and Other Trihalomethanes and Haloacetic Acids in Drinking Water

An optimized method is presented using liquid-liquid extraction and derivatization for the extraction of iodoacetic acid (IAA) and other haloacetic acids (HAA₉) and direct extraction of iodoform (IF) and other trihalomethanes (THM₄) from drinking water, followed by detection by gas chromatography with electron capture detection (GC-ECD). A Doehlert experimental design was performed to determine the optimum conditions for the five most significant factors in the derivatization step: namely, the volume and concentration of acidic methanol (optimized values  = 15%, 1 mL), the volume and concentration of Na₂SO₄ solution (129 g/L, 8.5 mL), and the volume of saturated NaHCO₃ solution (1 mL). Also, derivatization time and temperature were optimized by a two-variable Doehlert design, resulting in the following optimized parameters: an extraction time of 11 minutes for IF and THM₄ and 14 minutes for IAA and HAA₉; mass of anhydrous Na₂SO₄ of 4 g for IF and THM₄ and 16 g for IAA and HAA₉; derivatization time of 160 min and temperature at 40°C. Under optimal conditions, the optimized procedure achieves excellent linearity (R² ranges 0.9990–0.9998), low detection limits (0.0008–0.2 µg/L), low quantification limits (0.008–0.4 µg/L), and good recovery (86.6%–106.3%). Intra- and inter-day precision were less than 8.9% and 8.8%, respectively. The method was validated by applying it to the analysis of raw, flocculated, settled, and finished waters collected from a water treatment plant in China.     

Development of a Rapid,Simple Method for Detecting Naegleria fowleri Visually in Water Samples by Loop-Mediated Isothermal Amplification (LAMP)

Naegleria fowleri is the causative agent of the fatal disease primary amebic meningoencephalitis. Detection of N. fowleri using conventional culture and biochemical-based assays is time-consuming and laborious, while molecular techniques, such as PCR, require laboratory skills and expensive equipment. We developed and evaluated a novel loop-mediated isothermal amplification (LAMP) assay targeting the virulence-related gene for N. fowleri. Time to results is about 90 min and amplification products were easily detected visually using hydroxy naphthol blue. The LAMP was highly specific after testing against related microorganisms and able to detect one trophozoite, as determined with spiked water and cerebrospinal fluid samples. The assay was then evaluated with a set of 80 water samples collected during the flooding crisis in Thailand in 2011, and 30 natural water samples from border areas of northern, eastern, western, and southern Thailand. N. fowleri was detected in 13 and 10 samples using LAMP and PCR, respectively, with a Kappa coefficient of 0.855. To the best of our knowledge, this is the first report of a LAMP assay for N. fowleri. Due to its simplicity, speed, and high sensitivity, the LAMP method described here might be useful for quickly detecting and diagnosing N. fowleri in water and clinical samples, particularly in resource-poor settings.     

A Rapid Method for Simultaneous Chemical Synthesis of Oligonucleotides in Large Nufiber

Abstract

A rapid manual method i s described for simultaneous synthem o v e r one hundred oligonucleotides on a microscale by the phosphotriester approach on cellulose paper.     

Integrated Metagenomic and Physiochemical Analyses to Evaluate the Potential Role of Microbes in the Sand Filter of a Drinking Water Treatment System

While sand filters are widely used to treat drinking water, the role of sand filter associated microorganisms in water purification has not been extensively studied. In the current investigation, we integrated molecular (based on metagenomic) and physicochemical analyses to elucidate microbial community composition and function in a common sand filter used to treat groundwater for potable consumption. The results revealed that the biofilm developed rapidly within 2 days (reaching ∼10¹¹ prokaryotes per gram) in the sand filter along with abiotic and biotic particulates accumulated in the interstitial spaces. Bacteria (up to 90%) dominated the biofilm microbial community, with Alphaproteobacteria being the most common class. Thaumarchaeota was the sole phylum of Archaea, which might be involved in ammonia oxidation. Function annotation of metagenomic datasets revealed a number of aromatic degradation pathway genes, such as aromatic oxygenase and dehydrogenase genes, in the biofilm, suggesting a significant role for microbes in the breakdown of aromatic compounds in groundwater. Simultaneous nitrification and denitrification pathways were confirmed as the primary routes of nitrogen removal. Dissolved heavy metals in groundwater, e.g. Mn²⁺ and As³⁺, might be biologically oxidized to insoluble or easily adsorbed compounds and deposited in the sand filter. Our study demonstrated that the role of the microbial community in the sand filter treatment system are critical to effective water purification in drinking water.     

Concentration and Detection of Cryptosporidium Oocysts in Surface Water Samples by Method 1622 Using Ultrafiltration and Capsule Filtration

The protozoan parasite Cryptosporidium parvum is known to occur widely in both source and drinking water and has caused waterborne outbreaks of gastroenteritis. To improve monitoring, the U.S. Environmental Protection Agency developed method 1622 for isolation and detection of Cryptosporidium oocysts in water. Method 1622 is performance based and involves filtration, concentration, immunomagnetic separation, fluorescent-antibody staining and 4′,6-diamidino-2-phenylindole (DAPI) counterstaining, and microscopic evaluation. The capsule filter system currently recommended for method 1622 was compared to a hollow-fiber ultrafilter system for primary concentration of C. parvum oocysts in seeded reagent water and untreated surface waters. Samples were otherwise processed according to method 1622. Rates of C. parvum oocyst recovery from seeded 10-liter volumes of reagent water in precision and recovery experiments with filter pairs were 42% (standard deviation [SD], 24%) and 46% (SD, 18%) for hollow-fiber ultrafilters and capsule filters, respectively. Mean oocyst recovery rates in experiments testing both filters on seeded surface water samples were 42% (SD, 27%) and 15% (SD, 12%) for hollow-fiber ultrafilters and capsule filters, respectively. Although C. parvum oocysts were recovered from surface waters by using the approved filter of method 1622, the recovery rates were significantly lower and more variable than those from reagent grade water. In contrast, the disposable hollow-fiber ultrafilter system was compatible with subsequent method 1622 processing steps, and it recovered C. parvum oocysts from seeded surface waters with significantly greater efficiency and reliability than the filter suggested for use in the version of method 1622 tested.     

Development of a Method for the Solid-Phase Peptide Synthesis in Water

Various organic solvents are routinely used in peptide synthesis, safe disposal of which are now an important environmental problem. To circumvent this problem, during the last few years we focused on developing an organic solvent-free SPPS method using aqueous solvents. For the SPPS in water, we designed protected amino acids that could be used in the aqueous media. Here we described development of several types of water-soluble protected amino acids and their application to the SPPS in water, and a novel technology that uses water-dispersible protected amino acids for in-water peptide synthesis.     

Field Evaluation of a Semiautomated Method for Rapid and Simple Analysis of Recreational Water Microbiological Quality

An early warning system using a rapid enzymatic semiautomated method suitable for fecal coliform detection in recreational waters within 8 h was developed further and evaluated in this study. This rapid method was compared to the standard method followed in the United Kingdom. We used 1,011 samples originating from 206 different locations in Wales. When we assessed the presence or absence of fecal coliforms, targeting very low levels of contamination, we obtained 83.9% agreement between the rapid method and the lauryl sulfate broth-membrane filtration technique, whereas direct confirmation of the samples processed by the rapid method showed 89.3% agreement. Environmental enzymatic background activity was found to be the main limiting factor for this method. Owing to a specific and integrated handling of the results by the software of the instrument, the percentage of false-positive results (a consequence of enzymatic background) was successfully limited to 2.9% by the direct confirmation evaluation. However, 7.8% false-negative results due to “late-growers” had to be accepted in order to produce results within a working day. At present, the method can be used in a more conservative way to assess the environmental threshold of 100 CFU of fecal coliforms per 100 ml in recreational waters. The implications of our findings with regard to the applicability of rapid enzymatic methods are discussed.     

Recovery and Detection of Escherichia coli O157:H7 in Surface Water,Using Ultrafiltration and Real-Time PCR

Enterohemorrhagic Escherichia coli O157:H7 (EHEC O157:H7) outbreaks have revealed the need for improved analytical techniques for environmental samples. Ultrafiltration (UF) is increasingly recognized as an effective procedure for concentrating and recovering microbes from large volumes of water and treated wastewater. This study describes the application of hollow-fiber UF as the primary step for concentrating EHEC O157:H7 seeded into 40-liter samples of surface water, followed by an established culture/immunomagnetic-separation (IMS) method and a suite of real-time PCR assays. Three TaqMan assays were used to detect the stx1, stx2, and rfbE gene targets. The results from this study indicate that approximately 50 EHEC O157:H7 cells can be consistently recovered from a 40-liter surface water sample and detected by culture and real-time PCR. Centrifugation was investigated and shown to be a viable alternative to membrane filtration in the secondary culture/IMS step when water quality limits the volume of water that can be processed by a filter. Using multiple PCR assay sets to detect rfbE, stx1, and stx2 genes allowed for specific detection of EHEC O157:H7 from strains that do not possess all three genes. The reported sample collection and analysis procedure should be a sensitive and effective tool for detecting EHEC O157:H7 in response to outbreaks of disease associated with contaminated water.Several highly publicized outbreaks of gastrointestinal diseases caused by enterohemorrhagic Escherichia coli O157:H7 (EHEC O157:H7) have highlighted the threat this pathogen poses to public health (1, 2, 3, 14). Although the predominant mode of transmission to humans appears to be contaminated meat or meat products, there have been a number of outbreaks associated with contaminated water (18). Microbiological, epidemiological, and environmental studies have found an association between EHEC O157:H7 outbreaks and recreational water, drinking water, crop irrigation, and wastewater (1, 2, 14). These investigations have also revealed that enhanced rapid analytical techniques are needed to improve the speed and effectiveness of these types of investigations.Hollow-fiber ultrafiltration (UF) is a sampling technique that is emerging as an option for recovering diverse microbes from large-volume water samples (8, 9, 12, 13, 15). There have been reports of the successful application of UF for surface water as well as for other E. coli strains (8, 13), but additional data are needed to evaluate the robustness of UF for surface water and its ability to effectively concentrate EHEC O157:H7 in the presence of background microbes. The presence of competitive microbes has been shown to significantly alter the growth rate and maximal density of EHEC O157:H7 in broth culture (5).EHEC O157:H7 is generally detected in water samples by using membrane filtration, selective broth enrichment, immunomagnetic-separation (IMS), and isolation on selective agar culture plates, followed by confirmatory tests such as PCR or serological tests (6, 7). However, sensitive detection of EHEC O157:H7 in surface waters can be difficult due to high levels of competing background microorganisms (7). Membrane filtration can also limit the volume processed for turbid surface waters due to filter clogging. Centrifugation is an alternative to membrane filtration and has an advantage of not being subject to potential sample volume processing constraints for turbid water samples, so the technique could potentially increase the sensitivity of detection. A number of PCR assays have been developed for detection of EHEC O157:H7 that target a variety of virulence genes (17). Testing multiple gene targets is necessary for accurate detection because certain non-EHEC O157:H7 serotypes and other bacterial species are known to possess the target genes; therefore, the isolate cannot be determined to be EHEC O157:H7 unless multiple assays show a positive signal (19).The goals of this study were to evaluate (i) the effectiveness of a previously reported UF method (8) for application to recovering EHEC O157:H7, (ii) the effectiveness of the culture/IMS technique performed in conjunction with primary UF concentration, (iii) the effectiveness of centrifugation as an alternative for membrane filtration in the culture/IMS method, and (iv) the ability of three previously reported real-time PCR assays to accurately detect EHEC O157:H7 in surface waters (16, 17).     

Advantage Provided by Iron for Escherichia coli Growth and Cultivability in Drinking Water

The presence of iron, used both as a nutrient and as an electron acceptor, was demonstrated to give an advantage to Escherichia coli bacteria in drinking water. Slight additions of ferrous sulfate to water with initial low iron concentrations led to a significant increase in the number of E. coli bacteria. The presence of ferric oxide in water under anaerobic conditions increased bacterial cultivability.     

Comparison of Barium and Arsenic Concentrations in Well Drinking Water and in Human Body Samples and a Novel Remediation System for These Elements in Well Drinking Water

Health risk for well drinking water is a worldwide problem. Our recent studies showed increased toxicity by exposure to barium alone (≤700 µg/L) and coexposure to barium (137 µg/L) and arsenic (225 µg/L). The present edition of WHO health-based guidelines for drinking water revised in 2011 has maintained the values of arsenic (10 µg/L) and barium (700 µg/L), but not elements such as manganese, iron and zinc. Nevertheless, there have been very few studies on barium in drinking water and human samples. This study showed significant correlations between levels of arsenic and barium, but not its homologous elements (magnesium, calcium and strontium), in urine, toenail and hair samples obtained from residents of Jessore, Bangladesh. Significant correlation between levels of arsenic and barium in well drinking water and levels in human urine, toenail and hair samples were also observed. Based on these results, a high-performance and low-cost adsorbent composed of a hydrotalcite-like compound for barium and arsenic was developed. The adsorbent reduced levels of barium and arsenic from well water in Bangladesh and Vietnam to <7 µg/L within 1 min. Thus, we have showed levels of arsenic and barium in humans and propose a novel remediation system.