Specificity of RepC protein in plasmid pT181 DNA replication

The plasmid pT181 of Staphylococcus aureus consists of 4437 base pairs and encodes resistance to tetracycline. Initiation of pT181 DNA replication specifically requires the plasmid-encoded initiator protein, RepC. The initiator protein binds specifically to a 32-base pair sequence within the pT181 origin of replication. RepC protein also has a nicking-closing activity that is specific for the pT181 origin. Replication of pT181 initiates by covalent extension of the nick and proceeds by a rolling circle mechanism. Two other small, multicopy plasmids pC221 and pS194 belong to the pT181 family and have common structural organization and replication properties. The replication proteins and replication origins of these plasmids have extensive sequence homologies, although they belong to different incompatibility groups. In spite of this homology, the replication proteins and replication origins of these three plasmids do not show any cross-reactivity in vivo. We have carried out a series of in vitro experiments to determine the specificity of pT181-encoded initiator protein, RepC. DNA binding experiments showed that although the binding of RepC to the pT181 origin was very efficient, little or no binding was seen with pC221 and pS194 origins. The nicking-closing activity of RepC was found to be equally efficient with the pC221 and pS194 plasmids. The plasmids pC221 and pS194 replicated efficiently in a RepC-dependent in vitro system. However, replication of these plasmids was greatly reduced in the presence of a competing pT181 origin. The results presented here suggest that nicking-closing by RepC at the origin is not sufficient for maximal replication and that tight binding of RepC to the origin plays an important role in the initiation of DNA replication.     

Replication-specific conversion of the Staphylococcus aureus pT181 initiator protein from an active homodimer to an inactive heterodimer.

The Staphylococcus aureus rolling circle plasmid pT181 regulates its replication by controlling the synthesis of its initiator protein RepC. RepC is inactivated during pT181 replication by the addition of an oligodeoxynucleotide, giving rise to a new form, RepC*. We analyzed RepC and RepC* in four classes of mutants: plasmid copy number mutants, two classes of RepC mutants affecting different portions of the protein and oriC (origin) mutants. We have found that in the cell with wild-type RepC there are similar relative amounts of RepC and RepC*, regardless of copy number, and that the conversion of RepC to RepC* is replication dependent. Genetic and biochemical evidence is presented that RepC functions as a dimer and that during replication the RepC homodimer is converted to the RepC/RepC* heterodimer.     

Modification of the plasmid initiator protein RepC active site during replication

Abstract pT181 is a Staphylococcus aureus rolling circle replicating plasmid whose copy number is controlled by regulating the synthesis and activity of the initiator protein, RepC. The RepC dimer is modified during pT181 replication by the addition of an oligodeoxynucleotide, giving rise to a new form, RepC*. To purify RepC*, RepC was expressed in S. aureus as a fusion protein with a polyhistidine tail. The histidine-tagged RepC retains its initiation and topoisomerase activities in vitro. Histagged RepC/RepC and RepC/RepC* were purified in a two-step procedure. Peptide mapping, mass spectrometric analysis and protein sequencing of purified RepC and RepC* were carried out, and both proteins appeared identical, except that the peptide containing the RepC active site tyrosine used in nicking activity was absent when the purified RepC* sample was analyzed. The absence of the active site in RepC* suggests that this site was modified during replication. The results provide the first direct biochemical evidence that RepC* is a modified form of RepC, and support a model in which RepC replication of pT181 leaves RepC with an oligonucleotide blocking the active site of one of its subunits.     

The inactivated plasmid inititator protein RepC/RepC* may have a regulatory role.

During replication of the plasmid pT181, the initiator protein RepC is modified by the addition of an oligodeoxynucleotide, giving rise to a new form, RepC*. Here we show that during in vitro replication, RepC* is radioactively labeled, suggesting that the source of the RepC* oligodeoxynucleotide is the newly synthesized pT181 DNA. The RepC/RepC* heterodimer retains its ability to bind the pT181 double-strand origin and, therefore, it may act as a competitive inhibitor of the RepC homodimer during replication.     

In vitro studies of the initiation of staphylococcal plasmid replication. Specificity of RepD for its origin (oriD) and characterization of the Rep-ori tyrosyl ester intermediate

Several staphylococcal plasmids from different incompatibility (inc) groups which replicate by a rolling circle mechanism each specify a replication initiator protein (Rep) which is homologous with that of the inc3 tetracycline resistance plasmid pT181. The rep gene sequences of six pT181-like plasmids are known, each encoding proteins of molecular mass 38 kDa with 62% overall amino acid sequence identity. The initiation of replication in vivo by each of the Rep proteins is plasmid specific, acting in trans only at the cognate replication origin (ori) of the encoding plasmid. Previous studies in vitro of the RepC protein of pT181 demonstrated replication initiator, topoisomerase-like, and DNA binding activities, which appeared to be specific for the origin (oriC) of pT181 when compared with unrelated staphylococcal plasmids. Although RepD, specified by the inc4 chloramphenicol resistance plasmid pC221, has a range of activities similar to those noted previously for RepC, manipulation of in vitro conditions has revealed discrete steps in the overall reaction of RepD with oriD. In addition, factors have been identified which are necessary not only for sequence-dependent discrimination in vitro by Rep proteins for all pT181-like plasmids but also for the absolute specificity of RepD for its cognate pC221 replication origin (oriD), the latter occurring in vivo and a function of the topological state of the ori-containing target DNA. Here we also demonstrate the presence of a covalent phosphoryl-tyrosine linkage between the RepD protein of plasmid pC221 and an oligonucleotide substrate corresponding to its replication origin (oriD). The reactive tyrosine (Tyr-188) was identified from amino acid sequences of 32P-labeled peptide-oligonucleotide fragments. Substitution of Tyr-188 with phenylalanine confirms the importance of the tyrosyl hydroxyl group since the Y188F protein retains the sequence-specific DNA-binding capabilities of wild-type RepD but is unable to attach covalently to the replication origin or participate in the nicking-closing reaction in vitro.     

Bacillus anthracis and Bacillus cereus PcrA helicases can support DNA unwinding and in vitro rolling-circle replication of plasmid pT181 of Staphylococcus aureus

Replication of rolling-circle replicating (RCR) plasmids in gram-positive bacteria requires the unwinding of initiator protein-nicked plasmid DNA by the PcrA helicase. In this report, we demonstrate that heterologous PcrA helicases from Bacillus anthracis and Bacillus cereus are capable of unwinding Staphylococcus aureus plasmid pT181 from the initiator-generated nick and promoting in vitro replication of the plasmid. These helicases also physically interact with the RepC initiator protein of pT181. The ability of PcrA helicases to unwind noncognate RCR plasmids may contribute to the broad-host-range replication and dissemination of RCR plasmids in gram-positive bacteria.     

The PcrA3 mutant binds DNA and interacts with the RepC initiator protein of plasmid pT181 but is defective in its DNA helicase and unwinding activities

Plasmid rolling-circle replication initiates by covalent extension of a nick generated at the plasmid double-strand origin (dso) by the initiator protein. The RepC initiator protein binds to the plasmid pT181 dso in a sequence-specific manner and recruits the PcrA helicase through a protein-protein interaction. Subsequently, PcrA unwinds DNA at the nick site followed by replication by DNA polymerase III. The pcrA3 mutant of Staphylococcus aureus has previously been shown to be defective in plasmid pT181 replication. Suppressor mutations in the repC initiator gene have been isolated that allow pT181 replication in the pcrA3 mutant. One such suppressor mutant contains a D57Y change in the RepC protein. To identify the nature of the defect in PcrA3, we have purified this mutant protein and studied its biochemical activities. Our results show that while PcrA3 retains its DNA binding activity, it is defective in its helicase and RepC-dependent pT181 DNA unwinding activities. We have also purified the RepC D57Y mutant and shown that it is similar in its biochemical activities to wild-type RepC. RepC D57Y supported plasmid pT181 replication in cell-free extracts made from wild-type S. aureus but not from the pcrA3 mutant. We also demonstrate that both wild-type RepC and its D57Y mutant are capable of a direct physical interaction with both wild-type PcrA and the PcrA3 mutant. Our results suggest that the inability of PcrA3 to support pT181 replication is unlikely to be due to its inability to interact with RepC. Rather, it is likely that a defect in its helicase activity is responsible for its inability to replicate the pT181 plasmid.     

An 18-base-pair sequence is sufficient for termination of rolling-circle replication of plasmid pT181.

pT181 and related plasmids of gram-positive bacteria replicate by a rolling-circle mechanism. The replication initiator protein of pT181, RepC, has origin-specific nicking-closing activities. Replication of the plasmid pT181 leading strand initiates by covalent extension of the RepC-generated nick, and the origin of replication contains signals for both initiation and termination of DNA replication. We have investigated the sequence requirements for the initiation and termination steps by using plasmids containing two pT181 origins. In vitro replication experiments showed that 18- and 24-bp synthetic oligonucleotides containing the RepC nick site were active in the termination of replication. However, initiation of replication required a larger region which also includes the RepC binding site. Plasmids containing the 18- and 24-bp region were also found to be nicked by the RepC protein. Our results demonstrate that sequence requirements for initiation and termination of pT181 replication overlap, but while the RepC binding site is required for initiation, it is dispensable for termination.     

Specificity of the interactions between the Rep proteins and the origins of replication of Staphylococcus aureus plasmids pT181 and pC221

Summary pT181 and pC221 are closely relatedStaphylococcus aureus plasmids with the same genome organization, which is characterized by the overlapping of the origin of replication with the sequence encoding a protein, Rep, essential for plasmid replication. Former results have shown the lack of in vivo cross-complementation between these two plasmids, while in vitro studies have revealed the ability of both Rep proteins to act on either origin. One possible explanation for this difference was based on a previous analysis of the incompatibility expressed by the origin of replication of these plasmids, showing that the origin embedded in therep gene competes for Rep utilization with the origin of a test plasmid and that changes in the sequence of the origin reduce its ability to compete. To avoid this problem, in the present work special hybrids were constructed in which the origin of replication overlapping therep gene was mutationally inactivated, without changing the amino acid sequence of the encoded protein. The level of Rep expression by these hybrids could be varied by taking advantage of what is presently known about the control of Rep synthesis in plasmid pT181. The results of complenentation studies conducted using these hybrids have shown that: (i) at the usual level of expression for a wild-type plasmid each Rep protein can initiate replication strictly from its corresponding origin; (ii) when overproduced, the pT181 RepC protein could also act efficiently on the pC221 origin; a functional pT181 origin present in the same host completely prevented this complementation; (iii) in excess, the RepD protein encoded by pC221 could replicate a plasmid carrying the pT181 origin but could not ensure the hereditary stability of such a plasmid in the absence of another active replication system; (iv) when overproduced both RepC and RepD could act on the origin of replication of three other related plasmids pS194, pC223 and pUB112.     

RepC is rate limiting for pT181 plasmid replication

The effect on pT181 plasmid replication of the concentration of the plasmid-coded initiator protein, RepC, has been analyzed. In one type of experiment, plasmid replication was found to stop immediately after the addition of an inhibitory concentration of chloramphenicol (Cm) to growing cultures. Chromosomal replication showed the slow turnoff that is usual for Cm inhibition. Because plasmid replication rate is determined autogenously, no host factor can be rate limiting, suggesting that the specific factor affected is Rep C. In another type of experiment, we constructed a translational fusion between the repC coding sequence and a translationally inducible Cm-acetylase gene, cat-86, using pUB110 as the carrier replicon. The fusion plasmid showed an eightfold amplification of its own copy number and a similar amplification of a co-resident pT181 plasmid upon Cm induction. The amplified plasmids did not show autocatalytic runaway replication but rather established stable elevated copy numbers, indicating the existence of a secondary level of regulation. These results suggest that RepC is rate limiting for pT181 replication and support the hypothesis that pT181 replication is regulated at the level of RepC synthesis. The nature of the secondary regulation is unknown.     

Plasmid pT181 replication is decreased at high levels of RepC per plasmid copy

The replication of staphylococcal plasmid pT181 is indirectly controlled at the level of the synthesis of its replication initiator, RepC. As a result, high levels of RepC synthesis per plasmid copy were expected to lead to autocatalytic plasmid replication, which secondarily would affect host physiology. Surprisingly, RepC overexpression was found to lead to a rapid decrease in pT181 copy number and replication rate. These effects depended on the ratio of RepC lo the PT181 replication origin rather than on the absolute amount of RepC in the cell. In a wild-type host, the increase in RepC/plasmid copy also inhibited chromosome replication and cell division. The changes in host physiology did not play any role in the decrease in pT181 replication caused by RepC overexpression since pT181 replication responded in the same way in a host mutant insensitive to the effects of RepC induction. These results suggest that pT181, the prototype of an entire class of plasmids from Gram-positive bacteria, responds to overexpression of its replication initiator by a decrease in plasmid replication.     

In vitro inhibitory activity of RepC/C*, the inactivated form of the pT181 plasmid initiation protein, RepC.

pT181 is a Staphylococcus aureus rolling circle plasmid that regulates its replication by controlling the synthesis of its dimeric initiator protein RepC/C and by inactivating the protein following its use in replication (A. Rasooly and R. P. Novick, Science 262:1048-1050, 1993). This inactivation consists of the addition of an oligonucleotide, representing several nucleotides immediately 3' to the initiation nick site, to the active site tyrosine of one of the two subunits, generating a heterodimer, RepC/C*. Previous results suggested that the inactive form was metabolically stable and was present at a much higher level than the active form (A. Rasooly and R. P. Novick, Science 262:1048-1050, 1993). In the present study we have measured total RepC antigen as a function of plasmid copy number and have analyzed the interaction of the two forms. We find that pT181-containing staphylococci contain approximately one RepC dimer per plasmid copy over a 50-fold range of copy numbers. This is consistent with previous measurements of the rate of RepC synthesis, which suggested that one RepC dimer is synthesized per replication event (J. Bargonetti, P.-Z. Wang and R. P. Novick, EMBO J. 12:3659-3667, 1993). The RepC/C* heterodimer, which is inactive for replication, is a competitive inhibitor of the replication and the topoisomerase-like and cruciform-enhancing activities of the native protein. These results suggest that the inactive form may have a specific regulatory role in vivo. Since the known plasmid-determined controls, which maintain a constant plasmid copy number, are designed to ensure the synthesis of one RepC/C dimer per plasmid replication event, it is difficult to envision any role for yet another negative regulator of replication. Conceivably, under conditions where the initiator is overproduced, such as in the absence of the normal antisense regulation of initiator production, RepC/C* could serve as a fail-safe means of preventing autocatalytic replication.     

Role of the double-strand origin cruciform in pT181 replication

pT181 is a small rolling-circle plasmid from Staphylococcus aureus whose initiator protein, RepC, melts the plasmid's double-strand origin (DSO) and extrudes a cruciform involving IR II, a palindrome flanking the initiation nick site. We have hypothesized that the cruciform is required for initiation, providing a single-stranded region for the assembly of the replisome (R. Jin et al., 1997, EMBO J. 16, 4456-4566). In this study, we have tested the requirement for cruciform extrusion by disrupting the symmetry of the IR II palindrome or by increasing its length. The modified DSOs were tested for replication with RepC in trans. Rather surprisingly, disruption of the IR II symmetry had no detectable effect on replication or on competitivity of the modified DSO, though plasmids with IR II disrupted were less efficiently relaxed than the wild type by RepC. However, in conjunction with IR II disruption, modification of the tight RepC binding site IR III blocked replication. These results define two key elements of the pT181 initiation mechanism--the IR II conformation and the RepC binding site (IR III)--and they indicate that pT181 replication initiation is sufficiently robust to be able to compensate for significant modifications in the configuration of the DSO.     

Measurement of gene expression by translational coupling: effect of copy mutations on pT181 initiator synthesis.

We have prepared and analyzed two types of gene fusion between the replication initiator gene, repC, and the reporter gene, blaZ, in order to investigate the relationship between pT181 plasmid copy number and RepC initiator protein production. A series of pT181 copy mutant plasmids, with copy numbers ranging from 70 to 800 copies per cell, were analyzed. In one type of gene fusion used in this study, blaZ was translationally coupled to the C-terminal end of the repC coding sequence such that native forms of both proteins were produced. This gene fusion arrangement, which permitted monitoring of RepC production (as BlaZ activity) by plasmids using the protein for their own replication, demonstrated a linear relationship, with one exception, between RepC production and plasmid copy number over a 20-fold range. In the second type of fusion, blaZ was translationally fused to the C-terminal end of repC. As the translational fusion did not produce active RepC protein, the fusion-containing pT181 derivatives were maintained in a strain which provided RepC in trans, and were thus analyzed at constant copy number. In contrast to previous analyses of this type, our translational fusion constructs expressed repC at levels proportional to the copy numbers of the plasmids from which the fusions were prepared. Using these data, we have calculated a minimum figure for the number of RepC molecules synthesized per replication event.     

An enhancer of DNA replication.

cmp, a nucleotide sequence element in the plasmid pT181 of Staphylococcus aureus, acts as an enhancer of DNA replication. When cmp is present on an unrelated vector along with the pT181 origin of replication, it increases the ability of the linked pT181 origin to compete with a coresident pT181 plasmid for the initiator protein RepC. cmp is contained within a 156-base-pair segment, and its deletion from pT181 reduces by twofold the frequency of plasmid replication under derepressed conditions. The enhancer sequence contains a locus of DNA bending, and enhancer activity decreases with distance from the replication origin.     

Biochemical characterization of the Staphylococcus aureus PcrA helicase and its role in plasmid rolling circle replication

Previous genetic studies have suggested that a putative chromosome-encoded helicase, PcrA, is required for the rolling circle replication of plasmid pT181 in Staphylococcus aureus. We have overexpressed and purified the staphylococcal PcrA protein and studied its biochemical properties in vitro. Purified PcrA helicase supported the in vitro replication of plasmid pT181. It had ATPase activity that was stimulated in the presence of single-stranded DNA. Unlike many replicative helicases, PcrA was highly active as a 5' --> 3' helicase and had a weaker 3' --> 5' helicase activity. The RepC initiator protein encoded by pT181 nicks at the origin of replication and becomes covalently attached to the 5' end of the DNA. The 3' OH end at the nick then serves as a primer for displacement synthesis. PcrA helicase showed an origin-specific unwinding activity with supercoiled plasmid pT181 DNA that had been nicked at the origin by RepC. We also provide direct evidence for a protein-protein interaction between PcrA and RepC proteins. Our results are consistent with a model in which the PcrA helicase is targeted to the pT181 origin through a protein-protein interaction with RepC and facilitates the movement of the replisome by initiating unwinding from the RepC-generated nick.     

Force and twist dependence of RepC nicking activity on torsionally-constrained DNA molecules

Many bacterial plasmids replicate by an asymmetric rolling-circle mechanism that requires sequence-specific recognition for initiation, nicking of one of the template DNA strands and unwinding of the duplex prior to subsequent leading strand DNA synthesis. Nicking is performed by a replication-initiation protein (Rep) that directly binds to the plasmid double-stranded origin and remains covalently bound to its substrate 5′-end via a phosphotyrosine linkage. It has been proposed that the inverted DNA sequences at the nick site form a cruciform structure that facilitates DNA cleavage. However, the role of Rep proteins in the formation of this cruciform and the implication for its nicking and religation functions is unclear. Here, we have used magnetic tweezers to directly measure the DNA nicking and religation activities of RepC, the replication initiator protein of plasmid pT181, in plasmid sized and torsionally-constrained linear DNA molecules. Nicking by RepC occurred only in negatively supercoiled DNA and was force- and twist-dependent. Comparison with a type IB topoisomerase in similar experiments highlighted a relatively inefficient religation activity of RepC. Based on the structural modeling of RepC and on our experimental evidence, we propose a model where RepC nicking activity is passive and dependent upon the supercoiling degree of the DNA substrate.     

Reciprocal intrapool variation in plasmid copy numbers: a characteristic of segregational incompatibility

An experimental analysis of the concept that incompatible plasmids occupy a common intracellular pool from which copies are drawn at random for replication and assortment is presented. Intrapool variations in an incompatible heteroplasmid strain are inevitable and it is shown that these variations can be exploited by differential selection to amplify one plasmid at the expense of the other. Constant overall copy number is demonstrated for isogenic wild-type replicons and also for isogenic copy mutants whose copy numbers are so great that segregational incompatibility cannot be measured. In the test system used, that of the Staphylococcus aureus plasmid pT181, the rate of replication is probably determined by the availability of a trans-active initiator protein, RepC. In heteroplasmid strains containing wild-type and dominant copy mutant plasmids, although intrapool variation occurs, the total copy number is not constant but varies as a consequence of selection for or against the mutant plasmid. This is because all of the RepC is synthesized from the mutant plasmid (the wild-type is hyper-repressed) and therefore the selection affects the supply of RepC at the same time that it affects the copy number of the plasmid. None of these effects are seen with single plasmids or with compatible pairs.     

Control of pT181 replication I. The pT181 copy control function acts by inhibiting the synthesis of a replication protein

pT181 is a fully sequenced 4.4-kb 20 copy Tcr plasmid from Staphylococcus aureus. Its replication system involves a unique unidirectional origin embedded in the coding sequence for a plasmid-determined protein, RepC, that is required for initiation. When joined to a 55 copy carrier plasmid, pE194, pT181 excludes autonomous isologous replicons by inhibiting their replication. Two types of spontaneous pT181 copy mutants have been isolated, one that eliminates sensitivity to this inhibition and another that does not. A spontaneous 180-bp deletion, delta 144, eliminates both the inhibitory activity and sensitivity to it. This deletion increases copy number by 50-fold and RepC production by at least 10-fold. It is located directly upstream from the repC coding sequence and the deletion-bearing plasmid supports the replication of inhibitor-sensitive plasmids in cells containing active inhibitor. This effect is probably due to the overproduction of RepC by the delta 144 plasmid. On the basis of these results, it is suggested that RepC synthesis is negatively controlled by an inhibitor that is encoded directly upstream from the repC coding sequence and acts as a tareget set in the same region. It is likely, therefore, that pT181 replication rate is determined by the level of RepC.