Global gene expression in Escherichia coli biofilms

It is now apparent that microorganisms undergo significant changes during the transition from planktonic to biofilm growth. These changes result in phenotypic adaptations that allow the formation of highly organized and structured sessile communities, which possess enhanced resistance to antimicrobial treatments and host immune defence responses. Escherichia coli has been used as a model organism to study the mechanisms of growth within adhered communities. In this study, we use DNA microarray technology to examine the global gene expression profile of E. coli during sessile growth compared with planktonic growth. Genes encoding proteins involved in adhesion (type 1 fimbriae) and, in particular, autoaggregation (Antigen 43) were highly expressed in the adhered population in a manner that is consistent with current models of sessile community development. Several novel gene clusters were induced upon the transition to biofilm growth, and these included genes expressed under oxygen-limiting conditions, genes encoding (putative) transport proteins, putative oxidoreductases and genes associated with enhanced heavy metal resistance. Of particular interest was the observation that many of the genes altered in expression have no current defined function. These genes, as well as those induced by stresses relevant to biofilm growth such as oxygen and nutrient limitation, may be important factors that trigger enhanced resistance mechanisms of sessile communities to antibiotics and hydrodynamic shear forces.     

The formation of mixed culture biofilms of oral species along a gradient of shear stress

A chemostat mixed culture system was used to produce two distinct ecological states, state-1 (caries-like microcosm) and state-2 (periodontal-like microcosm). Eleven bacterial species (Streptococcus gordonii, Strep. mitis I, Strep. mutans, Strep. oralis, Actinomyces naeslundii, Lactobacillus casei, Neisseria subflava, Fusobacterium nucleatum, Porphyromonas gingivalis, Prevotella nigrescens, Veillonella dispar) were used to inoculate the planktonic system. A flow cell, designed to produce convergent flow with increasing shear stress, was attached to the chemostat system, and the resultant biofilms developed from the state-1 and state-2 microcosms along the shear stress gradient were examined and compared using image analysis and viable counts. The biofilm produced from state-1 showed a lower shear stress tolerance (0.146 Pa) than the state-2 biofilm (0.236 Pa). The biofilm compositions did not vary along the gradient of shear stress and were dependent on the initial inoculum conditions. Gram-positive species were predominant in the state-1 biofilm, while Gram-negative species were predominant in state-2.     

The impact of culture medium on the development and physiology of biofilms of Pseudomonas fluorescens formed on polyurethane paint

Microbial biofilms cause the deterioration of polymeric coatings such as polyurethanes (PUs). In many cases, microbes have been shown to use the PU as a nutrient source. The interaction between biofilms and nutritive substrata is complex, since both the medium and the substratum can provide nutrients that affect biofilm formation and biodeterioration. Historically, studies of PU biodeterioration have monitored the planktonic cells in the medium surrounding the material, not the biofilm. This study monitored planktonic and biofilm cell counts, and biofilm morphology, in long-term growth experiments conducted with Pseudomonas fluorescens under different nutrient conditions. Nutrients affected planktonic and biofilm cell numbers differently, and neither was representative of the system as a whole. Microscopic examination of the biofilm revealed the presence of intracellular storage granules in biofilms grown in M9 but not yeast extract salts medium. These granules are indicative of nutrient limitation and/or entry into stationary phase, which may impact the biodegradative capability of the biofilm.     

The stringent response genes relA and spoT are important for Escherichia coil biofilms under slow-growth conditions

In order to see whether the stringent response was involved in biofilm formation, Escherichia coli DS291 (MG1655), and its isogenic relA spoT derivative were grown for 48 h in a chemostat at dilution rates of 0.025 and 0.25 h(-1) under serine limitation. The absence of the stringent response genes relA and spoT had little effect on the planktonic cell concentrations. However, a significant (P < 0.001) reduction in biofilm cell density of the relA spoT mutants was seen at a doubling time of 40 h. At a doubling time of 4 h, differences in biofilm cell density were not significant. Scanning confocal laser microscopy demonstrated the cell densities of microcolonies in the relA spoT mutant to be lower than those in the wild type. Using a microtiter plate assay, we found biofilm formation in relA spoT mutants to be similarly reduced in minimal media but to be enhanced in rich media (Luria-Bertani broth). No significant differences in biofilm formation were observed between wild type and isogenic relA mutants under any growth conditions. Overall, these results suggest that both stringent response genes relA and spoT are important in nutrient-limited biofilms.     

Characterization of planktonic and biofilm cells from two filamentous cyanobacteria using a shotgun proteomic approach

Abstract

Cyanobacteria promote marine biofouling with significant impacts. A qualitative proteomic analysis, by LC-MS/MS, of planktonic and biofilm cells from two cyanobacteria was performed. Biofilms were formed on glass and perspex at two relevant hydrodynamic conditions for marine environments (average shear rates of 4?s^?1 and 40?s^?1). For both strains and surfaces, biofilm development was higher at 4?s^?1. Biofilm development of Nodosilinea sp. LEGE 06145 was substantially higher than Nodosilinea sp. LEGE 06119, but no significant differences were found between surfaces. Overall, 377 and 301 different proteins were identified for Nodosilinea sp. LEGE 06145 and Nodosilinea sp. LEGE 06119. Differences in protein composition were more noticeable in biofilms formed under different hydrodynamic conditions than in those formed on different surfaces. Ribosomal and photosynthetic proteins were identified in most conditions. The characterization performed gives new insights into how shear rate and surface affect the planktonic to biofilm transition, from a structural and proteomics perspective.     

A novel planar flow cell for studies of biofilm heterogeneity and flow-biofilm interactions

Biofilms are microbial communities growing on surfaces, and are ubiquitous in nature, in bioreactors, and in human infection. Coupling between physical, chemical, and biological processes is known to regulate the development of biofilms; however, current experimental systems do not provide sufficient control of environmental conditions to enable detailed investigations of these complex interactions. We developed a novel planar flow cell that supports biofilm growth under complex two-dimensional fluid flow conditions. This device provides precise control of flow conditions and can be used to create well-defined physical and chemical gradients that significantly affect biofilm heterogeneity. Moreover, the top and bottom of the flow chamber are transparent, so biofilm growth and flow conditions are fully observable using non-invasive confocal microscopy and high-resolution video imaging. To demonstrate the capability of the device, we observed the growth of Pseudomonas aeruginosa biofilms under imposed flow gradients. We found a positive relationship between patterns of fluid velocity and biofilm biomass due to faster microbial growth under conditions of greater local nutrient influx, but this relationship eventually reversed because high hydrodynamic shear leads to the detachment of cells from the surface. These results reveal that flow gradients play a critical role in the development of biofilm communities. By providing new capability for observing biofilm growth, solute and particle transport, and net chemical transformations under user-specified environmental gradients, this new planar flow cell system has broad utility for studies of environmental biotechnology and basic biofilm microbiology, as well as applications in bioreactor design, environmental engineering, biogeochemistry, geomicrobiology, and biomedical research.     

Possible involvement of the division cycle in dispersal of Escherichia coli from biofilms.

Growth rate control of adherent, sessile populations was achieved by the controlled perfusion of membrane-associated bacterial biofilms by the method of Gilbert et al. (P. Gilbert, D. G. Allison, D. J. Evans, P. S. Handley, and M. R. W. Brown, Appl. Environ. Microbiol. 55:1308-1311, 1989). Changes in cell surface hydrophobicity were evaluated with respect to growth rate for such sessile Escherichia coli cells and compared with those of suspended (planktonic) populations grown in a chemostat. Newly formed daughter cells shed at the various growth rates from the biofilm during its growth and development were also included in the study. Surface hydrophobicity decreased with growth rate similarly for both planktonic and sessile E. coli; no significant differences were noted between the two. Daughter cells dislodged from the biofilm, however, were significantly more hydrophilic than those remaining, indicating that hydrophobicity changed during the division cycle. Our data support the hypothesis that dispersal of cells from adhesive biofilms and recolonization of new surfaces reflect cell-cycle-mediated events.     

Use of heterotrophic CO2 assimilation as a measure of metabolic activity in planktonic and sessile bacteria

We have examined whether assimilation of CO2 can be used as a measure of metabolic activity in planktonic and sessile heterotrophic bacteria. CO2 assimilation by environmental samples and pure cultures of heterotrophic bacteria was studied using 14CO2 and 13CO2 as tracers. Heterotrophic growth on complex organic substrates resulted in assimilation of CO2 into cell biomass by activated sludge, drinking water biofilm, and pure cultures of Escherichia coli ATCC 25922, Es. coli ATCC 13706, Rhodococcus ruber, Burkholderia sp., Bacillus circulans, Pseudomonas putida, Pseudomonas stutzeri, and Pseudomonas aeruginosa. Analysis of 13C-labelled phospholipid fatty acids (PLFAs) confirmed that heterotrophic bacteria may assimilate 13CO2 into cell macromolecules such as membrane lipids. All major PLFAs extracted from activated sludge and drinking water biofilm samples were enriched in 13C after incubation with CO2. Between 1.4% and 6.5% of the biomass produced by cultures of P. putida and a drinking water biofilm during growth in complex media was apparently derived from assimilation of CO2. Resting cells assimilated less CO2 compared to actively growing cells, and CO2 assimilation activity correlated with the amount of biomass produced during heterotrophic growth. The 14CO2 assimilation assay was evaluated as a tool to examine inhibitory effects of biocides on planktonic and sessile heterotrophs (biofilms). On the basis of 14CO2 assimilation activity, the minimum inhibitory concentration (MIC) of benzalkonium chloride was estimated to 21.1 and 127.2 mg l(-1) for planktonic and biofilm samples, respectively. The results indicate that assimilation of isotopically labelled CO2 can be used as a relatively simple measure of metabolic activity in heterotrophic bacteria. CO2 assimilation assays may be used to study the effects of antimicrobial agents on growth and survival of planktonic and sessile heterotrophic organisms.     

Direct upstream motility in Escherichia coli

We provide an experimental demonstration of positive rheotaxis (rapid and continuous upstream motility) in wild-type Escherichia coli freely swimming over a surface. This hydrodynamic phenomenon is dominant below a critical shear rate and robust against Brownian motion and cell tumbling. We deduce that individual bacteria entering a flow system can rapidly migrate upstream (>20 μm/s) much faster than a gradually advancing biofilm. Given a bacterial population with a distribution of sizes and swim speeds, local shear rate near the surface determines the dominant hydrodynamic mode for motility, i.e., circular or random trajectories for low shear rates, positive rheotaxis for moderate flow, and sideways swimming at higher shear rates. Faster swimmers can move upstream more rapidly and at higher shear rates, as expected. Interestingly, we also find on average that both swim speed and upstream motility are independent of cell aspect ratio.     

MiR-34a inhibits lymphatic metastasis potential of mouse hepatoma cells

Genetic adaptation is one of the key features of Escherichia coli (E. coli) that ensure its survival in different hostile environments. E. coli seems to initiate biofilm development in response to specific environmental cues. A number of properties inherent within bacterial biofilms indicate that their gene expression is different from that of planktonic bacteria. Two of the possible important genes are rpoS and bolA. The rpoS gene has been known as the alternative sigma (σ) factor, which controls the expression of a large number of genes, which are involved in responses to a varied number of stresses, as well as transition to stationary phase from exponential form of growth. Morphogene bolA response to stress environment leads to round morphology of E. coli cells, but little is known about its involvement in biofilms and its development or maintenance. The purpose of this study was to understand and analyse the responses of rpoS and bolA gene to sudden change in the environment. In this study, E. coli K-12 MG1655, rpoS, and bolA mutant strains were used and gene expression was studied. Results show that both genes contribute to the ability to respond and adapt in response to various types of stresses. RpoS response to various stress environments was somehow constant in both the planktonic and biofilm phases, whereas bolA responded well under various stress conditions, in both planktonic and biofilm mode, up to 5-6-fold change in the expression was noticed in the case of pH variation and hydrogen peroxide stress (H(2)O(2)) as compared with rpoS.     

Elongation correlates with nutrient deprivation in Pseudomonas aeruginosa-unsaturates biofilms

Bacteria in nature frequently grow as biofilms, yet little is known regarding how biofilm bacteria morphologically adapt to low nutrient availability, which is common in unsaturated environments such as the terrestrial subsurface or on plant leaves. For unsaturated biofilms, in which the substratum may provide all nutrients, what are the relationships between nutrition and cell size and shape-the simplest metrics of cellular morphology? To address this question, we cultured Pseudomonas aeruginosa, a ubiquitous gram-negative bacterium that is environmentally and medically important, on membranes overlaying solid media, and then measured cellular dimensions using atomic force microscopy (AFM). Nutrition was controlled chemically by media composition and physically by stacking membranes to increase the path length for nutrient diffusion. Under conditions of carbon-nitrogen imbalance, low carbon bioavailability, or increased nutrient diffusional path length, cells elongated while maintaining constant width. A mathematical relationship suggests that, by elongating, biofilm bacteria strategically enlarge their nutrient collection surface without substantially changing the ratio of surface area to volume (SA/V). We conclude that P. aeruginosa growing as unsaturated biofilm with a planar nutrient source morphologically adapt to starvation by elongating. This adaptation, if generalizable, differs from a better-understood starvation response (i.e., cell size decreases; thus SA/V in-creases) for planktonic bacteria in well-mixed environments.     

Generation of a reproducible nutrient-depleted biofilm of Escherichia coli and Burkholderia cepacia

An in vitro method of growing bacteria as a defined nutrient-depleted biofilm is proposed. The medium was defined nutritionally in terms of the quantitative composition and by the total amount of nutrient required to achieve a defined population size. Escherichia coli and Burkholderia cepacia were incubated on a filter support placed on a defined volume of solid medium. The change of biomass of the biofilm population was compared with the change in a planktonic culture. The size of the population in stationary phase was proportional to the concentration of limiting substrate up to 40 μmol cm⁻² glucose for E. coli and up to 2·7 × 10⁻⁹ mol cm⁻² iron for B. cepacia . Escherichia coli growing exponentially had a growth rate of μ = 0·30 h⁻¹ in a biofilm and μ = 0·96 h⁻¹ in planktonic culture. The growth rate, μ, for exponentially growing B. cepacia in a biofilm was 1·12 h⁻¹ and in planktonic culture 0·78 h⁻¹. This method allows the limitation of the size of a biofilm population to a chosen value.     

Biofilm susceptibility to metal toxicity

This study compared bacterial biofilm and planktonic cell susceptibility to metal toxicity by evaluating the minimum inhibitory concentration (MIC), the planktonic minimum bactericidal concentration (MBC), and minimum biofilm eradication concentration (MBEC) using the MBEC device. In total, 17 metal cations and oxyanions, chosen to represent groups VIB to VIA of the periodic table, were each tested on biofilm and planktonic cultures of Escherichia coli JM109, Staphylococcus aureus ATCC 29213, and Pseudomonas aeruginosa ATCC 27853. In contrast to control antibiotic assays, where biofilm cultures were 2 to 64 times less susceptible to killing than logarithmically growing planktonic bacteria, metal compounds killed planktonic and biofilm cultures at the same concentration in the vast majority of combinations. Our data indicate that, under the conditions reported, growth in a biofilm does not provide resistance to bacteria against killing by metal cations or oxyanions.     

Growth characteristics and expression of iron-regulated outer-membrane proteins of chemostat-grown biofilm cells of Pseudomonas aeruginosa.

An in vitro chemostat system was used to study the growth and the expression of iron-regulated outer-membrane proteins (IROMPs) by biofilm cells of Pseudomonas aeruginosa cultivated under conditions of iron limitation. The population of the planktonic cells decreased when the dilution rate was increased. At a dilution rate of 0.05 h-1, the populations of planktonic cells of both mucoid and nonmucoid P. aeruginosa were 3 x 10(9) cells/mL. This value dropped to 5 x 10(6) cells/mL when the dilution rate was increased to 1.0 h-1. The reverse was observed for the biofilm cells. The number of biofilm cells colonising the silicone tubing increased when the dilution rate was increased. The number of biofilm cells of the mucoid strain at steady state was 2 x 10(8) cells/cm (length) when the dilution rate was fixed at 0.05 h-1. The figure increased to 8 x 10(9) cells/cm when the dilution rate was increased to 1.0 h-1. The population of biofilm cells of the nonmucoid strain was 9 x 10(7) cells/cm (length) when the dilution rate was 0.05 h-1. It increased to 2 x 10(9) cells/cm when the dilution rate was set at 1.0 h-1. The expression of IROMPs was induced in the biofilm cells of both mucoid and nonmucoid strains when the dilution rates were 0.05 and 0.2 h-1. IROMPs were reduced but still detectable at the dilution rate of 0.5 h-1. However, the expression of IROMPs was repressed when the dilution rate was increased to 1.0 h-1. The data suggest that the biofilm cells of P. aeruginosa switch on the expression of IROMPs to assist iron acquisition when the dilution rate used for the chemostat run is below 0.5 h-1. The high affinity iron uptake system is not required by the biofilm cells when the dilution rate is increased because the trace amount of iron present in the chemostat is sufficient for the growth of adherent biofilm cells.     

Embedded Biofilm,a New Biofilm Model Based on the Embedded Growth of Bacteria

A variety of systems have been developed to study biofilm formation. However, most systems are based on the surface-attached growth of microbes under shear stress. In this study, we designed a microfluidic channel device, called a microfluidic agarose channel (MAC), and found that microbial cells in the MAC system formed an embedded cell aggregative structure (ECAS). ECASs were generated from the embedded growth of bacterial cells in an agarose matrix and better mimicked the clinical environment of biofilms formed within mucus or host tissue under shear-free conditions. ECASs were developed with the production of extracellular polymeric substances (EPS), the most important feature of biofilms, and eventually burst to release planktonic cells, which resembles the full developmental cycle of biofilms. Chemical and genetic effects have also confirmed that ECASs are a type of biofilm. Unlike the conventional biofilms formed in the flow cell model system, this embedded-type biofilm completes the developmental cycle in only 9 to 12 h and can easily be observed with ordinary microscopes. We suggest that ECASs are a type of biofilm and that the MAC is a system for observing biofilm formation.     

Design of a side-view particle imaging velocimetry flow system for cell-substrate adhesion studies

Experimental models that mimic the flow conditions in microcapillaries have suggested that the local shear stresses and shear rates can mediate tumor cell and leukocyte arrest on the endothelium and subsequent sustained adhesion. However, further investigation has been limited by the lack of experimental models that allow quantitative measurement of the hydrodynamic environment over adherent cells. The purpose of this study was to develop a system capable of acquiring quantitative flow profiles over adherent cells. By combining the techniques of side-view imaging and particle image velocimetry (PIV), an in vitro model was constructed that is capable of obtaining quantitative flow data over cells adhering to the endothelium. The velocity over an adherent leukocyte was measured and the shear rate was calculated under low and high upstream wall shear. The microcapillary channel was modeled using computational fluid dynamics (CFD) and the calculated velocity profiles over cells under the low and high shear rates were compared to experimental results. The drag force applied to each cell by the fluid was then computed. This system provides a means for future study of the forces underlying adhesion by permitting characterization of the local hydrodynamic conditions over adherent cells.     

Influence of hydrodynamics and nutrients on biofilm structure

Hydrodynamic conditions control two interlinked parameters; mass transfer and drag, and will, therefore, significantly influence many of the processes involved in biofilm development. The goal of this research was to determine the effect of flow velocity and nutrients on biofilm structure. Biofilms were grown in square glass capillary flow cells under laminar and turbulent flows. Biofilms were observed microscopically under flow conditions using image analysis. Mixed species bacterial biofilms were grown with glucose (40 mg/l) as the limiting nutrient. Biofilms grown under laminar conditions were patchy and consisted of roughly circular cell clusters separated by interstitial voids. Biofilms in the turbulent flow cell were also patchy but these biofilms consisted of patches of ripples and elongated 'streamers' which oscillated in the flow. To assess the influence of changing nutrient conditions on biofilm structure the glucose concentration was increased from 40 to 400 mg/l on an established 21 day old biofilm growing in turbulent flow. The cell clusters grew rapidly and the thickness of the biofilm increased from 30 μ to 130 μ within 17 h. The ripples disappeared after 10 hours. After 5 d the glucose concentration was reduced back to 40 mg/l. There was a loss of biomass and patches of ripples were re-established within a further 2 d.     

The influence of flow cell geometry related shear stresses on the distribution,structure and susceptibility of Pseudomonas aeruginosa 01 biofilms

The effects of non-uniform hydrodynamic conditions resulting from flow cell geometry (square and rectangular cross-section) on Pseudomonas aeruginosa 01 (PAO1) biofilm formation, location, and structure were investigated for nominally similar flow conditions using a combination of confocal scanning laser microscope (CSLM) and computational fluid dynamics (CFD). The thickness and surface coverage of PAO1 biofilms were observed to vary depending on the location in the flow cell and thus also the local wall shear stress. The biofilm structure in a 5:1 (width to height) aspect ratio rectangular flow cell was observed to consist mainly of a layer of bacterial cells with thicker biofilm formation observed in the flow cell corners. For square cross-section (1:1 aspect ratio) flow cells, generally thicker and more uniform surface coverage biofilms were observed. Mushroom shaped structures with hollow centers and wall breaks, indicative of ‘seeding’ dispersal structures, were found exclusively in the square cross-section tubes. Exposure of PAO1 biofilms grown in the flow cells to gentamicin revealed a difference in susceptibility. Biofilms grown in the rectangular flow cell overall exhibited a greater susceptibility to gentamicin compared to those grown in square flow cells. However, even within a given flow cell, differences in susceptibility were observed depending on location. This study demonstrates that the spanwise shear stress distribution within the flow cells has an important impact on the location of colonization and structure of the resultant biofilm. These differences in biofilm structure have a significant impact on the susceptibility of the biofilms grown within flow channels. The impact of flow modification due to flow cell geometry should be considered when designing flow cells for laboratory investigation of bacterial biofilms.