Development and Application of a New Method for Specific and Sensitive Enumeration of Spores of Nonproteolytic Clostridium botulinum Types B,E, and F in Foods and Food Materials

The highly potent botulinum neurotoxins are responsible for botulism, a severe neuroparalytic disease. Strains of nonproteolytic Clostridium botulinum form neurotoxins of types B, E, and F and are the main hazard associated with minimally heated refrigerated foods. Recent developments in quantitative microbiological risk assessment (QMRA) and food safety objectives (FSO) have made food safety more quantitative and include, as inputs, probability distributions for the contamination of food materials and foods. A new method that combines a selective enrichment culture with multiplex PCR has been developed and validated to enumerate specifically the spores of nonproteolytic C. botulinum. Key features of this new method include the following: (i) it is specific for nonproteolytic C. botulinum (and does not detect proteolytic C. botulinum), (ii) the detection limit has been determined for each food tested (using carefully structured control samples), and (iii) a low detection limit has been achieved by the use of selective enrichment and large test samples. The method has been used to enumerate spores of nonproteolytic C. botulinum in 637 samples of 19 food materials included in pasta-based minimally heated refrigerated foods and in 7 complete foods. A total of 32 samples (5 egg pastas and 27 scallops) contained spores of nonproteolytic C. botulinum type B or F. The majority of samples contained <100 spores/kg, but one sample of scallops contained 444 spores/kg. Nonproteolytic C. botulinum type E was not detected. Importantly, for QMRA and FSO, the construction of probability distributions will enable the frequency of packs containing particular levels of contamination to be determined.Food-borne botulism is a severe and deadly intoxication caused by the consumption of food containing as little as 30 to 100 ng of preformed botulinum neurotoxin (45). More than 2,500 cases of botulism were reported in Europe in 1999 and 2000, with the majority of cases in the east of the continent (44). Currently, 25 to 50 food-borne botulism cases are diagnosed annually in the United States (27). There are seven distinct botulinum neurotoxins (types A to G) and a number of subtypes (6, 26, 45). In view of the potency of the botulinum neurotoxin and the severity of botulism, four phylogenetically distinct bacteria are grouped together as the Clostridium botulinum species, solely on the basis of their ability to form botulinum neurotoxin. The divergence between these four distinct bacteria is strong enough to merit their classification as distinct species and in some cases is significantly greater than that between bacteria belonging to different genera, e.g., Bacillus subtilis and Staphylococcus aureus (7). Two of these bacteria (proteolytic C. botulinum and nonproteolytic C. botulinum) are responsible for the majority of cases of food-borne botulism. Strains of proteolytic C. botulinum produce neurotoxins of type A, B, or F, form spores of high heat resistance, and have a minimum growth temperature of approximately 12°C (39). Strains of nonproteolytic C. botulinum produce neurotoxins of type B, E, or F, form spores of moderate heat resistance, and are able to grow and form toxin at 3°C (18, 48) and are recognized as the major hazard associated with minimally heated refrigerated foods (4, 37, 43, 44, 48). These new foods meet consumer demand for high-quality, convenient foods that are low in preservatives, and sales are presently increasing by about 10% per annum in many countries (3, 47).Quantitative microbiological risk assessment (QMRA) is now established as an important microbiology food safety tool (42). Process risk models have been used to assess the safety of specific foods with respect to nonproteolytic C. botulinum and the food-borne botulism hazard (e.g., 2, 41). These process risk models benefit from high-quality information, including that on the incidence of spores of nonproteolytic C. botulinum spores in food materials. The implementation of food safety objectives (FSO) also benefits from the availability of high-quality information on the microbial contamination of foods and food materials (24). This information is most effective in the form of probability distributions rather than as average spore concentrations or other statistics.The difficulty with enumerating nonproteolytic C. botulinum in foods is that there is no effective selective culture medium available. Surveys of the extent of contamination of foods and food materials have used a nonselective enrichment followed by either testing for neurotoxin using a mouse test or enzyme-linked immunosorbent assay (ELISA) or testing for the presence of neurotoxin genes using a PCR test (3, 10, 13, 35, 38, 39). This approach, however, is not optimized for nonproteolytic C. botulinum or proteolytic C. botulinum (therefore potentially failing to recover all spores of either organism) and may also not distinguish nonproteolytic C. botulinum from proteolytic C. botulinum. Heating at 80°C for 10 min followed by incubation at 35°C (54) may be reasonably selective for proteolytic C. botulinum, but there is no similar approach for nonproteolytic C. botulinum, although incubation at 28°C (54) may offer an element of selection. It is necessary, therefore, to develop a method to enumerate spores of nonproteolytic C. botulinum in food materials that is robust and optimized, as well as sensitive and specific for this particular pathogen (and does not also detect proteolytic C. botulinum). When enumerating bacteria in foods, it is essential to demonstrate the efficiency of the method by verifying that small concentrations (in the present study, spores of nonproteolytic C. botulinum) can be detected following addition to test samples.This paper describes the development, validation, and application of a new method to enumerate spores of nonproteolytic C. botulinum in foods and in food materials. This method has been designed to generate data for the construction of probability distributions that can be used in QMRA and FSO settings. Most of the effort has been dedicated to the development and evaluation of the enrichment procedure rather than the PCR test, as the PCR test has received much attention from others (e.g., 3, 10, 16, 36, 38). A low-temperature selective-enrichment procedure is described that has been optimized specifically for nonproteolytic C. botulinum over proteolytic C. botulinum and other bacteria. In order to detect low concentrations of spores, large quantities (200 g) of food materials and foods have been tested. Specific detection of neurotoxin genes is achieved by the use of an established multiplex PCR (36), with an internal amplification control now included (25). By the use of a set of control samples inoculated with defined concentrations of spores of nonproteolytic C. botulinum, the detection limit has been estimated for each food material and food tested. The method has been used in an extensive survey of raw materials intended for use in pasta ready meals, as well as the final meals themselves. The implications for risk assessment and risk management of chilled foods are discussed.     

Development of a Combined Selection and Enrichment PCR Procedure for Clostridium botulinum Types B, E, and F and Its Use To Determine Prevalence in Fecal Samples from Slaughtered Pigs

A specific and sensitive combined selection and enrichment PCR procedure was developed for the detection of Clostridium botulinum types B, E, and F in fecal samples from slaughtered pigs. Two enrichment PCR assays, using the DNA polymerase rTth, were constructed. One assay was specific for the type B neurotoxin gene, and the other assay was specific for the type E and F neurotoxin genes. Based on examination of 29 strains of C. botulinum, 16 strains of other Clostridium spp., and 48 non-Clostridium strains, it was concluded that the two PCR assays detect C. botulinum types B, E, and F specifically. Sample preparation prior to the PCR was based on heat treatment of feces homogenate at 70°C for 10 min, enrichment in tryptone-peptone-glucose-yeast extract broth at 30°C for 18 h, and DNA extraction. The detection limits after sample preparation were established as being 10 spores per g of fecal sample for nonproteolytic type B, and 3.0 × 10³ spores per g of fecal sample for type E and nonproteolytic type F with a detection probability of 95%. Seventy-eight pig fecal samples collected from slaughter houses were analyzed according to the combined selection and enrichment PCR procedure, and 62% were found to be PCR positive with respect to the type B neurotoxin gene. No samples were positive regarding the type E and F neurotoxin genes, indicating a prevalence of less than 1.3%. Thirty-four (71%) of the positive fecal samples had a spore load of less than 4 spores per g. Statistical analysis showed that both rearing conditions (outdoors and indoors) and seasonal variation (summer and winter) had significant effects on the prevalence of C. botulinum type B, whereas the effects of geographical location (southern and central Sweden) were less significant.     

Multiplex PCR Assay for Detection and Identification of Clostridium botulinum Types A, B, E, and F in Food and Fecal Material

Botulism is diagnosed by detecting botulinum neurotoxin and Clostridium botulinum cells in the patient and in suspected food samples. In this study, a multiplex PCR assay for the detection of Clostridium botulinum types A, B, E, and F in food and fecal material was developed. The method employs four new primer pairs with equal melting temperatures, each being specific to botulinum neurotoxin gene type A, B, E, or F, and enables a simultaneous detection of the four serotypes. A total of 43 C. botulinum strains and 18 strains of other bacterial species were tested. DNA amplification fragments of 782 bp for C. botulinum type A alone, 205 bp for type B alone, 389 bp for type E alone, and 543 bp for type F alone were obtained. Other bacterial species, including C. sporogenes and the nontoxigenic nonproteolytic C. botulinum-like organisms, did not yield a PCR product. Sensitivity of the PCR for types A, E, and F was 10² cells and for type B was 10 cells per reaction mixture. With a two-step enrichment, the detection limit in food and fecal samples varied from 10⁻² spore/g for types A, B, and F to 10⁻¹ spore/g of sample material for type E. Of 72 natural food samples investigated, two were shown to contain C. botulinum type A, two contained type B, and one contained type E. The assay is sensitive and specific and provides a marked improvement in the PCR diagnostics of C. botulinum.     

High-Pressure-Mediated Survival of Clostridium botulinum and Bacillus amyloliquefaciens Endospores at High Temperature

Endospores of proteolytic type B Clostridium botulinum TMW 2.357 and Bacillus amyloliquefaciens TMW 2.479 are currently described as the most high-pressure-resistant bacterial spores relevant to food intoxication and spoilage in combined pressure-temperature applications. The effects of combined pressure (0.1 to 1,400 MPa) and temperature (70 to 120°C) treatments were determined for these spores. A process employing isothermal holding times was established to distinguish pressure from temperature effects. An increase in pressure (600 to 1,400 MPa) and an increase in temperature (90 to 110°C) accelerated the inactivation of C. botulinum spores. However, incubation at 100°C, 110°C, or 120°C with ambient pressure resulted in faster spore reduction than treatment with 600 or 800 MPa at the same temperature. This pressure-mediated spore protection was also observed at 120°C and 800, 1,000, or 1,200 MPa with the more heat-tolerant B. amyloliquefaciens TMW 2.479 spores. Inactivation curves for both strains showed a pronounced pressure-dependent tailing, which indicates that a small fraction of the spore populations survives conditions of up to 120°C and 1.4 GPa in isothermal treatments. Because of this tailing and the fact that pressure-temperature combinations stabilizing bacterial endospores vary from strain to strain, food safety must be ensured in case-by-case studies demonstrating inactivation or nongrowth of C. botulinum with realistic contamination rates in the respective pressurized food and equipment.     

Heterogeneity of Times Required for Germination and Outgrowth from Single Spores of Nonproteolytic Clostridium botulinum

Knowledge of the distribution of growth times from individual spores and quantification of this biovariability are important if predictions of growth in food are to be improved, particularly when, as for Clostridium botulinum, growth is likely to initiate from low numbers of spores. In this study we made a novel attempt to determine the distributions of times associated with the various stages of germination and subsequent growth from spores and the relationships between these stages. The time to germination (t_germ), time to emergence (t_emerg), and times to reach the lengths of one (t_C1) and two (t_C2) mature cells were quantified for individual spores of nonproteolytic C. botulinum Eklund 17B using phase-contrast microscopy and image analysis. The times to detection for wells inoculated with individual spores were recorded using a Bioscreen C automated turbidity reader and were compatible with the data obtained microscopically. The distributions of times to events during germination and subsequent growth showed considerable variability, and all stages contributed to the overall variability in the lag time. The times for germination (t_germ), emergence (t_emerg − t_germ), cell maturation (t_C1 − t_emerg), and doubling (t_C2 − t_C1) were not found to be correlated. Consequently, it was not possible to predict the total duration of the lag phase from information for just one of the stages, such as germination. As the variability in postgermination stages is relatively large, the first spore to germinate will not necessarily be the first spore to produce actively dividing cells and start neurotoxin production. This information can make a substantial contribution to improved predictive modeling and better quantitative microbiological risk assessment.     

Thermal Inactivation of Nonproteolytic Clostridium botulinum Type E Spores in Model Fish Media and in Vacuum-Packaged Hot-Smoked Fish Products

Thermal inactivation of nonproteolytic Clostridium botulinum type E spores was investigated in rainbow trout and whitefish media at 75 to 93°C. Lysozyme was applied in the recovery of spores, yielding biphasic thermal destruction curves. Approximately 0.1% of the spores were permeable to lysozyme, showing an increased measured heat resistance. Decimal reduction times for the heat-resistant spore fraction in rainbow trout medium were 255, 98, and 4.2 min at 75, 85, and 93°C, respectively, and those in whitefish medium were 55 and 7.1 min at 81 and 90°C, respectively. The z values were 10.4°C in trout medium and 10.1°C in whitefish medium. Commercial hot-smoking processes employed in five Finnish fish-smoking companies provided reduction in the numbers of spores of nonproteolytic C. botulinum of less than 10³. An inoculated-pack study revealed that a time-temperature combination of 42 min at 85°C (fish surface temperature) with >70% relative humidity (RH) prevented growth from 10⁶ spores in vacuum-packaged hot-smoked rainbow trout fillets and whole whitefish stored for 5 weeks at 8°C. In Finland it is recommended that hot-smoked fish be stored at or below 3°C, further extending product safety. However, heating whitefish for 44 min at 85°C with 10% RH resulted in growth and toxicity in 5 weeks at 8°C. Moist heat thus enhanced spore thermal inactivation and is essential to an effective process. The sensory qualities of safely processed and more lightly processed whitefish were similar, while differences between the sensory qualities of safely processed and lightly processes rainbow trout were observed.     

Contrasting Effects of Heat Treatment and Incubation Temperature on Germination and Outgrowth of Individual Spores of Nonproteolytic Clostridium botulinum Bacteria

In this study, we determined the effects of incubation temperature and prior heat treatment on the lag-phase kinetics of individual spores of nonproteolytic Clostridium botulinum Eklund 17B. The times to germination (t_germ), one mature cell (t_C1), and two mature cells (t_C2) were measured for individual unheated spores incubated at 8, 10, 15, or 22°C and used to calculate the t_germ, the outgrowth time (t_C1 − t_germ), and the first doubling time (t_C2 − t_C1). Measurements were also made at 22°C of spores that had previously been heated at 80°C for 20 s. For unheated spores, outgrowth made a greater contribution to the duration and variability of the lag phase than germination. Decreasing incubation temperature affected germination less than outgrowth; thus, the proportion of lag associated with germination was less at lower incubation temperatures. Heat treatment at 80°C for 20 s increased the median germination time of surviving spores 16-fold and greatly increased the variability of spore germination times. The shape of the lag-time (t_C1) and outgrowth (t_C1 − t_germ) distributions were the same for unheated spores, but heat treatment altered the shape of the lag-time distribution, so it was no longer homogeneous with the outgrowth distribution. Although heat treatment mainly extended germination, there is also evidence of damage to systems required for outgrowth. However, this damage was quickly repaired and was not evident by the time the cells started to double. The results presented here combined with previous findings show that the stage of lag most affected, and the extent of any effect in terms of duration or variability, differs with both historical treatment and the growth conditions.Clostridium botulinum is a group of four physiologically and phylogenetically distinct anaerobic spore-forming bacteria (known as groups I, II, III, and IV) that produce the highly toxic botulinum neurotoxin (12). The severity of the intoxication, botulism, ensures considerable effort is directed at preventing the growth of this pathogen in food. Nonproteolytic (group II) C. botulinum is one of the two groups most frequently associated with food-borne botulism. It forms heat-resistant spores and can germinate, grow, and produce toxin at 3°C (8); thus, nonproteolytic C. botulinum is a particular concern in mild heat-treated chilled foods (16, 17).Spores formed by pathogens such as C. botulinum are a significant food safety issue since they are able to resist many of the processes, such as cooking, used to kill vegetative cells. Understanding the transformation from a dormant spore to active vegetative cells is an important part of quantifying the risk associated with such organisms. Considerable effort has been targeted at measuring and relating the kinetic responses of populations of C. botulinum to environmental conditions and such data have been used to create predictive models, for example, ComBase (www.combase.cc). Such approaches have made a considerable contribution to ensuring food safety but problems with using population based predictions may arise when an initial inoculum is very small or additional information beyond point values is required. Spores typically contaminate foods at low concentrations so that growth of C. botulinum, when it occurs, is likely to initiate from just a few spores. In these circumstances the distribution of times to growth in packs will reflect the heterogeneity of times to growth from the contaminating individual spores. There is an intrinsic variability between individual spores within a population, and the relationship between population lag and individual lag is complex. Consequently, individual lag times cannot be predicted from population measurements (3). Knowledge of the underlying distribution would allow greater refinement of risk assessments.The lag period between a spore being exposed to conditions suitable for growth and the start of exponential growth will reflect the combined times of germination, emergence, elongation, and first cell division. Currently, very little is known about the variability and duration of these stages and any relationships between them. Measuring the kinetics of spore germination is usually achieved by measuring a population to identify time to percent completion. Such germination curves represent the summation of responses by individual spores. Some authors have measured the biovariability associated with individual spores, but most studies have examined only germination (4-7, 11, 22) and not subsequent outgrowth. More recently, we have used phase-contrast microscopy and image analysis to follow individual spores of nonproteolytic C. botulinum from dormancy, through germination and emergence, to cell division (21, 23). These experiments showed there is very little, or no, relationship between the time spent in each stage by individual spores. We have now extended this work to determine distributions of times for different stages in lag phase as affected by heat treatment and incubation temperature.     

Functional Characterisation of Germinant Receptors in Clostridium botulinum and Clostridium sporogenes Presents Novel Insights into Spore Germination Systems

Clostridium botulinum is a dangerous pathogen that forms the highly potent botulinum toxin, which when ingested causes a deadly neuroparalytic disease. The closely related Clostridium sporogenes is occasionally pathogenic, frequently associated with food spoilage and regarded as the non-toxigenic equivalent of Group I C. botulinum. Both species form highly resistant spores that are ubiquitous in the environment and which, under favourable growth conditions germinate to produce vegetative cells. To improve the control of botulinum neurotoxin-forming clostridia, it is imperative to comprehend the mechanisms by which spores germinate. Germination is initiated following the recognition of small molecules (germinants) by a specific germinant receptor (GR) located in the spore inner membrane. The present study precisely defines clostridial GRs, germinants and co-germinants. Group I C. botulinum ATCC3502 contains two tricistronic and one pentacistronic GR operons, while C. sporogenes ATCC15579 has three tricistronic and one tetracistronic GR operons. Insertional knockout mutants, allied with characterisation of recombinant GRs shows for the first time that amino acid stimulated germination in C. botulinum requires two tri-cistronic encoded GRs which act in synergy and cannot function individually. Spore germination in C. sporogenes requires one tri-cistronic GR. Two other GRs form part of a complex involved in controlling the rate of amino-acid stimulated germination. The suitability of using C. sporogenes as a substitute for C. botulinum in germination studies and food challenge tests is discussed.     

Detection of Type A, B, E, and F Clostridium botulinum Neurotoxins in Foods by Using an Amplified Enzyme-Linked Immunosorbent Assay with Digoxigenin-Labeled Antibodies

An amplified enzyme-linked immunosorbent assay (ELISA) for the detection of Clostridium botulinum complex neurotoxins was evaluated for its ability to detect these toxins in food. The assay was found to be suitable for detecting type A, B, E, and F botulinum neurotoxins in a variety of food matrices representing liquids, solid, and semisolid food. Specific foods included broccoli, orange juice, bottled water, cola soft drinks, vanilla extract, oregano, potato salad, apple juice, meat products, and dairy foods. The detection sensitivity of the test for these botulinum complex serotypes was found to be 60 pg/ml (1.9 50% lethal dose [LD₅₀]) for botulinum neurotoxin type A (BoNT/A), 176 pg/ml (1.58 LD₅₀) for BoNT/B, 163 pg/ml for BoNT/E (4.5 LD₅₀), and 117 pg/ml for BoNT/F (less than 1 LD₅₀) in casein buffer. The test could also readily detect 2 ng/ml of neurotoxins type A, B, E, and F in a variety of food samples. For specificity studies, the assay was also used to test a large panel of type A C. botulinum, a smaller panel of proteolytic and nonproteolytic type B, E, and F neurotoxin-producing Clostridia, and nontoxigenic organisms using an overnight incubation of toxin production medium. The assay appears to be an effective tool for large-scale screening of the food supply in the event of a botulinum neurotoxin contamination event.     

Hydrogen gas accelerates thermal inactivation ofClostridium botulinum 113B spores

Summary Heat inactivation ofClostridium botulinum spores was accelerated in atmospheres containing hydrogen gas. Hydrogen gas also moderately increased the thermal destruction ofBacillus spores. Hydrogen gas may react with components inC. botulinum spores such as transition metals producing hydrogen ions or hydrides, which destroy essential spore components. Thermal processing in modified atmospheres may have applications in food processing and in sterilization of medical supplies.     

Growth from Spores of Nonproteolytic Clostridium botulinum in Heat-Treated Vegetable Juice

Unheated spores of nonproteolytic Clostridium botulinum were able to lead to growth in sterile deoxygenated turnip, spring green, helda bean, broccoli, or potato juice, although the probability of growth was low and the time to growth was longer than the time to growth in culture media. With all five vegetable juices tested, the probability of growth increased when spores were inoculated into the juice and then heated for 2 min in a water bath at 80°C. The probability of growth was greater in bean or broccoli juice than in culture media following 10 min of heat treatment in these media. Growth was prevented by heat treatment of spores in vegetable juices or culture media at 80°C for 100 min. We show for the first time that adding heat-treated vegetable juice to culture media can increase the number of heat-damaged spores of C. botulinum that can lead to colony formation.     

Immunomagnetic detection of Bacillus stearothermophilus spores in food and environmental samples.

There are currently no methods for the rapid and sensitive detection of bacterial spores that could be used to direct raw materials containing high spore loads away from products that pose a food safety risk. Existing methods require an overnight incubation, cannot detect spores below 10(5) CFU/ml, or are not specific to particular species. This work describes a method to specifically detect < 10(4) CFU of bacterial spores per ml within 2 h. Polyclonal antibodies to Bacillus stearothermophilus spores were attached to 2.8-micron-diameter magnetic polystyrene beads by using a polythreonine cross-linker via the antibody carbohydrate moiety. A biotin-avidin-amplified sandwich enzyme-linked immunosorbent assay coupled to a fluorescent substrate was used to quantitate captured spores. The concentration of B. stearothermophilus spores in samples was linearly correlated to fluorescent activity (r2 = 0.99) with a lower detection limit of 8 x 10(3) CFU/ml and an upper detection limit of 8 x 10(5) CFU/ml. The detection limits are not fixed and can be changed by varying the immunomagnetic bead concentration. Several food and environmental samples were tested to demonstrate the versatility of the assay.     

Applications of nonthermal plasma technology on safety and quality of dried food ingredients

Cold plasma technology is an efficient, environmental-friendly, economic and noninvasive technology; and in recent years these advantages placed this novel technology at the centre of diverse studies for food industry applications. Dried food ingredients including spices, herbs, powders and seeds are an important part of the human diet; and the growing demands of consumers for higher quality and safe food products have led to increased research into alternative decontamination methods. Numerous studies have investigated the effect of nonthermal plasma on dried food ingredients for food safety and quality purposes. This review provides critical review on potential of cold plasma for disinfection of dried food surfaces (spices, herbs and seeds), improvement of functional and rheological properties of dried ingredients (powders, proteins and starches). The review further highlights the benefits of plasma treatment for enhancement of seeds performance and germination yield which could be applied in agricultural sector in near future. Different studies applying plasma technology for control of pathogens and spoilage micro-organisms and modification of food quality and germination of dried food products followed by benefits and current challenges are presented. However, more systemic research needs to be addressed for successful adoption of this technology in food industry.     

PCR Detection of Thermophilic Spore-Forming Bacteria Involved in Canned Food Spoilage

Thermophilic bacteria that form highly heat-resistant spores constitute an important group of spoilage bacteria of low-acid canned food. A PCR assay was developed in order to rapidly trace these bacteria. Three PCR primer pairs were designed from rRNA gene sequences. These primers were evaluated for the specificity and the sensitivity of detection. Two primer pairs allowed detection at the species level of Geobacillus stearothermophilus and Moorella thermoacetica/thermoautrophica. The other pair allowed group-specific detection of anaerobic thermophilic bacteria of the genera Thermoanaerobacterium, Thermoanaerobacter, Caldanerobium and Caldanaerobacter. After a single enrichment step, these PCR assays allowed the detection of 28 thermophiles from 34 cans of spoiled low-acid food. In addition, 13 ingredients were screened for the presence of these bacteria. This PCR assay serves as a detection method for strains able to spoil low-acid canned food treated at 55°C. It will lead to better reactivity in the canning industry. Raw materials and ingredients might be qualified not only for quantitative spore contamination, but also for qualitative contamination by highly heat-resistant spores.     

Historical and Contemporary NaCl Concentrations Affect the Duration and Distribution of Lag Times from Individual Spores of Nonproteolytic Clostridium botulinum

In this study we determined the effect of NaCl concentration during sporulation (0 or 3.0% [wt/vol] added NaCl) and subsequent growth (0 or 2.0% [wt/vol] added NaCl) on the distributions of times associated with various stages of the lag phase of individual spores of nonproteolytic Clostridium botulinum strain Eklund 17B. The effects of NaCl on the probability of germination and the probability of subsequent growth were also determined. Spore populations exhibited considerable heterogeneity at all stages of lag phase for each condition tested. Germination time did not correlate strongly with the times for later stages in the lag phase, such as outgrowth and doubling time. Addition of NaCl to either the sporulation or growth media increased the mean times for, and variability of, all the measured stages of the lag phase (germination, emergence, time to one mature cell, and time to first doubling). There was a synergistic interaction between the inhibitory effects of NaCl in the sporulation medium and the inhibitory effects of NaCl in the subsequent growth medium on the total lag time and each of its stages. Addition of NaCl to either the sporulation medium or the growth medium reduced both the probability of germination and the probability of a germinated spore developing into a mature cell, but the interaction was not synergistic. Spores formed in medium with added NaCl were not better adapted to subsequent growth in suboptimal osmotic conditions than spores formed in medium with no added NaCl were. Knowledge of the distribution of lag times for individual spores and quantification of the biovariability within lag time distributions may provide insight into the underlying mechanisms and can be used to improve predictions of growth in food and to refine risk assessments.     

Quantification of factors affecting the probability of development of pathogenic bacteria,in particularClostridium botulinum,in foods

Summary The success of a preservation method with respect toClostridium botulinum can be measured by its effect on the probability that a single spore would result in growth and formation of toxin. In canned, low-acid foods, the minimum heat-process is designed to reduce the probability of survival of a single, heat-resistant spore ofC. botulinum by a factor of 10¹². In some foods, safety depends on the combination of inactivation and inhibition ofC. botulinum. The degree of protection (Pr) can be expressed asPr=Ds+In, whereDs is the decimal destruction of spores ofC. botulinum andIn is the decimal inhibition. A similar approach can be used in the case of other bacteria.Pr=log 1/P, whereP=the probability that an individual spore or bacterium will survive and result in growth.P can be estimated as the number of spores or bacteria that survive and initiate growth in a culture medium or food divided by the number of viable spores or bacteria inoculated into the medium or food. The effects of combinations of preservative factors can be measured by their effect onP at a stated temperature for a stated time. In experiments to determine the effects of preservative factors on an anaerobic bacterium such asC. botulinum it is essential that oxygen should be eliminated, unless it is controlled as an inhibitory factor. Thus experiments in culture media should be done under strictly anaerobic conditions at a known, low redox potential. The results of experiments to determine the effects of preservative factors onP after a series of incubation times can be modeled by methods similar to those used to model the effect of preservative factors on rate of growth and on lag period. Experiments to determine the effect of preservative factors on the probability of growth from a single spore or bacterium ofC. botulinum are discussed. A few reports of similar experiments with other bacteria have been published and are described. This approach has the advantage that it takes account of the inoculum level of bacteria.Mention of brand of firm names does not constitute an endorsement by the US Department of Agriculture over others of a similar nature not mentioned.     

Gas discharge plasmas are effective in inactivating <Emphasis Type="Italic">Bacillus</Emphasis> and <Emphasis Type="Italic">Clostridium</Emphasis> spores

Bacterial spores are the most resistant form of life and have been a major threat to public health and food safety. Nonthermal atmospheric gas discharge plasma is a novel sterilization method that leaves no chemical residue. In our study, a helium radio-frequency cold plasma jet was used to examine its sporicidal effect on selected strains of Bacillus and Clostridium. The species tested included Bacillus subtilis, Bacillus stearothermophilus, Clostridium sporogenes, Clostridium perfringens, Clostridium difficile, and Clostridium botulinum type A and type E. The plasmas were effective in inactivating selected Bacillus and Clostridia spores with D values (decimal reduction time) ranging from 2 to 8 min. Among all spores tested, C. botulinum type A and C. sporogenes were significantly more resistant to plasma inactivation than other species. Observations by phase contrast microscopy showed that B. subtilis spores were severely damaged by plasmas and the majority of the treated spores were unable to initiate the germination process. There was no detectable fragmentation of the DNA when the spores were treated for up to 20 min. The release of dipicolinic acid was observed almost immediately after the plasma treatment, indicating the spore envelope damage could occur quickly resulting in dipicolinic acid release and the reduction of spore resistance.     

The effect of food on microparasite transmission in the waterflea Daphnia magna

Studies on dynamics of trophic transmission usually refer to the predation of animals that contain parasites. Here, in contrast, I study the transmission of external stages of parasites namely of spores of the microsporidian gut parasites Glugoides intestinalis and Micro1. These spores are filter fed by the waterflea Daphnia magna and I was particularly interested in the effect of food on transmission success. It was hypothesized that food has a double impact on transmission success because of increased spore uptake on the one hand and increased spore defecation of infected waterfleas on the other. I tested for these assumed food effects in exposure experiments where transmission could occur naturally from infected to uninfected waterfleas in the presence or absence of food.
The major assumptions were confirmed. In one system transmission success was increased fourfold in the presence of food and feeding infected hosts had lower spore loads. The other system showed evidence for these effects. Feeding activity correlated positively with food in both systems and spore loads in infected waterfleas partially determined spore loads in exposed waterfleas.
I discuss the impact of food on infected and uninfected waterfleas in particular and on transmission success and epidemiology in general.     

Survival of Clostridium botulinum Spores

Radiation survival curves of spores of Clostridium botulinum strain 33A exhibited an exponential reduction which accounted for most of the population, followed by a “tail” comprising a very small residual number [7 to 0.7 spore(s) per ml] which resisted death in the range between 3.0 and 9.0 Mrad dose levels. The “tail” was not caused by protective spore substances released into the suspensions during irradiation, by the presence of accumulated radiation “inactivated” spores, or by heat shock of pre-irradiated spores. The theoretical number of spore targets which must be inactivated by irradiation was estimated both by a graphical and by a computation method to be about 80, and the D value was calculated to be 0.295 and 0.396 Mrad, respectively, in buffer and in pork pea broth.     

Incidence and Diversity of Potentially Highly Heat-Resistant Spores Isolated at Dairy Farms

The presence of highly heat-resistant spores of Bacillus sporothermodurans in ultrahigh-temperature or sterilized consumer milk has emerged as an important item in the dairy industry. Their presence is considered undesirable since they hamper the achievement of commercial sterility requirements. By using a selective 30-min heat treatment at 100°C, 17 Belgian dairy farms were screened to evaluate the presence, sources, and nature of potentially highly heat-resistant spores in raw milk. High numbers of these spores were detected in the filter cloth of the milking equipment and in green crop and fodder samples. About 700 strains were isolated after the selective heating, of which 635 could be screened by fatty acid methyl ester analysis. Representative strains were subjected to amplified ribosomal DNA restriction analysis, 16S rRNA gene sequencing, percent G+C content, and DNA-DNA reassociations for further identification. The strain collection showed a remarkable diversity, with representatives of seven aerobic spore-forming genera. Bacillus licheniformis and Bacillus pallidus were the most predominant species overall. Twenty-three percent of the 603 spore-forming isolates proved to belong to 18 separate novel species. These findings suggest that the selective heating revealed a pool of unknown organisms with a higher heat-resistant character. This study showed that high spore counts can occur at the dairy farm and that feed and milking equipment can act as reservoirs or entry points for potentially highly heat-resistant spores into raw milk. Lowering this spore load by good hygienic measures could probably further reduce the contamination level of raw milk, in this way minimizing the aerobic spore-forming bacteria that could lead to spoilage of milk and dairy products. Assessment and characterization of this particular flora are of great importance to allow the dairy or food industry to adequately deal with newly arising microbiological problems.