Localization of a cryptic binding site for tenascin on fibronectin

Fibronectin and tenascin are large extracellular matrix proteins that interact with each other and with integrin receptors to regulate cell growth and movement. They are both modular proteins composed of independently folded domains (modules) that are arranged in linear fashion. Fibronectin is a covalent dimer and tenascin is a hexamer. The site on tenascin to which fibronectin binds has been localized to type III modules 3-5. In this study we use surface plasmon resonance to examine the interaction between various fragments of fibronectin and tenascin to further characterize and localize the binding sites. We found that tenascin fragments that contain type III modules 3-5 bind primarily to the N-terminal 29-kDa hep-1/fib-1 domain, which contains the first five type I modules of fibronectin. The dissociation constant, K(d), is approximately 1 microm. The binding site on fibronectin appears to be cryptic in the whole molecule in solution but is exposed on the proteolytic fragments and probably when fibronectin is in the extended conformation.     

Force-induced unfolding of fibronectin in the extracellular matrix of living cells

Whether mechanically unfolded fibronectin (Fn) is present within native extracellular matrix fibrils is controversial. Fn extensibility under the influence of cell traction forces has been proposed to originate either from the force-induced lengthening of an initially compact, folded quaternary structure as is found in solution (quaternary structure model, where the dimeric arms of Fn cross each other), or from the force-induced unfolding of type III modules (unfolding model). Clarification of this issue is central to our understanding of the structural arrangement of Fn within fibrils, the mechanism of fibrillogenesis, and whether cryptic sites, which are exposed by partial protein unfolding, can be exposed by cell-derived force. In order to differentiate between these two models, two fluorescence resonance energy transfer schemes to label plasma Fn were applied, with sensitivity to either compact-to-extended conformation (arm separation) without loss of secondary structure or compact-to-unfolded conformation. Fluorescence resonance energy transfer studies revealed that a significant fraction of fibrillar Fn within a three-dimensional human fibroblast matrix is partially unfolded. Complete relaxation of Fn fibrils led to a refolding of Fn. The compactly folded quaternary structure with crossed Fn arms, however, was never detected within extracellular matrix fibrils. We conclude that the resting state of Fn fibrils does not contain Fn molecules with crossed-over arms, and that the several-fold extensibility of Fn fibrils involves the unfolding of type III modules. This could imply that Fn might play a significant role in mechanotransduction processes.     

Structural basis for the activation of FGFR by NCAM

The fibroblast growth factor receptor (FGFR) can be activated through direct interaction with the neural cell adhesion molecule (NCAM). The extracellular part of the FGFR consists of three immunoglobulin-like (Ig) modules, and that of the NCAM consists of five Ig and two fibronectin type III (F3) modules. NCAM-FGFR interactions are mediated by the third FGFR Ig module and the second NCAM F3 module. Using surface plasmon resonance and nuclear magnetic resonance analyses, the present study demonstrates that the second Ig module of FGFR also is involved in binding to the NCAM. The second Ig module residues involved in binding were identified and shown to be localized on the "opposite sides" of the module, indicating that when NCAMs are clustered (e.g., due to homophilic binding), high-affinity FGFR binding sites may be formed by the neighboring NCAMs.     

Scaffoldin Conformation and Dynamics Revealed by a Ternary Complex from the Clostridium thermocellum Cellulosome

Cellulosomes are multienzyme complexes responsible for efficient degradation of plant cell wall polysaccharides. The nonenzymatic scaffoldin subunit provides a platform for cellulolytic enzyme binding that enhances the overall activity of the bound enzymes. Understanding the unique quaternary structural elements responsible for the enzymatic synergy of the cellulosome is hindered by the large size and inherent flexibility of these multiprotein complexes. Herein, we have used x-ray crystallography and small angle x-ray scattering to structurally characterize a ternary protein complex from the Clostridium thermocellum cellulosome that comprises a C-terminal trimodular fragment of the CipA scaffoldin bound to the SdbA type II cohesin module and the type I dockerin module from the Cel9D glycoside hydrolase. This complex represents the largest fragment of the cellulosome solved by x-ray crystallography to date and reveals two rigid domains formed by the type I cohesin·dockerin complex and by the X module-type II cohesin·dockerin complex, which are separated by a 13-residue linker in an extended conformation. The type I dockerin modules of the four structural models found in the asymmetric unit are in an alternate orientation to that previously observed that provides further direct support for the dual mode of binding. Conserved intermolecular contacts between symmetry-related complexes were also observed and may play a role in higher order cellulosome structure. SAXS analysis of the ternary complex revealed that the 13-residue intermodular linker of the scaffoldin subunit is highly dynamic in solution. These studies provide fundamental insights into modular positioning, linker flexibility, and higher order organization of the cellulosome.     

Integrity of refolded and reoxidized gelatin-binding fragments of fibronectin.

The gelatin-binding region of fibronectin is easily isolated as a stable and functional 42-kDa fragment (42-kDa GBF) containing four type I "finger" modules and two type II "kringle-like" modules arranged in the order I6-II1-II2-I7-I8-I9, where the numbers designate the order of these modules in each of the two polypeptide chains. Each module forms an independently folded domain stabilized by two disulfide bonds. Reduction of disulfides caused large changes in the intrinsic fluorescence and abolished the gelatin-binding activity of 42-kDa GBF and two nonoverlapping gelatin-binding subfragments, 30-kDa GBF (I6-II1-II2-I7) and 21-kDa GBF (I8-I9). However, high yields of active material could be regenerated, without diluting the protein, by dialysis into GdmCl followed by slow overnight removal of GdmCl while maintaining the redox potential with a mixture of oxidized and reduced glutathione. Fluorescence spectroscopic analysis indicated that the tertiary structure and thermodynamic stability of the refolded fragments were similar to those of the originals. The refolded fragments were quantitatively indistinguishable from the originals with respect to their dissociation constants for binding to a fluorescent-labeled collagen fragment. The results suggest that all or most of the cystines, a total of 24 in 42-kDa GBF, are correctly paired in the refolded products and that the tertiary structure was completely recovered. The fact that the 30- and 21-kDa fragments bind with a similar affinity proves the existence of at least two nonoverlapping sites in 42-kDa GBF that recognize gelatin.     

All six modules of the gelatin-binding domain of fibronectin are required for full affinity

The gelatin-binding sites of fibronectin are confined to a 42-kDa region having four type I and two type II modules in the following order: I(6)-II(1)-II(2)-I(7)-I(8)-I(9). To determine the relative importance of each module for recognition of gelatin, recombinant green fluorescent fusion proteins were prepared in which individual modules or groups of modules were deleted, and the resulting proteins were tested for binding to gelatin by analytical affinity chromatography. Deletion of both type II modules did not eliminate binding, confirming that at least some of the type I modules in this region are able to bind gelatin. It was found that deletion of type I module 6 tends to increase the affinity, whereas deletion of any other module decreases it. Deletion of module I(9) had a large effect but only if module II(2) was also present, suggesting an interaction between these two noncontiguous modules. Analysis of more than 20 recombinant fusion products led to the conclusion that all modules contribute to the interaction either directly by contacting the ligand or indirectly through module-module interactions.     

1H and 15N resonance assignment of the second fibronectin type III module of the neural cell adhesion molecule

We report here the NMR assignment of the second fibronectin type III module of the neural cell adhesion molecule (NCAM). This module has previously been shown to interact with the fibroblast growth factor receptor (FGFR), and the FGFR-binding site was mapped by NMR to the FG-loop region of the module. The FG-loop region also contains a putative nucleotide-binding motif, which was shown by NMR to interact with ATP. Furthermore, ATP was demonstrated to inhibit binding of the second F3 module of NCAM to FGFR.     

Ligation of the fibrin-binding domain by β-strand addition is sufficient for expansion of soluble fibronectin

How fibronectin (FN) converts from a compact plasma protein to a fibrillar component of extracellular matrix is not understood. "Functional upstream domain" (FUD), a polypeptide based on F1 adhesin of Streptococcus pyogenes, binds by anti-parallel β-strand addition to discontinuous sets of N-terminal FN type I modules, (2-5)FNI of the fibrin-binding domain and (8-9)FNI of the gelatin-binding domain. Such binding blocks assembly of FN. To learn whether ligation of (2-5)FNI, (8-9)FNI, or the two sets in combination is important for inhibition, we tested "high affinity downstream domain" (HADD), which binds by β-strand addition to the continuous set of FNI modules, (1-5)FNI, comprising the fibrin-binding domain. HADD and FUD were similarly active in blocking fibronectin assembly. Binding of HADD or FUD to soluble plasma FN exposed the epitope to monoclonal antibody mAbIII-10 in the tenth FN type III module ((10)FNIII) and caused expansion of FN as assessed by dynamic light scattering. Soluble N-terminal constructs truncated after (9)FNI or (3)FNIII competed better than soluble FN for binding of FUD or HADD to adsorbed FN, indicating that interactions involving type III modules more C-terminal than (3)FNIII limit β-strand addition to (1-5)FNI within intact soluble FN. Preincubation of FN with mAbIII-10 or heparin modestly increased binding to HADD or FUD. Thus, ligation of FNIII modules involved in binding of integrins and glycosaminoglycans, (10)FNIII and (12-14)FNIII, increases accessibility of (1-5)FNI. Allosteric loss of constraining interactions among (1-5)FNI, (10)FNIII, and (12-14)FNIII likely enables assembly of FN into extracellular fibrils.     

Structural insight into binding of Staphylococcus aureus to human fibronectin

Staphylococcus aureus possesses cell-wall attached proteins that bind the human protein fibronectin (Fn). An intermodule interface between the 4F1 and 5F1 modules in the N-terminal domain of Fn is maintained on bacterial peptide binding but there is a small change in the intermodule orientation and alignment of beta-strands that are predicted to bind the peptide. The module pair is elongated, as in the unbound state. Combined with evidence that residues in both 4F1 and 5F1 are directly involved in peptide binding, this observation supports the hypothesis that, when bound to intact Fn, the bacterial protein adopts an unusual, highly extended conformation.     

Domain structure and interactions of the type I and type II modules in the gelatin-binding region of fibronectin. All six modules are independently folded

The gelatin-binding region of fibronectin is isolated easily as a stable and functional 42 kDa fragment containing four type I "finger" modules and two type II "kringle-like" modules arranged in the order I6-II1-II2-I7-I8-I9. This fragment exhibits a single reversible melting transition near 64 degrees C in TBS buffer (0.02 M-Tris buffer containing 0.15 M-NaCl, pH 7.4). The transition is characterized by a calorimetric to van't Hoff enthalpy ratio of 1.6, suggesting a complex domain structure. A 30 kDa fragment with the same NH2 terminus (I6-II1-II2-I7) melts reversibly near 65 degrees C with delta Hcal/delta HvH = 1.3, also consistent with the presence of more than one domain. To elucidate further the domain structure, three non-overlapping subfragments were prepared and characterized with respect to their unfolding induced by heat and guanidinium chloride. The three subfragments, each containing two modules, are designated from amino or carboxyl-terminal location as 13 kDa (I6-II1) 16 kDa (II2-I7) and 21 kDa (I8-I9) according to their apparent Mr in SDS/polyacrylamide gel electrophoresis. All three subfragments exhibited reversible transitions in TBS buffer, behaving in the calorimeter as single co-operative units with delta Hcal/delta HvH close to unity. However, the specific enthalpies and changes in heat capacity associated with the melting of all fragments and subfragments in TBS buffer were low compared to those of most compact globular proteins, suggesting that not all modules are represented. When titrated with guanidinium chloride at 25 degrees C, all fragments exhibited monophasic reversible unfolding transitions detected by changes in fluorescence. Heating in the presence of 6 M-guanidinium chloride revealed three additional transitions not seen in the absence of denaturants. These transitions have been assigned to three of the four type I finger modules (I6, I7 and I9), one of which (I6) was isolated and shown to retain a compact structure as stable as that observed for this module within the parent fragments. Two other modules (II2 and I7) are destabilized when separated from their neighbors. Thus, despite their small size (50 to 60 amino acid residues), all six of the modules in the gelatin-binding region of fibronectin form independently folded domains, three of which (I6, I7 and I9) are unusually stable. Evidence is provided that four of the six modules interact with each other in the parent fragment. This interaction may explain previously noted disruptions in the otherwise uniform strand-like images seen in electron micrographs of fibronectin.     

Domain structure and domain-domain interactions in the carboxy-terminal heparin binding region of fibronectin.

The domain structures and stabilities of fragments isolated from the so-called 'hep 2' region of plasma fibronectin have been investigated by differential scanning calorimetry (DSC) and fluorescence spectroscopy. The 30 kDa hep-2A fragment contains three type III modules (III12 to III14), whereas the 40 kDa hep-2B fragment contains four such modules (III12 to III15). Melting of these fragments at neutral pH was irreversible and accompanied by rapid aggregation. In contrast, melting was completely reversible in 50 mM-glycine at pH 2.7, where DSC measurements revealed the presence of three independently folded domains in 30kDa hep-2A and four in 40 kDa hep-2B. That each domain represented a single module was confirmed by measurements with four single-module subfragments, all of which melted reversibly, even at neutral pH. At neutral pH in the presence of 6 M-urea, 30 kDa hep-2A melted reversibly in a sharp peak from which only two transitions could be resolved by deconvolution. Only the larger of these was stabilized by heparin and was assigned to modules III13 and III14. Upon isolation, module III13 melted at lower temperature than in the parent fragment where it is stabilized through an interaction with module III14. We conclude that all type III modules in the hep-2 region of fibronectin constitute independently folded domains. Modules III13 and III14 form a highly co-operative structure through functionally significant interactions that can be disrupted with acid or sufficient concentrations of urea or guanidinium chloride.     

Small Angle X-ray Scattering Analysis of Clostridium thermocellum Cellulosome N-terminal Complexes Reveals a Highly Dynamic Structure

Clostridium thermocellum produces the prototypical cellulosome, a large multienzyme complex that efficiently hydrolyzes plant cell wall polysaccharides into fermentable sugars. This ability has garnered great interest in its potential application in biofuel production. The core non-catalytic scaffoldin subunit, CipA, bears nine type I cohesin modules that interact with the type I dockerin modules of secreted hydrolytic enzymes and promotes catalytic synergy. Because the large size and flexibility of the cellulosome preclude structural determination by traditional means, the structural basis of this synergy remains unclear. Small angle x-ray scattering has been successfully applied to the study of flexible proteins. Here, we used small angle x-ray scattering to determine the solution structure and to analyze the conformational flexibility of two overlapping N-terminal cellulosomal scaffoldin fragments comprising two type I cohesin modules and the cellulose-specific carbohydrate-binding module from CipA in complex with Cel8A cellulases. The pair distribution functions, ab initio envelopes, and rigid body models generated for these two complexes reveal extended structures. These two N-terminal cellulosomal fragments are highly dynamic and display no preference for extended or compact conformations. Overall, our work reveals structural and dynamic features of the N terminus of the CipA scaffoldin that may aid in cellulosome substrate recognition and binding.     

The solution and crystal structures of a module pair from the Staphylococcus aureus-binding site of human fibronectin--a tale with a twist

An important goal of structural studies of modular proteins is to determine the inter-module orientation, which often influences biological function. The N-terminal domain of human fibronectin (Fn) is composed of a string of five type 1 modules (F1). Despite their small size, to date F1 modules have proved intractable to X-ray structure solution, although there are several NMR structures available. Here, we present the first structures (two X-ray models and an NMR-derived model) of the (2)F1(3)F1 module pair, which forms part of the binding site for Fn-binding proteins from pathogenic bacteria. The crystallographic structure determination was aided by the novel technique of UV radiation damage-induced phasing. The individual module structures are very similar in all three models. In the NMR structure and one of the X-ray structures, a similar but smaller interdomain interface than that observed previously for (4)F1(5)F1 is seen. The other X-ray structure has a different interdomain orientation. This work underlines the benefits of combining X-ray and NMR data in the studies of multi-domain proteins.     

Three-dimensional EM structure of the ectodomain of integrin {alpha}V{beta}3 in a complex with fibronectin

Integrins are alphabeta heterodimeric cell surface receptors that mediate transmembrane signaling by binding extracellular and cytoplasmic ligands. The ectodomain of integrin alphaVbeta3 crystallizes in a bent, genuflexed conformation considered to be inactive (unable to bind physiological ligands in solution) unless it is fully extended by activating stimuli. We generated a stable, soluble complex of the Mn(2+)-bound alphaVbeta3 ectodomain with a fragment of fibronectin (FN) containing type III domains 7 to 10 and the EDB domain (FN7-EDB-10). Transmission electron microscopy and single particle image analysis were used to determine the three-dimensional structure of this complex. Most alphaVbeta3 particles, whether unliganded or FN-bound, displayed compact, triangular shapes. A difference map comparing ligand-free and FN-bound alphaVbeta3 revealed density that could accommodate the RGD-containing FN10 in proximity to the ligand-binding site of beta3, with FN9 just adjacent to the synergy site binding region of alphaV. We conclude that the ectodomain of alphaVbeta3 manifests a bent conformation that is capable of stably binding a physiological ligand in solution.     

1H and 15N NMR resonance assignments and secondary structure of titin type I domains

Titin/connectin is a giant muscle protein with a highly modular architecture consisting ofmultiple repeats of two sequence motifs, named type I and type II. Type I modules have beensuggested to be intracellular members of the fibronectin type III (Fn3) domain family. Alongthe titin sequence they are exclusively present in the region of the molecule located in thesarcomere A-band. This region has been shown to interact with myosin and C-protein. Oneof the most noticeable features of type I modules is that they are particularly rich insemiconserved prolines, since these residues account for about 8% of their sequence. We havedetermined the secondary structure of a representative type I domain (A71) by 15N and 1HNMR. We show that the type I domains of titin have the Fn3 fold as proposed, consisting ofa three- and a four-stranded -sheet. When the two sheets are placed on top of each other toform the -sandwich characteristic of the Fn3 fold, 8 out of 10 prolines are found on the sameside of the molecule and form an exposed hydrophobic patch. This suggests that thesemiconserved prolines might be relevant for the function of type I modules, providing asurface for binding to other A-band proteins. The secondary structure of A71 was structurallyaligned to other extracellular Fn3 modules of known 3D structure. The alignment shows thattitin type I modules have closest similarity to the first Fn3 domain of Drosophila neuroglian.     

Amphioxus connectin exhibits merged structure as invertebrate connectin in I-band region and vertebrate connectin in A-band region

Connectin is an elastic protein found in vertebrate striated muscle and in some invertebrates as connectin-like proteins. In this study, we determined the structure of the amphioxus connectin gene and analyzed its sequence based on its genomic information. Amphioxus is not a vertebrate but, phylogenetically, the lowest chordate. Analysis of gene structure revealed that the amphioxus gene is approximately 430 kb in length and consists of regions with exons of repeatedly aligned immunoglobulin (Ig) domains and regions with exons of fibronectin type 3 and Ig domain repeats. With regard to this sequence, although the region corresponding to the I-band is homologous to that of invertebrate connectin-like proteins and has an Ig-PEVK region similar to that of the Neanthes sp. 4000K protein, the region corresponding to the A-band has a super-repeat structure of Ig and fibronectin type 3 domains and a kinase domain near the C-terminus, which is similar to the structure of vertebrate connectin. These findings revealed that amphioxus connectin has the domain structure of invertebrate connectin-like proteins at its N-terminus and that of vertebrate connectin at its C-terminus. Thus, amphioxus connectin has a novel structure among known connectin-like proteins. This finding suggests that the formation and maintenance of the sarcomeric structure of amphioxus striated muscle are similar to those of vertebrates; however, its elasticity is different from that of vertebrates, being more similar to that of invertebrates.     

Structural basis for a direct interaction between FGFR1 and NCAM and evidence for a regulatory role of ATP

The neural cell adhesion molecule (NCAM) promotes axonal outgrowth, presumably through an interaction with the fibroblast growth factor receptor (FGFR). NCAM also has a little-understood ATPase activity. We here demonstrate for the first time a direct interaction between NCAM (fibronectin type III [F3] modules 1 and 2) and FGFR1 (Ig modules 2 and 3) by surface plasmon resonance (SPR) analysis. The structure of the NCAM F3 module 2 was determined by NMR and the module was shown by NMR to interact with the FGFR1 Ig module 3 and ATP. The NCAM sites binding to FGFR and ATP were found to overlap and ATP was shown by SPR to inhibit the NCAM-FGFR binding, indicating that ATP probably regulates the NCAM-FGFR interaction. Furthermore, we demonstrate that the NCAM module was able to induce activation (phosphorylation) of FGFR and to stimulate neurite outgrowth. In contrast, ATP inhibited neurite outgrowth induced by the module.     

Origin of fibronectin type II (FN2) modules: structural analyses of distantly-related members of the kringle family idey the kringle domain of neurotrypsin as a potential link between FN2 domains and kringles

Analysis of complete genome sequences has made it clear that fibronectin type II (FN2) modules are present only in the vertebrate lineage, raising intriguing questions about the origin of this module type. Kringle domains display many similarities to FN2 domains; therefore it was suggested previously that they are highly divergent descendants of the same ancestral protein-fold. Since kringles are present in arthropodes, nematodes, and invertebrate chordates as well as in vertebrates, it is suggested that the FN2 domain arose in the vertebrate lineage through major structural modification of the more ancestral kringle fold. To explore this structural transition, in the present work we compare key structural features of two highly divergent kringle domains (the kringle of Caenorhabditis elegans Ror receptor tyrosine kinase and the kringle of rat neurotrypsin) with those of plasminogen kringles and FN2 domains. Our NMR conformation fingerprinting analysis indicates that characteristic (1)H-NMR markers of kringle or FN2 native folding, such as the dispersion of Trp aromatic connectivities and shifts of the Leu(46)/Thr(16) methyl signals, both decrease in the order kringles > neurotrypsin kringle > FN2 domains. These results suggest that the neurotrypsin kringle may represent an intermediate form between typical kringles and FN2 domains.     

Structure and analysis of FCHo2 F-BAR domain: a dimerizing and membrane recruitment module that effects membrane curvature

A spectrum of membrane curvatures exists within cells, and proteins have evolved different modules to detect, create, and maintain these curvatures. Here we present the crystal structure of one such module found within human FCHo2. This F-BAR (extended FCH) module consists of two F-BAR domains, forming an intrinsically curved all-helical antiparallel dimer with a Kd of 2.5 microM. The module binds liposomes via a concave face, deforming them into tubules with variable diameters of up to 130 nm. Pulse EPR studies showed the membrane-bound dimer is the same as the crystal dimer, although the N-terminal helix changed conformation on membrane binding. Mutation of a phenylalanine on this helix partially attenuated narrow tubule formation, and resulted in a gain of curvature sensitivity. This structure shows a distant relationship to curvature-sensing BAR modules, and suggests how similar coiled-coil architectures in the BAR superfamily have evolved to expand the repertoire of membrane-sculpting possibilities.     

Bivalent Ligation of the Collagen-binding Modules of Fibronectin by SFS,a Non-anchored Bacterial Protein of Streptococcus equi

SFS is a non-anchored protein of Streptococcus equi subspecies equi that causes upper respiratory infection in horses. SFS has been shown to bind to fibronectin (FN) and block interaction of FN with type I collagen. We have characterized interactions of a recombinant 60-mer polypeptide, R1R2, with FN. R1R2 contains two copies of collagen-like 19-residue repeats. Experiments utilizing various FN fragments and epitope-mapped anti-FN monoclonal antibodies located the binding site to ^8-9FNI modules of the gelatin-binding domain. Fluorescence polarization and competitive enzyme-linked assays demonstrated that R1R2 binds preferentially to compact dimeric FN rather than monomeric constructs containing ^8-9FNI or a large dimeric FN construct that is constitutively in an extended conformation. In contrast to bacterial peptides that bind ^2–5FNI in addition to ^8-9FNI, R1R2 did not cause conformational extension of FN as assessed by a conformationally sensitive antibody. Equilibrium and stopped-flow binding assays and size exclusion chromatography were compatible with a two-step binding reaction in which each of the repeats of R1R2 interacts with one of the subunits of dimeric FN, resulting in a stable complex with a slow k_off. In addition to not binding to type I collagen, the R1R2·FN complex incorporated less efficiently into extracellular matrix than free FN. Thus, R1R2 binds to FN utilizing features of compact soluble FN and in doing so interferes with the organization of the extracellular matrix. A similar bivalent binding strategy may underlie the collagen-FN interaction.