Detection of Legionella spp. and Legionella pneumophila in water samples of Spain by specific real-time PCR

Legionella pneumophila is the primary cause of the legionellosis diseases (90 %) (Yu et al. in J Infect Dis 186:127–128, 2002; Doleans et al. in J Clin Microbiol 42:458–460, 2004; Den Boer et al. in Clin Microbiol Infect 14:459–466, 2008). In this study, methodologies based on molecular biology were developed in order to provide a quick diagnosis of the bacterial presence in water samples of Spain. Multiplex real-time polymerase chain reaction assays were realized to target the 16S rRNA and macrophage infectivity potentiator (mip) genes of, respectively, Legionella spp. and L. pneumophila including in the design of an internal control. The results obtained by the culture and the gene amplification methods agreed in 94.44 % for the 16S rRNA gene, and a concordance of 66.67 % of the cases was obtained for the mip gene.     

Detection and quantification of Legionella pneumophila in water samples using competitive PCR

The presence of high levels of Legionella pneumophila in man-made aquatic systems correlates with the incidence of nosocomial Legionnaires' disease. This requires a rapid, reliable, and sensitive quantification of L. pneumophila concentrations in suspected water systems. In this research, a homologous competitor was developed and evaluated in a L. pneumophila competitive polymerase chain reaction (cPCR) to quantify this human pathogen in a quick, cost-effective, and reliable way. Accuracy of cPCR was evaluated by analyzing cooling tower and tap water samples spiked with known concentrations of L. pneumophila bacteria, in parallel with the standard culture method. Legionella pneumophila amounts detected and calculated from cPCR and culture correlated very well: r = 0.998, P = 0.002 for tap water and r = 0.990, P = 0.009 for cooling tower water. Nevertheless, for both kinds of water samples, mean numbers of L. pneumophila calculated from cPCR results were always higher than those obtained by culture. This study makes it clear that the rapid, sensitive, and cost-effective L. pneumophila cPCR is a promising alternative to the standard time-consuming culture method and expensive real-time PCR to enumerate L. pneumophila bacteria in environmental water samples.     

Evaluation of nested PCR assays for the detection of Legionella pneumophila in a wide range of aquatic samples

AIMS: To compare the sensitivities of two nested PCR assays for the detection of Legionella pneumophila to each other and to the plate counting technique (ISO 11731) in a wide range of aquatic samples. METHODS AND RESULTS: The nested PCR assay with the primer set LEG 225-LEG 858 revealed 56% of the 46 analysed aquatic samples as being positive for Legionella spp., while the primer set JFP-JRP yielded 98% positive samples. The detection was confirmed by sequencing the PCR products. These results are considerably higher than the result obtained with the plate counting technique (41%), indicating the higher sensitivity of PCR-based diagnostic methods. As the PCR assay with the LEG 225-LEG 858 primer set resulted in a lower number of positive samples, it is considered not sensitive enough for aquatic samples. Similar results for the respective primer sets were obtained for the detection of the species L. pneumophila, responsible for 90% of all human Legionella infections, in the aquatic samples analysed. Both microbial community analysis by PCR-denaturing gradient gel electrophoresis and the analysis of biotic and abiotic water quality parameters revealed no relation between L. pneumophila-positive and -negative samples and the physico-chemical and bacteriological characteristics of the aquatic samples. CONCLUSIONS: The results show the additional value of the PCR assay with the JFP-JRP primer set compared with the plate counting technique, as well as its applicability in a wide range of aquatic samples. SIGNIFICANCE AND IMPACT OF THE STUDY: This study shows the importance of comparing different primer sets for nested PCR assays for the detection of L. pneumophila in aquatic samples, as well as the lower sensitivity of the widely accepted plate counting technique (ISO 11731).     

Quantitative detection of Legionella pneumophila in water samples by immunomagnetic purification and real-time PCR amplification of the dotA gene

A new real-time PCR assay was developed and validated in combination with an immunomagnetic separation system for the quantitative determination of Legionella pneumophila in water samples. Primers that amplify simultaneously an 80-bp fragment of the dotA gene from L. pneumophila and a recombinant fragment including a specific sequence of the gyrB gene from Aeromonas hydrophila, added as an internal positive control, were used. The specificity, limit of detection, limit of quantification, repetitivity, reproducibility, and accuracy of the method were calculated, and the values obtained confirmed the applicability of the method for the quantitative detection of L. pneumophila. Moreover, the efficiency of immunomagnetic separation in the recovery of L. pneumophila from different kinds of water was evaluated. The recovery rates decreased as the water contamination increased (ranging from 59.9% for distilled water to 36% for cooling tower water), and the reproducibility also decreased in parallel to water complexity. The feasibility of the method was evaluated by cell culture and real-time PCR analysis of 60 samples in parallel. All the samples found to be positive by cell culture were also positive by real-time PCR, while only eight samples were found to be positive only by PCR. Finally, the correlation of both methods showed that the number of cells calculated by PCR was 20-fold higher than the culture values. In conclusion, the real-time PCR method combined with immunomagnetic separation provides a sensitive, specific, and accurate method for the rapid quantification of L. pneumophila in water samples. However, the recovery efficiency of immunomagnetic separation should be considered in complex samples.     

Specific real-time PCR for simultaneous detection and identification of Legionella pneumophila serogroup 1 in water and clinical samples

Legionella pneumophila, a bacterium that replicates within aquatic amoebae and persists in the environment as a free-living microbe, is the causative agent of Legionnaires' disease. Among the many Legionella species described, L. pneumophila is associated with 90% of human disease, and within the 15 serogroups (Sg), L. pneumophila Sg1 causes more than 84% of Legionnaires' disease worldwide. Thus, rapid and specific identification of L. pneumophila Sg1 is of the utmost importance for evaluation of the contamination of collective water systems and the risk posed. Previously we had shown that about 20 kb of the 33-kb locus carrying the genes coding for the proteins involved in lipopolysaccharide biosynthesis (LPS gene cluster) by L. pneumophila was highly specific for Sg1 strains and that three genes (lpp0831, wzm, and wzt) may serve as genetic markers. Here we report the sequencing and comparative analyses of this specific region of the LPS gene cluster in L. pneumophila Sg6, -10, -12, -13, and -14. Indeed, the wzm and wzt genes were present only in the Sg1 LPS gene cluster, which showed a very specific gene content with respect to the other five serogroups investigated. Based on this observation, we designed primers and developed a classical and a real-time PCR method for the detection and simultaneous identification of L. pneumophila Sg1 in clinical and environmental isolates. Evaluation of the selected primers with 454 Legionella and 38 non-Legionella strains demonstrated 100% specificity. Sensitivity, specificity, and predictive values were further evaluated with 209 DNA extracts from water samples of hospital water supply systems and with 96 respiratory specimens. The results showed that the newly developed quantitative Sg1-specific PCR method is a highly specific and efficient tool for the surveillance and rapid detection of high-risk L. pneumophila Sg1 in water and clinical samples.     

Enterotoxigenic Escherichia coli is detectable in water samples from an endemic area by real-time PCR

Aims: We aimed to develop an assay for sensitive detection and quantification of enterotoxigenic Escherichia coli (ETEC) in different types of water samples. Methods and Results: Real‐time polymerase chain reaction (PCR) assays with primers against ETEC enterotoxin genes estA (STh) estB (STp) and eltB (LT) were designed and the detection levels were determined to be three bacteria per PCR reaction. Gene copy numbers were estimated to be four (LT), two (STh) and one (STp) per bacteria. Twenty‐six household and 13 environmental water samples from Bangladesh were filtered through 0·22‐μm filters; DNA was extracted from the filters and analysed by real‐time PCR. The results were compared with toxin GM1‐enzyme‐linked immunosorbent assay (ELISA), in which colonies were tested for toxin production after cultivation of the filters. Out of the 39 samples tested, 18 household and 8 environmental samples were positive for ETEC in real‐time PCR, but only 6 positive samples were found with GM1‐ELISA. Conclusions: The method allows for highly sensitive detection and quantification of ETEC based on detection of toxin DNA in water samples. Significance and Impact of the Study: The method facilitates detection and identification of ETEC in water and allows comparison between water contamination and incidence of ETEC diarrhoea in endemic areas.     

Integrated real-time PCR for detection and monitoring of Legionella pneumophila in water systems

We evaluated a ready-to-use real-time quantitative Legionella pneumophila PCR assay system by testing 136 hot-water-system samples collected from 55 sites as well as 49 cooling tower samples collected from 20 different sites, in parallel with the standard culture method. The PCR assay was reproducible and suitable for routine quantification of L. pneumophila. An acceptable correlation between PCR and culture results was obtained for sanitary hot-water samples but not for cooling tower samples. We also monitored the same L. pneumophila-contaminated cooling tower for 13 months by analyzing 104 serial samples. The culture and PCR results were extremely variable over time, but the curves were similar. The differences between the PCR and culture results did not change over time and were not affected by regular biocide treatment. This ready-to-use PCR assay for L. pneumophila quantification could permit more timely disinfection of cooling towers.     

Development and evaluation of a Taqman duplex real-time PCR quantification method for reliable enumeration of Legionella pneumophila in water samples

This study describes the development and evaluation of a specific Legionella pneumophila Taqman duplex real-time PCR (qPCR) for fast and reliable quantification of this human pathogen in suspected man-made water systems. The qPCR assay was 100% specific for all L. pneumophila serogroups 1-15 with a sensitivity of 60 genome units/l and an amplification efficiency of 98%. Amplification inhibitors were detected via an exogenous internal positive control, which was amplified simultaneously with L. pneumophila DNA using its own primer and probe set. Mean recovery rates of the qPCR assay for tap water and cooling circuit water, spiked with a known number L. pneumophila bacteria, were 93.0% and 56.3%, respectively. Additionally, by using the Ultraclean Soil DNA isolation kit, we were able to remove amplification inhibitors ubiquitously present in cooling water. The practical value of our qPCR assay was evaluated through analysis of 30 water samples from showers, taps, eyewash stations, fire sprinklers and recirculation loops with qPCR and traditional culture. In conclusion, the described L. pneumophila Taqman duplex real-time assay proved to be specific, sensitive and reproducible. This makes it a promising method complementing the current time-consuming culture standard method.     

Detection of legionellae in hospital water samples by quantitative real-time LightCycler PCR

Contamination of hospital water systems with legionellae is a well-known cause of nosocomial legionellosis. We describe a new real-time LightCycler PCR assay for quantitative determination of legionellae in potable water samples. Primers that amplify both a 386-bp fragment of the 16S rRNA gene from Legionella spp. and a specifically cloned fragment of the phage lambda, added to each sample as an internal inhibitor control, were used. The amplified products were detected by use of a dual-color hybridization probe assay design and quantified with external standards composed of Legionella pneumophila genomic DNA. The PCR assay had a sensitivity of 1 fg of Legionella DNA (i.e., less than one Legionella organism) per assay and detected 44 Legionella species and serogroups. Seventy-seven water samples from three hospitals were investigated by PCR and culture. The rates of detection of legionellae were 98.7% (76 of 77) by the PCR assay and 70.1% (54 of 77) by culture; PCR inhibitors were detected in one sample. The amounts of legionellae calculated from the PCR results were associated with the CFU detected by culture (r = 0.57; P < 0.001), but PCR results were mostly higher than the culture results. Since L. pneumophila is the main cause of legionellosis, we further developed a quantitative L. pneumophila-specific PCR assay targeting the macrophage infectivity potentiator (mip) gene, which codes for an immunophilin of the FK506 binding protein family. All but one of the 16S rRNA gene PCR-positive water samples were also positive in the mip gene PCR, and the results of the two PCR assays were correlated. In conclusion, the newly developed Legionella genus-specific and L. pneumophila species-specific PCR assays proved to be valuable tools for investigation of Legionella contamination in potable water systems.     

Legionella pneumophila in commercial bottled mineral water

Sixty-eight commercial bottled mineral waters (64 brands, 68 different 'best-before dates') were tested for the presence of bacteria and fungi. Six samples were Legionella antigen positive and six were Legionella pneumophila PCR positive. Two samples were both Legionella antigen and L. pneumophila PCR positive. Legionella cultures were negative. Although the PCR might have detected only dead Legionella cells, the PCR has been described to detect specifically viable but not culturable (VBNC) L. pneumophila cells as well. Whether VBNC bacteria may be present in bottled mineral waters and the risk for infection this may pose for severely immunocompromised patients should be investigated.     

Multiplication of Legionella pneumophila in HeLa Cells in the Presence of Cytoskeleton and Metabolic Inhibitors

A study has been carried out on the action of cytoskeleton and metabolic inhibitors on intracellular multiplication in HeLa cells of a virulent strain of Legionella pneumophila serogroup 6. The effects of the substances were separately tested on both penetration and intracellular multiplication of L. pneumophila. Only cytochalasin A and 2-deoxy-d -glucose (2dG) affected bacterial internalisation, whereas intracellular multiplication was inhibited by cytochalasins A, B, C, D and J (D being the most active) and by 2dG with a dose-response effect. The action of 2dG was counteracted by 50 mM glucose. Experiments carried out with cytochalasin D and a rhodamine-phalloidin conjugate showed the involvement of cytoskeletal elements in intracellular multiplication of Legionella; compounds acting on microtubules had no effect.     

Integrated Real-Time PCR for Detection and Monitoring of Legionella pneumophila in Water Systems

We evaluated a ready-to-use real-time quantitative Legionella pneumophila PCR assay system by testing 136 hot-water-system samples collected from 55 sites as well as 49 cooling tower samples collected from 20 different sites, in parallel with the standard culture method. The PCR assay was reproducible and suitable for routine quantification of L. pneumophila. An acceptable correlation between PCR and culture results was obtained for sanitary hot-water samples but not for cooling tower samples. We also monitored the same L. pneumophila-contaminated cooling tower for 13 months by analyzing 104 serial samples. The culture and PCR results were extremely variable over time, but the curves were similar. The differences between the PCR and culture results did not change over time and were not affected by regular biocide treatment. This ready-to-use PCR assay for L. pneumophila quantification could permit more timely disinfection of cooling towers.     

Detection of Legionella pneumophila in bioaerosols by polymerase chain reaction

Most studies focusing on detecting microorganisms in air by polymerase chain reaction (PCR) have used a liquid impinger to sample bioaerosols, mainly because a liquid sample is easy to be processed by PCR analysis. Nevertheless, the use of multiple-hole impactors for the analysis of bioaerosols by PCR has not been reported despite its great utility in culture analysis. In this study we have modified the impaction onto an agar surface sampling method to impaction onto a liquid medium using the MAS-100 air sampler (Merck) (single-stage multiple-hole impactor). To evaluate the recovery of airborne microorganisms of both sampling methods, a suspension containing Escherichia coli was artificially aerosolized and bioaerosols were collected onto Tergitol-7 agar and phosphate-buffered saline (PBS) with the MAS-100. A linear regression analysis of the results showed a strong positive correlation between both sampling methods (r = 0.99, slope 0.99, and y intercept 0.07). Afterwards, the method of impingement into a liquid medium was used to study airborne Legionella pneumophila by PCR. A total of 64 samples were taken at a wastewater treatment plant, a chemical plant, and an office building and analyzed by culture and PCR. Results showed that three samples were positive both by PCR and plate culture, and that nine samples negative by plate culture were positive by PCR, proving that L. pneumophila was present in bioaerosols from these three different environments. The results demonstrate the utility of this single-stage multiple-hole impactor for sampling bioaerosols, both by culture and by PCR.     

Detection of bioterror agents in air samples using real-time PCR

Aims:  To use real-time PCR for the detection of bacterial bioterror agents in a liquid air sample containing potential airborne interferences, including bacteria, without the need for DNA extraction.
Methods and Results:  Bacteria in air were isolated after passive sedimentation onto R2A agar plates and characterized by 16S rRNA sequencing. Real-time PCR was used to identify different bacterial bioterror agents in an artificial air sample consisting of a liquid air sample and a mixture of miscellaneous airborne bacteria showing different colony morphology on R2A agar plates. No time-consuming DNA extraction was performed. Specifically designed fluorescent hybridization probes were used for identification.
Conclusions:  Fourteen different bacterial genera were classified by 16S rRNA gene sequencing of selected bacterial colonies showing growth on R2A agar plates. Real-time PCR amplification of all the bacterial bioterror agents was successfully obtained in the artificial air sample containing commonly found airborne bacteria and other potential airborne PCR interferences.
Significance and Impact of the Study:  Bacterial bioterror agents can be detected within 1 h in a liquid air sample containing a variety of commonly found airborne bacteria using real-time PCR. Airborne viable bacteria at Kjeller (Norway) were classified to the genera level using 16S rRNA gene sequencing.