Separation methods for pharmacologically active xanthones

Xanthones, as a kind of polyphenolic natural products with many strong bioactivities, are attractive for separation scientists due to the similarity and diversity of their structures resulting in difficult separation by chromatographic methods. High performance liquid chromatography (HPLC) and thin layer chromatography (TLC) are traditional methods to separate xanthones. Recently, capillary electrophoresis (CE), as a micro-column technique driven by electroosmotic flow (EOF), with its high efficiency and high-speed separation, has been employed to separate xanthones and determine their physicochemical properties such as binding constants with cyclodextrin (CD) and ionization constants. Since xanthones have been used in clinic treatment, the development of chromatographic and CE methods for the separation and determination of xanthones plays an essential role in the quality control of some herbal medicines containing xanthones. This article reviewed the separation of xanthones by HPLC, TLC and CE, citing 72 literatures. This review focused on the CE separation for xanthones due to its unique advantages compared to chromatographic methods. The comparison of separation selectivity of different CE modes including capillary zone electrophoresis (CZE), micellar electrokinetic chromatography (MEKC), microemulsion electrokinetic capillary chromatography (MEEKC) and capillary electrochromatography (CEC) was discussed. Compared with traditional chromatographic methods such as HPLC and TLC, CE has higher separation efficiency, faster separation, lower cost and more flexible modes. However, because of low sensitivity of UV detector and low contents of xanthones in herbal medicines, CE methods have seldom been applied to the analysis of real samples although CE showed great potential for xanthone separation. The determination of xanthones in herbal medicines has been often achieved by HPLC. Hence, how to enhance CE detection sensitivity for real sample analysis, e.g. by on-line preconcentration and CE-MS, would be a key to achieve the quantitation of xanthones.     

Analysis of ellagic acid in pomegranate rinds by capillary electrophoresis and high-performance liquid chromatography

Two novel methods for the analysis of ellagic acid in pomegranate (Punica granatum) rinds are proposed. Capillary electrophoresis (CE) was performed in a bare fused-silica capillary using a buffer solution of tri(hydroxymethyl)aminomethane:potassium dihydrogen phosphate (pH 8.4) with an applied voltage of 20 kV and UV detection at 254 nm. HPLC analysis was performed with a Zobax SB C(18) column and a mobile phase consisting of methanol:ethyl acetate:potassium dihydrogen phosphate: phosphoric acid at a flow rate of 1.0 mL/min. Under optimised conditions, the HPLC retention and the CE migration times for ellagic acid were 10.32 and 12.23 min, respectively. Calibration curves of peak area vs. concentration gave correlation coefficients of 0.9999 for HPLC and 0.9990 for CE. The detection limits for HPLC and CE were 2.8 and 2.2 microg/mL, respectively. Average recoveries were 98.32 +/- 1.2% for HPLC and 96.52 +/- 2.8% for CE. Both methods were shown to be suitable for the determination of ellagic acid in pomegranate rinds extraction; however, the CE method required less solvent and gave better column efficiency, whilst the HPLC provided superior precision.     

Analysis of optical purity and impurity of synthetic D-phenylalanine products using sulfated beta-cyclodextrin as chiral selector by reversed-polarity capillary electrophoresis

A new capillary electrophoresis (CE) method has been achieved for simultaneous separation and quantification of phenylalanine, N-acetylphenylalanine enantiomers, and prochiral N-acetylaminocinnamic acid, possibly co-existent in reaction systems or synthesized products of D-phenylalanine. The separation was carried out in an uncoated capillary under reversed-electrophoretic mode. Among the diverse charged cyclodextrins (CDs) examined, highly sulfated (HS)-beta-CD as the chiral selector exhibited the best enantioselectivity. The complete separation of the analytes was obtained under the optimum conditions of pH 2.5, 35 mM Tris buffer containing 4% HS-beta-CD, applied voltage -15 kV, and capillary temperature 25 degrees C. Furthermore, the proposed method was applied to the determination of optical purity and trace impurities in three batches of the asymmetric synthetic samples of D-phenylalanine, and satisfactory results were obtained. The determination recoveries of the samples were in the range of 97.8-103.8%, and precisions fell within 2.3-5.0% (RSD). The results demonstrate that this CE method is a useful, simple technique and is applicable to purity assays of D-phenylalanine.     

Recent progress in capillary electrophoretic analysis of amino acid enantiomers

This review highlights recent progresses in capillary electrophoresis (CE) analysis of amino acid enantiomers in the last decade. Various chiral selectors including cyclodextrins (CDs), bile salts, crown ethers, cinchona alkaloids, metal-chiral amino acid complexes, macrocyclic antibiotics and proteins have been employed to separate amino acid enantiomers. In the CE analysis of amino acids, the selection of the separation mode is one of the most important issues to obtain good resolution of target enantiomers. Among several separation modes, CD-modified capillary zone electrophoresis (CD-CZE), CD electrokinetic chromatography (CDEKC), micellar EKC (MEKC), CD-modified micellar electrokinetic chromatography (CD-MEKC), capillary electrochromatography (CEC), ligand-exchange CE (LE-CE), and nonaqueous CE (NACE) have been employed to the chiral analysis of amino acids. More than 160 published research articles collected from SciFinder Scholar databases from the year 2001 described the enantioseparations of amino acids by capillary-based electrophoresis. This review provides a comprehensive table listing the CE analysis of amino acid enantiomers with categorizing by the separation modes.     

Heart-cut two-dimensional separation method via hyphenation of micellar electrokinetic capillary chromatography and capillary zone electrophoresis using analyte focusing by micelle collapse

A novel two-dimensional (2D) separation method, which hyphenated micellar electrokinetic capillary chromatography (MEKC) and capillary zone electrophoresis (CZE), was developed for analysis of flavonoids in Leonurus cardiaca. The Leonurus cardiaca sample was separated and purified in first dimension by MEKC. Then only a selected portion of the first dimension separation was transferred into the second dimension by pressure. Finally, the zone of flavonoids was separated by CZE. As the key to successful hyphenation of MEKC and CZE, an analyte focusing by micelle collapse (AFMC) concentration method was employed between the two dimensions to release analytes from the micelle interior to a liquid zone and to overcome the sample zone diffusion caused by mobilization pressure. The whole heart-cut 2D separation process can be performed in a conventional CE analyzer. The relative standard deviation of peak height, peak area and migration time were in the range of 2.3-4.2%, 1.5-3.8% and 3.6-5.5%, respectively, and detection limits (S/N=3) were 15-55 ng/mL. The new methodology was applied with success for the flavonoids separation of Leonurus cardiaca.     

Development of a capillary electrophoretic method for the separation of the macrolide antibiotics, erythromycin, josamycin and oleandomycin

Capillary electrophoresis (CE) provides high separation efficiency and thus is suitable for the analysis of complex mixtures of structurally similar compounds. The versatile nature of CE can be realised by controlling the chemistry of the inner capillary wall, by modifying the electrolyte composition and by altering the physicochemical properties of the analyte. A CE method has been developed for the separation of three macrolide antibiotics, erythromycin, oleandomycin and josamycin. A systematic approach was used to maximise analyte differential electrophoretic mobility by manipulating electrolyte pH, molarity and composition. In addition, some instrumental parameters such as capillary length and diameter and applied voltage were varied. The effect of the sample solvent and on-capillary concentrating techniques such as field amplified sample injection were investigated. Also, the influence of the injection of a water plug on the quantity of sample injected was demonstrated. The macrolides were completely resolved in less than 30 min in a 100 cm×75 μm I.D. fused-silica uncoated capillary with a Z-shaped flow cell of path-length 3 mm. The analysis was performed in a 75 mM phosphate buffer (pH 7.5) with 50% (v/v) methanol and an applied voltage of 25 kV was selected to effect the separation.     

High-speed microchip electrophoresis method for the separation of (R,S)-naproxen

In this research, a capillary electrophoretic method for the fast enantiomeric resolution of (R,S)-naproxen was investigated. Method development involved variation of applied potential, buffer concentration, buffer pH, and cyclodextrin concentration. The optimum electrophoretic separation conditions were 110 mM sodium acetate run buffer (pH 6.0), 30 mM methyl-beta-cyclodextrin, 20% (v/v) acetonitrile, 25 degrees C. The total length of capillary was 48 cm, (50 microm I.D.) with ultra violet (UV) detection at 232 nm. Using these conditions, the number of theoretical plates was close to one million (896,000/m). The possibility of achieving a fast chiral separation of (R,S)-naproxen on a microchip of 2.5 cm in length was investigated. Complete enantiomeric resolution of naproxen was achieved in less than 1 min, on this microchip platform, with linear imaging UV detection. This system had the advantage of real-time separation monitoring, so that enantiomeric resolution could be visually observed, and high-speed chiral analysis was realized. The microchip electrophoresis (MCE) separation was compared with the capillary electrophoresis (CE) separation with regards to speed, efficiency, separation platform, and precision. This work highlights the potential of CE and MCE in future chiral separations.     

On-column preconcentration of glutathione and glutathione disulfide using pH-mediated base stacking for the analysis of microdialysis samples by capillary electrophoresis

Capillary electrophoresis (CE) has become a useful analytical tool for the analysis of microdialysis samples. However, CE with UV detection (CE-UV) does not provide detection limits sufficient to quantify glutathione (GSH) and glutathione disulfide (GSSG) in biological samples such as liver microdialysates, because of the small optical path length in the capillary. To overcome this limitation, an on-column preconcentration technique, pH-mediated base stacking, was used in this study to improve the sensitivity of CE-UV. This stacking technique allowed large volumes of high ionic strength sample injection without deterioration of the separation efficiency and resolution. A 26-fold increase in sensitivity was achieved for both GSH and GSSG using the pH-mediated base stacking, relative to normal injection without stacking. The limit of detection for GSH and GSSG was found to be 0.75 microM (S/N=6) and 0.25 microM (S/N=6), respectively. The developed method was used to analyze GSH and GSSG in liver microdialysates of anesthetized Sprague Dawley male rats. The basal concentrations of GSH and GSSG in the liver microdialysates of male rats were found to be 4.73+/-2.08 microM (n=7) and 5.52+/-3.66 microM (n=7), respectively.     

Red diode laser induced fluorescence detection with a confocal microscope on a microchip for capillary electrophoresis

A highly sensitive laser induced fluorescence (LIF) detection system based on a 635 nm laser diode and cyanine-5 (Cy-5) dye, is described for use with a planar, microfluidic, capillary electrophoresis (CE) chip. The CE-chip is able to determine a protein biological threat agent simulant, ovalbumin (Ov), by performing an immunoassay separation of Cy-5 labeled anti-ovalbumin from its complex with Ov, in under 30 s. A confocal, epiluminescent detection system utilizing a photomultiplier tube gave optimum results with a 400 microm pinhole, an Omega 682DF22 emission filter, a 645DRLP02 dichroic mirror, a 634.54 +/- 5 nm excitation filter, and a Power Technology ACMO8 635 nm laser operated at 11.2 mW. Using this detector, a microchip CE device with a separation efficiency of 42,000 plates and an etch depth of 20 microm, gave a concentration detection limit of 9 pM Cy-5. This limit corresponds to the determination of 4560 injected molecules and detection of 900 of these molecules, given a probe volume of 1.6 pl and a probing efficiency of 20%.     

Determination of octopamine in human plasma by capillary electrophoresis with optical fiber light-emitting diode-induced fluorescence detection

A new analytical method based on capillary electrophoresis (CE) separation and optical fiber light-emitting diode (LED)-induced fluorescence detection has been developed for the determination of octopamine. Naphthalene-2,3-dicarboxaldehyde (NDA) was used for precolumn derivatization of octopamine. The separation and determination of the derivative was performed using a laboratory-built CE system with an optical fiber LED-induced fluorescence detector. Optimal separation was obtained at 20 kV using a background electrolyte solution consisting of 25 mM sodium borate (pH 9.2). High sensitivity detection was achieved by the optical fiber LED-induced fluorescence detection using a purple LED as the excitation source. The limit of detection (signal/noise=3) for octopamine was 5.0 x 10(-9)M. A calibration curve ranging from 1.0 x 10(-8) to 5.0 x 10(-7)M was shown to be linear. Using this method, the levels of octopamine in human plasma from healthy donors were determined.     

Optimization of a free separation of 30 free amino acids and peptides by capillary zone electrophoresis with indirect absorbance detection: a potential for quantification in physiological fluids

This report describes a rapid, single-run procedure, based on the optimization of capillary electrophoresis (CE) and indirect absorbance detection capabilities, which was developed for the separation and quantification of 30 underivatized physiological amino acids and peptides, usually present in biological fluids. p-Aminosalicylic acid buffered with sodium carbonate at pH 10.2+/-0.1 was used as the running electrolyte. Electrophoresis, carried out in a capillary (87 cm x 75 microm) at 15 kV potential (normal polarity), separated the examined compounds within 30 min. Limits of detection ranged from 1.93 to 20.08 micromol/l (median 6.71 micromol/l). The method was linear within the 50-200 micromol/l concentration range (r ranged from 0.684 to 0.989, median r=0.934). Within run migration times precision was good (median C.V.=0.7%). Less favorable within run peak area precision (median C.V.=6.6%) was obtained. The analytical procedure presented was successfully tested for separation and quantification of amino acids in physiological fluids, such as plasma or supernatant of macrophage cultures. Sample preparations require only a protein precipitation and dilution step.     

Capillary electrophoresis-based nanoscale assays for monitoring ecto-5'-nucleotidase activity and inhibition in preparations of recombinant enzyme and melanoma cell membranes

Powerful capillary electrophoresis (CE) methods were developed for monitoring the reaction of ecto-5'-nucleotidase (ecto-5'-NT, CD73), a (patho)biochemically important enzyme that hydrolyzes nucleoside-5'-monophosphates to the corresponding nucleosides. The enzymatic reaction was performed either before injection into the capillary (method A) or directly within the capillary (method B). In method A, separation of substrates and products was achieved within 8 min using an eCAP fused-silica capillary (20 cm effective length, 75 microM i.d., UV detection at 260 nm), 40 mM sodium borate buffer (pH 9.1), normal polarity, and a constant voltage of 15 kV. In method B, the sandwich technique was applied; substrate dissolved in reaction buffer (10mM Hepes [pH 7.4], 2mM MgCl2, and 1mM CaCl2) was hydrodynamically injected into a fused-silica capillary (30 cm, 75 microM i.d.), followed by enzyme (recombinant rat ecto-5'-NT) and subsequent injection of substrate solution. The reaction was initiated by the application of 1 kV voltage for 1 min. The voltage was turned off for 1 min and again turned on at a constant voltage of 15 kV to elute products (nucleosides) within 4 min using borate buffer (40 mM, pH 9.1). Thus, assays could be performed within 6 min, including enzymatic reaction, separation, and quantification of the formed nucleoside. The CE methods were used for measuring enzyme kinetics and for assaying inhibitors and substrates. In addition, the online assay was successfully applied to melanoma cell membrane preparations natively expressing the human ecto-5'-NT.     

Capillary electrophoretic immunoassay for alpha-fetoprotein with chemiluminescence detection

A capillary electrophoretic immunoassay with chemiluminescence detection (CEIA-CL) using a non-competitive format for analyzing tumor marker alpha-fetoprotein (AFP) has been developed. In this method, antigen (Ag) AFP reacts with an excess amount of horseradish peroxidase (HRP)-labeled antibody (Ab*). The free Ab* and the bound Ab*-Ag complex produced in the solution are separated by CE in a separation capillary. Then they catalyze the reaction of enzyme substrate luminol and H(2)O(2) in a reaction capillary following the separation capillary. Parameters affecting the CE separation and CL detection were investigated. Under the optimal conditions, the free Ab* and the Ab*-Ag complex were well separated within 4 min, the linear range and the detection limit (S/N=3) for AFP were 5-500 ng/ml and 0.85 ng/ml (1.2 x 10(-11)M), respectively. The proposed method has been applied satisfactorily in the analysis of human sera samples.     

Development of a capillary electrophoresis method for the screening of human urine for multiple drugs of abuse

A new capillary electrophoresis (CE) method was developed and validated for the screening of human urine for nineteen drugs of abuse. In order to achieve sufficient separation, the electrolyte composition was modified using beta-cyclodextrin (beta-CD) and organic solvents. To process each sample, a sequential injection-solid-phase extraction (SI-SPE) system was constructed. Using this device, matrix clean-up, extraction, and preconcentration of analytes were performed onto a C(18) cartridge. Optimal separation and detection were obtained using a background electrolyte consisting of 100mM phosphate adjusted to pH 6.0, with 20 mM beta-CD, 5% acetonitrile and 20% isopropanol. Electrokinetic injection was performed at 5 kV for 10s, separation voltage was 25 kV and column temperature was set to 25 degrees C. The separation was carried out in a 67.0 cm x 50 microm fused-silica capillary with UV detection at 214 nm. The combination of SI-SPE and sample stacking showed significant sensitivity enhancement with limits of detection in the range of 5-30 ng ml(-1). A validation study showed good reproducibility of both migration time (RSD=0.003-0.088%) and peak area (RSD=0.54-4.8%). Overall, this automated and miniaturized SI-SPE system provides a rapid, sensitive, and robust procedure for analysis; as well as minimizes sample and solvent consumption.     

Determination of oxalyl-coenzyme A decarboxylase activity in Oxalobacter formigenes and Lactobacillus acidophilus by capillary electrophoresis

Oxalyl-coenzyme A decarboxylase (OXC) is a key enzyme in the catabolism of the highly toxic oxalate, catalysing the decarboxylation of oxalyl-coenzyme A (Ox-CoA) to formyl-coenzyme A (For-CoA). In the present study, a capillary electrophoretic (CE) method was proposed for the assessment of the activity of recombinant OXC from two bacteria, namely Oxalobacter formigenes DSM 4420 and Lactobacillus acidophilus LA 14. In particular, the degradation of the substrate Ox-CoA occurring in the enzymatic reaction could be monitored by the off-line CE method. A capillary permanently coated with polyethylenimine (PEI) was used and in the presence of a neutral background electrolyte (50 mM phosphate buffer at pH 7.0), a reversal of the electroosmotic flow was obtained. Under these conditions, the anodic migration of Ox-CoA (substrate) and For-CoA (reaction product) occurred and their separation was accomplished in less than 12 min. The CE method was validated for selectivity, linearity (range of Ox-CoA within 0.005-0.650 mM), sensitivity (LOD of 1.5 microM at the detection wavelength of 254 nm), precision and accuracy. Steady state kinetic constants (V(max), K(m) or k') of OXC were finally estimated for both the bacteria showing that although L. acidophilus LA 14 provided a lower oxalate breakdown than O. formigenes DSM 4420, it could be a potentially useful probiotic in the prevention of diseases related to oxalate.     

Determination of 8-oxoguanine and 8-hydroxy-2'-deoxyguanosine in the rat cerebral cortex using microdialysis sampling and capillary electrophoresis with electrochemical detection

A rapid and sensitive method to determine 8-oxoguanine (8oxoG) and 8-hydroxydeoxyguanosine (8OHdG), biomarkers for oxidative DNA damage, in cerebral cortex microdialysate samples using capillary electrophoresis (CE) with electrochemical detection (CEEC) was developed. Samples were concentrated on-column using pH-mediated stacking for anions. On-column anodic detection was performed with a carbon fiber working electrode and laser-etched decoupler. The method is linear over the expected extracellular concentration range for 8oxoG and 8-OHdG during induced ischemia-reperfusion, with R.S.D. values 相似文献   

Tropane alkaloid analysis by chromatographic and electrophoretic techniques: An update

Tropane alkaloids like atropine are antidotes applied against organophosphorus intoxications. Atropine is toxic itself and should be closely monitored during treatment. Hence, simple, fast, and sensitive determination methods for tropane alkaloids in serum are desirable. Mostly adopted methods of analysis are gas chromatography (GC); high performance liquid chromatography (HPLC), and capillary electrophoresis (CE). Various liquid and solid capillary fillings used in micellar electrokinetic chromatography, microemulsion electrokinetic chromatography, capillary electrochromatography, and enantioseparation provide high versatility to CE applications. In HPLC, specialised columns enhance separation efficacy. Ultraviolet light detection is common practise, but recently sensitivity and analyte identification were enhanced by coupling GC, HPLC, and CE to mass spectrometry. Apart from medical treatment, tropane alkaloids, cocaine in particular, are abused with various intentions. Forensic analysis of tropane alkaloids and their metabolites comprises the additional difficulty of unequivocal drug identification. Because of severe legal consequences, sophisticated analytical methods were developed and may provide additional techniques for therapeutic drug monitoring. Examples from forensic cocaine analysis and from doping analysis are included in this review.     

Stereoisomeric separation of some flavanones using highly succinate-substituted α-cyclosophoro-octadecaoses as chiral additives in capillary electrophoresis

α-Cyclosophoro-octadecaoses (α-C18), produced by Rhodobacter sphaeroides, are mostly homogeneous in size with 18 glucose units per ring as the predominant form. α-C18s are linked by β-(1→4)-linkages and one α-(1→6)-linkage and are also known to be highly substituted by acetyl (0–2 per mol) and/or succinoyl groups (1–7 per mol). We isolated and purified α-C18 and successfully used it in capillary electrophoresis (CE) as a chiral additive for the separation of five flavanones and flavanone-7-O-glycosides, including naringenin, hesperetin, eriodictyol, homoeriodictyol, isosakuranetin, and hesperidin. Throughout the CE experiment with unsubstituted α-C18 (uα-C18) obtained after alkaline treatment of the isolated α-C18, we found that successful chiral separation critically depends on the presence of succinate substituents attached to α-C18 in CE, suggesting that succinoylation of α-C18 is decisive for effective stereoisomeric separation.     

Cinnamon extract prevents the insulin resistance induced by a high-fructose diet.

The aim of this study was to determine whether cinnamon extract (CE) would improve the glucose utilization in normal male Wistar rats fed a high-fructose diet (HFD) for three weeks with or without CE added to the drinking water (300 mg/kg/day). In vivo glucose utilization was measured by the euglycemic clamp technique. Further analyses on the possible changes in insulin signaling occurring in skeletal muscle were performed afterwards by Western blotting. At 3 mU/kg/min insulin infusions, the decreased glucose infusion rate (GIR) in HFD-fed rats (60 % of controls, p < 0.01) was improved by CE administration to the same level of controls (normal chow diet) and the improving effect of CE on the GIR of HFD-fed rats was blocked by approximately 50 % by N-monometyl-L-arginine. The same tendency was found during the 30 mU/kg/min insulin infusions. There were no differences in skeletal muscle insulin receptor (IR)-beta, IR substrate (IRS)-1, or phosphatidylinositol (PI) 3-kinase protein content in any groups. However, the muscular insulin-stimulated IR-beta and IRS-1 tyrosine phosphorylation levels and IRS-1 associated with PI 3-kinase in HFD-fed rats were only 70 +/- 9 %, 76 +/- 5 %, and 72 +/- 6 % of controls (p < 0.05), respectively, and these decreases were significantly improved by CE treatment. These results suggest that early CE administration to HFD-fed rats would prevent the development of insulin resistance at least in part by enhancing insulin signaling and possibly via the NO pathway in skeletal muscle.     

Protein analysis by membrane preconcentration–capillary electrophoresis: systematic evaluation of parameters affecting preconcentration and separation

Fast and efficient analysis of proteins in physiological fluids is of great interest to researchers and clinicians alike. Capillary electrophoresis (CE) has proven to be a potentially valuable tool for the separation of proteins in specimens. However, a generally acknowledged drawback of this technique is the limited sample volumes which can be loaded onto the CE capillary which results in a poor concentration limit of detection. In addition, matrix components in samples may also interfere with separation and detection of analytes. Membrane preconcentration–CE (mPC–CE) has proved to be effective in overcoming these problems. In this report, we describe the systematic evaluation of parameters affecting on-line preconcentration/clean-up and separation of protein mixtures by mPC–CE. Method development was carried out with a standard mixture of proteins (lysozyme, myoglobin, carbonic anhydrase, and human serum albumin). First, using MALDI-TOF-MS, membrane materials with cation-exchange (R-SO₃H) or hydrophobic (C₂, C₈, C₁₈, SDB) characteristics were evaluated for their potential to retain proteins in mPC cartridges. Hydrophobic membranes were found most suitable for this application. Next, all mPC–CE analysis of protein samples were performed in polybrene coated capillaries and parameters affecting sample loading, washing and elution, such as the composition and volume of the elution solvent were investigated. Furthermore, to achieve optimal mPC–CE performance for the separation of protein mixtures parameters affecting postelution focusing and electrophoresis, including the composition of the background electrolyte and a trailing stacking buffer were varied. Optimal conditions for mPC–CE analysis of proteins using a C₂ impregnated membrane preconcentration (mPC) cartridge were achieved with a background electrolyte of 5% acetic acid and 2 mM ammonium acetate, 60 nl of 80% acetonitrile in H₂O as an elution solvent, and 60 nl of 0.5% ammonium hydroxide as a trailing stacking buffer. The developed method was used successfully to separate proteins in aqueous humor, which contains numerous proteins in a complex matrix of salts.