Genomic species typing of acinetobacters by polymerase chain reaction amplification of the recA gene

Abstract The recA gene has been used as a target in screening for the presence of acinetobacters on the genospecies level and differentiation of relevant acinetobacter species from one another by PCR. Primers deduced from known recA gene sequences of Acinetobacter calcoaceticus and Neisseria gonorrhoeae allowed the amplification of DNAs from all Acinetobacter genospecies. The size of the amplified DNA fragment from all genospecies tested was approximately 435–500 bp relative to DNA size markers. The amplified products were examined further by restriction fragment length polymorphism (RFLP) analysis. Restriction analysis with only two enzymes, Mbo I and Hin fI, enabled us to identify all known genospecies. Since this method uses conserved recA gene sequences for primers, it is expected to be applicable for the identification of most bacterial species.     

Export requirements of pneumolysin in Streptococcus pneumoniae

Streptococcus pneumoniae is a major causative agent of otitis media, pneumonia, bacteremia, and meningitis. Pneumolysin (Ply), a member of the cholesterol-dependent cytolysins (CDCs), is produced by virtually all clinical isolates of S. pneumoniae, and ply mutant strains are severely attenuated in mouse models of colonization and infection. In contrast to all other known members of the CDC family, Ply lacks a signal peptide for export outside the cell. Instead, Ply has been hypothesized to be released upon autolysis or, alternatively, via a nonautolytic mechanism that remains undefined. We show that an exogenously added signal sequence is not sufficient for Sec-dependent Ply secretion in S. pneumoniae but is sufficient in the surrogate host Bacillus subtilis. Previously, we showed that Ply is localized primarily to the cell wall compartment in the absence of detectable cell lysis. Here we show that Ply released by autolysis cannot reassociate with intact cells, suggesting that there is a Ply export mechanism that is coupled to cell wall localization of the protein. This putative export mechanism is capable of secreting a related CDC without its signal sequence. We show that B. subtilis can export Ply, suggesting that the export pathway is conserved. Finally, through truncation and domain swapping analyses, we show that export is dependent on domain 2 of Ply.     

Detection of Streptococcus pneumoniae DNA by using polymerase chain reaction and microwell hybridization with Europium-labelled probes

The present paper describes a novel modification of polymerase chain reaction (PCR) for the detection of Streptococcus pneumoniae DNA in clinical specimens. PCR was based on the detection of a 209-base pair segment of the S. pneumoniae pneumolysin gene. For the demonstration of the amplification product, microwell hybridization with a Europium-labelled oligonucleotide probe complementary to a biotinylated strand of the PCR product was performed, and the presence of the PCR product was monitored by time-resolved fluorescence (TRF) of the Europium chelate. The sensitivity of the assay for purified S. pneumoniae DNA was 50 fg DNA corresponding to 20 genome equivalents of S. pneumoniae DNA. The efficiency of the hybridization step was monitored by using known amounts of synthetic target oligonucleotides as standards. Sensitivity of 3×10⁸ molecules per individual reaction well was achieved with a 30-min attachment time and a 3-h hybridization time.

Detection of PCR-amplified products by the microwell hybridization technique and TRF was compared to agarose gel electrophoresis in 50 middle ear fluid samples obtained from children with acute otitis media. The agarose gel and TRF detection methods identified all culture-positive samples, but both were also positive for 55% of the culture-negative samples. The results suggest that the detection of amplified PCR products by microwell hybridization using Europium-labelled oligonucleotides is a reliable method for the demonstration of the pneumolysin gene fragment. Furthermore, the method is suitable for automation and, thus, for testing high numbers of samples. The clinical significance of the PCR findings remains to be studied.     

Sex identification of pigs using polymerase chain reaction amplification of the amelogenin gene

The amelogenin (AMEL) gene exists on both sex chromosomes of various mammalian species and the length and sequence of the noncoding regions differ between the two chromosome-specific alleles. Because both forms can be amplified using a single primer set, the use of AMEL in polymerase chain reaction (PCR)-based methods has facilitated sex identification in various mammalian species, including cattle, sheep and humans. In this study, we designed PCR primers to yield different-sized products from the AMEL genes on the X (AMELX) and Y (AMELY) chromosomes of pigs. PCR amplification of genomic DNA samples collected from various breeds of pigs (European breeds: Landrace, Large White, Duroc and Berkshire; Chinese breeds: Meishan and Jinhua and their crossbreeds) yielded the expected products. For all breeds, DNA from male pigs produced two bands (520 and 350 bp; AMELX and AMELY, respectively), whereas samples from female pigs generated only the 520 bp product. We then tested the use of PCR of AMEL for sex identification of in vitro-produced (IVP) porcine embryos sampled at 2 or 5 to 6 days after fertilization; germinal vesicle (GV)-stage oocytes and electroactivated embryos were used as controls. More than 88% of the GV-stage oocytes and electroactivated embryos yielded a single 520 bp single band and about 50% of the IVP embryos tested produced both bands. Our findings show that PCR analysis of the AMEL gene is reliable for sex identification of pigs and porcine embryos.     

Differential amplification of rRNA genes by polymerase chain reaction.

The polymerase chain reaction (PCR) is used widely to recover rRNA genes from naturally occurring communities for analysis of population constituents. We have found that this method can result in differential amplification of different rRNA genes. In particular, rDNAs of extremely thermophilic archaebacteria often cannot be amplified by the usual PCR methods. The addition of 5% (wt/vol) acetamide to a PCR mixture containing both archaebacterial and yeast DNA templates minimized nonspecific annealing of the primers and prevented preferential amplification of the yeast small-subunit rRNA genes.     

Differential amplification of rRNA genes by polymerase chain reaction.

The polymerase chain reaction (PCR) is used widely to recover rRNA genes from naturally occurring communities for analysis of population constituents. We have found that this method can result in differential amplification of different rRNA genes. In particular, rDNAs of extremely thermophilic archaebacteria often cannot be amplified by the usual PCR methods. The addition of 5% (wt/vol) acetamide to a PCR mixture containing both archaebacterial and yeast DNA templates minimized nonspecific annealing of the primers and prevented preferential amplification of the yeast small-subunit rRNA genes.     

Detection of Bacteroides fragilis in clinical specimens by polymerase chain reaction amplification of the neuraminidase gene

The polymerase chain reaction (PCR) was used in an attempt to detect Bacteroides fragilis by amplifying a segment of the gene encoding B. fragilis neuraminidase. Forty-five reference strains representing 45 species and 113 clinical isolates were tested. Only B. fragilis was PCR positive, except for Bacteroides merdae ATCC 43184, which gave a band by ethidium bromide staining that showed no signal by Southern hybridization. Using a protocol that employed DNA extraction by Sepa Gene kit and a highly sensitive digoxigenin-chemiluminescence detection system, detection of B. fragilis by PCR was in complete agreement with culture results for 44 clinical specimens from which a wide range of aerobic and anaerobic organisms and fungi were recovered.     

Aseptic meningitis caused by Leptospira spp diagnosed by polymerase chain reaction

Leptospirosis is a zoonotic disease caused by the pathogenic Leptospira spp. The clinical presentations are diverse, ranging from undifferentiated fever to fulminant disease including meningeal forms. The neurological leptospirosis forms are usually neglected. The aim of this study was to investigate leptospirosis as the cause of aseptic meningitis using different diagnostic techniques including the polymerase chain reaction (PCR). Thirty-nine cerebrospinal fluid (CSF) samples from patients presenting with meningeal abnormalities, predominance of lymphocytes and negative results by traditional microbiological tests were processed by leptospiral culture, anti-leptospiral antibody response and PCR. Leptospira spp DNA was detected in 23 (58.97%) of the CSF samples. Anti-leptospiral antibodies were found in 13 (33.33%) CSF samples. Twelve CSF samples were positive by PCR assay and negative by microscopic agglutination test (MAT) assay. Two CSF samples were positive by MAT and negative by PCR. The positive and negative agreement between both tests was 11 and 14, respectively. CSF samples from six cases of unknown diagnosis were positive by PCR assay. Eight cases showed positive results using PCR and MAT. Leptospirosis could be detected by PCR assay from the 3rd-26th day after illness onset. The sensitivity of the PCR was assessed with confirmed cases of leptospirosis (by MAT) and found to be 89.5%. All CSFs were negative by culture. PCR was found to be a powerful tool for diagnosing meningitis cases of leptospirosis. We recommend that it may be used as a supplementary diagnostic tool, especially in the early stages of the disease, when other diagnostic techniques such as serology are not sensitive.     

Identification of Candida albicans by polymerase chain reaction amplification of CaYST1 gene intron fragment

A single pair of primers, deduced from the intron nucleotide sequence of the Candida albicans CaYST1 gene, was used in PCR analysis performed with both genomic DNA and whole cells of clinical isolates of Candida species and other microorganisms. All the clinical C. albicans isolates generated the expected 310 bp amplicon; other Candida species as well as laboratory strains belonging to other fungal genera failed to amplify any DNA fragment, except for Candida pseudotropicalis (amplicon of 1200 bp), Kluyveromices marxianus (amplicon of 1250 bp) and Cryptococcus neoformans (several amplicons longer than 1200 bp). Unusual C. albicans isolates from Africa also yielded the expected 310 bp amplicon. These results indicate that genes containing intron sequences may be useful to design species-specific primers for identification of fungal strains by PCR. The sensitivity of the method was evaluated for C. albicans genomic DNA by using both various DNA concentrations (224 ng to 2.7 pg) and different cell amounts (10(7); to 5 cells). The results obtained may be useful in earlier detection of candidiasis.     

Diagnosis of bovine freemartinism by the polymerase chain reaction method

Summary. Using sex chromosome specific primers, leucocyte chimaerism in heterosexual bovine female twins was identified by combining polymerase chain reaction (PCR) and restriction enzyme digests.     

替代失活法构建变形链球菌LuxS基因缺陷株

目的 LuxS基因是变形链球菌生物膜早期形成过程中的关键基因,构建该基因的缺陷菌。方法采用长臂同源多聚酶链反应（LFH-PCR）方法构建含红霉素耐药基因片段的LuxS基因上、下游同源序列的连接片段,转化到变形链球菌中,在红霉素的平板上筛选缺陷菌株,并采用PCR鉴定。结果对变形链球菌LuxS基因缺陷菌株进行PCR和DNA序列测定分析证实构建成功。结论成功构建出变形链球菌LuxS基因的缺陷菌株,为后期针对变形链球菌LuxS基因的相关研究奠定基础。     

Identification of pathogenic yeast species by polymerase chain reaction amplification of the RPS0 gene intron fragment

Aims: This work focuses on the development of a method for the identification of pathogenic yeast. With this aim, we target the nucleotide sequence of the RPS0 gene of pathogenic yeast species with specific PCR primers. PCR analysis was performed with both the genomic DNA, whole cells of clinical isolates of Candida species and clinical samples. Methods and Results: A single pairs of primers, deduced from the nucleotide sequence of the RPS0 gene from pathogenic yeast, were used in PCR analysis performed with both the genomic DNA and whole cells of clinical isolates of Candida species and clinical samples. The primers designed are highly specific for their respective species and produce amplicons of the expected sizes and fail to amplify any DNA fragment from the other species tested. The set of primers was tested successfully for the identification of yeast from colonies, blood cultures and clinical samples. These results indicate that genes containing intron sequences may be useful for designing species‐specific primers for the identification of fungal strains by PCR. The sensitivity of the method with genomic DNA was evaluated with decreasing DNA concentrations (200 ng to 1 pg) and different cell amounts (10⁷–10⁵ cells). Conclusion: The results obtained show that the amplification of RPS0 sequences may be suitable for the identification of pathogenic and other yeast species. Significance and Impact of the Study: Identification of Candida species using molecular approaches with high discriminatory power is important in determining adequate measures for the interruption of transmission of this yeast. The approach described in this work is based on standard technology, and it is specific, sensitive and does not involve complex and expensive equipment. Furthermore, the method developed in this work not only can be used in eight yeast species, but also provides the basis to design primers for other fungi species of clinical, industrial or environmental interest.     

Rapid method for processing soil samples for polymerase chain reaction amplification of specific gene sequences.

Bacterial cells can be differentially separated from soil colloids on the basis of their buoyant densities. By using this principle, a modified sucrose gradient centrifugation protocol has been developed for separating bacterial cells from most of the soil colloids. Since the bacterial cell suspension still contained some colloidal soil particles, which inhibited polymerase chain reaction amplification, a new "double" polymerase chain reaction method of analysis was adopted for amplification of Tn5-specific gene sequences. This new protocol allowed rapid detection of small numbers (1 to 10 CFU/g) of bacterial cells present in soil samples.     

Detection of Streptococcus anginosus from saliva by real-time polymerase chain reaction

AIMS: The purpose of the present investigation was to assess the salivary levels of Streptococcus anginosus in periodontitis patients. METHODS AND RESULTS: The salivary levels of Strep. anginosus were assessed using real-time polymerase chain reaction (PCR). Streptococcus anginosus was detected in 28 of 37 (75.6%) of periodontitis patients and in three of the 20 (15%) healthy subjects. The mean values for bleeding on probing and probing depth in positive patients were statistically higher than those in negative patients. A significant decrease in Strep. anginosus levels was observed after periodontal treatment. CONCLUSIONS: Although the levels of Strep. anginosus are extremely low, they may reflect the status of periodontal health. SIGNIFICANCE AND IMPACT OF THE STUDY: Real-time PCR is a useful method for obtaining the relative quantities of Strep. anginosus from saliva samples and for monitoring the effect of therapy.     

Rapid method for processing soil samples for polymerase chain reaction amplification of specific gene sequences.

Bacterial cells can be differentially separated from soil colloids on the basis of their buoyant densities. By using this principle, a modified sucrose gradient centrifugation protocol has been developed for separating bacterial cells from most of the soil colloids. Since the bacterial cell suspension still contained some colloidal soil particles, which inhibited polymerase chain reaction amplification, a new "double" polymerase chain reaction method of analysis was adopted for amplification of Tn5-specific gene sequences. This new protocol allowed rapid detection of small numbers (1 to 10 CFU/g) of bacterial cells present in soil samples.     

Characterization of polymerase chain reaction amplification of specific alleles

Under certain conditions, polymerase chain reaction (PCR) can be used to differentially amplify one allele over another. To characterize the phenomenon, we have made a series of PCR primers and determined whether differential amplification could be detected after agarose gel electrophoresis. Two allele pairs were examined; one pair represents a transversion and one pair represents a transition. The following conclusions emerge: (i) when the 3' or the 3' penultimate base of the oligonucleotide mismatched an allele, no amplification product could be detected; (ii) when the mismatches were 3 and 4 bases from the 3' end of the primer, differential amplification was still observed, but only at certain concentrations of magnesium chloride; (iii) the mismatched allele can be detected in the presence of a 40-fold excess of the matched allele; (iv) primers as short as 13 nucleotides were effective; and (v) the specificity of the amplification could be overwhelmed by greatly increasing the concentration of target DNA.